Bug#607906: oops and panic after hardware detection
- To: 607906@bugs.debian.org
- Subject: Bug#607906: oops and panic after hardware detection
- From: Ferenc Wagner <wferi@niif.hu>
- Date: Wed, 12 Jan 2011 13:15:35 +0100
- Message-id: <[🔎] 878vyqfhco.fsf@tac.ki.iif.hu>
- Reply-to: Ferenc Wagner <wferi@niif.hu>, 607906@bugs.debian.org
- In-reply-to: <87bp3ojzgz.fsf_-_@tac.ki.iif.hu> (Ferenc Wagner's message of "Mon, 10 Jan 2011 21:06:04 +0100")
- References: <20101224004339.9860.21960.reportbug@tac.ki.iif.hu> <handler.607906.B.12931514266754.ack@bugs.debian.org> <87bp3ojzgz.fsf_-_@tac.ki.iif.hu>
The installed squeeze system also exhibits the same problem: it can't
boot with the "quiet" option on the command line. However, the
2.6.37-trunk-686 kernel manages without crashing, although only after a
substantial delay (full kern.log attached -- btw. which disposition do
you prefer?):
[ 3.603840] mptbase: ioc1: Initiating bringup
[...]
[ 33.600014] mptbase: ioc1: ERROR - Wait IOC_READY state (0x20000000) timeout(15)!
[...]
[ 82.676011] mptscsih: ioc0: target reset: SUCCESS (sc=f5bc6f00)
2.6.37 also does not output "ACPI: Invalid link context" as 2.6.32 does.
Without the "quiet" option, both 2.6.32 and 2.6.37 discover the devices
quickly.
Thanks,
Feri.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37-trunk-686 (Debian 2.6.37-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 SMP Thu Jan 6 14:39:08 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005ffeb2c0 (usable)
[ 0.000000] BIOS-e820: 000000005ffeb2c0 - 000000005fff0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: /eserver xSeries 345 -[867091X]-, BIOS -[GEE152AUS-1.15]- 11/14/2003
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x5ffeb max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c009d540] 9d540
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 5f60e000 - 5ffea000
[ 0.000000] Allocated new RAMDISK: 36e22000 - 377fdd16
[ 0.000000] Move RAMDISK from 000000005f60e000 - 000000005ffe9d15 to 36e22000 - 377fdd15
[ 0.000000] ACPI: RSDP 000fdfc0 00014 (v00 IBM )
[ 0.000000] ACPI: RSDT 5ffeff80 00030 (v01 IBM SERONYXP 00001000 IBM 45444F43)
[ 0.000000] ACPI: FACP 5ffeff00 00074 (v01 IBM SERONYXP 00001000 IBM 45444F43)
[ 0.000000] ACPI: DSDT 5ffeb2c0 04A4E (v01 IBM SERGEODE 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 5ffefe00 00040
[ 0.000000] ACPI: APIC 5ffefe40 00092 (v01 IBM SERONYXP 00001000 IBM 45444F43)
[ 0.000000] ACPI: ASF! 5ffefd80 0004B (v16 IBM SERONYXP 00000001 IBM 45444F43)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 647MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0005ffeb
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0005ffeb
[ 0.000000] On node 0 totalpages: 393080
[ 0.000000] free_area_init_node: node 0, pgdat c13db440, node_mem_map f6221200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1296 pages used for memmap
[ 0.000000] HighMem zone: 164573 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x488
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15
[ 0.000000] ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 16-31
[ 0.000000] ACPI: IOAPIC (id[0x0c] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 12, version 17, address 0xfec02000, GSI 32-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ7 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5c00000 s26944 r0 d22208 u1048576
[ 0.000000] pcpu-alloc: s26944 r0 d22208 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390008
[ 0.000000] Kernel command line: root=/dev/mapper/grid-root ro rootdelay=10 console=tty0 console=ttyS0,115200n8r panic=10 quiet initrd=/initrd.img-2.6.37-trunk-686 BOOT_IMAGE=/vmlinuz-2.6.37-trunk-686
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005ffeb)
[ 0.000000] Memory: 1543780k/1572780k available (2611k kernel code, 28540k reserved, 1375k data, 384k init, 663476k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13e5000 - 0xc1445000 ( 384 kB)
[ 0.000000] .data : 0xc128cdf0 - 0xc13e4b00 (1375 kB)
[ 0.000000] .text : 0xc1000000 - 0xc128cdf0 (2611 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3060.469 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6120.93 BogoMIPS (lpj=12241876)
[ 0.004013] pid_max: default: 32768 minimum: 301
[ 0.004041] Security Framework initialized
[ 0.004048] SELinux: Disabled at boot.
[ 0.004072] Mount-cache hash table entries: 512
[ 0.004239] Initializing cgroup subsys ns
[ 0.004244] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004247] Initializing cgroup subsys cpuacct
[ 0.004253] Initializing cgroup subsys devices
[ 0.004256] Initializing cgroup subsys freezer
[ 0.004258] Initializing cgroup subsys net_cls
[ 0.004261] Initializing cgroup subsys blkio
[ 0.004305] CPU: Physical Processor ID: 0
[ 0.004308] CPU: Processor Core ID: 0
[ 0.004311] mce: CPU supports 4 MCE banks
[ 0.004325] CPU0: Thermal monitoring enabled (TM1)
[ 0.004338] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.004349] ... version: 0
[ 0.004351] ... bit width: 40
[ 0.004353] ... generic registers: 18
[ 0.004355] ... value mask: 000000ffffffffff
[ 0.004358] ... max period: 0000007fffffffff
[ 0.004360] ... fixed-purpose events: 0
[ 0.004362] ... event mask: 000000000003ffff
[ 0.008060] ACPI: Core revision 20101013
[ 0.015846] Enabling APIC mode: Flat. Using 3 I/O APICs
[ 0.016481] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056178] CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 05
[ 0.060000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060000] CPU 1 irqstacks, hard=f5894000 soft=f5896000
[ 0.060000] Booting Node 0, Processors #1
[ 0.008000] Initializing CPU#1
[ 0.148025] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148145] CPU 2 irqstacks, hard=f58a2000 soft=f58a4000
[ 0.148149] #2
[ 0.008000] Initializing CPU#2
[ 0.240042] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.240190] CPU 3 irqstacks, hard=f58b2000 soft=f58b4000
[ 0.240197] #3 Ok.
[ 0.008000] Initializing CPU#3
[ 0.332018] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.332061] Brought up 4 CPUs
[ 0.332065] Total of 4 processors activated (24482.13 BogoMIPS).
[ 0.333290] devtmpfs: initialized
[ 0.333290] regulator: core version 0.5
[ 0.333290] regulator: dummy:
[ 0.333290] NET: Registered protocol family 16
[ 0.333290] ACPI: bus type pci registered
[ 0.333290] PCI: PCI BIOS revision 2.10 entry at 0xfd7dc, last bus=8
[ 0.333290] PCI: Using configuration type 1 for base access
[ 0.333290] bio: create slab <bio-0> at 0
[ 0.336419] ACPI: EC: Look up EC in DSDT
[ 0.339359] ACPI: Interpreter enabled
[ 0.339364] ACPI: (supports S0 S4 S5)
[ 0.339384] ACPI: Using IOAPIC for interrupt routing
[ 0.340347] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[ 0.346099] ACPI: No dock devices found.
[ 0.346107] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.348213] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-01])
[ 0.352368] pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored)
[ 0.352372] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored)
[ 0.352376] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.352380] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xffffffff] (ignored)
[ 0.352383] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x24ff] (ignored)
[ 0.352387] pci_root PNP0A03:00: host bridge window [io 0x03bc-0x03bf] (ignored)
[ 0.352390] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.352403] pci 0000:00:00.0: [1166:0014] type 0 class 0x000600
[ 0.352438] pci 0000:00:00.1: [1166:0014] type 0 class 0x000600
[ 0.352467] pci 0000:00:00.2: [1166:0014] type 0 class 0x000600
[ 0.352512] pci 0000:00:06.0: [1002:4752] type 0 class 0x000300
[ 0.352533] pci 0000:00:06.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.352545] pci 0000:00:06.0: reg 14: [io 0x2400-0x24ff]
[ 0.352557] pci 0000:00:06.0: reg 18: [mem 0xfebff000-0xfebfffff]
[ 0.352595] pci 0000:00:06.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.352617] pci 0000:00:06.0: supports D1 D2
[ 0.352643] pci 0000:00:0f.0: [1166:0201] type 0 class 0x000600
[ 0.352695] pci 0000:00:0f.1: [1166:0212] type 0 class 0x000101
[ 0.352711] pci 0000:00:0f.1: reg 10: [io 0x01f0-0x01f7]
[ 0.352722] pci 0000:00:0f.1: reg 14: [io 0x03f4-0x03f7]
[ 0.352733] pci 0000:00:0f.1: reg 18: [io 0x0170-0x0177]
[ 0.352743] pci 0000:00:0f.1: reg 1c: [io 0x0374-0x0377]
[ 0.352754] pci 0000:00:0f.1: reg 20: [io 0x0700-0x070f]
[ 0.352789] pci 0000:00:0f.2: [1166:0220] type 0 class 0x000c03
[ 0.352805] pci 0000:00:0f.2: reg 10: [mem 0xfebfe000-0xfebfefff]
[ 0.352870] pci 0000:00:0f.3: [1166:0225] type 0 class 0x000601
[ 0.352953] pci 0000:00:10.0: [1166:0101] type 0 class 0x000600
[ 0.353005] pci 0000:00:10.2: [1166:0101] type 0 class 0x000600
[ 0.353060] pci 0000:00:11.0: [1166:0101] type 0 class 0x000600
[ 0.353112] pci 0000:00:11.2: [1166:0101] type 0 class 0x000600
[ 0.353180] pci_bus 0000:00: on NUMA node 0
[ 0.353185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.355544] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 02-03])
[ 0.356197] pci_bus 0000:02: on NUMA node 0
[ 0.356201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.356817] ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus 04-05])
[ 0.357445] pci_bus 0000:04: on NUMA node 0
[ 0.357449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
[ 0.358635] ACPI: PCI Root Bridge [PCI3] (domain 0000 [bus 06-07])
[ 0.360925] pci_root PNP0A03:03: host bridge window [mem 0xfa000000-0xfbffffff] (ignored)
[ 0.360929] pci_root PNP0A03:03: host bridge window [io 0x2500-0x257f] (ignored)
[ 0.360954] pci 0000:06:08.0: [8086:1010] type 0 class 0x000200
[ 0.360976] pci 0000:06:08.0: reg 10: [mem 0xfbfe0000-0xfbffffff 64bit]
[ 0.360998] pci 0000:06:08.0: reg 20: [io 0x2500-0x253f]
[ 0.361032] pci 0000:06:08.0: PME# supported from D0 D3hot D3cold
[ 0.361037] pci 0000:06:08.0: PME# disabled
[ 0.361064] pci 0000:06:08.1: [8086:1010] type 0 class 0x000200
[ 0.361085] pci 0000:06:08.1: reg 10: [mem 0xfbfc0000-0xfbfdffff 64bit]
[ 0.361106] pci 0000:06:08.1: reg 20: [io 0x2540-0x257f]
[ 0.361140] pci 0000:06:08.1: PME# supported from D0 D3hot D3cold
[ 0.361144] pci 0000:06:08.1: PME# disabled
[ 0.361183] pci_bus 0000:06: on NUMA node 0
[ 0.361187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT]
[ 0.362459] ACPI: PCI Root Bridge [PCI4] (domain 0000 [bus 08])
[ 0.364749] pci_root PNP0A03:04: host bridge window [mem 0xf8000000-0xf9ffffff] (ignored)
[ 0.364753] pci_root PNP0A03:04: host bridge window [io 0x2580-0xffff] (ignored)
[ 0.364777] pci 0000:08:07.0: [1000:0030] type 0 class 0x000100
[ 0.364797] pci 0000:08:07.0: reg 10: [io 0x2600-0x26ff]
[ 0.364810] pci 0000:08:07.0: reg 14: [mem 0xf9ff0000-0xf9ffffff 64bit]
[ 0.364823] pci 0000:08:07.0: reg 1c: [mem 0xf9fe0000-0xf9feffff 64bit]
[ 0.364839] pci 0000:08:07.0: reg 30: [mem 0x00000000-0x000fffff pref]
[ 0.364861] pci 0000:08:07.0: supports D1 D2
[ 0.364885] pci 0000:08:07.1: [1000:0030] type 0 class 0x000100
[ 0.364904] pci 0000:08:07.1: reg 10: [io 0x2700-0x27ff]
[ 0.364917] pci 0000:08:07.1: reg 14: [mem 0xf9fd0000-0xf9fdffff 64bit]
[ 0.364930] pci 0000:08:07.1: reg 1c: [mem 0xf9fc0000-0xf9fcffff 64bit]
[ 0.364946] pci 0000:08:07.1: reg 30: [mem 0x00000000-0x000fffff pref]
[ 0.364968] pci 0000:08:07.1: supports D1 D2
[ 0.365008] pci_bus 0000:08: on NUMA node 0
[ 0.365012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT]
[ 0.365335] ACPI: PCI Interrupt Link [LP00] (IRQs) *0, disabled.
[ 0.365500] ACPI: PCI Interrupt Link [LP01] (IRQs) *0, disabled.
[ 0.365670] ACPI: PCI Interrupt Link [LP02] (IRQs) *0, disabled.
[ 0.365832] ACPI: PCI Interrupt Link [LP03] (IRQs) *0, disabled.
[ 0.365994] ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
[ 0.366154] ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
[ 0.366315] ACPI: PCI Interrupt Link [LP06] (IRQs) *0, disabled.
[ 0.366474] ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled.
[ 0.366635] ACPI: PCI Interrupt Link [LP08] (IRQs) *0, disabled.
[ 0.366796] ACPI: PCI Interrupt Link [LP09] (IRQs) *0, disabled.
[ 0.366961] ACPI: PCI Interrupt Link [LP0A] (IRQs *10)
[ 0.367124] ACPI: PCI Interrupt Link [LP0B] (IRQs *9)
[ 0.367288] ACPI: PCI Interrupt Link [LP0C] (IRQs *9)
[ 0.367451] ACPI: PCI Interrupt Link [LP0D] (IRQs *3)
[ 0.367614] ACPI: PCI Interrupt Link [LP0E] (IRQs *5)
[ 0.367773] ACPI: PCI Interrupt Link [LP0F] (IRQs) *0, disabled.
[ 0.367935] ACPI: PCI Interrupt Link [LP10] (IRQs) *0, disabled.
[ 0.368117] ACPI: PCI Interrupt Link [LP11] (IRQs) *0, disabled.
[ 0.368278] ACPI: PCI Interrupt Link [LP12] (IRQs) *0, disabled.
[ 0.368442] ACPI: PCI Interrupt Link [LP13] (IRQs) *0, disabled.
[ 0.368606] ACPI: PCI Interrupt Link [LP14] (IRQs) *0, disabled.
[ 0.368770] ACPI: PCI Interrupt Link [LP15] (IRQs) *0, disabled.
[ 0.368931] ACPI: PCI Interrupt Link [LP16] (IRQs) *0, disabled.
[ 0.369092] ACPI: PCI Interrupt Link [LP17] (IRQs) *0, disabled.
[ 0.369256] ACPI: PCI Interrupt Link [LP18] (IRQs) *0, disabled.
[ 0.369421] ACPI: PCI Interrupt Link [LP19] (IRQs) *0, disabled.
[ 0.369583] ACPI: PCI Interrupt Link [LP1A] (IRQs) *0, disabled.
[ 0.369749] ACPI: PCI Interrupt Link [LP1B] (IRQs) *0, disabled.
[ 0.369914] ACPI: PCI Interrupt Link [LP1C] (IRQs) *0, disabled.
[ 0.370078] ACPI: PCI Interrupt Link [LP1D] (IRQs) *0, disabled.
[ 0.370240] ACPI: PCI Interrupt Link [LP1E] (IRQs) *0, disabled.
[ 0.370401] ACPI: PCI Interrupt Link [LP1F] (IRQs) *0, disabled.
[ 0.370567] ACPI: PCI Interrupt Link [LPUS] (IRQs *11)
[ 0.370599] HEST: Table is not found!
[ 0.370683] vgaarb: device added: PCI:0000:00:06.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.370698] vgaarb: loaded
[ 0.370731] PCI: Using ACPI for IRQ routing
[ 0.370731] PCI: pci_cache_line_size set to 64 bytes
[ 0.370731] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 0.370731] reserve RAM buffer: 000000005ffeb2c0 - 000000005fffffff
[ 0.370731] Switching to clocksource tsc
[ 0.370731] pnp: PnP ACPI init
[ 0.370731] ACPI: bus type pnp registered
[ 0.371813] pnp 00:00: [io 0x03c0-0x03df window]
[ 0.371817] pnp 00:00: [io 0x03b0-0x03bb window]
[ 0.371820] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.371827] pnp 00:00: [bus 00-01]
[ 0.371830] pnp 00:00: [mem 0xfc000000-0xffffffff window]
[ 0.371833] pnp 00:00: [io 0x03e0-0x24ff window]
[ 0.371836] pnp 00:00: [io 0x03bc-0x03bf window]
[ 0.371839] pnp 00:00: [io 0x0000-0x03af window]
[ 0.371923] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.373073] pnp 00:01: [io 0x0510-0x0517]
[ 0.373077] pnp 00:01: [io 0x0504-0x0507]
[ 0.373080] pnp 00:01: [io 0x0500-0x0503]
[ 0.373082] pnp 00:01: [io 0x0420-0x0427]
[ 0.373085] pnp 00:01: [io 0x0460-0x0461]
[ 0.373088] pnp 00:01: [io 0x002e-0x002f]
[ 0.373156] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373631] pnp 00:02: [irq 1]
[ 0.373635] pnp 00:02: [io 0x0064]
[ 0.373637] pnp 00:02: [io 0x0060]
[ 0.373676] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.373845] pnp 00:03: [irq 12]
[ 0.373885] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.374336] pnp 00:04: [dma 2]
[ 0.374342] pnp 00:04: [irq 6]
[ 0.374345] pnp 00:04: [io 0x03f0-0x03f5]
[ 0.374399] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.374780] pnp 00:05: [irq 4]
[ 0.374783] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.375165] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.375227] pnp 00:06: [io 0x0020-0x0021]
[ 0.375230] pnp 00:06: [io 0x00a0-0x00a1]
[ 0.375271] pnp 00:06: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.375292] pnp 00:07: [dma 4]
[ 0.375295] pnp 00:07: [io 0x0000-0x001f]
[ 0.375298] pnp 00:07: [io 0x0080-0x008f]
[ 0.375301] pnp 00:07: [io 0x00c0-0x00df]
[ 0.375341] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.375371] pnp 00:08: [io 0x0070-0x0073]
[ 0.375377] pnp 00:08: [irq 8]
[ 0.375423] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.375443] pnp 00:09: [io 0x0061]
[ 0.375486] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.375507] pnp 00:0a: [io 0x00f0-0x00ff]
[ 0.375513] pnp 00:0a: [irq 13]
[ 0.375555] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.375578] pnp 00:0b: [io 0x0092]
[ 0.375581] pnp 00:0b: [io 0x00eb-0x00ec]
[ 0.375584] pnp 00:0b: [io 0x01ec-0x01ef]
[ 0.375586] pnp 00:0b: [io 0x0400-0x04fe]
[ 0.375589] pnp 00:0b: [io 0x0600]
[ 0.375591] pnp 00:0b: [io 0x0800-0x080f]
[ 0.375594] pnp 00:0b: [io 0x0c00-0x0cfe]
[ 0.375597] pnp 00:0b: [io 0x0f50-0x0f58]
[ 0.375600] pnp 00:0b: [mem 0xfec00000-0xffffffff]
[ 0.375667] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.376267] pnp 00:0c: [bus 02-03]
[ 0.376331] pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.376903] pnp 00:0d: [bus 04-05]
[ 0.376969] pnp 00:0d: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.378092] pnp 00:0e: [bus 06-07]
[ 0.378096] pnp 00:0e: [mem 0xfa000000-0xfbffffff window]
[ 0.378099] pnp 00:0e: [io 0x2500-0x257f window]
[ 0.378160] pnp 00:0e: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.379276] pnp 00:0f: [bus 08]
[ 0.379280] pnp 00:0f: [mem 0xf8000000-0xf9ffffff window]
[ 0.379283] pnp 00:0f: [io 0x2580-0xffff window]
[ 0.379343] pnp 00:0f: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.380328] pnp: PnP ACPI: found 16 devices
[ 0.380331] ACPI: ACPI bus type pnp unregistered
[ 0.380335] PnPBIOS: Disabled by ACPI PNP
[ 0.380350] system 00:01: [io 0x0510-0x0517] has been reserved
[ 0.380353] system 00:01: [io 0x0504-0x0507] has been reserved
[ 0.380357] system 00:01: [io 0x0500-0x0503] has been reserved
[ 0.380360] system 00:01: [io 0x0420-0x0427] has been reserved
[ 0.380364] system 00:01: [io 0x0460-0x0461] has been reserved
[ 0.380374] system 00:0b: [io 0x01ec-0x01ef] has been reserved
[ 0.380378] system 00:0b: [io 0x0400-0x04fe] could not be reserved
[ 0.380381] system 00:0b: [io 0x0600] has been reserved
[ 0.380384] system 00:0b: [io 0x0800-0x080f] has been reserved
[ 0.380388] system 00:0b: [io 0x0c00-0x0cfe] could not be reserved
[ 0.380391] system 00:0b: [io 0x0f50-0x0f58] has been reserved
[ 0.380396] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.417865] pci 0000:00:06.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[ 0.417874] pci 0000:08:07.0: BAR 6: assigned [mem 0x60100000-0x601fffff pref]
[ 0.417879] pci 0000:08:07.1: BAR 6: assigned [mem 0x60200000-0x602fffff pref]
[ 0.417884] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.417887] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.417891] pci_bus 0000:02: resource 0 [io 0x0000-0xffff]
[ 0.417894] pci_bus 0000:02: resource 1 [mem 0x00000000-0xffffffff]
[ 0.417897] pci_bus 0000:04: resource 0 [io 0x0000-0xffff]
[ 0.417900] pci_bus 0000:04: resource 1 [mem 0x00000000-0xffffffff]
[ 0.417904] pci_bus 0000:06: resource 0 [io 0x0000-0xffff]
[ 0.417907] pci_bus 0000:06: resource 1 [mem 0x00000000-0xffffffff]
[ 0.417910] pci_bus 0000:08: resource 0 [io 0x0000-0xffff]
[ 0.417913] pci_bus 0000:08: resource 1 [mem 0x00000000-0xffffffff]
[ 0.417956] NET: Registered protocol family 2
[ 0.418042] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.418375] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.419057] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.419474] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.419477] TCP reno registered
[ 0.419483] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.419499] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.419672] NET: Registered protocol family 1
[ 0.419705] pci 0000:00:06.0: Boot video device
[ 0.419710] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.432943] Unpacking initramfs...
[ 0.779777] Freeing initrd memory: 10096k freed
[ 0.788879] audit: initializing netlink socket (disabled)
[ 0.788907] type=2000 audit(1294830125.788:1): initialized
[ 0.796600] highmem bounce pool size: 64 pages
[ 0.796607] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.798845] VFS: Disk quotas dquot_6.5.2
[ 0.798925] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.799033] msgmni has been set to 1739
[ 0.799308] alg: No test for stdrng (krng)
[ 0.799418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.799424] io scheduler noop registered
[ 0.799427] io scheduler deadline registered
[ 0.799443] io scheduler cfq registered (default)
[ 0.799713] ERST: Table is not found!
[ 0.799738] isapnp: Scanning for PnP cards...
[ 1.153767] isapnp: No Plug & Play device found
[ 1.153980] Linux agpgart interface v0.103
[ 1.154217] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.174655] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.257347] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.277082] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x64,0x60 irq 1,12
[ 1.277086] PNP: PS/2 controller has invalid data port 0x64; using default 0x60
[ 1.277089] PNP: PS/2 controller has invalid command port 0x60; using default 0x64
[ 1.278774] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.278784] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.278926] mice: PS/2 mouse device common for all mice
[ 1.296781] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.296814] rtc0: alarms up to one year, 242 bytes nvram
[ 1.296834] cpuidle: using governor ladder
[ 1.296837] cpuidle: using governor menu
[ 1.297194] TCP cubic registered
[ 1.297359] NET: Registered protocol family 10
[ 1.297889] lo: Disabled Privacy Extensions
[ 1.298189] Mobile IPv6
[ 1.298193] NET: Registered protocol family 17
[ 1.298198] Registering the dns_resolver key type
[ 1.298228] Using IPI No-Shortcut mode
[ 1.298363] PM: Hibernation image not present or could not be loaded.
[ 1.298377] registered taskstats version 1
[ 1.298631] rtc_cmos 00:08: setting system clock to 2011-01-12 11:02:06 UTC (1294830126)
[ 1.298660] Initalizing network drop monitor service
[ 1.298819] Freeing unused kernel memory: 384k freed
[ 1.299121] Write protecting the kernel text: 2612k
[ 1.299158] Write protecting the kernel read-only data: 988k
[ 1.302242] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.322870] udev[58]: starting version 164
[ 1.400373] Floppy drive(s): fd0 is 1.44M
[ 1.413467] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.413473] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.413537] e1000 0000:06:08.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
[ 1.433531] FDC 0 is a National Semiconductor PC87306
[ 1.434461] SCSI subsystem initialized
[ 1.453015] usbcore: registered new interface driver usbfs
[ 1.453230] usbcore: registered new interface driver hub
[ 1.453302] usbcore: registered new device driver usb
[ 1.470615] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.495063] libata version 3.00 loaded.
[ 1.498678] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.498910] ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 11
[ 1.498929] ohci_hcd 0000:00:0f.2: PCI INT A -> Link[LPUS] -> GSI 11 (level, low) -> IRQ 11
[ 1.498955] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[ 1.498994] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
[ 1.704127] ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfebfe000
[ 1.708111] Fusion MPT base driver 3.04.17
[ 1.708115] Copyright (c) 1999-2008 LSI Corporation
[ 1.718618] Fusion MPT SPI Host driver 3.04.17
[ 1.718683] mptspi 0000:08:07.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 1.718856] mptbase: ioc0: Initiating bringup
[ 1.746210] e1000 0000:06:08.0: eth0: (PCI-X:100MHz:64-bit) 00:0d:60:eb:2b:08
[ 1.746223] e1000 0000:06:08.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.746263] e1000 0000:06:08.1: PCI INT B -> GSI 30 (level, low) -> IRQ 30
[ 1.762059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.762064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.762067] usb usb1: Product: OHCI Host Controller
[ 1.762070] usb usb1: Manufacturer: Linux 2.6.37-trunk-686 ohci_hcd
[ 1.762072] usb usb1: SerialNumber: 0000:00:0f.2
[ 1.762293] hub 1-0:1.0: USB hub found
[ 1.762305] hub 1-0:1.0: 4 ports detected
[ 1.763772] scsi0 : pata_serverworks
[ 1.764229] scsi1 : pata_serverworks
[ 1.764466] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x700 irq 14
[ 1.764472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x708 irq 15
[ 1.928395] ata1.00: ATAPI: LG CD-ROM CRN-8245B, 1.16, max UDMA/33
[ 1.944379] ata1.00: configured for UDMA/33
[ 1.946095] scsi 0:0:0:0: CD-ROM LG CD-ROM CRN-8245B 1.16 PQ: 0 ANSI: 5
[ 2.078166] e1000 0000:06:08.1: eth1: (PCI-X:100MHz:64-bit) 00:0d:60:eb:2b:09
[ 2.078173] e1000 0000:06:08.1: eth1: Intel(R) PRO/1000 Network Connection
[ 2.117216] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 2.117221] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.117452] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.124091] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.216013] ioc0: LSI53C1030 B2: Capabilities={Initiator}
[ 3.215935] scsi2 : ioc0: LSI53C1030 B2, FwRev=01000e00h, Ports=1, MaxQ=222, IRQ=27
[ 3.603707] mptspi 0000:08:07.1: PCI INT B -> GSI 28 (level, low) -> IRQ 28
[ 3.603840] mptbase: ioc1: Initiating bringup
[ 18.600040] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!, doorbell=0x24000000
[ 19.368017] mptbase: ioc0: Attempting Retry Config request type 0x4, page 0x1, action 2
[ 19.368070] mptbase: ioc0: Retry completed ret=0x0 timeleft=3750
[ 19.368844] scsi 2:0:0:0: Direct-Access IBM-ESXS DTN073C3UCDY10FN S27Y PQ: 0 ANSI: 3
[ 19.368857] scsi target2:0:0: Beginning Domain Validation
[ 19.378852] scsi target2:0:0: Ending Domain Validation
[ 19.378909] scsi target2:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 19.381122] scsi 2:0:1:0: Direct-Access FUJITSU MAP3735NC 5605 PQ: 0 ANSI: 3
[ 19.381131] scsi target2:0:1: Beginning Domain Validation
[ 19.394378] scsi target2:0:1: Ending Domain Validation
[ 19.394439] scsi target2:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 19.395500] scsi 2:0:2:0: Direct-Access IBM-ESXS DTN073C3UCDY10FN S27Y PQ: 0 ANSI: 3
[ 19.395508] scsi target2:0:2: Beginning Domain Validation
[ 19.405182] scsi target2:0:2: Ending Domain Validation
[ 19.405238] scsi target2:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 20.406233] scsi 2:0:8:0: Processor IBM 32P0032a S320 1 1 PQ: 0 ANSI: 2
[ 20.406246] scsi target2:0:8: Beginning Domain Validation
[ 20.406981] scsi target2:0:8: Ending Domain Validation
[ 20.407035] scsi target2:0:8: asynchronous
[ 22.159020] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 22.159399] scsi 2:0:1:0: Attached scsi generic sg2 type 0
[ 22.159780] scsi 2:0:2:0: Attached scsi generic sg3 type 0
[ 22.160156] scsi 2:0:8:0: Attached scsi generic sg4 type 3
[ 33.600014] mptbase: ioc1: ERROR - Wait IOC_READY state (0x20000000) timeout(15)!
[ 38.136011] ioc1: LSI53C1030 B2: Capabilities={Initiator}
[ 38.616010] ioc0: LSI53C1030 B2: Capabilities={Initiator}
[ 40.087909] scsi3 : ioc1: LSI53C1030 B2, FwRev=01000e00h, Ports=1, MaxQ=222, IRQ=28
[ 70.880060] mptscsih: ioc0: attempting task abort! (sc=f7094f00)
[ 70.880068] sd 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
[ 71.000014] mptscsih: ioc0: task abort: FAILED (sc=f7094f00)
[ 71.000017] mptscsih: ioc0: attempting task abort! (sc=f5bc6f00)
[ 71.000020] sd 2:0:2:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[ 71.120012] mptscsih: ioc0: task abort: FAILED (sc=f5bc6f00)
[ 71.120015] mptscsih: ioc0: attempting task abort! (sc=f5bd2300)
[ 71.120018] sd 2:0:1:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
[ 71.240014] mptscsih: ioc0: task abort: FAILED (sc=f5bd2300)
[ 71.240022] mptscsih: ioc0: attempting target reset! (sc=f7094f00)
[ 71.240025] sd 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
[ 81.360024] mptscsih: ioc0: WARNING - Issuing Reset from mptscsih_IssueTaskMgmt!! doorbell=0x24000000
[ 82.392014] mptscsih: ioc0: target reset: SUCCESS (sc=f7094f00)
[ 82.392736] mptscsih: ioc0: attempting target reset! (sc=f5bd2300)
[ 82.392740] sd 2:0:1:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
[ 82.512013] mptscsih: ioc0: target reset: SUCCESS (sc=f5bd2300)
[ 82.559878] mptscsih: ioc0: attempting target reset! (sc=f5bc6f00)
[ 82.559881] sd 2:0:2:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[ 82.676011] mptscsih: ioc0: target reset: SUCCESS (sc=f5bc6f00)
[ 82.869570] sd 2:0:1:0: [sdb] 143374650 512-byte logical blocks: (73.4 GB/68.3 GiB)
[ 82.869606] sd 2:0:0:0: [sda] 143374000 512-byte logical blocks: (73.4 GB/68.3 GiB)
[ 82.869963] sd 2:0:2:0: [sdc] 143374000 512-byte logical blocks: (73.4 GB/68.3 GiB)
[ 82.870514] sd 2:0:0:0: [sda] Write Protect is off
[ 82.870518] sd 2:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 82.870808] sd 2:0:2:0: [sdc] Write Protect is off
[ 82.870812] sd 2:0:2:0: [sdc] Mode Sense: cb 00 00 08
[ 82.871600] sd 2:0:1:0: [sdb] Write Protect is off
[ 82.871604] sd 2:0:1:0: [sdb] Mode Sense: b3 00 00 08
[ 82.871648] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 82.871897] sd 2:0:2:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 82.872973] sd 2:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 82.884347] sdb: sdb1 sdb2
[ 82.885453] sdc: sdc1 sdc2
[ 82.887484] sd 2:0:2:0: [sdc] Attached SCSI disk
[ 82.889990] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 83.004033] scsi target2:0:0: Beginning Domain Validation
[ 83.024835] scsi target2:0:0: Ending Domain Validation
[ 83.024902] scsi target2:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 83.035125] sda: sda1 sda2
[ 83.037050] sd 2:0:0:0: [sda] Attached SCSI disk
[ 83.228050] scsi target2:0:1: Beginning Domain Validation
[ 83.238470] scsi target2:0:1: Ending Domain Validation
[ 83.238546] scsi target2:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 83.238606] scsi target2:0:2: Beginning Domain Validation
[ 83.245171] scsi target2:0:2: Ending Domain Validation
[ 83.245232] scsi target2:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 83.245293] scsi target2:0:8: Beginning Domain Validation
[ 83.245838] scsi target2:0:8: Ending Domain Validation
[ 83.245899] scsi target2:0:8: asynchronous
[ 93.404051] md: raid1 personality registered for level 1
[ 93.463270] md: md0 stopped.
[ 93.465633] md: bind<sdc1>
[ 93.465859] md: bind<sda1>
[ 93.467734] bio: create slab <bio-1> at 1
[ 93.467844] md/raid1:md0: active with 2 out of 2 mirrors
[ 93.467876] md0: detected capacity change from 0 to 314441728
[ 93.469945] md0: detected capacity change from 0 to 314441728
[ 93.475130] md0: unknown partition table
[ 93.483546] md: md1 stopped.
[ 93.484791] md: bind<sdc2>
[ 93.485001] md: bind<sda2>
[ 93.487648] md/raid1:md1: active with 2 out of 2 mirrors
[ 93.487695] md1: detected capacity change from 0 to 73090744320
[ 93.500778] md1: unknown partition table
[ 93.717287] device-mapper: uevent: version 1.0.3
[ 93.717774] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 93.992820] PM: Starting manual resume from disk
[ 93.992825] PM: Hibernation image partition 253:1 present
[ 93.992828] PM: Looking for hibernation image.
[ 93.996254] PM: Image not found (code -22)
[ 93.996257] PM: Hibernation image not present or could not be loaded.
[ 94.027061] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 94.028529] SGI XFS Quota Management subsystem
[ 94.043084] XFS mounting filesystem dm-0
[ 94.252210] Ending clean XFS mount for filesystem: dm-0
[ 94.796264] udev[332]: starting version 164
[ 94.901166] udev[355]: renamed network interface eth1 to enet2
[ 94.909171] udev[356]: renamed network interface eth0 to enet1
[ 94.955493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 94.955505] ACPI: Power Button [PWRF]
[ 94.968126] ACPI: acpi_idle registered with cpuidle
[ 95.147870] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 95.210945] piix4_smbus 0000:00:0f.0: SMBus Host Controller at 0x440, revision 0
[ 95.348226] Error: Driver 'pcspkr' is already registered, aborting...
[ 95.691034] loop: module loaded
[ 96.501554] Adding 1572860k swap on /dev/mapper/grid-swap. Priority:-1 extents:1 across:1572860k
[ 96.729216] XFS mounting filesystem dm-5
[ 96.861237] Ending clean XFS mount for filesystem: dm-5
[ 96.888946] XFS mounting filesystem dm-3
[ 97.068216] Ending clean XFS mount for filesystem: dm-3
[ 97.088199] XFS mounting filesystem dm-2
[ 97.225119] Ending clean XFS mount for filesystem: dm-2
[ 97.258814] XFS mounting filesystem dm-4
[ 97.401929] Ending clean XFS mount for filesystem: dm-4
[ 97.879493] bonding: Ethernet Channel Bonding Driver: v3.7.0 (June 2, 2010)
[ 97.879502] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[ 97.882853] bonding: bond0: setting mode to active-backup (1).
[ 97.882918] bonding: bond0: Setting MII monitoring interval to 100.
[ 97.882967] bonding: bond0: Setting up delay to 4000.
[ 97.911824] bonding: bond0: doing slave updates when interface is down.
[ 97.911831] bonding: bond0: Adding slave enet1.
[ 97.911834] bonding: bond0: master_dev is not up in bond_enslave
[ 97.912669] bonding: bond0: enslaving enet1 as a backup interface with a down link.
[ 97.916387] e1000: enet1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 97.916909] bonding: bond0: doing slave updates when interface is down.
[ 97.916916] bonding: bond0: Adding slave enet2.
[ 97.916919] bonding: bond0: master_dev is not up in bond_enslave
[ 97.917675] bonding: bond0: enslaving enet2 as a backup interface with a down link.
[ 97.920416] e1000: enet2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 97.920920] bonding: bond0: Setting enet1 as primary slave.
[ 97.924157] bonding: bond0: link status up for interface enet1, enabling it in 0 ms.
[ 97.924165] bonding: bond0: link status up for interface enet2, enabling it in 4000 ms.
[ 97.924387] ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 97.924397] bonding: bond0: link status definitely up for interface enet1, 100 Mbps full duplex.
[ 97.924402] bonding: bond0: making interface enet1 the new active one.
[ 97.924523] bonding: bond0: first active interface up!
[ 97.924942] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 99.464164] sshd (1290): /proc/1290/oom_adj is deprecated, please use /proc/1290/oom_score_adj instead.
[ 101.928113] bonding: bond0: link status definitely up for interface enet2, 100 Mbps full duplex.
[ 108.336009] bond0: no IPv6 routers present
Reply to: