[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#653331: CPU#0 stuck for 23s, system does not boot



--- On Thu, 29/12/11, Jonathan Nieder <jrnieder@gmail.com> wrote:

> From: Jonathan Nieder <jrnieder@gmail.com>
> Subject: Re: CPU#0 stuck for 23s, system does not boot
> To: "P." <mailme667@yahoo.co.uk>
> Cc: 653331@bugs.debian.org, 646429-submitter@bugs.debian.org
> Date: Thursday, 29 December, 2011, 5:50
> severity 646429 important
> merge 646429 653331
> quit
> 
> P. wrote:
> 
> > A friend (thanks FrodoBaggins!) suggested Bug#646429
> > (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=646429)
> may be the
> > same problem.
> [...]
> > Indeed: stars. After entering "echo +300 >
> > /sys/class/rtc/rtc0/wakealarm" a proper value is
> shown, but is
> > instantly forgotten on reboot or powerdown. A couple
> of
> > kernel-reloadings using kexec appear to show that
> updating the
> > wakealarm makes the difference between kernel 3.1
> booting or not.
> 
> Thanks; merging.
> 
> > I haven't tried his patch, for two reasons: #1 I'm not
> very
> > experienced with kernel compilation. #2 It would take
> approximately
> > two eternities on the laptop in question.
> 
> There have been some rtc changes upstream:
> 
>  - v3.2-rc5~43^2~4 (rtc: Disable the alarm in the
> hardware,
>    2011-11-22), cherry-picked as v3.1.5~23
> 
>  - v3.2-rc7~23^2~2 (rtc: Expire alarms after the time is
> set,
>    2011-12-09)
> 
> but neither seems relevant.
> 
> My advice:
> 
>  - Please test version 3.1.5 or newer from sid, testing,
> or
>    experimental.
>  - If that reproduces the problem, please also try 3.2-rc7
> or newer
>    from experimental.

Thanks. I have tested 3.2-rc7 from experimental. Here's the log, not very exciting, it looks the same to me:

  Booting 'Debian GNU/Linux, with Linux 3.2.0-rc7-686-pae'

Loading Linux 3.2.0-rc7-686-pae ...
Loading initial ramdisk ...
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-rc7-686-pae (Debian 3.2~rc7-1~experimental.1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Wed Dec 28 21:26:25 UTC 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000177fb000 (usable)
[    0.000000]  BIOS-e820: 00000000177fb000 - 00000000177ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000177ff000 - 0000000017800000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] DMI 2.3 present.
[    0.000000] last_pfn = 0x177fb max_arch_pfn = 0x1000000
[    0.000000] PAT not supported by CPU.
[    0.000000] init_memory_mapping: 0000000000000000-00000000177fb000
[    0.000000] RAMDISK: 16b39000 - 17470000
[    0.000000] ACPI: RSDP 000f5a90 00014 (v00 ASUS  )
[    0.000000] ACPI: RSDT 177fb000 0002C (v01 ASUS   A1F      30303031 MSFT 31313031)
[    0.000000] ACPI: FACP 177fb080 00074 (v01 ASUS   A1F      30303031 MSFT 31313031)
[    0.000000] ACPI: DSDT 177fb100 03BF5 (v01   ASUS A1F      00001000 INTL 02002015)
[    0.000000] ACPI: FACS 177ff000 00040
[    0.000000] ACPI: BOOT 177fb040 00028 (v01 ASUS   A1F      30303031 MSFT 31313031)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 375MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 177fb000
[    0.000000]   low ram: 0 - 177fb000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000177fb
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000177fb
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0xe408
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 17800000 (gap: 17800000:e87f0000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @d6800000 s33024 r0 d24320 u2097152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 95386
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-rc7-686-pae root=UUID=c5c9cd4c-f7c7-46ff-ae62-bb6ca3c974ab ro console=tty0 console=ttyS0,115200n8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 366428k/385004k available (2810k kernel code, 18124k reserved, 1362k data, 408k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xd7ffb000 - 0xff9fe000   ( 634 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd77fb000   ( 375 MB)
[    0.000000]       .init : 0xc1414000 - 0xc147a000   ( 408 kB)
[    0.000000]       .data : 0xc12be86c - 0xc1413400   (1362 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12be86c   (2810 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 851.774 MHz processor.
[    0.012006] Calibrating delay loop (skipped), value calculated using timer frequency.. 1703.54 BogoMIPS (lpj=3407096)
[    0.020010] pid_max: default: 32768 minimum: 301
[    0.024153] Security Framework initialized
[    0.028031] AppArmor: AppArmor disabled by boot time parameter
[    0.032056] Mount-cache hash table entries: 512
[    0.036463] Initializing cgroup subsys cpuacct
[    0.040026] Initializing cgroup subsys memory
[    0.044033] Initializing cgroup subsys devices
[    0.048012] Initializing cgroup subsys freezer
[    0.052012] Initializing cgroup subsys net_cls
[    0.056012] Initializing cgroup subsys blkio
[    0.060130] mce: CPU supports 5 MCE banks
[    0.064103] SMP alternatives: switching to UP code
[    0.077274] Freeing SMP alternatives: 8k freed
[    0.080025] ACPI: Core revision 20110623
[    0.091981] ACPI: setting ELCR to 0200 (from 0020)
[    0.096291] weird, boot CPU (#0) not listed by the BIOS.
[    0.100013] SMP motherboard not detected.
[    0.104014] Local APIC not detected. Using dummy APIC emulation.
[    0.108011] SMP disabled
[    0.112014] Performance Events:
[    0.116018] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.120012] no hardware sampling interrupt available.
[    0.124016] p6 PMU driver.
[    0.126765] ... version:                0
[    0.128014] ... bit width:              32
[    0.132014] ... generic registers:      2
[    0.136014] ... value mask:             00000000ffffffff
[    0.140014] ... max period:             000000007fffffff
[    0.144014] ... fixed-purpose events:   0
[    0.148015] ... event mask:             0000000000000003
[    0.152982] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[    0.156249] Brought up 1 CPUs
[    0.160029] Total of 1 processors activated (1703.54 BogoMIPS).
[    0.164901] devtmpfs: initialized
[    0.168703] PM: Registering ACPI NVS region at 177ff000 (4096 bytes)
[    0.172810] print_constraints: dummy:
[    0.176254] NET: Registered protocol family 16
[    0.180396] ACPI: bus type pci registered
[    0.188192] PCI: PCI BIOS revision 2.10 entry at 0xf0ae0, last bus=1
[    0.192018] PCI: Using configuration type 1 for base access
[    0.198189] bio: create slab <bio-0> at 0
[    0.200337] ACPI: Added _OSI(Module Device)
[    0.204033] ACPI: Added _OSI(Processor Device)
[    0.208022] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.212022] ACPI: Added _OSI(Processor Aggregator Device)
[    0.234629] ACPI: Interpreter enabled
[    0.236047] ACPI: (supports S0 S1 S4 S5)
[    0.241294] ACPI: Using PIC for interrupt routing
[    0.257576] ACPI: Power Resource [FN0] (off)
[    0.260820] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[    0.264399] ACPI: No dock devices found.
[    0.268026] HEST: Table not found.
[    0.272037] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.276439] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.281850] pci 0000:00:0a.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[    0.284031] pci 0000:00:0a.0: MMC cards are now supported by standard SDHCI controller
[    0.288465] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.292486]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.303367] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 11) *0, disabled.
[    0.311396] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 11)
[    0.314369] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 11)
[    0.321411] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 11)
[    0.328543] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.332033] vgaarb: loaded
[    0.334772] vgaarb: bridge control possible 0000:01:00.0
[    0.336157] PCI: Using ACPI for IRQ routing
[    0.340655] Switching to clocksource pit
[    0.352051] pnp: PnP ACPI init
[    0.355397] ACPI: bus type pnp registered
[    0.360295] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.363362] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.366383] system 00:00: [mem 0x00100000-0x177fffff] could not be reserved
[    0.373400] system 00:00: [mem 0xffee0000-0xffefffff] has been reserved
[    0.376073] system 00:00: [mem 0xfff80000-0xffffffff] could not be reserved
[    0.379091] system 00:00: [mem 0x000d0000-0x000dbfff] has been reserved
[    0.387088] system 00:02: [io  0xe400-0xe47f] has been reserved
[    0.393087] system 00:02: [io  0xe480-0xe4ff] has been reserved
[    0.395062] system 00:02: [io  0x0600-0x061f] has been reserved
[    0.401041] system 00:02: [io  0x0480-0x048f] has been reserved
[    0.403021] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.412933] pnp: PnP ACPI: found 13 devices
[    0.417210] ACPI: ACPI bus type pnp unregistered
[    0.421890] PnPBIOS: Disabled by ACPI PNP
[    0.467725] Switching to clocksource acpi_pm
[    0.472287] pci 0 assigned [mem 0x18000000-0x18000fff]
[    0.479176] pci 0000:00:0a.0: BAR 0: set to [mem 0x18000000-0x18000fff] (PCI address [0x18000000-0x18000fff])
[    0.489157] pci 0000:00:0a.1: BAR 0: assigned [mem 0x1c000000-0x1c000fff]
[    0.496006] pci 0000:00:0a.1: BAR 0: set to [mem 0x1c000000-0x1c000fff] (PCI address [0x1c000000-0x1c000fff])
[    0.505975] pci 0000:00:01.1: BAR 6: assigned [mem 0x18020000-0x1803ffff pref]
[    0.513262] pci 0000:00:0a.1: BAR 16: assigned [mem 0x20000000-0x23ffffff]
[    0.520200] pci 0000:00:0a.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
[    0.527573] pci 0000:00:0a.1: BAR 14: assigned [io  0x1000-0x10ff]
[    0.533811] pci 0000:00:0a.1: BAR 13: assigned [io  0x1400-0x14ff]
[    0.540051] pci 0000:00:0a.0: BAR 16: assigned [mem 0x28000000-0x2bffffff]
[    0.546982] pci 0000:00:0a.0: BAR 15: assigned [mem 0x2c000000-0x2fffffff pref]
[    0.554353] pci 0000:00:0a.0: BAR 14: assigned [io  0x1800-0x18ff]
[    0.560596] pci 0000:00:0a.0: BAR 13: assigned [io  0x1c00-0x1cff]
[    0.566835] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.572117] pci 0000:00:02.0:   bridge window [io  0xa000-0xafff]
[    0.578269] pci 0000:00:02.0:   bridge window [mem 0xd1800000-0xd1ffffff]
[    0.585116] pci 0000:00:02.0:   bridge window [mem 0xd8000000-0xe7efffff pref]
[    0.592618] pci 0000:00:0a.0: CardBus bridge to [bus 02-05]
[    0.598248] pci 0000:00:0a.0:   bridge window [io  0x1c00-0x1cff]
[    0.604395] pci 0000:00:0a.0:   bridge window [io  0x1800-0x18ff]
[    0.610549] pci 0000:00:0a.0:   bridge window [mem 0x2c000000-0x2fffffff pref]
[    0.617832] pci 0000:00:0a.0:   bridge window [mem 0x28000000-0x2bffffff]
[    0.624672] pci 0000:00:0a.1: CardBus bridge to [bus 06-09]
[    0.630299] pci 0000:00:0a.1:   bridge window [io  0x1400-0x14ff]
[    0.636448] pci 0000:00:0a.1:   bridge window [io  0x1000-0x10ff]
[    0.642598] pci 0000:00:0a.1:   bridge window [mem 0x24000000-0x27ffffff pref]
[    0.649874] pci 0000:00:0a.1:   bridge window [mem 0x20000000-0x23ffffff]
[    0.657845] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    0.663678] pci 0000:00:0a.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    0.672273] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[    0.677999] pci 0000:00:0a.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[    0.686167] NET: Registered protocol family 2
[    0.690853] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.698672] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.706548] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.713954] TCP: Hash tables configured (established 16384 bind 16384)
[    0.720697] TCP reno registered
[    0.723918] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.729890] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.736783] NET: Registered protocol family 1
[    0.741835] Unpacking initramfs...
[    1.731538] Freeing initrd memory: 9436k freed
[    1.811037] Simple Boot Flag at 0x3a set to 0x1
[    1.817466] audit: initializing netlink socket (disabled)
[    1.824243] type=2000 audit(1325287936.820:1): initialized
[    1.879483] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.886428] VFS: Disk quotas dquot_6.5.2
[    1.890537] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.897380] msgmni has been set to 734
[    1.901825] alg: No test for stdrng (krng)
[    1.906160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.913641] io scheduler noop registered
[    1.917623] io scheduler deadline registered
[    1.921998] io scheduler cfq registered (default)
[    1.927551] ERST: Table is not found!
[    1.931283] GHES: HEST is not enabled!
[    1.935135] isapnp: Scanning for PnP cards...
[    2.293028] isapnp: No Plug & Play device found
[    2.297900] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.324626] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.352004] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.358802] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[    2.364583] serial 0000:00:01.6: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[    2.372683] serial 0000:00:01.6: PCI INT C disabled
[    2.378113] Linux agpgart interface v0.103
[    2.382617] agpgart-sis 0000:00:00.0: SiS chipset [1039/0630]
[    2.394986] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd4000000
[    2.402089] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.414457] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.419500] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.425029] mousedev: PS/2 mouse device common for all mice
[    2.430930] rtc_cmos 00:04: RTC can wake from S4
[   28.164020] BUG: soft lockup - CPU#0 stuck for 23s! [swapper/0:1]
[   28.168010] Modules linked in:
[   28.168010] Modules linked in:
[   28.168010]
[   28.168010] Pid: 1, comm: swapper/0 Not tainted 3.2.0-rc7-686-pae #1 ASUSTek Computer Inc. A1F     /A1F
[   28.168010] EIP: 0060:[<c11fe460>] EFLAGS: 00000256 CPU: 0
[   28.168010] EIP is at is_leap_year+0x10/0x2d
[   28.168010] EAX: 003054f3 EBX: 00000064 ECX: 12e12ef8 EDX: 0000000c
[   28.168010] ESI: 0000001c EDI: 0000001e EBP: d49bf800 ESP: d644fe3c
[   28.168010]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   28.168010] Process swapper/0 (pid: 1, ti=d6406000 task=d644d900 task.ti=d644e000)
[   28.168010] Stack:
[   28.168010]  00000001 c11fe48f ffffffea d644fedc c11fe5e0 d644fed8 00000000 00000003
[   28.168010]  c11ff603 d644fe90 d644fedc d49bf978 00000012 00000020 00000017 0000001e
[   28.168010]  0000000b 0000006f 00000000 00000000 00000000 00000012 00000020 00000017
[   28.168010] Call Trace:
[   28.168010]  [<c11fe48f>] ? rtc_month_days+0x12/0x24
[   28.168010]  [<c11fe5e0>] ? rtc_valid_tm+0x2c/0x4c
[   28.168010]  [<c11ff603>] ? __rtc_read_alarm+0x1d5/0x1f6
[   28.168010]  [<c11fe867>] ? rtc_device_register+0x156/0x21c
[   28.168010]  [<c12b728b>] ? cmos_do_probe+0x107/0x2f7
[   28.168010]  [<c11b3a75>] ? pnp_device_probe+0x60/0x80
[   28.168010]  [<c11ebf6b>] ? driver_probe_device+0x8c/0x10c
[   28.168010]  [<c11ec02b>] ? __driver_attach+0x40/0x5b
[   28.168010]  [<c11eb51b>] ? bus_for_each_dev+0x37/0x60
[   28.168010]  [<c11ebd0f>] ? driver_attach+0x14/0x17
[   28.168010]  [<c11ebfeb>] ? driver_probe_device+0x10c/0x10c
[   28.168010]  [<c11eba40>] ? bus_add_driver+0x83/0x1ac
[   28.168010]  [<c115c3bc>] ? kset_find_obj_hinted+0x45/0x78
[   28.168010]  [<c143eb49>] ? rtc_sysfs_init+0x8/0x8
[   28.168010]  [<c11ec39a>] ? driver_register+0x73/0xc6
[   28.168010]  [<c143eb49>] ? rtc_sysfs_init+0x8/0x8
[   28.168010]  [<c143eb49>] ? rtc_sysfs_init+0x8/0x8
[   28.168010]  [<c143eb54>] ? cmos_init+0xb/0x5a
[   28.168010]  [<c1003074>] ? do_one_initcall+0x66/0x10e
[   28.168010]  [<c14147b6>] ? kernel_init+0xa9/0x11b
[   28.168010]  [<c141470d>] ? start_kernel+0x32f/0x32f
[   28.168010]  [<c12bddbe>] ? kernel_thread_helper+0x6/0x10
[   28.168010] Code: 00 ff 74 24 08 e8 b6 c6 ff ff 83 c4 0c eb 07 89 f0 e8 60 f5 fb ff 58 5b 5e 5f c3 a8 03 89 c1 53 75 12 31 d2 bb 64 00 00 00 f7 f3 <b8> 01 00 00 00 85 d2 75 12 31 d2 bb 90 01 00 00 89 c8 f7 f3 31
[   28.168010] Call Trace:
[   28.168010]  [<c11fe48f>] ? rtc_month_days+0x12/0x24
[   28.168010]  [<c11fe5e0>] ? rtc_valid_tm+0x2c/0x4c
[   28.168010]  [<c11ff603>] ? __rtc_read_alarm+0x1d5/0x1f6
[   28.168010]  [<c11fe867>] ? rtc_device_register+0x156/0x21c
[   28.168010]  [<c12b728b>] ? cmos_do_probe+0x107/0x2f7
[   28.168010]  [<c11b3a75>] ? pnp_device_probe+0x60/0x80
[   28.168010]  [<c11ebf6b>] ? driver_probe_device+0x8c/0x10c
[   28.168010]  [<c11ec02b>] ? __driver_attach+0x40/0x5b
[   28.168010]  [<c11eb51b>] ? bus_for_each_dev+0x37/0x60
[   28.168010]  [<c11ebd0f>] ? driver_attach+0x14/0x17
[   28.168010]  [<c11ebfeb>] ? driver_probe_device+0x10c/0x10c
[   28.168010]  [<c11eba40>] ? bus_add_driver+0x83/0x1ac
[   28.168010]  [<c115c3bc>] ? kset_find_obj_hinted+0x45/0x78
[   28.168010]  [<c143eb49>] ? rtc_sysfs_init+0x8/0x8
[   28.168010]  [<c11ec39a>] ? driver_register+0x73/0xc6
[   28.168010]  [<c143eb49>] ? rtc_sysfs_init+0x8/0x8
[   28.168010]  [<c143eb49>] ? rtc_sysfs_init+
                                              [   28.168010]  [<c143eb54>] ? cmos_init+0xb/0x5a
[   28.168010]  [<c1003074>] ? do_one_initcall+0x66/0x10e
[   28.168010]  [<c14147b6>] ? kernel_init+0xa9/0x11b
[   28.168010]  [<c141470d>] ? start_kernel+0x32f/0x32f
[   28.168010]  [<c12bddbe>] ? kernel_thread_helper+0x6/0x10
[   56.164020] BUG: soft lockup - CPU#0 stuck for 23s! [swapper/0:1]
[   56.168010] Modules linked in:
[   56.168010] Modules linked in:
[   56.168010]
[   56.168010] Pid: 1, comm: swapper/0 Not tainted 3.2.0-rc7-686-pae #1 ASUSTek Computer Inc. A1F     /A1F
[   56.168010] EIP: 0060:[<c11fe48a>] EFLAGS: 00000212 CPU: 0
[   56.168010] EIP is at rtc_month_days+0xd/0x24
[   56.168010] EAX: 272dc3a4 EBX: 00000001 ECX: 272dc3a3 EDX: 272dc3a4
[   56.168010] ESI: 0000001c EDI: 0000001e EBP: d49bf800 ESP: d644fe44
[   56.168010]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   56.168010] Process swapper/0 (pid: 1, ti=d6406000 task=d644d900 task.ti=d644e000)
[   56.168010] Stack:
[   56.168010]  ffffffea d644fedc c11fe5e0 d644fed8 00000000 00000003 c11ff603 d644fe90
[   56.168010]  d644fedc d49bf978 00000012 00000020 00000017 0000001e 0000000b 0000006f
[   56.168010]  00000000 00000000 00000000 00000012 00000020 00000017 0000001e 0000000b
[   56.168010] Call Trace:
[   56.168010]  [<c11fe5e0>] ? rtc_valid_tm+0x2c/0x4c
[   56.168010]  [<c11ff603>] ? __rtc_read_alarm+0x1d5/0x1f6
[   56.168010]  [<c11fe867>] ? rtc_device_register+0x156/0x21c
[   56.168010]  [<c12b728b>] ? cmos_do_probe+0x107/0x2f7
[   56.168010]  [<c11b3a75>] ? pnp_device_probe+0x60/0x80
[   56.168010]  [<c11ebf6b>] ? driver_probe_device+0x8c/0x10c
[   56.168010]  [<c11ec02b>] ? __driver_attach+0x40/0x5b
[   56.168010]  [<c11eb51b>] ? bus_for_each_dev+0x37/0x60
[   56.168010]  [<c11ebd0f>] ? driver_attach+0x14/0x17
[   56.168010]  [<c11ebfeb>] ? driver_probe_device+0x10c/0x10c
[   56.168010]  [<c11eba40>] ? bus_add_driver+0x83/0x1ac
[   56.168010]  [<c115c3bc>] ? kset_find_obj_hinted+0x45/0x78
[   56.168010]  [<c143eb49>] ? rtc_sysfs_init+0x8/0x8
[   56.168010]  [<c11ec39a>] ? driver_register+0x73/0xc6
[   56.168010]  [<c143eb49>] ? rtc_sysfs_init+0x8/0x8
[   56.168010]  [<c143eb49>] ? rtc_sysfs_init+0x8/0x8
[   56.168010]  [<c143eb54>] ? cmos_init+0xb/0x5a
[   56.168010]  [<c1003074>] ? do_one_initcall+0x66/0x10e
[   56.168010]  [<c14147b6>] ? kernel_init+0xa9/0x11b
[   56.168010]  [<c141470d>] ? start_kernel+0x32f/0x32f
[   56.168010]  [<c12bddbe>] ? kernel_thread_helper+0x6/0x10
[   56.168010] Code: f3 b8 01 00 00 00 85 d2 75 12 31 d2 bb 90 01 00 00 89 c8 f7 f3 31 c0 85 d2 0f 94 c0 5b c3 56 53 89 c3 89 d0 0f b6 b3 b4 c5 2e c1 <e8> c1 ff ff ff 31 d2 84 c0 74 06 31 d2 4b 0f 94 c2 8d 04 16 5b
[   56.168010] Call Trace:
[   56.168010]  [<c11fe5e0>] ? rtc_valid_tm+0x2c/0x4c
[   56.168010]  [<c11ff603>] ? __rtc_read_alarm+0x1d5/0x1f6
[   56.168010]  [<c11fe867>] ? rtc_device_register+0x156/0x21c
[   56.168010]  [<c12b728b>] ? cmos_do_probe+0x107/0x2f7
[   56.168010]  [<c11b3a75>] ? pnp_device_probe+0x60/0x80
[   56.168010]  [<c11ebf6b>] ? driver_probe_device+0x8c/0x10c
[   56.168010]  [<c11ec02b>] ? __driver_attach+0x40/0x5b
[   56.168010]  [<c11eb51b>] ? bus_for_each_dev+0x37/0x60
[   56.168010]  [<c11ebd0f>] ? driver_attach+0x14/0x17
[   56.168010]  [<c11ebfeb>] ? driver_probe_device+0x10c/0x10c
[   56.168010]  [<c11eba40>] ? bus_add_driver+0x83/0x1ac
[   56.168010]  [<c115c3bc>] ? kset_find_obj_hinted+0x45/0x78
[   56.168010]  [<c143eb49>] ? rtc_sysfs_init+0x8/0x8
[   56.168010]  [<c11ec39a>] ? driver_register+0x73/0xc6
[   56.168010]  [<c143eb49>] ? rtc_sysfs_init+0x8/0x8
[   56.168010]  [<c143eb49>] ? rtc_sysfs_init+0x8/0x8
[   56.168010]  [<c143eb54>] ? cmos_init+0xb/0x5a
[   56.168010]  [<c1003074>] ? do_one_initcall+0x68010]  [<c14147b6>] ? kernel_init+0xa9/0x11b
[   56.168010]  [<c141470d>] ? start_kernel+0x32f/0x32f
[   56.168010]  [<c12bddbe>] ? kernel_thread_helper+0x6/0x10

P. van Gaans



Reply to: