Your message dated Sun, 11 Dec 2011 16:40:19 +0000 with message-id <1323621619.25752.25.camel@deadeye> and subject line Re: Bug#651714: linux-image-3.1.0-1-amd64: b43 driver not working because of bcma_pci_bridge_tbl missing entries has caused the Debian Bug report #651714, regarding linux-image-3.1.0-1-amd64: b43 driver not working because of bcma_pci_bridge_tbl missing entries to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 651714: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=651714 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.1.0-1-amd64: b43 driver not working because of bcma_pci_bridge_tbl missing entries
- From: Adrian Gibanel Lopez <adrian15sgd@gmail.com>
- Date: Sun, 11 Dec 2011 17:23:16 +0100
- Message-id: <[🔎] 20111211162316.4594.13341.reportbug@adrianworktop>
Package: linux-2.6 Version: 3.1.4-1 Severity: normal Dear Maintainer, * What led up to the situation? Nothing actually. I just wanted to try b43 driver which it is known to work with BCM43224 at Linux Kernel 3.1. I just make an apt-get dist-upgrade on my unstable Debian. However I had never tried to use b43 driver before. * What exactly did you do (or not do) that was effective (or ineffective)? I try to load b43 and bcma driver to have wireless connection in this card: 03:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) I try to run this: root@adrianworktop:~# modprobe -r brcmsmac root@adrianworktop:~# modprobe -r b43 mroot@adrianworktop:~# modprobe -r bcma root@adrianworktop:~# modprobe b43 root@adrianworktop:~# dmesg | grep b43 * What was the outcome of this action? No response at all. * What outcome did you expect instead? I should something about b43 driver begin loaded I suppose. And being able to use my wireless device. Other system information: After running this command: root@adrianworktop:~# modinfo bcma filename: /lib/modules/3.1.0-1-amd64/kernel/drivers/bcma/bcma.ko license: GPL description: Broadcom's specific AMBA driver alias: pci:v000014E4d00004331sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.1.0-1-amd64 SMP mod_unload modversions According to Zajec from bcm-users channel (freenode server): someone just modified driver/bcma/host_pci.c and removed some entries from bcma_pci_bridge_tbl . So it would be nice if you could rescue these removed entries and put them where they originally were. -- Package-specific info: ** Version: Linux version 3.1.0-1-amd64 (Debian 3.1.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-5) ) #1 SMP Tue Nov 29 13:47:12 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=da1c4c3b-bf84-483c-9619-2817c588b3e2 ro resume=/dev/sda7 pcie_aspm=force ** Tainted: PCO (5121) * Proprietary module has been loaded. * Module from drivers/staging has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 8.549004] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 8.549205] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 8.560978] ACPI: AC Adapter [ADP1] (on-line) [ 8.624498] cfg80211: Calling CRDA to update world regulatory domain [ 8.670018] ACPI: Battery Slot [BAT0] (battery present) [ 8.744702] brcmutil: module is from the staging directory, the quality is unknown, you have been warned. [ 8.947131] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.947317] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 8.947354] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 9.056785] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.056904] hda_intel: Disabling MSI [ 9.057057] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 9.160088] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 9.176554] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned. [ 9.180244] brcmsmac 0000:03:00.0: bus 3 slot 0 func 0 irq 11 [ 9.180397] brcmsmac 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.180500] brcmsmac 0000:03:00.0: setting latency timer to 64 [ 9.202710] applesmc: key=358 fan=2 temp=18 acc=1 lux=2 kbd=1 [ 9.232438] input: applesmc as /devices/platform/applesmc.768/input/input9 [ 9.232705] Registered led device: smc::kbd_backlight [ 9.269624] ieee80211 phy0: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw [ 9.269733] ieee80211 phy0: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm [ 9.269887] brcmsmac 0000:03:00.0: PCI INT A disabled [ 9.270000] brcmsmac: brcms_pci_probe: brcms_attach failed! [ 9.608695] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) [ 9.608875] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled [ 9.618270] intel ips 0000:00:1f.6: request irq failed, aborting [ 9.618399] intel ips: probe of 0000:00:1f.6 failed with error -16 [ 9.638750] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 9.677239] input: bcm5974 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.2/input/input10 [ 9.677503] usbcore: registered new interface driver bcm5974 [ 9.742520] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 9.846353] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 9.880099] Bluetooth: Core ver 2.16 [ 9.880217] NET: Registered protocol family 31 [ 9.880311] Bluetooth: HCI device and connection manager initialized [ 9.880402] Bluetooth: HCI socket layer initialized [ 9.880489] Bluetooth: L2CAP socket layer initialized [ 9.880582] Bluetooth: SCO socket layer initialized [ 9.950181] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 9.968282] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 9.998460] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 9.998662] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 9.998852] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 9.999042] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 10.171242] Linux media interface: v0.10 [ 10.214810] Linux video capture interface: v2.00 [ 10.371329] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8507) [ 10.377689] input: Built-in iSight as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.0/input/input15 [ 10.378018] usbcore: registered new interface driver uvcvideo [ 10.378113] USB Video Class driver (1.1.1) [ 10.418137] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 10.577487] padlock_aes: VIA PadLock not detected. [ 10.603790] usbcore: registered new interface driver btusb [ 10.654179] usb 1-1.1.1: USB disconnect, device number 6 [ 10.865251] usb 1-1.1.2: USB disconnect, device number 7 [ 11.590134] Disabling lock debugging due to kernel taint [ 11.590236] nvidia: module license 'NVIDIA' taints kernel. [ 11.684634] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.684741] nvidia 0000:01:00.0: setting latency timer to 64 [ 11.684746] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 11.685050] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011 [ 13.958279] Adding 11718744k swap on /dev/sda7. Priority:-1 extents:1 across:11718744k [ 14.412892] EXT3-fs (sda5): using internal journal [ 14.754441] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ] [ 14.830114] loop: module loaded [ 15.708189] kjournald starting. Commit interval 5 seconds [ 15.708890] EXT3-fs (sda9): using internal journal [ 15.709003] EXT3-fs (sda9): mounted filesystem with ordered data mode [ 16.919244] RPC: Registered named UNIX socket transport module. [ 16.919354] RPC: Registered udp transport module. [ 16.919440] RPC: Registered tcp transport module. [ 16.919528] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 17.015518] FS-Cache: Loaded [ 17.069137] FS-Cache: Netfs 'nfs' registered for caching [ 17.095885] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 17.498991] fuse init (API version 7.17) [ 19.968791] vboxdrv: Found 4 processor cores. [ 19.969133] vboxdrv: fAsync=0 offMin=0x11a offMax=0x106e [ 19.969279] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 19.969384] vboxdrv: Successfully loaded version 4.1.6_Debian (interface 0x00190000). [ 20.406266] vboxpci: IOMMU not found (not registered) [ 20.458001] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input16 [ 26.025036] tg3 0000:02:00.0: irq 43 for MSI/MSI-X [ 26.803614] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.289820] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 31.289824] Bluetooth: BNEP filters: protocol multicast [ 31.498684] Bluetooth: RFCOMM TTY layer initialized [ 31.498699] Bluetooth: RFCOMM socket layer initialized [ 31.498703] Bluetooth: RFCOMM ver 1.11 [ 32.941422] lp: driver loaded but no devices found [ 32.950223] ppdev: user-space parallel port driver [ 50.246316] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 50.246324] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX [ 50.247664] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 61.256746] eth0: no IPv6 routers present [ 163.311008] bzr-notify[3563]: segfault at 7fff2e3acf98 ip 00007f9a411cb45a sp 00007fff2e3acfa0 error 6 in libc-2.13.so[7f9a41189000+17a000] [ 277.065698] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 500.338929] ACPI: EC: GPE storm detected, transactions will use polling mode [ 911.407251] reportbug[4577] trap divide error ip:7fad9cbf66d8 sp:7fad9659de20 error:0 in libgtk-x11-2.0.so.0.2400.8[7fad9cac3000+435000] ** Model information sys_vendor: Apple Inc. product_name: MacBookPro6,2 product_version: 1.0 chassis_vendor: Apple Inc. chassis_version: Mac-F22586C8 bios_vendor: Apple Inc. bios_version: MBP61.88Z.0057.B0C.1007261552 board_vendor: Apple Inc. board_name: Mac-F22586C8 board_version: MacBookPro6,2 ** Loaded modules: acpi_cpufreq mperf cpufreq_stats cpufreq_conservative cpufreq_powersave cpufreq_userspace parport_pc ppdev lp parport rfcomm bnep snd_hrtimer pci_stub vboxpci (O) vboxnetadp (O) vboxnetflt (O) vboxdrv (O) binfmt_misc uinput fuse nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc loop firewire_sbp2 b43 bcma ssb mmc_core pcmcia pcmcia_core rng_core nvidia (P) uvcvideo aesni_intel cryptd videodev media aes_x86_64 aes_generic ecb btusb bluetooth crc16 v4l2_compat_ioctl32 bcm5974 intel_ips snd_hda_codec_hdmi joydev brcmsmac (C) i2c_i801 i2c_core snd_hda_codec_cirrus snd_seq_midi snd_hda_intel applesmc snd_hda_codec apple_bl mac80211 snd_rawmidi snd_hwdep brcmutil (C) snd_seq_midi_event snd_pcm_oss snd_mixer_oss snd_pcm cfg80211 snd_seq battery ac evdev iTCO_wdt iTCO_vendor_support video processor button rfkill pcspkr power_supply snd_timer snd_seq_device snd soundcore thermal_sys snd_page_alloc input_polldev ext3 jbd mbcache usb_storage sr_mod cdrom hid_apple uas sd_mod crc_t10dif usbhid ata_generic hid firewire_ohci firewire_core tg3 crc_itu_t libphy ata_piix uhci_hcd libata ehci_hcd scsi_mod usbcore ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 10:9a:dd:4e:c2:a3 brd ff:ff:ff:ff:ff:ff inet 192.168.10.42/24 brd 192.168.10.255 scope global eth0 inet6 fe80::129a:ddff:fe4e:c2a3/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 7762694 31510 0 0 0 0 0 0 7762694 31510 0 0 0 0 0 0 eth0: 22450713 20690 0 0 0 0 0 53 2536838 15552 0 0 0 0 0 0 *** Protocol statistics: Ip: 52302 total packets received 1 with invalid addresses 0 forwarded 0 incoming packets discarded 52301 incoming packets delivered 46834 requests sent out 6 dropped because of missing route Icmp: 70 ICMP messages received 25 input ICMP message failed. ICMP input histogram: destination unreachable: 70 41 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 41 IcmpMsg: InType3: 70 OutType3: 41 Tcp: 14983 active connections openings 35 passive connection openings 14298 failed connection attempts 20 connection resets received 40 connections established 50554 segments received 44816 segments send out 333 segments retransmited 0 bad segments received. 14450 resets sent Udp: 1663 packets received 3 packets to unknown port received. 0 packet receive errors 1726 packets sent UdpLite: TcpExt: 2 invalid SYN cookies received 1 packets pruned from receive queue because of socket buffer overrun 200 TCP sockets finished time wait in fast timer 740 delayed acks sent Quick ack mode was activated 73 times 14435 packet headers predicted 2079 acknowledgments not containing data payload received 881 predicted acknowledgments 44 congestion windows recovered without slow start after partial ack 33 timeouts after SACK recovery 5 timeouts in loss state 34 retransmits in slow start 216 other TCP timeouts 70 packets collapsed in receive queue due to low socket buffer 73 DSACKs sent for old packets 29 connections reset due to unexpected data 4 connections reset due to early user close 1 connections aborted due to timeout TCPSackShiftFallback: 5 TCPDeferAcceptDrop: 5 IpExt: InMcastPkts: 184 OutMcastPkts: 149 InBcastPkts: 145 OutBcastPkts: 143 InOctets: 29870420 OutOctets: 9992487 InMcastOctets: 16201 OutMcastOctets: 17606 InBcastOctets: 25746 OutBcastOctets: 25554 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 18) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 18) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c0000000-c10fffff Prefetchable memory behind bridge: 0000000090000000-00000000a1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b3b] (rev 06) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 4: I/O ports at 3100 [size=32] Capabilities: <access denied> 00:1a.7 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 0: Memory at c1d05c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06) Subsystem: Intel Corporation Device [8086:7270] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at c1d00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: c1c00000-c1cfffff Prefetchable memory behind bridge: 00000000a2600000-00000000a27fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: c1b00000-c1bfffff Prefetchable memory behind bridge: 00000000a2400000-00000000a25fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: c1a00000-c1afffff Prefetchable memory behind bridge: 00000000a2200000-00000000a23fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: c1900000-c19fffff Prefetchable memory behind bridge: 00000000a2000000-00000000a21fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b36] (rev 06) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 4: I/O ports at 30a0 [size=32] Capabilities: <access denied> 00:1d.7 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at c1d05800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 Memory behind bridge: c1800000-c18fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 06) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b28] (rev 06) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 3128 [size=8] Region 1: I/O ports at 313c [size=4] Region 2: I/O ports at 3120 [size=8] Region 3: I/O ports at 3138 [size=4] Region 4: I/O ports at 3020 [size=16] Region 5: I/O ports at ffe0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 20 Region 0: Memory at c1d06000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] Kernel driver in use: i801_smbus 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at c1d04000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 01:00.0 VGA compatible controller [0300]: nVidia Corporation GT216 [GeForce GT 330M] [10de:0a29] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Apple Computer Inc. Device [106b:00c7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at 90000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at a0000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 2000 [size=128] [virtual] Expansion ROM at c1000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia 01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio Controller [10de:0be2] (rev a1) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at c1080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe [14e4:1684] (rev 10) Subsystem: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe [14e4:1684] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at c1c00000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 03:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Computer Inc. Device [106b:0093] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 17 Region 0: Memory at c1b00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 04:00.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW643 PCI Express 1394b Controller (PHY/Link) [11c1:5901] (rev 08) (prog-if 10 [OHCI]) Subsystem: Agere Systems Device [11c1:5900] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at c1a00000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 002 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 001 Device 004: ID 05ac:0237 Apple, Inc. Internal Keyboard/Trackpad (ISO) Bus 001 Device 005: ID 05ac:8403 Apple, Inc. Internal Memory Card Reader Bus 002 Device 003: ID 05ac:8507 Apple, Inc. Built-in iSight Bus 002 Device 004: ID 05ac:8242 Apple, Inc. IR Receiver [built-in] Bus 002 Device 005: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse Bus 001 Device 008: ID 05ac:8218 Apple, Inc. Bluetooth Host Controller -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.1.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.1.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.4 ii module-init-tools 3.16-1 Versions of packages linux-image-3.1.0-1-amd64 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.1.0-1-amd64 suggests: pn extlinux 2:4.04+dfsg-9 pn grub-pc 1.99-14 pn linux-doc-3.1 <none> Versions of packages linux-image-3.1.0-1-amd64 is related to: pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi 0.34 pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk: linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true * linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64:
--- End Message ---
--- Begin Message ---
- To: 651714-done@bugs.debian.org
- Subject: Re: Bug#651714: linux-image-3.1.0-1-amd64: b43 driver not working because of bcma_pci_bridge_tbl missing entries
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 11 Dec 2011 16:40:19 +0000
- Message-id: <1323621619.25752.25.camel@deadeye>
- In-reply-to: <[🔎] 20111211162316.4594.13341.reportbug@adrianworktop>
- References: <[🔎] 20111211162316.4594.13341.reportbug@adrianworktop>
From the changelog: * Enable BCMA as module, BCMA_HOST_PCI and B43_BCMA (Closes: #649567) but limit these to devices not supported by brcmsmac * brcmsmac: Enable as module for all architectures The bcrmsmac driver is the right one for this chip; b43 doesn't support it fully. The problem is: > [ 9.269624] ieee80211 phy0: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw > [ 9.269733] ieee80211 phy0: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm So you need to install the firmware-brcm80211 package. Ben. -- Ben Hutchings I'm always amazed by the number of people who take up solipsism because they heard someone else explain it. - E*Borg on alt.fan.pratchettAttachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---