Your message dated Sun, 04 Dec 2011 14:27:56 +0000 with message-id <1323008876.7454.116.camel@deadeye> and subject line Re: Bug#650916: linux-image-3.1.0-1-amd64: WARNING in iommu/dmar.c when VT-d is enabled in BIOS has caused the Debian Bug report #650916, regarding linux-image-3.1.0-1-amd64: WARNING in iommu/dmar.c when VT-d is enabled in BIOS to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 650916: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=650916 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.1.0-1-amd64: WARNING in iommu/dmar.c when VT-d is enabled in BIOS
- From: Rik Theys <Rik.Theys@gmail.com>
- Date: Sun, 04 Dec 2011 11:48:28 +0100
- Message-id: <[🔎] 20111204104828.4031.15393.reportbug@saturn.home.lan>
Package: linux-2.6 Version: 3.1.4-1 Severity: minor Hi, When I enable VT-d in the BIOS, the linux kernel produces the following WARNING on boot, resulting in a tainted kernel: [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /home/blank/debian/kernel/release/linux-2.6/linux-2.6-3.1.4/debian/build/source_amd64_none/drivers/iommu/dmar.c:634 warn_invalid_dmar+0x77/0x85() [ 0.000000] Hardware name: System Product Name [ 0.000000] Your BIOS is broken; DMAR reported at address fed90000 returns all ones! [ 0.000000] BIOS vendor: American Megatrends Inc.; Ver: 1504 ; Product Version: System Version [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 3.1.0-1-amd64 #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81045775>] ? warn_slowpath_common+0x78/0x8c [ 0.000000] [<ffffffff810457d7>] ? warn_slowpath_fmt_taint+0x3d/0x42 [ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8 [ 0.000000] [<ffffffff816b7917>] ? __early_set_fixmap+0x89/0x8d [ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8 [ 0.000000] [<ffffffff816b7917>] ? __early_set_fixmap+0x89/0x8d [ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8 [ 0.000000] [<ffffffff8125710d>] ? warn_invalid_dmar+0x77/0x85 [ 0.000000] [<ffffffff816b7d24>] ? early_iounmap+0xc5/0x114 [ 0.000000] [<ffffffff816d7748>] ? check_zero_address+0xb0/0xeb [ 0.000000] [<ffffffff81336c66>] ? bad_to_user+0x620/0x620 [ 0.000000] [<ffffffff816d7794>] ? detect_intel_iommu+0x11/0xa6 [ 0.000000] [<ffffffff816abd7b>] ? pci_iommu_alloc+0x3f/0x67 [ 0.000000] [<ffffffff816b76f6>] ? mem_init+0x14/0xe5 [ 0.000000] [<ffffffff816a5961>] ? start_kernel+0x1d0/0x3c8 [ 0.000000] [<ffffffff816a5140>] ? early_idt_handlers+0x140/0x140 [ 0.000000] [<ffffffff816a53c4>] ? x86_64_start_kernel+0x104/0x111 [ 0.000000] ---[ end trace a7919e7f17c0a725 ]--- I guess this is caused by a buggy bios (as indicated) and nothing can be done from the kernel side? Except maybe the kernel shouldn't produce a WARNING (and kernel taint) because of this? The motherboard in question is an ASUS P7P55D-E running bios version 1504, which is the latest version. I've always had this error, even with previous bios versions and earlier kernel versions. Even the (pre-)squeeze kernels had this. Feel free to simply close this if the WARNING is the expected behaviour on broken bioses. The reportbug output below is taken when the VT-d feature is disabled. I'll attach the dmesg output from a boot into single user with VT-d enabled. Regards, Rik -- Package-specific info: ** Version: Linux version 3.1.0-1-amd64 (Debian 3.1.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-5) ) #1 SMP Tue Nov 29 13:47:12 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/vg_saturn-root ro quiet ipv6.disable=1 ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 7.207264] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 7.207379] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011 [ 7.226581] snd_bt87x 0000:0a:02.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.226664] bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 7.314649] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.314690] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X [ 7.314708] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 7.319399] Linux media interface: v0.10 [ 7.436454] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.436457] hda_intel: Disabling MSI [ 7.436545] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 7.630927] Linux video capture interface: v2.00 [ 7.696180] IR NEC protocol handler initialized [ 7.717961] bttv: driver version 0.9.19 loaded [ 7.717963] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 7.717992] bttv: Bt8xx card found (0). [ 7.718000] bttv 0000:0a:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.718008] bttv0: Bt878 (rev 2) at 0000:0a:02.0, irq: 17, latency: 64, mmio: 0xf4ffe000 [ 7.718022] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 7.718024] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 7.718046] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init] [ 7.720526] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 7.753588] tveeprom 1-0050: Hauppauge model 61204, rev B1M , serial# 3176099 [ 7.753591] tveeprom 1-0050: tuner model is Philips FI1216 MK2 (idx 8, type 5) [ 7.753593] tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) [ 7.753595] tveeprom 1-0050: audio processor is None (idx 0) [ 7.753597] tveeprom 1-0050: has no radio [ 7.753598] bttv0: Hauppauge eeprom indicates model#61204 [ 7.753600] bttv0: tuner type=5 [ 7.753996] IR RC5(x) protocol handler initialized [ 7.778717] i2c-core: driver [msp3400] using legacy suspend method [ 7.778719] i2c-core: driver [msp3400] using legacy resume method [ 7.781435] IR RC6 protocol handler initialized [ 7.792918] IR JVC protocol handler initialized [ 7.794042] IR Sony protocol handler initialized [ 7.795126] IR MCE Keyboard/mouse protocol handler initialized [ 7.797549] lirc_dev: IR Remote Control driver registered, major 249 [ 7.797952] IR LIRC bridge handler initialized [ 7.800315] bttv0: audio absent, no audio device found! [ 7.805792] i2c-core: driver [tuner] using legacy suspend method [ 7.805794] i2c-core: driver [tuner] using legacy resume method [ 7.810468] tuner 1-0061: Tuner -1 found with type(s) Radio TV. [ 7.858129] tuner-simple 1-0061: creating new instance [ 7.858131] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 7.858866] bttv0: registered device video0 [ 7.858905] bttv0: registered device vbi0 [ 7.858926] bttv0: PLL: 28636363 => 35468950 .. ok [ 8.031777] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 8.135553] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 8.243297] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 8.354953] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 8.403488] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input4 [ 8.403973] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input5 [ 8.404114] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input6 [ 8.404188] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input7 [ 8.982317] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 9.174193] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 9.298966] loop: module loaded [ 10.102460] Adding 8388604k swap on /dev/mapper/vg_saturn-swap. Priority:-1 extents:1 across:8388604k [ 10.709952] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 10.775254] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 10.815603] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 10.866797] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 11.506336] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.590444] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 12.171983] Bridge firewalling registered [ 12.180976] device eth0 entered promiscuous mode [ 12.289163] r8169 0000:02:00.0: eth0: link down [ 12.289169] r8169 0000:02:00.0: eth0: link down [ 15.051347] r8169 0000:02:00.0: eth0: link up [ 15.052763] br0: port 1(eth0) entering forwarding state [ 15.052768] br0: port 1(eth0) entering forwarding state [ 20.383729] RPC: Registered named UNIX socket transport module. [ 20.383731] RPC: Registered udp transport module. [ 20.383732] RPC: Registered tcp transport module. [ 20.383734] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 20.438913] FS-Cache: Loaded [ 20.464674] FS-Cache: Netfs 'nfs' registered for caching [ 20.479805] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 21.230866] fuse init (API version 7.17) [ 25.312015] Bluetooth: Core ver 2.16 [ 25.312027] NET: Registered protocol family 31 [ 25.312029] Bluetooth: HCI device and connection manager initialized [ 25.312031] Bluetooth: HCI socket layer initialized [ 25.312032] Bluetooth: L2CAP socket layer initialized [ 25.312036] Bluetooth: SCO socket layer initialized [ 25.351611] Bluetooth: RFCOMM TTY layer initialized [ 25.351620] Bluetooth: RFCOMM socket layer initialized [ 25.351622] Bluetooth: RFCOMM ver 1.11 [ 25.394337] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.394341] Bluetooth: BNEP filters: protocol multicast [ 26.323402] lp: driver loaded but no devices found [ 26.339876] ppdev: user-space parallel port driver [ 34.573641] Ebtables v2.0 registered [ 34.624611] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 43.925622] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 [ 44.019799] EXT4-fs (md0): re-mounted. Opts: commit=0 [ 44.612025] EXT4-fs (dm-2): re-mounted. Opts: commit=0 [ 44.688185] EXT4-fs (sdb1): re-mounted. Opts: commit=0 [ 44.689748] EXT4-fs (dm-1): re-mounted. Opts: commit=0 ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 1504 board_vendor: ASUSTeK Computer INC. board_name: P7P55D-E board_version: Rev 1.xx ** Loaded modules: ip6_tables ebtable_nat ebtables parport_pc ppdev lp parport bnep rfcomm bluetooth rfkill acpi_cpufreq mperf cpufreq_userspace cpufreq_powersave cpufreq_conservative cpufreq_stats fuse nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc bridge stp xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables dm_crypt loop firewire_sbp2 kvm_intel kvm snd_hda_codec_hdmi tuner_simple tuner_types tuner ir_lirc_codec lirc_dev ir_mce_kbd_decoder tvaudio ir_sony_decoder tda7432 ir_jvc_decoder ir_rc6_decoder msp3400 ir_rc5_decoder bttv ir_nec_decoder i2c_algo_bit videobuf_dma_sg videobuf_core btcx_risc rc_core tveeprom v4l2_common videodev snd_hda_codec_via media snd_hda_intel snd_hda_codec v4l2_compat_ioctl32 snd_bt87x nvidia (P) snd_hwdep i7core_edac snd_pcm snd_seq snd_timer snd_seq_device iTCO_wdt edac_core evdev i2c_i801 processor snd iTCO_vendor_support asus_atk0110 thermal_sys soundcore snd_page_alloc i2c_core button ext4 mbcache jbd2 crc16 btrfs zlib_deflate crc32c libcrc32c dm_mod raid1 raid0 md_mod sr_mod cdrom sd_mod crc_t10dif usb_storage usbhid hid uas firewire_ohci firewire_core crc_itu_t ahci libahci xhci_hcd ehci_hcd libata scsi_mod r8169 mii usbcore ** Network interface configuration: auto lo iface lo inet loopback up /sbin/iptables-restore < /etc/network/iptables auto eth0 iface eth0 inet manual auto br0 iface br0 inet dhcp bridge_ports eth0 bridge_maxwait 0 bridge_fd 0 bridge_hello 0 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP qlen 1000 link/ether e0:cb:4e:25:19:a7 brd ff:ff:ff:ff:ff:ff 3: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether e0:cb:4e:25:19:a7 brd ff:ff:ff:ff:ff:ff inet 192.168.0.5/24 brd 192.168.0.255 scope global br0 *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 11208 148 0 0 0 0 0 0 11208 148 0 0 0 0 0 0 eth0: 2253001 2114 0 0 0 0 0 0 305814 1949 0 0 0 0 0 0 br0: 2200791 1846 0 1 0 0 0 0 305562 1947 0 0 0 0 0 0 *** Protocol statistics: Ip: 2037 total packets received 0 forwarded 0 incoming packets discarded 2037 incoming packets delivered 2083 requests sent out Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 133 active connections openings 14 passive connection openings 4 failed connection attempts 0 connection resets received 70 connections established 1851 segments received 1891 segments send out 12 segments retransmited 0 bad segments received. 25 resets sent Udp: 169 packets received 0 packets to unknown port received. 0 packet receive errors 174 packets sent UdpLite: TcpExt: 24 TCP sockets finished time wait in fast timer 22 delayed acks sent Quick ack mode was activated 18 times 1106 packet headers predicted 185 acknowledgments not containing data payload received 2 predicted acknowledgments 10 congestion windows recovered without slow start after partial ack 12 other TCP timeouts 18 DSACKs sent for old packets 2 DSACKs received 2 connections reset due to unexpected data TCPSackShiftFallback: 1 IpExt: InMcastPkts: 46 OutMcastPkts: 42 InBcastPkts: 9 OutBcastPkts: 7 InOctets: 2216560 OutOctets: 288576 InMcastOctets: 4693 OutMcastOctets: 4565 InBcastOctets: 984 OutBcastOctets: 328 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11) Subsystem: ASUSTeK Computer Inc. Device [1043:8383] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f6000000-f7cfffff Prefetchable memory behind bridge: 00000000e0000000-00000000f3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11) Subsystem: Device [0043:0083] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11) Subsystem: Device [0043:0083] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11) Subsystem: Device [0043:0083] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8383] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f5ffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05) Subsystem: ASUSTeK Computer Inc. Device [1043:8375] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 52 Region 0: Memory at f5ff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f4c00000-f4dfffff Prefetchable memory behind bridge: 00000000f5000000-00000000f51fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f4800000-f49fffff Prefetchable memory behind bridge: 00000000f4a00000-00000000f4bfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f4400000-f45fffff Prefetchable memory behind bridge: 00000000f4600000-00000000f47fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f4000000-f41fffff Prefetchable memory behind bridge: 00000000f4200000-00000000f43fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: f7e00000-f7efffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 05) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 [8086:3b4e] (rev 05) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.7 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 [8086:3b50] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f7d00000-f7dfffff Prefetchable memory behind bridge: 00000000f4e00000-00000000f4efffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8383] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f5ffd000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f7f00000-f7ffffff Prefetchable memory behind bridge: 00000000f4f00000-00000000f4ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b02] (rev 05) Subsystem: ASUSTeK Computer Inc. Device [1043:8383] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:8383] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 51 Region 0: I/O ports at b880 [size=8] Region 1: I/O ports at b800 [size=4] Region 2: I/O ports at b480 [size=8] Region 3: I/O ports at b400 [size=4] Region 4: I/O ports at b080 [size=32] Region 5: Memory at f5ff7000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05) Subsystem: ASUSTeK Computer Inc. Device [1043:8383] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f5ffc000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at ffe0 [size=32] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: nVidia Corporation GT216 [GeForce GT 220] [10de:0a20] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:832f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f2000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at cc00 [size=128] [virtual] Expansion ROM at f7c00000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia 01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio Controller [10de:0be2] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:832f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7cfc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:83a3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 45 Region 0: I/O ports at d800 [size=256] Region 2: Memory at f4eff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f4ef8000 (64-bit, prefetchable) [size=16K] Expansion ROM at f7df0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 05:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8413] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7efe000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 0a:02.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 02) Subsystem: Hauppauge computer works Inc. WinTV Series [0070:13eb] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at f4ffe000 (32-bit, prefetchable) [size=4K] Kernel driver in use: bttv 0a:02.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 02) Subsystem: Hauppauge computer works Inc. WinTV Series [0070:13eb] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at f4fff000 (32-bit, prefetchable) [size=4K] Kernel driver in use: snd_bt87x 0a:04.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f7fff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at ec00 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci 3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c51] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: i7core_edac 3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 004 Device 004: ID 0424:2640 Standard Microsystems Corp. USB 2.0 Hub Bus 004 Device 005: ID 0424:4060 Standard Microsystems Corp. Ultra Fast Media Reader Bus 004 Device 006: ID 046d:c401 Logitech, Inc. TrackMan Marble Wheel -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.1.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.1.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.4 ii module-init-tools 3.16-1 Versions of packages linux-image-3.1.0-1-amd64 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.1.0-1-amd64 suggests: pn grub-pc 1.99-14 pn linux-doc-3.1 <none> Versions of packages linux-image-3.1.0-1-amd64 is related to: pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-ipw2x00 <none> pn firmware-ivtv 0.34 pn firmware-iwlwifi <none> pn firmware-linux 0.34 pn firmware-linux-nonfree 0.34 pn firmware-qlogic <none> pn firmware-ralink <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk: linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64:[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-1-amd64 (Debian 3.1.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-5) ) #1 SMP Tue Nov 29 13:47:12 UTC 2011 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/vg_saturn-root ro ipv6.disable=1 single [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe70000 (usable) [ 0.000000] BIOS-e820: 00000000dfe70000 - 00000000dfe88000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfe88000 - 00000000dfedc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfedc000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/P7P55D-E, BIOS 1504 12/14/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfe70 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfe70000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfe70000 page 4k [ 0.000000] kernel direct mapping tables up to dfe70000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000 [ 0.000000] 0100000000 - 0220000000 page 2M [ 0.000000] kernel direct mapping tables up to 220000000 @ dfe66000-dfe70000 [ 0.000000] RAMDISK: 368ee000 - 3746f000 [ 0.000000] ACPI: RSDP 00000000000fb920 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000dfe70100 0006C (v01 121410 XSDT1514 20101214 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000dfe70290 000F4 (v03 121410 FACP1514 20101214 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000dfe704a0 0EF6A (v01 A1511 A1511001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000dfe88000 00040 [ 0.000000] ACPI: APIC 00000000dfe70390 000CC (v01 121410 APIC1514 20101214 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000dfe70460 0003C (v01 121410 OEMMCFG 20101214 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000dfe88040 00072 (v01 121410 OEMB1514 20101214 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000dfe7f410 00038 (v01 121410 OEMHPET 20101214 MSFT 00000097) [ 0.000000] ACPI: DMAR 00000000dfe880c0 00090 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: ASPT 00000000dfe7f6b0 00034 (v06 121410 PerfTune 20101214 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000dfe7f6f0 000B0 (v01 121410 OEMOSFR 20101214 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000dfe89760 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000220000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000 [ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff] [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217600000-ffff88021e7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00220000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000dfe70 [ 0.000000] 0: 0x00100000 -> 0x00220000 [ 0.000000] On node 0 totalpages: 2096638 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898728 pages, LIFO batch:31 [ 0.000000] Normal zone: 16128 pages used for memmap [ 0.000000] Normal zone: 1163520 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfe70000 - 00000000dfe88000 [ 0.000000] PM: Registered nosave memory: 00000000dfe88000 - 00000000dfedc000 [ 0.000000] PM: Registered nosave memory: 00000000dfedc000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021fc00000 s80768 r8192 d21632 u131072 [ 0.000000] pcpu-alloc: s80768 r8192 d21632 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066169 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/vg_saturn-root ro ipv6.disable=1 single [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /home/blank/debian/kernel/release/linux-2.6/linux-2.6-3.1.4/debian/build/source_amd64_none/drivers/iommu/dmar.c:634 warn_invalid_dmar+0x77/0x85() [ 0.000000] Hardware name: System Product Name [ 0.000000] Your BIOS is broken; DMAR reported at address fed90000 returns all ones! [ 0.000000] BIOS vendor: American Megatrends Inc.; Ver: 1504 ; Product Version: System Version [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 3.1.0-1-amd64 #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81045775>] ? warn_slowpath_common+0x78/0x8c [ 0.000000] [<ffffffff810457d7>] ? warn_slowpath_fmt_taint+0x3d/0x42 [ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8 [ 0.000000] [<ffffffff816b7917>] ? __early_set_fixmap+0x89/0x8d [ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8 [ 0.000000] [<ffffffff816b7917>] ? __early_set_fixmap+0x89/0x8d [ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8 [ 0.000000] [<ffffffff8125710d>] ? warn_invalid_dmar+0x77/0x85 [ 0.000000] [<ffffffff816b7d24>] ? early_iounmap+0xc5/0x114 [ 0.000000] [<ffffffff816d7748>] ? check_zero_address+0xb0/0xeb [ 0.000000] [<ffffffff81336c66>] ? bad_to_user+0x620/0x620 [ 0.000000] [<ffffffff816d7794>] ? detect_intel_iommu+0x11/0xa6 [ 0.000000] [<ffffffff816abd7b>] ? pci_iommu_alloc+0x3f/0x67 [ 0.000000] [<ffffffff816b76f6>] ? mem_init+0x14/0xe5 [ 0.000000] [<ffffffff816a5961>] ? start_kernel+0x1d0/0x3c8 [ 0.000000] [<ffffffff816a5140>] ? early_idt_handlers+0x140/0x140 [ 0.000000] [<ffffffff816a53c4>] ? x86_64_start_kernel+0x104/0x111 [ 0.000000] ---[ end trace a7919e7f17c0a725 ]--- [ 0.000000] Disabling lock debugging due to kernel taint [ 0.000000] Memory: 8181744k/8912896k available (3291k kernel code, 526344k absent, 204808k reserved, 3428k data, 556k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:808 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2675.167 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5350.33 BogoMIPS (lpj=10700668) [ 0.000125] pid_max: default: 32768 minimum: 301 [ 0.000218] Security Framework initialized [ 0.000923] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002537] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003305] Mount-cache hash table entries: 256 [ 0.003467] Initializing cgroup subsys cpuacct [ 0.003530] Initializing cgroup subsys memory [ 0.003601] Initializing cgroup subsys devices [ 0.003661] Initializing cgroup subsys freezer [ 0.003721] Initializing cgroup subsys net_cls [ 0.003780] Initializing cgroup subsys blkio [ 0.003863] CPU: Physical Processor ID: 0 [ 0.003921] CPU: Processor Core ID: 0 [ 0.003982] mce: CPU supports 9 MCE banks [ 0.004048] CPU0: Thermal monitoring enabled (TM1) [ 0.004113] using mwait in idle threads. [ 0.004497] ACPI: Core revision 20110623 [ 0.112816] DMAR: Host address width 36 [ 0.112876] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.112945] DMAR: parse DMAR table failure. [ 0.113005] Switched APIC routing to physical flat. [ 0.113387] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.153050] CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz stepping 05 [ 0.259931] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver. [ 0.260171] ... version: 3 [ 0.260230] ... bit width: 48 [ 0.260289] ... generic registers: 4 [ 0.260347] ... value mask: 0000ffffffffffff [ 0.260407] ... max period: 000000007fffffff [ 0.260467] ... fixed-purpose events: 3 [ 0.260526] ... event mask: 000000070000000f [ 0.260819] NMI watchdog enabled, takes one hw-pmu counter. [ 0.260967] Booting Node 0, Processors #1 [ 0.261054] smpboot cpu 1: start_ip = 99000 [ 0.371815] NMI watchdog enabled, takes one hw-pmu counter. [ 0.371970] #2 [ 0.372014] smpboot cpu 2: start_ip = 99000 [ 0.479599] NMI watchdog enabled, takes one hw-pmu counter. [ 0.479752] #3 [ 0.479796] smpboot cpu 3: start_ip = 99000 [ 0.587281] NMI watchdog enabled, takes one hw-pmu counter. [ 0.587370] Brought up 4 CPUs [ 0.587427] Total of 4 processors activated (21399.27 BogoMIPS). [ 0.589329] devtmpfs: initialized [ 0.592603] PM: Registering ACPI NVS region at dfe88000 (344064 bytes) [ 0.598553] print_constraints: dummy: [ 0.598658] NET: Registered protocol family 16 [ 0.598798] ACPI: bus type pci registered [ 0.598911] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.598991] PCI: not using MMCONFIG [ 0.599049] PCI: Using configuration type 1 for base access [ 0.599632] bio: create slab <bio-0> at 0 [ 0.599775] ACPI: Added _OSI(Module Device) [ 0.599835] ACPI: Added _OSI(Processor Device) [ 0.599895] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.599955] ACPI: Added _OSI(Processor Aggregator Device) [ 0.601187] ACPI: EC: Look up EC in DSDT [ 0.602355] ACPI: Executed 1 blocks of module-level executable AML code [ 0.612984] ACPI: SSDT 00000000dfe88150 01130 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.613484] ACPI: Dynamic OEM Table Load: [ 0.613622] ACPI: SSDT (null) 01130 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.613862] ACPI: SSDT 00000000dfe89280 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.614303] ACPI: Dynamic OEM Table Load: [ 0.614441] ACPI: SSDT (null) 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.614910] ACPI: Interpreter enabled [ 0.614971] ACPI: (supports S0 S1 S3 S4 S5) [ 0.615252] ACPI: Using IOAPIC for interrupt routing [ 0.615331] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.616626] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.627825] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.628032] ACPI: No dock devices found. [ 0.628091] HEST: Table not found. [ 0.628149] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.628422] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.628649] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.628713] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.628776] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.628853] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.628930] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff] [ 0.629007] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed8ffff] [ 0.629093] pci 0000:00:00.0: [8086:d131] type 0 class 0x000600 [ 0.629136] pci 0000:00:03.0: [8086:d138] type 1 class 0x000604 [ 0.629171] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.629174] pci 0000:00:03.0: PME# disabled [ 0.629192] pci 0000:00:08.0: [8086:d155] type 0 class 0x000880 [ 0.629239] pci 0000:00:08.1: [8086:d156] type 0 class 0x000880 [ 0.629285] pci 0000:00:08.2: [8086:d157] type 0 class 0x000880 [ 0.629330] pci 0000:00:08.3: [8086:d158] type 0 class 0x000880 [ 0.629374] pci 0000:00:10.0: [8086:d150] type 0 class 0x000880 [ 0.629412] pci 0000:00:10.1: [8086:d151] type 0 class 0x000880 [ 0.629470] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 [ 0.629489] pci 0000:00:1a.0: reg 10: [mem 0xf5ffe000-0xf5ffe3ff] [ 0.629554] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.629558] pci 0000:00:1a.0: PME# disabled [ 0.629580] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 [ 0.629593] pci 0000:00:1b.0: reg 10: [mem 0xf5ff8000-0xf5ffbfff 64bit] [ 0.629641] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.629644] pci 0000:00:1b.0: PME# disabled [ 0.629663] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 [ 0.629711] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.629715] pci 0000:00:1c.0: PME# disabled [ 0.629734] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 [ 0.629782] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.629785] pci 0000:00:1c.1: PME# disabled [ 0.629804] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604 [ 0.629852] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.629856] pci 0000:00:1c.2: PME# disabled [ 0.629874] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604 [ 0.629923] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.629926] pci 0000:00:1c.3: PME# disabled [ 0.629945] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604 [ 0.629992] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.629996] pci 0000:00:1c.4: PME# disabled [ 0.630014] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604 [ 0.630062] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.630065] pci 0000:00:1c.5: PME# disabled [ 0.630084] pci 0000:00:1c.6: [8086:3b4e] type 1 class 0x000604 [ 0.630132] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.630135] pci 0000:00:1c.6: PME# disabled [ 0.630154] pci 0000:00:1c.7: [8086:3b50] type 1 class 0x000604 [ 0.630201] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.630204] pci 0000:00:1c.7: PME# disabled [ 0.630228] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 [ 0.630247] pci 0000:00:1d.0: reg 10: [mem 0xf5ffd000-0xf5ffd3ff] [ 0.630312] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.630316] pci 0000:00:1d.0: PME# disabled [ 0.630334] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.630384] pci 0000:00:1f.0: [8086:3b02] type 0 class 0x000601 [ 0.630489] pci 0000:00:1f.2: [8086:3b22] type 0 class 0x000106 [ 0.630505] pci 0000:00:1f.2: reg 10: [io 0xb880-0xb887] [ 0.630512] pci 0000:00:1f.2: reg 14: [io 0xb800-0xb803] [ 0.630519] pci 0000:00:1f.2: reg 18: [io 0xb480-0xb487] [ 0.630526] pci 0000:00:1f.2: reg 1c: [io 0xb400-0xb403] [ 0.630533] pci 0000:00:1f.2: reg 20: [io 0xb080-0xb09f] [ 0.630540] pci 0000:00:1f.2: reg 24: [mem 0xf5ff7000-0xf5ff77ff] [ 0.630569] pci 0000:00:1f.2: PME# supported from D3hot [ 0.630572] pci 0000:00:1f.2: PME# disabled [ 0.630587] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 [ 0.630601] pci 0000:00:1f.3: reg 10: [mem 0xf5ffc000-0xf5ffc0ff 64bit] [ 0.630619] pci 0000:00:1f.3: reg 20: [io 0xffe0-0xffff] [ 0.630677] pci 0000:01:00.0: [10de:0a20] type 0 class 0x000300 [ 0.630686] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] [ 0.630695] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.630705] pci 0000:01:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.630711] pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f] [ 0.630718] pci 0000:01:00.0: reg 30: [mem 0xf7c00000-0xf7c7ffff pref] [ 0.630757] pci 0000:01:00.1: [10de:0be2] type 0 class 0x000403 [ 0.630766] pci 0000:01:00.1: reg 10: [mem 0xf7cfc000-0xf7cfffff] [ 0.635136] pci 0000:00:03.0: PCI bridge to [bus 01-01] [ 0.635206] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.635209] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf7cfffff] [ 0.635213] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf3ffffff 64bit pref] [ 0.635249] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.635352] pci 0000:00:1c.1: PCI bridge to [bus 08-08] [ 0.635452] pci 0000:00:1c.2: PCI bridge to [bus 07-07] [ 0.635553] pci 0000:00:1c.3: PCI bridge to [bus 06-06] [ 0.635678] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03 [ 0.635703] pci 0000:05:00.0: reg 10: [mem 0xf7efe000-0xf7efffff 64bit] [ 0.635806] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.635811] pci 0000:05:00.0: PME# disabled [ 0.643123] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.643195] pci 0000:00:1c.4: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.643235] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 0.643335] pci 0000:00:1c.6: PCI bridge to [bus 03-03] [ 0.643453] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.643468] pci 0000:02:00.0: reg 10: [io 0xd800-0xd8ff] [ 0.643494] pci 0000:02:00.0: reg 18: [mem 0xf4eff000-0xf4efffff 64bit pref] [ 0.643511] pci 0000:02:00.0: reg 20: [mem 0xf4ef8000-0xf4efbfff 64bit pref] [ 0.643523] pci 0000:02:00.0: reg 30: [mem 0xf7df0000-0xf7dfffff pref] [ 0.643559] pci 0000:02:00.0: supports D1 D2 [ 0.643561] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.643566] pci 0000:02:00.0: PME# disabled [ 0.651112] pci 0000:00:1c.7: PCI bridge to [bus 02-02] [ 0.651183] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.651186] pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.651191] pci 0000:00:1c.7: bridge window [mem 0xf4e00000-0xf4efffff 64bit pref] [ 0.651219] pci 0000:0a:02.0: [109e:036e] type 0 class 0x000400 [ 0.651231] pci 0000:0a:02.0: reg 10: [mem 0xf4ffe000-0xf4ffefff pref] [ 0.651288] pci 0000:0a:02.1: [109e:0878] type 0 class 0x000480 [ 0.651300] pci 0000:0a:02.1: reg 10: [mem 0xf4fff000-0xf4ffffff pref] [ 0.651367] pci 0000:0a:04.0: [1106:3044] type 0 class 0x000c00 [ 0.651383] pci 0000:0a:04.0: reg 10: [mem 0xf7fff000-0xf7fff7ff] [ 0.651393] pci 0000:0a:04.0: reg 14: [io 0xec00-0xec7f] [ 0.651447] pci 0000:0a:04.0: supports D2 [ 0.651449] pci 0000:0a:04.0: PME# supported from D2 D3hot D3cold [ 0.651453] pci 0000:0a:04.0: PME# disabled [ 0.651488] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode) [ 0.651554] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.651558] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.651563] pci 0000:00:1e.0: bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref] [ 0.651565] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.651567] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.651569] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.651572] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.651574] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.651576] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode) [ 0.651612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.651819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] [ 0.651901] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR21._PRT] [ 0.651934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT] [ 0.651968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT] [ 0.652003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] [ 0.652036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT] [ 0.652069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT] [ 0.652102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT] [ 0.652143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT] [ 0.652183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 0.652330] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.652598] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d [ 0.652676] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.665151] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.665690] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.665906] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.666444] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.666982] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.667618] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.668156] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.668695] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.669280] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.669361] vgaarb: loaded [ 0.669417] vgaarb: bridge control possible 0000:01:00.0 [ 0.669504] PCI: Using ACPI for IRQ routing [ 0.670737] PCI: Discovered peer bus 3f [ 0.670821] pci 0000:3f:00.0: [8086:2c51] type 0 class 0x000600 [ 0.670838] pci 0000:3f:00.1: [8086:2c81] type 0 class 0x000600 [ 0.670855] pci 0000:3f:02.0: [8086:2c90] type 0 class 0x000600 [ 0.670870] pci 0000:3f:02.1: [8086:2c91] type 0 class 0x000600 [ 0.670886] pci 0000:3f:03.0: [8086:2c98] type 0 class 0x000600 [ 0.670901] pci 0000:3f:03.1: [8086:2c99] type 0 class 0x000600 [ 0.670917] pci 0000:3f:03.4: [8086:2c9c] type 0 class 0x000600 [ 0.670933] pci 0000:3f:04.0: [8086:2ca0] type 0 class 0x000600 [ 0.670948] pci 0000:3f:04.1: [8086:2ca1] type 0 class 0x000600 [ 0.670963] pci 0000:3f:04.2: [8086:2ca2] type 0 class 0x000600 [ 0.670978] pci 0000:3f:04.3: [8086:2ca3] type 0 class 0x000600 [ 0.670994] pci 0000:3f:05.0: [8086:2ca8] type 0 class 0x000600 [ 0.671010] pci 0000:3f:05.1: [8086:2ca9] type 0 class 0x000600 [ 0.671025] pci 0000:3f:05.2: [8086:2caa] type 0 class 0x000600 [ 0.671040] pci 0000:3f:05.3: [8086:2cab] type 0 class 0x000600 [ 0.671360] PCI: pci_cache_line_size set to 64 bytes [ 0.671460] reserve RAM buffer: 000000000009e800 - 000000000009ffff [ 0.671462] reserve RAM buffer: 00000000dfe70000 - 00000000dfffffff [ 0.671562] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.671632] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0 [ 0.672053] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.675076] hpet: hpet2 irq 40 for MSI [ 0.675225] hpet: hpet3 irq 41 for MSI [ 0.679236] hpet: hpet4 irq 42 for MSI [ 0.683130] hpet: hpet5 irq 43 for MSI [ 0.683156] Switching to clocksource hpet [ 0.684616] pnp: PnP ACPI init [ 0.684682] ACPI: bus type pnp registered [ 0.684824] pnp 00:00: [bus 00-ff] [ 0.684826] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.684828] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.684831] pnp 00:00: [io 0x0d00-0xffff window] [ 0.684833] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.684835] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.684836] pnp 00:00: [mem 0xe0000000-0xf7ffffff window] [ 0.684838] pnp 00:00: [mem 0xfc000000-0xfed8ffff window] [ 0.684876] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.684885] pnp 00:01: [mem 0xfed14000-0xfed19fff] [ 0.684928] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.684992] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.685020] pnp 00:02: [dma 4] [ 0.685021] pnp 00:02: [io 0x0000-0x000f] [ 0.685023] pnp 00:02: [io 0x0081-0x0083] [ 0.685025] pnp 00:02: [io 0x0087] [ 0.685027] pnp 00:02: [io 0x0089-0x008b] [ 0.685028] pnp 00:02: [io 0x008f] [ 0.685030] pnp 00:02: [io 0x00c0-0x00df] [ 0.685052] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.685061] pnp 00:03: [io 0x0070-0x0071] [ 0.685067] pnp 00:03: [irq 8] [ 0.685088] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.685096] pnp 00:04: [io 0x0061] [ 0.685117] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.685125] pnp 00:05: [io 0x00f0-0x00ff] [ 0.685130] pnp 00:05: [irq 13] [ 0.685150] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.685330] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 0.685332] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 0.685334] pnp 00:06: [io 0x0290-0x029f] [ 0.685380] system 00:06: [io 0x0290-0x029f] has been reserved [ 0.685443] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.685608] pnp 00:07: [io 0x0010-0x001f] [ 0.685609] pnp 00:07: [io 0x0022-0x003f] [ 0.685611] pnp 00:07: [io 0x0044-0x004d] [ 0.685613] pnp 00:07: [io 0x0050-0x005f] [ 0.685614] pnp 00:07: [io 0x0063] [ 0.685616] pnp 00:07: [io 0x0065] [ 0.685617] pnp 00:07: [io 0x0067-0x006f] [ 0.685619] pnp 00:07: [io 0x0072-0x007f] [ 0.685620] pnp 00:07: [io 0x0080] [ 0.685623] pnp 00:07: [io 0x0084-0x0086] [ 0.685624] pnp 00:07: [io 0x0088] [ 0.685626] pnp 00:07: [io 0x008c-0x008e] [ 0.685627] pnp 00:07: [io 0x0090-0x009f] [ 0.685629] pnp 00:07: [io 0x00a2-0x00bf] [ 0.685630] pnp 00:07: [io 0x00e0-0x00ef] [ 0.685632] pnp 00:07: [io 0x04d0-0x04d1] [ 0.685634] pnp 00:07: [io 0x0800-0x087f] [ 0.685635] pnp 00:07: [io 0xffe0-0xffdf disabled] [ 0.685637] pnp 00:07: [io 0x0500-0x057f] [ 0.685638] pnp 00:07: [io 0x0600-0x0607] [ 0.685640] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] [ 0.685642] pnp 00:07: [mem 0xfed20000-0xfed3ffff] [ 0.685644] pnp 00:07: [mem 0xfed40000-0xfed8ffff] [ 0.685707] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.685770] system 00:07: [io 0x0800-0x087f] has been reserved [ 0.685833] system 00:07: [io 0x0500-0x057f] has been reserved [ 0.685897] system 00:07: [io 0x0600-0x0607] has been reserved [ 0.685960] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.686024] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.686088] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.686152] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.686216] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.686241] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.686289] pnp 00:09: [mem 0xffa00000-0xffbfffff] [ 0.686291] pnp 00:09: [mem 0xffe00000-0xffffffff] [ 0.686314] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) [ 0.686352] pnp 00:0a: [mem 0xffc00000-0xffdfffff] [ 0.686398] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.686463] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.686714] pnp 00:0b: [io 0x03f8-0x03ff] [ 0.686719] pnp 00:0b: [irq 4] [ 0.686721] pnp 00:0b: [dma 0 disabled] [ 0.686785] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.686864] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 0.686866] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 0.686913] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.686977] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.687051] Switched to NOHz mode on CPU #0 [ 0.687108] Switched to NOHz mode on CPU #3 [ 0.687142] Switched to NOHz mode on CPU #1 [ 0.687185] Switched to NOHz mode on CPU #2 [ 0.687295] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.687325] pnp 00:0d: [io 0x0060] [ 0.687327] pnp 00:0d: [io 0x0064] [ 0.687332] pnp 00:0d: [irq 1] [ 0.687362] pnp 00:0d: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.687410] pnp 00:0e: [mem 0xf8000000-0xfbffffff] [ 0.687457] system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.687521] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.687691] pnp 00:0f: [mem 0x00000000-0x0009ffff] [ 0.687693] pnp 00:0f: [mem 0x000c0000-0x000cffff] [ 0.687695] pnp 00:0f: [mem 0x000e0000-0x000fffff] [ 0.687696] pnp 00:0f: [mem 0x00100000-0xdfffffff] [ 0.687698] pnp 00:0f: [mem 0xfed90000-0xffffffff] [ 0.687758] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.687823] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.687887] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.687952] system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.688017] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.688082] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.688204] pnp: PnP ACPI: found 16 devices [ 0.688263] ACPI: ACPI bus type pnp unregistered [ 0.694634] PCI: max bus depth: 1 pci_try_num: 2 [ 0.694693] pci 0000:00:1c.3: BAR 14: assigned [mem 0xf4000000-0xf41fffff] [ 0.694758] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.694837] pci 0000:00:1c.3: BAR 13: assigned [io 0x1000-0x1fff] [ 0.694900] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf4400000-0xf45fffff] [ 0.694964] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref] [ 0.695042] pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff] [ 0.695105] pci 0000:00:1c.1: BAR 14: assigned [mem 0xf4800000-0xf49fffff] [ 0.695170] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4a00000-0xf4bfffff 64bit pref] [ 0.695255] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] [ 0.695318] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4c00000-0xf4dfffff] [ 0.695383] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff 64bit pref] [ 0.695462] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.695525] pci 0000:00:03.0: PCI bridge to [bus 01-01] [ 0.695587] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.695650] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf7cfffff] [ 0.695715] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf3ffffff 64bit pref] [ 0.695794] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.695855] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.695919] pci 0000:00:1c.0: bridge window [mem 0xf4c00000-0xf4dfffff] [ 0.695984] pci 0000:00:1c.0: bridge window [mem 0xf5000000-0xf51fffff 64bit pref] [ 0.696064] pci 0000:00:1c.1: PCI bridge to [bus 08-08] [ 0.696126] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.696191] pci 0000:00:1c.1: bridge window [mem 0xf4800000-0xf49fffff] [ 0.696256] pci 0000:00:1c.1: bridge window [mem 0xf4a00000-0xf4bfffff 64bit pref] [ 0.696336] pci 0000:00:1c.2: PCI bridge to [bus 07-07] [ 0.696397] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.696461] pci 0000:00:1c.2: bridge window [mem 0xf4400000-0xf45fffff] [ 0.696526] pci 0000:00:1c.2: bridge window [mem 0xf4600000-0xf47fffff 64bit pref] [ 0.696606] pci 0000:00:1c.3: PCI bridge to [bus 06-06] [ 0.696667] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] [ 0.696732] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf41fffff] [ 0.696796] pci 0000:00:1c.3: bridge window [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.696877] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.696940] pci 0000:00:1c.4: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.697008] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 0.697076] pci 0000:00:1c.6: PCI bridge to [bus 03-03] [ 0.697144] pci 0000:00:1c.7: PCI bridge to [bus 02-02] [ 0.697206] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff] [ 0.697270] pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.697335] pci 0000:00:1c.7: bridge window [mem 0xf4e00000-0xf4efffff 64bit pref] [ 0.697416] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] [ 0.697477] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.697542] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.697607] pci 0000:00:1e.0: bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref] [ 0.697695] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.697760] pci 0000:00:03.0: setting latency timer to 64 [ 0.697765] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.697831] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.697896] pci 0000:00:1c.0: setting latency timer to 64 [ 0.697900] pci 0000:00:1c.1: enabling device (0104 -> 0107) [ 0.697963] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.698028] pci 0000:00:1c.1: setting latency timer to 64 [ 0.698032] pci 0000:00:1c.2: enabling device (0104 -> 0107) [ 0.698099] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.698163] pci 0000:00:1c.2: setting latency timer to 64 [ 0.698168] pci 0000:00:1c.3: enabling device (0104 -> 0107) [ 0.698234] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.698299] pci 0000:00:1c.3: setting latency timer to 64 [ 0.698304] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.698368] pci 0000:00:1c.4: setting latency timer to 64 [ 0.698373] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.698438] pci 0000:00:1c.5: setting latency timer to 64 [ 0.698443] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.698507] pci 0000:00:1c.6: setting latency timer to 64 [ 0.698512] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.698577] pci 0000:00:1c.7: setting latency timer to 64 [ 0.698582] pci 0000:00:1e.0: setting latency timer to 64 [ 0.698585] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.698587] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.698589] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.698591] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.698592] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.698594] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff] [ 0.698596] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.698598] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf7cfffff] [ 0.698600] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf3ffffff 64bit pref] [ 0.698602] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff] [ 0.698603] pci_bus 0000:09: resource 1 [mem 0xf4c00000-0xf4dfffff] [ 0.698605] pci_bus 0000:09: resource 2 [mem 0xf5000000-0xf51fffff 64bit pref] [ 0.698607] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff] [ 0.698609] pci_bus 0000:08: resource 1 [mem 0xf4800000-0xf49fffff] [ 0.698611] pci_bus 0000:08: resource 2 [mem 0xf4a00000-0xf4bfffff 64bit pref] [ 0.698612] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff] [ 0.698614] pci_bus 0000:07: resource 1 [mem 0xf4400000-0xf45fffff] [ 0.698616] pci_bus 0000:07: resource 2 [mem 0xf4600000-0xf47fffff 64bit pref] [ 0.698618] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] [ 0.698619] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf41fffff] [ 0.698621] pci_bus 0000:06: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref] [ 0.698623] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7efffff] [ 0.698625] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.698627] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.698629] pci_bus 0000:02: resource 2 [mem 0xf4e00000-0xf4efffff 64bit pref] [ 0.698630] pci_bus 0000:0a: resource 0 [io 0xe000-0xefff] [ 0.698632] pci_bus 0000:0a: resource 1 [mem 0xf7f00000-0xf7ffffff] [ 0.698634] pci_bus 0000:0a: resource 2 [mem 0xf4f00000-0xf4ffffff 64bit pref] [ 0.698636] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7] [ 0.698638] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff] [ 0.698639] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff] [ 0.698641] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000dffff] [ 0.698643] pci_bus 0000:0a: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.698645] pci_bus 0000:0a: resource 9 [mem 0xfc000000-0xfed8ffff] [ 0.698646] pci_bus 0000:3f: resource 0 [io 0x0000-0xffff] [ 0.698648] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xfffffffff] [ 0.698699] NET: Registered protocol family 2 [ 0.698942] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.699880] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.702258] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.702601] TCP: Hash tables configured (established 524288 bind 65536) [ 0.708425] TCP reno registered [ 0.708495] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.708616] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.708833] NET: Registered protocol family 1 [ 0.708985] pci 0000:01:00.0: Boot video device [ 0.709044] PCI: CLS 32 bytes, default 64 [ 0.709077] Unpacking initramfs... [ 0.924585] Freeing initrd memory: 11780k freed [ 0.926286] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.926353] Placing 64MB software IO TLB between ffff8800dbe66000 - ffff8800dfe66000 [ 0.926430] software IO TLB at phys 0xdbe66000 - 0xdfe66000 [ 0.926936] audit: initializing netlink socket (disabled) [ 0.927010] type=2000 audit(1322994694.676:1): initialized [ 0.949513] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.968322] VFS: Disk quotas dquot_6.5.2 [ 0.968410] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.968530] msgmni has been set to 16002 [ 0.968705] alg: No test for stdrng (krng) [ 0.968789] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.968867] io scheduler noop registered [ 0.968926] io scheduler deadline registered [ 0.968998] io scheduler cfq registered (default) [ 0.969522] intel_idle: MWAIT substates: 0x1120 [ 0.969528] intel_idle: v0.4 model 0x1E [ 0.969529] intel_idle: lapic_timer_reliable_states 0x2 [ 0.969575] ERST: Table is not found! [ 0.969633] GHES: HEST is not enabled! [ 0.969745] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.990141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.130840] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.166437] Linux agpgart interface v0.103 [ 1.166613] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.166677] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.167232] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.167375] mousedev: PS/2 mouse device common for all mice [ 1.167469] rtc_cmos 00:03: RTC can wake from S4 [ 1.167619] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.167704] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.167865] cpuidle: using governor ladder [ 1.168064] cpuidle: using governor menu [ 1.168269] TCP cubic registered [ 1.168326] IPv6: Loaded, but administratively disabled, reboot required to enable [ 1.168403] Mobile IPv6 [ 1.168459] mip6_init: can't add xfrm type(destopt) [ 1.168519] NET: Registered protocol family 17 [ 1.168581] Registering the dns_resolver key type [ 1.169019] PM: Hibernation image not present or could not be loaded. [ 1.169039] registered taskstats version 1 [ 1.177757] rtc_cmos 00:03: setting system clock to 2011-12-04 10:31:35 UTC (1322994695) [ 1.177866] Initializing network drop monitor service [ 1.179362] Freeing unused kernel memory: 556k freed [ 1.179483] Write protecting the kernel read-only data: 6144k [ 1.182974] Freeing unused kernel memory: 788k freed [ 1.185977] Freeing unused kernel memory: 700k freed [ 1.193526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.243609] udevd[62]: starting version 175 [ 1.266851] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.266934] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.267022] r8169 0000:02:00.0: setting latency timer to 64 [ 1.267071] r8169 0000:02:00.0: irq 45 for MSI/MSI-X [ 1.267235] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90000c1c000, e0:cb:4e:25:19:a7, XID 083000c0 IRQ 45 [ 1.268156] SCSI subsystem initialized [ 1.271629] usbcore: registered new interface driver usbfs [ 1.271706] usbcore: registered new interface driver hub [ 1.274514] usbcore: registered new device driver usb [ 1.274877] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.274959] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.275039] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.275042] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.275122] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.275225] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.276470] libata version 3.00 loaded. [ 1.279213] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 1.280563] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5ffe000 [ 1.289250] firewire_ohci 0000:0a:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.293954] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.294042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.294106] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.294183] usb usb1: Product: EHCI Host Controller [ 1.294244] usb usb1: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd [ 1.294306] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.294495] hub 1-0:1.0: USB hub found [ 1.294558] hub 1-0:1.0: 2 ports detected [ 1.294690] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.294765] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.294768] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.294834] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.294933] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.298879] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 1.298893] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5ffd000 [ 1.314148] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.314239] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.314303] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.314380] usb usb2: Product: EHCI Host Controller [ 1.314441] usb usb2: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd [ 1.314502] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.314815] hub 2-0:1.0: USB hub found [ 1.314885] hub 2-0:1.0: 2 ports detected [ 1.315052] ahci 0000:00:1f.2: version 3.0 [ 1.315067] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 1.315165] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 1.315193] ahci: SSS flag set, parallel bus scan disabled [ 1.330135] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.330215] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst [ 1.330297] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.349967] firewire_ohci: Added fw-ohci device 0000:0a:04.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11 [ 1.370510] scsi0 : ahci [ 1.371029] scsi1 : ahci [ 1.371327] scsi2 : ahci [ 1.371597] scsi3 : ahci [ 1.371887] scsi4 : ahci [ 1.372057] scsi5 : ahci [ 1.372244] ata1: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7100 irq 46 [ 1.372322] ata2: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7180 irq 46 [ 1.372401] ata3: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7200 irq 46 [ 1.372480] ata4: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7280 irq 46 [ 1.372559] ata5: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7300 irq 46 [ 1.372638] ata6: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7380 irq 46 [ 1.372730] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.372808] xhci_hcd 0000:05:00.0: setting latency timer to 64 [ 1.372812] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.372878] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 [ 1.373109] xhci_hcd 0000:05:00.0: irq 16, io mem 0xf7efe000 [ 1.373225] xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X [ 1.373230] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X [ 1.373235] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X [ 1.373239] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X [ 1.373245] xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X [ 1.373330] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.373395] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.373472] usb usb3: Product: xHCI Host Controller [ 1.373532] usb usb3: Manufacturer: Linux 3.1.0-1-amd64 xhci_hcd [ 1.373594] usb usb3: SerialNumber: 0000:05:00.0 [ 1.373748] xHCI xhci_add_endpoint called for root hub [ 1.373750] xHCI xhci_check_bandwidth called for root hub [ 1.373784] hub 3-0:1.0: USB hub found [ 1.373849] hub 3-0:1.0: 2 ports detected [ 1.373959] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.374023] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4 [ 1.376442] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.376507] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.376583] usb usb4: Product: xHCI Host Controller [ 1.376644] usb usb4: Manufacturer: Linux 3.1.0-1-amd64 xhci_hcd [ 1.376706] usb usb4: SerialNumber: 0000:05:00.0 [ 1.376878] xHCI xhci_add_endpoint called for root hub [ 1.376880] xHCI xhci_check_bandwidth called for root hub [ 1.376904] hub 4-0:1.0: USB hub found [ 1.376971] hub 4-0:1.0: 2 ports detected [ 1.605393] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 1.737416] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 1.737489] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.737894] hub 1-1:1.0: USB hub found [ 1.738153] hub 1-1:1.0: 6 ports detected [ 1.848932] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 1.849252] firewire_core: created device fw0: GUID 001e8c0000c23e4a, S400 [ 1.860897] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.866788] ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133 [ 1.866861] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.872918] ata1.00: configured for UDMA/133 [ 1.873351] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5 [ 1.920660] Refined TSC clocksource calibration: 2674.967 MHz. [ 1.920732] Switching to clocksource tsc [ 1.980912] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 1.980986] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.981513] hub 2-1:1.0: USB hub found [ 1.981774] hub 2-1:1.0: 8 ports detected [ 2.252088] usb 2-1.7: new high speed USB device number 3 using ehci_hcd [ 2.344159] usb 2-1.7: New USB device found, idVendor=0424, idProduct=2514 [ 2.344233] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.344642] hub 2-1.7:1.0: USB hub found [ 2.344889] hub 2-1.7:1.0: 3 ports detected [ 2.363779] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.369663] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133 [ 2.369736] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.375573] ata2.00: configured for UDMA/133 [ 2.375945] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5 [ 2.615334] usb 2-1.7.1: new high speed USB device number 4 using ehci_hcd [ 2.727351] usb 2-1.7.1: New USB device found, idVendor=0424, idProduct=2640 [ 2.727426] usb 2-1.7.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.727840] hub 2-1.7.1:1.0: USB hub found [ 2.728092] hub 2-1.7.1:1.0: 3 ports detected [ 2.866711] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.869857] ata3.00: ATAPI: PLEXTOR BD-R PX-B940SA, 1.03, max UDMA/100 [ 2.873229] ata3.00: configured for UDMA/100 [ 2.883479] scsi 2:0:0:0: CD-ROM PLEXTOR BD-R PX-B940SA 1.03 PQ: 0 ANSI: 5 [ 2.998546] usb 2-1.7.1.1: new high speed USB device number 5 using ehci_hcd [ 3.137003] usb 2-1.7.1.1: New USB device found, idVendor=0424, idProduct=4060 [ 3.137091] usb 2-1.7.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.137173] usb 2-1.7.1.1: Product: Ultra Fast Media Reader [ 3.137234] usb 2-1.7.1.1: Manufacturer: Generic [ 3.137294] usb 2-1.7.1.1: SerialNumber: 000000264001 [ 3.139671] usbcore: registered new interface driver uas [ 3.201957] ata4: SATA link down (SStatus 0 SControl 300) [ 3.222075] usb 2-1.7.1.2: new low speed USB device number 6 using ehci_hcd [ 3.335461] usb 2-1.7.1.2: New USB device found, idVendor=046d, idProduct=c401 [ 3.335550] usb 2-1.7.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.335632] usb 2-1.7.1.2: Product: USB-PS/2 Trackball [ 3.335692] usb 2-1.7.1.2: Manufacturer: Logitech [ 3.521281] ata5: SATA link down (SStatus 0 SControl 300) [ 3.840603] ata6: SATA link down (SStatus 0 SControl 300) [ 3.841796] Initializing USB Mass Storage driver... [ 3.842060] scsi6 : usb-storage 2-1.7.1.1:1.0 [ 3.842184] usbcore: registered new interface driver usb-storage [ 3.842247] USB Mass Storage support registered. [ 3.843871] input: Logitech USB-PS/2 Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.1/2-1.7.1.2/2-1.7.1.2:1.0/input/input1 [ 3.844092] generic-usb 0003:046D:C401.0001: input,hidraw0: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:1d.0-1.7.1.2/input0 [ 3.844193] usbcore: registered new interface driver usbhid [ 3.844255] usbhid: USB HID core driver [ 3.844266] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.844283] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.844302] sd 0:0:0:0: [sda] Write Protect is off [ 3.844304] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.844318] sd 1:0:0:0: [sdb] Write Protect is off [ 3.844320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.844323] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.844338] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.849117] sdb: sdb1 sdb2 sdb3 sdb4 [ 3.850057] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.861482] sda: sda1 sda2 sda3 sda4 [ 3.862835] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.879420] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.879525] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.879779] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 4.296891] md: raid0 personality registered for level 0 [ 4.298391] md: raid1 personality registered for level 1 [ 4.339910] md: md0 stopped. [ 4.340741] md: bind<sdb2> [ 4.341003] md: bind<sda2> [ 4.342540] bio: create slab <bio-1> at 1 [ 4.342659] md/raid1:md0: active with 2 out of 2 mirrors [ 4.342732] md0: detected capacity change from 0 to 262078464 [ 4.343331] md0: unknown partition table [ 4.346589] md: md1 stopped. [ 4.347178] md: bind<sdb3> [ 4.347348] md: bind<sda3> [ 4.348752] md/raid1:md1: active with 2 out of 2 mirrors [ 4.348826] md1: detected capacity change from 0 to 644245028864 [ 4.349486] md1: unknown partition table [ 4.414623] md: md2 stopped. [ 4.415195] md: bind<sdb4> [ 4.415356] md: bind<sda4> [ 4.417011] md/raid0:md2: looking at sda4 [ 4.417071] md/raid0:md2: comparing sda4(275273600) with sda4(275273600) [ 4.417175] md/raid0:md2: END [ 4.417232] md/raid0:md2: ==> UNIQUE [ 4.417290] md/raid0:md2: 1 zones [ 4.417348] md/raid0:md2: looking at sdb4 [ 4.417407] md/raid0:md2: comparing sdb4(275273600) with sda4(275273600) [ 4.417510] md/raid0:md2: EQUAL [ 4.417604] md/raid0:md2: FINAL 1 zones [ 4.417664] md/raid0:md2: done. [ 4.417721] md/raid0:md2: md_size is 550547200 sectors. [ 4.417782] ******* md2 configuration ********* [ 4.417841] zone0=[sda4/sdb4/] [ 4.418017] zone offset=0kb device offset=0kb size=275273600kb [ 4.418080] ********************************** [ 4.418080] [ 4.418196] md2: detected capacity change from 0 to 281880166400 [ 4.419271] md2: unknown partition table [ 4.421146] device-mapper: uevent: version 1.0.3 [ 4.421431] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 4.724617] Btrfs loaded [ 4.846375] scsi 6:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0 [ 4.846672] scsi: killing requests for dead queue [ 4.846926] scsi: killing requests for dead queue [ 4.847230] scsi: killing requests for dead queue [ 4.847381] scsi: killing requests for dead queue [ 4.847561] scsi: killing requests for dead queue [ 4.847732] scsi: killing requests for dead queue [ 4.847911] scsi: killing requests for dead queue [ 4.848092] scsi: killing requests for dead queue [ 4.859364] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 5.074030] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 6.298681] udevd[406]: starting version 175 [ 6.804787] ACPI: acpi_idle yielding to intel_idle [ 6.811956] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 6.812039] ACPI: Power Button [PWRB] [ 6.812128] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.812206] ACPI: Power Button [PWRF] [ 6.881469] ATK0110 ATK0110:00: EC enabled [ 6.958258] iTCO_vendor_support: vendor-support=0 [ 6.986769] EDAC MC: Ver: 2.1.0 [ 7.013778] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.074679] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 7.074807] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860) [ 7.074945] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.133574] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0 [ 7.133668] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED) [ 7.133752] EDAC i7core: Driver loaded. [ 7.310975] snd_bt87x 0000:0a:02.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.311171] bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 7.417658] nvidia: module license 'NVIDIA' taints kernel. [ 7.510687] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.510760] nvidia 0000:01:00.0: setting latency timer to 64 [ 7.510763] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 7.510925] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011 [ 7.664274] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.664402] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X [ 7.664456] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 7.681203] Linux media interface: v0.10 [ 7.703869] Linux video capture interface: v2.00 [ 7.845806] IR NEC protocol handler initialized [ 7.846381] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.846459] hda_intel: Disabling MSI [ 7.846839] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 7.853937] IR RC5(x) protocol handler initialized [ 7.877946] IR RC6 protocol handler initialized [ 7.884725] bttv: driver version 0.9.19 loaded [ 7.884786] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 7.884873] bttv: Bt8xx card found (0). [ 7.884938] bttv 0000:0a:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.885006] bttv0: Bt878 (rev 2) at 0000:0a:02.0, irq: 17, latency: 64, mmio: 0xf4ffe000 [ 7.885134] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 7.890958] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 7.891041] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init] [ 7.893521] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 7.926354] tveeprom 1-0050: Hauppauge model 61204, rev B1M , serial# 3176099 [ 7.926419] tveeprom 1-0050: tuner model is Philips FI1216 MK2 (idx 8, type 5) [ 7.926496] tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) [ 7.926558] tveeprom 1-0050: audio processor is None (idx 0) [ 7.926620] tveeprom 1-0050: has no radio [ 7.926678] bttv0: Hauppauge eeprom indicates model#61204 [ 7.926739] bttv0: tuner type=5 [ 7.932708] IR JVC protocol handler initialized [ 7.934521] IR Sony protocol handler initialized [ 7.956623] IR MCE Keyboard/mouse protocol handler initialized [ 7.991693] i2c-core: driver [msp3400] using legacy suspend method [ 7.991756] i2c-core: driver [msp3400] using legacy resume method [ 7.991865] lirc_dev: IR Remote Control driver registered, major 249 [ 8.054881] IR LIRC bridge handler initialized [ 8.112196] bttv0: audio absent, no audio device found! [ 8.114223] i2c-core: driver [tuner] using legacy suspend method [ 8.114286] i2c-core: driver [tuner] using legacy resume method [ 8.119104] tuner 1-0061: Tuner -1 found with type(s) Radio TV. [ 8.148272] tuner-simple 1-0061: creating new instance [ 8.148334] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 8.149192] bttv0: registered device video0 [ 8.149378] bttv0: registered device vbi0 [ 8.149464] bttv0: PLL: 28636363 => 35468950 .. ok [ 8.442844] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 8.546727] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 8.650405] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 8.754189] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 8.803066] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input4 [ 8.803374] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input5 [ 8.803653] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input6 [ 8.803935] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input7 [ 9.418975] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 9.627138] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 9.788517] loop: module loaded [ 10.540474] Adding 8388604k swap on /dev/mapper/vg_saturn-swap. Priority:-1 extents:1 across:8388604k [ 11.121746] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 11.185181] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 11.201680] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 11.228765] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 11.833896] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.902794] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 12.548795] Bridge firewalling registered [ 12.557825] device eth0 entered promiscuous mode [ 12.658117] r8169 0000:02:00.0: eth0: link down [ 12.658183] r8169 0000:02:00.0: eth0: link down [ 15.337322] r8169 0000:02:00.0: eth0: link up [ 15.338709] br0: port 1(eth0) entering forwarding state [ 15.338774] br0: port 1(eth0) entering forwarding state [ 21.431339] RPC: Registered named UNIX socket transport module. [ 21.431415] RPC: Registered udp transport module. [ 21.431474] RPC: Registered tcp transport module. [ 21.431534] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 21.501816] FS-Cache: Loaded [ 21.527790] FS-Cache: Netfs 'nfs' registered for caching [ 21.542472] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 22.268720] fuse init (API version 7.17)
--- End Message ---
--- Begin Message ---
- To: 650916-done@bugs.debian.org
- Subject: Re: Bug#650916: linux-image-3.1.0-1-amd64: WARNING in iommu/dmar.c when VT-d is enabled in BIOS
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 04 Dec 2011 14:27:56 +0000
- Message-id: <1323008876.7454.116.camel@deadeye>
- In-reply-to: <[🔎] 20111204104828.4031.15393.reportbug@saturn.home.lan>
- References: <[🔎] 20111204104828.4031.15393.reportbug@saturn.home.lan>
How clear do we have to make it: > [ 0.000000] Your BIOS is broken; DMAR reported at address fed90000 returns all ones! > [ 0.000000] BIOS vendor: American Megatrends Inc.; Ver: 1504 ; Product Version: System Version You need to upgrade the BIOS because VT-d *does not work* in this version. Ben. -- Ben Hutchings Klipstein's 4th Law of Prototyping and Production: A fail-safe circuit will destroy others.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---