Bug#650736: linux-image-3.1.0-1-amd64: Webcam stops other USB devices (ehci_hcd: HC died; cleaning up)
Package: linux-2.6
Version: 3.1.4-1
Severity: normal
Dear Maintainer,
yesterday I decided to get a webcam and got the above mentioned error
with two different uvc-supported models (Logitech C270, MS HD 5000).
I have a HP dc5850 microtower, it has an AMD Phenom II with AMD780
chipset (Radeon 3100 integrated graphics). Each time I plugged the
Logitech C270 into the system, two other USB devices (Samsung
Printer, DLink wireless) stopped working. I only got the other
devices working again through a reboot, simple unloading/reloading
of the modules wouldn't help. Most of the times also the USB mouse
(MS Wireless 5000) would quit (the keyboard is PS/2). I installed
the webcam successfully on Windows 7, but when booting into Linux
the USB devices stopped working.
I returned the Logitech and got a Microsoft HD-5000 webcam
instead. I installed it in Windows 7 and rebooted to Linux. I was
able to make a test call with Skype on Linux and see my test image
there, but when I quit Skype the USB devices stopped working, and
rebooting with the webcam attached didn't help, i had to reboot
again without the webcam.
There is a similar problem described here, but without a solution:
http://lkml.org/lkml/2011/4/25/22
I asked for help on the linux-uvc-devel list: Alexey Fisher
advised me to try older kernel versions and certain USB options. I
tried Debian kernels 2.6.32 and 2.6.38, both would boot with USB
up, but as soon as I accessed the webcam, USB would go down with
similar error messages as current kernels. Setting "echo -1 >
/sys/module/usbcore/parameters/autosuspend" or "echo Y >
/sys/module/usbcore/parameters/old_scheme_first" didn't help
either.
Today I was able to work around this problem by plugging the
camera into the frontside USB ports, before I had been using the
backside ports. Seems to be a different controller, in the log
files it is now usb 2-4 instead of 1-4 or the like.
I am attaching parts of my kern.log. If you need more info, I am
glad to give it...
Thanks for your work!
Michael
Attaching the Logitech C270:
Dec 1 15:55:22 ossietzky kernel: [ 352.973454] usb 1-4: New USB
device found, idVendor=046d, idProduct=0825
Dec 1 15:55:22 ossietzky kernel: [ 352.973465] usb 1-4: New USB
device strings: Mfr=0, Product=0, SerialNumber=2
Dec 1 15:55:22 ossietzky kernel: [ 352.973473] usb 1-4:
SerialNumber: 8D2C8ED0
Dec 1 15:55:23 ossietzky kernel: [ 354.218816] Linux media
interface: v0.10
Dec 1 15:55:23 ossietzky kernel: [ 354.229217] Linux video
capture interface: v2.00
Dec 1 15:55:24 ossietzky kernel: [ 355.264233] 5:3:3: cannot get
freq at ep 0x86
Dec 1 15:55:24 ossietzky kernel: [ 355.403959] usbcore:
registered new interface driver snd-usb-audio
Dec 1 15:55:24 ossietzky kernel: [ 355.403999] uvcvideo: Found
UVC 1.00 device <unnamed> (046d:0825)
Dec 1 15:55:24 ossietzky kernel: [ 355.419004] input: UVC Camera
(046d:0825) as
/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input9
Dec 1 15:55:24 ossietzky kernel: [ 355.419162] usbcore:
registered new interface driver uvcvideo
Dec 1 15:55:24 ossietzky kernel: [ 355.419168] USB Video Class
driver (1.1.1)
Dec 1 15:55:24 ossietzky kernel: [ 355.610354] ehci_hcd
0000:00:12.2: force halt; handshake ffffc90000326424 00004000
00000000 -> -110
Dec 1 15:55:24 ossietzky kernel: [ 355.610366] ehci_hcd
0000:00:12.2: HC died; cleaning up
Dec 1 15:55:24 ossietzky kernel: [ 355.610430] usb 1-2: USB
disconnect, device number 3
Dec 1 15:55:24 ossietzky kernel: [ 355.610894] wlan0:
deauthenticating from 00:c0:02:1a:80:bc by local choice (reason=3)
Dec 1 15:55:24 ossietzky kernel: [ 355.732203] cfg80211: Calling
CRDA to update world regulatory domain
Dec 1 15:55:26 ossietzky kernel: [ 357.152254] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.152370] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.152445] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.152488] usb 1-3: USB
disconnect, device number 4
Dec 1 15:55:26 ossietzky kernel: [ 357.152857] usb 1-4: USB
disconnect, device number 5
Dec 1 15:55:26 ossietzky kernel: [ 357.153172] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.153865] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.154647] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.154687] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.154751] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.155342] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.155978] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.156948] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.157033] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.157274] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.158023] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.158847] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.160317] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.160404] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.160666] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.161445] 5:3:4:
usb_set_interface failed
Dec 1 15:55:26 ossietzky kernel: [ 357.162302] 5:3:4:
usb_set_interface failed
Etc.
Microsoft HD-5000 loads successfully, turns bad:
Dec 1 16:57:47 ossietzky kernel: [ 1459.700093] usb 1-5: new high
speed USB device number 5 using ehci_hcd
Dec 1 16:57:47 ossietzky kernel: [ 1459.848657] usb 1-5: New USB
device found, idVendor=045e, idProduct=076d
Dec 1 16:57:47 ossietzky kernel: [ 1459.848661] usb 1-5: New USB
device strings: Mfr=1, Product=2, SerialNumber=0
Dec 1 16:57:47 ossietzky kernel: [ 1459.848664] usb 1-5: Product:
Microsoft® LifeCam HD-5000
Dec 1 16:57:47 ossietzky kernel: [ 1459.848666] usb 1-5:
Manufacturer: Microsoft
Dec 1 16:57:48 ossietzky kernel: [ 1460.465318] Linux media
interface: v0.10
Dec 1 16:57:48 ossietzky kernel: [ 1460.476086] Linux video
capture interface: v2.00
Dec 1 16:57:49 ossietzky kernel: [ 1461.584177] 5:3:1: cannot get
freq at ep 0x82
Dec 1 16:57:49 ossietzky kernel: [ 1461.587036] usbcore:
registered new interface driver snd-usb-audio
Dec 1 16:57:49 ossietzky kernel: [ 1461.587042] uvcvideo: Found
UVC 1.00 device Microsoft® LifeCam HD-5000 (045e:076d)
Dec 1 16:57:49 ossietzky kernel: [ 1461.592307] input: Microsoft®
LifeCam HD-5000 as
/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input9
Dec 1 16:57:49 ossietzky kernel: [ 1461.592388] usbcore:
registered new interface driver uvcvideo
Dec 1 16:57:49 ossietzky kernel: [ 1461.592390] USB Video Class
driver (1.1.1)
Dec 1 16:57:50 ossietzky kernel: [ 1462.784195] 5:3:1: cannot get
freq at ep 0x82
Dec 1 16:57:51 ossietzky kernel: [ 1463.908198] 5:3:1: cannot get
freq at ep 0x82
...
Dec 1 17:00:02 ossietzky kernel: [ 1594.705830] wlan0: associate
with 00:c0:02:1a:80:bc (try 1)
Dec 1 17:00:02 ossietzky kernel: [ 1594.708637] wlan0: RX
AssocResp from 00:c0:02:1a:80:bc (capab=0x471 status=0 aid=3)
Dec 1 17:00:02 ossietzky kernel: [ 1594.708641] wlan0: associated
Dec 1 17:00:02 ossietzky kernel: [ 1594.721821]
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Dec 1 17:00:13 ossietzky kernel: [ 1605.728012] wlan0: no IPv6
routers present
Dec 1 17:00:25 ossietzky kernel: [ 1617.612006] ehci_hcd
0000:00:12.2: force halt; handshake ffffc90000326424 00004000
00000000 -> -110
Dec 1 17:00:25 ossietzky kernel: [ 1617.612006] ehci_hcd
0000:00:12.2: HC died; cleaning up
Dec 1 17:00:25 ossietzky kernel: [ 1617.612284] usb 1-2: USB
disconnect, device number 6
Dec 1 17:00:25 ossietzky kernel: [ 1617.628461] wlan0:
deauthenticating from 00:c0:02:1a:80:bc by local choice (reason=3)
Dec 1 17:00:25 ossietzky kernel: [ 1617.680162] cfg80211: Calling
CRDA to update world regulatory domain
Dec 1 17:00:26 ossietzky kernel: [ 1619.080244] usb 1-3: USB
disconnect, device number 4
Dec 1 17:00:26 ossietzky kernel: [ 1619.080377] usb 1-5: USB
disconnect, device number 5
-- Package-specific info:
** Version:
Linux version 3.1.0-1-amd64 (Debian 3.1.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-5) ) #1 SMP Tue Nov 29 13:47:12 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=66e75d80-ed82-400a-9c84-397b29fef7ce ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 6.542504] [drm] pitch is 4608
[ 6.542584] fbcon: radeondrmfb (fb0) is primary device
[ 6.568759] Console: switching to colour frame buffer device 144x54
[ 6.577371] fb0: radeondrmfb frame buffer device
[ 6.577373] drm: registered panic notifier
[ 6.577379] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:05.0 on minor 0
[ 6.603470] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 6.606476] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 6.609463] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 6.612465] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro/HG 1.00 PQ: 0 ANSI: 0 CCS
[ 6.615460] scsi 4:0:0:4: Direct-Access Generic- SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 0 CCS
[ 6.615490] scsi: killing requests for dead queue
[ 6.615528] scsi: killing requests for dead queue
[ 6.615558] scsi: killing requests for dead queue
[ 6.615587] scsi: killing requests for dead queue
[ 6.615616] scsi: killing requests for dead queue
[ 6.615645] scsi: killing requests for dead queue
[ 6.615674] scsi: killing requests for dead queue
[ 6.615703] scsi: killing requests for dead queue
[ 6.680321] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 6.687940] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 6.713074] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 6.715565] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 6.720567] sd 4:0:0:4: [sdf] Attached SCSI removable disk
[ 6.812516] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
[ 6.867015] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.867437] Registered led device: rt73usb-phy0::radio
[ 6.867452] Registered led device: rt73usb-phy0::assoc
[ 6.867466] Registered led device: rt73usb-phy0::quality
[ 6.868170] usbcore: registered new interface driver rt73usb
[ 8.038433] Adding 3004148k swap on /dev/sda2. Priority:-1 extents:1 across:3004148k
[ 8.333928] EXT3-fs (sda4): using internal journal
[ 8.571040] loop: module loaded
[ 8.590124] smsc47b397: found SMSC SCH5317 (base address 0x0880, revision 1)
[ 12.948663] fuse init (API version 7.17)
[ 13.384597] kjournald starting. Commit interval 5 seconds
[ 13.384819] EXT3-fs (dm-3): using internal journal
[ 13.384823] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 13.446185] kjournald starting. Commit interval 5 seconds
[ 13.446429] EXT3-fs (dm-2): using internal journal
[ 13.446433] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 13.649802] kjournald starting. Commit interval 5 seconds
[ 13.650065] EXT3-fs (dm-0): using internal journal
[ 13.650068] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 13.699924] kjournald starting. Commit interval 5 seconds
[ 13.700183] EXT3-fs (dm-1): using internal journal
[ 13.700186] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 20.818970] Disabling lock debugging due to kernel taint
[ 20.823635] vboxdrv: Found 4 processor cores.
[ 20.823937] vboxdrv: fAsync=0 offMin=0x31f offMax=0x1977
[ 20.824031] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 20.824033] vboxdrv: Successfully loaded version 4.1.6_Debian (interface 0x00190000).
[ 21.850197] vboxpci: IOMMU not found (not registered)
[ 26.400560] tg3 0000:3f:00.0: irq 41 for MSI/MSI-X
[ 26.448328] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.855786] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.916023] wlan0: authenticate with 00:c0:02:1a:80:bc (try 1)
[ 30.917777] wlan0: authenticated
[ 30.973258] wlan0: associate with 00:c0:02:1a:80:bc (try 1)
[ 30.975888] wlan0: RX AssocResp from 00:c0:02:1a:80:bc (capab=0x471 status=0 aid=4)
[ 30.975891] wlan0: associated
[ 30.988059] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 41.444102] Bluetooth: Core ver 2.16
[ 41.444124] NET: Registered protocol family 31
[ 41.444126] Bluetooth: HCI device and connection manager initialized
[ 41.444129] Bluetooth: HCI socket layer initialized
[ 41.444130] Bluetooth: L2CAP socket layer initialized
[ 41.444135] Bluetooth: SCO socket layer initialized
[ 41.458206] Bluetooth: RFCOMM TTY layer initialized
[ 41.458210] Bluetooth: RFCOMM socket layer initialized
[ 41.458212] Bluetooth: RFCOMM ver 1.11
[ 41.549036] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 41.549039] Bluetooth: BNEP filters: protocol multicast
[ 41.632016] wlan0: no IPv6 routers present
[ 46.633444] lp: driver loaded but no devices found
[ 46.639368] ppdev: user-space parallel port driver
[ 72.194693] powernow-k8: Found 1 AMD Phenom(tm) II X4 810 Processor (4 cpu cores) (version 2.20.00)
[ 72.194735] powernow-k8: 0 : pstate 0 (2600 MHz)
[ 72.194737] powernow-k8: 1 : pstate 1 (1900 MHz)
[ 72.194739] powernow-k8: 2 : pstate 2 (1400 MHz)
[ 72.194741] powernow-k8: 3 : pstate 3 (800 MHz)
[ 76.214148] Did not find alt setting 1 for intf 0, config 1
[ 175.600541] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 232.053230] evolution[3994]: segfault at 21 ip 00007fdea70cfe58 sp 00007fff6d0c1fa0 error 4 in libcamel-1.2.so.23.0.0[7fdea7084000+73000]
[ 834.512062] usb 2-4: new high speed USB device number 3 using ehci_hcd
[ 834.661116] usb 2-4: New USB device found, idVendor=045e, idProduct=076d
[ 834.661126] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 834.661135] usb 2-4: Product: Microsoft® LifeCam HD-5000
[ 834.661141] usb 2-4: Manufacturer: Microsoft
[ 835.266496] Linux media interface: v0.10
[ 835.272650] Linux video capture interface: v2.00
[ 836.376145] 3:3:1: cannot get freq at ep 0x82
[ 836.378923] usbcore: registered new interface driver snd-usb-audio
[ 836.378960] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-5000 (045e:076d)
[ 836.387344] input: Microsoft® LifeCam HD-5000 as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input9
[ 836.387552] usbcore: registered new interface driver uvcvideo
[ 836.387558] USB Video Class driver (1.1.1)
[ 837.656136] 3:3:1: cannot get freq at ep 0x82
[ 838.800142] 3:3:1: cannot get freq at ep 0x82
[ 1023.272167] 3:3:1: cannot get freq at ep 0x82
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Compaq dc5850 Microtower
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 786F6 v03.10
board_vendor: Hewlett-Packard
board_name: 3029h
board_version:
** Loaded modules:
uvcvideo
videodev
media
v4l2_compat_ioctl32
snd_usb_audio
snd_usbmidi_lib
powernow_k8
mperf
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
crc16
pci_stub
vboxpci (O)
vboxnetadp (O)
vboxnetflt (O)
vboxdrv (O)
binfmt_misc
fuse
smsc47b397
loop
dm_crypt
arc4
snd_hda_codec_analog
tpm_infineon
joydev
rt73usb
crc_itu_t
snd_hda_intel
snd_hda_codec
rt2x00usb
rt2x00lib
snd_hwdep
snd_pcm_oss
snd_mixer_oss
usbhid
snd_pcm
snd_seq_midi
hid
mac80211
radeon
cfg80211
snd_rawmidi
snd_seq_midi_event
snd_seq
snd_timer
usb_storage
uas
ttm
drm_kms_helper
drm
snd_seq_device
edac_core
i2c_algo_bit
power_supply
snd
tpm_tis
shpchp
tpm
tpm_bios
edac_mce_amd
soundcore
hp_wmi
psmouse
sparse_keymap
snd_page_alloc
sp5100_tco
rfkill
pcspkr
i2c_piix4
i2c_core
processor
pci_hotplug
k10temp
evdev
serio_raw
wmi
thermal_sys
button
ext3
jbd
mbcache
dm_mod
sr_mod
sd_mod
cdrom
crc_t10dif
ohci_hcd
floppy
ahci
libahci
ehci_hcd
tg3
libphy
libata
scsi_mod
usbcore
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:24:21:7b:ce:ac brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:24:01:9c:32:23 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.3/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::224:1ff:fe9c:3223/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 413537 3533 0 0 0 0 0 0 413537 3533 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 6947059 15251 0 0 0 0 0 0 2582651 15780 0 0 0 0 0 0
*** Protocol statistics:
Ip:
16849 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
16825 incoming packets delivered
18678 requests sent out
196 dropped because of missing route
44 reassemblies required
22 packets reassembled ok
Icmp:
60 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 60
73 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 73
IcmpMsg:
InType3: 60
OutType3: 73
Tcp:
649 active connections openings
37 passive connection openings
27 failed connection attempts
129 connection resets received
10 connections established
8700 segments received
9791 segments send out
387 segments retransmited
0 bad segments received.
595 resets sent
Udp:
8080 packets received
73 packets to unknown port received.
0 packet receive errors
8639 packets sent
UdpLite:
TcpExt:
4 packets pruned from receive queue because of socket buffer overrun
166 TCP sockets finished time wait in fast timer
578 delayed acks sent
Quick ack mode was activated 36 times
361 packets directly queued to recvmsg prequeue.
1699 bytes directly in process context from backlog
24498 bytes directly received in process context from prequeue
3440 packet headers predicted
77 packets header predicted and directly queued to user
941 acknowledgments not containing data payload received
807 predicted acknowledgments
8 congestion windows recovered without slow start by DSACK
148 congestion windows recovered without slow start after partial ack
2 timeouts after SACK recovery
225 other TCP timeouts
60 packets collapsed in receive queue due to low socket buffer
37 DSACKs sent for old packets
49 DSACKs received
185 connections reset due to unexpected data
128 connections reset due to early user close
17 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 16
TCPSackShiftFallback: 17
IpExt:
InMcastPkts: 56
OutMcastPkts: 45
InBcastPkts: 349
OutBcastPkts: 248
InOctets: 7028822
OutOctets: 2400730
InMcastOctets: 13995
OutMcastOctets: 6016
InBcastOctets: 77637
OutBcastOctets: 37965
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR+ <PERR- INTx-
Latency: 32
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Hewlett-Packard Company Device [103c:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0000000-f01fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
Memory behind bridge: f0200000-f02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 2100 [size=16]
Region 5: Memory at f0308000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0304000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0305000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0308400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0306000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0307000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f0308500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a)
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon 3100 Graphics [1002:9611] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 1100 [size=256]
Region 2: Memory at f0100000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at f0000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express [14e4:167a] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3029]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04e8:342c Samsung Electronics Co., Ltd
Bus 001 Device 004: ID 07d1:3c03 D-Link System AirPlus G DWL-G122 Wireless Adapter(rev.C1) [Ralink RT73]
Bus 002 Device 002: ID 0bda:0181 Realtek Semiconductor Corp.
Bus 003 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 003: ID 045e:076d Microsoft Corp. LifeCam HD-5000
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (900, 'testing'), (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'stable'), (10, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.1.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.1.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.1.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.1.0-1-amd64 suggests:
ii grub-pc 1.99-14
ii linux-doc-3.1 3.1.1-1
Versions of packages linux-image-3.1.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux 0.34
pn firmware-linux-nonfree 0.34
pn firmware-qlogic <none>
pn firmware-ralink 0.34
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false
linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true
linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64:
Reply to: