--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-38
Severity: normal
Hello
Errors like this are reported on boot.
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
I don't see anything wrong with the system but either it's harmless and
should not be reported as error or there is some actual issue which does
not happen to manifest currently.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 12:46:30 UTC 2011
** Command line:
placeholder root=UUID=67bb37ba-c020-445d-8e73-7f4dc130f16b ro quiet quiet
** Not tainted
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 12:46:30 UTC 2011
[ 0.000000] Command line: placeholder root=UUID=67bb37ba-c020-445d-8e73-7f4dc130f16b ro quiet quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn d0000-f3b1d: 146205 pages freed
[ 0.000000] released 146205 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] Xen: 000000000008f000 - 0000000000090000 (reserved)
[ 0.000000] Xen: 0000000000090000 - 000000000009ec00 (usable)
[ 0.000000] Xen: 000000000009ec00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000cee98000 (usable)
[ 0.000000] Xen: 00000000cee98000 - 00000000ceebf000 (reserved)
[ 0.000000] Xen: 00000000ceebf000 - 00000000cef41000 (usable)
[ 0.000000] Xen: 00000000cef41000 - 00000000cefbf000 (ACPI NVS)
[ 0.000000] Xen: 00000000cefbf000 - 00000000ceff1000 (usable)
[ 0.000000] Xen: 00000000ceff1000 - 00000000cefff000 (ACPI data)
[ 0.000000] Xen: 00000000cefff000 - 00000000cf000000 (usable)
[ 0.000000] Xen: 00000000cf000000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0xcf000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf000000
[ 0.000000] 0000000000 - 00cf000000 page 4k
[ 0.000000] kernel direct mapping tables up to cf000000 @ 100000-77d000
[ 0.000000] RAMDISK: 016ba000 - 0309e600
[ 0.000000] ACPI: RSDP 00000000000f2060 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 00000000ceffe120 0004C (v01 INTEL D525MW 00000053 01000013)
[ 0.000000] ACPI: FACP 00000000ceffd000 000F4 (v03 INTEL D525MW 00000053 MSFT 0100000D)
[ 0.000000] ACPI: DSDT 00000000ceff9000 03796 (v01 INTEL D525MW 00000053 MSFT 0100000D)
[ 0.000000] ACPI: FACS 00000000cef87000 00040
[ 0.000000] ACPI: APIC 00000000ceff8000 00084 (v02 INTEL D525MW 00000053 MSFT 0100000D)
[ 0.000000] ACPI: MCFG 00000000ceff7000 0003C (v01 INTEL D525MW 00000053 MSFT 0100000D)
[ 0.000000] ACPI: HPET 00000000ceff6000 00038 (v01 INTEL D525MW 00000053 MSFT 0100000D)
[ 0.000000] ACPI: SSDT 00000000ceff2000 0377C (v01 INTEL D525MW 00000053 MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000cf000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000cf000000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 0000000000029dff] pages 1a
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00cf000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [000383e000 - 000385f000] XEN PAGETABLES ==> [000383e000 - 000385f000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 00016999d4] TEXT DATA BSS ==> [0001000000 - 00016999d4]
[ 0.000000] #4 [00016ba000 - 000309e600] RAMDISK ==> [00016ba000 - 000309e600]
[ 0.000000] #5 [000309f000 - 000383e000] XEN START INFO ==> [000309f000 - 000383e000]
[ 0.000000] #6 [000169a000 - 000169a19e] BRK ==> [000169a000 - 000169a19e]
[ 0.000000] #7 [0000100000 - 0000759000] PGTABLE ==> [0000100000 - 0000759000]
[ 0.000000] found SMP MP-table at [ffff8800000fbe50] fbe50
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000008f
[ 0.000000] 0: 0x00000090 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cee98
[ 0.000000] 0: 0x000ceebf -> 0x000cef41
[ 0.000000] 0: 0x000cefbf -> 0x000ceff1
[ 0.000000] 0: 0x000cefff -> 0x000cf000
[ 0.000000] On node 0 totalpages: 847594
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1628 pages reserved
[ 0.000000] DMA zone: 2313 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11536 pages used for memmap
[ 0.000000] DMA32 zone: 832061 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cee98000 - 00000000ceebf000
[ 0.000000] PM: Registered nosave memory: 00000000cef41000 - 00000000cefbf000
[ 0.000000] PM: Registered nosave memory: 00000000ceff1000 - 00000000cefff000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880003895000 s90328 r8192 d24360 u122880
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] trying to map vcpu_info 0 at ffff8800038a0020, mfn 12b8a0, offset 32
[ 0.000000] cpu 0 using vcpu_info at ffff8800038a0020
[ 0.000000] trying to map vcpu_info 1 at ffff8800038be020, mfn 12b8be, offset 32
[ 0.000000] cpu 1 using vcpu_info at ffff8800038be020
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 834374
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: placeholder root=UUID=67bb37ba-c020-445d-8e73-7f4dc130f16b ro quiet quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff8800069f9000 - ffff88000a9f9000
[ 0.000000] DMA: software IO TLB at phys 0x69f9000 - 0xa9f9000
[ 0.000000] xen_swiotlb_fixup: buf=ffff8800069f9000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff88000aa59000 size=32768
[ 0.000000] Memory: 3229456k/3391488k available (3149k kernel code, 1112k absent, 160920k reserved, 1906k data, 604k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:768
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] alloc irq_desc for 767 on node -1
[ 0.000000] alloc kstat_irqs on node -1
[ 0.000000] Detected 1800.136 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.27 BogoMIPS (lpj=7200544)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006522] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008086] Mount-cache hash table entries: 256
[ 0.008408] Initializing cgroup subsys ns
[ 0.008418] Initializing cgroup subsys cpuacct
[ 0.008430] Initializing cgroup subsys devices
[ 0.008437] Initializing cgroup subsys freezer
[ 0.008443] Initializing cgroup subsys net_cls
[ 0.008519] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008527] CPU: L2 cache: 512K
[ 0.008536] CPU 0/0x0 -> Node 0
[ 0.008542] CPU: Unsupported number of siblings 4
[ 0.008552] mce: CPU supports 5 MCE banks
[ 0.008584] Performance Events: unsupported p6 CPU model 28 no PMU driver, software events only.
[ 0.008611] SMP alternatives: switching to UP code
[ 0.016000] ACPI: Core revision 20090903
[ 0.036165] alloc irq_desc for 766 on node -1
[ 0.036172] alloc kstat_irqs on node -1
[ 0.036193] alloc irq_desc for 765 on node -1
[ 0.036198] alloc kstat_irqs on node -1
[ 0.036212] alloc irq_desc for 764 on node -1
[ 0.036218] alloc kstat_irqs on node -1
[ 0.036230] alloc irq_desc for 763 on node -1
[ 0.036235] alloc kstat_irqs on node -1
[ 0.036719] installing Xen timer for CPU 1
[ 0.036734] alloc irq_desc for 762 on node -1
[ 0.036740] alloc kstat_irqs on node -1
[ 0.036807] SMP alternatives: switching to SMP code
[ 0.040001] alloc irq_desc for 761 on node -1
[ 0.040001] alloc kstat_irqs on node -1
[ 0.040031] alloc irq_desc for 760 on node -1
[ 0.040037] alloc kstat_irqs on node -1
[ 0.040052] alloc irq_desc for 759 on node -1
[ 0.040057] alloc kstat_irqs on node -1
[ 0.040070] alloc irq_desc for 758 on node -1
[ 0.040076] alloc kstat_irqs on node -1
[ 0.004000] Initializing CPU#1
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU 1/0x0 -> Node 0
[ 0.004000] CPU: Unsupported number of siblings 4
[ 0.040329] Brought up 2 CPUs
[ 0.040390] CPU0 attaching sched-domain:
[ 0.040398] domain 0: span 0-1 level CPU
[ 0.040406] groups: 0 1
[ 0.040424] CPU1 attaching sched-domain:
[ 0.040430] domain 0: span 0-1 level CPU
[ 0.040437] groups: 1 0
[ 0.040623] devtmpfs: initialized
[ 0.045690] Grant table initialized
[ 0.045690] regulator: core version 0.5
[ 0.045690] NET: Registered protocol family 16
[ 0.045690] alloc irq_desc for 757 on node -1
[ 0.045690] alloc kstat_irqs on node -1
[ 0.045690] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.045690] ACPI: bus type pci registered
[ 0.045690] sync cpu 0 get result 1 max_id 1
[ 0.045690] sync cpu 1 get result 1 max_id 1
[ 0.045690] alloc irq_desc for 756 on node -1
[ 0.045690] alloc kstat_irqs on node -1
[ 0.045690] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.045690] PCI: MCFG area at f8000000 reserved in E820
[ 0.077204] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.077211] PCI: Using configuration type 1 for base access
[ 0.078515] bio: create slab <bio-0> at 0
[ 0.082125] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.082234] ACPI: EC: Look up EC in DSDT
[ 0.106147] ACPI: BIOS _OSI(Linux) query ignored
[ 0.107745] ACPI: Interpreter enabled
[ 0.107754] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.107852] ACPI: Using IOAPIC for interrupt routing
[ 0.121658] ACPI: No dock devices found.
[ 0.122177] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.122508] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0300000-0xf037ffff]
[ 0.122527] pci 0000:00:02.0: reg 14 io port: [0x30c0-0x30c7]
[ 0.122545] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.122563] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0200000-0xf02fffff]
[ 0.122866] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0380000-0xf0383fff]
[ 0.123015] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.123028] pci 0000:00:1b.0: PME# disabled
[ 0.123260] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.123274] pci 0000:00:1c.0: PME# disabled
[ 0.123502] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.123516] pci 0000:00:1c.1: PME# disabled
[ 0.123745] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.123759] pci 0000:00:1c.2: PME# disabled
[ 0.123987] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.124001] pci 0000:00:1c.3: PME# disabled
[ 0.124001] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f]
[ 0.124001] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
[ 0.124001] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
[ 0.124142] pci 0000:00:1d.3: reg 20 io port: [0x3020-0x303f]
[ 0.124320] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0384400-0xf03847ff]
[ 0.124479] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.124493] pci 0000:00:1d.7: PME# disabled
[ 0.124876] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.125047] pci 0000:00:1f.2: reg 10 io port: [0x30b8-0x30bf]
[ 0.125069] pci 0000:00:1f.2: reg 14 io port: [0x30cc-0x30cf]
[ 0.125090] pci 0000:00:1f.2: reg 18 io port: [0x30b0-0x30b7]
[ 0.125111] pci 0000:00:1f.2: reg 1c io port: [0x30c8-0x30cb]
[ 0.125132] pci 0000:00:1f.2: reg 20 io port: [0x30a0-0x30af]
[ 0.125152] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0384000-0xf03843ff]
[ 0.125246] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.125259] pci 0000:00:1f.2: PME# disabled
[ 0.125396] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
[ 0.125592] pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.125647] pci 0000:01:00.0: reg 18 64bit mmio pref: [0xf0004000-0xf0004fff]
[ 0.125686] pci 0000:01:00.0: reg 20 64bit mmio pref: [0xf0000000-0xf0003fff]
[ 0.125813] pci 0000:01:00.0: supports D1 D2
[ 0.125819] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125833] pci 0000:01:00.0: PME# disabled
[ 0.126053] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.126081] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf00fffff]
[ 0.126657] pci 0000:05:00.0: reg 10 io port: [0x1000-0x10ff]
[ 0.126679] pci 0000:05:00.0: reg 14 32bit mmio: [0xf0100000-0xf01000ff]
[ 0.126806] pci 0000:05:00.0: supports D1 D2
[ 0.126812] pci 0000:05:00.0: PME# supported from D1 D2 D3hot
[ 0.126825] pci 0000:05:00.0: PME# disabled
[ 0.126975] pci 0000:00:1e.0: transparent bridge
[ 0.126988] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
[ 0.127001] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[ 0.127106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.127765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.128179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.128435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.128682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.128929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.145875] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.146195] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.146522] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.146835] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.147148] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.147459] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.147784] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.148113] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.148328] xen_balloon: Initialising balloon driver with page order 0.
[ 0.148496] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.148529] vgaarb: loaded
[ 0.148653] PCI: Using ACPI for IRQ routing
[ 0.148653] Switching to clocksource xen
[ 0.151693] pnp: PnP ACPI init
[ 0.151742] ACPI: bus type pnp registered
[ 0.153518] xen: registering gsi 8 triggering 1 polarity 0
[ 0.153527] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.153532] xen: --> irq=8
[ 0.153655] xen: registering gsi 13 triggering 1 polarity 0
[ 0.153662] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.153667] xen: --> irq=13
[ 0.155047] xen: registering gsi 7 triggering 1 polarity 0
[ 0.155054] xen_allocate_pirq: returning irq 7 for gsi 7
[ 0.155060] xen: --> irq=7
[ 0.156068] xen: registering gsi 4 triggering 1 polarity 0
[ 0.156076] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.156082] xen: --> irq=4
[ 0.156916] xen: registering gsi 3 triggering 1 polarity 0
[ 0.156923] xen_allocate_pirq: returning irq 3 for gsi 3
[ 0.156928] xen: --> irq=3
[ 0.157657] pnp: PnP ACPI: found 13 devices
[ 0.157663] ACPI: ACPI bus type pnp unregistered
[ 0.157691] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.157700] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.157709] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.157718] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.157727] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.157736] system 00:01: iomem range 0xc0000-0xdffff could not be reserved
[ 0.157746] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.157755] system 00:01: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.157776] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.157785] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.157793] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.157802] system 00:06: ioport range 0x295-0x296 has been reserved
[ 0.166663] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.166871] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.166883] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.166900] pci 0000:00:1c.0: MEM window: 0xd0000000-0xd03fffff
[ 0.166914] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f00fffff
[ 0.166935] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.166945] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.166962] pci 0000:00:1c.1: MEM window: 0xd0400000-0xd05fffff
[ 0.166976] pci 0000:00:1c.1: PREFETCH window: 0x000000d0600000-0x000000d07fffff
[ 0.166997] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.167007] pci 0000:00:1c.2: IO window: 0x5000-0x5fff
[ 0.167024] pci 0000:00:1c.2: MEM window: 0xd0800000-0xd09fffff
[ 0.167037] pci 0000:00:1c.2: PREFETCH window: 0x000000d0a00000-0x000000d0bfffff
[ 0.167057] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[ 0.167068] pci 0000:00:1c.3: IO window: 0x6000-0x6fff
[ 0.167084] pci 0000:00:1c.3: MEM window: 0xd0c00000-0xd0dfffff
[ 0.167097] pci 0000:00:1c.3: PREFETCH window: 0x000000d0e00000-0x000000d0ffffff
[ 0.167118] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.167128] pci 0000:00:1e.0: IO window: 0x1000-0x1fff
[ 0.167144] pci 0000:00:1e.0: MEM window: 0xf0100000-0xf01fffff
[ 0.167157] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.167202] xen: registering gsi 17 triggering 0 polarity 1
[ 0.167214] alloc irq_desc for 17 on node -1
[ 0.167221] alloc kstat_irqs on node -1
[ 0.167233] xen: --> irq=17
[ 0.167250] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.167266] pci 0000:00:1c.0: setting latency timer to 64
[ 0.167295] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.167305] xen: registering gsi 16 triggering 0 polarity 1
[ 0.167316] alloc irq_desc for 16 on node -1
[ 0.167322] alloc kstat_irqs on node -1
[ 0.167330] xen: --> irq=16
[ 0.167341] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.167359] pci 0000:00:1c.1: setting latency timer to 64
[ 0.167387] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[ 0.167397] xen: registering gsi 18 triggering 0 polarity 1
[ 0.167408] alloc irq_desc for 18 on node -1
[ 0.167413] alloc kstat_irqs on node -1
[ 0.167421] xen: --> irq=18
[ 0.167431] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.167449] pci 0000:00:1c.2: setting latency timer to 64
[ 0.167477] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.167488] xen: registering gsi 19 triggering 0 polarity 1
[ 0.167498] alloc irq_desc for 19 on node -1
[ 0.167504] alloc kstat_irqs on node -1
[ 0.167512] xen: --> irq=19
[ 0.167522] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.167540] pci 0000:00:1c.3: setting latency timer to 64
[ 0.167565] pci 0000:00:1e.0: setting latency timer to 64
[ 0.167577] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.167585] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.167592] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.167600] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd03fffff]
[ 0.167607] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf00fffff]
[ 0.167614] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
[ 0.167621] pci_bus 0000:02: resource 1 mem: [0xd0400000-0xd05fffff]
[ 0.167628] pci_bus 0000:02: resource 2 pref mem [0xd0600000-0xd07fffff]
[ 0.167636] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
[ 0.167643] pci_bus 0000:03: resource 1 mem: [0xd0800000-0xd09fffff]
[ 0.167650] pci_bus 0000:03: resource 2 pref mem [0xd0a00000-0xd0bfffff]
[ 0.167657] pci_bus 0000:04: resource 0 io: [0x6000-0x6fff]
[ 0.167664] pci_bus 0000:04: resource 1 mem: [0xd0c00000-0xd0dfffff]
[ 0.167671] pci_bus 0000:04: resource 2 pref mem [0xd0e00000-0xd0ffffff]
[ 0.167679] pci_bus 0000:05: resource 0 io: [0x1000-0x1fff]
[ 0.167686] pci_bus 0000:05: resource 1 mem: [0xf0100000-0xf01fffff]
[ 0.167693] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.167700] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.167785] NET: Registered protocol family 2
[ 0.168516] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.174017] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.179383] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.179962] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.179973] TCP reno registered
[ 0.180216] NET: Registered protocol family 1
[ 0.180270] pci 0000:00:02.0: Boot video device
[ 0.209214] Unpacking initramfs...
[ 0.279696] Freeing initrd memory: 26513k freed
[ 0.298589] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.298604] DMA: Placing 64MB software IO TLB between ffff8800069f9000 - ffff88000a9f9000
[ 0.298611] DMA: software IO TLB at phys 0x69f9000 - 0xa9f9000
[ 0.299557] audit: initializing netlink socket (disabled)
[ 0.299583] type=2000 audit(1322271660.072:1): initialized
[ 0.306058] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.310553] VFS: Disk quotas dquot_6.5.2
[ 0.310706] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.310915] msgmni has been set to 6359
[ 0.311614] alg: No test for stdrng (krng)
[ 0.311785] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.311794] io scheduler noop registered
[ 0.311799] io scheduler anticipatory registered
[ 0.311805] io scheduler deadline registered
[ 0.311898] io scheduler cfq registered (default)
[ 0.312260] alloc irq_desc for 755 on node -1
[ 0.312267] alloc kstat_irqs on node -1
[ 0.312336] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.312743] alloc irq_desc for 754 on node -1
[ 0.312749] alloc kstat_irqs on node -1
[ 0.312806] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.313240] alloc irq_desc for 753 on node -1
[ 0.313247] alloc kstat_irqs on node -1
[ 0.313303] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.313711] alloc irq_desc for 752 on node -1
[ 0.313718] alloc kstat_irqs on node -1
[ 0.313774] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.324239] registering netback
[ 0.324444] alloc irq_desc for 751 on node -1
[ 0.324452] alloc kstat_irqs on node -1
[ 0.328170] alloc irq_desc for 750 on node -1
[ 0.328178] alloc kstat_irqs on node -1
[ 0.328870] hpet_acpi_add: no address or irqs in _CRS
[ 0.328908] Linux agpgart interface v0.103
[ 0.328956] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 0.330065] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 0.340977] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.341142] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.341369] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.341602] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.342218] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.342517] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.342831] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.342987] PNP: No PS/2 controller found. Probing ports directly.
[ 0.345885] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.345910] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.346183] mice: PS/2 mouse device common for all mice
[ 0.346371] rtc_cmos 00:03: RTC can wake from S4
[ 0.346486] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.346557] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.346592] cpuidle: using governor ladder
[ 0.346598] cpuidle: using governor menu
[ 0.346611] No iBFT detected.
[ 0.347255] TCP cubic registered
[ 0.347584] NET: Registered protocol family 10
[ 0.349350] Mobile IPv6
[ 0.349360] NET: Registered protocol family 17
[ 0.349596] PM: Resume from disk failed.
[ 0.349634] registered taskstats version 1
[ 0.350617] rtc_cmos 00:03: setting system clock to 2011-11-26 01:41:00 UTC (1322271660)
[ 0.350753] Initalizing network drop monitor service
[ 0.350955] Freeing unused kernel memory: 604k freed
[ 0.351240] Write protecting the kernel read-only data: 4332k
[ 0.438884] udev[61]: starting version 164
[ 0.786509] usbcore: registered new interface driver usbfs
[ 0.786569] usbcore: registered new interface driver hub
[ 0.792570] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 0.792613] 8139cp 0000:05:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 0.824224] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.824278] xen: registering gsi 16 triggering 0 polarity 1
[ 0.824286] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.824291] xen: --> irq=16
[ 0.824302] Already setup the GSI :16
[ 0.824309] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.824417] r8169 0000:01:00.0: setting latency timer to 64
[ 0.824432] r8169 0000:01:00.0: unknown MAC, using family default
[ 0.824539] alloc irq_desc for 749 on node -1
[ 0.824546] alloc kstat_irqs on node -1
[ 0.825887] eth0: RTL8168b/8111b at 0xffffc90005268000, 38:60:77:60:45:89, XID 0c200000 IRQ 749
[ 0.827894] usbcore: registered new device driver usb
[ 0.829877] SCSI subsystem initialized
[ 0.834968] 8139too Fast Ethernet driver 0.9.28
[ 0.835055] xen: registering gsi 20 triggering 0 polarity 1
[ 0.835070] alloc irq_desc for 20 on node -1
[ 0.835076] alloc kstat_irqs on node -1
[ 0.835088] xen: --> irq=20
[ 0.835106] 8139too 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.836820] eth1: RealTek RTL8139 at 0xffffc9000527a000, 00:30:4f:14:4e:3e, IRQ 20
[ 0.841242] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.841315] xen: registering gsi 23 triggering 0 polarity 1
[ 0.841330] alloc irq_desc for 23 on node -1
[ 0.841336] alloc kstat_irqs on node -1
[ 0.841350] xen: --> irq=23
[ 0.841368] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.841419] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.841430] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.841500] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.841611] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.841651] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.845554] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.847620] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0384400
[ 0.864084] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.864154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.864161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.864168] usb usb1: Product: EHCI Host Controller
[ 0.864174] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
[ 0.864180] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.864510] usb usb1: configuration #1 chosen from 1 choice
[ 0.864703] hub 1-0:1.0: USB hub found
[ 0.864755] hub 1-0:1.0: 8 ports detected
[ 0.882762] libata version 3.00 loaded.
[ 0.883660] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.883754] xen: registering gsi 23 triggering 0 polarity 1
[ 0.883763] xen_allocate_pirq: returning irq 23 for gsi 23
[ 0.883768] xen: --> irq=23
[ 0.883779] Already setup the GSI :23
[ 0.883787] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.883810] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.883822] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.883856] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.883923] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 0.884116] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.884124] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.884131] usb usb2: Product: UHCI Host Controller
[ 0.884137] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 0.884143] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.884342] usb usb2: configuration #1 chosen from 1 choice
[ 0.884426] hub 2-0:1.0: USB hub found
[ 0.884470] hub 2-0:1.0: 2 ports detected
[ 0.884622] xen: registering gsi 19 triggering 0 polarity 1
[ 0.884630] xen_allocate_pirq: returning irq 19 for gsi 19
[ 0.884635] xen: --> irq=19
[ 0.884644] Already setup the GSI :19
[ 0.884652] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.884673] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.884683] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.884707] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.884805] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 0.884956] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.884964] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.884970] usb usb3: Product: UHCI Host Controller
[ 0.884976] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 0.884982] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.885273] usb usb3: configuration #1 chosen from 1 choice
[ 0.885351] hub 3-0:1.0: USB hub found
[ 0.885392] hub 3-0:1.0: 2 ports detected
[ 0.885541] xen: registering gsi 18 triggering 0 polarity 1
[ 0.885549] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.885554] xen: --> irq=18
[ 0.885563] Already setup the GSI :18
[ 0.885570] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.885591] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.885602] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.885634] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.885727] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 0.885878] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.885886] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.885892] usb usb4: Product: UHCI Host Controller
[ 0.885898] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 0.885904] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.886068] usb usb4: configuration #1 chosen from 1 choice
[ 0.886150] hub 4-0:1.0: USB hub found
[ 0.886190] hub 4-0:1.0: 2 ports detected
[ 0.886331] xen: registering gsi 16 triggering 0 polarity 1
[ 0.886338] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.886344] xen: --> irq=16
[ 0.886353] Already setup the GSI :16
[ 0.886360] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.886381] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.886391] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.886415] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.886509] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020
[ 0.886660] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.886667] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.886674] usb usb5: Product: UHCI Host Controller
[ 0.886680] usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 0.886686] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.886853] usb usb5: configuration #1 chosen from 1 choice
[ 0.886929] hub 5-0:1.0: USB hub found
[ 0.886966] hub 5-0:1.0: 2 ports detected
[ 0.899701] ahci 0000:00:1f.2: version 3.0
[ 0.899750] xen: registering gsi 18 triggering 0 polarity 1
[ 0.899758] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.899763] xen: --> irq=18
[ 0.899774] Already setup the GSI :18
[ 0.899781] ahci 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.899915] alloc irq_desc for 748 on node -1
[ 0.899922] alloc kstat_irqs on node -1
[ 0.900115] ahci: SSS flag set, parallel bus scan disabled
[ 0.900171] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.900185] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[ 0.900200] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.904679] scsi0 : ahci
[ 0.909360] scsi1 : ahci
[ 0.914331] scsi2 : ahci
[ 0.917087] scsi3 : ahci
[ 0.917663] ata1: SATA max UDMA/133 abar m1024@0xf0384000 port 0xf0384100 irq 748
[ 0.917672] ata2: SATA max UDMA/133 abar m1024@0xf0384000 port 0xf0384180 irq 748
[ 0.917679] ata3: DUMMY
[ 0.917684] ata4: DUMMY
[ 1.244063] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.250263] ata1.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 1.250272] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.256550] ata1.00: configured for UDMA/133
[ 1.272309] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
[ 1.996065] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.038859] ata2.00: ATA-8: ST3500320NS, SN06, max UDMA/133
[ 2.038868] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.081169] ata2.00: configured for UDMA/133
[ 2.096297] scsi 1:0:0:0: Direct-Access ATA ST3500320NS SN06 PQ: 0 ANSI: 5
[ 2.117879] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.118175] sd 0:0:0:0: [sda] Write Protect is off
[ 2.118184] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.118293] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.118584] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.118932] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.118940] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.119055] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.119272] sda:
[ 2.119718] sdb: sdb1
[ 2.126302] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.126533] sda1 sda2 sda3 sda4
[ 2.127783] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.464441] PM: Starting manual resume from disk
[ 2.464451] PM: Resume from partition 8:1
[ 2.464456] PM: Checking hibernation image.
[ 2.464693] PM: Error -22 checking image file
[ 2.464699] PM: Resume from disk failed.
[ 2.516023] kjournald starting. Commit interval 5 seconds
[ 2.516033] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.107658] udev[318]: starting version 164
[ 4.394085] udev[346]: renamed network interface eth0 to inteth
[ 4.430892] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 4.430924] ACPI: Sleep Button [SLPB]
[ 4.431116] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.431127] ACPI: Power Button [PWRF]
[ 4.532953] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20090903/processor_perflib-264)
[ 4.534129] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20090903/processor_perflib-264)
[ 4.661384] udev[339]: renamed network interface eth1 to exteth
[ 4.732392] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.805067] xen: registering gsi 19 triggering 0 polarity 1
[ 4.805076] xen_allocate_pirq: returning irq 19 for gsi 19
[ 4.805082] xen: --> irq=19
[ 4.805091] Already setup the GSI :19
[ 4.805099] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.966454] parport_pc 00:08: reported by Plug and Play ACPI
[ 4.966566] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 5.232625] [drm] Initialized drm 1.1.0 20060810
[ 5.419877] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.562978] xen: registering gsi 16 triggering 0 polarity 1
[ 5.562988] xen_allocate_pirq: returning irq 16 for gsi 16
[ 5.562994] xen: --> irq=16
[ 5.563004] Already setup the GSI :16
[ 5.563012] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.563027] pci 0000:00:02.0: setting latency timer to 64
[ 5.693319] xen: registering gsi 22 triggering 0 polarity 1
[ 5.693334] alloc irq_desc for 22 on node -1
[ 5.693341] alloc kstat_irqs on node -1
[ 5.693353] xen: --> irq=22
[ 5.693371] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.693488] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.712433] mtrr: type mismatch for e0000000,10000000 old: write-through new: write-combining
[ 5.712442] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 5.712657] alloc irq_desc for 747 on node -1
[ 5.712665] alloc kstat_irqs on node -1
[ 5.713108] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.813201] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 5.815093] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 6.413868] Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k
[ 6.725144] EXT3 FS on sda2, internal journal
[ 7.251139] loop: module loaded
[ 7.308699] w83627ehf: Found W83627DHG-P chip at 0x290
[ 7.644639] fuse init (API version 7.13)
[ 9.317857] exteth: link up, 100Mbps, full-duplex, lpa 0x4181
[ 13.119787] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.182682] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 13.184136] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 13.184145] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 13.184151] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 14.535606] HTB: quantum of class 10001 is big. Consider r2q change.
[ 16.687472] Bridge firewalling registered
[ 16.703313] device inteth entered promiscuous mode
[ 16.710020] r8169: inteth: link up
[ 16.710048] r8169: inteth: link up
[ 16.762453] bridge: port 1(inteth) entering learning state
[ 26.764019] bridge: no IPv6 routers present
[ 27.648025] inteth: no IPv6 routers present
[ 31.760024] bridge: port 1(inteth) entering forwarding state
[ 35.450490] HTB: quantum of class 10001 is big. Consider r2q change.
[ 41.442312] HTB: quantum of class 10001 is big. Consider r2q change.
[ 48.429284] Event-channel device installed.
[ 48.936483] alloc irq_desc for 746 on node -1
[ 48.936492] alloc kstat_irqs on node -1
[ 48.936610] alloc irq_desc for 745 on node -1
[ 48.936617] alloc kstat_irqs on node -1
[ 48.938121] XENBUS: Unable to read cpu state
[ 48.938609] XENBUS: Unable to read cpu state
** Model information
bios_vendor: Intel Corp.
bios_version: MWPNT10N.86A.0083.2011.0524.1600
board_vendor: Intel Corporation
board_name: D525MW
board_version: AAE93082-401
** Loaded modules:
Module Size Used by
xt_physdev 1508 4
xen_evtchn 4339 3
xenfs 9600 1
bridge 39662 0
stp 1440 1 bridge
xt_mark 917 1
xt_length 1164 2
xt_MARK 917 38
cls_fw 3513 5
sch_sfq 4686 5
sch_htb 11942 1
iptable_mangle 2817 1
xt_tcpudp 2319 83
xt_conntrack 2407 6
xt_state 1303 8
xt_dscp 1611 0
xt_DSCP 1995 0
xt_CLASSIFY 925 0
ipt_LOG 4518 2
ipt_REJECT 1953 0
xt_owner 1063 1
nf_nat_ftp 2031 0
nf_conntrack_ftp 5537 1 nf_nat_ftp
nf_nat_sip 4934 0
nf_conntrack_sip 13546 1 nf_nat_sip
nf_nat_h323 5095 0
nf_conntrack_h323 36992 1 nf_nat_h323
nf_nat_pptp 2034 0
nf_conntrack_pptp 3801 1 nf_nat_pptp
nf_conntrack_proto_gre 3579 1 nf_conntrack_pptp
nf_nat_proto_gre 1245 1 nf_nat_pptp
nf_nat_irc 1366 0
nf_conntrack_irc 3347 1 nf_nat_irc
iptable_filter 2258 1
iptable_nat 4299 1
ipt_MASQUERADE 1554 1
nf_nat 13372 8 nf_nat_ftp,nf_nat_sip,nf_nat_h323,nf_nat_pptp,nf_nat_proto_gre,nf_nat_irc,iptable_nat,ipt_MASQUERADE
xt_multiport 2267 0
xt_iprange 1433 0
nf_conntrack_ipv4 9833 17 iptable_nat,nf_nat
nf_conntrack 46519 17 xt_conntrack,xt_state,nf_nat_ftp,nf_conntrack_ftp,nf_nat_sip,nf_conntrack_sip,nf_nat_h323,nf_conntrack_h323,nf_nat_pptp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_nat_irc,nf_conntrack_irc,iptable_nat,ipt_MASQUERADE,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 1139 1 nf_conntrack_ipv4
ip_tables 13915 3 iptable_mangle,iptable_filter,iptable_nat
x_tables 12845 18 xt_physdev,xt_mark,xt_length,xt_MARK,xt_tcpudp,xt_conntrack,xt_state,xt_dscp,xt_DSCP,xt_CLASSIFY,ipt_LOG,ipt_REJECT,xt_owner,iptable_nat,ipt_MASQUERADE,xt_multiport,xt_iprange,ip_tables
fuse 50908 1
w83627ehf 18675 0
hwmon_vid 1828 1 w83627ehf
loop 11799 0
snd_hda_codec_realtek 235602 1
snd_hda_intel 20035 0
snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel
i915 255710 0
snd_hwdep 5380 1 snd_hda_codec
drm_kms_helper 20369 1 i915
snd_pcm 60551 2 snd_hda_intel,snd_hda_codec
snd_timer 15582 1 snd_pcm
drm 143329 2 i915,drm_kms_helper
snd 46526 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
parport_pc 18855 0
psmouse 49937 0
soundcore 4598 1 snd
serio_raw 3752 0
i2c_i801 7830 0
i2c_algo_bit 4225 1 i915
parport 27954 1 parport_pc
evdev 7352 2
pcspkr 1699 0
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
i2c_core 15819 5 i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
processor 35941 0
acpi_processor 5087 1 processor,[permanent]
video 17445 1 i915
output 1692 1 video
button 4650 1 i915
ext3 106630 1
jbd 37085 1 ext3
mbcache 5050 1 ext3
sd_mod 29905 8
crc_t10dif 1276 1 sd_mod
ahci 32534 8
uhci_hcd 18521 0
libata 133744 1 ahci
ehci_hcd 32065 0
8139too 18013 0
scsi_mod 126501 2 sd_mod,libata
8139cp 15973 0
r8169 29311 0
mii 3210 3 8139too,8139cp,r8169
usbcore 122482 3 uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
thermal 11674 0
thermal_sys 11942 3 processor,video,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02)
Subsystem: Intel Corporation Device [8086:574d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:574d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 747
Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 30c0 [size=8]
Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f0200000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Intel Corporation Device [8086:d625]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0380000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0000000-d03fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0400000-d05fffff
Prefetchable memory behind bridge: 00000000d0600000-00000000d07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d0800000-d09fffff
Prefetchable memory behind bridge: 00000000d0a00000-00000000d0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: d0c00000-d0dfffff
Prefetchable memory behind bridge: 00000000d0e00000-00000000d0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:574d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:574d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:574d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:574d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:574d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0384400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0100000-f01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 01)
Subsystem: Intel Corporation Device [8086:574d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device [8086:574d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 748
Region 0: I/O ports at 30b8 [size=8]
Region 1: I/O ports at 30cc [size=4]
Region 2: I/O ports at 30b0 [size=8]
Region 3: I/O ports at 30c8 [size=4]
Region 4: I/O ports at 30a0 [size=16]
Region 5: Memory at f0384000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Intel Corporation Device [8086:574d]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Intel Corporation Device [8086:d625]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 749
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter [11f6:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at f0100000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.3
APT prefers stable
APT policy: (990, 'stable'), (700, 'oldstable'), (400, 'unstable'), (200, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-xen-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-38 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-xen-amd64 recommends:
ii firmware-linux-free 2.6.32-38 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-xen-amd64 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-xen-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
ii xen-hypervisor-4.0-amd64 [xen 4.0.1-4 The Xen Hypervisor on AMD64
-- debconf information:
linux-image-2.6.32-5-xen-amd64/postinst/ignoring-do-bootloader-2.6.32-5-xen-amd64:
linux-image-2.6.32-5-xen-amd64/prerm/removing-running-kernel-2.6.32-5-xen-amd64: true
linux-image-2.6.32-5-xen-amd64/postinst/depmod-error-initrd-2.6.32-5-xen-amd64: false
linux-image-2.6.32-5-xen-amd64/postinst/missing-firmware-2.6.32-5-xen-amd64:
--- End Message ---