Bug#637813: Multimedia card reader outputs weird messages
tags 637813 - wheezy
found 637813 linux-2.6/3.1.1-1
quit
Hi,
Camaleón wrote:
> Tags: wheezy
For the future: please don't use these release tags unless your bug
depends on some behavior in a _separate_ package that is present in
wheezy but not on squeeze or sid. Normally, the usual found/fixed
tracking works better.
> It seems the card reader is not properly recognized. When I inser a
> SD card dmesg shows no activity at all and card is not mounted.
Interesting.
[...]
> Now (kernel 3.1) the cards are recognized when insterted into the
> embedded reader but still seeing the weird message when booting.
>
> This is from "dmesg":
>
> [ 8.924189] rts_pstor: device scan complete
> [ 8.924466] scsi 4:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
> [ 8.924614] Bad LUN (0:1)
> [ 8.924646] scsi: killing requests for dead queue
> [ 8.924857] Bad target number (1:0)
More interesting. There have been some block layer changes upstream
recently, so please test v3.2-rc1 or later once it hits experimental
(or sooner, if you have the time to build from source). Then we can
take this upstream.
> (...)
> [ 796.536030] rts_pstor 0000:01:00.1: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[...]
> Capabilities: [d0] Vital Product Data
> pcilib: sysfs_read_vpd: read failed: Connection timed out
Thanks. Is there a firmware update available for this card reader?
Regards,
Jonathan
Reply to: