--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-sparc64: console handover fails
- From: root <kolargol00@hotmail.com>
- Date: Mon, 08 Nov 2010 22:33:18 +0100
- Message-id: <20101108213318.3002.70061.reportbug@smaugy.terrier>
Package: linux-2.6
Version: 2.6.32-27
Severity: important
With the previous kernel 2.6.26, boot messages are displayed on the obp console (black text/white background) until handover to tty0 (white text/black background). Then the screen changes to tty0 and the rest of the boot process is displayed.
With kernel 2.6.32, the console handover doesn't happen and boot seems to be frozen at that point. I cannot ssh into the machine.
Some differences between the two dmesg:
--- dmesg_2.6.26 2010-11-08 21:53:10.000000000 +0100
+++ dmesg_2.6.32 2010-11-08 22:00:51.000000000 +0100
@@ -1,8 +1,9 @@
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.0.45 2001/02/08 14:33'
[ 0.000000] PROMLIB: Root node compatible:
+[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
-[ 0.000000] Linux version 2.6.26-2-sparc64 (Debian 2.6.26-24lenny1) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Thu Aug 19 04:44:07 UTC 2010
-[ 0.000000] console [earlyprom0] enabled
+[ 0.000000] Linux version 2.6.32-5-sparc64 (Debian 2.6.32-23) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-3) ) #1 Sat Sep 18 04:19:16 UTC 2010
+[ 0.000000] bootconsole [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[...]
-[ 43.470165] Console: colour dummy device 80x25
-[ 43.576720] console handover: boot [earlyprom0] -> real [tty0]
+[ 0.000000] Console: colour dummy device 80x25
+[ 0.000000] console [tty0] enabled, bootconsole disabled
I can provide more information if needed.
Regards,
Etienne
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
cpu : TI UltraSparc IIe (Hummingbird)
fpu : UltraSparc IIe integrated FPU
prom : OBP 4.0.45 2001/02/08 14:33
type : sun4u
** PCI devices:
00:03.0 Non-VGA unclassified device [0000]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: [virtual] I/O ports at <unassigned>
Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
00:05.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152 [1011:0024] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Region 0: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 04000000-040fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533]
Subsystem: ALi Corporation ALi M1533 Aladdin IV/V ISA Bridge [10b9:1533]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] I/O ports at <unassigned>
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:08.0 Multimedia audio controller [0401]: ALi Corporation M5451 PCI AC-Link Controller Audio Device [10b9:5451] (rev 01)
Subsystem: ALi Corporation M5451 PCI AC-Link Controller Audio Device [10b9:5451]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at 0900 [size=256]
Region 1: Memory at 00424000 (32-bit, non-prefetchable) [size=8K]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ALI 5451
Kernel modules: snd-ali5451
00:0c.0 Bridge [0680]: Sun Microsystems Computer Corp. RIO EBUS [108e:1100] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 6250ns max), Cache Line Size: 64 bytes
BIST result: 00
Region 0: Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 1: Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
00:0c.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO 10/100 Ethernet [eri] [108e:1101] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 1250ns max), Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 10
BIST result: 00
Region 0: Memory at 00400000 (32-bit, non-prefetchable) [size=128K]
Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Expansion ROM at 00800000 [disabled] [size=4M]
Kernel driver in use: gem
Kernel modules: sungem
00:0c.2 FireWire (IEEE 1394) [0c00]: Sun Microsystems Computer Corp. RIO 1394 [108e:1102] (rev 01) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 1250ns max), Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 11
BIST result: 00
Region 0: Memory at 00420000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at 00422000 (32-bit, non-prefetchable) [size=8K]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Expansion ROM at 00c00000 [disabled] [size=4M]
Kernel driver in use: ohci1394
Kernel modules: ohci1394
00:0c.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB [108e:1103] (rev 01) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 1250ns max), Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 12
BIST result: 00
Region 0: Memory at 02000000 (32-bit, non-prefetchable) [size=16M]
Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Expansion ROM at 01000000 [disabled] [size=4M]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0d.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c3) (prog-if ff)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 0a00 [size=8]
Region 1: I/O ports at 0a18 [size=8]
Region 2: I/O ports at 0a10 [size=8]
Region 3: I/O ports at 0a08 [size=8]
Region 4: I/O ports at 0a20 [size=16]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ALI15x3_IDE
Kernel modules: alim15x3
00:13.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 03000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 0b00 [size=256]
Region 2: Memory at 00426000 (32-bit, non-prefetchable) [size=8K]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Expansion ROM at 00440000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: atyfb
01:00.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01)
Subsystem: Intel Corporation PRO/1000 MT Dual Port Server Adapter [8086:1012]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fffffe0100000000 (64-bit, non-prefetchable) [size=1]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: I/O ports at 1000 [size=64]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel modules: e1000
01:00.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01)
Subsystem: Intel Corporation PRO/1000 MT Dual Port Server Adapter [8086:1012]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fffffe0100000000 (64-bit, non-prefetchable) [size=1]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: I/O ports at 1040 [size=64]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=00:00.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel modules: e1000
01:02.0 Mass storage controller [0180]: Promise Technology, Inc. PDC40775 (SATA 300 TX2plus) [105a:3d73] (rev 02)
Subsystem: Promise Technology, Inc. PDC40775 (SATA 300 TX2plus) [105a:3d73]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 1080 [size=128]
Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 2: I/O ports at 1100 [size=256]
Region 3: Memory at 04040000 (32-bit, non-prefetchable) [size=8K]
Region 4: Memory at 04060000 (32-bit, non-prefetchable) [size=128K]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Expansion ROM at 04048000 [disabled] [size=32K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sata_promise
Kernel modules: sata_promise
** USB devices:
Bus 001 Device 002: ID 0430:0005 Sun Microsystems, Inc. Type 6 Keyboard
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
*** dmesg.1
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.0.45 2001/02/08 14:33'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-sparc64 (Debian 2.6.32-23) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-3) ) #1 Sat Sep 18 04:19:16 UTC 2010
[ 0.000000] bootconsole [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:03:ba:08:59:d6
[ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@1f,0/SUNW,m64B@13
[ 0.000000] PROM: Built device tree with 59437 bytes of memory.
[ 0.000000] Top of RAM: 0xff22000, Total RAM: 0xfe06000
[ 0.000000] Memory hole size: 1MB
[ 0.000000] [0000010000000000-fffff80000c00000] page_structs=131072 node=0 entry=0/0
[ 0.000000] [0000010000000000-fffff80001000000] page_structs=131072 node=0 entry=1/0
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00007f91
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000077ff
[ 0.000000] 0: 0x00007800 -> 0x00007e8d
[ 0.000000] 0: 0x00007f0e -> 0x00007f16
[ 0.000000] 0: 0x00007f18 -> 0x00007f20
[ 0.000000] 0: 0x00007f22 -> 0x00007f85
[ 0.000000] 0: 0x00007f8d -> 0x00007f91
[ 0.000000] On node 0 totalpages: 32515
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32259 pages, LIFO batch:7
[ 0.000000] Booting Linux...
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32259
[ 0.000000] Kernel command line: root=UUID=11163023-fbc7-49d3-9918-027f99e1b6bb ro
[ 0.000000] PID hash table entries: 1024 (order: 0, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 131072 bytes)
[ 0.000000] Memory: 236632k available (3288k kernel code, 1416k data, 184k init) [fffff80000000000,000000000ff22000]
[ 0.000000] SLUB: Genslabs=14, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:255
[ 0.000000] clocksource: mult[b40001] shift[16]
[ 0.000000] clockevent: mult[16c16bf] shift[32]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 47.668721] Calibrating delay using timer specific routine.. 11.13 BogoMIPS (lpj=22271)
[ 47.668879] Security Framework initialized
[ 47.668936] SELinux: Disabled at boot.
[ 47.668991] Mount-cache hash table entries: 512
[ 47.670015] Initializing cgroup subsys ns
[ 47.670060] Initializing cgroup subsys cpuacct
[ 47.670083] Initializing cgroup subsys devices
[ 47.670107] Initializing cgroup subsys freezer
[ 47.670129] Initializing cgroup subsys net_cls
[ 47.672252] devtmpfs: initialized
[ 47.673945] regulator: core version 0.5
[ 47.674317] NET: Registered protocol family 16
[ 47.683747] /pci@1f,0: PCI IO[1fe02000000] MEM[1ff00000000]
[ 47.683844] /pci@1f,0: SABRE PCI Bus Module ver[0:0]
[ 47.683866] PCI: Scanning PBM /pci@1f,0
[ 47.684610] pci 0000:00:03.0: quirk: region 0800-083f claimed by ali7101 ACPI
[ 47.684646] pci 0000:00:03.0: quirk: region 0600-061f claimed by ali7101 SMB
[ 47.684759] pci 0000:00:08.0: supports D1 D2
[ 47.684776] pci 0000:00:08.0: PME# supported from D2 D3hot D3cold
[ 47.684804] pci 0000:00:08.0: PME# disabled
[ 47.685092] pci 0000:00:13.0: supports D1 D2
[ 47.685307] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 47.685337] pci 0000:01:00.0: PME# disabled
[ 47.685467] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 47.685494] pci 0000:01:00.1: PME# disabled
[ 47.685634] pci 0000:01:02.0: supports D1
[ 47.690846] bio: create slab <bio-0> at 0
[ 47.691575] vgaarb: device added: PCI:0000:00:13.0,decodes=io+mem,owns=mem,locks=none
[ 47.691665] vgaarb: loaded
[ 47.693059] /pci@1f,0/ebus@c/eeprom@1,0: Mostek regs at 0x1fff1000000
[ 47.693534] Switching to clocksource hbtick
[ 47.702059] NET: Registered protocol family 2
[ 47.702591] IP route cache hash table entries: 2048 (order: 1, 16384 bytes)
[ 47.704247] TCP established hash table entries: 8192 (order: 4, 131072 bytes)
[ 47.704995] TCP bind hash table entries: 8192 (order: 3, 65536 bytes)
[ 47.705411] TCP: Hash tables configured (established 8192 bind 8192)
[ 47.705463] TCP reno registered
[ 47.706133] NET: Registered protocol family 1
[ 47.706300] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 47.706718] Unpacking initramfs...
[ 49.016663] Freeing initrd memory: 8793k freed
[ 49.018104] power: Control reg at 1fe02000800
[ 49.019007] audit: initializing netlink socket (disabled)
[ 49.019119] type=2000 audit(1.440:1): initialized
[ 49.030622] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 49.041155] VFS: Disk quotas dquot_6.5.2
[ 49.041724] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[ 49.042255] msgmni has been set to 480
[ 49.043825] alg: No test for stdrng (krng)
[ 49.044280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 49.044356] io scheduler noop registered
[ 49.044395] io scheduler anticipatory registered
[ 49.044435] io scheduler deadline registered
[ 49.044541] io scheduler cfq registered (default)
[ 49.045053] PCI: Enabling device: (0000:00:13.0), cmd 83
[ 49.045096] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27]
[ 49.046081] atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK
[ 49.122482] Console: switching to colour frame buffer device 160x64
[ 49.151962] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[ 49.161049] [drm] Initialized drm 1.1.0 20060810
[ 49.161898] f007263c: ttyS0 at MMIO 0x1fe020003f8 (irq = 9) is a 16550A
[ 49.162463] f0073d88: ttyS1 at MMIO 0x1fe020002e8 (irq = 9) is a 16550A
[ 49.163602] Uniform Multi-Platform E-IDE driver
[ 49.164002] ide-gd driver 1.18
[ 49.164855] mice: PS/2 mouse device common for all mice
[ 49.166159] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0
[ 49.168640] TCP cubic registered
[ 49.169857] NET: Registered protocol family 10
[ 49.173059] lo: Disabled Privacy Extensions
[ 49.175350] Mobile IPv6
[ 49.175479] NET: Registered protocol family 17
[ 49.176237] registered taskstats version 1
[ 49.177230] rtc-m48t59 rtc-m48t59.0: setting system clock to 2010-11-08 18:21:20 UTC (1289240480)
[ 49.177577] Initalizing network drop monitor service
[ 49.311420] udev: starting version 160
[ 49.769998] alim15x3 0000:00:0d.0: IDE controller (0x10b9:0x5229 rev 0xc3)
[ 49.770340] PCI: Enabling device: (0000:00:0d.0), cmd 5
[ 49.770494] alim15x3 0000:00:0d.0: 100% native mode on irq 15
[ 49.770737] ide0: BM-DMA at 0x1fe02000a20-0x1fe02000a27
[ 49.771023] ide1: BM-DMA at 0x1fe02000a28-0x1fe02000a2f
[ 49.771293] Probing IDE interface ide0...
[ 49.806457] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 49.806765] Copyright (c) 1999-2006 Intel Corporation.
[ 49.807130] PCI: Enabling device: (0000:01:00.0), cmd 3
[ 50.121315] e1000: 0000:01:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:04:23:ab:40:14
[ 50.240824] usbcore: registered new interface driver usbfs
[ 50.242266] usbcore: registered new interface driver hub
[ 50.243763] usbcore: registered new device driver usb
[ 50.267542] SCSI subsystem initialized
[ 50.435386] hda: CF 4GB, CFA DISK drive
[ 50.463739] libata version 3.00 loaded.
[ 50.468067] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 50.468499] PCI: Enabling device: (0000:01:00.1), cmd 3
[ 50.474462] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 50.732909] e1000: 0000:01:00.1: e1000_probe: (PCI:33MHz:32-bit) 00:04:23:ab:40:15
[ 50.750844] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 50.786810] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 50.793878] sata_promise 0000:01:02.0: version 2.12
[ 50.793926] PCI: Enabling device: (0000:01:02.0), cmd 3
[ 50.799182] scsi0 : sata_promise
[ 50.808887] scsi1 : sata_promise
[ 50.816884] scsi2 : sata_promise
[ 50.824658] ata1: SATA max UDMA/133 mmio m8192@0x1ff04040000 ata 0x1ff04040200 irq 19
[ 50.832205] ata2: SATA max UDMA/133 mmio m8192@0x1ff04040000 ata 0x1ff04040280 irq 19
[ 50.839663] ata3: PATA max UDMA/133 mmio m8192@0x1ff04040000 ata 0x1ff04040300 irq 19
[ 51.125633] hdb: LTN485S, ATAPI CD/DVD-ROM drive
[ 51.133953] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO5
[ 51.134115] hda: UDMA/66 mode selected
[ 51.142035] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 51.142120] hdb: UDMA/33 mode selected
[ 51.149989] Probing IDE interface ide1...
[ 51.381688] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 51.407739] ata1.00: ATA-8: WDC WD20EARS-00MVWB0, 50.0AB50, max UDMA/133
[ 51.416073] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 51.430271] ata1.00: configured for UDMA/133
[ 51.439512] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARS-00M 50.0 PQ: 0 ANSI: 5
[ 51.725884] ide0 at 0x1fe02000a00-0x1fe02000a07,0x1fe02000a1a on irq 15
[ 51.736149] ide1 at 0x1fe02000a10-0x1fe02000a17,0x1fe02000a0a on irq 15
[ 51.746005] hda: max request size: 128KiB
[ 51.755454] hda: 7847280 sectors (4017 MB) w/1KiB Cache, CHS=7785/16/63
[ 51.765279] hda:
[ 51.773663] ata2: SATA link down (SStatus 0 SControl 300)
[ 51.794381] hda1 hda3
[ 51.808152] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
[ 51.820534] PHY ID: 437421, addr: 1
[ 51.825651] eth2: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:08:59:d6
[ 51.836039] eth2: Found Generic MII PHY
[ 51.917719] firewire_ohci: Added fw-ohci device 0000:00:0c.2, OHCI version 1.0
[ 51.928403] ohci_hcd 0000:00:0c.3: OHCI Host Controller
[ 51.940273] ohci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 1
[ 51.977129] ohci_hcd 0000:00:0c.3: irq 12, io mem 0x1ff02000000
[ 52.035851] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 52.051843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 52.062542] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 52.073146] usb usb1: Product: OHCI Host Controller
[ 52.083594] usb usb1: Manufacturer: Linux 2.6.32-5-sparc64 ohci_hcd
[ 52.094165] usb usb1: SerialNumber: 0000:00:0c.3
[ 52.105988] sd 0:0:0:0: [sda] Write Protect is off
[ 52.116704] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 52.116900] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 52.128656] sda:
[ 52.130124] usb usb1: configuration #1 chosen from 1 choice
[ 52.152209] sda1 sda2 sda3
[ 52.164269] hub 1-0:1.0: USB hub found
[ 52.178905] sd 0:0:0:0: [sda] Attached SCSI disk
[ 52.198652] hub 1-0:1.0: 4 ports detected
[ 52.371657] ide-cd driver 5.00
[ 52.416958] ide-cd: hdb: ATAPI 48X CD-ROM drive, 120kB Cache
[ 52.427791] Uniform CD-ROM driver Revision: 3.20
[ 52.439678] firewire_core: created device fw0: GUID 0003bafffe0859d6, S400
[ 52.561681] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 52.727949] usb 1-2: New USB device found, idVendor=0430, idProduct=0005
[ 52.738691] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 52.752344] usb 1-2: configuration #1 chosen from 1 choice
[ 52.855512] usbcore: registered new interface driver hiddev
[ 52.874132] input: HID 0430:0005 as /devices/root/f0064548/pci0000:00/0000:00:0c.3/usb1/1-2/1-2:1.0/input/input0
[ 52.886136] generic-usb 0003:0430:0005.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:0c.3-2/input0
[ 52.897803] usbcore: registered new interface driver usbhid
[ 52.910298] usbhid: v2.6:USB HID core driver
[ 54.217840] eth2: Link is up at 100 Mbps, full-duplex.
[ 57.267631] kjournald starting. Commit interval 5 seconds
[ 57.279136] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.966533] udev: starting version 160
[ 58.879764] udev: renamed network interface eth0 to eth2
[ 58.912979] udev: renamed network interface eth2_rename to eth0
[ 59.660153] PCI: Enabling device: (0000:00:08.0), cmd 3
[ 67.714666] Adding 1951880k swap on /dev/sda1. Priority:-1 extents:1 across:1951880k
[ 67.915098] EXT3 FS on hda1, internal journal
[ 68.213489] loop: module loaded
[ 69.006773] kjournald starting. Commit interval 5 seconds
[ 69.019872] EXT3 FS on sda2, internal journal
[ 69.031472] EXT3-fs: mounted filesystem with ordered data mode.
[ 70.383528] RPC: Registered udp transport module.
[ 70.394989] RPC: Registered tcp transport module.
[ 70.406370] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 70.519601] Slow work thread pool: Starting up
[ 70.531383] Slow work thread pool: Ready
[ 70.544359] FS-Cache: Loaded
[ 70.710238] FS-Cache: Netfs 'nfs' registered for caching
[ 70.896906] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 71.185400] eth0: Link is up at 100 Mbps, full-duplex.
[ 71.196520] eth0: Pause is disabled
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: sparc (sparc64)
Kernel: Linux 2.6.26-2-sparc64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-sparc64 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.5 tools for generating an initramfs
ii linux-base 2.6.32-27 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-sparc64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-sparc64 suggests:
pn fdutils <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
ii silo 1.4.14+git20100228-1+b1 Sparc Improved LOader
Versions of packages linux-image-2.6.32-5-sparc64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-sparc64/postinst/missing-firmware-2.6.32-5-sparc64:
linux-image-2.6.32-5-sparc64/postinst/depmod-error-initrd-2.6.32-5-sparc64: false
linux-image-2.6.32-5-sparc64/postinst/ignoring-do-bootloader-2.6.32-5-sparc64:
linux-image-2.6.32-5-sparc64/prerm/removing-running-kernel-2.6.32-5-sparc64: true
--- End Message ---