Bug#646218: linux-image-3.0.0-1-amd64: Diver ACPI Errors.
Package: linux-2.6
Version: 3.0.0-3
Severity: normal
Dear Maintainer,
I have diver ACPI-errors like:
$ dmesg |grep -i acpi
[ 0.000000] BIOS-e820: 0000000077e70000 - 0000000077e80000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000077e80000 - 0000000077f00000 (ACPI NVS)
[ 0.000000] ACPI: RSDP 00000000000f8500 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0000000077e7957b 00040 (v01 DELL M08 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0000000077e7fb9a 00074 (v01 ATI Bowfin 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 0000000077e795bb 065DF (v01 ATI SB600 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0000000077e90fc0 00040
[ 0.000000] ACPI: TCPA 0000000077e7fc0e 00032 (v02 AMD 06040000 PTEC 00000000)
[ 0.000000] ACPI: SSDT 0000000077e7fc40 00182 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 0000000077e7fdc2 00054 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 0000000077e7fe16 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 0000000077e7fe52 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 0000000077e7fe8a 00176 (v01 DELL M08 06040000 LTP 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538310 base: 0xfed00000
[ 0.011510] ACPI: Core revision 20110413
[ 0.157364] PM: Registering ACPI NVS region at 77e80000 (524288 bytes)
[ 0.157364] ACPI: bus type pci registered
[ 0.161103] ACPI: EC: Look up EC in DSDT
[ 0.161103] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.168082] ACPI: Interpreter enabled
[ 0.168087] ACPI: (supports S0 S3 S4 S5)
[ 0.168120] ACPI: Using IOAPIC for interrupt routing
[ 0.179447] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.184368] ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62
[ 0.184587] ACPI: No dock devices found.
[ 0.184596] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.184840] ACPI Error: Needed type [Reference], found [Device] ffff880077bddda8 (20110413/exresop-104)
[ 0.184849] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20110413/dswexec-460)
[ 0.184858] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880077bfdb00), AE_AML_OPERAND_TYPE (20110413/psparse-536)
[ 0.184875] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.189574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.189741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.189900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.189973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.190121] ACPI Error: Needed type [Reference], found [Device] ffff880077bddda8 (20110413/exresop-104)
[ 0.190128] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20110413/dswexec-460)
[ 0.190136] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880077bfdb00), AE_AML_OPERAND_TYPE (20110413/psparse-536)
[ 0.190152] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.190217] ACPI Error: Needed type [Reference], found [Device] ffff880077bddda8 (20110413/exresop-104)
[ 0.190224] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20110413/dswexec-460)
[ 0.190231] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880077bfdb00), AE_AML_OPERAND_TYPE (20110413/psparse-536)
[ 0.190247] pci0000:00: ACPI _OSC request failed (AE_AML_OPERAND_TYPE), returned control mask: 0x1d
[ 0.190250] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.197987] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.198063] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.198136] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.198209] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.198282] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.198355] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.198429] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.198502] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.198577] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[ 0.198852] PCI: Using ACPI for IRQ routing
[ 0.206663] pnp: PnP ACPI init
[ 0.206690] ACPI: bus type pnp registered
[ 0.207971] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.208198] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.208857] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.208941] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.209021] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.209090] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.209172] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.209260] pnp 00:07: Plug and Play ACPI device, IDs SYN1015 SYN0100 SYN0002 PNP0f13 (active)
[ 0.209590] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209828] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.209969] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.210479] pnp: PnP ACPI: found 11 devices
[ 0.210483] ACPI: ACPI bus type pnp unregistered
[ 0.925850] ACPI: Thermal Zone [THRM] (29 C)
[ 6.504500] ACPI: Power Button [PWRB]
[ 6.504617] ACPI: Sleep Button [SLPB]
[ 6.505229] ACPI: Lid Switch [LID]
[ 6.505368] ACPI: Power Button [PWRF]
[ 6.645264] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 6.650385] acpi device:1d: registered as cooling_device0
[ 6.650517] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.944486] ACPI: Battery Slot [BAT1] (battery absent)
[ 6.969805] ACPI: acpi_idle registered with cpuidle
[ 6.973962] ACPI: processor limited to max C-state 1
[ 7.072509] ACPI: AC Adapter [ACAD] (on-line)
[ 8.223403] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 8.223410] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 136.188790] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
May it help to improve Linux kernel.
-- Package-specific info:
** Version:
Linux version 3.0.0-1-amd64 (Debian 3.0.0-3) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 16:21:11 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=993c69c1-2673-43a7-8cff-c38a3246fd68 ro quiet pci=use_crs
** Not tainted
** Kernel log:
[ 8.717835] [drm] CRT1: INTERNAL_DAC2
[ 8.717837] [drm] Connector 1:
[ 8.717840] [drm] LVDS
[ 8.717843] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[ 8.717846] [drm] Encoders:
[ 8.717848] [drm] LCD1: INTERNAL_LVDS
[ 8.770488] [drm] Radeon display connector VGA-1: Found valid EDID
[ 8.821010] [drm] Radeon display connector LVDS-1: Found valid EDID
[ 8.821041] [drm] radeon: power management initialized
[ 8.944914] composite sync not supported
[ 8.957901] [drm] fb mappable at 0xC8040000
[ 8.957904] [drm] vram apper at 0xC8000000
[ 8.957907] [drm] size 5763072
[ 8.957909] [drm] fb depth is 24
[ 8.957911] [drm] pitch is 6400
[ 8.958011] fbcon: radeondrmfb (fb0) is primary device
[ 9.099661] Console: switching to colour frame buffer device 160x50
[ 9.109949] fb0: radeondrmfb frame buffer device
[ 9.109952] drm: registered panic notifier
[ 9.109961] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:05.0 on minor 0
[ 10.095015] kvm: Nested Virtualization enabled
[ 10.483160] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 10.763911] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 11.035810] device-mapper: uevent: version 1.0.3
[ 11.035947] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 129.909712] Intel AES-NI instructions are not detected.
[ 129.993114] padlock_aes: VIA PadLock not detected.
[ 130.043800] padlock_sha: VIA PadLock Hash Engine not detected.
[ 130.528217] loop: module loaded
[ 130.667877] usblp1: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
[ 130.667916] usbcore: registered new interface driver usblp
[ 131.539270] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 132.489371] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 132.561419] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 132.824814] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 133.257582] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 134.029265] fuse init (API version 7.16)
[ 136.188790] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 136.804211] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[ 136.804218] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[ 136.804799] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 139.740389] composite sync not supported
[ 139.796047] composite sync not supported
[ 140.517331] lp: driver loaded but no devices found
[ 140.862222] ppdev: user-space parallel port driver
[ 144.767768] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 (2 cpu cores) (version 2.20.00)
[ 144.767824] powernow-k8: fid 0x8 (1600 MHz), vid 0x13
[ 144.767827] powernow-k8: fid 0x0 (800 MHz), vid 0x1e
[ 147.472035] eth0: no IPv6 routers present
[ 265.053018] composite sync not supported
[ 294.131910] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 295.015909] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0
[ 5142.504398] usb 1-7.1: new high speed USB device number 7 using ehci_hcd
[ 5142.613023] usb 1-7.1: New USB device found, idVendor=152d, idProduct=2329
[ 5142.613033] usb 1-7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 5142.613042] usb 1-7.1: Product: USB to ATA/ATAPI Bridge
[ 5142.613049] usb 1-7.1: Manufacturer: JMicron
[ 5142.613055] usb 1-7.1: SerialNumber: DAA1872927FF
[ 5142.702348] usbcore: registered new interface driver uas
[ 5142.732494] Initializing USB Mass Storage driver...
[ 5142.733010] usb-storage 1-7.1:1.0: Quirks match for vid 152d pid 2329: 8020
[ 5142.734417] scsi6 : usb-storage 1-7.1:1.0
[ 5142.734846] usbcore: registered new interface driver usb-storage
[ 5142.734853] USB Mass Storage support registered.
[ 5143.733127] scsi 6:0:0:0: Direct-Access WDC WD20 EARS-00MVWB0 PQ: 0 ANSI: 2 CCS
[ 5143.749463] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 5143.749704] sd 6:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 5143.750565] sd 6:0:0:0: [sdb] Write Protect is off
[ 5143.750574] sd 6:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 5143.751440] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5143.773288] sdb: sdb1
[ 5143.776328] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 5204.804145] b44 ssb0:0: eth0: Link is down
[ 5212.804225] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[ 5212.804237] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[ 5214.804133] b44 ssb0:0: eth0: Link is down
[ 5216.804228] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[ 5216.804241] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[ 5292.529310] composite sync not supported
[ 5292.544646] CE: hpet increased min_delta_ns to 20113 nsec
[ 5295.832231] composite sync not supported
[ 5295.889906] composite sync not supported
[ 5300.539921] composite sync not supported
[ 5301.244285] composite sync not supported
[ 5311.341422] composite sync not supported
[ 5311.397452] composite sync not supported
[ 5321.772893] composite sync not supported
[ 5368.575236] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: commit=10,errors=remount-ro
[ 5373.388205] composite sync not supported
[ 8528.156754] composite sync not supported
[ 8550.376523] usb 1-7.1: USB disconnect, device number 7
[ 8602.760816] composite sync not supported
[ 8817.732831] CE: hpet increased min_delta_ns to 30169 nsec
[ 8914.184412] CE: hpet increased min_delta_ns to 45253 nsec
[11158.183366] CE: hpet increased min_delta_ns to 67879 nsec
[12813.208754] exe (9121): /proc/9121/oom_adj is deprecated, please use /proc/9121/oom_score_adj instead.
[14239.815553] composite sync not supported
[15588.090929] composite sync not supported
[15645.846401] composite sync not supported
[15647.154952] composite sync not supported
** Model information
sys_vendor: Dell Inc.
product_name: Inspiron 1501
product_version: Not Specified
chassis_vendor: Dell Inc.
chassis_version: Not Specified
bios_vendor: Dell Inc.
bios_version: 2.6.3
board_vendor: Dell Inc.
board_name: 0UW744
board_version:
** Loaded modules:
Module Size Used by
usb_storage 47996 0
uas 13299 0
powernow_k8 17688 1
mperf 12453 1 powernow_k8
cpufreq_userspace 12576 0
cpufreq_stats 12862 0
cpufreq_conservative 13147 0
cpufreq_powersave 12454 0
parport_pc 22395 0
ppdev 12763 0
lp 17270 0
parport 31929 3 parport_pc,ppdev,lp
snd_hrtimer 12604 1
uinput 17469 1
fuse 66430 1
nf_conntrack_ipv6 13317 3
nf_defrag_ipv6 12831 1 nf_conntrack_ipv6
ip6table_mangle 12540 0
ip6table_filter 12540 1
ip6_tables 22263 2 ip6table_mangle,ip6table_filter
xt_tcpudp 12570 2
xt_state 12503 6
iptable_mangle 12536 0
iptable_nat 12928 0
nf_nat 18306 1 iptable_nat
nf_conntrack_ipv4 18176 6 iptable_nat,nf_nat
nf_conntrack 57034 5 nf_conntrack_ipv6,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 12483 1 nf_conntrack_ipv4
iptable_filter 12536 1
ip_tables 22131 3 iptable_mangle,iptable_nat,iptable_filter
x_tables 19024 9 ip6table_mangle,ip6table_filter,ip6_tables,xt_tcpudp,xt_state,iptable_mangle,iptable_nat,iptable_filter,ip_tables
usblp 17380 0
loop 22711 0
sha256_generic 16797 2
cryptd 14549 0
aes_x86_64 16796 4
aes_generic 33026 1 aes_x86_64
cbc 12755 2
dm_crypt 22611 1
dm_mod 63164 3 dm_crypt
kvm_amd 51180 0
kvm 268970 1 kvm_amd
snd_hda_codec_idt 53749 1
radeon 652630 4
snd_hda_intel 26140 3
snd_hda_codec 72699 2 snd_hda_codec_idt,snd_hda_intel
ttm 52979 1 radeon
drm_kms_helper 27216 1 radeon
drm 163280 6 radeon,ttm,drm_kms_helper
snd_hwdep 13186 1 snd_hda_codec
snd_pcm 68104 3 snd_hda_intel,snd_hda_codec
snd_seq 45208 1
snd_timer 22581 4 snd_hrtimer,snd_pcm,snd_seq
snd_seq_device 13137 1 snd_seq
i2c_algo_bit 12850 1 radeon
joydev 17262 0
evdev 17558 33
sp5100_tco 12900 0
dell_laptop 12943 0
i2c_piix4 12536 0
rfkill 19080 1 dell_laptop
edac_core 35343 0
dcdbas 13256 1 dell_laptop
dell_wmi 12477 0
snd 52823 13 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
i2c_core 23909 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
ac 12624 0
sparse_keymap 12795 1 dell_wmi
soundcore 13152 1 snd
edac_mce_amd 17103 0
processor 27942 1 powernow_k8
battery 13109 0
k8temp 12531 0
pcspkr 12579 0
shpchp 31343 0
snd_page_alloc 13043 2 snd_hda_intel,snd_pcm
pci_hotplug 27232 1 shpchp
wmi 13243 1 dell_wmi
psmouse 55656 0
video 17707 0
serio_raw 12846 0
button 12930 0
power_supply 13475 4 radeon,dell_laptop,ac,battery
usbhid 40516 0
hid 73172 1 usbhid
ext4 313917 2
mbcache 13066 1 ext4
jbd2 62574 1 ext4
crc16 12343 1 ext4
sg 25985 0
sd_mod 36259 3
crc_t10dif 12348 1 sd_mod
ata_generic 12479 0
pata_atiixp 12697 0
thermal 17426 0
thermal_sys 17949 3 processor,video,thermal
ahci 25089 2
libahci 22767 1 ahci
libata 149043 4 ata_generic,pata_atiixp,ahci,libahci
b44 27917 0
ohci_hcd 26576 0
scsi_mod 162442 5 usb_storage,uas,sg,sd_mod,libata
ehci_hcd 40090 0
sdhci_pci 13304 0
sdhci 26511 1 sdhci_pci
ssb 44837 1 b44
pcmcia 36815 1 ssb
mii 12675 1 b44
mmc_core 63601 2 sdhci,ssb
usbcore 128338 7 usb_storage,uas,usblp,usbhid,ohci_hcd,ehci_hcd
pcmcia_core 18333 1 pcmcia
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10)
Subsystem: Dell Device [1028:01f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8438 [size=8]
Region 1: I/O ports at 8454 [size=4]
Region 2: I/O ports at 8430 [size=8]
Region 3: I/O ports at 8450 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at c0004400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 13)
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8410 [size=16]
Region 1: Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8420 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Dell Device [1028:01f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=08, subordinate=0a, sec-latency=64
Memory behind bridge: c0300000-c03fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS482 [Radeon Xpress 200M] [1002:5975] (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:01f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
Subsystem: Dell Wireless 1390 WLAN Mini-Card [1028:0007]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at <ignored> (32-bit, non-prefetchable)
Capabilities: <access denied>
08:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
Subsystem: Dell Device [1028:01f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: Memory at c0300000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44
08:01.0 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
Subsystem: Dell Device [1028:01f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 20
Region 0: Memory at c0302800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
08:01.1 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 01)
Subsystem: Dell Dell Inspiron 1501 [1028:01f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 0: Memory at c0302c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 002: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 005: ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler / Genius NetScroll 120
Bus 001 Device 006: ID 04f2:0833 Chicony Electronics Co., Ltd
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (992, 'testing'), (990, 'stable'), (900, 'stable-updates')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.40
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.3
ii module-init-tools 3.16-1
Versions of packages linux-image-3.0.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.0.0-1-amd64 suggests:
pn grub-pc 1.99-12
pn linux-doc-3.0.0 <none>
Versions of packages linux-image-3.0.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux <none>
pn firmware-linux-nonfree 0.33
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true
linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false
* linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64:
Reply to: