linux-image-2.26.32-5-686: Kerneloops and race condition after USB2 HDD disconnection, preventing clean shutdown
Prior to the bug report:
- the use of any mailing list is new to me, and therefore I'm
refraining from attaching any files, even if they're plain text files
- I hope I'm sending in a proper bug report to the right place.
- Just found these closely related bugs mentioned, but still filing
the bug report, as I'm uncertain if this one is similar enough, the
platform is different (i386, not amd64), and in this one the
disconnection is NOT user-initiated:
Bug#631187: marked as done (Kernel panics when removing external hard drive)
Bug#633890: marked as done ([linux-2.6] kernel oops while
disconnecting usb cdrom)
Bug#636263: marked as done (linux-image-2.6.39-2-amd64: kernel panic
when unmounting USB drives)
Bug#642043: marked as done (linux-image-3.0.0-1-amd64 frequently
kerneloops on unmounting USB drives)
An external USB2 harddisk suddenly disconnected and immediately
reconnected again, while copying large files from the disk to an
internal harddisk. This resulted in the usual error message (original
hardware bug in controller chip, described below), but also in a
kerneloops and several processes entering a blocked state, becoming
unresponsive to interrupts (such as the "kill -TERM #Pid" command,
obviously executed as root). Some of these processes were deamons,
running on behalf of different users. The general course of events
was:
1. USB2 hard disk disconnects and immediately reconnects, which could
be caused by a known bug in certain EHCI controller chips.
2. An X desktop process probably got terminated and restarted, ending
up in a blocked state (indicated as 'D' in htop)
3. Checking /etc/mtab, I notice the two partitions on the old device
path are still registered as mounted, even though the node
("/dev/sdd1") doesn't exist any longer.
4. An attempt to unmount either one of them fails, at which point
another kerneloops and stack trace is being printed and logged - so
yet another severe (unhandled) error or exception occurred
5. I notice that several processes are in a blocked state, including
daemon processes.
6. The blocked processes prevent a normal shutdown from the desktop
7. Terminating the blocked processes fails (using 'kill -KILL #PID'
and 'kill -TERM #PID'), in any possible way this command didn't work,
using:
- the KILL/TERM options in htop in a virtual terminal
- the KILL/TERM commands from the CLI in a virtual terminal
- the KILL/TERM commands from a real terminal (not under X)
8. As a last resort, I issued the command 'init 6' on a plain non-X
terminal (switching using <CTRL>+<ALT>+<F1>), which failed either
9. Decided to take the chance and use the case's reset button,
fortunately without severe filesystem corruptions
The expected behaviour upon USB2 HDD disconnection and reconnection:
- a read error is issued and logged
- system returns to normal operation without any other side-effects
- (not 100% sure) the entries in /dev/mtab should disappear
- the device is reconnected and detected through the usual process
- specific re-mounting may or may not be required, depending on the
system's configuration
The "previous session" logs show the expected behaviour.
Suggestion: None. I know how to work around the usual disconnection
bug, no idea about the kernel drivers in between. I have reason to
believe it is a problem with the drivers, because of the blocking
stack of different processes and daemons for different users,
including some X-processes, and obviously the BUG lines in
/var/log/syslog, along with the failure of the "init 6" command. I'm
not very experienced though, but the logs must be saying a lot.
**************
* NOTES *
**************
1. USB2 CONTROLLER BUG
This is a hardware bug in the controller itself, that I found reported
on various web sites. I found a lot of Windows users reporting the
same problem, so it's not specifically Debian- or Linux-related. There
is a good chance that I've got the same hardware problem. Some
proposed workarounds:
- Compile the kernel without USB2 support
- Slow down the transfers, using the command "echo 8 >
/sys/block/<dev>/device/max_sectors", where <dev> is the node of the
device (e.g. /dev/sdc) and 8 can be any factor of 8 (e.g. 8, 16, 24,
32 and so on). => Worked when using the MEPIS Live CD
- Disable USB2 support in the BIOS (works for me now)
- Simply buy a USB2 controller with a different chip, as PCI expansion
card, and use that one.
2. CLEAR CONFIGURATION DIFFERENCE
While MEPIS uses the raw device nodes in /etc/fstab for identification
of partitions (e.g. /dev/sdc1), I've adopted the use of UUIDs instead,
just during the past couple of days, and this was actually the first
time that included any considerable data transfers. That difference
may have triggered the kerneloops.
Initial system setup after installation was not fully completed.
3. DIFFERENT ACTIVITIES
When the first kerneloops occurred, I was copying large chunks of
data. When the second one occurred, I was trying to clear the invalid
lines in /etc/mtab by using the "unmount" command, instead of editing
the file myself.
4. HARDWARE CONFIGURATION
System may be running around the PSU's maximum capacity, but is running stable.
Not aware of any known symptoms of an underpowered system, but...
system turns off once when booting cold after 3-5 seconds and turns
back on after ~2 seconds. Then resumes to normal operation.
CPU is underclocked, working with a BIOS power setting of -0.1000V for
years without any problems.
RAM check using memtest was done ~5 days ago, passing without any errors.
No data corruption detected at this setup.
5. OTHER
I hope that the formatting I use works out properly on different
systems. Trying to lean towards a bit too much data provided rather
than too little.
The logfiles mentioned were saved before rebooting.
Showing two separate sections:
1. Log entries of earlier sessions, with usual exceptions as expected
(included logs: syslog, kern.log, 2 relevant lines in daemon.log)
2. Log entries of the session where kernel bug report shows up
(included logs: syslog, kern.log, no directly relevant entries in
daemon.log)
**************************************************
* SYSTEM HARDWARE INFO: Overview *
**************************************************
HARDWARE (additional to hwinfo/discover output)
Mainboard: EPoX EP-4PLA3I, with Intel 848P+ICH5 chipset, clocked at
133 MHz (200 MHz max.) with 2 physical memory banks
Memory: 2 * 1GB DDR (@ 266 MHz)
USB NOTE: With USB2 disabled in the BIOS, and a working system, there
is no way to report on the USB2 controller right now.
However, info can be found in the logs included, and Intel's
documentation of the chipset is available at
http://download.intel.com/design/chipsets/datashts/25357502.pdf
HARDWARE AS REPORTED BY hwinfo:
cpu:
Intel(R) Pentium(R) 4 CPU 3.00GHz, 1986 MHz
Intel(R) Pentium(R) 4 CPU 3.00GHz, 1986 MHz
keyboard:
/dev/input/event0 AT Translated Set 2 keyboard
mouse:
/dev/input/mice ImExPS/2 Generic Explorer Mouse
graphics card:
ATI RV280 5964
ATI RV280 [Radeon 9200 SE] (Secondary)
sound:
Intel 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
storage:
Intel 82801EB/ER (ICH5/ICH5R) IDE Controller
VIA VT6421 IDE RAID Controller
network:
eth0 EPoX Onboard RTL8101L 10/100 MBit
network interface:
lo Loopback network interface
eth0 Ethernet network interface
disk:
/dev/sda HTS721080G9SA00
/dev/sdb Maxtor 6Y160P0
/dev/sdc ST3320620A
/dev/sdd WD 2500JB External
partition:
/dev/sda1 Partition
/dev/sda2 Partition
/dev/sda3 Partition
/dev/sda4 Partition
/dev/sdb1 Partition
/dev/sdb2 Partition
/dev/sdb3 Partition
/dev/sdb4 Partition
/dev/sdb5 Partition
/dev/sdb6 Partition
/dev/sdb7 Partition
/dev/sdc1 Partition
/dev/sdc2 Partition
/dev/sdc3 Partition
/dev/sdc4 Partition
/dev/sdc5 Partition
/dev/sdc6 Partition
/dev/sdc7 Partition
/dev/sdc8 Partition
/dev/sdc9 Partition
/dev/sdc10 Partition
/dev/sdd1 Partition
/dev/sdd2 Partition
/dev/sdd3 Partition
/dev/sdd4 Partition
cdrom:
/dev/sr0 HL-DT-ST CD-RW GCE-8520B
/dev/sr1 HL-DT-ST DVD-ROM GDR8161B
usb controller:
Intel 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
Intel 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
Intel 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
Intel 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
bios:
BIOS
bridge:
Intel 82865G/PE/P DRAM Controller/Host-Hub Interface
Intel 82865G/PE/P PCI to AGP Controller
Intel 82801 PCI Bridge
Intel 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
hub:
Linux 2.6.32-5-686 uhci_hcd UHCI Host Controller
Linux 2.6.32-5-686 uhci_hcd UHCI Host Controller
Linux 2.6.32-5-686 uhci_hcd UHCI Host Controller
Linux 2.6.32-5-686 uhci_hcd UHCI Host Controller
memory:
Main Memory
unknown:
FPU
DMA controller
PIC
Timer
Keyboard controller
PS/2 Controller
Intel 82865G/PE/P Processor to I/O Memory Interface
Intel 82801EB/ER (ICH5/ICH5R) SMBus Controller
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
*********************************************
* SYSTEM HARDWARE INFO: cpu *
*********************************************
HARDWARE REPORTED BY hwinfo
01: None 00.0: 10103 CPU
[Created at cpu.304]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: Intel
Vendor: "GenuineIntel"
Model: 15.3.4 "Intel(R) Pentium(R) 4 CPU 3.00GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,constant_tsc,pebs,bts,pni,dtes64,monitor,ds_cpl,cid,xtpr
Clock: 1986 MHz
BogoMips: 3972.97
Cache: 1024 kb
Units/Processor: 2
Config Status: cfg=new, avail=yes, need=no, active=unknown
02: None 01.0: 10103 CPU
[Created at cpu.304]
Unique ID: wkFv.j8NaKXDZtZ6
Hardware Class: cpu
Arch: Intel
Vendor: "GenuineIntel"
Model: 15.3.4 "Intel(R) Pentium(R) 4 CPU 3.00GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,constant_tsc,pebs,bts,pni,dtes64,monitor,ds_cpl,cid,xtpr
Clock: 1986 MHz
BogoMips: 3973.57
Cache: 1024 kb
Units/Processor: 2
Config Status: cfg=new, avail=yes, need=no, active=unknown
*********************************************
* SYSTEM HARDWARE INFO: bios *
*********************************************
HARDWARE REPORTED BY hwinfo
01: None 00.0: 10105 BIOS
[Created at bios.190]
Unique ID: rdCR.lZF+r4EgHp4
Hardware Class: bios
BIOS Keyboard LED Status:
Scroll Lock: off
Num Lock: on
Caps Lock: off
Base Memory: 636 kB
PnP BIOS: @@@0000
MP spec rev 1.4 info:
OEM id: "OEM00000"
Product id: "PROD00000000"
1 CPUs (0 disabled)
BIOS32 Service Directory Entry: 0xfbb30
SMBIOS Version: 2.2
BIOS Info: #0
Vendor: "Phoenix Technologies, LTD"
Version: "6.00 PG"
Date: "08/06/2004"
Start Address: 0xe0000
ROM Size: 384 kB
Features: 0x0037000000007fcb9e90
ISA supported
PCI supported
PnP supported
APM supported
BIOS flashable
BIOS shadowing allowed
CD boot supported
Selectable boot supported
BIOS ROM socketed
EDD spec supported
360kB Floppy supported
1.2MB Floppy supported
720kB Floppy supported
2.88MB Floppy supported
Print Screen supported
8042 Keyboard Services supported
Serial Services supported
Printer Services supported
CGA/Mono Video supported
ACPI supported
USB Legacy supported
AGP supported
LS-120 boot supported
ATAPI ZIP boot supported
System Info: #1
UUID: undefined, but settable
Wake-up: 0x06 (Power Switch)
Board Info: #2
Product: "Breeds Hill"
Chassis Info: #3
Type: 0x03 (Desktop)
Bootup State: 0x02 (Unknown)
Power Supply State: 0x02 (Unknown)
Thermal State: 0x02 (Unknown)
Security Status: 0x02 (Unknown)
Processor Info: #4
Socket: "Socket 478"
Socket Type: 0x04 (ZIF Socket)
Socket Status: Populated
Type: 0x03 (CPU)
Family: 0xb2 (Pentium 4)
Manufacturer: "Intel"
Version: "Intel(R) Pentium(R) 4 CPU"
Processor ID: 0xbfebfbff00000f34
Status: 0x01 (Enabled)
Voltage: 1.5 V
External Clock: 133 MHz
Max. Speed: 3066 MHz
Current Speed: 2000 MHz
L1 Cache: #10
L2 Cache: #11
Type 5 Record: #5
Data 00: 05 18 05 00 04 04 03 03 0a 01 00 01 00 01 04 06
Data 10: 00 07 00 08 00 09 00 04
Type 6 Record: #6
Data 00: 06 0c 06 00 01 01 00 01 00 8a 8a 00
String 1: "A0"
Type 6 Record: #7
Data 00: 06 0c 07 00 01 23 00 01 00 8a 8a 00
String 1: "A1"
Type 6 Record: #8
Data 00: 06 0c 08 00 01 ff 00 02 00 7f 7f 00
String 1: "A2"
Type 6 Record: #9
Data 00: 06 0c 09 00 01 ff 00 02 00 7f 7f 00
String 1: "A3"
Cache Info: #10
Designation: "Internal Cache"
Level: L1
State: Enabled
Mode: 0x01 (Write Back)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x02 (Unknown)
Type: 0x02 (Unknown)
Associativity: 0x02 (Unknown)
Max. Size: 32 kB
Current Size: 32 kB
Supported SRAM Types: 0x0020 (Synchronous)
Current SRAM Type: 0x0020 (Synchronous)
Cache Info: #11
Designation: "External Cache"
Level: L2
State: Enabled
Mode: 0x01 (Write Back)
Location: 0x01 (External, Not Socketed)
ECC: 0x02 (Unknown)
Type: 0x02 (Unknown)
Associativity: 0x02 (Unknown)
Max. Size: 1024 kB
Current Size: 1024 kB
Supported SRAM Types: 0x0020 (Synchronous)
Current SRAM Type: 0x0020 (Synchronous)
Port Connector: #12
Type: 0xff (Other)
Internal Designator: "PRIMARY IDE"
Internal Connector: 0x16 (On Board IDE)
Port Connector: #13
Type: 0xff (Other)
Internal Designator: "SECONDARY IDE"
Internal Connector: 0x16 (On Board IDE)
Port Connector: #14
Type: 0xa1 (8251 FIFO Compatible)
Internal Designator: "FDD"
Internal Connector: 0x17 (On Board Floppy)
Port Connector: #15
Type: 0x07 (Serial Port 16450 Compatible)
Internal Designator: "COM1"
Internal Connector: 0x18 (9 Pin Dual Inline [pin 10 cut])
External Connector: 0x08 (DB-9 pin male)
Port Connector: #16
Type: 0x07 (Serial Port 16450 Compatible)
Internal Designator: "COM2"
Internal Connector: 0x18 (9 Pin Dual Inline [pin 10 cut])
External Connector: 0x08 (DB-9 pin male)
Port Connector: #17
Type: 0x05 (Parallel Port ECP/EPP)
Internal Designator: "LPT1"
Internal Connector: 0x05 (DB-25 pin female)
External Connector: 0x05 (DB-25 pin female)
Port Connector: #18
Type: 0x0d (Keyboard Port)
Internal Designator: "Keyboard"
Internal Connector: 0x0f (PS/2)
External Connector: 0x0f (PS/2)
Port Connector: #19
Type: 0x0e (Mouse Port)
Internal Designator: "PS/2 Mouse"
Internal Connector: 0x0f (PS/2)
External Connector: 0x0f (PS/2)
Port Connector: #20
Type: 0x10 (USB)
External Designator: "USB0"
External Connector: 0xff (Other)
Port Connector: #21
Type: 0x10 (USB)
External Designator: "USB1"
External Connector: 0xff (Other)
System Slot: #22
Designation: "PCI0"
Type: 0x06 (PCI)
Bus Width: 0x05 (32 bit)
Status: 0x03 (Available)
Length: 0x04 (Long)
Slot ID: 1
Characteristics: 0x0102 (5.0 V, PME#)
System Slot: #23
Designation: "PCI1"
Type: 0x06 (PCI)
Bus Width: 0x05 (32 bit)
Status: 0x03 (Available)
Length: 0x04 (Long)
Slot ID: 2
Characteristics: 0x0102 (5.0 V, PME#)
System Slot: #24
Designation: "PCI2"
Type: 0x06 (PCI)
Bus Width: 0x05 (32 bit)
Status: 0x03 (Available)
Length: 0x04 (Long)
Slot ID: 3
Characteristics: 0x0102 (5.0 V, PME#)
System Slot: #25
Designation: "PCI3"
Type: 0x06 (PCI)
Bus Width: 0x05 (32 bit)
Status: 0x03 (Available)
Length: 0x04 (Long)
Slot ID: 4
Characteristics: 0x0102 (5.0 V, PME#)
System Slot: #26
Designation: "AGP"
Type: 0x0f (AGP)
Bus Width: 0x05 (32 bit)
Status: 0x04 (In Use)
Length: 0x04 (Long)
Slot ID: 8
Characteristics: 0x0002 (5.0 V)
Language Info: #27
Languages: n|US|iso8859-1, n|US|iso8859-1, r|CA|iso8859-1, a|JP|unicode
Current: n|US|iso8859-1
Physical Memory Array: #28
Use: 0x03 (System memory)
Location: 0x03 (Motherboard)
Slots: 4
Max. Size: 4 GB
ECC: 0x03 (None)
Memory Device: #29
Location: "A0"
Bank: "Bank0/1"
Memory Array: #28
Form Factor: 0x09 (DIMM)
Type: 0x0f (SDRAM)
Type Detail: 0x0080 (Synchronous)
Data Width: 64 bits
Size: 1 GB
Memory Device: #30
Location: "A1"
Bank: "Bank2/3"
Memory Array: #28
Form Factor: 0x09 (DIMM)
Type: 0x0f (SDRAM)
Type Detail: 0x0080 (Synchronous)
Data Width: 64 bits
Size: 1 GB
Memory Device: #31
Location: "A2"
Bank: "Bank4/5"
Memory Array: #28
Form Factor: 0x09 (DIMM)
Type: 0x02 (Unknown)
Type Detail: 0x0004 (Unknown)
Data Width: 0 bits
Size: No Memory Installed
Memory Device: #32
Location: "A3"
Bank: "Bank6/7"
Memory Array: #28
Form Factor: 0x09 (DIMM)
Type: 0x02 (Unknown)
Type Detail: 0x0004 (Unknown)
Data Width: 0 bits
Size: No Memory Installed
Memory Array Mapping: #33
Memory Array: #28
Partition Width: 1
Start Address: 0x00000000
End Address: 0x80000000
Memory Device Mapping: #34
Memory Device: #29
Array Mapping: #33
Row: 1
Interleave Pos: 0
Interleaved Depth: 0
Start Address: 0x00000000
End Address: 0x40000000
Memory Device Mapping: #35
Memory Device: #30
Array Mapping: #33
Row: 1
Interleave Pos: 0
Interleaved Depth: 0
Start Address: 0x40000000
End Address: 0x80000000
Memory Device Mapping: #36
Memory Device: #31
Array Mapping: #33
Row: 1
Interleave Pos: 0
Interleaved Depth: 0
Start Address: 0x00000000
End Address: 0x00000400
Memory Device Mapping: #37
Memory Device: #32
Array Mapping: #33
Row: 1
Interleave Pos: 0
Interleaved Depth: 0
Start Address: 0x00000000
End Address: 0x00000400
Type 32 Record: #38
Data 00: 20 0b 26 00 00 00 00 00 00 00 00
Config Status: cfg=new, avail=yes, need=no, active=unknown
*******************************************************************
* SYSTEM HARDWARE INFO: additional (by discover) *
*******************************************************************
Skipping multiple lines with the same content:
Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
VIA Technologies, Inc. VT6421 IDE RAID Controller
ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary)
ATI Technologies Inc RV280 [Radeon 9200 SE]
Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller
Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
Intel Corporation 82801 PCI Bridge
Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
Intel Corporation 82865G/PE/P Processor to I/O Memory Interface
Intel Corporation 82865G/PE/P PCI to AGP Controller
Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface
*******************************************************
* CONFIGURATION FILE STATES: /etc/fstab *
*******************************************************
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# Following: relevant information
# (options changed in the meanwhile: got rid of additional
nodev,noexec; added relatime)
# "Images" partition on WD 2500JB (/dev/sdd1)
UUID=65ea7ee2-193d-4094-a58e-dcb14ed51aaa
/mnt/Images.src ext4 user,nodev,noexec,noauto,relatime 0 0
# "Resources" partition on WD 2500JB (/dev/sdd2)
UUID=5452a438-4b62-48b0-8b9b-cb5a3ffc9eac /mnt/Resources.src
ext4 user,nodev,noexec,noauto,relatime 0 0
# "User Backup" partition on WD 2500JB (/dev/sdd3)
UUID=4817ae60-002b-45b7-9a45-a4a35d05c657 /var/backups/user
ext4 user,nodev,noexec,noauto,relatime 0 0
# "Partition Backup" partition on WD 2500JB (/dev/sdd4) is DISABLED at
mountpoint (solely used by Clonezilla)
UUID=887b7f81-0e96-4a0d-8846-fc3774ccda06 /var/backups/partition
ext4 ro,nodev,noexec,noauto 0 0
*******************************************************
* CONFIGURATION FILE STATES: /etc/mtab *
*******************************************************
2 invalid lines; these device nodes did not exist at the moment I
tried to 'umount' them:
/dev/sdd1 /mnt/Images.src ext4 rw,noexec,nosuid,nodev,relatime 0 0
/dev/sdd2 /mnt/Resources.src ext4 rw,noexec,nosuid,nodev,relatime 0 0
**************************************************************
* LOG FILE CONTENTS: syslog (previous session) *
**************************************************************
Oct 6 21:38:12 localhost hald[1823]: forcibly attempting to lazy
unmount /dev/sdd1 as enclosing drive was disconnected
Oct 6 21:38:12 localhost hald: unmounted /dev/sdd1 from '/media/disk'
on behalf of uid 0
**************************************************************
* LOG FILE CONTENTS: syslog (previous session) *
**************************************************************
kernel: [54073.006047] EXT4-fs error (device sde3): ext4_readdir:
directory #2 contains a hole at offset 0
kernel: [54073.006062] EXT4-fs (sde3): previous I/O error to superblock detected
kernel: [54073.346303] EXT4-fs error (device sdf1): ext4_readdir:
directory #188930 contains a hole at offset 0
kernel: [54079.000142] Aborting journal on device sdf1-8.
kernel: [54079.000173] JBD2: I/O error detected when updating journal
superblock for sdf1-8.
kernel: [54079.776082] EXT4-fs error (device sdf1): ext4_readdir:
directory #76291 contains a hole at offset 0
kernel: [54079.776109] EXT4-fs (sdf1): previous I/O error to superblock detected
kernel: [54079.776517] EXT4-fs error (device sdf1): ext4_readdir:
directory #11 contains a hole at offset 0
kernel: [54079.776535] EXT4-fs (sdf1): previous I/O error to superblock detected
kernel: [54079.776816] EXT4-fs error (device sdf1): ext4_readdir:
directory #188930 contains a hole at offset 0
kernel: [54079.776837] EXT4-fs (sdf1): previous I/O error to superblock detected
kernel: [54080.182431] EXT4-fs error (device sde3): ext4_readdir:
directory #2 contains a hole at offset 0
kernel: [54080.182449] EXT4-fs (sde3): previous I/O error to superblock detected
popularity-contest: unable to submit report to
http://popcon.debian.org/cgi-bin/popcon.cgi.
kernel: [54086.274731] EXT4-fs error (device sde3): ext4_find_entry:
reading directory #2 offset 0
kernel: [54086.274749] EXT4-fs (sde3): previous I/O error to superblock detected
kernel: [54086.299016] EXT4-fs error (device sdf1): ext4_readdir:
directory #11 contains a hole at offset 0
kernel: [54086.299035] EXT4-fs (sdf1): previous I/O error to superblock detected
kernel: [54086.303531] EXT4-fs error (device sdf1):
ext4_journal_start_sb: Detected aborted journal
kernel: [54086.303546] EXT4-fs (sdf1): Remounting filesystem read-only
kernel: [54086.306239] EXT4-fs error (device sdf2): ext4_find_entry:
reading directory #2 offset 0
kernel: [54086.306258] EXT4-fs (sdf2): previous I/O error to superblock detected
kernel: [54086.337652] EXT4-fs error (device sdf1): ext4_readdir:
directory #11 contains a hole at offset 0
(...)
kernel: [56990.903207] EXT4-fs error (device sde3): ext4_readdir:
directory #2 contains a hole at offset 0
kernel: [56990.903227] EXT4-fs (sde3): previous I/O error to superblock detected
kernel: [56990.904130] EXT4-fs error (device sde3): ext4_readdir:
directory #2 contains a hole at offset 0
kernel: [56990.904147] EXT4-fs (sde3): previous I/O error to superblock detected
acpid: client connected from 21233[0:0]
localhost acpid: 1 client rule loaded
acpid: client 1911[0:0] has disconnected
/USR/SBIN/CRON[423]: (root) CMD (command -v debian-sa1 > /dev/null &&
debian-sa1 1 1)
acpid: client 21233[0:0] has disconnected
acpid: client connected from 1911[0:0]
acpid: 1 client rule loaded
kernel: [57426.753841] usb 1-3: USB disconnect, address 6
kernel: [57526.156230] xfce4-sensors-p[4134]: segfault at c13c5c9c ip
b77015ab sp bfeb70d8 error 5 in libc-2.11.2.so[b7696000+140000]
shutdown[522]: shutting down for system reboot
localhost init: Switching to runlevel: 6
localhost kernel: [57527.051538] md: md1 still in use.
kernel: [57527.051751] md: md0 still in use.
kernel: [57527.052155] md: md1 still in use.
kernel: [57527.052426] md: md0 still in use.
kernel: [57527.724865] fuse exit
acpid: exiting
rpc.statd[1162]: Caught signal 15, un-registering and exiting
kernel: Kernel logging (proc) stopped.
rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1380"
x-info="http://www.rsyslog.com";] exiting on signal 15.
****************************************************************
* LOG FILE CONTENTS: kern.log (previous session) *
****************************************************************
In this part the usual error messages can be found.
Dumping the full log from the first connection, as the presence of 2
separate devices might make it a bit confusing.
Oct 6 15:54:32 localhost kernel: [ 1408.120023] usb 1-3: new high
speed USB device using ehci_hcd and address 2
Oct 6 15:54:32 localhost kernel: [ 1408.256284] usb 1-3: New USB
device found, idVendor=1005, idProduct=b113
Oct 6 15:54:32 localhost kernel: [ 1408.256292] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 6 15:54:32 localhost kernel: [ 1408.256297] usb 1-3: Product: USB
FLASH DRIVE
Oct 6 15:54:32 localhost kernel: [ 1408.256302] usb 1-3: Manufacturer:
Oct 6 15:54:32 localhost kernel: [ 1408.256306] usb 1-3:
SerialNumber: 196909000DF8
Oct 6 15:54:32 localhost kernel: [ 1408.256515] usb 1-3:
configuration #1 chosen from 1 choice
Oct 6 15:54:32 localhost kernel: [ 1408.340261] Initializing USB Mass
Storage driver...
Oct 6 15:54:32 localhost kernel: [ 1408.340510] scsi5 : SCSI
emulation for USB Mass Storage devices
Oct 6 15:54:32 localhost kernel: [ 1408.340887] usbcore: registered
new interface driver usb-storage
Oct 6 15:54:32 localhost kernel: [ 1408.340897] USB Mass Storage
support registered.
Oct 6 15:54:32 localhost kernel: [ 1408.343732] usb-storage: device found at 2
Oct 6 15:54:32 localhost kernel: [ 1408.343739] usb-storage: waiting
for device to settle before scanning
Oct 6 15:54:37 localhost kernel: [ 1413.340232] usb-storage: device
scan complete
Oct 6 15:54:37 localhost kernel: [ 1413.340811] scsi 5:0:0:0:
Direct-Access USB FLASH DRIVE 34CH PQ: 0 ANSI: 0 CCS
Oct 6 15:54:37 localhost kernel: [ 1413.343114] sd 5:0:0:0: Attached
scsi generic sg5 type 0
Oct 6 15:54:38 localhost kernel: [ 1413.986212] sd 5:0:0:0: [sdd]
4030464 512-byte logical blocks: (2.06 GB/1.92 GiB)
Oct 6 15:54:38 localhost kernel: [ 1413.986696] sd 5:0:0:0: [sdd]
Write Protect is off
Oct 6 15:54:38 localhost kernel: [ 1413.986703] sd 5:0:0:0: [sdd]
Mode Sense: 23 00 00 00
Oct 6 15:54:38 localhost kernel: [ 1413.986708] sd 5:0:0:0: [sdd]
Assuming drive cache: write through
Oct 6 15:54:38 localhost kernel: [ 1413.988946] sd 5:0:0:0: [sdd]
Assuming drive cache: write through
Oct 6 15:54:38 localhost kernel: [ 1413.988956] sdd: sdd1
Oct 6 15:54:38 localhost kernel: [ 1413.992345] sd 5:0:0:0: [sdd]
Assuming drive cache: write through
Oct 6 15:54:38 localhost kernel: [ 1413.992357] sd 5:0:0:0: [sdd]
Attached SCSI removable disk
Oct 6 15:54:38 localhost kernel: [ 1414.512668] FAT: utf8 is not a
recommended IO charset for FAT filesystems, filesystem will be case
sensitive!
Oct 6 16:13:55 localhost kernel: [ 2570.837510] UDF-fs: No VRS found
Oct 6 16:13:55 localhost kernel: [ 2570.837517] UDF-fs: No partition found (1)
Oct 6 16:13:55 localhost kernel: [ 2570.850079] ISO 9660 Extensions:
Microsoft Joliet Level 3
Oct 6 16:13:55 localhost kernel: [ 2570.855117] ISO 9660 Extensions: RRIP_1991A
Oct 6 17:37:31 localhost kernel: [ 7587.182781] eth0: link down
Oct 6 17:37:33 localhost kernel: [ 7588.810687] eth0: link up,
100Mbps, full-duplex, lpa 0x45E1
Oct 6 17:37:44 localhost kernel: [ 7600.042686] eth0: link down
Oct 6 17:37:45 localhost kernel: [ 7601.144946] eth0: link down
Oct 6 17:37:45 localhost kernel: [ 7601.145459] ADDRCONF(NETDEV_UP):
eth0: link is not ready
Oct 6 17:37:45 localhost kernel: [ 7601.247026] eth0: link down
Oct 6 17:37:45 localhost kernel: [ 7601.247288] ADDRCONF(NETDEV_UP):
eth0: link is not ready
Oct 6 17:37:46 localhost kernel: [ 7601.709091] eth0: link up,
100Mbps, full-duplex, lpa 0x45E1
Oct 6 17:37:46 localhost kernel: [ 7601.709338]
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 6 17:37:51 localhost kernel: [ 7606.723694] eth0: link up,
100Mbps, full-duplex, lpa 0x45E1
Oct 6 17:37:51 localhost kernel: [ 7606.783874] eth0: link up,
100Mbps, full-duplex, lpa 0x45E1
Oct 6 17:38:01 localhost kernel: [ 7616.944015] eth0: no IPv6 routers present
Oct 6 18:07:47 localhost kernel: [ 9402.769816] SGI XFS with ACLs,
security attributes, realtime, large block/inode numbers, no debug
enabled
Oct 6 18:07:47 localhost kernel: [ 9402.773846] SGI XFS Quota
Management subsystem
Oct 6 18:07:47 localhost kernel: [ 9402.786074] JFS: nTxBlock = 8192,
nTxLock = 65536
Oct 6 18:07:47 localhost kernel: [ 9402.813483] NTFS driver 2.1.29
[Flags: R/W MODULE].
Oct 6 18:07:47 localhost kernel: [ 9402.845489] QNX4 filesystem 0.2.3
registered.
Oct 6 18:07:47 localhost kernel: [ 9402.890005] Btrfs loaded
Oct 6 18:07:48 localhost kernel: [ 9404.176284] FAT: utf8 is not a
recommended IO charset for FAT filesystems, filesystem will be case
sensitive!
Oct 6 18:07:48 localhost kernel: [ 9404.437421] FAT: utf8 is not a
recommended IO charset for FAT filesystems, filesystem will be case
sensitive!
Oct 6 18:07:49 localhost kernel: [ 9404.768949] kjournald starting.
Commit interval 5 seconds
Oct 6 18:07:49 localhost kernel: [ 9404.768991] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 6 18:07:49 localhost kernel: [ 9405.048013] FAT: utf8 is not a
recommended IO charset for FAT filesystems, filesystem will be case
sensitive!
Oct 6 19:48:46 localhost kernel: [15462.112031] usb 1-4: new high
speed USB device using ehci_hcd and address 3
Oct 6 19:48:46 localhost kernel: [15462.248176] usb 1-4: New USB
device found, idVendor=1058, idProduct=0901
Oct 6 19:48:46 localhost kernel: [15462.248184] usb 1-4: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 6 19:48:46 localhost kernel: [15462.248190] usb 1-4: Product: External HDD
Oct 6 19:48:46 localhost kernel: [15462.248194] usb 1-4:
Manufacturer: Western Digital
Oct 6 19:48:46 localhost kernel: [15462.248198] usb 1-4:
SerialNumber: 57442D5743414E4B43383633333636
Oct 6 19:48:46 localhost kernel: [15462.248416] usb 1-4:
configuration #1 chosen from 1 choice
Oct 6 19:48:46 localhost kernel: [15462.249077] scsi6 : SCSI
emulation for USB Mass Storage devices
Oct 6 19:48:46 localhost kernel: [15462.249562] usb-storage: device found at 3
Oct 6 19:48:46 localhost kernel: [15462.249569] usb-storage: waiting
for device to settle before scanning
Oct 6 19:48:51 localhost kernel: [15467.249256] usb-storage: device
scan complete
Oct 6 19:48:51 localhost kernel: [15467.284602] scsi 6:0:0:0:
Direct-Access WD 2500JB External 0108 PQ: 0 ANSI: 0
Oct 6 19:48:51 localhost kernel: [15467.286084] sd 6:0:0:0: Attached
scsi generic sg6 type 0
Oct 6 19:48:51 localhost kernel: [15467.287702] sd 6:0:0:0: [sde]
488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 6 19:48:51 localhost kernel: [15467.288570] sd 6:0:0:0: [sde]
Write Protect is off
Oct 6 19:48:51 localhost kernel: [15467.288582] sd 6:0:0:0: [sde]
Mode Sense: 03 00 00 00
Oct 6 19:48:51 localhost kernel: [15467.288589] sd 6:0:0:0: [sde]
Assuming drive cache: write through
Oct 6 19:48:51 localhost kernel: [15467.297478] sd 6:0:0:0: [sde]
Assuming drive cache: write through
Oct 6 19:48:51 localhost kernel: [15467.297495] sde: sde1 sde2 sde3 sde4
Oct 6 19:48:51 localhost kernel: [15467.306208] sd 6:0:0:0: [sde]
Assuming drive cache: write through
Oct 6 19:48:51 localhost kernel: [15467.306224] sd 6:0:0:0: [sde]
Attached SCSI disk
Oct 6 19:49:54 localhost kernel: [15530.501959] EXT4-fs (sde3):
mounted filesystem with ordered data mode
Oct 6 20:01:26 localhost kernel: [16221.812945] EXT4-fs (sde1):
mounted filesystem with ordered data mode
Oct 6 20:01:28 localhost kernel: [16223.670524] EXT4-fs (sde2):
mounted filesystem with ordered data mode
Oct 6 20:42:54 localhost kernel: [18710.370927] usb 1-4: USB
disconnect, address 3
Oct 6 20:42:54 localhost kernel: [18710.391186] sd 6:0:0:0: [sde]
Unhandled error code
Oct 6 20:42:54 localhost kernel: [18710.391197] sd 6:0:0:0: [sde]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Oct 6 20:42:54 localhost kernel: [18710.391210] sd 6:0:0:0: [sde]
CDB: Read(10): 28 00 00 23 9e 41 00 00 40 00
Oct 6 20:42:54 localhost kernel: [18710.391237] end_request: I/O
error, dev sde, sector 2334273
Oct 6 20:42:54 localhost kernel: [18710.391385] sd 6:0:0:0: [sde]
Unhandled error code
Oct 6 20:42:54 localhost kernel: [18710.391392] sd 6:0:0:0: [sde]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Oct 6 20:42:54 localhost kernel: [18710.391401] sd 6:0:0:0: [sde]
CDB: Read(10): 28 00 00 23 9e 81 00 00 40 00
Oct 6 20:42:54 localhost kernel: [18710.391424] end_request: I/O
error, dev sde, sector 2334337
Oct 6 20:42:55 localhost kernel: [18711.004039] usb 1-4: new high
speed USB device using ehci_hcd and address 4
Oct 6 20:42:55 localhost kernel: [18711.140147] usb 1-4: New USB
device found, idVendor=1058, idProduct=0901
Oct 6 20:42:55 localhost kernel: [18711.140155] usb 1-4: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 6 20:42:55 localhost kernel: [18711.140160] usb 1-4: Product: External HDD
Oct 6 20:42:55 localhost kernel: [18711.140165] usb 1-4:
Manufacturer: Western Digital
Oct 6 20:42:55 localhost kernel: [18711.140169] usb 1-4:
SerialNumber: 57442D5743414E4B43383633333636
Oct 6 20:42:55 localhost kernel: [18711.140387] usb 1-4:
configuration #1 chosen from 1 choice
Oct 6 20:42:55 localhost kernel: [18711.140875] scsi7 : SCSI
emulation for USB Mass Storage devices
Oct 6 20:42:55 localhost kernel: [18711.141363] usb-storage: device found at 4
Oct 6 20:42:55 localhost kernel: [18711.141369] usb-storage: waiting
for device to settle before scanning
Oct 6 20:43:00 localhost kernel: [18716.140344] usb-storage: device
scan complete
Oct 6 20:43:00 localhost kernel: [18716.175695] scsi 7:0:0:0:
Direct-Access WD 2500JB External 0108 PQ: 0 ANSI: 0
Oct 6 20:43:00 localhost kernel: [18716.177370] sd 7:0:0:0: Attached
scsi generic sg6 type 0
Oct 6 20:43:00 localhost kernel: [18716.178801] sd 7:0:0:0: [sdf]
488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 6 20:43:00 localhost kernel: [18716.179663] sd 7:0:0:0: [sdf]
Write Protect is off
Oct 6 20:43:00 localhost kernel: [18716.179674] sd 7:0:0:0: [sdf]
Mode Sense: 03 00 00 00
Oct 6 20:43:00 localhost kernel: [18716.179681] sd 7:0:0:0: [sdf]
Assuming drive cache: write through
Oct 6 20:43:00 localhost kernel: [18716.187941] sd 7:0:0:0: [sdf]
Assuming drive cache: write through
Oct 6 20:43:00 localhost kernel: [18716.187964] sdf: sdf1 sdf2 sdf3 sdf4
Oct 6 20:43:00 localhost kernel: [18716.201435] sd 7:0:0:0: [sdf]
Assuming drive cache: write through
Oct 6 20:43:00 localhost kernel: [18716.201452] sd 7:0:0:0: [sdf]
Attached SCSI disk
Oct 6 20:43:01 localhost kernel: [18716.975248] EXT4-fs error (device
sde2): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.975342] EXT4-fs error (device
sde2): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.975355] EXT4-fs (sde2):
previous I/O error to superblock detected
Oct 6 20:43:01 localhost kernel: [18716.975437] EXT4-fs error (device
sde1): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.975501] EXT4-fs error (device
sde1): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.975516] EXT4-fs (sde1):
previous I/O error to superblock detected
Oct 6 20:43:01 localhost kernel: [18716.975596] EXT4-fs error (device
sde3): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.975663] EXT4-fs error (device
sde3): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.975674] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 6 20:43:01 localhost kernel: [18716.985774] EXT4-fs error (device
sde2): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.985794] EXT4-fs (sde2):
previous I/O error to superblock detected
Oct 6 20:43:01 localhost kernel: [18716.985964] EXT4-fs error (device
sde1): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.985978] EXT4-fs (sde1):
previous I/O error to superblock detected
Oct 6 20:43:01 localhost kernel: [18716.986076] EXT4-fs error (device
sde3): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.986089] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 6 20:43:01 localhost kernel: [18716.989130] EXT4-fs error (device
sde2): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.989147] EXT4-fs (sde2):
previous I/O error to superblock detected
Oct 6 20:43:01 localhost kernel: [18716.990115] EXT4-fs error (device
sde1): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.990130] EXT4-fs (sde1):
previous I/O error to superblock detected
Oct 6 20:43:01 localhost kernel: [18716.990268] EXT4-fs error (device
sde3): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:43:01 localhost kernel: [18716.990280] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 6 20:49:59 localhost kernel: [19135.404466] EXT4-fs error (device
sde1): ext4_find_entry: reading directory #2 offset 0
Oct 6 20:49:59 localhost kernel: [19135.404485] EXT4-fs (sde1):
previous I/O error to superblock detected
Oct 6 20:53:15 localhost kernel: [19331.256081] usb 1-4: USB
disconnect, address 4
Oct 6 21:20:06 localhost kernel: [20941.708036] usb 1-4: new high
speed USB device using ehci_hcd and address 5
Oct 6 21:20:06 localhost kernel: [20941.844152] usb 1-4: New USB
device found, idVendor=1058, idProduct=0901
Oct 6 21:20:06 localhost kernel: [20941.844160] usb 1-4: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 6 21:20:06 localhost kernel: [20941.844166] usb 1-4: Product: External HDD
Oct 6 21:20:06 localhost kernel: [20941.844170] usb 1-4:
Manufacturer: Western Digital
Oct 6 21:20:06 localhost kernel: [20941.844175] usb 1-4:
SerialNumber: 57442D5743414E4B43383633333636
Oct 6 21:20:06 localhost kernel: [20941.844399] usb 1-4:
configuration #1 chosen from 1 choice
Oct 6 21:20:06 localhost kernel: [20941.845035] scsi8 : SCSI
emulation for USB Mass Storage devices
Oct 6 21:20:06 localhost kernel: [20941.845474] usb-storage: device found at 5
Oct 6 21:20:06 localhost kernel: [20941.845480] usb-storage: waiting
for device to settle before scanning
Oct 6 21:20:11 localhost kernel: [20946.844349] usb-storage: device
scan complete
Oct 6 21:20:11 localhost kernel: [20946.879595] scsi 8:0:0:0:
Direct-Access WD 2500JB External 0108 PQ: 0 ANSI: 0
Oct 6 21:20:11 localhost kernel: [20946.882420] sd 8:0:0:0: Attached
scsi generic sg6 type 0
Oct 6 21:20:11 localhost kernel: [20946.906045] sd 8:0:0:0: [sdf]
488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 6 21:20:11 localhost kernel: [20946.908661] sd 8:0:0:0: [sdf]
Write Protect is off
Oct 6 21:20:11 localhost kernel: [20946.908674] sd 8:0:0:0: [sdf]
Mode Sense: 03 00 00 00
Oct 6 21:20:11 localhost kernel: [20946.908682] sd 8:0:0:0: [sdf]
Assuming drive cache: write through
Oct 6 21:20:11 localhost kernel: [20946.911289] sd 8:0:0:0: [sdf]
Assuming drive cache: write through
Oct 6 21:20:11 localhost kernel: [20946.911305] sdf: sdf1 sdf2 sdf3 sdf4
Oct 6 21:20:11 localhost kernel: [20946.921330] sd 8:0:0:0: [sdf]
Assuming drive cache: write through
Oct 6 21:20:11 localhost kernel: [20946.921344] sd 8:0:0:0: [sdf]
Attached SCSI disk
Oct 6 21:22:32 localhost kernel: [21087.751607] EXT4-fs (sdf1):
recovery complete
Oct 6 21:22:32 localhost kernel: [21087.752519] EXT4-fs (sdf1):
mounted filesystem with ordered data mode
Oct 6 21:22:33 localhost kernel: [21089.358689] EXT4-fs (sdf2):
recovery complete
Oct 6 21:22:33 localhost kernel: [21089.359267] EXT4-fs (sdf2):
mounted filesystem with ordered data mode
Oct 6 21:38:11 localhost kernel: [22027.625503] usb 1-3: USB
disconnect, address 2
Oct 6 21:38:12 localhost kernel: [22027.700459] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.700470] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.700481] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 81 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.700508] end_request: I/O
error, dev sdf, sector 15857281
Oct 6 21:38:12 localhost kernel: [22027.700690] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.700699] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.700709] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 89 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.700734] end_request: I/O
error, dev sdf, sector 15857289
Oct 6 21:38:12 localhost kernel: [22027.702178] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.702189] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.702199] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 91 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.702229] end_request: I/O
error, dev sdf, sector 15857297
Oct 6 21:38:12 localhost kernel: [22027.702579] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.702588] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.702598] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 99 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.702626] end_request: I/O
error, dev sdf, sector 15857305
Oct 6 21:38:12 localhost kernel: [22027.702751] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.702759] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.702768] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 a1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.702794] end_request: I/O
error, dev sdf, sector 15857313
Oct 6 21:38:12 localhost kernel: [22027.702915] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.702922] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.702931] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 a9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.702956] end_request: I/O
error, dev sdf, sector 15857321
Oct 6 21:38:12 localhost kernel: [22027.703081] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.703088] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.703098] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 b1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.703123] end_request: I/O
error, dev sdf, sector 15857329
Oct 6 21:38:12 localhost kernel: [22027.703242] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.703248] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.703258] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 b9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.703283] end_request: I/O
error, dev sdf, sector 15857337
Oct 6 21:38:12 localhost kernel: [22027.703401] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.703409] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.703418] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 c1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.703443] end_request: I/O
error, dev sdf, sector 15857345
Oct 6 21:38:12 localhost kernel: [22027.703568] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.703575] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.703584] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 c9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.703609] end_request: I/O
error, dev sdf, sector 15857353
Oct 6 21:38:12 localhost kernel: [22027.703729] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.703736] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.703745] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 d1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.703771] end_request: I/O
error, dev sdf, sector 15857361
Oct 6 21:38:12 localhost kernel: [22027.703887] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.703894] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.703903] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 d9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.703929] end_request: I/O
error, dev sdf, sector 15857369
Oct 6 21:38:12 localhost kernel: [22027.704044] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.704051] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.704060] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 e1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.704085] end_request: I/O
error, dev sdf, sector 15857377
Oct 6 21:38:12 localhost kernel: [22027.704202] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.704210] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.704219] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 e9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.704245] end_request: I/O
error, dev sdf, sector 15857385
Oct 6 21:38:12 localhost kernel: [22027.704364] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.704371] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.704380] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 f1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.704405] end_request: I/O
error, dev sdf, sector 15857393
Oct 6 21:38:12 localhost kernel: [22027.704527] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.704534] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.704543] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 f9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.704565] end_request: I/O
error, dev sdf, sector 15857401
Oct 6 21:38:12 localhost kernel: [22027.704685] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.704692] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.704702] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 01 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.704727] end_request: I/O
error, dev sdf, sector 15857409
Oct 6 21:38:12 localhost kernel: [22027.704849] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.704856] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.704865] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 09 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.704890] end_request: I/O
error, dev sdf, sector 15857417
Oct 6 21:38:12 localhost kernel: [22027.706114] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.706122] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.706131] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 11 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.706157] end_request: I/O
error, dev sdf, sector 15857425
Oct 6 21:38:12 localhost kernel: [22027.706286] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.706293] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.706302] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 19 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.706326] end_request: I/O
error, dev sdf, sector 15857433
Oct 6 21:38:12 localhost kernel: [22027.706446] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.706454] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.706464] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 21 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.706488] end_request: I/O
error, dev sdf, sector 15857441
Oct 6 21:38:12 localhost kernel: [22027.708987] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.708998] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.709034] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 29 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.709062] end_request: I/O
error, dev sdf, sector 15857449
Oct 6 21:38:12 localhost kernel: [22027.709501] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.709509] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.709518] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 31 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.709543] end_request: I/O
error, dev sdf, sector 15857457
Oct 6 21:38:12 localhost kernel: [22027.709665] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.709672] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.709681] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 39 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.709706] end_request: I/O
error, dev sdf, sector 15857465
Oct 6 21:38:12 localhost kernel: [22027.709826] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.709833] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.709843] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 41 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.709868] end_request: I/O
error, dev sdf, sector 15857473
Oct 6 21:38:12 localhost kernel: [22027.709988] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.709995] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.710004] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 49 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.710029] end_request: I/O
error, dev sdf, sector 15857481
Oct 6 21:38:12 localhost kernel: [22027.710149] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.710155] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.710164] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 51 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.710189] end_request: I/O
error, dev sdf, sector 15857489
Oct 6 21:38:12 localhost kernel: [22027.710307] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.710314] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.710323] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 59 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.710347] end_request: I/O
error, dev sdf, sector 15857497
Oct 6 21:38:12 localhost kernel: [22027.710468] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.710475] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.710483] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 61 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.710508] end_request: I/O
error, dev sdf, sector 15857505
Oct 6 21:38:12 localhost kernel: [22027.710613] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.710620] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.710629] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 69 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.710654] end_request: I/O
error, dev sdf, sector 15857513
Oct 6 21:38:12 localhost kernel: [22027.710759] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.710766] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.710775] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 71 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.710800] end_request: I/O
error, dev sdf, sector 15857521
Oct 6 21:38:12 localhost kernel: [22027.710903] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.710910] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.710919] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 79 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.710944] end_request: I/O
error, dev sdf, sector 15857529
Oct 6 21:38:12 localhost kernel: [22027.711047] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.711054] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.711063] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 81 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.711087] end_request: I/O
error, dev sdf, sector 15857537
Oct 6 21:38:12 localhost kernel: [22027.711192] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.711199] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.711208] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 89 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.711232] end_request: I/O
error, dev sdf, sector 15857545
Oct 6 21:38:12 localhost kernel: [22027.711337] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.711344] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.711353] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 91 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.711379] end_request: I/O
error, dev sdf, sector 15857553
Oct 6 21:38:12 localhost kernel: [22027.711485] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.711492] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.711501] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 99 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.711526] end_request: I/O
error, dev sdf, sector 15857561
Oct 6 21:38:12 localhost kernel: [22027.711627] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.711643] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.711663] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 a1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.711688] end_request: I/O
error, dev sdf, sector 15857569
Oct 6 21:38:12 localhost kernel: [22027.711782] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.711789] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.711797] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 a9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.711822] end_request: I/O
error, dev sdf, sector 15857577
Oct 6 21:38:12 localhost kernel: [22027.711911] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.711917] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.711926] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 b1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.711950] end_request: I/O
error, dev sdf, sector 15857585
Oct 6 21:38:12 localhost kernel: [22027.712041] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.712047] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.712056] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 b9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.712080] end_request: I/O
error, dev sdf, sector 15857593
Oct 6 21:38:12 localhost kernel: [22027.712175] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.712182] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.712191] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 c1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.712216] end_request: I/O
error, dev sdf, sector 15857601
Oct 6 21:38:12 localhost kernel: [22027.712668] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.712676] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.712684] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 c9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.712708] end_request: I/O
error, dev sdf, sector 15857609
Oct 6 21:38:12 localhost kernel: [22027.712823] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.712832] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.712841] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 d1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.712866] end_request: I/O
error, dev sdf, sector 15857617
Oct 6 21:38:12 localhost kernel: [22027.714540] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.714549] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.714558] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 d9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.714586] end_request: I/O
error, dev sdf, sector 15857625
Oct 6 21:38:12 localhost kernel: [22027.715298] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.715306] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.715316] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 e1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.715342] end_request: I/O
error, dev sdf, sector 15857633
Oct 6 21:38:12 localhost kernel: [22027.715451] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.715458] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.715469] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 e9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.715495] end_request: I/O
error, dev sdf, sector 15857641
Oct 6 21:38:12 localhost kernel: [22027.715599] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.715606] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.715615] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 f1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.715642] end_request: I/O
error, dev sdf, sector 15857649
Oct 6 21:38:12 localhost kernel: [22027.715748] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.715755] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.715764] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f7 f9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.715790] end_request: I/O
error, dev sdf, sector 15857657
Oct 6 21:38:12 localhost kernel: [22027.715895] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.715902] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.715911] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 01 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.715936] end_request: I/O
error, dev sdf, sector 15857665
Oct 6 21:38:12 localhost kernel: [22027.716040] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.716047] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.716056] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 09 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.716082] end_request: I/O
error, dev sdf, sector 15857673
Oct 6 21:38:12 localhost kernel: [22027.716187] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.716194] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.716203] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 11 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.716228] end_request: I/O
error, dev sdf, sector 15857681
Oct 6 21:38:12 localhost kernel: [22027.716332] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.716339] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.716349] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 19 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.716373] end_request: I/O
error, dev sdf, sector 15857689
Oct 6 21:38:12 localhost kernel: [22027.716478] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.716485] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.716494] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 21 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.716521] end_request: I/O
error, dev sdf, sector 15857697
Oct 6 21:38:12 localhost kernel: [22027.718441] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.718450] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.718459] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 29 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.718484] end_request: I/O
error, dev sdf, sector 15857705
Oct 6 21:38:12 localhost kernel: [22027.718592] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.718598] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.718607] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 31 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.718630] end_request: I/O
error, dev sdf, sector 15857713
Oct 6 21:38:12 localhost kernel: [22027.718720] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.718727] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.718735] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 39 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.718757] end_request: I/O
error, dev sdf, sector 15857721
Oct 6 21:38:12 localhost kernel: [22027.718847] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.718854] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.718863] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 41 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.718889] end_request: I/O
error, dev sdf, sector 15857729
Oct 6 21:38:12 localhost kernel: [22027.718990] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.718998] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.719008] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 49 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.719033] end_request: I/O
error, dev sdf, sector 15857737
Oct 6 21:38:12 localhost kernel: [22027.719143] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.719151] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.719161] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 51 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.719187] end_request: I/O
error, dev sdf, sector 15857745
Oct 6 21:38:12 localhost kernel: [22027.719288] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.719296] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.719305] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 59 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.719331] end_request: I/O
error, dev sdf, sector 15857753
Oct 6 21:38:12 localhost kernel: [22027.719438] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.719446] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.719455] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 61 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.719481] end_request: I/O
error, dev sdf, sector 15857761
Oct 6 21:38:12 localhost kernel: [22027.719584] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.719591] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.719600] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 69 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.719625] end_request: I/O
error, dev sdf, sector 15857769
Oct 6 21:38:12 localhost kernel: [22027.719726] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.719733] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.719743] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 71 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.719768] end_request: I/O
error, dev sdf, sector 15857777
Oct 6 21:38:12 localhost kernel: [22027.719874] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.719883] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.719892] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 79 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.719917] end_request: I/O
error, dev sdf, sector 15857785
Oct 6 21:38:12 localhost kernel: [22027.720017] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.720024] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.720033] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 81 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.720056] end_request: I/O
error, dev sdf, sector 15857793
Oct 6 21:38:12 localhost kernel: [22027.720152] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.720159] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.720167] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 89 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.720190] end_request: I/O
error, dev sdf, sector 15857801
Oct 6 21:38:12 localhost kernel: [22027.720292] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.720299] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.720307] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 91 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.720332] end_request: I/O
error, dev sdf, sector 15857809
Oct 6 21:38:12 localhost kernel: [22027.720435] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.720443] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.720452] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 99 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.720477] end_request: I/O
error, dev sdf, sector 15857817
Oct 6 21:38:12 localhost kernel: [22027.720581] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.720588] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.720597] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 a1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.720623] end_request: I/O
error, dev sdf, sector 15857825
Oct 6 21:38:12 localhost kernel: [22027.720724] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.720730] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.720739] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 a9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.720764] end_request: I/O
error, dev sdf, sector 15857833
Oct 6 21:38:12 localhost kernel: [22027.720867] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.720874] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.720883] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 b1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.720907] end_request: I/O
error, dev sdf, sector 15857841
Oct 6 21:38:12 localhost kernel: [22027.722201] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.722208] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.722217] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 b9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.722242] end_request: I/O
error, dev sdf, sector 15857849
Oct 6 21:38:12 localhost kernel: [22027.722352] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.722358] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.722368] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 c1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.722392] end_request: I/O
error, dev sdf, sector 15857857
Oct 6 21:38:12 localhost kernel: [22027.722496] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.722503] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.722512] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 c9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.722537] end_request: I/O
error, dev sdf, sector 15857865
Oct 6 21:38:12 localhost kernel: [22027.722643] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.722650] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.722659] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 d1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.722684] end_request: I/O
error, dev sdf, sector 15857873
Oct 6 21:38:12 localhost kernel: [22027.722788] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.722796] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.722806] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 d9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.722831] end_request: I/O
error, dev sdf, sector 15857881
Oct 6 21:38:12 localhost kernel: [22027.722935] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.722942] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.722951] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 e1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.722976] end_request: I/O
error, dev sdf, sector 15857889
Oct 6 21:38:12 localhost kernel: [22027.723079] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.723086] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.723095] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 e9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.723120] end_request: I/O
error, dev sdf, sector 15857897
Oct 6 21:38:12 localhost kernel: [22027.723223] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.723230] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.723239] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 f1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.723264] end_request: I/O
error, dev sdf, sector 15857905
Oct 6 21:38:12 localhost kernel: [22027.723365] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.723372] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.723381] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f8 f9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.723406] end_request: I/O
error, dev sdf, sector 15857913
Oct 6 21:38:12 localhost kernel: [22027.723510] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.723517] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.723526] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 01 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.723550] end_request: I/O
error, dev sdf, sector 15857921
Oct 6 21:38:12 localhost kernel: [22027.723656] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.723662] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.723672] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 09 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.723696] end_request: I/O
error, dev sdf, sector 15857929
Oct 6 21:38:12 localhost kernel: [22027.723802] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.723808] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.723818] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 11 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.723842] end_request: I/O
error, dev sdf, sector 15857937
Oct 6 21:38:12 localhost kernel: [22027.723945] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.723952] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.723961] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 19 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.723988] end_request: I/O
error, dev sdf, sector 15857945
Oct 6 21:38:12 localhost kernel: [22027.724091] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.724098] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.724108] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 21 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.724133] end_request: I/O
error, dev sdf, sector 15857953
Oct 6 21:38:12 localhost kernel: [22027.724237] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.724244] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.724253] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 29 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.724278] end_request: I/O
error, dev sdf, sector 15857961
Oct 6 21:38:12 localhost kernel: [22027.724379] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.724386] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.724395] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 31 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.724420] end_request: I/O
error, dev sdf, sector 15857969
Oct 6 21:38:12 localhost kernel: [22027.724525] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.724532] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.724541] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 39 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.724566] end_request: I/O
error, dev sdf, sector 15857977
Oct 6 21:38:12 localhost kernel: [22027.724669] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.724676] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.724684] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 41 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.724709] end_request: I/O
error, dev sdf, sector 15857985
Oct 6 21:38:12 localhost kernel: [22027.724810] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.724817] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.724826] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 49 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.724850] end_request: I/O
error, dev sdf, sector 15857993
Oct 6 21:38:12 localhost kernel: [22027.724955] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.724962] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.724971] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 51 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.724995] end_request: I/O
error, dev sdf, sector 15858001
Oct 6 21:38:12 localhost kernel: [22027.726401] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.726408] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.726417] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 59 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.726443] end_request: I/O
error, dev sdf, sector 15858009
Oct 6 21:38:12 localhost kernel: [22027.726553] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.726561] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.726570] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 61 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.726595] end_request: I/O
error, dev sdf, sector 15858017
Oct 6 21:38:12 localhost kernel: [22027.726700] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.726707] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.726716] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 69 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.726741] end_request: I/O
error, dev sdf, sector 15858025
Oct 6 21:38:12 localhost kernel: [22027.727916] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.727925] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.727935] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 71 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.727962] end_request: I/O
error, dev sdf, sector 15858033
Oct 6 21:38:12 localhost kernel: [22027.728075] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.728083] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.728092] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 79 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.728117] end_request: I/O
error, dev sdf, sector 15858041
Oct 6 21:38:12 localhost kernel: [22027.728221] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.728229] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.728238] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 81 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.728262] end_request: I/O
error, dev sdf, sector 15858049
Oct 6 21:38:12 localhost kernel: [22027.728366] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.728374] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.728383] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 89 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.728409] end_request: I/O
error, dev sdf, sector 15858057
Oct 6 21:38:12 localhost kernel: [22027.728515] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.728522] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.728531] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 91 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.728555] end_request: I/O
error, dev sdf, sector 15858065
Oct 6 21:38:12 localhost kernel: [22027.728659] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.728666] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.728676] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 99 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.728700] end_request: I/O
error, dev sdf, sector 15858073
Oct 6 21:38:12 localhost kernel: [22027.728805] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.728812] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.728821] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 a1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.728846] end_request: I/O
error, dev sdf, sector 15858081
Oct 6 21:38:12 localhost kernel: [22027.728948] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.728955] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.728964] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 a9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.728991] end_request: I/O
error, dev sdf, sector 15858089
Oct 6 21:38:12 localhost kernel: [22027.729802] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.729810] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.729819] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 b1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.729844] end_request: I/O
error, dev sdf, sector 15858097
Oct 6 21:38:12 localhost kernel: [22027.729945] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.729952] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.729961] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 b9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.729989] end_request: I/O
error, dev sdf, sector 15858105
Oct 6 21:38:12 localhost kernel: [22027.730085] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.730092] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.730101] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 c1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.730130] end_request: I/O
error, dev sdf, sector 15858113
Oct 6 21:38:12 localhost kernel: [22027.730229] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.730235] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.730244] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 c9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.730269] end_request: I/O
error, dev sdf, sector 15858121
Oct 6 21:38:12 localhost kernel: [22027.730374] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.730380] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.730389] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 d1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.730414] end_request: I/O
error, dev sdf, sector 15858129
Oct 6 21:38:12 localhost kernel: [22027.730517] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.730523] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.730532] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 d9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.730556] end_request: I/O
error, dev sdf, sector 15858137
Oct 6 21:38:12 localhost kernel: [22027.730661] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.730668] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.730676] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 e1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.730701] end_request: I/O
error, dev sdf, sector 15858145
Oct 6 21:38:12 localhost kernel: [22027.730804] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.730810] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.730819] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 e9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.730844] end_request: I/O
error, dev sdf, sector 15858153
Oct 6 21:38:12 localhost kernel: [22027.730949] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.730955] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.730965] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 f1 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.730989] end_request: I/O
error, dev sdf, sector 15858161
Oct 6 21:38:12 localhost kernel: [22027.731093] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.731100] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.731108] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f9 f9 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.731133] end_request: I/O
error, dev sdf, sector 15858169
Oct 6 21:38:12 localhost kernel: [22027.731236] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.731243] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.731252] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 fa 01 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.731277] end_request: I/O
error, dev sdf, sector 15858177
Oct 6 21:38:12 localhost kernel: [22027.731380] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.731387] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.731396] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 fa 09 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.731421] end_request: I/O
error, dev sdf, sector 15858185
Oct 6 21:38:12 localhost kernel: [22027.731526] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.731533] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.731542] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 fa 11 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.731568] end_request: I/O
error, dev sdf, sector 15858193
Oct 6 21:38:12 localhost kernel: [22027.731673] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.731680] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.731689] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 fa 19 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.731713] end_request: I/O
error, dev sdf, sector 15858201
Oct 6 21:38:12 localhost kernel: [22027.731802] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.731808] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.731817] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 fa 21 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.731840] end_request: I/O
error, dev sdf, sector 15858209
Oct 6 21:38:12 localhost kernel: [22027.731927] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.731933] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.731941] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 fa 29 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.731965] end_request: I/O
error, dev sdf, sector 15858217
Oct 6 21:38:12 localhost kernel: [22027.732050] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.732056] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.732065] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 fa 31 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.732090] end_request: I/O
error, dev sdf, sector 15858225
Oct 6 21:38:12 localhost kernel: [22027.732188] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.732195] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.732204] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 fa 39 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.732229] end_request: I/O
error, dev sdf, sector 15858233
Oct 6 21:38:12 localhost kernel: [22027.732328] sd 8:0:0:0: [sdf]
Unhandled error code
Oct 6 21:38:12 localhost kernel: [22027.732335] sd 8:0:0:0: [sdf]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Oct 6 21:38:12 localhost kernel: [22027.732344] sd 8:0:0:0: [sdf]
CDB: Read(10): 28 00 00 f1 f6 81 00 00 08 00
Oct 6 21:38:12 localhost kernel: [22027.732368] end_request: I/O
error, dev sdf, sector 15857281
Oct 6 21:38:12 localhost kernel: [22027.905071] usb 1-3: new high
speed USB device using ehci_hcd and address 6
Oct 6 21:38:12 localhost kernel: [22028.040526] usb 1-3: New USB
device found, idVendor=1005, idProduct=b113
Oct 6 21:38:12 localhost kernel: [22028.040534] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 6 21:38:12 localhost kernel: [22028.040540] usb 1-3: Product: USB
FLASH DRIVE
Oct 6 21:38:12 localhost kernel: [22028.040544] usb 1-3: Manufacturer:
Oct 6 21:38:12 localhost kernel: [22028.040549] usb 1-3:
SerialNumber: 196909000DF8
Oct 6 21:38:12 localhost kernel: [22028.040777] usb 1-3:
configuration #1 chosen from 1 choice
Oct 6 21:38:12 localhost kernel: [22028.041402] scsi9 : SCSI
emulation for USB Mass Storage devices
Oct 6 21:38:12 localhost kernel: [22028.041845] usb 1-4: USB
disconnect, address 5
Oct 6 21:38:12 localhost kernel: [22028.060253] usb-storage: device found at 6
Oct 6 21:38:12 localhost kernel: [22028.060261] usb-storage: waiting
for device to settle before scanning
Oct 6 21:38:13 localhost kernel: [22028.848041] usb 1-4: new high
speed USB device using ehci_hcd and address 7
Oct 6 21:38:13 localhost kernel: [22028.985403] usb 1-4: New USB
device found, idVendor=1058, idProduct=0901
Oct 6 21:38:13 localhost kernel: [22028.985411] usb 1-4: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 6 21:38:13 localhost kernel: [22028.985417] usb 1-4: Product: External HDD
Oct 6 21:38:13 localhost kernel: [22028.985422] usb 1-4:
Manufacturer: Western Digital
Oct 6 21:38:13 localhost kernel: [22028.985426] usb 1-4:
SerialNumber: 57442D5743414E4B43383633333636
Oct 6 21:38:13 localhost kernel: [22028.985643] usb 1-4:
configuration #1 chosen from 1 choice
Oct 6 21:38:13 localhost kernel: [22028.986125] scsi10 : SCSI
emulation for USB Mass Storage devices
Oct 6 21:38:13 localhost kernel: [22028.986575] usb-storage: device found at 7
Oct 6 21:38:13 localhost kernel: [22028.986581] usb-storage: waiting
for device to settle before scanning
Oct 6 21:38:17 localhost kernel: [22033.056227] usb-storage: device
scan complete
Oct 6 21:38:17 localhost kernel: [22033.056808] scsi 9:0:0:0:
Direct-Access USB FLASH DRIVE 34CH PQ: 0 ANSI: 0 CCS
Oct 6 21:38:17 localhost kernel: [22033.058388] sd 9:0:0:0: Attached
scsi generic sg5 type 0
Oct 6 21:38:17 localhost kernel: [22033.059607] sd 9:0:0:0: [sdd]
4030464 512-byte logical blocks: (2.06 GB/1.92 GiB)
Oct 6 21:38:17 localhost kernel: [22033.060185] sd 9:0:0:0: [sdd]
Write Protect is off
Oct 6 21:38:17 localhost kernel: [22033.060198] sd 9:0:0:0: [sdd]
Mode Sense: 23 00 00 00
Oct 6 21:38:17 localhost kernel: [22033.060207] sd 9:0:0:0: [sdd]
Assuming drive cache: write through
Oct 6 21:38:17 localhost kernel: [22033.063042] sd 9:0:0:0: [sdd]
Assuming drive cache: write through
Oct 6 21:38:17 localhost kernel: [22033.063060] sdd: sdd1
Oct 6 21:38:17 localhost kernel: [22033.081424] sd 9:0:0:0: [sdd]
Assuming drive cache: write through
Oct 6 21:38:17 localhost kernel: [22033.081441] sd 9:0:0:0: [sdd]
Attached SCSI removable disk
Oct 6 21:38:17 localhost kernel: [22033.406615] EXT4-fs error (device
sdf2): ext4_find_entry: reading directory #2 offset 0
Oct 6 21:38:17 localhost kernel: [22033.406716] EXT4-fs error (device
sdf2): ext4_find_entry: reading directory #2 offset 0
Oct 6 21:38:17 localhost kernel: [22033.406730] EXT4-fs (sdf2):
previous I/O error to superblock detected
Oct 6 21:38:17 localhost kernel: [22033.406901] EXT4-fs error (device
sde3): ext4_find_entry: reading directory #2 offset 0
Oct 6 21:38:17 localhost kernel: [22033.406913] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 6 21:38:17 localhost kernel: [22033.406974] EXT4-fs error (device
sde3): ext4_find_entry: reading directory #2 offset 0
Oct 6 21:38:17 localhost kernel: [22033.406985] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 6 21:38:17 localhost kernel: [22033.412102] EXT4-fs error (device
sdf2): ext4_find_entry: reading directory #2 offset 0
Oct 6 21:38:17 localhost kernel: [22033.412119] EXT4-fs (sdf2):
previous I/O error to superblock detected
Oct 6 21:38:17 localhost kernel: [22033.412270] EXT4-fs error (device
sde3): ext4_find_entry: reading directory #2 offset 0
Oct 6 21:38:17 localhost kernel: [22033.412283] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 6 21:38:17 localhost kernel: [22033.424566] EXT4-fs error (device
sdf2): ext4_find_entry: reading directory #2 offset 0
Oct 6 21:38:17 localhost kernel: [22033.424584] EXT4-fs (sdf2):
previous I/O error to superblock detected
Oct 6 21:38:17 localhost kernel: [22033.424761] EXT4-fs error (device
sde3): ext4_find_entry: reading directory #2 offset 0
Oct 6 21:38:17 localhost kernel: [22033.424773] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 6 21:38:18 localhost kernel: [22033.984230] usb-storage: device
scan complete
Oct 6 21:38:18 localhost kernel: [22034.019724] scsi 10:0:0:0:
Direct-Access WD 2500JB External 0108 PQ: 0 ANSI: 0
Oct 6 21:38:18 localhost kernel: [22034.023461] sd 10:0:0:0: Attached
scsi generic sg6 type 0
Oct 6 21:38:18 localhost kernel: [22034.023746] sd 10:0:0:0: [sdg]
488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 6 21:38:18 localhost kernel: [22034.024930] sd 10:0:0:0: [sdg]
Write Protect is off
Oct 6 21:38:18 localhost kernel: [22034.024941] sd 10:0:0:0: [sdg]
Mode Sense: 03 00 00 00
Oct 6 21:38:18 localhost kernel: [22034.024948] sd 10:0:0:0: [sdg]
Assuming drive cache: write through
Oct 6 21:38:18 localhost kernel: [22034.026798] sd 10:0:0:0: [sdg]
Assuming drive cache: write through
Oct 6 21:38:18 localhost kernel: [22034.026812] sdg: sdg1 sdg2 sdg3 sdg4
Oct 6 21:38:18 localhost kernel: [22034.045300] sd 10:0:0:0: [sdg]
Assuming drive cache: write through
Oct 6 21:38:18 localhost kernel: [22034.045314] sd 10:0:0:0: [sdg]
Attached SCSI disk
Oct 6 21:52:24 localhost kernel: [22879.964667] usb 1-4: USB
disconnect, address 7
Oct 6 22:00:45 localhost kernel: [23381.125313] EXT4-fs error (device
sdf2): ext4_find_entry: reading directory #2 offset 0
Oct 6 22:00:45 localhost kernel: [23381.125333] EXT4-fs (sdf2):
previous I/O error to superblock detected
Oct 6 22:00:45 localhost kernel: [23381.125534] EXT4-fs error (device
sde3): ext4_find_entry: reading directory #2 offset 0
Oct 6 22:00:45 localhost kernel: [23381.125547] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 7 06:32:17 localhost kernel: [54073.006047] EXT4-fs error (device
sde3): ext4_readdir: directory #2 contains a hole at offset 0
Oct 7 06:32:17 localhost kernel: [54073.006062] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 7 06:32:17 localhost kernel: [54073.346303] EXT4-fs error (device
sdf1): ext4_readdir: directory #188930 contains a hole at offset 0
Oct 7 06:32:23 localhost kernel: [54079.000142] Aborting journal on
device sdf1-8.
Oct 7 06:32:23 localhost kernel: [54079.000173] JBD2: I/O error
detected when updating journal superblock for sdf1-8.
Oct 7 06:32:24 localhost kernel: [54079.776082] EXT4-fs error (device
sdf1): ext4_readdir: directory #76291 contains a hole at offset 0
Oct 7 06:32:24 localhost kernel: [54079.776109] EXT4-fs (sdf1):
previous I/O error to superblock detected
Oct 7 06:32:24 localhost kernel: [54079.776517] EXT4-fs error (device
sdf1): ext4_readdir: directory #11 contains a hole at offset 0
Oct 7 06:32:24 localhost kernel: [54079.776535] EXT4-fs (sdf1):
previous I/O error to superblock detected
Oct 7 06:32:24 localhost kernel: [54079.776816] EXT4-fs error (device
sdf1): ext4_readdir: directory #188930 contains a hole at offset 0
Oct 7 06:32:24 localhost kernel: [54079.776837] EXT4-fs (sdf1):
previous I/O error to superblock detected
Oct 7 06:32:24 localhost kernel: [54080.182431] EXT4-fs error (device
sde3): ext4_readdir: directory #2 contains a hole at offset 0
Oct 7 06:32:24 localhost kernel: [54080.182449] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 7 06:32:30 localhost kernel: [54086.274731] EXT4-fs error (device
sde3): ext4_find_entry: reading directory #2 offset 0
Oct 7 06:32:30 localhost kernel: [54086.274749] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 7 06:32:30 localhost kernel: [54086.299016] EXT4-fs error (device
sdf1): ext4_readdir: directory #11 contains a hole at offset 0
Oct 7 06:32:30 localhost kernel: [54086.299035] EXT4-fs (sdf1):
previous I/O error to superblock detected
Oct 7 06:32:30 localhost kernel: [54086.303531] EXT4-fs error (device
sdf1): ext4_journal_start_sb: Detected aborted journal
Oct 7 06:32:30 localhost kernel: [54086.303546] EXT4-fs (sdf1):
Remounting filesystem read-only
Oct 7 06:32:30 localhost kernel: [54086.306239] EXT4-fs error (device
sdf2): ext4_find_entry: reading directory #2 offset 0
Oct 7 06:32:30 localhost kernel: [54086.306258] EXT4-fs (sdf2):
previous I/O error to superblock detected
Oct 7 06:32:30 localhost kernel: [54086.337652] EXT4-fs error (device
sdf1): ext4_readdir: directory #11 contains a hole at offset 0
Oct 7 07:20:55 localhost kernel: [56990.903207] EXT4-fs error (device
sde3): ext4_readdir: directory #2 contains a hole at offset 0
Oct 7 07:20:55 localhost kernel: [56990.903227] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 7 07:20:55 localhost kernel: [56990.904130] EXT4-fs error (device
sde3): ext4_readdir: directory #2 contains a hole at offset 0
Oct 7 07:20:55 localhost kernel: [56990.904147] EXT4-fs (sde3):
previous I/O error to superblock detected
Oct 7 07:28:11 localhost kernel: [57426.753841] usb 1-3: USB
disconnect, address 6
Oct 7 07:29:50 localhost kernel: [57526.156230]
xfce4-sensors-p[4134]: segfault at c13c5c9c ip b77015ab sp bfeb70d8
error 5 in libc-2.11.2.so[b7696000+140000]
Oct 7 07:29:51 localhost kernel: [57527.051538] md: md1 still in use.
Oct 7 07:29:51 localhost kernel: [57527.051751] md: md0 still in use.
Oct 7 07:29:51 localhost kernel: [57527.052155] md: md1 still in use.
Oct 7 07:29:51 localhost kernel: [57527.052426] md: md0 still in use.
Oct 7 07:29:52 localhost kernel: [57527.724865] fuse exit
Oct 7 07:29:54 localhost kernel: Kernel logging (proc) stopped.
***************************************************************************
* LOG FILE CONTENTS: syslog (session with bug symptoms) *
***************************************************************************
Oct 7 07:31:33 localhost kernel: imklog 4.6.4, log source = /proc/kmsg started.
Oct 7 07:31:33 localhost rsyslogd: [origin software="rsyslogd"
swVersion="4.6.4" x-pid="1371" x-info="http://www.rsyslog.com";]
(re)start
Oct 7 07:31:33 localhost kernel: [ 0.000000] Initializing cgroup
subsys cpuset
Oct 7 07:31:33 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 7 07:31:33 localhost kernel: [ 0.000000] Linux version
2.6.32-5-686 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5
(Debian 4.3.5-4) ) #1 SMP Mon Jun 13 04:13:06 UTC 2011
Oct 7 07:31:33 localhost kernel: [ 0.000000] KERNEL supported cpus:
Oct 7 07:31:33 localhost kernel: [ 0.000000] Intel GenuineIntel
Oct 7 07:31:33 localhost kernel: [ 0.000000] AMD AuthenticAMD
Oct 7 07:31:33 localhost kernel: [ 0.000000] NSC Geode by NSC
Oct 7 07:31:33 localhost kernel: [ 0.000000] Cyrix CyrixInstead
Oct 7 07:31:33 localhost kernel: [ 0.000000] Centaur CentaurHauls
Oct 7 07:31:33 localhost kernel: [ 0.000000] Transmeta GenuineTMx86
Oct 7 07:31:33 localhost kernel: [ 0.000000] Transmeta TransmetaCPU
Oct 7 07:31:33 localhost kernel: [ 0.000000] UMC UMC UMC UMC
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-provided physical RAM map:
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
0000000000000000 - 000000000009f000 (usable)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
000000000009f000 - 00000000000a0000 (reserved)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
00000000000f0000 - 0000000000100000 (reserved)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
0000000000100000 - 000000007fff0000 (usable)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
000000007fff0000 - 000000007fff3000 (ACPI NVS)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
000000007fff3000 - 0000000080000000 (ACPI data)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
00000000fec00000 - 0000000100000000 (reserved)
Oct 7 07:31:33 localhost kernel: [ 0.000000] DMI 2.2 present.
Oct 7 07:31:33 localhost kernel: [ 0.000000] Phoenix BIOS
detected: BIOS may corrupt low RAM, working around it.
Oct 7 07:31:33 localhost kernel: [ 0.000000] e820 update range:
0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Oct 7 07:31:33 localhost kernel: [ 0.000000] last_pfn = 0x7fff0
max_arch_pfn = 0x100000
Oct 7 07:31:33 localhost kernel: [ 0.000000] MTRR default type: uncachable
Oct 7 07:31:33 localhost kernel: [ 0.000000] MTRR fixed ranges enabled:
Oct 7 07:31:33 localhost kernel: [ 0.000000] 00000-9FFFF write-back
Oct 7 07:31:33 localhost kernel: [ 0.000000] A0000-EFFFF uncachable
Oct 7 07:31:33 localhost kernel: [ 0.000000] F0000-FFFFF write-through
Oct 7 07:31:33 localhost kernel: [ 0.000000] MTRR variable ranges enabled:
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0 base 000000000
mask F80000000 write-back
Oct 7 07:31:33 localhost kernel: [ 0.000000] 1 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 2 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 3 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 4 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 5 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 6 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 7 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] x86 PAT enabled: cpu
0, old 0x7040600070406, new 0x7010600070106
Oct 7 07:31:33 localhost kernel: [ 0.000000] initial memory mapped
: 0 - 01800000
Oct 7 07:31:33 localhost kernel: [ 0.000000] init_memory_mapping:
0000000000000000-00000000373fe000
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0000000000 -
0000400000 page 4k
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0000400000 -
0037000000 page 2M
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0037000000 -
00373fe000 page 4k
Oct 7 07:31:33 localhost kernel: [ 0.000000] kernel direct mapping
tables up to 373fe000 @ 10000-16000
Oct 7 07:31:33 localhost kernel: [ 0.000000] RAMDISK: 3772b000 - 37fefab0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Allocated new
RAMDISK: 00100000 - 009c4ab0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Move RAMDISK from
000000003772b000 - 0000000037fefaaf to 00100000 - 009c4aaf
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: RSDP 000f70d0
00014 (v00 IntelR)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: RSDT 7fff3000
0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: FACP 7fff3040
00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: DSDT 7fff30c0
042DC (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: FACS 7fff0000 00040
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: APIC 7fff73c0
00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: Local APIC
address 0xfee00000
Oct 7 07:31:33 localhost kernel: [ 0.000000] 1163MB HIGHMEM available.
Oct 7 07:31:33 localhost kernel: [ 0.000000] 883MB LOWMEM available.
Oct 7 07:31:33 localhost kernel: [ 0.000000] mapped low ram: 0 - 373fe000
Oct 7 07:31:33 localhost kernel: [ 0.000000] low ram: 0 - 373fe000
Oct 7 07:31:33 localhost kernel: [ 0.000000] node 0 low ram:
00000000 - 373fe000
Oct 7 07:31:33 localhost kernel: [ 0.000000] node 0 bootmap
00012000 - 00018e80
Oct 7 07:31:33 localhost kernel: [ 0.000000] (9 early
reservations) ==> bootmem [0000000000 - 00373fe000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #0 [0000000000 -
0000001000] BIOS data page ==> [0000000000 - 0000001000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #1 [0000001000 -
0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #2 [0000006000 -
0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #3 [0001000000 -
00014c8bb4] TEXT DATA BSS ==> [0001000000 - 00014c8bb4]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #4 [000009f000 -
0000100000] BIOS reserved ==> [000009f000 - 0000100000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #5 [00014c9000 -
00014cf06e] BRK ==> [00014c9000 - 00014cf06e]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #6 [0000010000 -
0000012000] PGTABLE ==> [0000010000 - 0000012000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #7 [0000100000 -
00009c4ab0] NEW RAMDISK ==> [0000100000 - 00009c4ab0]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #8 [0000012000 -
0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] found SMP MP-table at
[c00f55d0] f55d0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Zone PFN ranges:
Oct 7 07:31:33 localhost kernel: [ 0.000000] DMA 0x00000010
-> 0x00001000
Oct 7 07:31:33 localhost kernel: [ 0.000000] Normal 0x00001000
-> 0x000373fe
Oct 7 07:31:33 localhost kernel: [ 0.000000] HighMem 0x000373fe
-> 0x0007fff0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Movable zone start
PFN for each node
Oct 7 07:31:33 localhost kernel: [ 0.000000] early_node_map[2]
active PFN ranges
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0: 0x00000100 -> 0x0007fff0
Oct 7 07:31:33 localhost kernel: [ 0.000000] On node 0 totalpages: 524159
Oct 7 07:31:33 localhost kernel: [ 0.000000] free_area_init_node:
node 0, pgdat c13b08a0, node_mem_map c14d1200
Oct 7 07:31:33 localhost kernel: [ 0.000000] DMA zone: 32 pages
used for memmap
Oct 7 07:31:33 localhost kernel: [ 0.000000] DMA zone: 0 pages reserved
Oct 7 07:31:33 localhost kernel: [ 0.000000] DMA zone: 3951
pages, LIFO batch:0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Normal zone: 1736
pages used for memmap
Oct 7 07:31:33 localhost kernel: [ 0.000000] Normal zone: 220470
pages, LIFO batch:31
Oct 7 07:31:33 localhost kernel: [ 0.000000] HighMem zone: 2328
pages used for memmap
Oct 7 07:31:33 localhost kernel: [ 0.000000] HighMem zone:
295642 pages, LIFO batch:31
Oct 7 07:31:33 localhost kernel: [ 0.000000] Using APIC driver default
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: Local APIC
address 0xfee00000
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x00] lapic_id[0x00] enabled)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x01] lapic_id[0x01] enabled)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x00] high edge lint[0x1])
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x01] high edge lint[0x1])
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: IOAPIC
(id[0x02] address[0xfec00000] gsi_base[0])
Oct 7 07:31:33 localhost kernel: [ 0.000000] IOAPIC[0]: apic_id 2,
version 32, address 0xfec00000, GSI 0-23
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: INT_SRC_OVR
(bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: INT_SRC_OVR
(bus 0 bus_irq 9 global_irq 9 high level)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: IRQ0 used by override.
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: IRQ2 used by override.
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: IRQ9 used by override.
Oct 7 07:31:33 localhost kernel: [ 0.000000] Using ACPI (MADT) for
SMP configuration information
Oct 7 07:31:33 localhost kernel: [ 0.000000] SMP: Allowing 2 CPUs,
0 hotplug CPUs
Oct 7 07:31:33 localhost kernel: [ 0.000000] nr_irqs_gsi: 24
Oct 7 07:31:33 localhost kernel: [ 0.000000] PM: Registered nosave
memory: 000000000009f000 - 00000000000a0000
Oct 7 07:31:33 localhost kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000a0000 - 00000000000f0000
Oct 7 07:31:33 localhost kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000f0000 - 0000000000100000
Oct 7 07:31:33 localhost kernel: [ 0.000000] Allocating PCI
resources starting at 80000000 (gap: 80000000:7ec00000)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Booting
paravirtualized kernel on bare hardware
Oct 7 07:31:33 localhost kernel: [ 0.000000] NR_CPUS:32
nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
Oct 7 07:31:33 localhost kernel: [ 0.000000] PERCPU: Embedded 14
pages/cpu @c2800000 s34328 r0 d23016 u2097152
Oct 7 07:31:33 localhost kernel: [ 0.000000] pcpu-alloc: s34328 r0
d23016 u2097152 alloc=1*4194304
Oct 7 07:31:33 localhost kernel: [ 0.000000] pcpu-alloc: [0] 0 1
Oct 7 07:31:33 localhost kernel: [ 0.000000] Built 1 zonelists in
Zone order, mobility grouping on. Total pages: 520063
Oct 7 07:31:33 localhost kernel: [ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=d6625e4a-53cf-46bd-99a3-b48f0da14ee2 ro quiet
Oct 7 07:31:33 localhost kernel: [ 0.000000] PID hash table
entries: 4096 (order: 2, 16384 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Dentry cache hash
table entries: 131072 (order: 7, 524288 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Inode-cache hash
table entries: 65536 (order: 6, 262144 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Enabling fast FPU
save and restore... done.
Oct 7 07:31:33 localhost kernel: [ 0.000000] Enabling unmasked
SIMD FPU exception support... done.
Oct 7 07:31:33 localhost kernel: [ 0.000000] Initializing CPU#0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Initializing HighMem
for node 0 (000373fe:0007fff0)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Memory:
2064248k/2097088k available (2504k kernel code, 31268k reserved, 1313k
data, 380k init, 1191880k highmem)
Oct 7 07:31:33 localhost kernel: [ 0.000000] virtual kernel memory layout:
Oct 7 07:31:33 localhost kernel: [ 0.000000] fixmap :
0xffd56000 - 0xfffff000 (2724 kB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] pkmap :
0xff400000 - 0xff800000 (4096 kB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] vmalloc :
0xf7bfe000 - 0xff3fe000 ( 120 MB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] lowmem :
0xc0000000 - 0xf73fe000 ( 883 MB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] .init :
0xc13bb000 - 0xc141a000 ( 380 kB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] .data :
0xc1272001 - 0xc13ba4c0 (1313 kB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] .text :
0xc1000000 - 0xc1272001 (2504 kB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Checking if this
processor honours the WP bit even in supervisor mode...Ok.
Oct 7 07:31:33 localhost kernel: [ 0.000000] SLUB: Genslabs=13,
HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Oct 7 07:31:33 localhost kernel: [ 0.000000] Hierarchical RCU
implementation.
Oct 7 07:31:33 localhost kernel: [ 0.000000] NR_IRQS:1280
Oct 7 07:31:33 localhost kernel: [ 0.000000] Console: colour VGA+ 80x25
Oct 7 07:31:33 localhost kernel: [ 0.000000] console [tty0] enabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] Fast TSC calibration using PIT
Oct 7 07:31:33 localhost kernel: [ 0.000000] Detected 1986.729 MHz
processor.
Oct 7 07:31:33 localhost kernel: [ 0.004008] Calibrating delay
loop (skipped), value calculated using timer frequency.. 3973.45
BogoMIPS (lpj=7946916)
Oct 7 07:31:33 localhost kernel: [ 0.004037] Security Framework initialized
Oct 7 07:31:33 localhost kernel: [ 0.004048] SELinux: Disabled at boot.
Oct 7 07:31:33 localhost kernel: [ 0.004061] Mount-cache hash
table entries: 512
Oct 7 07:31:33 localhost kernel: [ 0.004300] Initializing cgroup subsys ns
Oct 7 07:31:33 localhost kernel: [ 0.004309] Initializing cgroup
subsys cpuacct
Oct 7 07:31:33 localhost kernel: [ 0.004317] Initializing cgroup
subsys devices
Oct 7 07:31:33 localhost kernel: [ 0.004323] Initializing cgroup
subsys freezer
Oct 7 07:31:33 localhost kernel: [ 0.004327] Initializing cgroup
subsys net_cls
Oct 7 07:31:33 localhost kernel: [ 0.004377] CPU: Trace cache: 12K
uops, L1 D cache: 16K
Oct 7 07:31:33 localhost kernel: [ 0.004383] CPU: L2 cache: 1024K
Oct 7 07:31:33 localhost kernel: [ 0.004388] CPU: Physical Processor ID: 0
Oct 7 07:31:33 localhost kernel: [ 0.004391] CPU: Processor Core ID: 0
Oct 7 07:31:33 localhost kernel: [ 0.004397] mce: CPU supports 4 MCE banks
Oct 7 07:31:33 localhost kernel: [ 0.004417] CPU0: Thermal
monitoring enabled (TM1)
Oct 7 07:31:33 localhost kernel: [ 0.004425] using mwait in idle threads.
Oct 7 07:31:33 localhost kernel: [ 0.004441] Performance Events:
no PMU driver, software events only.
Oct 7 07:31:33 localhost kernel: [ 0.004453] Checking 'hlt'
instruction... OK.
Oct 7 07:31:33 localhost kernel: [ 0.022302] ACPI: Core revision 20090903
Oct 7 07:31:33 localhost kernel: [ 0.032109] Enabling APIC mode:
Flat. Using 1 I/O APICs
Oct 7 07:31:33 localhost kernel: [ 0.036165] ..TIMER: vector=0x30
apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 7 07:31:33 localhost kernel: [ 0.075857] CPU0: Intel(R)
Pentium(R) 4 CPU 3.00GHz stepping 04
Oct 7 07:31:33 localhost kernel: [ 0.076001] Booting processor 1
APIC 0x1 ip 0x6000
Oct 7 07:31:33 localhost kernel: [ 0.008000] Initializing CPU#1
Oct 7 07:31:33 localhost kernel: [ 0.008000] CPU: Trace cache: 12K
uops, L1 D cache: 16K
Oct 7 07:31:33 localhost kernel: [ 0.008000] CPU: L2 cache: 1024K
Oct 7 07:31:33 localhost kernel: [ 0.008000] CPU: Physical Processor ID: 0
Oct 7 07:31:33 localhost kernel: [ 0.008000] CPU: Processor Core ID: 0
Oct 7 07:31:33 localhost kernel: [ 0.008000] CPU1: Thermal
monitoring enabled (TM1)
Oct 7 07:31:33 localhost kernel: [ 0.160135] CPU1: Intel(R)
Pentium(R) 4 CPU 3.00GHz stepping 04
Oct 7 07:31:33 localhost kernel: [ 0.160152] checking TSC
synchronization [CPU#0 -> CPU#1]: passed.
Oct 7 07:31:33 localhost kernel: [ 0.164126] Brought up 2 CPUs
Oct 7 07:31:33 localhost kernel: [ 0.164134] Total of 2 processors
activated (7947.04 BogoMIPS).
Oct 7 07:31:33 localhost kernel: [ 0.165031] CPU0 attaching sched-domain:
Oct 7 07:31:33 localhost kernel: [ 0.165039] domain 0: span 0-1
level SIBLING
Oct 7 07:31:33 localhost kernel: [ 0.165045] groups: 0
(cpu_power = 589) 1 (cpu_power = 589)
Oct 7 07:31:33 localhost kernel: [ 0.165058] domain 1: span 0-1 level MC
Oct 7 07:31:33 localhost kernel: [ 0.165063] groups: 0-1
(cpu_power = 1178)
Oct 7 07:31:33 localhost kernel: [ 0.165072] CPU1 attaching sched-domain:
Oct 7 07:31:33 localhost kernel: [ 0.165076] domain 0: span 0-1
level SIBLING
Oct 7 07:31:33 localhost kernel: [ 0.165081] groups: 1
(cpu_power = 589) 0 (cpu_power = 589)
Oct 7 07:31:33 localhost kernel: [ 0.165091] domain 1: span 0-1 level MC
Oct 7 07:31:33 localhost kernel: [ 0.165096] groups: 0-1
(cpu_power = 1178)
Oct 7 07:31:33 localhost kernel: [ 0.165255] devtmpfs: initialized
Oct 7 07:31:33 localhost kernel: [ 0.165255] regulator: core version 0.5
Oct 7 07:31:33 localhost kernel: [ 0.165255] NET: Registered
protocol family 16
Oct 7 07:31:33 localhost kernel: [ 0.165255] ACPI: bus type pci registered
Oct 7 07:31:33 localhost kernel: [ 0.191382] PCI: PCI BIOS
revision 2.10 entry at 0xfbb60, last bus=2
Oct 7 07:31:33 localhost kernel: [ 0.191386] PCI: Using
configuration type 1 for base access
Oct 7 07:31:33 localhost kernel: [ 0.192059] bio: create slab <bio-0> at 0
Oct 7 07:31:33 localhost kernel: [ 0.192943] ACPI: EC: Look up EC in DSDT
Oct 7 07:31:33 localhost kernel: [ 0.202254] ACPI: Interpreter enabled
Oct 7 07:31:33 localhost kernel: [ 0.202261] ACPI: (supports S0 S1 S3 S4 S5)
Oct 7 07:31:33 localhost kernel: [ 0.202313] ACPI: Using IOAPIC
for interrupt routing
Oct 7 07:31:33 localhost kernel: [ 0.210261] ACPI: No dock devices found.
Oct 7 07:31:33 localhost kernel: [ 0.210428] ACPI: PCI Root Bridge
[PCI0] (0000:00)
Oct 7 07:31:33 localhost kernel: [ 0.210502] pci 0000:00:00.0:
Enabling MCH 'Overflow' Device
Oct 7 07:31:33 localhost kernel: [ 0.210518] pci 0000:00:00.0: reg
10 32bit mmio pref: [0xf0000000-0xf3ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.210659] pci 0000:00:06.0: reg
10 32bit mmio: [0xfecf0000-0xfecf0fff]
Oct 7 07:31:33 localhost kernel: [ 0.210784] pci 0000:00:1d.0: reg
20 io port: [0xe300-0xe31f]
Oct 7 07:31:33 localhost kernel: [ 0.210855] pci 0000:00:1d.1: reg
20 io port: [0xe000-0xe01f]
Oct 7 07:31:33 localhost kernel: [ 0.210925] pci 0000:00:1d.2: reg
20 io port: [0xe100-0xe11f]
Oct 7 07:31:33 localhost kernel: [ 0.210995] pci 0000:00:1d.3: reg
20 io port: [0xe200-0xe21f]
Oct 7 07:31:33 localhost kernel: [ 0.211065] pci 0000:00:1d.7: reg
10 32bit mmio: [0xf8000000-0xf80003ff]
Oct 7 07:31:33 localhost kernel: [ 0.211132] pci 0000:00:1d.7:
PME# supported from D0 D3hot D3cold
Oct 7 07:31:33 localhost kernel: [ 0.211140] pci 0000:00:1d.7: PME# disabled
Oct 7 07:31:33 localhost kernel: [ 0.211254] pci 0000:00:1f.0:
Force enabled HPET at 0xfed00000
Oct 7 07:31:33 localhost kernel: [ 0.211297] pci 0000:00:1f.1: reg
10 io port: [0x00-0x07]
Oct 7 07:31:33 localhost kernel: [ 0.211308] pci 0000:00:1f.1: reg
14 io port: [0x00-0x03]
Oct 7 07:31:33 localhost kernel: [ 0.211319] pci 0000:00:1f.1: reg
18 io port: [0x00-0x07]
Oct 7 07:31:33 localhost kernel: [ 0.211329] pci 0000:00:1f.1: reg
1c io port: [0x00-0x03]
Oct 7 07:31:33 localhost kernel: [ 0.211339] pci 0000:00:1f.1: reg
20 io port: [0xf000-0xf00f]
Oct 7 07:31:33 localhost kernel: [ 0.211350] pci 0000:00:1f.1: reg
24 32bit mmio: [0x000000-0x0003ff]
Oct 7 07:31:33 localhost kernel: [ 0.211419] pci 0000:00:1f.3: reg
20 io port: [0x500-0x51f]
Oct 7 07:31:33 localhost kernel: [ 0.211479] pci 0000:00:1f.5: reg
10 io port: [0xe500-0xe5ff]
Oct 7 07:31:33 localhost kernel: [ 0.211490] pci 0000:00:1f.5: reg
14 io port: [0xe600-0xe63f]
Oct 7 07:31:33 localhost kernel: [ 0.211500] pci 0000:00:1f.5: reg
18 32bit mmio: [0xf8001000-0xf80011ff]
Oct 7 07:31:33 localhost kernel: [ 0.211511] pci 0000:00:1f.5: reg
1c 32bit mmio: [0xf8002000-0xf80020ff]
Oct 7 07:31:33 localhost kernel: [ 0.211551] pci 0000:00:1f.5:
PME# supported from D0 D3hot D3cold
Oct 7 07:31:33 localhost kernel: [ 0.211558] pci 0000:00:1f.5: PME# disabled
Oct 7 07:31:33 localhost kernel: [ 0.211617] pci 0000:01:00.0: reg
10 32bit mmio pref: [0xe0000000-0xe7ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.211627] pci 0000:01:00.0: reg
14 io port: [0xc000-0xc0ff]
Oct 7 07:31:33 localhost kernel: [ 0.211636] pci 0000:01:00.0: reg
18 32bit mmio: [0xf5000000-0xf500ffff]
Oct 7 07:31:33 localhost kernel: [ 0.211660] pci 0000:01:00.0: reg
30 32bit mmio pref: [0x000000-0x01ffff]
Oct 7 07:31:33 localhost kernel: [ 0.211689] pci 0000:01:00.0:
supports D1 D2
Oct 7 07:31:33 localhost kernel: [ 0.211729] pci 0000:01:00.1: reg
10 32bit mmio pref: [0xe8000000-0xefffffff]
Oct 7 07:31:33 localhost kernel: [ 0.211739] pci 0000:01:00.1: reg
14 32bit mmio: [0xf5010000-0xf501ffff]
Oct 7 07:31:33 localhost kernel: [ 0.211783] pci 0000:01:00.1:
supports D1 D2
Oct 7 07:31:33 localhost kernel: [ 0.211852] pci 0000:00:01.0:
bridge io port: [0xc000-0xcfff]
Oct 7 07:31:33 localhost kernel: [ 0.211859] pci 0000:00:01.0:
bridge 32bit mmio: [0xf4000000-0xf5ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.211867] pci 0000:00:01.0:
bridge 32bit mmio pref: [0xe0000000-0xefffffff]
Oct 7 07:31:33 localhost kernel: [ 0.211921] pci 0000:02:01.0: reg
10 io port: [0xd000-0xd00f]
Oct 7 07:31:33 localhost kernel: [ 0.211932] pci 0000:02:01.0: reg
14 io port: [0xd100-0xd10f]
Oct 7 07:31:33 localhost kernel: [ 0.211942] pci 0000:02:01.0: reg
18 io port: [0xd200-0xd20f]
Oct 7 07:31:33 localhost kernel: [ 0.211953] pci 0000:02:01.0: reg
1c io port: [0xd300-0xd30f]
Oct 7 07:31:33 localhost kernel: [ 0.211963] pci 0000:02:01.0: reg
20 io port: [0xd400-0xd41f]
Oct 7 07:31:33 localhost kernel: [ 0.211973] pci 0000:02:01.0: reg
24 io port: [0xd500-0xd5ff]
Oct 7 07:31:33 localhost kernel: [ 0.211984] pci 0000:02:01.0: reg
30 32bit mmio pref: [0x000000-0x00ffff]
Oct 7 07:31:33 localhost kernel: [ 0.212074] pci 0000:02:05.0: reg
10 io port: [0xd600-0xd6ff]
Oct 7 07:31:33 localhost kernel: [ 0.212085] pci 0000:02:05.0: reg
14 32bit mmio: [0xf7000000-0xf70000ff]
Oct 7 07:31:33 localhost kernel: [ 0.212118] pci 0000:02:05.0: reg
30 32bit mmio pref: [0x000000-0x00ffff]
Oct 7 07:31:33 localhost kernel: [ 0.212143] pci 0000:02:05.0:
supports D1 D2
Oct 7 07:31:33 localhost kernel: [ 0.212147] pci 0000:02:05.0:
PME# supported from D1 D2 D3hot D3cold
Oct 7 07:31:33 localhost kernel: [ 0.212154] pci 0000:02:05.0: PME# disabled
Oct 7 07:31:33 localhost kernel: [ 0.212210] pci 0000:00:1e.0:
transparent bridge
Oct 7 07:31:33 localhost kernel: [ 0.212217] pci 0000:00:1e.0:
bridge io port: [0xd000-0xdfff]
Oct 7 07:31:33 localhost kernel: [ 0.212225] pci 0000:00:1e.0:
bridge 32bit mmio: [0xf6000000-0xf7ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.212247] pci_bus 0000:00: on NUMA node 0
Oct 7 07:31:33 localhost kernel: [ 0.212258] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0._PRT]
Oct 7 07:31:33 localhost kernel: [ 0.212427] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.HUB0._PRT]
Oct 7 07:31:33 localhost kernel: [ 0.228250] ACPI: PCI Interrupt
Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.228448] ACPI: PCI Interrupt
Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.228639] ACPI: PCI Interrupt
Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.228828] ACPI: PCI Interrupt
Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.229018] ACPI: PCI Interrupt
Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 7 07:31:33 localhost kernel: [ 0.229210] ACPI: PCI Interrupt
Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 7 07:31:33 localhost kernel: [ 0.229401] ACPI: PCI Interrupt
Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.229591] ACPI: PCI Interrupt
Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.229796] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Oct 7 07:31:33 localhost kernel: [ 0.229806] vgaarb: loaded
Oct 7 07:31:33 localhost kernel: [ 0.229843] PCI: Using ACPI for IRQ routing
Oct 7 07:31:33 localhost kernel: [ 0.229843] hpet clockevent registered
Oct 7 07:31:33 localhost kernel: [ 0.229843] HPET: 3 timers in
total, 0 timers will be used for per-cpu timer
Oct 7 07:31:33 localhost kernel: [ 0.229843] hpet0: at MMIO
0xfed00000, IRQs 2, 8, 0
Oct 7 07:31:33 localhost kernel: [ 0.229843] hpet0: 3 comparators,
64-bit 14.318180 MHz counter
Oct 7 07:31:33 localhost kernel: [ 0.236031] Switching to clocksource tsc
Oct 7 07:31:33 localhost kernel: [ 0.238480] pnp: PnP ACPI init
Oct 7 07:31:33 localhost kernel: [ 0.238508] ACPI: bus type pnp registered
Oct 7 07:31:33 localhost kernel: [ 0.243169] pnp: PnP ACPI: found 12 devices
Oct 7 07:31:33 localhost kernel: [ 0.243174] ACPI: ACPI bus type
pnp unregistered
Oct 7 07:31:33 localhost kernel: [ 0.243181] PnPBIOS: Disabled by ACPI PNP
Oct 7 07:31:33 localhost kernel: [ 0.243202] system 00:01: ioport
range 0xb78-0xb7b has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243208] system 00:01: ioport
range 0xf78-0xf7b has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243214] system 00:01: ioport
range 0xa78-0xa7b has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243220] system 00:01: ioport
range 0xe78-0xe7b has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243225] system 00:01: ioport
range 0xbbc-0xbbf has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243231] system 00:01: ioport
range 0xfbc-0xfbf has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243237] system 00:01: ioport
range 0x4d0-0x4d1 has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243242] system 00:01: ioport
range 0x294-0x297 has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243248] system 00:01: ioport
range 0x4e0-0x4e7 has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243264] system 00:0a: ioport
range 0x400-0x4bf has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243278] system 00:0b: iomem
range 0xd0c00-0xd3fff has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243284] system 00:0b: iomem
range 0xf0000-0xf7fff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243290] system 00:0b: iomem
range 0xf8000-0xfbfff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243296] system 00:0b: iomem
range 0xfc000-0xfffff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243302] system 00:0b: iomem
range 0x7fff0000-0x7fffffff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243308] system 00:0b: iomem
range 0x0-0x9ffff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243314] system 00:0b: iomem
range 0x100000-0x7ffeffff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243321] system 00:0b: iomem
range 0xfec00000-0xfec00fff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243327] system 00:0b: iomem
range 0xfec01000-0xfed8ffff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243333] system 00:0b: iomem
range 0xfee00000-0xfee00fff has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243339] system 00:0b: iomem
range 0xffb00000-0xffbfffff has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243345] system 00:0b: iomem
range 0xfff00000-0xffffffff has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243351] system 00:0b: iomem
range 0xe0000-0xeffff has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.278364] pci 0000:00:01.0: PCI
bridge, secondary bus 0000:01
Oct 7 07:31:33 localhost kernel: [ 0.278373] pci 0000:00:01.0:
IO window: 0xc000-0xcfff
Oct 7 07:31:33 localhost kernel: [ 0.278382] pci 0000:00:01.0:
MEM window: 0xf4000000-0xf5ffffff
Oct 7 07:31:33 localhost kernel: [ 0.278390] pci 0000:00:01.0:
PREFETCH window: 0xe0000000-0xefffffff
Oct 7 07:31:33 localhost kernel: [ 0.278403] pci 0000:00:1e.0: PCI
bridge, secondary bus 0000:02
Oct 7 07:31:33 localhost kernel: [ 0.278410] pci 0000:00:1e.0:
IO window: 0xd000-0xdfff
Oct 7 07:31:33 localhost kernel: [ 0.278418] pci 0000:00:1e.0:
MEM window: 0xf6000000-0xf7ffffff
Oct 7 07:31:33 localhost kernel: [ 0.278426] pci 0000:00:1e.0:
PREFETCH window: 0x80000000-0x800fffff
Oct 7 07:31:33 localhost kernel: [ 0.278452] pci 0000:00:1e.0:
setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 0.278462] pci_bus 0000:00:
resource 0 io: [0x00-0xffff]
Oct 7 07:31:33 localhost kernel: [ 0.278468] pci_bus 0000:00:
resource 1 mem: [0x000000-0xffffffff]
Oct 7 07:31:33 localhost kernel: [ 0.278473] pci_bus 0000:01:
resource 0 io: [0xc000-0xcfff]
Oct 7 07:31:33 localhost kernel: [ 0.278479] pci_bus 0000:01:
resource 1 mem: [0xf4000000-0xf5ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.278484] pci_bus 0000:01:
resource 2 pref mem [0xe0000000-0xefffffff]
Oct 7 07:31:33 localhost kernel: [ 0.278490] pci_bus 0000:02:
resource 0 io: [0xd000-0xdfff]
Oct 7 07:31:33 localhost kernel: [ 0.278495] pci_bus 0000:02:
resource 1 mem: [0xf6000000-0xf7ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.278500] pci_bus 0000:02:
resource 2 pref mem [0x80000000-0x800fffff]
Oct 7 07:31:33 localhost kernel: [ 0.278506] pci_bus 0000:02:
resource 3 io: [0x00-0xffff]
Oct 7 07:31:33 localhost kernel: [ 0.278511] pci_bus 0000:02:
resource 4 mem: [0x000000-0xffffffff]
Oct 7 07:31:33 localhost kernel: [ 0.278573] NET: Registered
protocol family 2
Oct 7 07:31:33 localhost kernel: [ 0.278749] IP route cache hash
table entries: 32768 (order: 5, 131072 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.279431] TCP established hash
table entries: 131072 (order: 8, 1048576 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.280330] TCP bind hash table
entries: 65536 (order: 7, 524288 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.280889] TCP: Hash tables
configured (established 131072 bind 65536)
Oct 7 07:31:33 localhost kernel: [ 0.280893] TCP reno registered
Oct 7 07:31:33 localhost kernel: [ 0.281102] NET: Registered
protocol family 1
Oct 7 07:31:33 localhost kernel: [ 0.281259] pci 0000:01:00.0:
Boot video device
Oct 7 07:31:33 localhost kernel: [ 0.281383] Unpacking initramfs...
Oct 7 07:31:33 localhost kernel: [ 0.754503] Freeing initrd
memory: 8978k freed
Oct 7 07:31:33 localhost kernel: [ 0.766116] audit: initializing
netlink socket (disabled)
Oct 7 07:31:33 localhost kernel: [ 0.766141] type=2000
audit(1317972676.763:1): initialized
Oct 7 07:31:33 localhost kernel: [ 0.771640] highmem bounce pool
size: 64 pages
Oct 7 07:31:33 localhost kernel: [ 0.771650] HugeTLB registered 4
MB page size, pre-allocated 0 pages
Oct 7 07:31:33 localhost kernel: [ 0.774477] VFS: Disk quotas dquot_6.5.2
Oct 7 07:31:33 localhost kernel: [ 0.774594] Dquot-cache hash
table entries: 1024 (order 0, 4096 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.774738] msgmni has been set to 1723
Oct 7 07:31:33 localhost kernel: [ 0.775160] alg: No test for stdrng (krng)
Oct 7 07:31:33 localhost kernel: [ 0.775270] Block layer SCSI
generic (bsg) driver version 0.4 loaded (major 253)
Oct 7 07:31:33 localhost kernel: [ 0.775276] io scheduler noop registered
Oct 7 07:31:33 localhost kernel: [ 0.775280] io scheduler
anticipatory registered
Oct 7 07:31:33 localhost kernel: [ 0.775284] io scheduler deadline
registered
Oct 7 07:31:33 localhost kernel: [ 0.775354] io scheduler cfq
registered (default)
Oct 7 07:31:33 localhost kernel: [ 0.775715] isapnp: Scanning for
PnP cards...
Oct 7 07:31:33 localhost kernel: [ 1.129868] isapnp: No Plug &
Play device found
Oct 7 07:31:33 localhost kernel: [ 1.132725] Linux agpgart interface v0.103
Oct 7 07:31:33 localhost kernel: [ 1.132878] agpgart-intel
0000:00:00.0: Intel 865 Chipset
Oct 7 07:31:33 localhost kernel: [ 1.137206] agpgart-intel
0000:00:00.0: AGP aperture is 64M @ 0xf0000000
Oct 7 07:31:33 localhost kernel: [ 1.137352] Serial: 8250/16550
driver, 4 ports, IRQ sharing enabled
Oct 7 07:31:33 localhost kernel: [ 1.138071] PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 7 07:31:33 localhost kernel: [ 1.140326] serio: i8042 KBD port
at 0x60,0x64 irq 1
Oct 7 07:31:33 localhost kernel: [ 1.140342] serio: i8042 AUX port
at 0x60,0x64 irq 12
Oct 7 07:31:33 localhost kernel: [ 1.140499] mice: PS/2 mouse
device common for all mice
Oct 7 07:31:33 localhost kernel: [ 1.140568] rtc_cmos 00:03: RTC
can wake from S4
Oct 7 07:31:33 localhost kernel: [ 1.140639] rtc_cmos 00:03: rtc
core: registered rtc_cmos as rtc0
Oct 7 07:31:33 localhost kernel: [ 1.140670] rtc0: alarms up to
one month, 242 bytes nvram, hpet irqs
Oct 7 07:31:33 localhost kernel: [ 1.140696] cpuidle: using governor ladder
Oct 7 07:31:33 localhost kernel: [ 1.140700] cpuidle: using governor menu
Oct 7 07:31:33 localhost kernel: [ 1.140709] No iBFT detected.
Oct 7 07:31:33 localhost kernel: [ 1.141426] TCP cubic registered
Oct 7 07:31:33 localhost kernel: [ 1.141653] NET: Registered
protocol family 10
Oct 7 07:31:33 localhost kernel: [ 1.143274] Mobile IPv6
Oct 7 07:31:33 localhost kernel: [ 1.143280] NET: Registered
protocol family 17
Oct 7 07:31:33 localhost kernel: [ 1.143307] Using IPI No-Shortcut mode
Oct 7 07:31:33 localhost kernel: [ 1.143436] PM: Resume from disk failed.
Oct 7 07:31:33 localhost kernel: [ 1.143460] registered taskstats version 1
Oct 7 07:31:33 localhost kernel: [ 1.143858] rtc_cmos 00:03:
setting system clock to 2011-10-07 07:31:17 UTC (1317972677)
Oct 7 07:31:33 localhost kernel: [ 1.143904] Initalizing network
drop monitor service
Oct 7 07:31:33 localhost kernel: [ 1.143945] Freeing unused kernel
memory: 380k freed
Oct 7 07:31:33 localhost kernel: [ 1.144411] Write protecting the
kernel text: 2508k
Oct 7 07:31:33 localhost kernel: [ 1.144450] Write protecting the
kernel read-only data: 904k
Oct 7 07:31:33 localhost kernel: [ 1.162285] input: AT Translated
Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Oct 7 07:31:33 localhost kernel: [ 1.182132] udev[56]: starting version 164
Oct 7 07:31:33 localhost kernel: [ 1.462075] usbcore: registered
new interface driver usbfs
Oct 7 07:31:33 localhost kernel: [ 1.462479] usbcore: registered
new interface driver hub
Oct 7 07:31:33 localhost kernel: [ 1.462870] usbcore: registered
new device driver usb
Oct 7 07:31:33 localhost kernel: [ 1.499001] SCSI subsystem initialized
Oct 7 07:31:33 localhost kernel: [ 1.562212] libata version 3.00 loaded.
Oct 7 07:31:33 localhost kernel: [ 1.564223] ehci_hcd: USB 2.0
'Enhanced' Host Controller (EHCI) Driver
Oct 7 07:31:33 localhost kernel: [ 1.564305] ehci_hcd
0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Oct 7 07:31:33 localhost kernel: [ 1.564339] ehci_hcd
0000:00:1d.7: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.564348] ehci_hcd
0000:00:1d.7: EHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.564396] ehci_hcd
0000:00:1d.7: new USB bus registered, assigned bus number 1
Oct 7 07:31:33 localhost kernel: [ 1.568340] ehci_hcd
0000:00:1d.7: cache line size of 128 is not supported
Oct 7 07:31:33 localhost kernel: [ 1.568374] ehci_hcd
0000:00:1d.7: irq 23, io mem 0xf8000000
Oct 7 07:31:33 localhost kernel: [ 1.572553] 8139cp: 10/100 PCI
Ethernet driver v1.3 (Mar 22, 2004)
Oct 7 07:31:33 localhost kernel: [ 1.572598] 8139cp 0000:02:05.0:
This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use
8139too
Oct 7 07:31:33 localhost kernel: [ 1.592549] ehci_hcd
0000:00:1d.7: USB 2.0 started, EHCI 1.00
Oct 7 07:31:33 localhost kernel: [ 1.592609] usb usb1: New USB
device found, idVendor=1d6b, idProduct=0002
Oct 7 07:31:33 localhost kernel: [ 1.592618] usb usb1: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Oct 7 07:31:33 localhost kernel: [ 1.592625] usb usb1: Product:
EHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.592632] usb usb1:
Manufacturer: Linux 2.6.32-5-686 ehci_hcd
Oct 7 07:31:33 localhost kernel: [ 1.592638] usb usb1:
SerialNumber: 0000:00:1d.7
Oct 7 07:31:33 localhost kernel: [ 1.592883] usb usb1:
configuration #1 chosen from 1 choice
Oct 7 07:31:33 localhost kernel: [ 1.592975] hub 1-0:1.0: USB hub found
Oct 7 07:31:33 localhost kernel: [ 1.592998] hub 1-0:1.0: 8 ports detected
Oct 7 07:31:33 localhost kernel: [ 1.603814] thermal LNXTHERM:01:
registered as thermal_zone0
Oct 7 07:31:33 localhost kernel: [ 1.603841] ACPI: Thermal Zone
[THRM] (43 C)
Oct 7 07:31:33 localhost kernel: [ 1.609528] sata_via
0000:02:01.0: version 2.4
Oct 7 07:31:33 localhost kernel: [ 1.609573] sata_via
0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 7 07:31:33 localhost kernel: [ 1.609676] sata_via
0000:02:01.0: routed to hard irq line 11
Oct 7 07:31:33 localhost kernel: [ 1.612829] scsi0 : sata_via
Oct 7 07:31:33 localhost kernel: [ 1.617320] scsi1 : sata_via
Oct 7 07:31:33 localhost kernel: [ 1.617663] scsi2 : sata_via
Oct 7 07:31:33 localhost kernel: [ 1.617785] ata1: SATA max
UDMA/133 port i16@0xd000 bmdma 0xd400 irq 18
Oct 7 07:31:33 localhost kernel: [ 1.617795] ata2: SATA max
UDMA/133 port i16@0xd100 bmdma 0xd408 irq 18
Oct 7 07:31:33 localhost kernel: [ 1.617802] ata3: PATA max
UDMA/133 port i16@0xd200 bmdma 0xd410 irq 18
Oct 7 07:31:33 localhost kernel: [ 1.618759] uhci_hcd: USB
Universal Host Controller Interface driver
Oct 7 07:31:33 localhost kernel: [ 1.618867] uhci_hcd
0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 7 07:31:33 localhost kernel: [ 1.618886] uhci_hcd
0000:00:1d.0: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.618895] uhci_hcd
0000:00:1d.0: UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.618923] uhci_hcd
0000:00:1d.0: new USB bus registered, assigned bus number 2
Oct 7 07:31:33 localhost kernel: [ 1.618977] uhci_hcd
0000:00:1d.0: irq 16, io base 0x0000e300
Oct 7 07:31:33 localhost kernel: [ 1.619068] usb usb2: New USB
device found, idVendor=1d6b, idProduct=0001
Oct 7 07:31:33 localhost kernel: [ 1.619076] usb usb2: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Oct 7 07:31:33 localhost kernel: [ 1.619083] usb usb2: Product:
UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.619089] usb usb2:
Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 7 07:31:33 localhost kernel: [ 1.619096] usb usb2:
SerialNumber: 0000:00:1d.0
Oct 7 07:31:33 localhost kernel: [ 1.619410] usb usb2:
configuration #1 chosen from 1 choice
Oct 7 07:31:33 localhost kernel: [ 1.619583] hub 2-0:1.0: USB hub found
Oct 7 07:31:33 localhost kernel: [ 1.619604] hub 2-0:1.0: 2 ports detected
Oct 7 07:31:33 localhost kernel: [ 1.619726] uhci_hcd
0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 7 07:31:33 localhost kernel: [ 1.619740] uhci_hcd
0000:00:1d.1: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.619748] uhci_hcd
0000:00:1d.1: UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.619770] uhci_hcd
0000:00:1d.1: new USB bus registered, assigned bus number 3
Oct 7 07:31:33 localhost kernel: [ 1.619817] uhci_hcd
0000:00:1d.1: irq 19, io base 0x0000e000
Oct 7 07:31:33 localhost kernel: [ 1.619895] usb usb3: New USB
device found, idVendor=1d6b, idProduct=0001
Oct 7 07:31:33 localhost kernel: [ 1.619904] usb usb3: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Oct 7 07:31:33 localhost kernel: [ 1.619910] usb usb3: Product:
UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.619916] usb usb3:
Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 7 07:31:33 localhost kernel: [ 1.619923] usb usb3:
SerialNumber: 0000:00:1d.1
Oct 7 07:31:33 localhost kernel: [ 1.620227] usb usb3:
configuration #1 chosen from 1 choice
Oct 7 07:31:33 localhost kernel: [ 1.620326] hub 3-0:1.0: USB hub found
Oct 7 07:31:33 localhost kernel: [ 1.620346] hub 3-0:1.0: 2 ports detected
Oct 7 07:31:33 localhost kernel: [ 1.620711] uhci_hcd
0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 7 07:31:33 localhost kernel: [ 1.620731] uhci_hcd
0000:00:1d.2: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.620741] uhci_hcd
0000:00:1d.2: UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.620768] uhci_hcd
0000:00:1d.2: new USB bus registered, assigned bus number 4
Oct 7 07:31:33 localhost kernel: [ 1.620809] uhci_hcd
0000:00:1d.2: irq 18, io base 0x0000e100
Oct 7 07:31:33 localhost kernel: [ 1.620898] usb usb4: New USB
device found, idVendor=1d6b, idProduct=0001
Oct 7 07:31:33 localhost kernel: [ 1.620907] usb usb4: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Oct 7 07:31:33 localhost kernel: [ 1.620916] usb usb4: Product:
UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.620923] usb usb4:
Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 7 07:31:33 localhost kernel: [ 1.620929] usb usb4:
SerialNumber: 0000:00:1d.2
Oct 7 07:31:33 localhost kernel: [ 1.621151] usb usb4:
configuration #1 chosen from 1 choice
Oct 7 07:31:33 localhost kernel: [ 1.621241] hub 4-0:1.0: USB hub found
Oct 7 07:31:33 localhost kernel: [ 1.621271] hub 4-0:1.0: 2 ports detected
Oct 7 07:31:33 localhost kernel: [ 1.621400] uhci_hcd
0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 7 07:31:33 localhost kernel: [ 1.621415] uhci_hcd
0000:00:1d.3: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.621423] uhci_hcd
0000:00:1d.3: UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.621444] uhci_hcd
0000:00:1d.3: new USB bus registered, assigned bus number 5
Oct 7 07:31:33 localhost kernel: [ 1.621480] uhci_hcd
0000:00:1d.3: irq 16, io base 0x0000e200
Oct 7 07:31:33 localhost kernel: [ 1.621555] usb usb5: New USB
device found, idVendor=1d6b, idProduct=0001
Oct 7 07:31:33 localhost kernel: [ 1.621564] usb usb5: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Oct 7 07:31:33 localhost kernel: [ 1.621571] usb usb5: Product:
UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.621577] usb usb5:
Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 7 07:31:33 localhost kernel: [ 1.621583] usb usb5:
SerialNumber: 0000:00:1d.3
Oct 7 07:31:33 localhost kernel: [ 1.621752] usb usb5:
configuration #1 chosen from 1 choice
Oct 7 07:31:33 localhost kernel: [ 1.621836] hub 5-0:1.0: USB hub found
Oct 7 07:31:33 localhost kernel: [ 1.621855] hub 5-0:1.0: 2 ports detected
Oct 7 07:31:33 localhost kernel: [ 1.622758] ata_piix
0000:00:1f.1: version 2.13
Oct 7 07:31:33 localhost kernel: [ 1.622783] ata_piix
0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 7 07:31:33 localhost kernel: [ 1.622868] ata_piix
0000:00:1f.1: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.623020] scsi3 : ata_piix
Oct 7 07:31:33 localhost kernel: [ 1.623329] scsi4 : ata_piix
Oct 7 07:31:33 localhost kernel: [ 1.625508] ata4: PATA max
UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
Oct 7 07:31:33 localhost kernel: [ 1.625517] ata5: PATA max
UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Oct 7 07:31:33 localhost kernel: [ 1.629189] 8139too Fast Ethernet
driver 0.9.28
Oct 7 07:31:33 localhost kernel: [ 1.629295] 8139too 0000:02:05.0:
PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 7 07:31:33 localhost kernel: [ 1.632347] eth0: RealTek RTL8139
at 0xd600, 00:04:61:6e:b0:23, IRQ 22
Oct 7 07:31:33 localhost kernel: [ 1.647349] fan PNP0C0B:00:
registered as cooling_device0
Oct 7 07:31:33 localhost kernel: [ 1.647369] ACPI: Fan [FAN] (on)
Oct 7 07:31:33 localhost kernel: [ 1.788817] ata4.00: ATA-7:
Maxtor 6Y160P0, YAR41BW0, max UDMA/133
Oct 7 07:31:33 localhost kernel: [ 1.788826] ata4.00: 320173056
sectors, multi 16: LBA48
Oct 7 07:31:33 localhost kernel: [ 1.788896] ata4.01: ATAPI:
HL-DT-ST GCE-8520B, 1.02, max UDMA/33
Oct 7 07:31:33 localhost kernel: [ 1.804451] ata4.00: configured
for UDMA/100
Oct 7 07:31:33 localhost kernel: [ 1.812396] ata4.01: configured for UDMA/33
Oct 7 07:31:33 localhost kernel: [ 1.841292] ata5.00: ATA-7:
ST3320620A, 3.AAC, max UDMA/100
Oct 7 07:31:33 localhost kernel: [ 1.841300] ata5.00: 625142448
sectors, multi 16: LBA48
Oct 7 07:31:33 localhost kernel: [ 1.841370] ata5.01: ATAPI:
HL-DT-STDVD-ROM GDR8161B, 0100, max UDMA/33
Oct 7 07:31:33 localhost kernel: [ 1.916106] ata5.00: configured
for UDMA/100
Oct 7 07:31:33 localhost kernel: [ 1.932241] ata5.01: configured for UDMA/33
Oct 7 07:31:33 localhost kernel: [ 1.936057] ata1: SATA link up
1.5 Gbps (SStatus 113 SControl 310)
Oct 7 07:31:33 localhost kernel: [ 1.944510] ata1.00: ATA-7:
HTS721080G9SA00, MC4OC10H, max UDMA/100
Oct 7 07:31:33 localhost kernel: [ 1.944516] ata1.00: 156301488
sectors, multi 16: LBA48 NCQ (depth 0/32)
Oct 7 07:31:33 localhost kernel: [ 1.960555] ata1.00: configured
for UDMA/100
Oct 7 07:31:33 localhost kernel: [ 1.960771] scsi 0:0:0:0:
Direct-Access ATA HTS721080G9SA00 MC4O PQ: 0 ANSI: 5
Oct 7 07:31:33 localhost kernel: [ 2.290963] ata2: SATA link down
(SStatus 0 SControl 310)
Oct 7 07:31:33 localhost kernel: [ 2.455797] scsi 3:0:0:0:
Direct-Access ATA Maxtor 6Y160P0 YAR4 PQ: 0 ANSI: 5
Oct 7 07:31:33 localhost kernel: [ 2.456401] scsi 3:0:1:0: CD-ROM
HL-DT-ST CD-RW GCE-8520B 1.02 PQ: 0 ANSI: 5
Oct 7 07:31:33 localhost kernel: [ 2.456852] scsi 4:0:0:0:
Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5
Oct 7 07:31:33 localhost kernel: [ 2.469834] scsi 4:0:1:0: CD-ROM
HL-DT-ST DVD-ROM GDR8161B 0100 PQ: 0 ANSI: 5
Oct 7 07:31:33 localhost kernel: [ 2.502575] sd 0:0:0:0: [sda]
156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Oct 7 07:31:33 localhost kernel: [ 2.502743] sd 3:0:0:0: [sdb]
320173056 512-byte logical blocks: (163 GB/152 GiB)
Oct 7 07:31:33 localhost kernel: [ 2.502992] sd 4:0:0:0: [sdc]
625142448 512-byte logical blocks: (320 GB/298 GiB)
Oct 7 07:31:33 localhost kernel: [ 2.503009] sd 3:0:0:0: [sdb]
Write Protect is off
Oct 7 07:31:33 localhost kernel: [ 2.503020] sd 3:0:0:0: [sdb]
Mode Sense: 00 3a 00 00
Oct 7 07:31:33 localhost kernel: [ 2.503154] sd 0:0:0:0: [sda]
Write Protect is off
Oct 7 07:31:33 localhost kernel: [ 2.503164] sd 0:0:0:0: [sda]
Mode Sense: 00 3a 00 00
Oct 7 07:31:33 localhost kernel: [ 2.503202] sd 4:0:0:0: [sdc]
Write Protect is off
Oct 7 07:31:33 localhost kernel: [ 2.503212] sd 4:0:0:0: [sdc]
Mode Sense: 00 3a 00 00
Oct 7 07:31:33 localhost kernel: [ 2.503221] sd 3:0:0:0: [sdb]
Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 7 07:31:33 localhost kernel: [ 2.503301] sd 4:0:0:0: [sdc]
Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 7 07:31:33 localhost kernel: [ 2.503434] sd 0:0:0:0: [sda]
Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 7 07:31:33 localhost kernel: [ 2.503814] sdc:
Oct 7 07:31:33 localhost kernel: [ 2.504162] sdb:
Oct 7 07:31:33 localhost kernel: [ 2.504648] sda: sdc1 sdc2 sdc3
sdc4 < sdb1 sdb2 sdb3 sdb4 < sdc5 sdb5 sdc6 sdb6 sdc7 sdc8 sdb7 >
Oct 7 07:31:33 localhost kernel: [ 2.568371] sr0: scsi3-mmc drive:
40x/40x writer cd/rw xa/form2 cdda tray
Oct 7 07:31:33 localhost kernel: [ 2.568379] Uniform CD-ROM driver
Revision: 3.20
Oct 7 07:31:33 localhost kernel: [ 2.568609] sr 3:0:1:0: Attached
scsi CD-ROM sr0
Oct 7 07:31:33 localhost kernel: [ 2.577028] sdc9 sdc10 >
Oct 7 07:31:33 localhost kernel: [ 2.591195] sd 3:0:0:0: [sdb]
Attached SCSI disk
Oct 7 07:31:33 localhost kernel: [ 2.593037] sd 4:0:0:0: [sdc]
Attached SCSI disk
Oct 7 07:31:33 localhost kernel: [ 2.593083] sr1: scsi3-mmc drive:
20x/48x cd/rw xa/form2 cdda tray
Oct 7 07:31:33 localhost kernel: [ 2.593359] sr 4:0:1:0: Attached
scsi CD-ROM sr1
Oct 7 07:31:33 localhost kernel: [ 2.842218] sda1 sda2 sda3 sda4
Oct 7 07:31:33 localhost kernel: [ 2.843084] sd 0:0:0:0: [sda]
Attached SCSI disk
Oct 7 07:31:33 localhost kernel: [ 2.869793] sd 0:0:0:0: Attached
scsi generic sg0 type 0
Oct 7 07:31:33 localhost kernel: [ 2.871106] sd 3:0:0:0: Attached
scsi generic sg1 type 0
Oct 7 07:31:33 localhost kernel: [ 2.872523] sr 3:0:1:0: Attached
scsi generic sg2 type 5
Oct 7 07:31:33 localhost kernel: [ 2.874171] sd 4:0:0:0: Attached
scsi generic sg3 type 0
Oct 7 07:31:33 localhost kernel: [ 2.877171] sr 4:0:1:0: Attached
scsi generic sg4 type 5
Oct 7 07:31:33 localhost kernel: [ 3.357810] device-mapper:
uevent: version 1.0.3
Oct 7 07:31:33 localhost kernel: [ 3.358171] device-mapper: ioctl:
4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Oct 7 07:31:33 localhost kernel: [ 3.781871] md: raid1 personality
registered for level 1
Oct 7 07:31:33 localhost kernel: [ 3.899277] md: md0 stopped.
Oct 7 07:31:33 localhost kernel: [ 3.905068] md: bind<sdc3>
Oct 7 07:31:33 localhost kernel: [ 3.927389] md: bind<sdb3>
Oct 7 07:31:33 localhost kernel: [ 3.931875] raid1: raid set md0
active with 2 out of 2 mirrors
Oct 7 07:31:33 localhost kernel: [ 3.931940] md0: detected
capacity change from 0 to 22544369664
Oct 7 07:31:33 localhost kernel: [ 3.934092] md0: unknown partition table
Oct 7 07:31:33 localhost kernel: [ 4.155992] md: md1 stopped.
Oct 7 07:31:33 localhost kernel: [ 4.159757] md: bind<sdc5>
Oct 7 07:31:33 localhost kernel: [ 4.160165] md: bind<sdb6>
Oct 7 07:31:33 localhost kernel: [ 4.165131] raid1: raid set md1
active with 2 out of 2 mirrors
Oct 7 07:31:33 localhost kernel: [ 4.165224] md1: detected
capacity change from 0 to 103086279680
Oct 7 07:31:33 localhost kernel: [ 4.168117] md1: unknown partition table
Oct 7 07:31:33 localhost kernel: [ 4.377031] PM: Starting manual
resume from disk
Oct 7 07:31:33 localhost kernel: [ 4.377041] PM: Resume from partition 8:18
Oct 7 07:31:33 localhost kernel: [ 4.377045] PM: Checking hibernation image.
Oct 7 07:31:33 localhost kernel: [ 4.377330] PM: Error -22
checking image file
Oct 7 07:31:33 localhost kernel: [ 4.377334] PM: Resume from disk failed.
Oct 7 07:31:33 localhost kernel: [ 4.431482] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 4.431505] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 5.664439] udev[374]: starting version 164
Oct 7 07:31:33 localhost kernel: [ 6.024306] pci_hotplug: PCI Hot
Plug PCI Core version: 0.5
Oct 7 07:31:33 localhost kernel: [ 6.169280] processor LNXCPU:00:
registered as cooling_device1
Oct 7 07:31:33 localhost kernel: [ 6.169408] processor LNXCPU:01:
registered as cooling_device2
Oct 7 07:31:33 localhost kernel: [ 6.206206] intel_rng: FWH not detected
Oct 7 07:31:33 localhost kernel: [ 6.206860] input: Power Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
Oct 7 07:31:33 localhost kernel: [ 6.206882] ACPI: Power Button [PWRB]
Oct 7 07:31:33 localhost kernel: [ 6.207101] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Oct 7 07:31:33 localhost kernel: [ 6.207114] ACPI: Power Button [PWRF]
Oct 7 07:31:33 localhost kernel: [ 6.207307] shpchp: Standard Hot
Plug PCI Controller Driver version: 0.4
Oct 7 07:31:33 localhost kernel: [ 6.265999] input: PC Speaker as
/devices/platform/pcspkr/input/input3
Oct 7 07:31:33 localhost kernel: [ 6.813033] [drm] Initialized drm
1.1.0 20060810
Oct 7 07:31:33 localhost kernel: [ 6.869874] gameport: NS558 PnP
Gameport is pnp00:08/gameport0, io 0x200, speed 795kHz
Oct 7 07:31:33 localhost kernel: [ 7.281055] i801_smbus
0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 7 07:31:33 localhost kernel: [ 7.438113] Intel ICH
0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 7 07:31:33 localhost kernel: [ 7.438201] Intel ICH
0000:00:1f.5: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 7.716648] [drm] radeon kernel
modesetting enabled.
Oct 7 07:31:33 localhost kernel: [ 7.716771] radeon 0000:01:00.0:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 7 07:31:33 localhost kernel: [ 7.721074] [drm] radeon:
Initializing kernel modesetting.
Oct 7 07:31:33 localhost kernel: [ 7.721315] [drm] register mmio
base: 0xF5000000
Oct 7 07:31:33 localhost kernel: [ 7.721321] [drm] register mmio size: 65536
Oct 7 07:31:33 localhost kernel: [ 7.724666] [drm] GPU reset
succeed (RBBM_STATUS=0x00000140)
Oct 7 07:31:33 localhost kernel: [ 7.724714] [drm] Generation 2
PCI interface, using max accessible memory
Oct 7 07:31:33 localhost kernel: [ 7.724741] agpgart-intel
0000:00:00.0: AGP 3.0 bridge
Oct 7 07:31:33 localhost kernel: [ 7.724785] agpgart-intel
0000:00:00.0: putting AGP V3 device into 8x mode
Oct 7 07:31:33 localhost kernel: [ 7.724868] radeon 0000:01:00.0:
putting AGP V3 device into 8x mode
Oct 7 07:31:33 localhost kernel: [ 7.724922] [drm] radeon: VRAM 128M
Oct 7 07:31:33 localhost kernel: [ 7.724929] [drm] radeon: VRAM
from 0x00000000 to 0x07FFFFFF
Oct 7 07:31:33 localhost kernel: [ 7.724934] [drm] radeon: GTT 64M
Oct 7 07:31:33 localhost kernel: [ 7.724939] [drm] radeon: GTT
from 0xF0000000 to 0xF3FFFFFF
Oct 7 07:31:33 localhost kernel: [ 7.724981] [drm] radeon: irq initialized.
Oct 7 07:31:33 localhost kernel: [ 7.725605] [drm] Detected VRAM
RAM=128M, BAR=128M
Oct 7 07:31:33 localhost kernel: [ 7.725616] [drm] RAM width 64bits DDR
Oct 7 07:31:33 localhost kernel: [ 7.725808] [TTM] Zone kernel:
Available graphics memory: 441424 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.725816] [TTM] Zone highmem:
Available graphics memory: 1037364 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.725863] [drm] radeon: 128M of
VRAM memory ready
Oct 7 07:31:33 localhost kernel: [ 7.725871] [drm] radeon: 64M of
GTT memory ready.
Oct 7 07:31:33 localhost kernel: [ 7.726134] [drm] radeon: cp idle
(0x02000603)
Oct 7 07:31:33 localhost kernel: [ 7.726219] [drm] Loading R200 Microcode
Oct 7 07:31:33 localhost kernel: [ 7.726935] platform radeon_cp.0:
firmware: requesting radeon/R200_cp.bin
Oct 7 07:31:33 localhost kernel: [ 7.741316] input: ImExPS/2
Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
Oct 7 07:31:33 localhost kernel: [ 7.761029]
intel8x0_measure_ac97_clock: measured 54424 usecs (2623 samples)
Oct 7 07:31:33 localhost kernel: [ 7.761037] intel8x0: clocking to 48000
Oct 7 07:31:33 localhost kernel: [ 7.768623] radeon_cp: Failed to
load firmware "radeon/R200_cp.bin"
Oct 7 07:31:33 localhost kernel: [ 7.768695] [drm:r100_cp_init]
*ERROR* Failed to load firmware!
Oct 7 07:31:33 localhost kernel: [ 7.768764] radeon 0000:01:00.0:
failled initializing CP (-2).
Oct 7 07:31:33 localhost kernel: [ 7.768828] radeon 0000:01:00.0:
Disabling GPU acceleration
Oct 7 07:31:33 localhost kernel: [ 7.768886] [drm] radeon: cp finalized
Oct 7 07:31:33 localhost kernel: [ 7.769116] [drm] GPU reset
succeed (RBBM_STATUS=0x00000140)
Oct 7 07:31:33 localhost kernel: [ 7.769128] [drm] radeon: cp finalized
Oct 7 07:31:33 localhost kernel: [ 7.769256] [TTM] Zone kernel:
Used memory at exit: 0 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.769273] [TTM] Zone highmem:
Used memory at exit: 0 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.769284] [drm] radeon: ttm finalized
Oct 7 07:31:33 localhost kernel: [ 7.769293] [drm] Forcing AGP to PCI mode
Oct 7 07:31:33 localhost kernel: [ 7.773016] [drm] GPU reset
succeed (RBBM_STATUS=0x00000140)
Oct 7 07:31:33 localhost kernel: [ 7.773035] [drm] Generation 2
PCI interface, using max accessible memory
Oct 7 07:31:33 localhost kernel: [ 7.773043] [drm] radeon: VRAM 128M
Oct 7 07:31:33 localhost kernel: [ 7.773049] [drm] radeon: VRAM
from 0x00000000 to 0x07FFFFFF
Oct 7 07:31:33 localhost kernel: [ 7.773054] [drm] radeon: GTT 512M
Oct 7 07:31:33 localhost kernel: [ 7.773060] [drm] radeon: GTT
from 0x20000000 to 0x3FFFFFFF
Oct 7 07:31:33 localhost kernel: [ 7.773450] [drm] radeon: irq initialized.
Oct 7 07:31:33 localhost kernel: [ 7.773467] [drm] Detected VRAM
RAM=128M, BAR=128M
Oct 7 07:31:33 localhost kernel: [ 7.773474] [drm] RAM width 64bits DDR
Oct 7 07:31:33 localhost kernel: [ 7.775666] [TTM] Zone kernel:
Available graphics memory: 441424 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.775674] [TTM] Zone highmem:
Available graphics memory: 1037364 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.775711] [drm] radeon: 128M of
VRAM memory ready
Oct 7 07:31:33 localhost kernel: [ 7.775718] [drm] radeon: 512M of
GTT memory ready.
Oct 7 07:31:33 localhost kernel: [ 7.775726] [drm] GART: num cpu
pages 131072, num gpu pages 131072
Oct 7 07:31:33 localhost kernel: [ 7.778310] [drm] radeon: cp idle
(0x02000603)
Oct 7 07:31:33 localhost kernel: [ 7.778398] [drm] Loading R200 Microcode
Oct 7 07:31:33 localhost kernel: [ 7.778407] platform radeon_cp.0:
firmware: requesting radeon/R200_cp.bin
Oct 7 07:31:33 localhost kernel: [ 7.804563] radeon_cp: Failed to
load firmware "radeon/R200_cp.bin"
Oct 7 07:31:33 localhost kernel: [ 7.804646] [drm:r100_cp_init]
*ERROR* Failed to load firmware!
Oct 7 07:31:33 localhost kernel: [ 7.804718] radeon 0000:01:00.0:
failled initializing CP (-2).
Oct 7 07:31:33 localhost kernel: [ 7.804781] radeon 0000:01:00.0:
Disabling GPU acceleration
Oct 7 07:31:33 localhost kernel: [ 7.804842] [drm] radeon: cp finalized
Oct 7 07:31:33 localhost kernel: [ 7.806341] [drm] Default TV standard: PAL
Oct 7 07:31:33 localhost kernel: [ 7.806348] [drm] 27.000000000
MHz TV ref clk
Oct 7 07:31:33 localhost kernel: [ 7.806356] [drm] Default TV standard: PAL
Oct 7 07:31:33 localhost kernel: [ 7.806360] [drm] 27.000000000
MHz TV ref clk
Oct 7 07:31:33 localhost kernel: [ 7.806460] [drm] Radeon Display Connectors
Oct 7 07:31:33 localhost kernel: [ 7.806466] [drm] Connector 0:
Oct 7 07:31:33 localhost kernel: [ 7.806470] [drm] VGA
Oct 7 07:31:33 localhost kernel: [ 7.806478] [drm] DDC: 0x60
0x60 0x60 0x60 0x60 0x60 0x60 0x60
Oct 7 07:31:33 localhost kernel: [ 7.806485] [drm] Encoders:
Oct 7 07:31:33 localhost kernel: [ 7.806490] [drm] CRT1: INTERNAL_DAC1
Oct 7 07:31:33 localhost kernel: [ 7.806495] [drm] Connector 1:
Oct 7 07:31:33 localhost kernel: [ 7.806499] [drm] S-video
Oct 7 07:31:33 localhost kernel: [ 7.806503] [drm] Encoders:
Oct 7 07:31:33 localhost kernel: [ 7.806508] [drm] TV1: INTERNAL_DAC2
Oct 7 07:31:33 localhost kernel: [ 7.965173] [drm] fb mappable at 0xE0040000
Oct 7 07:31:33 localhost kernel: [ 7.965179] [drm] vram apper at 0xE0000000
Oct 7 07:31:33 localhost kernel: [ 7.965182] [drm] size 3145728
Oct 7 07:31:33 localhost kernel: [ 7.965186] [drm] fb depth is 24
Oct 7 07:31:33 localhost kernel: [ 7.965190] [drm] pitch is 4096
Oct 7 07:31:33 localhost kernel: [ 8.045075] Console: switching to
colour frame buffer device 128x48
Oct 7 07:31:33 localhost kernel: [ 8.072282] fb0: radeondrmfb
frame buffer device
Oct 7 07:31:33 localhost kernel: [ 8.072290] registered panic notifier
Oct 7 07:31:33 localhost kernel: [ 8.076166] [drm] Initialized
radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
Oct 7 07:31:33 localhost kernel: [ 8.850542] Adding 1052248k swap
on /dev/sdb2. Priority:-1 extents:1 across:1052248k
Oct 7 07:31:33 localhost kernel: [ 10.158906] EXT3 FS on md0,
internal journal
Oct 7 07:31:33 localhost kernel: [ 10.284475] loop: module loaded
Oct 7 07:31:33 localhost kernel: [ 14.007785] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 14.007990] EXT3 FS on sda1,
internal journal
Oct 7 07:31:33 localhost kernel: [ 14.008001] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 14.306731] EXT4-fs (md1):
mounted filesystem with ordered data mode
Oct 7 07:31:33 localhost kernel: [ 14.371752] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 14.371918] EXT3 FS on sdc7,
internal journal
Oct 7 07:31:33 localhost kernel: [ 14.371929] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 14.484779] EXT4-fs (sda3):
mounted filesystem with ordered data mode
Oct 7 07:31:33 localhost kernel: [ 14.665334] EXT4-fs (sdc8):
mounted filesystem with ordered data mode
Oct 7 07:31:33 localhost kernel: [ 14.704427] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 14.704775] EXT3 FS on sdb7,
internal journal
Oct 7 07:31:33 localhost kernel: [ 14.704785] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 14.794203] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 14.794376] EXT3 FS on sdc9,
internal journal
Oct 7 07:31:33 localhost kernel: [ 14.794386] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 14.881949] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 14.882271] EXT3 FS on sda2,
internal journal
Oct 7 07:31:33 localhost kernel: [ 14.882281] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 15.975485] fuse init (API version 7.13)
Oct 7 07:31:33 localhost kernel: [ 16.450975] eth0: link up,
100Mbps, full-duplex, lpa 0x45E1
Oct 7 07:31:33 localhost acpid: starting up with netlink and the input layer
Oct 7 07:31:33 localhost acpid: 1 rule loaded
Oct 7 07:31:33 localhost acpid: waiting for events: event logging is off
Oct 7 07:31:33 localhost /usr/sbin/cron[1519]: (CRON) INFO (pidfile fd = 3)
Oct 7 07:31:33 localhost /usr/sbin/cron[1586]: (CRON) STARTUP (fork ok)
Oct 7 07:31:34 localhost /usr/sbin/cron[1586]: (CRON) INFO (Running
@reboot jobs)
Oct 7 07:31:35 localhost dhclient: DHCPDISCOVER on eth0 to
255.255.255.255 port 67 interval 4
Oct 7 07:31:35 localhost dhclient: DHCPOFFER from 192.168.0.1
Oct 7 07:31:35 localhost dhclient: DHCPREQUEST on eth0 to
255.255.255.255 port 67
Oct 7 07:31:35 localhost dhclient: DHCPACK from 192.168.0.1
Oct 7 07:31:35 localhost acpid: client connected from 1853[105:109]
Oct 7 07:31:35 localhost acpid: 1 client rule loaded
Oct 7 07:31:35 localhost dhclient: bound to 192.168.0.2 -- renewal in
40470 seconds.
Oct 7 07:31:36 localhost kernel: [ 19.932080] ip_tables: (C)
2000-2006 Netfilter Core Team
Oct 7 07:31:38 localhost dhclient: isc-dhclient-4.1.1-P1
Oct 7 07:31:38 localhost dhclient: isc-dhclient-4.1.1-P1
Oct 7 07:31:41 localhost acpid: client connected from 1954[0:0]
Oct 7 07:31:41 localhost acpid: 1 client rule loaded
Oct 7 07:31:42 localhost kernel: [ 26.564020] eth0: no IPv6 routers present
Oct 7 07:35:01 localhost /USR/SBIN/CRON[2543]: (root) CMD (command -v
debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 7 07:45:01 localhost /USR/SBIN/CRON[2667]: (root) CMD (command -v
debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 7 07:45:13 localhost kernel: [ 837.252028] usb 1-3: new high
speed USB device using ehci_hcd and address 2
Oct 7 07:45:13 localhost kernel: [ 837.388323] usb 1-3: New USB
device found, idVendor=1058, idProduct=0901
Oct 7 07:45:13 localhost kernel: [ 837.388331] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 7 07:45:13 localhost kernel: [ 837.388337] usb 1-3: Product: External HDD
Oct 7 07:45:13 localhost kernel: [ 837.388341] usb 1-3:
Manufacturer: Western Digital
Oct 7 07:45:13 localhost kernel: [ 837.388345] usb 1-3:
SerialNumber: 57442D5743414E4B43383633333636
Oct 7 07:45:13 localhost kernel: [ 837.388545] usb 1-3:
configuration #1 chosen from 1 choice
Oct 7 07:45:13 localhost kernel: [ 837.465606] Initializing USB Mass
Storage driver...
Oct 7 07:45:13 localhost kernel: [ 837.466078] scsi5 : SCSI
emulation for USB Mass Storage devices
Oct 7 07:45:13 localhost kernel: [ 837.466472] usbcore: registered
new interface driver usb-storage
Oct 7 07:45:13 localhost kernel: [ 837.466483] USB Mass Storage
support registered.
Oct 7 07:45:13 localhost kernel: [ 837.467296] usb-storage: device found at 2
Oct 7 07:45:13 localhost kernel: [ 837.467302] usb-storage: waiting
for device to settle before scanning
Oct 7 07:45:18 localhost kernel: [ 842.464346] usb-storage: device
scan complete
Oct 7 07:45:18 localhost kernel: [ 842.499677] scsi 5:0:0:0:
Direct-Access WD 2500JB External 0108 PQ: 0 ANSI: 0
Oct 7 07:45:18 localhost kernel: [ 842.500770] sd 5:0:0:0: Attached
scsi generic sg5 type 0
Oct 7 07:45:18 localhost kernel: [ 842.502554] sd 5:0:0:0: [sdd]
488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 7 07:45:18 localhost kernel: [ 842.503407] sd 5:0:0:0: [sdd]
Write Protect is off
Oct 7 07:45:18 localhost kernel: [ 842.503419] sd 5:0:0:0: [sdd]
Mode Sense: 03 00 00 00
Oct 7 07:45:18 localhost kernel: [ 842.503427] sd 5:0:0:0: [sdd]
Assuming drive cache: write through
Oct 7 07:45:18 localhost kernel: [ 842.510082] sd 5:0:0:0: [sdd]
Assuming drive cache: write through
Oct 7 07:45:18 localhost kernel: [ 842.510099] sdd: sdd1 sdd2 sdd3 sdd4
Oct 7 07:45:18 localhost kernel: [ 842.517314] sd 5:0:0:0: [sdd]
Assuming drive cache: write through
Oct 7 07:45:18 localhost kernel: [ 842.517332] sd 5:0:0:0: [sdd]
Attached SCSI disk
Oct 7 07:47:30 localhost acpid: client 1954[0:0] has disconnected
Oct 7 07:47:30 localhost acpid: client connected from 2810[0:0]
Oct 7 07:47:30 localhost acpid: 1 client rule loaded
Oct 7 07:49:36 localhost kernel: [ 1099.881872] EXT4-fs (sdd1):
mounted filesystem with ordered data mode
Oct 7 07:49:37 localhost kernel: [ 1101.497717] EXT4-fs (sdd2):
recovery complete
Oct 7 07:49:37 localhost kernel: [ 1101.497728] EXT4-fs (sdd2):
mounted filesystem with ordered data mode
Oct 7 07:54:43 localhost kernel: [ 1406.865500] usb 1-3: USB
disconnect, address 2
Oct 7 07:54:43 localhost kernel: [ 1407.144039] usb 1-3: new high
speed USB device using ehci_hcd and address 3
Oct 7 07:54:43 localhost kernel: [ 1407.280124] usb 1-3: New USB
device found, idVendor=1058, idProduct=0901
Oct 7 07:54:43 localhost kernel: [ 1407.280132] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 7 07:54:43 localhost kernel: [ 1407.280138] usb 1-3: Product: External HDD
Oct 7 07:54:43 localhost kernel: [ 1407.280142] usb 1-3:
Manufacturer: Western Digital
Oct 7 07:54:43 localhost kernel: [ 1407.280147] usb 1-3:
SerialNumber: 57442D5743414E4B43383633333636
Oct 7 07:54:43 localhost kernel: [ 1407.280351] usb 1-3:
configuration #1 chosen from 1 choice
Oct 7 07:54:43 localhost kernel: [ 1407.281417] scsi6 : SCSI
emulation for USB Mass Storage devices
Oct 7 07:54:43 localhost kernel: [ 1407.281875] usb-storage: device found at 3
Oct 7 07:54:43 localhost kernel: [ 1407.281883] usb-storage: waiting
for device to settle before scanning
Oct 7 07:54:48 localhost kernel: [ 1412.281305] usb-storage: device
scan complete
Oct 7 07:54:48 localhost kernel: [ 1412.316637] scsi 6:0:0:0:
Direct-Access WD 2500JB External 0108 PQ: 0 ANSI: 0
Oct 7 07:54:48 localhost kernel: [ 1412.318026] sd 6:0:0:0: Attached
scsi generic sg5 type 0
Oct 7 07:54:48 localhost kernel: [ 1412.319910] sd 6:0:0:0: [sde]
488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 7 07:54:48 localhost kernel: [ 1412.320739] sd 6:0:0:0: [sde]
Write Protect is off
Oct 7 07:54:48 localhost kernel: [ 1412.320754] sd 6:0:0:0: [sde]
Mode Sense: 03 00 00 00
Oct 7 07:54:48 localhost kernel: [ 1412.320761] sd 6:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 07:54:48 localhost kernel: [ 1412.322852] sd 6:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 07:54:48 localhost kernel: [ 1412.322866] sde: sde1 sde2 sde3 sde4
Oct 7 07:54:48 localhost kernel: [ 1412.339497] sd 6:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 07:54:48 localhost kernel: [ 1412.339510] sd 6:0:0:0: [sde]
Attached SCSI disk
Oct 7 07:54:49 localhost kernel: [ 1412.873626] EXT4-fs error (device
sdd2): ext4_find_entry: reading directory #2 offset 0
Oct 7 07:54:49 localhost kernel: [ 1412.873695] BUG: unable to handle
kernel paging request at 015ef000
Oct 7 07:54:49 localhost kernel: [ 1412.873706] IP: [<c1140c27>]
__percpu_counter_add+0x21/0x6d
Oct 7 07:54:49 localhost kernel: [ 1412.873727] *pde = 00000000
Oct 7 07:54:49 localhost kernel: [ 1412.873735] Oops: 0000 [#1] SMP
Oct 7 07:54:49 localhost kernel: [ 1412.873745] last sysfs file:
/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/block/sde/size
Oct 7 07:54:49 localhost kernel: [ 1412.873756] Modules linked in:
usb_storage xt_multiport iptable_filter ip_tables x_tables
speedstep_lib cpufreq_stats cpufreq_userspace cpufreq_conservative
cpufreq_powersave fuse ext2 ext4 jbd2 crc16 loop snd_wavefront
snd_cs4236 snd_wss_lib snd_opl3_lib snd_hwdep radeon snd_mpu401
snd_mpu401_uart snd_seq_midi snd_seq_midi_event snd_intel8x0
snd_ac97_codec ac97_bus snd_rawmidi snd_pcm snd_seq snd_timer
snd_seq_device i2c_i801 psmouse ttm snd ns558 drm_kms_helper drm
i2c_algo_bit pcspkr gameport soundcore serio_raw evdev snd_page_alloc
i2c_core button shpchp processor rng_core pci_hotplug ext3 jbd mbcache
raid1 md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod cdrom
sd_mod crc_t10dif ata_generic fan 8139too ata_piix uhci_hcd sata_via
thermal 8139cp mii ehci_hcd libata scsi_mod usbcore nls_base
thermal_sys [last unloaded: scsi_wait_scan]
Oct 7 07:54:49 localhost kernel: [ 1412.873949]
Oct 7 07:54:49 localhost kernel: [ 1412.873959] Pid: 2489, comm:
xfdesktop Not tainted (2.6.32-5-686 #1)
Oct 7 07:54:49 localhost kernel: [ 1412.873969] EIP:
0060:[<c1140c27>] EFLAGS: 00010006 CPU: 1
Oct 7 07:54:49 localhost kernel: [ 1412.873979] EIP is at
__percpu_counter_add+0x21/0x6d
Oct 7 07:54:49 localhost kernel: [ 1412.873987] EAX: 00000001 EBX:
f658600c ECX: 00000000 EDX: 00000001
Oct 7 07:54:49 localhost kernel: [ 1412.873994] ESI: f6a55728 EDI:
015ef000 EBP: 00000010 ESP: f6279cf4
Oct 7 07:54:49 localhost kernel: [ 1412.874001] DS: 007b ES: 007b
FS: 00d8 GS: 00e0 SS: 0068
Oct 7 07:54:49 localhost kernel: [ 1412.874010] Process xfdesktop
(pid: 2489, ti=f6278000 task=f6cf7b80 task.ti=f6278000)
Oct 7 07:54:49 localhost kernel: [ 1412.874016] Stack:
Oct 7 07:54:49 localhost kernel: [ 1412.874021] f658600c f6cf7b80
f6a55728 00000000 f71af400 c108d515 00000010 00000000
Oct 7 07:54:49 localhost kernel: [ 1412.874039] <0> c1bb45e0 c10cded2
00000000 f5e85d40 f5867200 f8c5da83 00000001 033d4acb
Oct 7 07:54:49 localhost kernel: [ 1412.874059] <0> 00000000 f5867200
f5867200 00000000 00000001 f8c60077 f6279d84 f8c601c8
Oct 7 07:54:49 localhost kernel: [ 1412.874081] Call Trace:
Oct 7 07:54:49 localhost kernel: [ 1412.874099] [<c108d515>] ?
account_page_dirtied+0x2f/0x4b
Oct 7 07:54:49 localhost kernel: [ 1412.874114] [<c10cded2>] ?
__set_page_dirty+0x44/0x82
Oct 7 07:54:49 localhost kernel: [ 1412.874156] [<f8c5da83>] ?
ext4_commit_super+0x114/0x160 [ext4]
Oct 7 07:54:49 localhost kernel: [ 1412.874188] [<f8c60077>] ?
ext4_handle_error+0x6f/0x8e [ext4]
Oct 7 07:54:49 localhost kernel: [ 1412.874219] [<f8c601c8>] ?
ext4_error+0x3a/0x40 [ext4]
Oct 7 07:54:49 localhost kernel: [ 1412.874250] [<f8c522a8>] ?
ext4_find_entry+0x3a9/0x517 [ext4]
Oct 7 07:54:49 localhost kernel: [ 1412.874269] [<c108c109>] ?
__alloc_pages_nodemask+0xf3/0x4d9
Oct 7 07:54:49 localhost kernel: [ 1412.874286] [<c10c1064>] ?
d_alloc+0x1b/0x154
Oct 7 07:54:49 localhost kernel: [ 1412.874316] [<f8c52cfb>] ?
ext4_lookup+0x24/0xae [ext4]
Oct 7 07:54:49 localhost kernel: [ 1412.874328] [<c10b9ca9>] ?
do_lookup+0xa6/0x116
Oct 7 07:54:49 localhost kernel: [ 1412.874339] [<c10ba518>] ?
__link_path_walk+0x4b7/0x5de
Oct 7 07:54:49 localhost kernel: [ 1412.874350] [<c10ba7f5>] ?
path_walk+0x4f/0xa3
Oct 7 07:54:49 localhost kernel: [ 1412.874362] [<c10bb971>] ?
do_path_lookup+0x1f/0x69
Oct 7 07:54:49 localhost kernel: [ 1412.874373] [<c10bcad9>] ?
user_path_at+0x37/0x5f
Oct 7 07:54:49 localhost kernel: [ 1412.874388] [<c10b6257>] ?
vfs_fstatat+0x2a/0x50
Oct 7 07:54:49 localhost kernel: [ 1412.874400] [<c10a53e9>] ?
free_pages_and_swap_cache+0x3b/0x48
Oct 7 07:54:49 localhost kernel: [ 1412.874411] [<c10b62be>] ?
vfs_lstat+0x13/0x15
Oct 7 07:54:49 localhost kernel: [ 1412.874422] [<c10b62cf>] ?
sys_lstat64+0xf/0x23
Oct 7 07:54:49 localhost kernel: [ 1412.874435] [<c109e9c7>] ?
remove_vma+0x43/0x48
Oct 7 07:54:49 localhost kernel: [ 1412.874446] [<c109f608>] ?
do_munmap+0x221/0x23b
Oct 7 07:54:49 localhost kernel: [ 1412.874456] [<c109f65b>] ?
sys_munmap+0x39/0x3e
Oct 7 07:54:49 localhost kernel: [ 1412.874470] [<c10030fb>] ?
sysenter_do_call+0x12/0x28
Oct 7 07:54:49 localhost kernel: [ 1412.874476] Code: ce 12 00 31 d2
89 d0 5b 5e c3 55 57 56 53 83 ec 04 89 04 24 8b 1c 24 64 a1 54 39 41
c1 8b 6c 24 18 8b 7b 14 03 3c 85 30 7d 3b c1 <8b> 07 89 c3 89 c6 c1 fe
1f 89 e8 01 d3 11 ce 99 39 d6 7f 15 7c
Oct 7 07:54:49 localhost kernel: [ 1412.874594] EIP: [<c1140c27>]
__percpu_counter_add+0x21/0x6d SS:ESP 0068:f6279cf4
Oct 7 07:54:49 localhost kernel: [ 1412.874609] CR2: 00000000015ef000
Oct 7 07:54:49 localhost kernel: [ 1412.874618] ---[ end trace
aad58f9263b7c46e ]---
Oct 7 07:55:01 localhost /USR/SBIN/CRON[3161]: (root) CMD (command -v
debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 7 07:58:43 localhost kernel: [ 1647.035866] BUG: unable to handle
kernel paging request at 015ef000
Oct 7 07:58:43 localhost kernel: [ 1647.035878] IP: [<c1140c27>]
__percpu_counter_add+0x21/0x6d
Oct 7 07:58:43 localhost kernel: [ 1647.035895] *pde = 00000000
Oct 7 07:58:43 localhost kernel: [ 1647.035901] Oops: 0000 [#2] SMP
Oct 7 07:58:43 localhost kernel: [ 1647.035908] last sysfs file:
/sys/devices/virtual/hwmon/hwmon0/temp1_input
Oct 7 07:58:43 localhost kernel: [ 1647.035914] Modules linked in:
usb_storage xt_multiport iptable_filter ip_tables x_tables
speedstep_lib cpufreq_stats cpufreq_userspace cpufreq_conservative
cpufreq_powersave fuse ext2 ext4 jbd2 crc16 loop snd_wavefront
snd_cs4236 snd_wss_lib snd_opl3_lib snd_hwdep radeon snd_mpu401
snd_mpu401_uart snd_seq_midi snd_seq_midi_event snd_intel8x0
snd_ac97_codec ac97_bus snd_rawmidi snd_pcm snd_seq snd_timer
snd_seq_device i2c_i801 psmouse ttm snd ns558 drm_kms_helper drm
i2c_algo_bit pcspkr gameport soundcore serio_raw evdev snd_page_alloc
i2c_core button shpchp processor rng_core pci_hotplug ext3 jbd mbcache
raid1 md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod cdrom
sd_mod crc_t10dif ata_generic fan 8139too ata_piix uhci_hcd sata_via
thermal 8139cp mii ehci_hcd libata scsi_mod usbcore nls_base
thermal_sys [last unloaded: scsi_wait_scan]
Oct 7 07:58:43 localhost kernel: [ 1647.036055]
Oct 7 07:58:43 localhost kernel: [ 1647.036063] Pid: 3218, comm:
umount Tainted: G D (2.6.32-5-686 #1)
Oct 7 07:58:43 localhost kernel: [ 1647.036069] EIP:
0060:[<c1140c27>] EFLAGS: 00210006 CPU: 1
Oct 7 07:58:43 localhost kernel: [ 1647.036076] EIP is at
__percpu_counter_add+0x21/0x6d
Oct 7 07:58:43 localhost kernel: [ 1647.036081] EAX: 00000001 EBX:
f658600c ECX: 00000000 EDX: 00000001
Oct 7 07:58:43 localhost kernel: [ 1647.036086] ESI: f6a55528 EDI:
015ef000 EBP: 00000010 ESP: f5919ed8
Oct 7 07:58:43 localhost kernel: [ 1647.036091] DS: 007b ES: 007b
FS: 00d8 GS: 00e0 SS: 0068
Oct 7 07:58:43 localhost kernel: [ 1647.036097] Process umount (pid:
3218, ti=f5918000 task=f6287740 task.ti=f5918000)
Oct 7 07:58:43 localhost kernel: [ 1647.036102] Stack:
Oct 7 07:58:43 localhost kernel: [ 1647.036105] f658600c f6287740
f6a55528 00000000 f7144400 c108d515 00000010 00000000
Oct 7 07:58:43 localhost kernel: [ 1647.036118] <0> c1bb3880 c10cded2
00000000 f5e80200 f5866a00 f8c5da83 00000001 028e56ed
Oct 7 07:58:43 localhost kernel: [ 1647.036132] <0> 00000000 f7144400
f63e4000 f5866a00 f5821e80 f8c606e4 f5919f2c f5866a00
Oct 7 07:58:43 localhost kernel: [ 1647.036147] Call Trace:
Oct 7 07:58:43 localhost kernel: [ 1647.036159] [<c108d515>] ?
account_page_dirtied+0x2f/0x4b
Oct 7 07:58:43 localhost kernel: [ 1647.036169] [<c10cded2>] ?
__set_page_dirty+0x44/0x82
Oct 7 07:58:43 localhost kernel: [ 1647.036198] [<f8c5da83>] ?
ext4_commit_super+0x114/0x160 [ext4]
Oct 7 07:58:43 localhost kernel: [ 1647.036217] [<f8c606e4>] ?
ext4_put_super+0xb8/0x292 [ext4]
Oct 7 07:58:43 localhost kernel: [ 1647.036227] [<c10b4e64>] ?
generic_shutdown_super+0x46/0xc6
Oct 7 07:58:43 localhost kernel: [ 1647.036235] [<c10b4efe>] ?
kill_block_super+0x1a/0x2c
Oct 7 07:58:43 localhost kernel: [ 1647.036244] [<c10e3732>] ?
vfs_quota_off+0x0/0xd
Oct 7 07:58:43 localhost kernel: [ 1647.036251] [<c10b549b>] ?
deactivate_super+0x4a/0x5f
Oct 7 07:58:43 localhost kernel: [ 1647.036260] [<c10c5487>] ?
sys_umount+0x2a5/0x2cb
Oct 7 07:58:43 localhost kernel: [ 1647.036268] [<c10c54b8>] ?
sys_oldumount+0xb/0xe
Oct 7 07:58:43 localhost kernel: [ 1647.036277] [<c10030fb>] ?
sysenter_do_call+0x12/0x28
Oct 7 07:58:43 localhost kernel: [ 1647.036281] Code: ce 12 00 31 d2
89 d0 5b 5e c3 55 57 56 53 83 ec 04 89 04 24 8b 1c 24 64 a1 54 39 41
c1 8b 6c 24 18 8b 7b 14 03 3c 85 30 7d 3b c1 <8b> 07 89 c3 89 c6 c1 fe
1f 89 e8 01 d3 11 ce 99 39 d6 7f 15 7c
Oct 7 07:58:43 localhost kernel: [ 1647.036356] EIP: [<c1140c27>]
__percpu_counter_add+0x21/0x6d SS:ESP 0068:f5919ed8
Oct 7 07:58:43 localhost kernel: [ 1647.036366] CR2: 00000000015ef000
Oct 7 07:58:43 localhost kernel: [ 1647.036372] ---[ end trace
aad58f9263b7c46f ]---
Oct 7 07:58:43 localhost kernel: [ 1647.036376] ------------[ cut
here ]------------
Oct 7 07:58:43 localhost kernel: [ 1647.036383] WARNING: at
/tmp/buildd/linux-2.6-2.6.32/debian/build/source_i386_none/kernel/exit.c:902
do_exit+0x30/0x5cd()
Oct 7 07:58:43 localhost kernel: [ 1647.036388] Hardware name:
Oct 7 07:58:43 localhost kernel: [ 1647.036391] Modules linked in:
usb_storage xt_multiport iptable_filter ip_tables x_tables
speedstep_lib cpufreq_stats cpufreq_userspace cpufreq_conservative
cpufreq_powersave fuse ext2 ext4 jbd2 crc16 loop snd_wavefront
snd_cs4236 snd_wss_lib snd_opl3_lib snd_hwdep radeon snd_mpu401
snd_mpu401_uart snd_seq_midi snd_seq_midi_event snd_intel8x0
snd_ac97_codec ac97_bus snd_rawmidi snd_pcm snd_seq snd_timer
snd_seq_device i2c_i801 psmouse ttm snd ns558 drm_kms_helper drm
i2c_algo_bit pcspkr gameport soundcore serio_raw evdev snd_page_alloc
i2c_core button shpchp processor rng_core pci_hotplug ext3 jbd mbcache
raid1 md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod cdrom
sd_mod crc_t10dif ata_generic fan 8139too ata_piix uhci_hcd sata_via
thermal 8139cp mii ehci_hcd libata scsi_mod usbcore nls_base
thermal_sys [last unloaded: scsi_wait_scan]
Oct 7 07:58:43 localhost kernel: [ 1647.036524] Pid: 3218, comm:
umount Tainted: G D 2.6.32-5-686 #1
Oct 7 07:58:43 localhost kernel: [ 1647.036528] Call Trace:
Oct 7 07:58:43 localhost kernel: [ 1647.036537] [<c1030725>] ?
warn_slowpath_common+0x5e/0x8a
Oct 7 07:58:43 localhost kernel: [ 1647.036544] [<c103075b>] ?
warn_slowpath_null+0xa/0xc
Oct 7 07:58:43 localhost kernel: [ 1647.036551] [<c1033344>] ?
do_exit+0x30/0x5cd
Oct 7 07:58:43 localhost kernel: [ 1647.036561] [<c126cba9>] ? printk+0xe/0x15
Oct 7 07:58:43 localhost kernel: [ 1647.036568] [<c126f100>] ?
oops_end+0x98/0x9d
Oct 7 07:58:43 localhost kernel: [ 1647.036577] [<c101b857>] ?
no_context+0x105/0x10e
Oct 7 07:58:43 localhost kernel: [ 1647.036584] [<c101b975>] ?
__bad_area_nosemaphore+0x115/0x11d
Oct 7 07:58:43 localhost kernel: [ 1647.036592] [<c108dccb>] ?
pagevec_lookup_tag+0x1b/0x22
Oct 7 07:58:43 localhost kernel: [ 1647.036601] [<c1088177>] ?
wait_on_page_writeback_range+0x9f/0xdf
Oct 7 07:58:43 localhost kernel: [ 1647.036608] [<c1001f10>] ?
__switch_to+0xcf/0x141
Oct 7 07:58:43 localhost kernel: [ 1647.036627] [<f8c6c724>] ?
ext4_discard_preallocations+0x6f/0x2a9 [ext4]
Oct 7 07:58:43 localhost kernel: [ 1647.036635] [<c1270156>] ?
do_page_fault+0x1bf/0x307
Oct 7 07:58:43 localhost kernel: [ 1647.036643] [<c101b9b6>] ?
bad_area+0x2d/0x32
Oct 7 07:58:43 localhost kernel: [ 1647.036650] [<c126ff97>] ?
do_page_fault+0x0/0x307
Oct 7 07:58:43 localhost kernel: [ 1647.036656] [<c126e7eb>] ?
error_code+0x73/0x78
Oct 7 07:58:43 localhost kernel: [ 1647.036664] [<c1140c27>] ?
__percpu_counter_add+0x21/0x6d
Oct 7 07:58:43 localhost kernel: [ 1647.036672] [<c108d515>] ?
account_page_dirtied+0x2f/0x4b
Oct 7 07:58:43 localhost kernel: [ 1647.036680] [<c10cded2>] ?
__set_page_dirty+0x44/0x82
Oct 7 07:58:43 localhost kernel: [ 1647.036699] [<f8c5da83>] ?
ext4_commit_super+0x114/0x160 [ext4]
Oct 7 07:58:43 localhost kernel: [ 1647.036716] [<f8c606e4>] ?
ext4_put_super+0xb8/0x292 [ext4]
Oct 7 07:58:43 localhost kernel: [ 1647.036725] [<c10b4e64>] ?
generic_shutdown_super+0x46/0xc6
Oct 7 07:58:43 localhost kernel: [ 1647.036733] [<c10b4efe>] ?
kill_block_super+0x1a/0x2c
Oct 7 07:58:43 localhost kernel: [ 1647.036740] [<c10e3732>] ?
vfs_quota_off+0x0/0xd
Oct 7 07:58:43 localhost kernel: [ 1647.036747] [<c10b549b>] ?
deactivate_super+0x4a/0x5f
Oct 7 07:58:43 localhost kernel: [ 1647.036755] [<c10c5487>] ?
sys_umount+0x2a5/0x2cb
Oct 7 07:58:43 localhost kernel: [ 1647.036762] [<c10c54b8>] ?
sys_oldumount+0xb/0xe
Oct 7 07:58:43 localhost kernel: [ 1647.036769] [<c10030fb>] ?
sysenter_do_call+0x12/0x28
Oct 7 07:58:43 localhost kernel: [ 1647.036775] ---[ end trace
aad58f9263b7c470 ]---
Oct 7 08:05:01 localhost /USR/SBIN/CRON[3301]: (root) CMD (command -v
debian-sa1 > /dev/null && debian-sa1 1 1)
Oct 7 08:07:43 localhost kernel: [ 2187.278796] usb 1-3: USB
disconnect, address 3
Oct 7 08:07:43 localhost kernel: [ 2187.532035] usb 1-3: new high
speed USB device using ehci_hcd and address 4
Oct 7 08:07:44 localhost kernel: [ 2187.668309] usb 1-3: New USB
device found, idVendor=1058, idProduct=0901
Oct 7 08:07:44 localhost kernel: [ 2187.668319] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 7 08:07:44 localhost kernel: [ 2187.668325] usb 1-3: Product: External HDD
Oct 7 08:07:44 localhost kernel: [ 2187.668330] usb 1-3:
Manufacturer: Western Digital
Oct 7 08:07:44 localhost kernel: [ 2187.668334] usb 1-3:
SerialNumber: 57442D5743414E4B43383633333636
Oct 7 08:07:44 localhost kernel: [ 2187.668549] usb 1-3:
configuration #1 chosen from 1 choice
Oct 7 08:07:44 localhost kernel: [ 2187.669188] scsi7 : SCSI
emulation for USB Mass Storage devices
Oct 7 08:07:44 localhost kernel: [ 2187.669660] usb-storage: device found at 4
Oct 7 08:07:44 localhost kernel: [ 2187.669672] usb-storage: waiting
for device to settle before scanning
Oct 7 08:07:47 localhost kernel: [ 2191.257231] usb 1-3: USB
disconnect, address 4
Oct 7 08:07:47 localhost kernel: [ 2191.528027] usb 1-3: new high
speed USB device using ehci_hcd and address 5
Oct 7 08:07:48 localhost kernel: [ 2191.664222] usb 1-3: New USB
device found, idVendor=1058, idProduct=0901
Oct 7 08:07:48 localhost kernel: [ 2191.664233] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 7 08:07:48 localhost kernel: [ 2191.664239] usb 1-3: Product: External HDD
Oct 7 08:07:48 localhost kernel: [ 2191.664244] usb 1-3:
Manufacturer: Western Digital
Oct 7 08:07:48 localhost kernel: [ 2191.664248] usb 1-3:
SerialNumber: 57442D5743414E4B43383633333636
Oct 7 08:07:48 localhost kernel: [ 2191.664459] usb 1-3:
configuration #1 chosen from 1 choice
Oct 7 08:07:48 localhost kernel: [ 2191.664948] scsi8 : SCSI
emulation for USB Mass Storage devices
Oct 7 08:07:48 localhost kernel: [ 2191.665405] usb-storage: device found at 5
Oct 7 08:07:48 localhost kernel: [ 2191.665412] usb-storage: waiting
for device to settle before scanning
Oct 7 08:07:53 localhost kernel: [ 2196.664268] usb-storage: device
scan complete
Oct 7 08:07:53 localhost kernel: [ 2196.699786] scsi 8:0:0:0:
Direct-Access WD 2500JB External 0108 PQ: 0 ANSI: 0
Oct 7 08:07:53 localhost kernel: [ 2196.701145] sd 8:0:0:0: Attached
scsi generic sg5 type 0
Oct 7 08:07:53 localhost kernel: [ 2196.714971] sd 8:0:0:0: [sde]
488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 7 08:07:53 localhost kernel: [ 2196.715969] sd 8:0:0:0: [sde]
Write Protect is off
Oct 7 08:07:53 localhost kernel: [ 2196.715984] sd 8:0:0:0: [sde]
Mode Sense: 03 00 00 00
Oct 7 08:07:53 localhost kernel: [ 2196.715992] sd 8:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 08:07:53 localhost kernel: [ 2196.718092] sd 8:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 08:07:53 localhost kernel: [ 2196.718108] sde: sde1 sde2 sde3 sde4
Oct 7 08:07:53 localhost kernel: [ 2196.721337] sd 8:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 08:07:53 localhost kernel: [ 2196.721352] sd 8:0:0:0: [sde]
Attached SCSI disk
Oct 7 08:09:09 localhost acpid: client 2810[0:0] has disconnected
Oct 7 08:09:09 localhost acpid: client connected from 1954[0:0]
Oct 7 08:09:09 localhost acpid: 1 client rule loaded
Oct 7 08:11:53 localhost acpid: client 1954[0:0] has disconnected
Oct 7 08:11:53 localhost acpid: client connected from 2810[0:0]
Oct 7 08:11:53 localhost acpid: 1 client rule loaded
Oct 7 08:12:46 localhost acpid: client 2810[0:0] has disconnected
Oct 7 08:12:46 localhost acpid: client connected from 3470[0:0]
Oct 7 08:12:46 localhost acpid: 1 client rule loaded
Oct 7 08:12:51 localhost acpid: client 3470[0:0] has disconnected
Oct 7 08:12:51 localhost acpid: client connected from 2810[0:0]
Oct 7 08:12:51 localhost acpid: 1 client rule loaded
Oct 7 08:13:47 localhost kernel: [ 2551.054439] usb 1-3: USB
disconnect, address 5
Oct 7 08:15:01 localhost /USR/SBIN/CRON[3525]: (root) CMD (command -v
debian-sa1 > /dev/null && debian-sa1 1 1)
*****************************************************************************
* LOG FILE CONTENTS: kern.log (session with bug symptoms) *
*****************************************************************************
Oct 7 07:31:33 localhost kernel: imklog 4.6.4, log source = /proc/kmsg started.
Oct 7 07:31:33 localhost kernel: [ 0.000000] Initializing cgroup
subsys cpuset
Oct 7 07:31:33 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 7 07:31:33 localhost kernel: [ 0.000000] Linux version
2.6.32-5-686 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5
(Debian 4.3.5-4) ) #1 SMP Mon Jun 13 04:13:06 UTC 2011
Oct 7 07:31:33 localhost kernel: [ 0.000000] KERNEL supported cpus:
Oct 7 07:31:33 localhost kernel: [ 0.000000] Intel GenuineIntel
Oct 7 07:31:33 localhost kernel: [ 0.000000] AMD AuthenticAMD
Oct 7 07:31:33 localhost kernel: [ 0.000000] NSC Geode by NSC
Oct 7 07:31:33 localhost kernel: [ 0.000000] Cyrix CyrixInstead
Oct 7 07:31:33 localhost kernel: [ 0.000000] Centaur CentaurHauls
Oct 7 07:31:33 localhost kernel: [ 0.000000] Transmeta GenuineTMx86
Oct 7 07:31:33 localhost kernel: [ 0.000000] Transmeta TransmetaCPU
Oct 7 07:31:33 localhost kernel: [ 0.000000] UMC UMC UMC UMC
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-provided physical RAM map:
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
0000000000000000 - 000000000009f000 (usable)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
000000000009f000 - 00000000000a0000 (reserved)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
00000000000f0000 - 0000000000100000 (reserved)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
0000000000100000 - 000000007fff0000 (usable)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
000000007fff0000 - 000000007fff3000 (ACPI NVS)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
000000007fff3000 - 0000000080000000 (ACPI data)
Oct 7 07:31:33 localhost kernel: [ 0.000000] BIOS-e820:
00000000fec00000 - 0000000100000000 (reserved)
Oct 7 07:31:33 localhost kernel: [ 0.000000] DMI 2.2 present.
Oct 7 07:31:33 localhost kernel: [ 0.000000] Phoenix BIOS
detected: BIOS may corrupt low RAM, working around it.
Oct 7 07:31:33 localhost kernel: [ 0.000000] e820 update range:
0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Oct 7 07:31:33 localhost kernel: [ 0.000000] last_pfn = 0x7fff0
max_arch_pfn = 0x100000
Oct 7 07:31:33 localhost kernel: [ 0.000000] MTRR default type: uncachable
Oct 7 07:31:33 localhost kernel: [ 0.000000] MTRR fixed ranges enabled:
Oct 7 07:31:33 localhost kernel: [ 0.000000] 00000-9FFFF write-back
Oct 7 07:31:33 localhost kernel: [ 0.000000] A0000-EFFFF uncachable
Oct 7 07:31:33 localhost kernel: [ 0.000000] F0000-FFFFF write-through
Oct 7 07:31:33 localhost kernel: [ 0.000000] MTRR variable ranges enabled:
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0 base 000000000
mask F80000000 write-back
Oct 7 07:31:33 localhost kernel: [ 0.000000] 1 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 2 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 3 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 4 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 5 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 6 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] 7 disabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] x86 PAT enabled: cpu
0, old 0x7040600070406, new 0x7010600070106
Oct 7 07:31:33 localhost kernel: [ 0.000000] initial memory mapped
: 0 - 01800000
Oct 7 07:31:33 localhost kernel: [ 0.000000] init_memory_mapping:
0000000000000000-00000000373fe000
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0000000000 -
0000400000 page 4k
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0000400000 -
0037000000 page 2M
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0037000000 -
00373fe000 page 4k
Oct 7 07:31:33 localhost kernel: [ 0.000000] kernel direct mapping
tables up to 373fe000 @ 10000-16000
Oct 7 07:31:33 localhost kernel: [ 0.000000] RAMDISK: 3772b000 - 37fefab0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Allocated new
RAMDISK: 00100000 - 009c4ab0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Move RAMDISK from
000000003772b000 - 0000000037fefaaf to 00100000 - 009c4aaf
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: RSDP 000f70d0
00014 (v00 IntelR)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: RSDT 7fff3000
0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: FACP 7fff3040
00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: DSDT 7fff30c0
042DC (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: FACS 7fff0000 00040
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: APIC 7fff73c0
00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: Local APIC
address 0xfee00000
Oct 7 07:31:33 localhost kernel: [ 0.000000] 1163MB HIGHMEM available.
Oct 7 07:31:33 localhost kernel: [ 0.000000] 883MB LOWMEM available.
Oct 7 07:31:33 localhost kernel: [ 0.000000] mapped low ram: 0 - 373fe000
Oct 7 07:31:33 localhost kernel: [ 0.000000] low ram: 0 - 373fe000
Oct 7 07:31:33 localhost kernel: [ 0.000000] node 0 low ram:
00000000 - 373fe000
Oct 7 07:31:33 localhost kernel: [ 0.000000] node 0 bootmap
00012000 - 00018e80
Oct 7 07:31:33 localhost kernel: [ 0.000000] (9 early
reservations) ==> bootmem [0000000000 - 00373fe000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #0 [0000000000 -
0000001000] BIOS data page ==> [0000000000 - 0000001000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #1 [0000001000 -
0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #2 [0000006000 -
0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #3 [0001000000 -
00014c8bb4] TEXT DATA BSS ==> [0001000000 - 00014c8bb4]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #4 [000009f000 -
0000100000] BIOS reserved ==> [000009f000 - 0000100000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #5 [00014c9000 -
00014cf06e] BRK ==> [00014c9000 - 00014cf06e]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #6 [0000010000 -
0000012000] PGTABLE ==> [0000010000 - 0000012000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #7 [0000100000 -
00009c4ab0] NEW RAMDISK ==> [0000100000 - 00009c4ab0]
Oct 7 07:31:33 localhost kernel: [ 0.000000] #8 [0000012000 -
0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Oct 7 07:31:33 localhost kernel: [ 0.000000] found SMP MP-table at
[c00f55d0] f55d0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Zone PFN ranges:
Oct 7 07:31:33 localhost kernel: [ 0.000000] DMA 0x00000010
-> 0x00001000
Oct 7 07:31:33 localhost kernel: [ 0.000000] Normal 0x00001000
-> 0x000373fe
Oct 7 07:31:33 localhost kernel: [ 0.000000] HighMem 0x000373fe
-> 0x0007fff0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Movable zone start
PFN for each node
Oct 7 07:31:33 localhost kernel: [ 0.000000] early_node_map[2]
active PFN ranges
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Oct 7 07:31:33 localhost kernel: [ 0.000000] 0: 0x00000100 -> 0x0007fff0
Oct 7 07:31:33 localhost kernel: [ 0.000000] On node 0 totalpages: 524159
Oct 7 07:31:33 localhost kernel: [ 0.000000] free_area_init_node:
node 0, pgdat c13b08a0, node_mem_map c14d1200
Oct 7 07:31:33 localhost kernel: [ 0.000000] DMA zone: 32 pages
used for memmap
Oct 7 07:31:33 localhost kernel: [ 0.000000] DMA zone: 0 pages reserved
Oct 7 07:31:33 localhost kernel: [ 0.000000] DMA zone: 3951
pages, LIFO batch:0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Normal zone: 1736
pages used for memmap
Oct 7 07:31:33 localhost kernel: [ 0.000000] Normal zone: 220470
pages, LIFO batch:31
Oct 7 07:31:33 localhost kernel: [ 0.000000] HighMem zone: 2328
pages used for memmap
Oct 7 07:31:33 localhost kernel: [ 0.000000] HighMem zone:
295642 pages, LIFO batch:31
Oct 7 07:31:33 localhost kernel: [ 0.000000] Using APIC driver default
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: Local APIC
address 0xfee00000
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x00] lapic_id[0x00] enabled)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: LAPIC
(acpi_id[0x01] lapic_id[0x01] enabled)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x00] high edge lint[0x1])
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x01] high edge lint[0x1])
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: IOAPIC
(id[0x02] address[0xfec00000] gsi_base[0])
Oct 7 07:31:33 localhost kernel: [ 0.000000] IOAPIC[0]: apic_id 2,
version 32, address 0xfec00000, GSI 0-23
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: INT_SRC_OVR
(bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: INT_SRC_OVR
(bus 0 bus_irq 9 global_irq 9 high level)
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: IRQ0 used by override.
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: IRQ2 used by override.
Oct 7 07:31:33 localhost kernel: [ 0.000000] ACPI: IRQ9 used by override.
Oct 7 07:31:33 localhost kernel: [ 0.000000] Using ACPI (MADT) for
SMP configuration information
Oct 7 07:31:33 localhost kernel: [ 0.000000] SMP: Allowing 2 CPUs,
0 hotplug CPUs
Oct 7 07:31:33 localhost kernel: [ 0.000000] nr_irqs_gsi: 24
Oct 7 07:31:33 localhost kernel: [ 0.000000] PM: Registered nosave
memory: 000000000009f000 - 00000000000a0000
Oct 7 07:31:33 localhost kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000a0000 - 00000000000f0000
Oct 7 07:31:33 localhost kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000f0000 - 0000000000100000
Oct 7 07:31:33 localhost kernel: [ 0.000000] Allocating PCI
resources starting at 80000000 (gap: 80000000:7ec00000)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Booting
paravirtualized kernel on bare hardware
Oct 7 07:31:33 localhost kernel: [ 0.000000] NR_CPUS:32
nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
Oct 7 07:31:33 localhost kernel: [ 0.000000] PERCPU: Embedded 14
pages/cpu @c2800000 s34328 r0 d23016 u2097152
Oct 7 07:31:33 localhost kernel: [ 0.000000] pcpu-alloc: s34328 r0
d23016 u2097152 alloc=1*4194304
Oct 7 07:31:33 localhost kernel: [ 0.000000] pcpu-alloc: [0] 0 1
Oct 7 07:31:33 localhost kernel: [ 0.000000] Built 1 zonelists in
Zone order, mobility grouping on. Total pages: 520063
Oct 7 07:31:33 localhost kernel: [ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=d6625e4a-53cf-46bd-99a3-b48f0da14ee2 ro quiet
Oct 7 07:31:33 localhost kernel: [ 0.000000] PID hash table
entries: 4096 (order: 2, 16384 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Dentry cache hash
table entries: 131072 (order: 7, 524288 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Inode-cache hash
table entries: 65536 (order: 6, 262144 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Enabling fast FPU
save and restore... done.
Oct 7 07:31:33 localhost kernel: [ 0.000000] Enabling unmasked
SIMD FPU exception support... done.
Oct 7 07:31:33 localhost kernel: [ 0.000000] Initializing CPU#0
Oct 7 07:31:33 localhost kernel: [ 0.000000] Initializing HighMem
for node 0 (000373fe:0007fff0)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Memory:
2064248k/2097088k available (2504k kernel code, 31268k reserved, 1313k
data, 380k init, 1191880k highmem)
Oct 7 07:31:33 localhost kernel: [ 0.000000] virtual kernel memory layout:
Oct 7 07:31:33 localhost kernel: [ 0.000000] fixmap :
0xffd56000 - 0xfffff000 (2724 kB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] pkmap :
0xff400000 - 0xff800000 (4096 kB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] vmalloc :
0xf7bfe000 - 0xff3fe000 ( 120 MB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] lowmem :
0xc0000000 - 0xf73fe000 ( 883 MB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] .init :
0xc13bb000 - 0xc141a000 ( 380 kB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] .data :
0xc1272001 - 0xc13ba4c0 (1313 kB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] .text :
0xc1000000 - 0xc1272001 (2504 kB)
Oct 7 07:31:33 localhost kernel: [ 0.000000] Checking if this
processor honours the WP bit even in supervisor mode...Ok.
Oct 7 07:31:33 localhost kernel: [ 0.000000] SLUB: Genslabs=13,
HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Oct 7 07:31:33 localhost kernel: [ 0.000000] Hierarchical RCU
implementation.
Oct 7 07:31:33 localhost kernel: [ 0.000000] NR_IRQS:1280
Oct 7 07:31:33 localhost kernel: [ 0.000000] Console: colour VGA+ 80x25
Oct 7 07:31:33 localhost kernel: [ 0.000000] console [tty0] enabled
Oct 7 07:31:33 localhost kernel: [ 0.000000] Fast TSC calibration using PIT
Oct 7 07:31:33 localhost kernel: [ 0.000000] Detected 1986.729 MHz
processor.
Oct 7 07:31:33 localhost kernel: [ 0.004008] Calibrating delay
loop (skipped), value calculated using timer frequency.. 3973.45
BogoMIPS (lpj=7946916)
Oct 7 07:31:33 localhost kernel: [ 0.004037] Security Framework initialized
Oct 7 07:31:33 localhost kernel: [ 0.004048] SELinux: Disabled at boot.
Oct 7 07:31:33 localhost kernel: [ 0.004061] Mount-cache hash
table entries: 512
Oct 7 07:31:33 localhost kernel: [ 0.004300] Initializing cgroup subsys ns
Oct 7 07:31:33 localhost kernel: [ 0.004309] Initializing cgroup
subsys cpuacct
Oct 7 07:31:33 localhost kernel: [ 0.004317] Initializing cgroup
subsys devices
Oct 7 07:31:33 localhost kernel: [ 0.004323] Initializing cgroup
subsys freezer
Oct 7 07:31:33 localhost kernel: [ 0.004327] Initializing cgroup
subsys net_cls
Oct 7 07:31:33 localhost kernel: [ 0.004377] CPU: Trace cache: 12K
uops, L1 D cache: 16K
Oct 7 07:31:33 localhost kernel: [ 0.004383] CPU: L2 cache: 1024K
Oct 7 07:31:33 localhost kernel: [ 0.004388] CPU: Physical Processor ID: 0
Oct 7 07:31:33 localhost kernel: [ 0.004391] CPU: Processor Core ID: 0
Oct 7 07:31:33 localhost kernel: [ 0.004397] mce: CPU supports 4 MCE banks
Oct 7 07:31:33 localhost kernel: [ 0.004417] CPU0: Thermal
monitoring enabled (TM1)
Oct 7 07:31:33 localhost kernel: [ 0.004425] using mwait in idle threads.
Oct 7 07:31:33 localhost kernel: [ 0.004441] Performance Events:
no PMU driver, software events only.
Oct 7 07:31:33 localhost kernel: [ 0.004453] Checking 'hlt'
instruction... OK.
Oct 7 07:31:33 localhost kernel: [ 0.022302] ACPI: Core revision 20090903
Oct 7 07:31:33 localhost kernel: [ 0.032109] Enabling APIC mode:
Flat. Using 1 I/O APICs
Oct 7 07:31:33 localhost kernel: [ 0.036165] ..TIMER: vector=0x30
apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 7 07:31:33 localhost kernel: [ 0.075857] CPU0: Intel(R)
Pentium(R) 4 CPU 3.00GHz stepping 04
Oct 7 07:31:33 localhost kernel: [ 0.076001] Booting processor 1
APIC 0x1 ip 0x6000
Oct 7 07:31:33 localhost kernel: [ 0.008000] Initializing CPU#1
Oct 7 07:31:33 localhost kernel: [ 0.008000] CPU: Trace cache: 12K
uops, L1 D cache: 16K
Oct 7 07:31:33 localhost kernel: [ 0.008000] CPU: L2 cache: 1024K
Oct 7 07:31:33 localhost kernel: [ 0.008000] CPU: Physical Processor ID: 0
Oct 7 07:31:33 localhost kernel: [ 0.008000] CPU: Processor Core ID: 0
Oct 7 07:31:33 localhost kernel: [ 0.008000] CPU1: Thermal
monitoring enabled (TM1)
Oct 7 07:31:33 localhost kernel: [ 0.160135] CPU1: Intel(R)
Pentium(R) 4 CPU 3.00GHz stepping 04
Oct 7 07:31:33 localhost kernel: [ 0.160152] checking TSC
synchronization [CPU#0 -> CPU#1]: passed.
Oct 7 07:31:33 localhost kernel: [ 0.164126] Brought up 2 CPUs
Oct 7 07:31:33 localhost kernel: [ 0.164134] Total of 2 processors
activated (7947.04 BogoMIPS).
Oct 7 07:31:33 localhost kernel: [ 0.165031] CPU0 attaching sched-domain:
Oct 7 07:31:33 localhost kernel: [ 0.165039] domain 0: span 0-1
level SIBLING
Oct 7 07:31:33 localhost kernel: [ 0.165045] groups: 0
(cpu_power = 589) 1 (cpu_power = 589)
Oct 7 07:31:33 localhost kernel: [ 0.165058] domain 1: span 0-1 level MC
Oct 7 07:31:33 localhost kernel: [ 0.165063] groups: 0-1
(cpu_power = 1178)
Oct 7 07:31:33 localhost kernel: [ 0.165072] CPU1 attaching sched-domain:
Oct 7 07:31:33 localhost kernel: [ 0.165076] domain 0: span 0-1
level SIBLING
Oct 7 07:31:33 localhost kernel: [ 0.165081] groups: 1
(cpu_power = 589) 0 (cpu_power = 589)
Oct 7 07:31:33 localhost kernel: [ 0.165091] domain 1: span 0-1 level MC
Oct 7 07:31:33 localhost kernel: [ 0.165096] groups: 0-1
(cpu_power = 1178)
Oct 7 07:31:33 localhost kernel: [ 0.165255] devtmpfs: initialized
Oct 7 07:31:33 localhost kernel: [ 0.165255] regulator: core version 0.5
Oct 7 07:31:33 localhost kernel: [ 0.165255] NET: Registered
protocol family 16
Oct 7 07:31:33 localhost kernel: [ 0.165255] ACPI: bus type pci registered
Oct 7 07:31:33 localhost kernel: [ 0.191382] PCI: PCI BIOS
revision 2.10 entry at 0xfbb60, last bus=2
Oct 7 07:31:33 localhost kernel: [ 0.191386] PCI: Using
configuration type 1 for base access
Oct 7 07:31:33 localhost kernel: [ 0.192059] bio: create slab <bio-0> at 0
Oct 7 07:31:33 localhost kernel: [ 0.192943] ACPI: EC: Look up EC in DSDT
Oct 7 07:31:33 localhost kernel: [ 0.202254] ACPI: Interpreter enabled
Oct 7 07:31:33 localhost kernel: [ 0.202261] ACPI: (supports S0 S1 S3 S4 S5)
Oct 7 07:31:33 localhost kernel: [ 0.202313] ACPI: Using IOAPIC
for interrupt routing
Oct 7 07:31:33 localhost kernel: [ 0.210261] ACPI: No dock devices found.
Oct 7 07:31:33 localhost kernel: [ 0.210428] ACPI: PCI Root Bridge
[PCI0] (0000:00)
Oct 7 07:31:33 localhost kernel: [ 0.210502] pci 0000:00:00.0:
Enabling MCH 'Overflow' Device
Oct 7 07:31:33 localhost kernel: [ 0.210518] pci 0000:00:00.0: reg
10 32bit mmio pref: [0xf0000000-0xf3ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.210659] pci 0000:00:06.0: reg
10 32bit mmio: [0xfecf0000-0xfecf0fff]
Oct 7 07:31:33 localhost kernel: [ 0.210784] pci 0000:00:1d.0: reg
20 io port: [0xe300-0xe31f]
Oct 7 07:31:33 localhost kernel: [ 0.210855] pci 0000:00:1d.1: reg
20 io port: [0xe000-0xe01f]
Oct 7 07:31:33 localhost kernel: [ 0.210925] pci 0000:00:1d.2: reg
20 io port: [0xe100-0xe11f]
Oct 7 07:31:33 localhost kernel: [ 0.210995] pci 0000:00:1d.3: reg
20 io port: [0xe200-0xe21f]
Oct 7 07:31:33 localhost kernel: [ 0.211065] pci 0000:00:1d.7: reg
10 32bit mmio: [0xf8000000-0xf80003ff]
Oct 7 07:31:33 localhost kernel: [ 0.211132] pci 0000:00:1d.7:
PME# supported from D0 D3hot D3cold
Oct 7 07:31:33 localhost kernel: [ 0.211140] pci 0000:00:1d.7: PME# disabled
Oct 7 07:31:33 localhost kernel: [ 0.211254] pci 0000:00:1f.0:
Force enabled HPET at 0xfed00000
Oct 7 07:31:33 localhost kernel: [ 0.211297] pci 0000:00:1f.1: reg
10 io port: [0x00-0x07]
Oct 7 07:31:33 localhost kernel: [ 0.211308] pci 0000:00:1f.1: reg
14 io port: [0x00-0x03]
Oct 7 07:31:33 localhost kernel: [ 0.211319] pci 0000:00:1f.1: reg
18 io port: [0x00-0x07]
Oct 7 07:31:33 localhost kernel: [ 0.211329] pci 0000:00:1f.1: reg
1c io port: [0x00-0x03]
Oct 7 07:31:33 localhost kernel: [ 0.211339] pci 0000:00:1f.1: reg
20 io port: [0xf000-0xf00f]
Oct 7 07:31:33 localhost kernel: [ 0.211350] pci 0000:00:1f.1: reg
24 32bit mmio: [0x000000-0x0003ff]
Oct 7 07:31:33 localhost kernel: [ 0.211419] pci 0000:00:1f.3: reg
20 io port: [0x500-0x51f]
Oct 7 07:31:33 localhost kernel: [ 0.211479] pci 0000:00:1f.5: reg
10 io port: [0xe500-0xe5ff]
Oct 7 07:31:33 localhost kernel: [ 0.211490] pci 0000:00:1f.5: reg
14 io port: [0xe600-0xe63f]
Oct 7 07:31:33 localhost kernel: [ 0.211500] pci 0000:00:1f.5: reg
18 32bit mmio: [0xf8001000-0xf80011ff]
Oct 7 07:31:33 localhost kernel: [ 0.211511] pci 0000:00:1f.5: reg
1c 32bit mmio: [0xf8002000-0xf80020ff]
Oct 7 07:31:33 localhost kernel: [ 0.211551] pci 0000:00:1f.5:
PME# supported from D0 D3hot D3cold
Oct 7 07:31:33 localhost kernel: [ 0.211558] pci 0000:00:1f.5: PME# disabled
Oct 7 07:31:33 localhost kernel: [ 0.211617] pci 0000:01:00.0: reg
10 32bit mmio pref: [0xe0000000-0xe7ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.211627] pci 0000:01:00.0: reg
14 io port: [0xc000-0xc0ff]
Oct 7 07:31:33 localhost kernel: [ 0.211636] pci 0000:01:00.0: reg
18 32bit mmio: [0xf5000000-0xf500ffff]
Oct 7 07:31:33 localhost kernel: [ 0.211660] pci 0000:01:00.0: reg
30 32bit mmio pref: [0x000000-0x01ffff]
Oct 7 07:31:33 localhost kernel: [ 0.211689] pci 0000:01:00.0:
supports D1 D2
Oct 7 07:31:33 localhost kernel: [ 0.211729] pci 0000:01:00.1: reg
10 32bit mmio pref: [0xe8000000-0xefffffff]
Oct 7 07:31:33 localhost kernel: [ 0.211739] pci 0000:01:00.1: reg
14 32bit mmio: [0xf5010000-0xf501ffff]
Oct 7 07:31:33 localhost kernel: [ 0.211783] pci 0000:01:00.1:
supports D1 D2
Oct 7 07:31:33 localhost kernel: [ 0.211852] pci 0000:00:01.0:
bridge io port: [0xc000-0xcfff]
Oct 7 07:31:33 localhost kernel: [ 0.211859] pci 0000:00:01.0:
bridge 32bit mmio: [0xf4000000-0xf5ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.211867] pci 0000:00:01.0:
bridge 32bit mmio pref: [0xe0000000-0xefffffff]
Oct 7 07:31:33 localhost kernel: [ 0.211921] pci 0000:02:01.0: reg
10 io port: [0xd000-0xd00f]
Oct 7 07:31:33 localhost kernel: [ 0.211932] pci 0000:02:01.0: reg
14 io port: [0xd100-0xd10f]
Oct 7 07:31:33 localhost kernel: [ 0.211942] pci 0000:02:01.0: reg
18 io port: [0xd200-0xd20f]
Oct 7 07:31:33 localhost kernel: [ 0.211953] pci 0000:02:01.0: reg
1c io port: [0xd300-0xd30f]
Oct 7 07:31:33 localhost kernel: [ 0.211963] pci 0000:02:01.0: reg
20 io port: [0xd400-0xd41f]
Oct 7 07:31:33 localhost kernel: [ 0.211973] pci 0000:02:01.0: reg
24 io port: [0xd500-0xd5ff]
Oct 7 07:31:33 localhost kernel: [ 0.211984] pci 0000:02:01.0: reg
30 32bit mmio pref: [0x000000-0x00ffff]
Oct 7 07:31:33 localhost kernel: [ 0.212074] pci 0000:02:05.0: reg
10 io port: [0xd600-0xd6ff]
Oct 7 07:31:33 localhost kernel: [ 0.212085] pci 0000:02:05.0: reg
14 32bit mmio: [0xf7000000-0xf70000ff]
Oct 7 07:31:33 localhost kernel: [ 0.212118] pci 0000:02:05.0: reg
30 32bit mmio pref: [0x000000-0x00ffff]
Oct 7 07:31:33 localhost kernel: [ 0.212143] pci 0000:02:05.0:
supports D1 D2
Oct 7 07:31:33 localhost kernel: [ 0.212147] pci 0000:02:05.0:
PME# supported from D1 D2 D3hot D3cold
Oct 7 07:31:33 localhost kernel: [ 0.212154] pci 0000:02:05.0: PME# disabled
Oct 7 07:31:33 localhost kernel: [ 0.212210] pci 0000:00:1e.0:
transparent bridge
Oct 7 07:31:33 localhost kernel: [ 0.212217] pci 0000:00:1e.0:
bridge io port: [0xd000-0xdfff]
Oct 7 07:31:33 localhost kernel: [ 0.212225] pci 0000:00:1e.0:
bridge 32bit mmio: [0xf6000000-0xf7ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.212247] pci_bus 0000:00: on NUMA node 0
Oct 7 07:31:33 localhost kernel: [ 0.212258] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0._PRT]
Oct 7 07:31:33 localhost kernel: [ 0.212427] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.HUB0._PRT]
Oct 7 07:31:33 localhost kernel: [ 0.228250] ACPI: PCI Interrupt
Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.228448] ACPI: PCI Interrupt
Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.228639] ACPI: PCI Interrupt
Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.228828] ACPI: PCI Interrupt
Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.229018] ACPI: PCI Interrupt
Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 7 07:31:33 localhost kernel: [ 0.229210] ACPI: PCI Interrupt
Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 7 07:31:33 localhost kernel: [ 0.229401] ACPI: PCI Interrupt
Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.229591] ACPI: PCI Interrupt
Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15)
Oct 7 07:31:33 localhost kernel: [ 0.229796] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Oct 7 07:31:33 localhost kernel: [ 0.229806] vgaarb: loaded
Oct 7 07:31:33 localhost kernel: [ 0.229843] PCI: Using ACPI for IRQ routing
Oct 7 07:31:33 localhost kernel: [ 0.229843] hpet clockevent registered
Oct 7 07:31:33 localhost kernel: [ 0.229843] HPET: 3 timers in
total, 0 timers will be used for per-cpu timer
Oct 7 07:31:33 localhost kernel: [ 0.229843] hpet0: at MMIO
0xfed00000, IRQs 2, 8, 0
Oct 7 07:31:33 localhost kernel: [ 0.229843] hpet0: 3 comparators,
64-bit 14.318180 MHz counter
Oct 7 07:31:33 localhost kernel: [ 0.236031] Switching to clocksource tsc
Oct 7 07:31:33 localhost kernel: [ 0.238480] pnp: PnP ACPI init
Oct 7 07:31:33 localhost kernel: [ 0.238508] ACPI: bus type pnp registered
Oct 7 07:31:33 localhost kernel: [ 0.243169] pnp: PnP ACPI: found 12 devices
Oct 7 07:31:33 localhost kernel: [ 0.243174] ACPI: ACPI bus type
pnp unregistered
Oct 7 07:31:33 localhost kernel: [ 0.243181] PnPBIOS: Disabled by ACPI PNP
Oct 7 07:31:33 localhost kernel: [ 0.243202] system 00:01: ioport
range 0xb78-0xb7b has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243208] system 00:01: ioport
range 0xf78-0xf7b has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243214] system 00:01: ioport
range 0xa78-0xa7b has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243220] system 00:01: ioport
range 0xe78-0xe7b has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243225] system 00:01: ioport
range 0xbbc-0xbbf has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243231] system 00:01: ioport
range 0xfbc-0xfbf has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243237] system 00:01: ioport
range 0x4d0-0x4d1 has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243242] system 00:01: ioport
range 0x294-0x297 has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243248] system 00:01: ioport
range 0x4e0-0x4e7 has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243264] system 00:0a: ioport
range 0x400-0x4bf has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243278] system 00:0b: iomem
range 0xd0c00-0xd3fff has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243284] system 00:0b: iomem
range 0xf0000-0xf7fff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243290] system 00:0b: iomem
range 0xf8000-0xfbfff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243296] system 00:0b: iomem
range 0xfc000-0xfffff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243302] system 00:0b: iomem
range 0x7fff0000-0x7fffffff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243308] system 00:0b: iomem
range 0x0-0x9ffff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243314] system 00:0b: iomem
range 0x100000-0x7ffeffff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243321] system 00:0b: iomem
range 0xfec00000-0xfec00fff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243327] system 00:0b: iomem
range 0xfec01000-0xfed8ffff could not be reserved
Oct 7 07:31:33 localhost kernel: [ 0.243333] system 00:0b: iomem
range 0xfee00000-0xfee00fff has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243339] system 00:0b: iomem
range 0xffb00000-0xffbfffff has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243345] system 00:0b: iomem
range 0xfff00000-0xffffffff has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.243351] system 00:0b: iomem
range 0xe0000-0xeffff has been reserved
Oct 7 07:31:33 localhost kernel: [ 0.278364] pci 0000:00:01.0: PCI
bridge, secondary bus 0000:01
Oct 7 07:31:33 localhost kernel: [ 0.278373] pci 0000:00:01.0:
IO window: 0xc000-0xcfff
Oct 7 07:31:33 localhost kernel: [ 0.278382] pci 0000:00:01.0:
MEM window: 0xf4000000-0xf5ffffff
Oct 7 07:31:33 localhost kernel: [ 0.278390] pci 0000:00:01.0:
PREFETCH window: 0xe0000000-0xefffffff
Oct 7 07:31:33 localhost kernel: [ 0.278403] pci 0000:00:1e.0: PCI
bridge, secondary bus 0000:02
Oct 7 07:31:33 localhost kernel: [ 0.278410] pci 0000:00:1e.0:
IO window: 0xd000-0xdfff
Oct 7 07:31:33 localhost kernel: [ 0.278418] pci 0000:00:1e.0:
MEM window: 0xf6000000-0xf7ffffff
Oct 7 07:31:33 localhost kernel: [ 0.278426] pci 0000:00:1e.0:
PREFETCH window: 0x80000000-0x800fffff
Oct 7 07:31:33 localhost kernel: [ 0.278452] pci 0000:00:1e.0:
setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 0.278462] pci_bus 0000:00:
resource 0 io: [0x00-0xffff]
Oct 7 07:31:33 localhost kernel: [ 0.278468] pci_bus 0000:00:
resource 1 mem: [0x000000-0xffffffff]
Oct 7 07:31:33 localhost kernel: [ 0.278473] pci_bus 0000:01:
resource 0 io: [0xc000-0xcfff]
Oct 7 07:31:33 localhost kernel: [ 0.278479] pci_bus 0000:01:
resource 1 mem: [0xf4000000-0xf5ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.278484] pci_bus 0000:01:
resource 2 pref mem [0xe0000000-0xefffffff]
Oct 7 07:31:33 localhost kernel: [ 0.278490] pci_bus 0000:02:
resource 0 io: [0xd000-0xdfff]
Oct 7 07:31:33 localhost kernel: [ 0.278495] pci_bus 0000:02:
resource 1 mem: [0xf6000000-0xf7ffffff]
Oct 7 07:31:33 localhost kernel: [ 0.278500] pci_bus 0000:02:
resource 2 pref mem [0x80000000-0x800fffff]
Oct 7 07:31:33 localhost kernel: [ 0.278506] pci_bus 0000:02:
resource 3 io: [0x00-0xffff]
Oct 7 07:31:33 localhost kernel: [ 0.278511] pci_bus 0000:02:
resource 4 mem: [0x000000-0xffffffff]
Oct 7 07:31:33 localhost kernel: [ 0.278573] NET: Registered
protocol family 2
Oct 7 07:31:33 localhost kernel: [ 0.278749] IP route cache hash
table entries: 32768 (order: 5, 131072 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.279431] TCP established hash
table entries: 131072 (order: 8, 1048576 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.280330] TCP bind hash table
entries: 65536 (order: 7, 524288 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.280889] TCP: Hash tables
configured (established 131072 bind 65536)
Oct 7 07:31:33 localhost kernel: [ 0.280893] TCP reno registered
Oct 7 07:31:33 localhost kernel: [ 0.281102] NET: Registered
protocol family 1
Oct 7 07:31:33 localhost kernel: [ 0.281259] pci 0000:01:00.0:
Boot video device
Oct 7 07:31:33 localhost kernel: [ 0.281383] Unpacking initramfs...
Oct 7 07:31:33 localhost kernel: [ 0.754503] Freeing initrd
memory: 8978k freed
Oct 7 07:31:33 localhost kernel: [ 0.766116] audit: initializing
netlink socket (disabled)
Oct 7 07:31:33 localhost kernel: [ 0.766141] type=2000
audit(1317972676.763:1): initialized
Oct 7 07:31:33 localhost kernel: [ 0.771640] highmem bounce pool
size: 64 pages
Oct 7 07:31:33 localhost kernel: [ 0.771650] HugeTLB registered 4
MB page size, pre-allocated 0 pages
Oct 7 07:31:33 localhost kernel: [ 0.774477] VFS: Disk quotas dquot_6.5.2
Oct 7 07:31:33 localhost kernel: [ 0.774594] Dquot-cache hash
table entries: 1024 (order 0, 4096 bytes)
Oct 7 07:31:33 localhost kernel: [ 0.774738] msgmni has been set to 1723
Oct 7 07:31:33 localhost kernel: [ 0.775160] alg: No test for stdrng (krng)
Oct 7 07:31:33 localhost kernel: [ 0.775270] Block layer SCSI
generic (bsg) driver version 0.4 loaded (major 253)
Oct 7 07:31:33 localhost kernel: [ 0.775276] io scheduler noop registered
Oct 7 07:31:33 localhost kernel: [ 0.775280] io scheduler
anticipatory registered
Oct 7 07:31:33 localhost kernel: [ 0.775284] io scheduler deadline
registered
Oct 7 07:31:33 localhost kernel: [ 0.775354] io scheduler cfq
registered (default)
Oct 7 07:31:33 localhost kernel: [ 0.775715] isapnp: Scanning for
PnP cards...
Oct 7 07:31:33 localhost kernel: [ 1.129868] isapnp: No Plug &
Play device found
Oct 7 07:31:33 localhost kernel: [ 1.132725] Linux agpgart interface v0.103
Oct 7 07:31:33 localhost kernel: [ 1.132878] agpgart-intel
0000:00:00.0: Intel 865 Chipset
Oct 7 07:31:33 localhost kernel: [ 1.137206] agpgart-intel
0000:00:00.0: AGP aperture is 64M @ 0xf0000000
Oct 7 07:31:33 localhost kernel: [ 1.137352] Serial: 8250/16550
driver, 4 ports, IRQ sharing enabled
Oct 7 07:31:33 localhost kernel: [ 1.138071] PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 7 07:31:33 localhost kernel: [ 1.140326] serio: i8042 KBD port
at 0x60,0x64 irq 1
Oct 7 07:31:33 localhost kernel: [ 1.140342] serio: i8042 AUX port
at 0x60,0x64 irq 12
Oct 7 07:31:33 localhost kernel: [ 1.140499] mice: PS/2 mouse
device common for all mice
Oct 7 07:31:33 localhost kernel: [ 1.140568] rtc_cmos 00:03: RTC
can wake from S4
Oct 7 07:31:33 localhost kernel: [ 1.140639] rtc_cmos 00:03: rtc
core: registered rtc_cmos as rtc0
Oct 7 07:31:33 localhost kernel: [ 1.140670] rtc0: alarms up to
one month, 242 bytes nvram, hpet irqs
Oct 7 07:31:33 localhost kernel: [ 1.140696] cpuidle: using governor ladder
Oct 7 07:31:33 localhost kernel: [ 1.140700] cpuidle: using governor menu
Oct 7 07:31:33 localhost kernel: [ 1.140709] No iBFT detected.
Oct 7 07:31:33 localhost kernel: [ 1.141426] TCP cubic registered
Oct 7 07:31:33 localhost kernel: [ 1.141653] NET: Registered
protocol family 10
Oct 7 07:31:33 localhost kernel: [ 1.143274] Mobile IPv6
Oct 7 07:31:33 localhost kernel: [ 1.143280] NET: Registered
protocol family 17
Oct 7 07:31:33 localhost kernel: [ 1.143307] Using IPI No-Shortcut mode
Oct 7 07:31:33 localhost kernel: [ 1.143436] PM: Resume from disk failed.
Oct 7 07:31:33 localhost kernel: [ 1.143460] registered taskstats version 1
Oct 7 07:31:33 localhost kernel: [ 1.143858] rtc_cmos 00:03:
setting system clock to 2011-10-07 07:31:17 UTC (1317972677)
Oct 7 07:31:33 localhost kernel: [ 1.143904] Initalizing network
drop monitor service
Oct 7 07:31:33 localhost kernel: [ 1.143945] Freeing unused kernel
memory: 380k freed
Oct 7 07:31:33 localhost kernel: [ 1.144411] Write protecting the
kernel text: 2508k
Oct 7 07:31:33 localhost kernel: [ 1.144450] Write protecting the
kernel read-only data: 904k
Oct 7 07:31:33 localhost kernel: [ 1.162285] input: AT Translated
Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Oct 7 07:31:33 localhost kernel: [ 1.182132] udev[56]: starting version 164
Oct 7 07:31:33 localhost kernel: [ 1.462075] usbcore: registered
new interface driver usbfs
Oct 7 07:31:33 localhost kernel: [ 1.462479] usbcore: registered
new interface driver hub
Oct 7 07:31:33 localhost kernel: [ 1.462870] usbcore: registered
new device driver usb
Oct 7 07:31:33 localhost kernel: [ 1.499001] SCSI subsystem initialized
Oct 7 07:31:33 localhost kernel: [ 1.562212] libata version 3.00 loaded.
Oct 7 07:31:33 localhost kernel: [ 1.564223] ehci_hcd: USB 2.0
'Enhanced' Host Controller (EHCI) Driver
Oct 7 07:31:33 localhost kernel: [ 1.564305] ehci_hcd
0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Oct 7 07:31:33 localhost kernel: [ 1.564339] ehci_hcd
0000:00:1d.7: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.564348] ehci_hcd
0000:00:1d.7: EHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.564396] ehci_hcd
0000:00:1d.7: new USB bus registered, assigned bus number 1
Oct 7 07:31:33 localhost kernel: [ 1.568340] ehci_hcd
0000:00:1d.7: cache line size of 128 is not supported
Oct 7 07:31:33 localhost kernel: [ 1.568374] ehci_hcd
0000:00:1d.7: irq 23, io mem 0xf8000000
Oct 7 07:31:33 localhost kernel: [ 1.572553] 8139cp: 10/100 PCI
Ethernet driver v1.3 (Mar 22, 2004)
Oct 7 07:31:33 localhost kernel: [ 1.572598] 8139cp 0000:02:05.0:
This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use
8139too
Oct 7 07:31:33 localhost kernel: [ 1.592549] ehci_hcd
0000:00:1d.7: USB 2.0 started, EHCI 1.00
Oct 7 07:31:33 localhost kernel: [ 1.592609] usb usb1: New USB
device found, idVendor=1d6b, idProduct=0002
Oct 7 07:31:33 localhost kernel: [ 1.592618] usb usb1: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Oct 7 07:31:33 localhost kernel: [ 1.592625] usb usb1: Product:
EHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.592632] usb usb1:
Manufacturer: Linux 2.6.32-5-686 ehci_hcd
Oct 7 07:31:33 localhost kernel: [ 1.592638] usb usb1:
SerialNumber: 0000:00:1d.7
Oct 7 07:31:33 localhost kernel: [ 1.592883] usb usb1:
configuration #1 chosen from 1 choice
Oct 7 07:31:33 localhost kernel: [ 1.592975] hub 1-0:1.0: USB hub found
Oct 7 07:31:33 localhost kernel: [ 1.592998] hub 1-0:1.0: 8 ports detected
Oct 7 07:31:33 localhost kernel: [ 1.603814] thermal LNXTHERM:01:
registered as thermal_zone0
Oct 7 07:31:33 localhost kernel: [ 1.603841] ACPI: Thermal Zone
[THRM] (43 C)
Oct 7 07:31:33 localhost kernel: [ 1.609528] sata_via
0000:02:01.0: version 2.4
Oct 7 07:31:33 localhost kernel: [ 1.609573] sata_via
0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 7 07:31:33 localhost kernel: [ 1.609676] sata_via
0000:02:01.0: routed to hard irq line 11
Oct 7 07:31:33 localhost kernel: [ 1.612829] scsi0 : sata_via
Oct 7 07:31:33 localhost kernel: [ 1.617320] scsi1 : sata_via
Oct 7 07:31:33 localhost kernel: [ 1.617663] scsi2 : sata_via
Oct 7 07:31:33 localhost kernel: [ 1.617785] ata1: SATA max
UDMA/133 port i16@0xd000 bmdma 0xd400 irq 18
Oct 7 07:31:33 localhost kernel: [ 1.617795] ata2: SATA max
UDMA/133 port i16@0xd100 bmdma 0xd408 irq 18
Oct 7 07:31:33 localhost kernel: [ 1.617802] ata3: PATA max
UDMA/133 port i16@0xd200 bmdma 0xd410 irq 18
Oct 7 07:31:33 localhost kernel: [ 1.618759] uhci_hcd: USB
Universal Host Controller Interface driver
Oct 7 07:31:33 localhost kernel: [ 1.618867] uhci_hcd
0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 7 07:31:33 localhost kernel: [ 1.618886] uhci_hcd
0000:00:1d.0: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.618895] uhci_hcd
0000:00:1d.0: UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.618923] uhci_hcd
0000:00:1d.0: new USB bus registered, assigned bus number 2
Oct 7 07:31:33 localhost kernel: [ 1.618977] uhci_hcd
0000:00:1d.0: irq 16, io base 0x0000e300
Oct 7 07:31:33 localhost kernel: [ 1.619068] usb usb2: New USB
device found, idVendor=1d6b, idProduct=0001
Oct 7 07:31:33 localhost kernel: [ 1.619076] usb usb2: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Oct 7 07:31:33 localhost kernel: [ 1.619083] usb usb2: Product:
UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.619089] usb usb2:
Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 7 07:31:33 localhost kernel: [ 1.619096] usb usb2:
SerialNumber: 0000:00:1d.0
Oct 7 07:31:33 localhost kernel: [ 1.619410] usb usb2:
configuration #1 chosen from 1 choice
Oct 7 07:31:33 localhost kernel: [ 1.619583] hub 2-0:1.0: USB hub found
Oct 7 07:31:33 localhost kernel: [ 1.619604] hub 2-0:1.0: 2 ports detected
Oct 7 07:31:33 localhost kernel: [ 1.619726] uhci_hcd
0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 7 07:31:33 localhost kernel: [ 1.619740] uhci_hcd
0000:00:1d.1: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.619748] uhci_hcd
0000:00:1d.1: UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.619770] uhci_hcd
0000:00:1d.1: new USB bus registered, assigned bus number 3
Oct 7 07:31:33 localhost kernel: [ 1.619817] uhci_hcd
0000:00:1d.1: irq 19, io base 0x0000e000
Oct 7 07:31:33 localhost kernel: [ 1.619895] usb usb3: New USB
device found, idVendor=1d6b, idProduct=0001
Oct 7 07:31:33 localhost kernel: [ 1.619904] usb usb3: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Oct 7 07:31:33 localhost kernel: [ 1.619910] usb usb3: Product:
UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.619916] usb usb3:
Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 7 07:31:33 localhost kernel: [ 1.619923] usb usb3:
SerialNumber: 0000:00:1d.1
Oct 7 07:31:33 localhost kernel: [ 1.620227] usb usb3:
configuration #1 chosen from 1 choice
Oct 7 07:31:33 localhost kernel: [ 1.620326] hub 3-0:1.0: USB hub found
Oct 7 07:31:33 localhost kernel: [ 1.620346] hub 3-0:1.0: 2 ports detected
Oct 7 07:31:33 localhost kernel: [ 1.620711] uhci_hcd
0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 7 07:31:33 localhost kernel: [ 1.620731] uhci_hcd
0000:00:1d.2: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.620741] uhci_hcd
0000:00:1d.2: UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.620768] uhci_hcd
0000:00:1d.2: new USB bus registered, assigned bus number 4
Oct 7 07:31:33 localhost kernel: [ 1.620809] uhci_hcd
0000:00:1d.2: irq 18, io base 0x0000e100
Oct 7 07:31:33 localhost kernel: [ 1.620898] usb usb4: New USB
device found, idVendor=1d6b, idProduct=0001
Oct 7 07:31:33 localhost kernel: [ 1.620907] usb usb4: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Oct 7 07:31:33 localhost kernel: [ 1.620916] usb usb4: Product:
UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.620923] usb usb4:
Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 7 07:31:33 localhost kernel: [ 1.620929] usb usb4:
SerialNumber: 0000:00:1d.2
Oct 7 07:31:33 localhost kernel: [ 1.621151] usb usb4:
configuration #1 chosen from 1 choice
Oct 7 07:31:33 localhost kernel: [ 1.621241] hub 4-0:1.0: USB hub found
Oct 7 07:31:33 localhost kernel: [ 1.621271] hub 4-0:1.0: 2 ports detected
Oct 7 07:31:33 localhost kernel: [ 1.621400] uhci_hcd
0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 7 07:31:33 localhost kernel: [ 1.621415] uhci_hcd
0000:00:1d.3: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.621423] uhci_hcd
0000:00:1d.3: UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.621444] uhci_hcd
0000:00:1d.3: new USB bus registered, assigned bus number 5
Oct 7 07:31:33 localhost kernel: [ 1.621480] uhci_hcd
0000:00:1d.3: irq 16, io base 0x0000e200
Oct 7 07:31:33 localhost kernel: [ 1.621555] usb usb5: New USB
device found, idVendor=1d6b, idProduct=0001
Oct 7 07:31:33 localhost kernel: [ 1.621564] usb usb5: New USB
device strings: Mfr=3, Product=2, SerialNumber=1
Oct 7 07:31:33 localhost kernel: [ 1.621571] usb usb5: Product:
UHCI Host Controller
Oct 7 07:31:33 localhost kernel: [ 1.621577] usb usb5:
Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 7 07:31:33 localhost kernel: [ 1.621583] usb usb5:
SerialNumber: 0000:00:1d.3
Oct 7 07:31:33 localhost kernel: [ 1.621752] usb usb5:
configuration #1 chosen from 1 choice
Oct 7 07:31:33 localhost kernel: [ 1.621836] hub 5-0:1.0: USB hub found
Oct 7 07:31:33 localhost kernel: [ 1.621855] hub 5-0:1.0: 2 ports detected
Oct 7 07:31:33 localhost kernel: [ 1.622758] ata_piix
0000:00:1f.1: version 2.13
Oct 7 07:31:33 localhost kernel: [ 1.622783] ata_piix
0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 7 07:31:33 localhost kernel: [ 1.622868] ata_piix
0000:00:1f.1: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 1.623020] scsi3 : ata_piix
Oct 7 07:31:33 localhost kernel: [ 1.623329] scsi4 : ata_piix
Oct 7 07:31:33 localhost kernel: [ 1.625508] ata4: PATA max
UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
Oct 7 07:31:33 localhost kernel: [ 1.625517] ata5: PATA max
UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Oct 7 07:31:33 localhost kernel: [ 1.629189] 8139too Fast Ethernet
driver 0.9.28
Oct 7 07:31:33 localhost kernel: [ 1.629295] 8139too 0000:02:05.0:
PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 7 07:31:33 localhost kernel: [ 1.632347] eth0: RealTek RTL8139
at 0xd600, 00:04:61:6e:b0:23, IRQ 22
Oct 7 07:31:33 localhost kernel: [ 1.647349] fan PNP0C0B:00:
registered as cooling_device0
Oct 7 07:31:33 localhost kernel: [ 1.647369] ACPI: Fan [FAN] (on)
Oct 7 07:31:33 localhost kernel: [ 1.788817] ata4.00: ATA-7:
Maxtor 6Y160P0, YAR41BW0, max UDMA/133
Oct 7 07:31:33 localhost kernel: [ 1.788826] ata4.00: 320173056
sectors, multi 16: LBA48
Oct 7 07:31:33 localhost kernel: [ 1.788896] ata4.01: ATAPI:
HL-DT-ST GCE-8520B, 1.02, max UDMA/33
Oct 7 07:31:33 localhost kernel: [ 1.804451] ata4.00: configured
for UDMA/100
Oct 7 07:31:33 localhost kernel: [ 1.812396] ata4.01: configured for UDMA/33
Oct 7 07:31:33 localhost kernel: [ 1.841292] ata5.00: ATA-7:
ST3320620A, 3.AAC, max UDMA/100
Oct 7 07:31:33 localhost kernel: [ 1.841300] ata5.00: 625142448
sectors, multi 16: LBA48
Oct 7 07:31:33 localhost kernel: [ 1.841370] ata5.01: ATAPI:
HL-DT-STDVD-ROM GDR8161B, 0100, max UDMA/33
Oct 7 07:31:33 localhost kernel: [ 1.916106] ata5.00: configured
for UDMA/100
Oct 7 07:31:33 localhost kernel: [ 1.932241] ata5.01: configured for UDMA/33
Oct 7 07:31:33 localhost kernel: [ 1.936057] ata1: SATA link up
1.5 Gbps (SStatus 113 SControl 310)
Oct 7 07:31:33 localhost kernel: [ 1.944510] ata1.00: ATA-7:
HTS721080G9SA00, MC4OC10H, max UDMA/100
Oct 7 07:31:33 localhost kernel: [ 1.944516] ata1.00: 156301488
sectors, multi 16: LBA48 NCQ (depth 0/32)
Oct 7 07:31:33 localhost kernel: [ 1.960555] ata1.00: configured
for UDMA/100
Oct 7 07:31:33 localhost kernel: [ 1.960771] scsi 0:0:0:0:
Direct-Access ATA HTS721080G9SA00 MC4O PQ: 0 ANSI: 5
Oct 7 07:31:33 localhost kernel: [ 2.290963] ata2: SATA link down
(SStatus 0 SControl 310)
Oct 7 07:31:33 localhost kernel: [ 2.455797] scsi 3:0:0:0:
Direct-Access ATA Maxtor 6Y160P0 YAR4 PQ: 0 ANSI: 5
Oct 7 07:31:33 localhost kernel: [ 2.456401] scsi 3:0:1:0: CD-ROM
HL-DT-ST CD-RW GCE-8520B 1.02 PQ: 0 ANSI: 5
Oct 7 07:31:33 localhost kernel: [ 2.456852] scsi 4:0:0:0:
Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5
Oct 7 07:31:33 localhost kernel: [ 2.469834] scsi 4:0:1:0: CD-ROM
HL-DT-ST DVD-ROM GDR8161B 0100 PQ: 0 ANSI: 5
Oct 7 07:31:33 localhost kernel: [ 2.502575] sd 0:0:0:0: [sda]
156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Oct 7 07:31:33 localhost kernel: [ 2.502743] sd 3:0:0:0: [sdb]
320173056 512-byte logical blocks: (163 GB/152 GiB)
Oct 7 07:31:33 localhost kernel: [ 2.502992] sd 4:0:0:0: [sdc]
625142448 512-byte logical blocks: (320 GB/298 GiB)
Oct 7 07:31:33 localhost kernel: [ 2.503009] sd 3:0:0:0: [sdb]
Write Protect is off
Oct 7 07:31:33 localhost kernel: [ 2.503020] sd 3:0:0:0: [sdb]
Mode Sense: 00 3a 00 00
Oct 7 07:31:33 localhost kernel: [ 2.503154] sd 0:0:0:0: [sda]
Write Protect is off
Oct 7 07:31:33 localhost kernel: [ 2.503164] sd 0:0:0:0: [sda]
Mode Sense: 00 3a 00 00
Oct 7 07:31:33 localhost kernel: [ 2.503202] sd 4:0:0:0: [sdc]
Write Protect is off
Oct 7 07:31:33 localhost kernel: [ 2.503212] sd 4:0:0:0: [sdc]
Mode Sense: 00 3a 00 00
Oct 7 07:31:33 localhost kernel: [ 2.503221] sd 3:0:0:0: [sdb]
Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 7 07:31:33 localhost kernel: [ 2.503301] sd 4:0:0:0: [sdc]
Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 7 07:31:33 localhost kernel: [ 2.503434] sd 0:0:0:0: [sda]
Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 7 07:31:33 localhost kernel: [ 2.503814] sdc:
Oct 7 07:31:33 localhost kernel: [ 2.504162] sdb:
Oct 7 07:31:33 localhost kernel: [ 2.504648] sda: sdc1 sdc2 sdc3
sdc4 < sdb1 sdb2 sdb3 sdb4 < sdc5 sdb5 sdc6 sdb6 sdc7 sdc8 sdb7 >
Oct 7 07:31:33 localhost kernel: [ 2.568371] sr0: scsi3-mmc drive:
40x/40x writer cd/rw xa/form2 cdda tray
Oct 7 07:31:33 localhost kernel: [ 2.568379] Uniform CD-ROM driver
Revision: 3.20
Oct 7 07:31:33 localhost kernel: [ 2.568609] sr 3:0:1:0: Attached
scsi CD-ROM sr0
Oct 7 07:31:33 localhost kernel: [ 2.577028] sdc9 sdc10 >
Oct 7 07:31:33 localhost kernel: [ 2.591195] sd 3:0:0:0: [sdb]
Attached SCSI disk
Oct 7 07:31:33 localhost kernel: [ 2.593037] sd 4:0:0:0: [sdc]
Attached SCSI disk
Oct 7 07:31:33 localhost kernel: [ 2.593083] sr1: scsi3-mmc drive:
20x/48x cd/rw xa/form2 cdda tray
Oct 7 07:31:33 localhost kernel: [ 2.593359] sr 4:0:1:0: Attached
scsi CD-ROM sr1
Oct 7 07:31:33 localhost kernel: [ 2.842218] sda1 sda2 sda3 sda4
Oct 7 07:31:33 localhost kernel: [ 2.843084] sd 0:0:0:0: [sda]
Attached SCSI disk
Oct 7 07:31:33 localhost kernel: [ 2.869793] sd 0:0:0:0: Attached
scsi generic sg0 type 0
Oct 7 07:31:33 localhost kernel: [ 2.871106] sd 3:0:0:0: Attached
scsi generic sg1 type 0
Oct 7 07:31:33 localhost kernel: [ 2.872523] sr 3:0:1:0: Attached
scsi generic sg2 type 5
Oct 7 07:31:33 localhost kernel: [ 2.874171] sd 4:0:0:0: Attached
scsi generic sg3 type 0
Oct 7 07:31:33 localhost kernel: [ 2.877171] sr 4:0:1:0: Attached
scsi generic sg4 type 5
Oct 7 07:31:33 localhost kernel: [ 3.357810] device-mapper:
uevent: version 1.0.3
Oct 7 07:31:33 localhost kernel: [ 3.358171] device-mapper: ioctl:
4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Oct 7 07:31:33 localhost kernel: [ 3.781871] md: raid1 personality
registered for level 1
Oct 7 07:31:33 localhost kernel: [ 3.899277] md: md0 stopped.
Oct 7 07:31:33 localhost kernel: [ 3.905068] md: bind<sdc3>
Oct 7 07:31:33 localhost kernel: [ 3.927389] md: bind<sdb3>
Oct 7 07:31:33 localhost kernel: [ 3.931875] raid1: raid set md0
active with 2 out of 2 mirrors
Oct 7 07:31:33 localhost kernel: [ 3.931940] md0: detected
capacity change from 0 to 22544369664
Oct 7 07:31:33 localhost kernel: [ 3.934092] md0: unknown partition table
Oct 7 07:31:33 localhost kernel: [ 4.155992] md: md1 stopped.
Oct 7 07:31:33 localhost kernel: [ 4.159757] md: bind<sdc5>
Oct 7 07:31:33 localhost kernel: [ 4.160165] md: bind<sdb6>
Oct 7 07:31:33 localhost kernel: [ 4.165131] raid1: raid set md1
active with 2 out of 2 mirrors
Oct 7 07:31:33 localhost kernel: [ 4.165224] md1: detected
capacity change from 0 to 103086279680
Oct 7 07:31:33 localhost kernel: [ 4.168117] md1: unknown partition table
Oct 7 07:31:33 localhost kernel: [ 4.377031] PM: Starting manual
resume from disk
Oct 7 07:31:33 localhost kernel: [ 4.377041] PM: Resume from partition 8:18
Oct 7 07:31:33 localhost kernel: [ 4.377045] PM: Checking hibernation image.
Oct 7 07:31:33 localhost kernel: [ 4.377330] PM: Error -22
checking image file
Oct 7 07:31:33 localhost kernel: [ 4.377334] PM: Resume from disk failed.
Oct 7 07:31:33 localhost kernel: [ 4.431482] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 4.431505] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 5.664439] udev[374]: starting version 164
Oct 7 07:31:33 localhost kernel: [ 6.024306] pci_hotplug: PCI Hot
Plug PCI Core version: 0.5
Oct 7 07:31:33 localhost kernel: [ 6.169280] processor LNXCPU:00:
registered as cooling_device1
Oct 7 07:31:33 localhost kernel: [ 6.169408] processor LNXCPU:01:
registered as cooling_device2
Oct 7 07:31:33 localhost kernel: [ 6.206206] intel_rng: FWH not detected
Oct 7 07:31:33 localhost kernel: [ 6.206860] input: Power Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
Oct 7 07:31:33 localhost kernel: [ 6.206882] ACPI: Power Button [PWRB]
Oct 7 07:31:33 localhost kernel: [ 6.207101] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Oct 7 07:31:33 localhost kernel: [ 6.207114] ACPI: Power Button [PWRF]
Oct 7 07:31:33 localhost kernel: [ 6.207307] shpchp: Standard Hot
Plug PCI Controller Driver version: 0.4
Oct 7 07:31:33 localhost kernel: [ 6.265999] input: PC Speaker as
/devices/platform/pcspkr/input/input3
Oct 7 07:31:33 localhost kernel: [ 6.813033] [drm] Initialized drm
1.1.0 20060810
Oct 7 07:31:33 localhost kernel: [ 6.869874] gameport: NS558 PnP
Gameport is pnp00:08/gameport0, io 0x200, speed 795kHz
Oct 7 07:31:33 localhost kernel: [ 7.281055] i801_smbus
0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 7 07:31:33 localhost kernel: [ 7.438113] Intel ICH
0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 7 07:31:33 localhost kernel: [ 7.438201] Intel ICH
0000:00:1f.5: setting latency timer to 64
Oct 7 07:31:33 localhost kernel: [ 7.716648] [drm] radeon kernel
modesetting enabled.
Oct 7 07:31:33 localhost kernel: [ 7.716771] radeon 0000:01:00.0:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 7 07:31:33 localhost kernel: [ 7.721074] [drm] radeon:
Initializing kernel modesetting.
Oct 7 07:31:33 localhost kernel: [ 7.721315] [drm] register mmio
base: 0xF5000000
Oct 7 07:31:33 localhost kernel: [ 7.721321] [drm] register mmio size: 65536
Oct 7 07:31:33 localhost kernel: [ 7.724666] [drm] GPU reset
succeed (RBBM_STATUS=0x00000140)
Oct 7 07:31:33 localhost kernel: [ 7.724714] [drm] Generation 2
PCI interface, using max accessible memory
Oct 7 07:31:33 localhost kernel: [ 7.724741] agpgart-intel
0000:00:00.0: AGP 3.0 bridge
Oct 7 07:31:33 localhost kernel: [ 7.724785] agpgart-intel
0000:00:00.0: putting AGP V3 device into 8x mode
Oct 7 07:31:33 localhost kernel: [ 7.724868] radeon 0000:01:00.0:
putting AGP V3 device into 8x mode
Oct 7 07:31:33 localhost kernel: [ 7.724922] [drm] radeon: VRAM 128M
Oct 7 07:31:33 localhost kernel: [ 7.724929] [drm] radeon: VRAM
from 0x00000000 to 0x07FFFFFF
Oct 7 07:31:33 localhost kernel: [ 7.724934] [drm] radeon: GTT 64M
Oct 7 07:31:33 localhost kernel: [ 7.724939] [drm] radeon: GTT
from 0xF0000000 to 0xF3FFFFFF
Oct 7 07:31:33 localhost kernel: [ 7.724981] [drm] radeon: irq initialized.
Oct 7 07:31:33 localhost kernel: [ 7.725605] [drm] Detected VRAM
RAM=128M, BAR=128M
Oct 7 07:31:33 localhost kernel: [ 7.725616] [drm] RAM width 64bits DDR
Oct 7 07:31:33 localhost kernel: [ 7.725808] [TTM] Zone kernel:
Available graphics memory: 441424 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.725816] [TTM] Zone highmem:
Available graphics memory: 1037364 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.725863] [drm] radeon: 128M of
VRAM memory ready
Oct 7 07:31:33 localhost kernel: [ 7.725871] [drm] radeon: 64M of
GTT memory ready.
Oct 7 07:31:33 localhost kernel: [ 7.726134] [drm] radeon: cp idle
(0x02000603)
Oct 7 07:31:33 localhost kernel: [ 7.726219] [drm] Loading R200 Microcode
Oct 7 07:31:33 localhost kernel: [ 7.726935] platform radeon_cp.0:
firmware: requesting radeon/R200_cp.bin
Oct 7 07:31:33 localhost kernel: [ 7.741316] input: ImExPS/2
Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
Oct 7 07:31:33 localhost kernel: [ 7.761029]
intel8x0_measure_ac97_clock: measured 54424 usecs (2623 samples)
Oct 7 07:31:33 localhost kernel: [ 7.761037] intel8x0: clocking to 48000
Oct 7 07:31:33 localhost kernel: [ 7.768623] radeon_cp: Failed to
load firmware "radeon/R200_cp.bin"
Oct 7 07:31:33 localhost kernel: [ 7.768695] [drm:r100_cp_init]
*ERROR* Failed to load firmware!
Oct 7 07:31:33 localhost kernel: [ 7.768764] radeon 0000:01:00.0:
failled initializing CP (-2).
Oct 7 07:31:33 localhost kernel: [ 7.768828] radeon 0000:01:00.0:
Disabling GPU acceleration
Oct 7 07:31:33 localhost kernel: [ 7.768886] [drm] radeon: cp finalized
Oct 7 07:31:33 localhost kernel: [ 7.769116] [drm] GPU reset
succeed (RBBM_STATUS=0x00000140)
Oct 7 07:31:33 localhost kernel: [ 7.769128] [drm] radeon: cp finalized
Oct 7 07:31:33 localhost kernel: [ 7.769256] [TTM] Zone kernel:
Used memory at exit: 0 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.769273] [TTM] Zone highmem:
Used memory at exit: 0 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.769284] [drm] radeon: ttm finalized
Oct 7 07:31:33 localhost kernel: [ 7.769293] [drm] Forcing AGP to PCI mode
Oct 7 07:31:33 localhost kernel: [ 7.773016] [drm] GPU reset
succeed (RBBM_STATUS=0x00000140)
Oct 7 07:31:33 localhost kernel: [ 7.773035] [drm] Generation 2
PCI interface, using max accessible memory
Oct 7 07:31:33 localhost kernel: [ 7.773043] [drm] radeon: VRAM 128M
Oct 7 07:31:33 localhost kernel: [ 7.773049] [drm] radeon: VRAM
from 0x00000000 to 0x07FFFFFF
Oct 7 07:31:33 localhost kernel: [ 7.773054] [drm] radeon: GTT 512M
Oct 7 07:31:33 localhost kernel: [ 7.773060] [drm] radeon: GTT
from 0x20000000 to 0x3FFFFFFF
Oct 7 07:31:33 localhost kernel: [ 7.773450] [drm] radeon: irq initialized.
Oct 7 07:31:33 localhost kernel: [ 7.773467] [drm] Detected VRAM
RAM=128M, BAR=128M
Oct 7 07:31:33 localhost kernel: [ 7.773474] [drm] RAM width 64bits DDR
Oct 7 07:31:33 localhost kernel: [ 7.775666] [TTM] Zone kernel:
Available graphics memory: 441424 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.775674] [TTM] Zone highmem:
Available graphics memory: 1037364 kiB.
Oct 7 07:31:33 localhost kernel: [ 7.775711] [drm] radeon: 128M of
VRAM memory ready
Oct 7 07:31:33 localhost kernel: [ 7.775718] [drm] radeon: 512M of
GTT memory ready.
Oct 7 07:31:33 localhost kernel: [ 7.775726] [drm] GART: num cpu
pages 131072, num gpu pages 131072
Oct 7 07:31:33 localhost kernel: [ 7.778310] [drm] radeon: cp idle
(0x02000603)
Oct 7 07:31:33 localhost kernel: [ 7.778398] [drm] Loading R200 Microcode
Oct 7 07:31:33 localhost kernel: [ 7.778407] platform radeon_cp.0:
firmware: requesting radeon/R200_cp.bin
Oct 7 07:31:33 localhost kernel: [ 7.804563] radeon_cp: Failed to
load firmware "radeon/R200_cp.bin"
Oct 7 07:31:33 localhost kernel: [ 7.804646] [drm:r100_cp_init]
*ERROR* Failed to load firmware!
Oct 7 07:31:33 localhost kernel: [ 7.804718] radeon 0000:01:00.0:
failled initializing CP (-2).
Oct 7 07:31:33 localhost kernel: [ 7.804781] radeon 0000:01:00.0:
Disabling GPU acceleration
Oct 7 07:31:33 localhost kernel: [ 7.804842] [drm] radeon: cp finalized
Oct 7 07:31:33 localhost kernel: [ 7.806341] [drm] Default TV standard: PAL
Oct 7 07:31:33 localhost kernel: [ 7.806348] [drm] 27.000000000
MHz TV ref clk
Oct 7 07:31:33 localhost kernel: [ 7.806356] [drm] Default TV standard: PAL
Oct 7 07:31:33 localhost kernel: [ 7.806360] [drm] 27.000000000
MHz TV ref clk
Oct 7 07:31:33 localhost kernel: [ 7.806460] [drm] Radeon Display Connectors
Oct 7 07:31:33 localhost kernel: [ 7.806466] [drm] Connector 0:
Oct 7 07:31:33 localhost kernel: [ 7.806470] [drm] VGA
Oct 7 07:31:33 localhost kernel: [ 7.806478] [drm] DDC: 0x60
0x60 0x60 0x60 0x60 0x60 0x60 0x60
Oct 7 07:31:33 localhost kernel: [ 7.806485] [drm] Encoders:
Oct 7 07:31:33 localhost kernel: [ 7.806490] [drm] CRT1: INTERNAL_DAC1
Oct 7 07:31:33 localhost kernel: [ 7.806495] [drm] Connector 1:
Oct 7 07:31:33 localhost kernel: [ 7.806499] [drm] S-video
Oct 7 07:31:33 localhost kernel: [ 7.806503] [drm] Encoders:
Oct 7 07:31:33 localhost kernel: [ 7.806508] [drm] TV1: INTERNAL_DAC2
Oct 7 07:31:33 localhost kernel: [ 7.965173] [drm] fb mappable at 0xE0040000
Oct 7 07:31:33 localhost kernel: [ 7.965179] [drm] vram apper at 0xE0000000
Oct 7 07:31:33 localhost kernel: [ 7.965182] [drm] size 3145728
Oct 7 07:31:33 localhost kernel: [ 7.965186] [drm] fb depth is 24
Oct 7 07:31:33 localhost kernel: [ 7.965190] [drm] pitch is 4096
Oct 7 07:31:33 localhost kernel: [ 8.045075] Console: switching to
colour frame buffer device 128x48
Oct 7 07:31:33 localhost kernel: [ 8.072282] fb0: radeondrmfb
frame buffer device
Oct 7 07:31:33 localhost kernel: [ 8.072290] registered panic notifier
Oct 7 07:31:33 localhost kernel: [ 8.076166] [drm] Initialized
radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
Oct 7 07:31:33 localhost kernel: [ 8.850542] Adding 1052248k swap
on /dev/sdb2. Priority:-1 extents:1 across:1052248k
Oct 7 07:31:33 localhost kernel: [ 10.158906] EXT3 FS on md0,
internal journal
Oct 7 07:31:33 localhost kernel: [ 10.284475] loop: module loaded
Oct 7 07:31:33 localhost kernel: [ 14.007785] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 14.007990] EXT3 FS on sda1,
internal journal
Oct 7 07:31:33 localhost kernel: [ 14.008001] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 14.306731] EXT4-fs (md1):
mounted filesystem with ordered data mode
Oct 7 07:31:33 localhost kernel: [ 14.371752] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 14.371918] EXT3 FS on sdc7,
internal journal
Oct 7 07:31:33 localhost kernel: [ 14.371929] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 14.484779] EXT4-fs (sda3):
mounted filesystem with ordered data mode
Oct 7 07:31:33 localhost kernel: [ 14.665334] EXT4-fs (sdc8):
mounted filesystem with ordered data mode
Oct 7 07:31:33 localhost kernel: [ 14.704427] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 14.704775] EXT3 FS on sdb7,
internal journal
Oct 7 07:31:33 localhost kernel: [ 14.704785] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 14.794203] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 14.794376] EXT3 FS on sdc9,
internal journal
Oct 7 07:31:33 localhost kernel: [ 14.794386] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 14.881949] kjournald starting.
Commit interval 5 seconds
Oct 7 07:31:33 localhost kernel: [ 14.882271] EXT3 FS on sda2,
internal journal
Oct 7 07:31:33 localhost kernel: [ 14.882281] EXT3-fs: mounted
filesystem with ordered data mode.
Oct 7 07:31:33 localhost kernel: [ 15.975485] fuse init (API version 7.13)
Oct 7 07:31:33 localhost kernel: [ 16.450975] eth0: link up,
100Mbps, full-duplex, lpa 0x45E1
Oct 7 07:31:36 localhost kernel: [ 19.932080] ip_tables: (C)
2000-2006 Netfilter Core Team
Oct 7 07:31:42 localhost kernel: [ 26.564020] eth0: no IPv6 routers present
Oct 7 07:45:13 localhost kernel: [ 837.252028] usb 1-3: new high
speed USB device using ehci_hcd and address 2
Oct 7 07:45:13 localhost kernel: [ 837.388323] usb 1-3: New USB
device found, idVendor=1058, idProduct=0901
Oct 7 07:45:13 localhost kernel: [ 837.388331] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 7 07:45:13 localhost kernel: [ 837.388337] usb 1-3: Product: External HDD
Oct 7 07:45:13 localhost kernel: [ 837.388341] usb 1-3:
Manufacturer: Western Digital
Oct 7 07:45:13 localhost kernel: [ 837.388345] usb 1-3:
SerialNumber: 57442D5743414E4B43383633333636
Oct 7 07:45:13 localhost kernel: [ 837.388545] usb 1-3:
configuration #1 chosen from 1 choice
Oct 7 07:45:13 localhost kernel: [ 837.465606] Initializing USB Mass
Storage driver...
Oct 7 07:45:13 localhost kernel: [ 837.466078] scsi5 : SCSI
emulation for USB Mass Storage devices
Oct 7 07:45:13 localhost kernel: [ 837.466472] usbcore: registered
new interface driver usb-storage
Oct 7 07:45:13 localhost kernel: [ 837.466483] USB Mass Storage
support registered.
Oct 7 07:45:13 localhost kernel: [ 837.467296] usb-storage: device found at 2
Oct 7 07:45:13 localhost kernel: [ 837.467302] usb-storage: waiting
for device to settle before scanning
Oct 7 07:45:18 localhost kernel: [ 842.464346] usb-storage: device
scan complete
Oct 7 07:45:18 localhost kernel: [ 842.499677] scsi 5:0:0:0:
Direct-Access WD 2500JB External 0108 PQ: 0 ANSI: 0
Oct 7 07:45:18 localhost kernel: [ 842.500770] sd 5:0:0:0: Attached
scsi generic sg5 type 0
Oct 7 07:45:18 localhost kernel: [ 842.502554] sd 5:0:0:0: [sdd]
488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 7 07:45:18 localhost kernel: [ 842.503407] sd 5:0:0:0: [sdd]
Write Protect is off
Oct 7 07:45:18 localhost kernel: [ 842.503419] sd 5:0:0:0: [sdd]
Mode Sense: 03 00 00 00
Oct 7 07:45:18 localhost kernel: [ 842.503427] sd 5:0:0:0: [sdd]
Assuming drive cache: write through
Oct 7 07:45:18 localhost kernel: [ 842.510082] sd 5:0:0:0: [sdd]
Assuming drive cache: write through
Oct 7 07:45:18 localhost kernel: [ 842.510099] sdd: sdd1 sdd2 sdd3 sdd4
Oct 7 07:45:18 localhost kernel: [ 842.517314] sd 5:0:0:0: [sdd]
Assuming drive cache: write through
Oct 7 07:45:18 localhost kernel: [ 842.517332] sd 5:0:0:0: [sdd]
Attached SCSI disk
Oct 7 07:49:36 localhost kernel: [ 1099.881872] EXT4-fs (sdd1):
mounted filesystem with ordered data mode
Oct 7 07:49:37 localhost kernel: [ 1101.497717] EXT4-fs (sdd2):
recovery complete
Oct 7 07:49:37 localhost kernel: [ 1101.497728] EXT4-fs (sdd2):
mounted filesystem with ordered data mode
Oct 7 07:54:43 localhost kernel: [ 1406.865500] usb 1-3: USB
disconnect, address 2
Oct 7 07:54:43 localhost kernel: [ 1407.144039] usb 1-3: new high
speed USB device using ehci_hcd and address 3
Oct 7 07:54:43 localhost kernel: [ 1407.280124] usb 1-3: New USB
device found, idVendor=1058, idProduct=0901
Oct 7 07:54:43 localhost kernel: [ 1407.280132] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 7 07:54:43 localhost kernel: [ 1407.280138] usb 1-3: Product: External HDD
Oct 7 07:54:43 localhost kernel: [ 1407.280142] usb 1-3:
Manufacturer: Western Digital
Oct 7 07:54:43 localhost kernel: [ 1407.280147] usb 1-3:
SerialNumber: 57442D5743414E4B43383633333636
Oct 7 07:54:43 localhost kernel: [ 1407.280351] usb 1-3:
configuration #1 chosen from 1 choice
Oct 7 07:54:43 localhost kernel: [ 1407.281417] scsi6 : SCSI
emulation for USB Mass Storage devices
Oct 7 07:54:43 localhost kernel: [ 1407.281875] usb-storage: device found at 3
Oct 7 07:54:43 localhost kernel: [ 1407.281883] usb-storage: waiting
for device to settle before scanning
Oct 7 07:54:48 localhost kernel: [ 1412.281305] usb-storage: device
scan complete
Oct 7 07:54:48 localhost kernel: [ 1412.316637] scsi 6:0:0:0:
Direct-Access WD 2500JB External 0108 PQ: 0 ANSI: 0
Oct 7 07:54:48 localhost kernel: [ 1412.318026] sd 6:0:0:0: Attached
scsi generic sg5 type 0
Oct 7 07:54:48 localhost kernel: [ 1412.319910] sd 6:0:0:0: [sde]
488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 7 07:54:48 localhost kernel: [ 1412.320739] sd 6:0:0:0: [sde]
Write Protect is off
Oct 7 07:54:48 localhost kernel: [ 1412.320754] sd 6:0:0:0: [sde]
Mode Sense: 03 00 00 00
Oct 7 07:54:48 localhost kernel: [ 1412.320761] sd 6:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 07:54:48 localhost kernel: [ 1412.322852] sd 6:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 07:54:48 localhost kernel: [ 1412.322866] sde: sde1 sde2 sde3 sde4
Oct 7 07:54:48 localhost kernel: [ 1412.339497] sd 6:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 07:54:48 localhost kernel: [ 1412.339510] sd 6:0:0:0: [sde]
Attached SCSI disk
Oct 7 07:54:49 localhost kernel: [ 1412.873626] EXT4-fs error (device
sdd2): ext4_find_entry: reading directory #2 offset 0
Oct 7 07:54:49 localhost kernel: [ 1412.873695] BUG: unable to handle
kernel paging request at 015ef000
Oct 7 07:54:49 localhost kernel: [ 1412.873706] IP: [<c1140c27>]
__percpu_counter_add+0x21/0x6d
Oct 7 07:54:49 localhost kernel: [ 1412.873727] *pde = 00000000
Oct 7 07:54:49 localhost kernel: [ 1412.873735] Oops: 0000 [#1] SMP
Oct 7 07:54:49 localhost kernel: [ 1412.873745] last sysfs file:
/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/host6/target6:0:0/6:0:0:0/block/sde/size
Oct 7 07:54:49 localhost kernel: [ 1412.873756] Modules linked in:
usb_storage xt_multiport iptable_filter ip_tables x_tables
speedstep_lib cpufreq_stats cpufreq_userspace cpufreq_conservative
cpufreq_powersave fuse ext2 ext4 jbd2 crc16 loop snd_wavefront
snd_cs4236 snd_wss_lib snd_opl3_lib snd_hwdep radeon snd_mpu401
snd_mpu401_uart snd_seq_midi snd_seq_midi_event snd_intel8x0
snd_ac97_codec ac97_bus snd_rawmidi snd_pcm snd_seq snd_timer
snd_seq_device i2c_i801 psmouse ttm snd ns558 drm_kms_helper drm
i2c_algo_bit pcspkr gameport soundcore serio_raw evdev snd_page_alloc
i2c_core button shpchp processor rng_core pci_hotplug ext3 jbd mbcache
raid1 md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod cdrom
sd_mod crc_t10dif ata_generic fan 8139too ata_piix uhci_hcd sata_via
thermal 8139cp mii ehci_hcd libata scsi_mod usbcore nls_base
thermal_sys [last unloaded: scsi_wait_scan]
Oct 7 07:54:49 localhost kernel: [ 1412.873949]
Oct 7 07:54:49 localhost kernel: [ 1412.873959] Pid: 2489, comm:
xfdesktop Not tainted (2.6.32-5-686 #1)
Oct 7 07:54:49 localhost kernel: [ 1412.873969] EIP:
0060:[<c1140c27>] EFLAGS: 00010006 CPU: 1
Oct 7 07:54:49 localhost kernel: [ 1412.873979] EIP is at
__percpu_counter_add+0x21/0x6d
Oct 7 07:54:49 localhost kernel: [ 1412.873987] EAX: 00000001 EBX:
f658600c ECX: 00000000 EDX: 00000001
Oct 7 07:54:49 localhost kernel: [ 1412.873994] ESI: f6a55728 EDI:
015ef000 EBP: 00000010 ESP: f6279cf4
Oct 7 07:54:49 localhost kernel: [ 1412.874001] DS: 007b ES: 007b
FS: 00d8 GS: 00e0 SS: 0068
Oct 7 07:54:49 localhost kernel: [ 1412.874010] Process xfdesktop
(pid: 2489, ti=f6278000 task=f6cf7b80 task.ti=f6278000)
Oct 7 07:54:49 localhost kernel: [ 1412.874016] Stack:
Oct 7 07:54:49 localhost kernel: [ 1412.874021] f658600c f6cf7b80
f6a55728 00000000 f71af400 c108d515 00000010 00000000
Oct 7 07:54:49 localhost kernel: [ 1412.874039] <0> c1bb45e0 c10cded2
00000000 f5e85d40 f5867200 f8c5da83 00000001 033d4acb
Oct 7 07:54:49 localhost kernel: [ 1412.874059] <0> 00000000 f5867200
f5867200 00000000 00000001 f8c60077 f6279d84 f8c601c8
Oct 7 07:54:49 localhost kernel: [ 1412.874081] Call Trace:
Oct 7 07:54:49 localhost kernel: [ 1412.874099] [<c108d515>] ?
account_page_dirtied+0x2f/0x4b
Oct 7 07:54:49 localhost kernel: [ 1412.874114] [<c10cded2>] ?
__set_page_dirty+0x44/0x82
Oct 7 07:54:49 localhost kernel: [ 1412.874156] [<f8c5da83>] ?
ext4_commit_super+0x114/0x160 [ext4]
Oct 7 07:54:49 localhost kernel: [ 1412.874188] [<f8c60077>] ?
ext4_handle_error+0x6f/0x8e [ext4]
Oct 7 07:54:49 localhost kernel: [ 1412.874219] [<f8c601c8>] ?
ext4_error+0x3a/0x40 [ext4]
Oct 7 07:54:49 localhost kernel: [ 1412.874250] [<f8c522a8>] ?
ext4_find_entry+0x3a9/0x517 [ext4]
Oct 7 07:54:49 localhost kernel: [ 1412.874269] [<c108c109>] ?
__alloc_pages_nodemask+0xf3/0x4d9
Oct 7 07:54:49 localhost kernel: [ 1412.874286] [<c10c1064>] ?
d_alloc+0x1b/0x154
Oct 7 07:54:49 localhost kernel: [ 1412.874316] [<f8c52cfb>] ?
ext4_lookup+0x24/0xae [ext4]
Oct 7 07:54:49 localhost kernel: [ 1412.874328] [<c10b9ca9>] ?
do_lookup+0xa6/0x116
Oct 7 07:54:49 localhost kernel: [ 1412.874339] [<c10ba518>] ?
__link_path_walk+0x4b7/0x5de
Oct 7 07:54:49 localhost kernel: [ 1412.874350] [<c10ba7f5>] ?
path_walk+0x4f/0xa3
Oct 7 07:54:49 localhost kernel: [ 1412.874362] [<c10bb971>] ?
do_path_lookup+0x1f/0x69
Oct 7 07:54:49 localhost kernel: [ 1412.874373] [<c10bcad9>] ?
user_path_at+0x37/0x5f
Oct 7 07:54:49 localhost kernel: [ 1412.874388] [<c10b6257>] ?
vfs_fstatat+0x2a/0x50
Oct 7 07:54:49 localhost kernel: [ 1412.874400] [<c10a53e9>] ?
free_pages_and_swap_cache+0x3b/0x48
Oct 7 07:54:49 localhost kernel: [ 1412.874411] [<c10b62be>] ?
vfs_lstat+0x13/0x15
Oct 7 07:54:49 localhost kernel: [ 1412.874422] [<c10b62cf>] ?
sys_lstat64+0xf/0x23
Oct 7 07:54:49 localhost kernel: [ 1412.874435] [<c109e9c7>] ?
remove_vma+0x43/0x48
Oct 7 07:54:49 localhost kernel: [ 1412.874446] [<c109f608>] ?
do_munmap+0x221/0x23b
Oct 7 07:54:49 localhost kernel: [ 1412.874456] [<c109f65b>] ?
sys_munmap+0x39/0x3e
Oct 7 07:54:49 localhost kernel: [ 1412.874470] [<c10030fb>] ?
sysenter_do_call+0x12/0x28
Oct 7 07:54:49 localhost kernel: [ 1412.874476] Code: ce 12 00 31 d2
89 d0 5b 5e c3 55 57 56 53 83 ec 04 89 04 24 8b 1c 24 64 a1 54 39 41
c1 8b 6c 24 18 8b 7b 14 03 3c 85 30 7d 3b c1 <8b> 07 89 c3 89 c6 c1 fe
1f 89 e8 01 d3 11 ce 99 39 d6 7f 15 7c
Oct 7 07:54:49 localhost kernel: [ 1412.874594] EIP: [<c1140c27>]
__percpu_counter_add+0x21/0x6d SS:ESP 0068:f6279cf4
Oct 7 07:54:49 localhost kernel: [ 1412.874609] CR2: 00000000015ef000
Oct 7 07:54:49 localhost kernel: [ 1412.874618] ---[ end trace
aad58f9263b7c46e ]---
Oct 7 07:58:43 localhost kernel: [ 1647.035866] BUG: unable to handle
kernel paging request at 015ef000
Oct 7 07:58:43 localhost kernel: [ 1647.035878] IP: [<c1140c27>]
__percpu_counter_add+0x21/0x6d
Oct 7 07:58:43 localhost kernel: [ 1647.035895] *pde = 00000000
Oct 7 07:58:43 localhost kernel: [ 1647.035901] Oops: 0000 [#2] SMP
Oct 7 07:58:43 localhost kernel: [ 1647.035908] last sysfs file:
/sys/devices/virtual/hwmon/hwmon0/temp1_input
Oct 7 07:58:43 localhost kernel: [ 1647.035914] Modules linked in:
usb_storage xt_multiport iptable_filter ip_tables x_tables
speedstep_lib cpufreq_stats cpufreq_userspace cpufreq_conservative
cpufreq_powersave fuse ext2 ext4 jbd2 crc16 loop snd_wavefront
snd_cs4236 snd_wss_lib snd_opl3_lib snd_hwdep radeon snd_mpu401
snd_mpu401_uart snd_seq_midi snd_seq_midi_event snd_intel8x0
snd_ac97_codec ac97_bus snd_rawmidi snd_pcm snd_seq snd_timer
snd_seq_device i2c_i801 psmouse ttm snd ns558 drm_kms_helper drm
i2c_algo_bit pcspkr gameport soundcore serio_raw evdev snd_page_alloc
i2c_core button shpchp processor rng_core pci_hotplug ext3 jbd mbcache
raid1 md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod cdrom
sd_mod crc_t10dif ata_generic fan 8139too ata_piix uhci_hcd sata_via
thermal 8139cp mii ehci_hcd libata scsi_mod usbcore nls_base
thermal_sys [last unloaded: scsi_wait_scan]
Oct 7 07:58:43 localhost kernel: [ 1647.036055]
Oct 7 07:58:43 localhost kernel: [ 1647.036063] Pid: 3218, comm:
umount Tainted: G D (2.6.32-5-686 #1)
Oct 7 07:58:43 localhost kernel: [ 1647.036069] EIP:
0060:[<c1140c27>] EFLAGS: 00210006 CPU: 1
Oct 7 07:58:43 localhost kernel: [ 1647.036076] EIP is at
__percpu_counter_add+0x21/0x6d
Oct 7 07:58:43 localhost kernel: [ 1647.036081] EAX: 00000001 EBX:
f658600c ECX: 00000000 EDX: 00000001
Oct 7 07:58:43 localhost kernel: [ 1647.036086] ESI: f6a55528 EDI:
015ef000 EBP: 00000010 ESP: f5919ed8
Oct 7 07:58:43 localhost kernel: [ 1647.036091] DS: 007b ES: 007b
FS: 00d8 GS: 00e0 SS: 0068
Oct 7 07:58:43 localhost kernel: [ 1647.036097] Process umount (pid:
3218, ti=f5918000 task=f6287740 task.ti=f5918000)
Oct 7 07:58:43 localhost kernel: [ 1647.036102] Stack:
Oct 7 07:58:43 localhost kernel: [ 1647.036105] f658600c f6287740
f6a55528 00000000 f7144400 c108d515 00000010 00000000
Oct 7 07:58:43 localhost kernel: [ 1647.036118] <0> c1bb3880 c10cded2
00000000 f5e80200 f5866a00 f8c5da83 00000001 028e56ed
Oct 7 07:58:43 localhost kernel: [ 1647.036132] <0> 00000000 f7144400
f63e4000 f5866a00 f5821e80 f8c606e4 f5919f2c f5866a00
Oct 7 07:58:43 localhost kernel: [ 1647.036147] Call Trace:
Oct 7 07:58:43 localhost kernel: [ 1647.036159] [<c108d515>] ?
account_page_dirtied+0x2f/0x4b
Oct 7 07:58:43 localhost kernel: [ 1647.036169] [<c10cded2>] ?
__set_page_dirty+0x44/0x82
Oct 7 07:58:43 localhost kernel: [ 1647.036198] [<f8c5da83>] ?
ext4_commit_super+0x114/0x160 [ext4]
Oct 7 07:58:43 localhost kernel: [ 1647.036217] [<f8c606e4>] ?
ext4_put_super+0xb8/0x292 [ext4]
Oct 7 07:58:43 localhost kernel: [ 1647.036227] [<c10b4e64>] ?
generic_shutdown_super+0x46/0xc6
Oct 7 07:58:43 localhost kernel: [ 1647.036235] [<c10b4efe>] ?
kill_block_super+0x1a/0x2c
Oct 7 07:58:43 localhost kernel: [ 1647.036244] [<c10e3732>] ?
vfs_quota_off+0x0/0xd
Oct 7 07:58:43 localhost kernel: [ 1647.036251] [<c10b549b>] ?
deactivate_super+0x4a/0x5f
Oct 7 07:58:43 localhost kernel: [ 1647.036260] [<c10c5487>] ?
sys_umount+0x2a5/0x2cb
Oct 7 07:58:43 localhost kernel: [ 1647.036268] [<c10c54b8>] ?
sys_oldumount+0xb/0xe
Oct 7 07:58:43 localhost kernel: [ 1647.036277] [<c10030fb>] ?
sysenter_do_call+0x12/0x28
Oct 7 07:58:43 localhost kernel: [ 1647.036281] Code: ce 12 00 31 d2
89 d0 5b 5e c3 55 57 56 53 83 ec 04 89 04 24 8b 1c 24 64 a1 54 39 41
c1 8b 6c 24 18 8b 7b 14 03 3c 85 30 7d 3b c1 <8b> 07 89 c3 89 c6 c1 fe
1f 89 e8 01 d3 11 ce 99 39 d6 7f 15 7c
Oct 7 07:58:43 localhost kernel: [ 1647.036356] EIP: [<c1140c27>]
__percpu_counter_add+0x21/0x6d SS:ESP 0068:f5919ed8
Oct 7 07:58:43 localhost kernel: [ 1647.036366] CR2: 00000000015ef000
Oct 7 07:58:43 localhost kernel: [ 1647.036372] ---[ end trace
aad58f9263b7c46f ]---
Oct 7 07:58:43 localhost kernel: [ 1647.036376] ------------[ cut
here ]------------
Oct 7 07:58:43 localhost kernel: [ 1647.036383] WARNING: at
/tmp/buildd/linux-2.6-2.6.32/debian/build/source_i386_none/kernel/exit.c:902
do_exit+0x30/0x5cd()
Oct 7 07:58:43 localhost kernel: [ 1647.036388] Hardware name:
Oct 7 07:58:43 localhost kernel: [ 1647.036391] Modules linked in:
usb_storage xt_multiport iptable_filter ip_tables x_tables
speedstep_lib cpufreq_stats cpufreq_userspace cpufreq_conservative
cpufreq_powersave fuse ext2 ext4 jbd2 crc16 loop snd_wavefront
snd_cs4236 snd_wss_lib snd_opl3_lib snd_hwdep radeon snd_mpu401
snd_mpu401_uart snd_seq_midi snd_seq_midi_event snd_intel8x0
snd_ac97_codec ac97_bus snd_rawmidi snd_pcm snd_seq snd_timer
snd_seq_device i2c_i801 psmouse ttm snd ns558 drm_kms_helper drm
i2c_algo_bit pcspkr gameport soundcore serio_raw evdev snd_page_alloc
i2c_core button shpchp processor rng_core pci_hotplug ext3 jbd mbcache
raid1 md_mod dm_mirror dm_region_hash dm_log dm_mod sg sr_mod cdrom
sd_mod crc_t10dif ata_generic fan 8139too ata_piix uhci_hcd sata_via
thermal 8139cp mii ehci_hcd libata scsi_mod usbcore nls_base
thermal_sys [last unloaded: scsi_wait_scan]
Oct 7 07:58:43 localhost kernel: [ 1647.036524] Pid: 3218, comm:
umount Tainted: G D 2.6.32-5-686 #1
Oct 7 07:58:43 localhost kernel: [ 1647.036528] Call Trace:
Oct 7 07:58:43 localhost kernel: [ 1647.036537] [<c1030725>] ?
warn_slowpath_common+0x5e/0x8a
Oct 7 07:58:43 localhost kernel: [ 1647.036544] [<c103075b>] ?
warn_slowpath_null+0xa/0xc
Oct 7 07:58:43 localhost kernel: [ 1647.036551] [<c1033344>] ?
do_exit+0x30/0x5cd
Oct 7 07:58:43 localhost kernel: [ 1647.036561] [<c126cba9>] ? printk+0xe/0x15
Oct 7 07:58:43 localhost kernel: [ 1647.036568] [<c126f100>] ?
oops_end+0x98/0x9d
Oct 7 07:58:43 localhost kernel: [ 1647.036577] [<c101b857>] ?
no_context+0x105/0x10e
Oct 7 07:58:43 localhost kernel: [ 1647.036584] [<c101b975>] ?
__bad_area_nosemaphore+0x115/0x11d
Oct 7 07:58:43 localhost kernel: [ 1647.036592] [<c108dccb>] ?
pagevec_lookup_tag+0x1b/0x22
Oct 7 07:58:43 localhost kernel: [ 1647.036601] [<c1088177>] ?
wait_on_page_writeback_range+0x9f/0xdf
Oct 7 07:58:43 localhost kernel: [ 1647.036608] [<c1001f10>] ?
__switch_to+0xcf/0x141
Oct 7 07:58:43 localhost kernel: [ 1647.036627] [<f8c6c724>] ?
ext4_discard_preallocations+0x6f/0x2a9 [ext4]
Oct 7 07:58:43 localhost kernel: [ 1647.036635] [<c1270156>] ?
do_page_fault+0x1bf/0x307
Oct 7 07:58:43 localhost kernel: [ 1647.036643] [<c101b9b6>] ?
bad_area+0x2d/0x32
Oct 7 07:58:43 localhost kernel: [ 1647.036650] [<c126ff97>] ?
do_page_fault+0x0/0x307
Oct 7 07:58:43 localhost kernel: [ 1647.036656] [<c126e7eb>] ?
error_code+0x73/0x78
Oct 7 07:58:43 localhost kernel: [ 1647.036664] [<c1140c27>] ?
__percpu_counter_add+0x21/0x6d
Oct 7 07:58:43 localhost kernel: [ 1647.036672] [<c108d515>] ?
account_page_dirtied+0x2f/0x4b
Oct 7 07:58:43 localhost kernel: [ 1647.036680] [<c10cded2>] ?
__set_page_dirty+0x44/0x82
Oct 7 07:58:43 localhost kernel: [ 1647.036699] [<f8c5da83>] ?
ext4_commit_super+0x114/0x160 [ext4]
Oct 7 07:58:43 localhost kernel: [ 1647.036716] [<f8c606e4>] ?
ext4_put_super+0xb8/0x292 [ext4]
Oct 7 07:58:43 localhost kernel: [ 1647.036725] [<c10b4e64>] ?
generic_shutdown_super+0x46/0xc6
Oct 7 07:58:43 localhost kernel: [ 1647.036733] [<c10b4efe>] ?
kill_block_super+0x1a/0x2c
Oct 7 07:58:43 localhost kernel: [ 1647.036740] [<c10e3732>] ?
vfs_quota_off+0x0/0xd
Oct 7 07:58:43 localhost kernel: [ 1647.036747] [<c10b549b>] ?
deactivate_super+0x4a/0x5f
Oct 7 07:58:43 localhost kernel: [ 1647.036755] [<c10c5487>] ?
sys_umount+0x2a5/0x2cb
Oct 7 07:58:43 localhost kernel: [ 1647.036762] [<c10c54b8>] ?
sys_oldumount+0xb/0xe
Oct 7 07:58:43 localhost kernel: [ 1647.036769] [<c10030fb>] ?
sysenter_do_call+0x12/0x28
Oct 7 07:58:43 localhost kernel: [ 1647.036775] ---[ end trace
aad58f9263b7c470 ]---
Oct 7 08:07:43 localhost kernel: [ 2187.278796] usb 1-3: USB
disconnect, address 3
Oct 7 08:07:43 localhost kernel: [ 2187.532035] usb 1-3: new high
speed USB device using ehci_hcd and address 4
Oct 7 08:07:44 localhost kernel: [ 2187.668309] usb 1-3: New USB
device found, idVendor=1058, idProduct=0901
Oct 7 08:07:44 localhost kernel: [ 2187.668319] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 7 08:07:44 localhost kernel: [ 2187.668325] usb 1-3: Product: External HDD
Oct 7 08:07:44 localhost kernel: [ 2187.668330] usb 1-3:
Manufacturer: Western Digital
Oct 7 08:07:44 localhost kernel: [ 2187.668334] usb 1-3:
SerialNumber: 57442D5743414E4B43383633333636
Oct 7 08:07:44 localhost kernel: [ 2187.668549] usb 1-3:
configuration #1 chosen from 1 choice
Oct 7 08:07:44 localhost kernel: [ 2187.669188] scsi7 : SCSI
emulation for USB Mass Storage devices
Oct 7 08:07:44 localhost kernel: [ 2187.669660] usb-storage: device found at 4
Oct 7 08:07:44 localhost kernel: [ 2187.669672] usb-storage: waiting
for device to settle before scanning
Oct 7 08:07:47 localhost kernel: [ 2191.257231] usb 1-3: USB
disconnect, address 4
Oct 7 08:07:47 localhost kernel: [ 2191.528027] usb 1-3: new high
speed USB device using ehci_hcd and address 5
Oct 7 08:07:48 localhost kernel: [ 2191.664222] usb 1-3: New USB
device found, idVendor=1058, idProduct=0901
Oct 7 08:07:48 localhost kernel: [ 2191.664233] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct 7 08:07:48 localhost kernel: [ 2191.664239] usb 1-3: Product: External HDD
Oct 7 08:07:48 localhost kernel: [ 2191.664244] usb 1-3:
Manufacturer: Western Digital
Oct 7 08:07:48 localhost kernel: [ 2191.664248] usb 1-3:
SerialNumber: 57442D5743414E4B43383633333636
Oct 7 08:07:48 localhost kernel: [ 2191.664459] usb 1-3:
configuration #1 chosen from 1 choice
Oct 7 08:07:48 localhost kernel: [ 2191.664948] scsi8 : SCSI
emulation for USB Mass Storage devices
Oct 7 08:07:48 localhost kernel: [ 2191.665405] usb-storage: device found at 5
Oct 7 08:07:48 localhost kernel: [ 2191.665412] usb-storage: waiting
for device to settle before scanning
Oct 7 08:07:53 localhost kernel: [ 2196.664268] usb-storage: device
scan complete
Oct 7 08:07:53 localhost kernel: [ 2196.699786] scsi 8:0:0:0:
Direct-Access WD 2500JB External 0108 PQ: 0 ANSI: 0
Oct 7 08:07:53 localhost kernel: [ 2196.701145] sd 8:0:0:0: Attached
scsi generic sg5 type 0
Oct 7 08:07:53 localhost kernel: [ 2196.714971] sd 8:0:0:0: [sde]
488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 7 08:07:53 localhost kernel: [ 2196.715969] sd 8:0:0:0: [sde]
Write Protect is off
Oct 7 08:07:53 localhost kernel: [ 2196.715984] sd 8:0:0:0: [sde]
Mode Sense: 03 00 00 00
Oct 7 08:07:53 localhost kernel: [ 2196.715992] sd 8:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 08:07:53 localhost kernel: [ 2196.718092] sd 8:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 08:07:53 localhost kernel: [ 2196.718108] sde: sde1 sde2 sde3 sde4
Oct 7 08:07:53 localhost kernel: [ 2196.721337] sd 8:0:0:0: [sde]
Assuming drive cache: write through
Oct 7 08:07:53 localhost kernel: [ 2196.721352] sd 8:0:0:0: [sde]
Attached SCSI disk
Oct 7 08:13:47 localhost kernel: [ 2551.054439] usb 1-3: USB
disconnect, address 5
I am considering the kerneloops and it's results severe enough to file
a report anyway. Those events are much more concerning to me than
working around the EHCI/USB-related problem.
With regards,
Ad Langerveld
Reply to: