Bug#644279: linux-image-2.6.38-bpo.2-686: Disabling IRQ 10 hang and crash laptops, ALL KERNELS on squeeze & backports
Package: linux-2.6
Version: 2.6.38-5~bpo60+1
Justification: breaks the whole system
Severity: critical
Tags: d-i upstream
The system (independient of kernel even backport version or oficial ) hangs, and stops,
i investigated with dmesg, and so then found this trace :
irq 10: nobody cared (try booting with the "irqpoll" option)
..after few second system hangs! The irq acpi asigned its for sound card when acpi are enabled.
In next boot i disable acpi complety parsing acpi=off and system works perfectly, this
with 2.6.32 or 2.6.38 independiently
PLEASE note that the lspci and others results on report was when acpi are disabled!
I'v also instaled later 2.6.39 from backport and hands but no rare or weird messages on dmesg where found!!!
-- Package-specific info:
** Kernel log: boot messages should be attached
root@massenkoh:/var/log# cat dmesg.0 | grep " 50"
[ 50.898606] irq 10: nobody cared (try booting with the "irqpoll" option)
[ 50.898665] Pid: 0, comm: swapper Not tainted 2.6.38-bpo.2-686 #1
[ 50.898667] Call Trace:
[ 50.898677] [<c106f1ae>] ? __report_bad_irq+0x24/0x69
[ 50.898682] [<c106f1b5>] ? __report_bad_irq+0x2b/0x69
[ 50.898686] [<c106f2da>] ? note_interrupt+0xe7/0x13d
[ 50.898690] [<c106f9f8>] ? handle_level_irq+0x66/0x9b
[ 50.898694] [<c106f992>] ? handle_level_irq+0x0/0x9b
[ 50.898696] <IRQ> [<c1003e1e>] ? do_IRQ+0x2e/0x84
[ 50.898705] [<c10349de>] ? __do_softirq+0x0/0x14e
[ 50.898708] [<c10034b0>] ? common_interrupt+0x30/0x38
[ 50.898712] [<c10349de>] ? __do_softirq+0x0/0x14e
[ 50.898716] [<c103007b>] ? console_unlock+0x10f/0x18e
[ 50.898722] [<c11300d8>] ? md5_transform+0x2fc/0x7b9
[ 50.898726] [<c1034a1c>] ? __do_softirq+0x3e/0x14e
[ 50.898729] [<c10349de>] ? __do_softirq+0x0/0x14e
[ 50.898731] <IRQ> [<c1034962>] ? irq_exit+0x26/0x59
[ 50.898739] [<c1015e54>] ? smp_apic_timer_interrupt+0x6b/0x75
[ 50.898745] [<c1290ad9>] ? apic_timer_interrupt+0x31/0x38
[ 50.898773] [<f8126cde>] ? acpi_idle_enter_bm+0x247/0x284 [processor]
[ 50.898779] [<c11e25bf>] ? cpuidle_idle_call+0xd4/0x15d
[ 50.898782] [<c1002201>] ? cpu_idle+0x95/0xb0
[ 50.898787] [<c13f38a6>] ? start_kernel+0x333/0x338
[ 50.898790] handlers:
[ 50.898811] [<f8480cc5>] (sdhci_irq+0x0/0x45f [sdhci])
[ 50.898870] [<f82754ed>] (tifm_7xx1_isr+0x0/0xb8 [tifm_7xx1])
[ 50.898931] [<f82d2f2f>] (yenta_interrupt+0x0/0xb5 [yenta_socket])
[ 50.898995] [<f8404fdd>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 50.899059] [<f8404fdd>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 50.899121] Disabling IRQ #10
root@massenkoh:/var/log#
also this weird when acpi are enabled:
Sep 12 17:33:19 massenkoh kernel: [ 9.550753] firewire_ohci 0000:07:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
Sep 12 17:33:19 massenkoh kernel: [ 9.590678] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Sep 12 17:33:19 massenkoh kernel: [ 9.590684] ACPI: I/O resource 0000:00:1f.3 [0x18c0-0x18df] conflicts with ACPI
region SMBI [0x18c0-0x18cf]
Sep 12 17:33:19 massenkoh kernel: [ 9.590781] ACPI: If an ACPI driver is available for this device, you should us
e it instead of the native driver
Sep 12 17:33:19 massenkoh kernel: [ 9.604197] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
Sep 12 17:33:19 massenkoh kernel: [ 9.604200] iwlagn: Copyright(c) 2003-2009 Intel Corporation
Sep 12 17:33:19 massenkoh kernel: [ 9.604299] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep 12 17:33:19 massenkoh kernel: [ 9.604335] iwlagn 0000:03:00.0: setting latency timer to 64
Sep 12 17:33:19 massenkoh kernel: [ 9.604395] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=
0x4
** Model information
TOSHIBA Satellite A205 S4607
** Network interface configuration:
auto lo
iface lo inet loopback
wlan and eth0 still not active when kernel hands in mayority cases!
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0a00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f0b00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0a80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Toshiba America Info Systems Toshiba Satellite A100-796 audio (Realtek ALC861) [1179:ff10]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0b40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0600000-f06fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0700000-f07fffff
Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0800000-f08fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0d44000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=0b, sec-latency=56
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f0900000-f09fffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 18b0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18c0 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller [11ab:4353] (rev 14)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
Subsystem: Intel Corporation Vaio VGN-SZ79SN_C [8086:1100]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f0700000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
07:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0906000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 84000000-87fff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
07:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (500ns min, 1000ns max), Cache Line Size: 16 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0905000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f0900000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
07:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0904000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
07:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] (prog-if 01)
Subsystem: Toshiba America Info Systems Device [1179:ff10]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0905800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd USB 2.0 Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-bpo.2-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii linux-base 3.3~bpo60+1 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-bpo.2-686 recommends:
ii firmware-linux-free 2.6.32-35squeeze2 Binary firmware for various driver
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.38-bpo.2-686 suggests:
ii grub-pc 1.98+20100804-14 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-bpo.2-686 is related to:
ii firmware-bnx2 0.32~bpo60+1 Binary firmware for Broadcom NetXt
ii firmware-bnx2x 0.32~bpo60+1 Binary firmware for Broadcom NetXt
ii firmware-ipw2x00 0.32~bpo60+1 Binary firmware for Intel Pro Wire
ii firmware-ivtv 0.32~bpo60+1 Binary firmware for iTVC15-family
ii firmware-iwlwifi 0.32~bpo60+1 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.32~bpo60+1 Binary firmware for various driver
ii firmware-qlogic 0.32~bpo60+1 Binary firmware for QLogic IBA7220
ii firmware-ralink 0.32~bpo60+1 Binary firmware for Ralink wireles
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-bpo.2-686/postinst/depmod-error-initrd-2.6.38-bpo.2-686: false
linux-image-2.6.38-bpo.2-686/postinst/missing-firmware-2.6.38-bpo.2-686:
linux-image-2.6.38-bpo.2-686/prerm/removing-running-kernel-2.6.38-bpo.2-686: true
linux-image-2.6.38-bpo.2-686/postinst/ignoring-do-bootloader-2.6.38-bpo.2-686:
--
Lenz McKAY Gerardo (PICCORO)
http://qgqlochekone.blogspot.com
Cofundador de Venenux; debian based multimedia alike free only zealots users (oh well, i try but..too many free guidelines buahhh)
http://shutendouji.net
creador de massenkoh linux; debian enhanchements for better up to date support on stable brand, including non-free soft.
Reply to: