[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#622259: marked as done (linux-image-2.6.32-5-686: resuming from hibernation sometimes fails on eeepc 1002HA)



Your message dated Fri, 30 Sep 2011 20:12:51 +0000
with message-id <E1R9jRz-00077A-H5@franck.debian.org>
and subject line Bug#622259: fixed in user-mode-linux 2.6.32-1um-4+37
has caused the Debian Bug report #622259,
regarding linux-image-2.6.32-5-686: resuming from hibernation sometimes fails on eeepc 1002HA
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
622259: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=622259
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-31
Severity: normal

    Hello,

  Since version 2.6.32-30, the Squeeze's Debian Linux kernel sometimes fails to
resume from hibernation on my Asus eeepc 1002HA. As stated in bug #611750, I've
observed that when resuming from hibernation, sometimes my computer was
returning to Grub2's menu (without any error message), and I had to do a
"normal" boot on my Debian Squeeze system (with file systems corrections),
loosing my hibernation's state.
  The fail isn't automatic, but seems to happen more frequently after a while
my computer was disconnected from AC and battery.

  On my system, I've first done a "git bisect" to identify the culprit patch
(testing hibernation / resume about 5 times before to tag it 'ok'), and found a
security uptstream patch 2.6.32.28.
  Then, I've done a manual bisecting among patches included in this security
patch, and actually found that my problem comes from :

x86-hotplug-use-mwait-to-offline-a-processor-fix-the-legacy-case.patch

I've tested the original Debian Linux kernel 2.6.32-31, I got the same problem,
and I'm now running a modified version of 2.6.32-31 with this former patch
reverted, with success since then (about 3 weeks).

I'm defining this new separate bug report following Ben Hutchings' suggestion
in #611750 report.


    Fred.



-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
not available

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory
Controller Hub [8086:27ac] (rev 03)
        Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME
Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA
controller])
        Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fbd00000 (32-bit, non-prefetchable) [size=512K]
        Region 1: I/O ports at dc80 [size=8]
        Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Region 3: Memory at fbcc0000 (32-bit, non-prefetchable) [size=256K]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915
        Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
        Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at fbd80000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
        Subsystem: ASUSTeK Computer Inc. Device [1043:834a]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fbcb8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: 40000000-401fffff
        Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fbf00000-fbffffff
        Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: fbe00000-fbefffff
        Prefetchable memory behind bridge: 0000000040600000-00000000407fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at d480 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 22
        Region 4: I/O ports at d800 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 21
        Region 4: I/O ports at d880 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 20
        Region 4: I/O ports at dc00 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at fbcb7c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
        Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel modules: intel-rng, iTCO_wdt

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
        Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at ffa0 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: ata_piix
        Kernel modules: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
        Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at 0400 [size=32]
        Kernel modules: i2c-i801

01:00.0 Network controller [0280]: Atheros Communications Inc. AR928X Wireless
Network Adapter (PCI-Express) [168c:002a] (rev 01)
        Subsystem: AzureWave Device [1a3b:1067]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: ath9k
        Kernel modules: ath9k

02:00.0 Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114
Gigabit or Fast Ethernet [1969:1026] (rev b0)
        Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 27
        Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
        Region 2: I/O ports at ec80 [size=128]
        Capabilities: <access denied>
        Kernel driver in use: ATL1E
        Kernel modules: atl1e



** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 047d:1020 Kensington Expert Mouse Trackball
Bus 001 Device 004: ID 1e54:2030 TypeMatrix 2030 USB Keyboard
Bus 001 Device 003: ID 05e3:0505 Genesys Logic, Inc. 
Bus 001 Device 002: ID 050d:0307 Belkin Components 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.1
  APT prefers stable
  APT policy: (990, 'stable'), (800, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-atl1e-hib (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-686 depends on:
ii  debconf [debconf-2.0]         1.5.36.1   Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98.8     tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-686 recommends:
ii  firmware-linux-free           2.6.32-31  Binary firmware for various driver
ii  libc6-i686                    2.11.2-10  Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.32-5-686 suggests:
ii  grub                          0.97-64    GRand Unified Bootloader (dummy pa
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-686 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
  linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
  linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
  linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
  linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
  linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
  linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:



--- End Message ---
--- Begin Message ---
Source: user-mode-linux
Source-Version: 2.6.32-1um-4+37

We believe that the bug you reported is fixed in the latest version of
user-mode-linux, which is due to be installed in the Debian FTP archive:

user-mode-linux_2.6.32-1um-4+37.diff.gz
  to main/u/user-mode-linux/user-mode-linux_2.6.32-1um-4+37.diff.gz
user-mode-linux_2.6.32-1um-4+37.dsc
  to main/u/user-mode-linux/user-mode-linux_2.6.32-1um-4+37.dsc
user-mode-linux_2.6.32-1um-4+37_amd64.deb
  to main/u/user-mode-linux/user-mode-linux_2.6.32-1um-4+37_amd64.deb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 622259@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
dann frazier <dannf@debian.org> (supplier of updated user-mode-linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Thu, 29 Sep 2011 20:23:36 -0600
Source: user-mode-linux
Binary: user-mode-linux
Architecture: source amd64
Version: 2.6.32-1um-4+37
Distribution: stable
Urgency: high
Maintainer: User Mode Linux Maintainers <pkg-uml-pkgs@lists.alioth.debian.org>
Changed-By: dann frazier <dannf@debian.org>
Description: 
 user-mode-linux - User-mode Linux (kernel)
Closes: 566522 620848 622259 622745 622997 627700 627702 627704 627705 630730 631465 632778 637659 637848 638656 638956 639425 639426 640650 641232 641419 642380
Changes: 
 user-mode-linux (2.6.32-1um-4+37) stable; urgency=high
 .
   * Rebuild against linux-source-2.6.32 (2.6.32-37):
     * pm: Fix definition of SET_SYSTEM_SLEEP_PM_OPS used in backported drivers
       (fixes FTBFS on ia64)
     * splice: Fix write position in output file (Closes: #641419)
     * PCI: Add definition of pci_pcie_cap(), used in backported e1000e
       (fixes FTBFS on armel, mips, mipsel, sparc)
     * [openvz] cpt: Allow ext4 mounts (Closes: #642380)
     * Add drm change from 2.6.32.41+drm33.18:
       - drm/radeon/kms: fix bad shift in atom iio table parser
     * [opvenz] ptrace: Don't allow to trace a process without memory map.
     * Add drm change from 2.6.32.42+drm33.19, including:
       - drm/i915: Add a no lvds quirk for the Asus EeeBox PC EB1007
       - drm/radeon/kms: fix for radeon on systems >4GB without hardware iommu
     * Add longterm release 2.6.32.43, including:
       - ksm: fix NULL pointer dereference in scan_get_next_rmap_item()
         (CVE-2011-2183)
       - TTY: ldisc, do not close until there are readers
       - uvcvideo: Remove buffers from the queues when freeing
       - inet_diag: fix inet_diag_bc_audit() (CVE-2011-2213)
       - net: filter: Use WARN_RATELIMIT
       - af_packet: prevent information leak
       - ipv6/udp: Use the correct variable to determine non-blocking condition
       - mm: prevent concurrent unmap_mapping_range() on the same inode
       For the complete list of changes, see:
        http://www.kernel.org/pub/linux/kernel/v2.6/longterm/v2.6.32/ChangeLog-2.6.32.43
       and the bug report which this closes: #637848.
     * Add longterm release 2.6.32.42, including:
       - ftrace: Only update the function code on write to filter files
       - kmemleak: Do not return a pointer to an object that kmemleak did not get
       - ext3: Fix fs corruption when make_indexed_dir() fails
       - jbd: fix fsync() tid wraparound bug
       - PCI: allow matching of prefetchable resources to non-prefetchable windows
         (Closes: #637659)
       - loop: handle on-demand devices correctly
       - xhci: Fix full speed bInterval encoding; fix interval calculation for
         FS isoc endpoints (regressions in 2.6.32-34)
       - OHCI: fix regression caused by nVidia shutdown workaround
         (regression in 2.6.32-31)
       - brd: handle on-demand devices correctly
       - xen mmu: fix a race window causing leave_mm BUG()
       - SCSI: Fix oops caused by queue refcounting failure
       - fat: Fix corrupt inode flags when remove ATTR_SYS flag
       - pata_cm64x: fix boot crash on parisc (Closes: #622745, #622997)
       - Revert "iwlagn: Support new 5000 microcode." (Closes: #632778)
       For the complete list of changes, see:
        http://www.kernel.org/pub/linux/kernel/v2.6/longterm/v2.6.32/ChangeLog-2.6.32.42
       and the bug report which this closes: #631465.
     * [vserver] Update patch to 2.6.32.41-vs2.3.0.36.29.7
       - Apply sched changes deferred from 2.6.32.29
     * e1000e: Backport changes up to Linux 2.6.38 (Closes: #627700)
       - Add support for i82567V-4 and i82579
       - Fix support for i82577, i82578 and i82583
     * e1000e: Fix selection of alternate MAC address on device id 0x1060
       (regression in 2.6.34)
     * igb,igbvf: Backport changes up to Linux 3.0.4 (Closes: #627702)
       - Add support for i82576-ET2, i82580, DH89xxCC, i340 and i350
     * r8169: Backport changes up to Linux 3.0.2 (Closes: #627704)
       - Fix support for RTL8102E and RTL8168DP
       - Add support for RTL8105E, RTL8168E and another variant of RTL8168DP
       - Add support for D-Link DGE-530T rev C1
     * tg3,broadcom: Backport changes up to Linux 2.6.38 (Closes: #627705)
       - Add support for BCM5717, BCM5719, BCM57765
       - Add support for BCM50610M and BCM5241 PHYs
       - Fix support for BCM5755
     * Remove net device features from bug reports (Closes: #638956)
     * Revert "net/ipv4: Check for mistakenly passed in non-IPv4 address"
       included in 2.6.32.43, which might break some applications
     * Add longterm release 2.6.32.44, including:
       - NFSv4.1: update nfs4_fattr_bitmap_maxsz
       - hwmon: (max1111) Fix race condition causing NULL pointer exception
       - bridge: send proper message_age in config BPDU
       - USB: OHCI: fix another regression for NVIDIA controllers
         (Closes: #620848)
       - ext3: Fix oops in ext3_try_to_allocate_with_rsv()
       - svcrpc: fix list-corrupting race on nfsd shutdown
       - alpha: fix several security issues (CVE-2011-2208, CVE-2011-2209,
         CVE-2011-2210, CVE-2011-2211)
       - ALSA: sound/core/pcm_compat.c: adjust array index
       - atm: [br2684] allow routed mode operation again
       For the complete list of changes, see:
        http://www.kernel.org/pub/linux/kernel/v2.6/longterm/v2.6.32/ChangeLog-2.6.32.44
       and the bug report which this closes: #639425.
     * Add longterm release 2.6.32.45, including:
       - ALSA: timer - Fix Oops at closing slave timer
       For the complete list of changes, see:
        http://www.kernel.org/pub/linux/kernel/v2.6/longterm/v2.6.32/ChangeLog-2.6.32.45
       and the bug report which this closes: #639426.
     * sched: Work around sched_group::cpu_power == 0 (Ameliorates: #636797)
     * [x86] Revert "x86, hotplug: Use mwait to offline a processor, fix the
       legacy case" (Closes: #622259)
     * Fix bugs in IPv6 forwarding with GRO/GSO (Closes: #630730):
       - e1000e,igb,igbvf,ixgbe: Fix IPv6 GSO type checks
       - ipv6: Add GSO support on forwarding path
     * devpts: correctly check d_alloc_name() return code (Closes: #640650)
     * ipv6: make fragment identifications less predictable (CVE-2011-2699)
     * Add longterm release 2.6.32.46, including:
       - atm: br2864: sent packets truncated in VC routed mode (Closes: #638656)
       - hwmon: (ibmaem) add missing kfree
       - ALSA: snd-usb-caiaq: Correct offset fields of outbound iso_frame_desc
       - ALSA: snd_usb_caiaq: track submitted output urbs
       - futex: Fix regression with read only mappings
       - x86-32, vdso: On system call restart after SYSENTER, use int $0x80
       - fuse: check size of FUSE_NOTIFY_INVAL_ENTRY message
       For the complete list of changes, see:
        http://www.kernel.org/pub/linux/kernel/v2.6/longterm/v2.6.32/ChangeLog-2.6.32.46
       and the bug report which this closes: #641232.
     * drm/ttm: fix ttm_bo_add_ttm(user) failure path
     * 3c503: fix broken IRQ autoprobing (Closes: #566522)
Checksums-Sha1: 
 1869e4e3bd2255256fd88bc2aa88a25d091c7d73 2030 user-mode-linux_2.6.32-1um-4+37.dsc
 73f04e650f2499dd02305298445072482658725e 17952 user-mode-linux_2.6.32-1um-4+37.diff.gz
 2bb102c3be4aa861b343fe0c23e82774ebd67ecc 7079528 user-mode-linux_2.6.32-1um-4+37_amd64.deb
Checksums-Sha256: 
 eed0a5cfbe40d929734f9d69eb92582b93c637ccf943ecc7bdcd6879cb372d6a 2030 user-mode-linux_2.6.32-1um-4+37.dsc
 ebf8970ea4b463ad781f9d70ac6e366f79876b181b200403b71f5731922462e4 17952 user-mode-linux_2.6.32-1um-4+37.diff.gz
 15d735560016bef67c765b55eb69e7946895fe96cea980597462a49150bf116a 7079528 user-mode-linux_2.6.32-1um-4+37_amd64.deb
Files: 
 211981a8378401bd4a2e23930d597f3e 2030 kernel extra user-mode-linux_2.6.32-1um-4+37.dsc
 bdf1b260c42d7fceb8156eb4259a1682 17952 kernel extra user-mode-linux_2.6.32-1um-4+37.diff.gz
 037c61fd01e7007d7dfc613b68ddc90d 7079528 kernel extra user-mode-linux_2.6.32-1um-4+37_amd64.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
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=6K8r
-----END PGP SIGNATURE-----



--- End Message ---

Reply to: