--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-trunk-486: eth0 silently disapear after upgrading from 2.6.30 to 2.6.32-trunk (3c503)
- From: Piotr Skólski <sql7@wp.pl>
- Date: Sat, 23 Jan 2010 19:17:11 +0100
- Message-id: <4b5b3d27d26400.14274842@wp.pl>
Package: linux-2.6
Version: 2.6.32-5
Severity: important
ifconfig don't see eth0, dhclient fail and internet connection disapear
without any error for googling :(
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-486 (Debian 2.6.32-5) (ben@decadent.org.uk)
(gcc version 4.3.4 (Debian 4.3.4-6) ) #1 Sun Jan 10 05:53:18 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-486
root=UUID=27a15c89-8b23-4a95-a869-d86abaee49ef ro quiet
** Not tainted
** Kernel log:
[ 2.104667] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.105029] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.106610] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.107346] 00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.108468] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq
1,12
[ 2.108986] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.109025] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.109854] mice: PS/2 mouse device common for all mice
[ 2.109977] Driver 'rtc_cmos' needs updating - please use bus_type
methods
[ 2.110543] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.110608] rtc0: alarms up to one day, 114 bytes nvram
[ 2.110875] EISA: Probing bus 0 at eisa.0
[ 2.110928] Cannot allocate resource for EISA slot 5
[ 2.110959] EISA: Detected 0 cards.
[ 2.110974] cpuidle: using governor ladder
[ 2.110985] cpuidle: using governor menu
[ 2.111011] No iBFT detected.
[ 2.113173] TCP cubic registered
[ 2.115119] NET: Registered protocol family 10
[ 2.117941] lo: Disabled Privacy Extensions
[ 2.119567] Mobile IPv6
[ 2.119586] NET: Registered protocol family 17
[ 2.119646] Using IPI Shortcut mode
[ 2.120531] registered taskstats version 1
[ 2.121046] rtc_cmos 00:03: setting system clock to 2010-01-23
17:18:48 UTC (1264267128)
[ 2.121292] Freeing unused kernel memory: 436k freed
[ 2.126361] Write protecting the kernel text: 2260k
[ 2.126458] Write protecting the kernel read-only data: 848k
[ 2.139997] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 3.797244] Linux agpgart interface v0.103
[ 3.876992] Uniform Multi-Platform E-IDE driver
[ 3.920709] agpgart: Detected VIA Apollo MVP3 chipset
[ 3.930178] FDC 0 is a post-1991 82077
[ 3.937462] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 3.938867] via82cxxx 0000:00:07.1: VIA vt82c586b (rev 47) IDE UDMA33
[ 3.938895] via82cxxx 0000:00:07.1: IDE controller (0x1106:0x0571 rev
0x06)
[ 3.938951] via82cxxx 0000:00:07.1: IDE port disabled
[ 3.939027] via82cxxx 0000:00:07.1: not 100% native mode: will probe
irqs later
[ 3.939054] ide0: BM-DMA at 0xe000-0xe007
[ 3.939106] Probing IDE interface ide0...
[ 4.056912] usbcore: registered new interface driver usbfs
[ 4.058193] usbcore: registered new interface driver hub
[ 4.059578] usbcore: registered new device driver usb
[ 4.096239] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.124042] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.272573] hda: SAMSUNG SV1021H, ATA DISK drive
[ 4.776537] hdb: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
[ 4.776807] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.776905] hda: UDMA/33 mode selected
[ 4.777000] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.777258] hdb: UDMA/33 mode selected
[ 4.777589] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.779054] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 4.779198] uhci_hcd 0000:00:07.2: new USB bus registered, assigned
bus number 1
[ 4.779283] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000e400
[ 4.779607] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
[ 4.779624] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.779638] usb usb1: Product: UHCI Host Controller
[ 4.779650] usb usb1: Manufacturer: Linux 2.6.32-trunk-486 uhci_hcd
[ 4.779663] usb usb1: SerialNumber: 0000:00:07.2
[ 4.781020] usb usb1: configuration #1 chosen from 1 choice
[ 4.791311] hub 1-0:1.0: USB hub found
[ 4.791409] hub 1-0:1.0: 2 ports detected
[ 4.930528] SCSI subsystem initialized
[ 5.102635] libata version 3.00 loaded.
[ 5.197909] ide-gd driver 1.18
[ 5.198085] hda: max request size: 128KiB
[ 5.226209] ide-cd driver 5.00
[ 5.236692] hda: 19932192 sectors (10205 MB) w/426KiB Cache,
CHS=19774/16/63
[ 5.236714] hda: cache flushes not supported
[ 5.237045] hda: hda1 hda2 < hda5 hda6 >
[ 5.288204] ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive,
2048kB Cache
[ 5.288240] Uniform CD-ROM driver Revision: 3.20
[ 5.986144] PM: Starting manual resume from disk
[ 6.175391] kjournald starting. Commit interval 5 seconds
[ 6.175461] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.479817] udev: starting version 150
[ 14.667749] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 15.269817] psmouse serio1: ID: 10 00 64
[ 15.628708] ns558 01:01.03: activated
[ 15.647698] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.724425] gameport: NS558 PnP Gameport is pnp01:01.03/gameport0, io
0x200, speed 718kHz
[ 15.804858] parport_pc 00:0d: reported by Plug and Play BIOS
[ 15.804951] parport0: PC-style at 0x3bc (0x7bc), irq 7 [PCSPP,TRISTATE]
[ 15.809683] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 15.856413] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input2
[ 19.878437] sbawe 01:01.00: activated
[ 19.882562] sbawe 01:01.02: activated
[ 22.304220] Adding 240932k swap on /dev/hda6. Priority:-1 extents:1
across:240932k
[ 22.785031] EXT3 FS on hda1, internal journal
[ 23.222474] 3c503.c: Presently autoprobing (not recommended) for a
single card.
[ 23.222555] eth%d: 3c503 at i/o base 0x300, node 02:60:8c:8f:72:cf,
using internal xcvr.
[ 23.229421] eth0: 3c503-PIO, 16kB RAM, using programmed I/O (REJUMPER
for SHARED MEMORY).
[ 23.410611] loop: module loaded
[ 24.699634] kjournald starting. Commit interval 5 seconds
[ 24.700387] EXT3 FS on hda5, internal journal
[ 24.700411] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.349438] fuse init (API version 7.13)
[ 46.585400] lp0: using parport0 (interrupt-driven).
[ 46.640997] ppdev: user-space parallel port driver
** Model information
not available
** Loaded modules:
Module Size Used by
ppdev 4006 0
lp 5410 0
acpi_cpufreq 3582 0
processor 22467 1 acpi_cpufreq
cpufreq_powersave 602 0
cpufreq_stats 1592 0
cpufreq_conservative 3902 0
cpufreq_userspace 1268 0
binfmt_misc 4687 1
fuse 42551 1
loop 9529 0
3c503 3433 0
8390p 6201 1 3c503
snd_sb16 5980 0
snd_sbawe 24697 1
snd_opl3_lib 6130 2 snd_sb16,snd_sbawe
snd_sb16_dsp 5800 2 snd_sb16,snd_sbawe
snd_sb16_csp 7389 2 snd_sb16,snd_sbawe
snd_sb_common 9170 4
snd_sb16,snd_sbawe,snd_sb16_dsp,snd_sb16_csp
snd_hwdep 4022 2 snd_opl3_lib,snd_sb16_csp
snd_mpu401_uart 4155 2 snd_sb16,snd_sbawe
snd_pcm_oss 28359 0
snd_mixer_oss 10473 1 snd_pcm_oss
snd_pcm 46210 4
snd_sb16,snd_sbawe,snd_sb16_dsp,snd_pcm_oss
snd_seq_midi 3476 0
snd_rawmidi 12545 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 3848 1 snd_seq_midi
snd_seq 35389 3 snd_seq_midi,snd_seq_midi_event
snd_timer 12292 3 snd_opl3_lib,snd_pcm,snd_seq
snd_seq_device 3661 5
snd_sbawe,snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
shpchp 21184 0
parport_pc 15747 1
snd 33286 18
snd_sb16,snd_sbawe,snd_opl3_lib,snd_sb16_dsp,snd_sb16_csp,snd_sb_common,snd_hwdep,snd_mpu401_uart,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ns558 1599 0
i2c_via 1791 0
pci_hotplug 18013 1 shpchp
parport 22170 3 ppdev,lp,parport_pc
soundcore 3294 1 snd
snd_page_alloc 4953 1 snd_pcm
gameport 6069 2 ns558
i2c_algo_bit 3489 1 i2c_via
psmouse 48166 0
i2c_core 12564 2 i2c_via,i2c_algo_bit
evdev 5520 3
serio_raw 2912 0
pcspkr 1235 0
ext3 92372 2
jbd 27750 1 ext3
mbcache 3482 1 ext3
ide_cd_mod 21036 0
ide_gd_mod 17107 4
cdrom 26487 1 ide_cd_mod
ide_pci_generic 1920 0
ata_generic 2011 0
libata 115238 1 ata_generic
scsi_mod 101981 1 libata
uhci_hcd 15921 0
ehci_hcd 27376 0
usbcore 97846 3 uhci_hcd,ehci_hcd
via82cxxx 4378 3
via_agp 4604 1
floppy 41131 0
nls_base 4445 1 usbcore
ide_core 63934 4
ide_cd_mod,ide_gd_mod,ide_pci_generic,via82cxxx
agpgart 19100 1 via_agp
thermal_sys 9346 1 processor
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 02:60:8c:8f:72:cf brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive |
Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 560 8 0 0 0 0 0 0 560
8 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
8 total packets received
0 forwarded
0 incoming packets discarded
8 incoming packets delivered
8 requests sent out
8 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
0 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
0 segments received
0 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
8 packets received
0 packets to unknown port received.
0 packet receive errors
8 packets sent
UdpLite:
TcpExt:
0 packet headers predicted
IpExt:
InOctets: 560
OutOctets: 560
*** Device features:
eth0: 0x0
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C598 [Apollo
MVP3] [1106:0598] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] [1106:8598] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: e6000000-e6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C586/A/B
PCI-to-ISA [Apollo VP] [1106:0586] (rev 47)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev
06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at e000 [size=16]
Kernel driver in use: VIA_IDE
00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller [1106:3038] (rev 02) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
00:07.3 Bridge [0680]: VIA Technologies, Inc. VT82C586B ACPI [1106:3040]
(rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: vt586b_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV4 [RIVA
TNT] [10de:0020] (rev 04) (prog-if 00 [VGA controller])
Subsystem: Creative Labs Graphics Blaster CT6710 [1102:1015]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 15
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e6000000 (32-bit, prefetchable) [size=16M]
Expansion ROM at e5000000 [disabled] [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i586)
Kernel: Linux 2.6.32-trunk-486
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-486 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an
initramfs
ii module-init-tools 3.11-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.32-trunk-486 recommends:
ii firmware-linux-free 2.6.32-5 Binary firmware for various
driver
Versions of packages linux-image-2.6.32-trunk-486 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-486 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-486/prerm/would-invalidate-boot-loader-2.6.32-trunk-486:
true
linux-image-2.6.32-trunk-486/postinst/bootloader-error-2.6.32-trunk-486:
linux-image-2.6.32-trunk-486/postinst/bootloader-test-error-2.6.32-trunk-486:
* linux-image-2.6.32-trunk-486/postinst/missing-firmware-2.6.32-trunk-486:
linux-image-2.6.32-trunk-486/postinst/depmod-error-initrd-2.6.32-trunk-486:
false
linux-image-2.6.32-trunk-486/prerm/removing-running-kernel-2.6.32-trunk-486:
true
--- End Message ---
--- Begin Message ---
- To: 566522-close@bugs.debian.org
- Subject: Bug#566522: fixed in user-mode-linux 2.6.32-1um-4+37
- From: dann frazier <dannf@debian.org>
- Date: Fri, 30 Sep 2011 20:12:51 +0000
- Message-id: <E1R9jRz-000771-F6@franck.debian.org>
Source: user-mode-linux
Source-Version: 2.6.32-1um-4+37
We believe that the bug you reported is fixed in the latest version of
user-mode-linux, which is due to be installed in the Debian FTP archive:
user-mode-linux_2.6.32-1um-4+37.diff.gz
to main/u/user-mode-linux/user-mode-linux_2.6.32-1um-4+37.diff.gz
user-mode-linux_2.6.32-1um-4+37.dsc
to main/u/user-mode-linux/user-mode-linux_2.6.32-1um-4+37.dsc
user-mode-linux_2.6.32-1um-4+37_amd64.deb
to main/u/user-mode-linux/user-mode-linux_2.6.32-1um-4+37_amd64.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 566522@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
dann frazier <dannf@debian.org> (supplier of updated user-mode-linux package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Thu, 29 Sep 2011 20:23:36 -0600
Source: user-mode-linux
Binary: user-mode-linux
Architecture: source amd64
Version: 2.6.32-1um-4+37
Distribution: stable
Urgency: high
Maintainer: User Mode Linux Maintainers <pkg-uml-pkgs@lists.alioth.debian.org>
Changed-By: dann frazier <dannf@debian.org>
Description:
user-mode-linux - User-mode Linux (kernel)
Closes: 566522 620848 622259 622745 622997 627700 627702 627704 627705 630730 631465 632778 637659 637848 638656 638956 639425 639426 640650 641232 641419 642380
Changes:
user-mode-linux (2.6.32-1um-4+37) stable; urgency=high
.
* Rebuild against linux-source-2.6.32 (2.6.32-37):
* pm: Fix definition of SET_SYSTEM_SLEEP_PM_OPS used in backported drivers
(fixes FTBFS on ia64)
* splice: Fix write position in output file (Closes: #641419)
* PCI: Add definition of pci_pcie_cap(), used in backported e1000e
(fixes FTBFS on armel, mips, mipsel, sparc)
* [openvz] cpt: Allow ext4 mounts (Closes: #642380)
* Add drm change from 2.6.32.41+drm33.18:
- drm/radeon/kms: fix bad shift in atom iio table parser
* [opvenz] ptrace: Don't allow to trace a process without memory map.
* Add drm change from 2.6.32.42+drm33.19, including:
- drm/i915: Add a no lvds quirk for the Asus EeeBox PC EB1007
- drm/radeon/kms: fix for radeon on systems >4GB without hardware iommu
* Add longterm release 2.6.32.43, including:
- ksm: fix NULL pointer dereference in scan_get_next_rmap_item()
(CVE-2011-2183)
- TTY: ldisc, do not close until there are readers
- uvcvideo: Remove buffers from the queues when freeing
- inet_diag: fix inet_diag_bc_audit() (CVE-2011-2213)
- net: filter: Use WARN_RATELIMIT
- af_packet: prevent information leak
- ipv6/udp: Use the correct variable to determine non-blocking condition
- mm: prevent concurrent unmap_mapping_range() on the same inode
For the complete list of changes, see:
http://www.kernel.org/pub/linux/kernel/v2.6/longterm/v2.6.32/ChangeLog-2.6.32.43
and the bug report which this closes: #637848.
* Add longterm release 2.6.32.42, including:
- ftrace: Only update the function code on write to filter files
- kmemleak: Do not return a pointer to an object that kmemleak did not get
- ext3: Fix fs corruption when make_indexed_dir() fails
- jbd: fix fsync() tid wraparound bug
- PCI: allow matching of prefetchable resources to non-prefetchable windows
(Closes: #637659)
- loop: handle on-demand devices correctly
- xhci: Fix full speed bInterval encoding; fix interval calculation for
FS isoc endpoints (regressions in 2.6.32-34)
- OHCI: fix regression caused by nVidia shutdown workaround
(regression in 2.6.32-31)
- brd: handle on-demand devices correctly
- xen mmu: fix a race window causing leave_mm BUG()
- SCSI: Fix oops caused by queue refcounting failure
- fat: Fix corrupt inode flags when remove ATTR_SYS flag
- pata_cm64x: fix boot crash on parisc (Closes: #622745, #622997)
- Revert "iwlagn: Support new 5000 microcode." (Closes: #632778)
For the complete list of changes, see:
http://www.kernel.org/pub/linux/kernel/v2.6/longterm/v2.6.32/ChangeLog-2.6.32.42
and the bug report which this closes: #631465.
* [vserver] Update patch to 2.6.32.41-vs2.3.0.36.29.7
- Apply sched changes deferred from 2.6.32.29
* e1000e: Backport changes up to Linux 2.6.38 (Closes: #627700)
- Add support for i82567V-4 and i82579
- Fix support for i82577, i82578 and i82583
* e1000e: Fix selection of alternate MAC address on device id 0x1060
(regression in 2.6.34)
* igb,igbvf: Backport changes up to Linux 3.0.4 (Closes: #627702)
- Add support for i82576-ET2, i82580, DH89xxCC, i340 and i350
* r8169: Backport changes up to Linux 3.0.2 (Closes: #627704)
- Fix support for RTL8102E and RTL8168DP
- Add support for RTL8105E, RTL8168E and another variant of RTL8168DP
- Add support for D-Link DGE-530T rev C1
* tg3,broadcom: Backport changes up to Linux 2.6.38 (Closes: #627705)
- Add support for BCM5717, BCM5719, BCM57765
- Add support for BCM50610M and BCM5241 PHYs
- Fix support for BCM5755
* Remove net device features from bug reports (Closes: #638956)
* Revert "net/ipv4: Check for mistakenly passed in non-IPv4 address"
included in 2.6.32.43, which might break some applications
* Add longterm release 2.6.32.44, including:
- NFSv4.1: update nfs4_fattr_bitmap_maxsz
- hwmon: (max1111) Fix race condition causing NULL pointer exception
- bridge: send proper message_age in config BPDU
- USB: OHCI: fix another regression for NVIDIA controllers
(Closes: #620848)
- ext3: Fix oops in ext3_try_to_allocate_with_rsv()
- svcrpc: fix list-corrupting race on nfsd shutdown
- alpha: fix several security issues (CVE-2011-2208, CVE-2011-2209,
CVE-2011-2210, CVE-2011-2211)
- ALSA: sound/core/pcm_compat.c: adjust array index
- atm: [br2684] allow routed mode operation again
For the complete list of changes, see:
http://www.kernel.org/pub/linux/kernel/v2.6/longterm/v2.6.32/ChangeLog-2.6.32.44
and the bug report which this closes: #639425.
* Add longterm release 2.6.32.45, including:
- ALSA: timer - Fix Oops at closing slave timer
For the complete list of changes, see:
http://www.kernel.org/pub/linux/kernel/v2.6/longterm/v2.6.32/ChangeLog-2.6.32.45
and the bug report which this closes: #639426.
* sched: Work around sched_group::cpu_power == 0 (Ameliorates: #636797)
* [x86] Revert "x86, hotplug: Use mwait to offline a processor, fix the
legacy case" (Closes: #622259)
* Fix bugs in IPv6 forwarding with GRO/GSO (Closes: #630730):
- e1000e,igb,igbvf,ixgbe: Fix IPv6 GSO type checks
- ipv6: Add GSO support on forwarding path
* devpts: correctly check d_alloc_name() return code (Closes: #640650)
* ipv6: make fragment identifications less predictable (CVE-2011-2699)
* Add longterm release 2.6.32.46, including:
- atm: br2864: sent packets truncated in VC routed mode (Closes: #638656)
- hwmon: (ibmaem) add missing kfree
- ALSA: snd-usb-caiaq: Correct offset fields of outbound iso_frame_desc
- ALSA: snd_usb_caiaq: track submitted output urbs
- futex: Fix regression with read only mappings
- x86-32, vdso: On system call restart after SYSENTER, use int $0x80
- fuse: check size of FUSE_NOTIFY_INVAL_ENTRY message
For the complete list of changes, see:
http://www.kernel.org/pub/linux/kernel/v2.6/longterm/v2.6.32/ChangeLog-2.6.32.46
and the bug report which this closes: #641232.
* drm/ttm: fix ttm_bo_add_ttm(user) failure path
* 3c503: fix broken IRQ autoprobing (Closes: #566522)
Checksums-Sha1:
1869e4e3bd2255256fd88bc2aa88a25d091c7d73 2030 user-mode-linux_2.6.32-1um-4+37.dsc
73f04e650f2499dd02305298445072482658725e 17952 user-mode-linux_2.6.32-1um-4+37.diff.gz
2bb102c3be4aa861b343fe0c23e82774ebd67ecc 7079528 user-mode-linux_2.6.32-1um-4+37_amd64.deb
Checksums-Sha256:
eed0a5cfbe40d929734f9d69eb92582b93c637ccf943ecc7bdcd6879cb372d6a 2030 user-mode-linux_2.6.32-1um-4+37.dsc
ebf8970ea4b463ad781f9d70ac6e366f79876b181b200403b71f5731922462e4 17952 user-mode-linux_2.6.32-1um-4+37.diff.gz
15d735560016bef67c765b55eb69e7946895fe96cea980597462a49150bf116a 7079528 user-mode-linux_2.6.32-1um-4+37_amd64.deb
Files:
211981a8378401bd4a2e23930d597f3e 2030 kernel extra user-mode-linux_2.6.32-1um-4+37.dsc
bdf1b260c42d7fceb8156eb4259a1682 17952 kernel extra user-mode-linux_2.6.32-1um-4+37.diff.gz
037c61fd01e7007d7dfc613b68ddc90d 7079528 kernel extra user-mode-linux_2.6.32-1um-4+37_amd64.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAEBAgAGBQJOhTOuAAoJEBv4PF5U/IZAnxAP/1+3d842OUG8kOQwJWWXFL07
tuLeobScGYt9MYgj+/sfZi3S8cYS547fjXp0oUlvB9H6llFP/IE7rLzCH7oN9tlv
Zuh63bGt7jLPYM6PNYovqpdkWCwMHEjI8jcK8eUk4Tr86HKU6fwsDKoJg3DnoMf+
jbQc6NZHCbg5nmfo41vuoyi6+zrTN1Acpbf+Cj/l+8BQs/2EZ3v03JM9ExfyyUrt
t4h/czCLJi+mRY7LsYgNDcDvT6bY9M+8cG6xlW32GjSV4okIQa73uinUe/87r5s7
rr4V4vcng6uMjawKC124OIPc4Rk1l3JF0V+x96YtSTCtZFTWqPBalaU7aEG8Pim8
5AKRyNXtWP1+wSJG3sPo1AjWhHy43wKNzQmBBWdo/4dBIX+c8GgYZiBN/l/aTOUn
W7WR1GAI7gxvt0MNAFwp2+AZuDJt0QnsgUFm7L6Gooy5em1Rg9qr2JxYt9K4bHs1
8UcSTOSg4Oj5gqHXv7622rb1C46tpniCVZkSuc7qTCceqCkVxX3mzYNGNixNlwiR
q9eOCfUVMMuoA3iJqQ6p42ICTZwgtjzepl85WnTDDr7RUc9iOXGRjdj/448alsbY
YqnIEw6DFweOU1hx7yNTiSHzfuq9Psmatwpu8vhZ0dpVDZal2Fq9sDUkGhk6q+43
dowrO9sr3Ge2Yw3Gswlh
=6K8r
-----END PGP SIGNATURE-----
--- End Message ---