[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#633747: marked as done (/lib/modules/2.6.39-2-686-pae/kernel/drivers/net/wireless/rt2x00/rt61pci.ko: ralink wifi rt61pci not working in 2.6.39-2-686-pae)



Your message dated Mon, 26 Sep 2011 12:37:41 +0200
with message-id <4E8055F5.2070005@adm.at>
and subject line Re: Bug#633747: Acknowledgement (/lib/modules/2.6.39-2-686-pae/kernel/drivers/net/wireless/rt2x00/rt61pci.ko: ralink wifi rt61pci not working in 2.6.39-2-686-pae)
has caused the Debian Bug report #633747,
regarding /lib/modules/2.6.39-2-686-pae/kernel/drivers/net/wireless/rt2x00/rt61pci.ko: ralink wifi rt61pci not working in 2.6.39-2-686-pae
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
633747: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=633747
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.39-2
Severity: normal
File: /lib/modules/2.6.39-2-686-pae/kernel/drivers/net/wireless/rt2x00/rt61pci.ko


In 2.6.39-686-pae kernel, the ralink wifi pci card isn't working, while in a
2.6.38 it is.

$ lspci | grept ralink
32:0b:00.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g

$ lsmod | grept rt
23:rt61pci                22168  0 
24:rt2x00pci              12683  1 rt61pci
25:rt2x00lib              28634  2 rt61pci,rt2x00pci
26:mac80211              164606  2 rt2x00pci,rt2x00lib
27:cfg80211              107076  2 rt2x00lib,mac80211
28:eeprom_93cx6           12423  1 rt61pci
92:crc_itu_t              12331  2 rt61pci,firewire_core

$ modinfo rt61pci
filename:       /lib/modules/2.6.39-2-686-pae/kernel/drivers/net/wireless/rt2x00/rt61pci.ko
license:        GPL
firmware:       rt2661.bin
firmware:       rt2561s.bin
firmware:       rt2561.bin
description:    Ralink RT61 PCI & PCMCIA Wireless LAN driver.
version:        2.3.0
author:         http://rt2x00.serialmonkey.com
srcversion:     12A0A8B7A10EAE6E53E404A
alias:          pci:v00001814d00000401sv*sd*bc*sc*i*
alias:          pci:v00001814d00000302sv*sd*bc*sc*i*
alias:          pci:v00001814d00000301sv*sd*bc*sc*i*
depends:        rt2x00lib,rt2x00pci,eeprom_93cx6,crc-itu-t
intree:         Y
vermagic:       2.6.39-2-686-pae SMP mod_unload modversions 686 
parm:           nohwcrypt:Disable hardware encryption. (bool)




-- Package-specific info:
** Version:
Linux version 2.6.39-2-686-pae (Debian 2.6.39-2) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:33:14 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-686-pae root=UUID=8fe7010b-ba34-4eb0-9a7a-d5343f670dba ro quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[    7.813374] yenta_cardbus 0000:06:05.0: Socket status: 30000006
[    7.813384] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge window: [io  0x2000-0x2fff]
[    7.813388] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x24ff 0x2800-0x28bf
[    7.820049] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf5ffffff]
[    7.820054] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf5ffffff: excluding 0xf0000000-0xf41fffff
[    7.820072] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd7ffffff pref]
[    7.820077] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd7ffffff: excluding 0xd4000000-0xd7ffffff
[    7.823408] yenta_cardbus 0000:0a:09.0: CardBus bridge found [1025:0098]
[    7.823433] yenta_cardbus 0000:0a:09.0: Using CSCINT to route CSC interrupts to PCI
[    7.823436] yenta_cardbus 0000:0a:09.0: Routing CardBus interrupts to PCI
[    7.823444] yenta_cardbus 0000:0a:09.0: TI: mfunc 0x01321b22, devctl 0x66
[    7.859985] [drm] Initialized drm 1.1.0 20060810
[    8.000602] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04713/0x204000/0x0
[    8.053076] yenta_cardbus 0000:0a:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
[    8.053082] yenta_cardbus 0000:0a:09.0: Socket status: 30000820
[    8.053087] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[    8.053098] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
[    8.053104] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x3400-0x34ff
[    8.060036] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff]
[    8.060041] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd020ffff
[    8.060061] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbffffff pref]
[    8.060065] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd8000000-0xdbffffff: excluding 0xd8000000-0xdbffffff
[    8.060185] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[    8.205631] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.205638] i915 0000:00:02.0: setting latency timer to 64
[    8.206941] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    8.206945] [drm] Driver supports precise vblank timestamp query.
[    8.383538] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding nothing: probe failed.
[    8.383612] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding nothing: probe failed.
[    8.383657] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding nothing: probe failed.
[    8.383696] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding nothing: probe failed.
[    8.383740] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[    8.383776] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[    8.383811] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    8.383846] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: excluding nothing: probe failed.
[    8.500119] usb 1-8: usbfs: USBDEVFS_CONTROL failed cmd mtp-probe rqt 128 rq 6 len 1024 ret -110
[    8.513018] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.513449] [drm] initialized overlay support
[    8.654695] Linux media interface: v0.10
[    8.693520] Linux video capture interface: v2.00
[    8.782630] gspca: v2.12.0 registered
[    8.786598] gspca: probing 046d:0892
[    8.786602] vc032x: Sensor POxxxx
[    8.788942] gspca: video0 created
[    8.788964] usbcore: registered new interface driver vc032x
[    8.952061] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
[    8.952095] pci 0000:0b:00.0: [1814:0302] type 0 class 0x000280
[    8.952135] pci 0000:0b:00.0: reg 10: [mem 0xffff8000-0xffffffff]
[    8.952300] pci 0000:0b:00.0: BAR 0: assigned [mem 0xdc000000-0xdc007fff]
[    8.952313] pci 0000:0b:00.0: BAR 0: set to [mem 0xdc000000-0xdc007fff] (PCI address [0xdc000000-0xdc007fff])
[    8.952475] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[    8.954589] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[    8.955429] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[    8.956154] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[    8.956913] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
[    8.956958] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[    8.957000] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    8.957042] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[    9.075273] cfg80211: Calling CRDA to update world regulatory domain
[    9.301847] fbcon: inteldrmfb (fb0) is primary device
[    9.562009] rt61pci 0000:0b:00.0: enabling device (0000 -> 0002)
[    9.562022] rt61pci 0000:0b:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    9.562038] rt61pci 0000:0b:00.0: setting latency timer to 64
[    9.571154] Console: switching to colour frame buffer device 160x50
[    9.577487] fb0: inteldrmfb frame buffer device
[    9.577489] drm: registered panic notifier
[    9.577667] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.577725] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.577793] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    9.577830] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.627901] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.628678] Registered led device: rt61pci-phy0::radio
[    9.628712] Registered led device: rt61pci-phy0::assoc
[    9.656621] udevd[304]: renamed network interface wlan0 to wlan2
[    9.661328] hda_codec: ALC883: BIOS auto-probing.
[    9.662291] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[   11.096302] Adding 5855228k swap on /dev/sda2.  Priority:-1 extents:1 across:5855228k 
[   11.100734] EXT4-fs (sda3): re-mounted. Opts: (null)
[   11.542026] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   11.726121] loop: module loaded
[   12.859418] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   12.938550] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   13.833050] fuse init (API version 7.16)
[   14.999065] Disabling lock debugging due to kernel taint
[   15.048784] vboxdrv: Found 2 processor cores.
[   15.049058] vboxdrv: fAsync=0 offMin=0x302 offMax=0xa32
[   15.049116] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   15.049119] vboxdrv: Successfully loaded version 4.0.8_Debian (interface 0x00180000).
[   15.618390] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[   17.911125] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.322714] apm: BIOS not found.
[   34.157312] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0
[   34.344242] EXT4-fs (sda5): re-mounted. Opts: commit=0
[   34.624054] EXT4-fs (sda6): re-mounted. Opts: commit=0
[  102.444823] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex
[  102.444831] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
[  102.445210] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  112.808038] eth0: no IPv6 routers present
[  196.912052] CE: hpet increased min_delta_ns to 20113 nsec
[  437.783190] process `skype' is using obsolete setsockopt SO_BSDCOMPAT

** Model information
not available

** Loaded modules:
Module                  Size  Used by
acpi_cpufreq           12737  1 
mperf                  12387  1 acpi_cpufreq
cpufreq_powersave      12422  0 
cpufreq_stats          12670  0 
cpufreq_conservative    12987  0 
cpufreq_userspace      12520  0 
vboxnetadp             13146  0 
vboxnetflt             23683  0 
vboxdrv               154090  2 vboxnetadp,vboxnetflt
binfmt_misc            12778  1 
uinput                 12984  1 
fuse                   55666  1 
loop                   17777  0 
firewire_sbp2          17514  0 
snd_hda_codec_realtek   207702  1 
arc4                   12418  2 
ecb                    12649  2 
rt61pci                22168  0 
rt2x00pci              12683  1 rt61pci
rt2x00lib              28634  2 rt61pci,rt2x00pci
mac80211              164606  2 rt2x00pci,rt2x00lib
cfg80211              107076  2 rt2x00lib,mac80211
eeprom_93cx6           12423  1 rt61pci
gspca_vc032x           29935  0 
gspca_main             22289  1 gspca_vc032x
videodev               61226  1 gspca_main
media                  13692  1 videodev
snd_hda_intel          21529  0 
i915                  286502  2 
snd_hda_codec          57741  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              12906  1 snd_hda_codec
snd_pcm                52731  2 snd_hda_intel,snd_hda_codec
drm_kms_helper         26550  1 i915
pcmcia                 32024  0 
snd_seq                39172  0 
snd_timer              22171  2 snd_pcm,snd_seq
snd_seq_device         12995  1 snd_seq
drm                   129190  3 i915,drm_kms_helper
joydev                 16906  0 
snd                    38189  8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore              12878  1 snd
acer_wmi               17475  0 
i2c_i801               12670  0 
sparse_keymap          12680  1 acer_wmi
rfkill                 18510  2 cfg80211,acer_wmi
yenta_socket           22152  0 
tifm_7xx1              12762  0 
i2c_algo_bit           12706  1 i915
pcmcia_rsrc            17314  1 yenta_socket
rng_core               12550  0 
pcmcia_core            17973  3 pcmcia,yenta_socket,pcmcia_rsrc
i2c_core               19022  6 videodev,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
evdev                  13084  20 
tifm_core              13098  1 tifm_7xx1
pcspkr                 12515  0 
psmouse                45863  0 
serio_raw              12758  0 
ac                     12552  0 
wmi                    13018  1 acer_wmi
snd_page_alloc         12841  2 snd_hda_intel,snd_pcm
battery                12957  0 
power_supply           13283  2 ac,battery
button                 12783  1 i915
video                  17345  1 i915
container              12525  0 
shpchp                 26653  0 
pci_hotplug            26303  1 shpchp
processor              26983  3 acpi_cpufreq
ext4                  270998  3 
mbcache                12810  1 ext4
jbd2                   55701  1 ext4
crc16                  12327  1 ext4
hid_microsoft          12497  0 
usbhid                 35206  0 
hid                    59841  2 hid_microsoft,usbhid
sd_mod                 35060  5 
crc_t10dif             12332  1 sd_mod
ata_generic            12439  0 
ata_piix               21079  4 
tg3                   103807  0 
uhci_hcd               21850  0 
libata                132100  2 ata_generic,ata_piix
ehci_hcd               34885  0 
thermal                13058  0 
scsi_mod              134453  3 firewire_sbp2,sd_mod,libata
firewire_ohci          26332  0 
usbcore                99225  6 gspca_vc032x,gspca_main,usbhid,uhci_hcd,ehci_hcd
thermal_sys            17667  3 video,processor,thermal
firewire_core          42365  2 firewire_sbp2,firewire_ohci
libphy                 18279  1 tg3
crc_itu_t              12331  2 rt61pci,firewire_core

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether 00:16:36:31:99:8d brd ff:ff:ff:ff:ff:ff
    inet 192.168.11.106/24 brd 192.168.11.255 scope global eth0
    inet6 fe80::216:36ff:fe31:998d/64 scope link 
       valid_lft forever preferred_lft forever
3: wlan2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether f0:7d:68:5d:67:48 brd ff:ff:ff:ff:ff:ff
4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:  287275     207    0    0    0     0          0         0   287275     207    0    0    0     0       0          0
  eth0: 1101892    1673    0    0    0     0          0         0   213505    1633    0    0    0     0       0          0
 wlan2:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
vboxnet0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    1875 total packets received
    1 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    1874 incoming packets delivered
    1818 requests sent out
Icmp:
    73 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 73
    8 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 8
IcmpMsg:
        InType3: 73
        OutType3: 8
Tcp:
    38 active connections openings
    3 passive connection openings
    0 failed connection attempts
    0 connection resets received
    16 connections established
    1442 segments received
    1346 segments send out
    2 segments retransmited
    0 bad segments received.
    0 resets sent
Udp:
    350 packets received
    8 packets to unknown port received.
    0 packet receive errors
    460 packets sent
UdpLite:
TcpExt:
    17 TCP sockets finished time wait in fast timer
    99 delayed acks sent
    Quick ack mode was activated 2 times
    740 packet headers predicted
    137 acknowledgments not containing data payload received
    226 predicted acknowledgments
    2 congestion windows recovered without slow start after partial ack
    2 other TCP timeouts
    2 DSACKs sent for old packets
    2 DSACKs received
    TCPDSACKIgnoredNoUndo: 2
IpExt:
    InMcastPkts: 9
    OutMcastPkts: 17
    InOctets: 1361589
    OutOctets: 467152
    InMcastOctets: 3198
    OutMcastOctets: 4241

*** Device features:
eth0: 0x149a3
lo: 0x201b7c65
vboxnet0: 0x4000
wlan2: 0x6000

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d0300000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at 1800 [size=8]
	Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at d0400000 (32-bit, non-prefetchable) [size=256K]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at d0380000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at d0440000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00006000-00006fff
	Memory behind bridge: d0d00000-d0efffff
	Prefetchable memory behind bridge: 00000000d0f00000-00000000d10fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: d0000000-d01fffff
	Prefetchable memory behind bridge: 00000000d0b00000-00000000d0cfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: d0700000-d08fffff
	Prefetchable memory behind bridge: 00000000d0900000-00000000d0afffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f0000000-f5ffffff
	Prefetchable memory behind bridge: 00000000d4000000-00000000d7ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at 1820 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 1840 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 1860 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at 1880 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at d0644000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=56
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: d0200000-d02fffff
	Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 18b0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 18c0 [size=32]
	Kernel driver in use: i801_smbus

03:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express [14e4:169d] (rev 11)
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: tg3

05:00.0 PCI bridge [0604]: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A [8086:032c] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=05, secondary=06, subordinate=0a, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f0000000-f5ffffff
	Prefetchable memory behind bridge: 00000000d4000000-00000000d7ffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

06:02.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 4: I/O ports at 2840 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

06:02.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 16
	Region 4: I/O ports at 2860 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

06:02.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) (prog-if 20 [EHCI])
	Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 17
	Region 0: Memory at f4005800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

06:03.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 4: I/O ports at 2880 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

06:03.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 28a0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

06:03.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) (prog-if 20 [EHCI])
	Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 16
	Region 0: Memory at f4005900 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

06:04.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
	Subsystem: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at f4005000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci

06:05.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] (rev 02)
	Subsystem: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f4004000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
	Memory window 0: d4000000-d7fff000 (prefetchable)
	Memory window 1: f0000000-f3fff000
	I/O window 0: 00002000-000020ff
	I/O window 1: 00002400-000024ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus

06:06.0 Modem [0703]: Realtek Semiconductor Co., Ltd. SmartLAN56 56K Modem [10ec:8197] (prog-if 00 [Generic])
	Subsystem: AMBIT Microsystem Corp. Device [1468:3006]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at 2800 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: serial

0a:09.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176
	Memory window 0: d8000000-dbfff000 (prefetchable)
	Memory window 1: dc000000-dffff000
	I/O window 0: 00003000-000030ff
	I/O window 1: 00003400-000034ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus

0a:09.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (750ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at d0206000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci

0a:09.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
	Subsystem: Acer Incorporated [ALI] Device [1025:0098]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at d0205000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: tifm_7xx1

0b:00.0 Network controller [0280]: Ralink corp. RT2561/RT61 rev B 802.11g [1814:0302]
	Subsystem: D-Link System Inc AirPlus G DWL-G630 Wireless Cardbus Adapter (rev.E2) [1186:3c08]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: rt61pci


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:0892 Logitech, Inc. OrbiCam
Bus 009 Device 002: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 009 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing-proposed-updates
  APT policy: (500, 'testing-proposed-updates'), (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.39-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.39-2-686-pae depends on:
ii  debconf [debconf-2.0]         1.5.40     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.99       tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.16-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.39-2-686-pae recommends:
pn  firmware-linux-free           <none>     (no description available)
ii  libc6-i686                    2.13-7     Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.39-2-686-pae suggests:
ii  grub-pc                       1.99-6     GRand Unified Bootloader, version 
pn  linux-doc-2.6.39              <none>     (no description available)

Versions of packages linux-image-2.6.39-2-686-pae is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
ii  firmware-ralink               0.30       Binary firmware for Ralink wireles
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.39-2-686-pae/postinst/ignoring-ramdisk:
* linux-image-2.6.39-2-686-pae/postinst/missing-firmware-2.6.39-2-686-pae:
  linux-image-2.6.39-2-686-pae/postinst/depmod-error-initrd-2.6.39-2-686-pae: false
  linux-image-2.6.39-2-686-pae/prerm/removing-running-kernel-2.6.39-2-686-pae: true



--- End Message ---
--- Begin Message --- after upgrading to NetworkManager 0.9.0 and enabling "enable wireless" in nm-applet's context menu (i did that before too, i swear!) the wireless card is working again.
kernel version as shown by uname -a is: 3.0.0-1-686-pae

happy 3.0!
hannes


On 07/13/2011 01:54 PM, Debian Bug Tracking System wrote:
Thank you for filing a new Bug report with Debian.

This is an automatically generated reply to let you know your message
has been received.

Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.

As you requested using X-Debbugs-CC, your message was also forwarded to
   raggam-nl@adm.at
(after having been given a Bug report number, if it did not have one).

Your message has been sent to the package maintainer(s):
  Debian Kernel Team<debian-kernel@lists.debian.org>

If you wish to submit further information on this problem, please
send it to 633747@bugs.debian.org.

Please do not send mail to owner@bugs.debian.org unless you wish
to report a problem with the Bug-tracking system.



--
johannes raggam / thet,thetet
python plone zope development
mailto: johannes@raggam.co.at
web:  http://bluedynamics.com



--- End Message ---

Reply to: