Package: linux-2.6 Version: 3.0.0-3 Severity: normal Dear Maintainer, After upgrading to testing, some X11 apps, notably Iceweasel, started to present font rendering errors (characters missing parts). This same problem has been reported in Ubuntu [1]. It turns out that when booting with stable's kernel (linux-image-2.6.32-5-686) the problem vanishes. I have caught this message in one occasion; I don't know if it is related: Sep 14 20:18:48 huanghomatic kernel: [ 113.014194] [drm] capturing error event; look for more information in /de bug/dri/0/i915_error_state Sep 14 20:18:48 huanghomatic kernel: [ 113.015532] render error detected, EIR: 0x00000010 Sep 14 20:18:48 huanghomatic kernel: [ 113.016917] page table error Sep 14 20:18:48 huanghomatic kernel: [ 113.017214] PGTBL_ER: 0x00000100 Sep 14 20:18:48 huanghomatic kernel: [ 113.017214] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010 , masking Sep 14 20:18:48 huanghomatic kernel: [ 113.017214] render error detected, EIR: 0x00000010 Sep 14 20:18:48 huanghomatic kernel: [ 113.017214] page table error Sep 14 20:18:48 huanghomatic kernel: [ 113.017214] PGTBL_ER: 0x00000100 I haven't been able to cause it again, so couldn't get the content of the mentioned file in /sys/kernel/debug. I'm sending a screenshot of an affected screen attached. In this instance, the 'h' character is misrendered, but it varies from execution to execution. I'm running on an Eee PC 900, it this helps. Thanks in advance! [1] http://www.ubuntuforums.org/showthread.php?t=1678008 -- Package-specific info: ** Version: Linux version 3.0.0-1-686-pae (Debian 3.0.0-3) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 16:41:03 UTC 2011 ** Command line: root=/dev/sda1 quiet ** Not tainted ** Kernel log: [ 2.006170] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.011234] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.011462] sd 1:0:1:0: Attached scsi generic sg1 type 0 [ 2.123348] usb 1-5: New USB device found, idVendor=0951, idProduct=1606 [ 2.123358] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4 [ 2.123365] usb 1-5: Product: UB6225 [ 2.123370] usb 1-5: Manufacturer: ENE [ 2.123375] usb 1-5: SerialNumber: 146030377350 [ 2.139438] usbcore: registered new interface driver uas [ 2.143910] Initializing USB Mass Storage driver... [ 2.144345] scsi2 : usb-storage 1-5:1.0 [ 2.144892] usbcore: registered new interface driver usb-storage [ 2.144898] USB Mass Storage support registered. [ 2.236045] usb 1-8: new high speed USB device number 3 using ehci_hcd [ 2.299165] PM: Starting manual resume from disk [ 2.299176] PM: Hibernation image partition 8:2 present [ 2.299180] PM: Looking for hibernation image. [ 2.299821] PM: Image not found (code -22) [ 2.299827] PM: Hibernation image not present or could not be loaded. [ 2.314019] EXT3-fs: barriers not enabled [ 2.314542] kjournald starting. Commit interval 5 seconds [ 2.314630] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 2.412840] usb 1-8: New USB device found, idVendor=04f2, idProduct=b071 [ 2.412850] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.412856] usb 1-8: Product: CNF7129 [ 2.412861] usb 1-8: Manufacturer: Chicony Electronics Co., Ltd. [ 2.412867] usb 1-8: SerialNumber: SN0001 [ 2.748823] udevd[239]: starting version 172 [ 2.935753] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1 [ 2.935769] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3.002054] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 3.010267] ACPI: Lid Switch [LID] [ 3.010450] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 3.010463] ACPI: Sleep Button [SLPB] [ 3.010651] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 3.010661] ACPI: Power Button [PWRB] [ 3.010798] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 3.010807] ACPI: Power Button [PWRF] [ 3.044078] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.052409] ACPI: acpi_idle registered with cpuidle [ 3.052853] Marking TSC unstable due to TSC halts in idle [ 3.065091] Switching to clocksource hpet [ 3.112863] eeepc_laptop: Eee PC Hotkey Driver [ 3.112885] eeepc_laptop: Hotkey init flags 0x41 [ 3.116478] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway [ 3.116490] eeepc_laptop: Get control methods supported: 0x2101711 [ 3.119309] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6 [ 3.168095] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0 [ 3.169222] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.170634] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 3.188464] [drm] Initialized drm 1.1.0 20060810 [ 3.212727] ACPI: AC Adapter [AC0] (off-line) [ 3.345335] Linux media interface: v0.10 [ 3.742437] eeepc_laptop: BIOS says wireless lan is blocked, but the pci device is present [ 3.742445] eeepc_laptop: skipped wireless hotplug as probably inappropriate for this model [ 3.743083] eeepc_laptop: Unable to find port [ 4.471776] ACPI: Battery Slot [BAT0] (battery present) [ 4.478831] intel_rng: FWH not detected [ 4.498534] Linux video capture interface: v2.00 [ 4.514881] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071) [ 4.535925] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.535938] i915 0000:00:02.0: setting latency timer to 64 [ 4.538764] input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7 [ 4.538908] usbcore: registered new interface driver uvcvideo [ 4.538913] USB Video Class driver (v1.1.0) [ 4.553838] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.553846] [drm] Driver supports precise vblank timestamp query. [ 4.554637] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.868396] [drm] initialized overlay support [ 5.114036] fbcon: inteldrmfb (fb0) is primary device [ 5.119216] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync) [ 5.120785] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input8 [ 5.162546] Console: switching to colour frame buffer device 128x37 [ 5.168430] fb0: inteldrmfb frame buffer device [ 5.168435] drm: registered panic notifier [ 5.168529] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 5.168625] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.168723] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 5.168777] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.211682] hda_codec: ALC662 rev1: BIOS auto-probing. [ 5.212809] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 5.215797] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.216230] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 6.032242] Adding 521212k swap on /dev/sda2. Priority:-1 extents:1 across:521212k [ 6.042769] EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended [ 6.049509] EXT3-fs (sda1): using internal journal [ 6.145862] loop: module loaded [ 6.697640] EXT3-fs: barriers not enabled [ 6.698183] kjournald starting. Commit interval 5 seconds [ 6.698231] EXT3-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended [ 6.699622] EXT3-fs (sdb1): using internal journal [ 6.699632] EXT3-fs (sdb1): mounted filesystem with ordered data mode [ 7.208970] pciehp: Unknown parameter `pciehp_slot_with_bus' [ 7.377698] fuse init (API version 7.16) [ 7.634666] atl2 0000:03:00.0: irq 44 for MSI/MSI-X [ 7.635162] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.840558] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 7.840940] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.131479] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 18.848025] eth0: no IPv6 routers present ** Model information not available ** Loaded modules: Module Size Used by mperf 12421 0 cpufreq_conservative 12987 0 cpufreq_userspace 12520 0 cpufreq_powersave 12422 0 cpufreq_stats 12758 0 uinput 12953 1 fuse 56331 1 loop 17866 0 snd_hda_codec_realtek 206339 1 snd_hda_intel 21691 0 snd_hda_codec 58364 2 snd_hda_codec_realtek,snd_hda_intel i915 294451 2 psmouse 46216 0 uvcvideo 56927 0 snd_hwdep 12936 1 snd_hda_codec snd_pcm 53315 2 snd_hda_intel,snd_hda_codec videodev 61530 1 uvcvideo drm_kms_helper 22688 1 i915 evdev 12995 17 media 13692 2 uvcvideo,videodev serio_raw 12734 0 rng_core 12616 0 drm 129847 3 i915,drm_kms_helper snd_seq 39539 0 battery 12957 0 ac 12552 0 snd_timer 22027 2 snd_pcm,snd_seq snd_seq_device 12985 1 snd_seq eeepc_laptop 18249 0 power_supply 13283 2 battery,ac sparse_keymap 12707 1 eeepc_laptop snd 38562 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device rfkill 18522 1 eeepc_laptop i2c_algo_bit 12722 1 i915 pci_hotplug 26736 1 eeepc_laptop processor 27382 1 button 12810 1 i915 soundcore 12992 1 snd snd_page_alloc 12899 2 snd_hda_intel,snd_pcm i2c_core 19141 5 i915,videodev,drm_kms_helper,drm,i2c_algo_bit video 17475 1 i915 ext3 99597 2 jbd 42027 1 ext3 mbcache 12898 1 ext3 usb_storage 35164 0 uas 13099 0 sg 21564 0 sd_mod 35493 5 crc_t10dif 12332 1 sd_mod ata_generic 12439 0 ata_piix 21110 3 ahci 20897 0 libahci 18231 1 ahci libata 133339 4 ata_generic,ata_piix,ahci,libahci scsi_mod 135178 5 usb_storage,uas,sg,sd_mod,libata uhci_hcd 22275 0 ehci_hcd 35401 0 usbcore 104234 6 uvcvideo,usb_storage,uas,uhci_hcd,ehci_hcd thermal 13138 0 thermal_sys 17677 3 processor,video,thermal atl2 26475 0 ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 10.1.1.7 netmask 255.255.255.0 network 10.1.1.0 broadcast 10.1.1.255 gateway 10.1.1.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 10.1.1.1 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:22:15:04:ba:37 brd ff:ff:ff:ff:ff:ff inet 10.1.1.7/24 brd 10.1.1.255 scope global eth0 inet6 fe80::222:15ff:fe04:ba37/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 1796294 2089 0 0 0 0 0 0 390897 2152 0 0 0 0 1 0 *** Protocol statistics: Ip: 2072 total packets received 0 forwarded 0 incoming packets discarded 2072 incoming packets delivered 2129 requests sent out Icmp: 10 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 10 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: IcmpMsg: InType3: 10 Tcp: 100 active connections openings 0 passive connection openings 0 failed connection attempts 2 connection resets received 31 connections established 1862 segments received 1899 segments send out 26 segments retransmited 0 bad segments received. 35 resets sent Udp: 200 packets received 0 packets to unknown port received. 0 packet receive errors 204 packets sent UdpLite: TcpExt: 31 TCP sockets finished time wait in fast timer 56 delayed acks sent Quick ack mode was activated 9 times 1047 packet headers predicted 233 acknowledgments not containing data payload received 52 predicted acknowledgments 20 retransmits in slow start 6 other TCP timeouts 9 DSACKs sent for old packets 1 DSACKs received 2 connections reset due to unexpected data 1 connections reset due to early user close TCPDSACKIgnoredOld: 1 TCPSackShiftFallback: 2 IpExt: OutMcastPkts: 2 InOctets: 1766266 OutOctets: 359909 OutMcastOctets: 321 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at ec00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:8337] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 3fb00000-3fcfffff Prefetchable memory behind bridge: 000000003fd00000-000000003fefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 000000003f900000-000000003fafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f8000000-fbefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at e400 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e480 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e800 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at e880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 0 Region 4: I/O ports at 0400 [size=32] 03:00.0 Ethernet controller [0200]: Atheros Communications L2 Fast Ethernet [1969:2048] (rev a0) Subsystem: ASUSTeK Computer Inc. Device [1043:8233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fbfa0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl2 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0951:1606 Kingston Technology Bus 001 Device 003: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129 -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 3.0.0-1-686-pae (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.0.0-1-686-pae depends on: ii debconf [debconf-2.0] 1.5.40 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.3 ii module-init-tools 3.16-1 Versions of packages linux-image-3.0.0-1-686-pae recommends: ii firmware-linux-free 3 ii libc6-i686 2.13-18 Versions of packages linux-image-3.0.0-1-686-pae suggests: pn grub-pc | extlinux | lilo <none> pn linux-doc-3.0.0 <none> Versions of packages linux-image-3.0.0-1-686-pae is related to: pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.0.0-1-686-pae/prerm/removing-running-kernel-3.0.0-1-686-pae: true linux-image-3.0.0-1-686-pae/postinst/ignoring-ramdisk: linux-image-3.0.0-1-686-pae/postinst/missing-firmware-3.0.0-1-686-pae: linux-image-3.0.0-1-686-pae/postinst/depmod-error-initrd-3.0.0-1-686-pae: false
Attachment:
linux-3.0.0-i915-rendering-error.png
Description: PNG image