Bug#641198: linux-image-2.6.32: After yesterday's update including kernel update and firmware-linux update the sound doesn't work any more. Model: "Intel 82801I (ICH9 Family) HD Audio Controller"
Package: linux-2.6
Version: 2.6.32-35squeeze1
Severity: important
File: linux-image-2.6.32
Sound card doesn't appear in KDE systemsettings multimedia. Sound is okay in Win7 and Ubuntu installation on the same laptop. Sound had been okay until
yesterday's upate, see synaptic's log in attachement
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-35squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Aug 26 09:15:47 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=5c32562f-c6fa-4c0a-87d0-ff3a9c5a3b66 ro quiet
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 65.380464] generic-usb 0003:045E:0737.0003: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1a.1-1/input0
[ 125.392573] usb 4-1: USB disconnect, address 3
[ 127.120059] usb 4-1: new low speed USB device using uhci_hcd and address 4
[ 127.297136] usb 4-1: New USB device found, idVendor=045e, idProduct=0737
[ 127.297140] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 127.297142] usb 4-1: Product: Compact Optical Mouse 500
[ 127.297144] usb 4-1: Manufacturer: Microsoft
[ 127.297234] usb 4-1: configuration #1 chosen from 1 choice
[ 127.324383] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input15
[ 127.324475] generic-usb 0003:045E:0737.0004: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1a.1-1/input0
[ 160.024106] EXT3 FS on sda7, internal journal
[ 160.136472] loop: module loaded
[ 162.709531] fuse init (API version 7.13)
[ 163.524130] kjournald starting. Commit interval 5 seconds
[ 163.524388] EXT3 FS on sda8, internal journal
[ 163.524392] EXT3-fs: mounted filesystem with ordered data mode.
[ 163.816442] kjournald starting. Commit interval 5 seconds
[ 163.816457] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 163.816707] EXT3 FS on sda11, internal journal
[ 163.816713] EXT3-fs: mounted filesystem with ordered data mode.
[ 163.898142] kjournald starting. Commit interval 5 seconds
[ 163.898158] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 163.898385] EXT3 FS on sda12, internal journal
[ 163.898388] EXT3-fs: mounted filesystem with ordered data mode.
[ 163.988014] kjournald starting. Commit interval 5 seconds
[ 163.988023] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 163.988250] EXT3 FS on sda13, internal journal
[ 163.988254] EXT3-fs: mounted filesystem with ordered data mode.
[ 164.083638] kjournald starting. Commit interval 5 seconds
[ 164.083652] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 164.083889] EXT3 FS on sda15, internal journal
[ 164.083892] EXT3-fs: mounted filesystem with ordered data mode.
[ 164.142051] kjournald starting. Commit interval 5 seconds
[ 164.142067] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 164.142644] EXT3 FS on sda17, internal journal
[ 164.142647] EXT3-fs: recovery complete.
[ 164.142650] EXT3-fs: mounted filesystem with ordered data mode.
[ 164.188307] kjournald starting. Commit interval 5 seconds
[ 164.188560] EXT3 FS on sda18, internal journal
[ 164.188564] EXT3-fs: mounted filesystem with ordered data mode.
[ 165.132695] r8169: eth0: link up
[ 165.132701] r8169: eth0: link up
[ 175.644054] eth0: no IPv6 routers present
[ 176.861639] device-mapper: uevent: version 1.0.3
[ 176.861936] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 176.940997] padlock: VIA PadLock not detected.
[ 177.212310] kjournald starting. Commit interval 5 seconds
[ 177.212325] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 177.216253] EXT3 FS on dm-0, internal journal
[ 177.216257] EXT3-fs: mounted filesystem with ordered data mode.
[ 178.354634] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input16
[ 178.811339] vboxdrv: Found 2 processor cores.
[ 178.811432] vboxdrv: fAsync=0 offMin=0x1a4 offMax=0x95a
[ 178.811476] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 178.811478] vboxdrv: Successfully loaded version 4.1.2 (interface 0x00190000).
[ 179.041380] vboxpci: IOMMU not found (not compiled)
[ 180.182927] apm: BIOS not found.
[ 184.353696] lp: driver loaded but no devices found
[ 184.388628] ppdev: user-space parallel port driver
[ 211.345709] CPU0 attaching NULL sched-domain.
[ 211.345714] CPU1 attaching NULL sched-domain.
[ 211.368082] CPU0 attaching sched-domain:
[ 211.368085] domain 0: span 0-1 level MC
[ 211.368087] groups: 0 1
[ 211.368091] CPU1 attaching sched-domain:
[ 211.368093] domain 0: span 0-1 level MC
[ 211.368095] groups: 1 0
[ 813.283878] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 813.356191] CPU0 attaching NULL sched-domain.
[ 813.356196] CPU1 attaching NULL sched-domain.
[ 813.384110] CPU0 attaching sched-domain:
[ 813.384115] domain 0: span 0-1 level MC
[ 813.384119] groups: 0 1
[ 813.384126] CPU1 attaching sched-domain:
[ 813.384129] domain 0: span 0-1 level MC
[ 813.384133] groups: 1 0
[ 826.426324] CPU0 attaching NULL sched-domain.
[ 826.426329] CPU1 attaching NULL sched-domain.
[ 826.452597] CPU0 attaching sched-domain:
[ 826.452601] domain 0: span 0-1 level MC
[ 826.452605] groups: 0 1
[ 826.452613] CPU1 attaching sched-domain:
[ 826.452616] domain 0: span 0-1 level MC
[ 826.452620] groups: 1 0
[ 917.988865] CPU0 attaching NULL sched-domain.
[ 917.988870] CPU1 attaching NULL sched-domain.
[ 918.012083] CPU0 attaching sched-domain:
[ 918.012086] domain 0: span 0-1 level MC
[ 918.012088] groups: 0 1
[ 918.012093] CPU1 attaching sched-domain:
[ 918.012094] domain 0: span 0-1 level MC
[ 918.012097] groups: 1 0
[ 1139.506275] CPU0 attaching NULL sched-domain.
[ 1139.506280] CPU1 attaching NULL sched-domain.
[ 1139.616091] CPU0 attaching sched-domain:
[ 1139.616094] domain 0: span 0-1 level MC
[ 1139.616097] groups: 0 1
[ 1139.616101] CPU1 attaching sched-domain:
[ 1139.616103] domain 0: span 0-1 level MC
[ 1139.616105] groups: 1 0
** Model information
not available
** Loaded modules:
Module Size Used by
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
acpi_cpufreq 4915 0
cpufreq_conservative 4018 2
cpufreq_powersave 602 0
cpufreq_userspace 1444 0
cpufreq_stats 1940 0
pci_stub 889 1
vboxpci 11533 0
vboxnetadp 5595 0
vboxnetflt 13837 0
vboxdrv 163405 3 vboxpci,vboxnetadp,vboxnetflt
binfmt_misc 4875 1
uinput 4796 1
aes_i586 6816 2
aes_generic 25738 1 aes_i586
xts 1701 1
gf128mul 5106 1 xts
dm_crypt 9196 1
dm_mod 45842 3 dm_crypt
fuse 44052 13
loop 9729 0
snd_hda_codec_nvhdmi 2567 1
snd_hda_codec_idt 35329 1
snd_hda_intel 16791 2
snd_hda_codec 46002 3 snd_hda_codec_nvhdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47226 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12513 1 snd_seq_midi
arc4 974 2
snd_seq_midi_event 3684 1 snd_seq_midi
ecb 1405 2
uvcvideo 45526 0
snd_seq 35327 2 snd_seq_midi,snd_seq_midi_event
videodev 25445 1 uvcvideo
usblp 7863 0
v4l1_compat 10250 2 uvcvideo,videodev
snd_timer 12258 2 snd_pcm,snd_seq
ath9k 238205 0
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
mac80211 122866 1 ath9k
ath 5986 1 ath9k
cfg80211 86957 3 ath9k,mac80211,ath
joydev 6739 0
snd 34387 15 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_i801 6462 0
rfkill 10196 1 cfg80211
video 14605 0
nvidia 9522711 33
ac 1640 0
battery 3782 0
processor 26259 3 acpi_cpufreq
soundcore 3450 1 snd
i2c_core 12751 3 videodev,i2c_i801,nvidia
led_class 1757 1 ath9k
psmouse 44777 0
button 3598 0
snd_page_alloc 4977 2 snd_hda_intel,snd_pcm
wmi 3575 0
evdev 5609 28
serio_raw 2916 0
pcspkr 1207 0
output 1204 1 video
ext3 93944 9
jbd 31965 1 ext3
mbcache 3762 1 ext3
sg 19905 0
sr_mod 10770 0
usbhid 27872 0
hid 50841 1 usbhid
cdrom 26487 1 sr_mod
sd_mod 25937 16
crc_t10dif 1012 1 sd_mod
uhci_hcd 15989 0
ahci 27378 15
libata 115617 1 ahci
r8169 25126 0
mii 2714 1 r8169
scsi_mod 104593 4 sg,sr_mod,sd_mod,libata
ehci_hcd 28453 0
thermal 9206 0
thermal_sys 9378 3 video,processor,thermal
usbcore 98613 6 uvcvideo,usblp,usbhid,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo eth0
iface lo inet loopback
#iface eth0 inet static
# address 192.168.1.7
# netmask 255.255.255.0
# network 192.168.1.0
# broadcast 192.168.1.255
# gateway 192.168.1.15
# dns-nameservers 192.168.1.15
iface eth0 inet static
address 192.168.20.5
netmask 255.255.255.0
gateway 192.168.20.1
dns-nameservers 8.8.8.8
#iface eth0 inet static
# address 192.168.30.5
# netmask 255.255.255.0
# network 192.168.30.0
# gateway 192.168.30.1
# dns-nameservers 149.250.229.230
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:26:9e:36:b9:b2 brd ff:ff:ff:ff:ff:ff
inet 192.168.20.5/24 brd 192.168.20.255 scope global eth0
inet6 fe80::226:9eff:fe36:b9b2/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0c:60:76:56:c5:ae brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 22368 372 0 0 0 0 0 0 22368 372 0 0 0 0 0 0
eth0:12284794 10346 0 0 0 0 0 0 865034 8417 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
10754 total packets received
0 forwarded
0 incoming packets discarded
10754 incoming packets delivered
8661 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
324 active connections openings
24 passive connection openings
66 failed connection attempts
4 connection resets received
0 connections established
9706 segments received
7325 segments send out
15 segments retransmited
0 bad segments received.
146 resets sent
Udp:
1053 packets received
0 packets to unknown port received.
0 packet receive errors
1325 packets sent
UdpLite:
TcpExt:
126 TCP sockets finished time wait in fast timer
252 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 5 times
7363 packet headers predicted
480 acknowledgments not containing data payload received
30 predicted acknowledgments
5 congestion windows recovered without slow start after partial ack
15 other TCP timeouts
5 DSACKs sent for old packets
3 DSACKs received
3 connections reset due to unexpected data
4 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 1
IpExt:
InMcastPkts: 79
OutMcastPkts: 81
InOctets: 12170952
OutOctets: 755888
InMcastOctets: 10756
OutMcastOctets: 10836
*** Device features:
eth0: 0x180
lo: 0x13865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0000000-d2ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 50e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 50c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at d7005c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d7000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d6000000-d6ffffff
Prefetchable memory behind bridge: 00000000d3000000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d5000000-d5ffffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d4ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 50a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 5080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 5060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 5040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d7005800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 28
Region 0: I/O ports at 5108 [size=8]
Region 1: I/O ports at 5114 [size=4]
Region 2: I/O ports at 5100 [size=8]
Region 3: I/O ports at 5110 [size=4]
Region 4: I/O ports at 5020 [size=32]
Region 5: Memory at d7005000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d7006000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 5000 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at d7004000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:00.0 VGA compatible controller [0300]: nVidia Corporation G98M [GeForce G 103M] [10de:06ef] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 4000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: nvidia
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3040]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d6000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at d4010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d4000000 (64-bit, prefetchable) [size=64K]
Expansion ROM at d4020000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 004: ID 045e:0737 Microsoft Corp. Compact Optical Mouse 500
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 5986:01c4 Acer, Inc
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 001 Device 004: ID 1a86:7584 QinHeng Electronics CH340S
Bus 001 Device 003: ID 0a05:7220
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.2
APT prefers proposed-updates
APT policy: (500, 'proposed-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-35squeeze1 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-35squeeze1 Binary firmware for various driver
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Reply to: