--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: [xserver-xorg-video-intel] when using KMS, X puts the monitor directly into power saving mode upon startup[945G]
- From: Joe Neal <vlvtelvis@speakeasy.net>
- Date: Tue, 26 Jan 2010 13:51:38 -0600
- Message-id: <201001261351.38417.vlvtelvis@speakeasy.net>
Package: xserver-xorg-video-intel
Version: 2:2.9.1-2
Severity: important
--- Please enter the report below this line. ---
When X starts the monitor immediately flashes that it is going into power
saving mode, before a display manager has a chance to start. It wakes upon
entering ctl-alt-F1 through ctl-alt-F6 but returns to power saving mode with
control-alt-F7.
Top, etc indicates that X is in fact running.
Disabling KMS solves the problem
Attached is a log from one of the failed X startup attempts rather than the
most recent successful one without KMS.
If any further info is needed, let me know.
--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.32-trunk-amd64
Debian Release: squeeze/sid
500 unstable mirror.csclub.uwaterloo.ca
500 unstable http.us.debian.org
--- Package information. ---
Depends (Version) | Installed
============================================-+-=======================
libc6 (>= 2.2.5) | 2.10.2-5
libdrm-intel1 (>= 2.4.11) | 2.4.15-1
libdrm2 (>= 2.4.3) | 2.4.15-1
libpciaccess0 (>= 0.8.0+git20071002) | 0.11.0-1
libxext6 (>= 0) | 2:1.1.1-2
libxfixes3 (>= 1:4.0.1) | 1:4.0.4-1
libxv1 | 2:1.0.5-1
libxvmc1 | 2:1.0.5-1
xserver-xorg-core (>= 2:1.6.99.900) | 2:1.7.4-2
Package's Recommends field is empty.
Package's Suggests field is empty.
-8<---8<---8<---8<---8<---8<---8<---8<---8<--
Please attach the file:
/tmp/reportbug-ng-xserver-xorg-video-intel-kPjrP7.txt
to the mail. I'd do it myself if the output wasn't too long to handle.
Thank you!
->8--->8--->8--->8--->8--->8--->8--->8--->8--
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian
Current Operating System: Linux bob 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64 root=UUID=a51880f6-1f94-46e5-b75a-aca17bfb77e2 ro quiet
Build Date: 20 January 2010 11:36:07PM
xorg-server 2:1.7.4-2 (buildd@brahms.debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 26 10:25:49 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "intel"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c1600
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2772:8086:4c43 Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xe0100000/524288, 0xd0000000/268435456, 0xe0180000/262144, I/O @ 0x000020e0/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945G
(--) intel(0): Chipset: "945G"
(II) intel(0): Output VGA1 using monitor section Configured Monitor
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: XXX Model: 1996 Serial#: 65740413
(II) intel(0): Year: 2005 Week: 20
(II) intel(0): EDID Version: 1.1
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 32 vert.: 25
(II) intel(0): Gamma: 2.60
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): redX: 0.625 redY: 0.340 greenX: 0.285 greenY: 0.605
(II) intel(0): blueX: 0.150 blueY: 0.065 whiteX: 0.269 whiteY: 0.290
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) intel(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) intel(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) intel(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) intel(0): Ranges: V min: 50 V max: 150 Hz, H min: 30 H max: 96 kHz, PixClock max 150 MHz
(II) intel(0): Monitor name: 1996F
(II) intel(0): Serial No: 3519465740413
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff00631896197d1eeb03
(II) intel(0): 140f0101682019a0e800bda057499b26
(II) intel(0): 10444aa443003159455961598199a940
(II) intel(0): a94f01010101000000fd0032961e600f
(II) intel(0): 000a202020202020000000fc00313939
(II) intel(0): 36460a20202020202020000000ff0033
(II) intel(0): 35313934363537343034313301010101
(II) intel(0): 0101010101010101010101010101000b
(II) intel(0): EDID vendor "XXX", prod id 6550
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1072 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output VGA1 connected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output VGA1 using initial mode 1024x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (320, 250) mm
(**) intel(0): DPI set to (81, 78)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(II) config/udev: Adding input device "Power Button" (/dev/input/event2)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event2"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event1)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event1"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Logitech Trackball" (/dev/input/event3)
(**) "Logitech Trackball": always reports core events
(**) "Logitech Trackball": Device: "/dev/input/event3"
(II) "Logitech Trackball": Found 3 mouse buttons
(II) "Logitech Trackball": Found scroll wheel(s)
(II) "Logitech Trackball": Found relative axes
(II) "Logitech Trackball": Found x and y relative axes
(II) "Logitech Trackball": Configuring as mouse
(**) "Logitech Trackball": YAxisMapping: buttons 4 and 5
(**) "Logitech Trackball": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech Trackball"" (type: MOUSE)
(**) "Logitech Trackball": (accel) keeping acceleration scheme 1
(**) "Logitech Trackball": (accel) acceleration profile 0
(II) "Logitech Trackball": initialized for relative axes.
(II) config/udev: Adding input device "Logitech Trackball" (/dev/input/mouse1)
(**) "Logitech Trackball": always reports core events
(**) "Logitech Trackball": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech Trackball""
(II) config/udev: Adding input device "Microsoft Comfort Curve Keyboard 2000" (/dev/input/event4)
(**) "Microsoft Comfort Curve Keyboard 2000": always reports core events
(**) "Microsoft Comfort Curve Keyboard 2000": Device: "/dev/input/event4"
(II) "Microsoft Comfort Curve Keyboard 2000": Found keys
(II) "Microsoft Comfort Curve Keyboard 2000": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Microsoft Comfort Curve Keyboard 2000"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Microsoft Comfort Curve Keyboard 2000" (/dev/input/event5)
(**) "Microsoft Comfort Curve Keyboard 2000": always reports core events
(**) "Microsoft Comfort Curve Keyboard 2000": Device: "/dev/input/event5"
(II) "Microsoft Comfort Curve Keyboard 2000": Found 1 mouse buttons
(II) "Microsoft Comfort Curve Keyboard 2000": Found scroll wheel(s)
(II) "Microsoft Comfort Curve Keyboard 2000": Found relative axes
(II) "Microsoft Comfort Curve Keyboard 2000": Found absolute axes
(II) "Microsoft Comfort Curve Keyboard 2000": Found keys
(II) "Microsoft Comfort Curve Keyboard 2000": Configuring as mouse
(II) "Microsoft Comfort Curve Keyboard 2000": Configuring as keyboard
(**) "Microsoft Comfort Curve Keyboard 2000": YAxisMapping: buttons 4 and 5
(**) "Microsoft Comfort Curve Keyboard 2000": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Microsoft Comfort Curve Keyboard 2000"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(EE) "Microsoft Comfort Curve Keyboard 2000": failed to initialize for relative axes.
(**) "Microsoft Comfort Curve Keyboard 2000": (accel) keeping acceleration scheme 1
(**) "Microsoft Comfort Curve Keyboard 2000": (accel) acceleration profile 0
(II) "Microsoft Comfort Curve Keyboard 2000": initialized for absolute axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "XXX", prod id 6550
(II) intel(0): DDCModeFromDetailedTiming: Ignoring tiny 1x1 mode
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Logitech Trackball": Device reopened after 1 attempts.
(II) "Microsoft Comfort Curve Keyboard 2000": Device reopened after 1 attempts.
(II) "Microsoft Comfort Curve Keyboard 2000": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
--- End Message ---