Bug#639122: linux-image-2.6.32-5-amd64: Kernel Oops when using WD SmartWare external USB HD
Package: linux-2.6
Version: 2.6.32-35
Severity: normal
Hi,
I have been using a Western Digital "SmartWare" external USB 2.0 HD to periodically backup some data to. I recently got a new computer and this is the first time i've used this drive with this computer.
The WD engineers have - through some kind of black magic ;) - added a CD-Rom drive to this external HD. It appears not to be on the actual disk, but probably on a flash chip:
mount
<snip>
/dev/sr1 on /media/WD SmartWare type udf (ro,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,iocharset=utf8,umask=0077)
<snip 3 more times>
/dev/sr5 on /media/WD SmartWare type udf (ro,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,iocharset=utf8,umask=0077)
/dev/sdc1 on /media/My Passport type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
fdisk -l /dev/sdc
Disk /dev/sdc: 319.4 GB, 319370035200 bytes
255 heads, 63 sectors/track, 38827 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00c32062
Device Boot Start End Blocks Id System
/dev/sdc1 1 38828 311884768 7 HPFS/NTFS
fdisk -l /dev/sr5
Note: sector size is 2048 (not 512)
Disk /dev/sr5: 700 MB, 700448768 bytes
255 heads, 63 sectors/track, 21 cylinders
Units = cylinders of 16065 * 2048 = 32901120 bytes
Sector size (logical/physical): 2048 bytes / 2048 bytes
I/O size (minimum/optimal): 2048 bytes / 2048 bytes
Disk identifier: 0x00000000
Disk /dev/sr5 doesn't contain a valid partition table
Newer drives from this series - we have some with USB 3.0 - appear not to be doing this anymore, they only have their drivers and software preinstalled on the disc.
Before, i had a Centos 5.5 on my old computer. On that computer, i could only write to the disk as root, but had but no oopses. A google search showed me that several other people had similar problems. On this computer i can write to it as a normal/unprivileged user without problems:
touch /media/My\ Passport/test
ls -l /media/My\ Passport/test
-rw------- 1 christoph christoph 0 24. Aug 12:15 /media/My Passport/test
Below i've attached the relevant piece of the dmesg output, as well as the output of lspci. During the day or so i've had the drive connected there were 5 oopses so far.
dmesg |grep "end trace a79" |wc -l
5
Which is probably also the reason for the five /dev/sr* devices.
Oops:
[98671.920013] usb 1-3: new high speed USB device using ehci_hcd and address 27
[98672.052893] usb 1-3: New USB device found, idVendor=0424, idProduct=2514
[98672.052897] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[98672.052988] usb 1-3: configuration #1 chosen from 1 choice
[98672.053170] hub 1-3:1.0: USB hub found
[98672.053264] hub 1-3:1.0: 3 ports detected
[98672.324146] usb 1-3.1: new high speed USB device using ehci_hcd and address 28
[98672.416893] usb 1-3.1: New USB device found, idVendor=0424, idProduct=2640
[98672.416896] usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[98672.416986] usb 1-3.1: configuration #1 chosen from 1 choice
[98672.417200] hub 1-3.1:1.0: USB hub found
[98672.417266] hub 1-3.1:1.0: 3 ports detected
[98672.688152] usb 1-3.1.1: new high speed USB device using ehci_hcd and address 29
[98672.826649] usb 1-3.1.1: New USB device found, idVendor=0424, idProduct=4060
[98672.826653] usb 1-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[98672.826656] usb 1-3.1.1: Product: Ultra Fast Media Reader
[98672.826658] usb 1-3.1.1: Manufacturer: Generic
[98672.826660] usb 1-3.1.1: SerialNumber: 000000264001
[98672.826757] usb 1-3.1.1: configuration #1 chosen from 1 choice
[98672.827052] scsi11 : SCSI emulation for USB Mass Storage devices
[98672.827136] usb-storage: device found at 29
[98672.827139] usb-storage: waiting for device to settle before scanning
[98677.826179] usb-storage: device scan complete
[98677.832594] scsi 11:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0
[98677.833061] sd 11:0:0:0: Attached scsi generic sg2 type 0
[98677.843824] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[98678.312074] usb 1-3.1.3: new high speed USB device using ehci_hcd and address 30
[98678.405453] usb 1-3.1.3: New USB device found, idVendor=1058, idProduct=070a
[98678.405457] usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[98678.405460] usb 1-3.1.3: Product: My Passport 070A
[98678.405462] usb 1-3.1.3: Manufacturer: Western Digital
[98678.405464] usb 1-3.1.3: SerialNumber: 57584630453739454E4A3034
[98678.405570] usb 1-3.1.3: configuration #1 chosen from 1 choice
[98678.406336] scsi12 : SCSI emulation for USB Mass Storage devices
[98678.406425] usb-storage: device found at 30
[98678.406428] usb-storage: waiting for device to settle before scanning
[98683.404203] usb-storage: device scan complete
[98683.405012] scsi 12:0:0:0: Direct-Access WD My Passport 070A 1028 PQ: 0 ANSI: 4
[98683.405752] scsi 12:0:0:1: CD-ROM WD Virtual CD 070A 1028 PQ: 0 ANSI: 4
[98683.406500] scsi 12:0:0:2: Enclosure WD SES Device 1028 PQ: 0 ANSI: 4
[98683.406913] sd 12:0:0:0: Attached scsi generic sg3 type 0
[98683.408494] sd 12:0:0:0: [sdc] 623769600 512-byte logical blocks: (319 GB/297 GiB)
[98683.410004] sr4: scsi3-mmc drive: 51x/51x caddy
[98683.410121] sr 12:0:0:1: Attached scsi CD-ROM sr4
[98683.410221] sr 12:0:0:1: Attached scsi generic sg4 type 5
[98683.410372] ses 12:0:0:2: Attached Enclosure device
[98683.410475] ses 12:0:0:2: Attached scsi generic sg5 type 13
[98683.411753] sd 12:0:0:0: [sdc] Write Protect is off
[98683.411757] sd 12:0:0:0: [sdc] Mode Sense: 23 00 10 00
[98683.411759] sd 12:0:0:0: [sdc] Assuming drive cache: write through
[98683.414114] sd 12:0:0:0: [sdc] Assuming drive cache: write through
[98683.414118] sdc: sdc1
[98683.459365] sd 12:0:0:0: [sdc] Assuming drive cache: write through
[98683.459370] sd 12:0:0:0: [sdc] Attached SCSI disk
[98683.915368] UDF-fs: Partition marked readonly; forcing readonly mount
[98683.915871] UDF-fs INFO UDF: Mounting volume 'WD SmartWare', timestamp 2009/08/19 02:52 (1078)
[163343.772014] device eth0 left promiscuous mode
[163345.424265] device eth0 entered promiscuous mode
[163345.488258] device eth0 left promiscuous mode
[163345.532764] device eth0 entered promiscuous mode
[173332.320966] usb 1-3: USB disconnect, address 27
[173332.320970] usb 1-3.1: USB disconnect, address 28
[173332.320972] usb 1-3.1.1: USB disconnect, address 29
[173332.340863] usb 1-3.1.3: USB disconnect, address 30
[173332.638458] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[173332.638461] BUG: unable to handle kernel paging request at ffffea0001006508
[173332.638464] IP: [<ffffea0001006508>] 0xffffea0001006508
[173332.638471] PGD 168c067 PUD 168d067 PMD 80000000028001e3
[173332.638475] Oops: 0011 [#4] SMP
[173332.638477] last sysfs file: /sys/devices/virtual/net/pan0/statistics/collisions
[173332.638480] CPU 2
[173332.638482] Modules linked in: udf crc_itu_t ses enclosure drbd lru_cache cn ppdev lp nls_utf8 sco cifs bridge stp bnep acpi_cpufreq rfcomm l2cap bluetooth rfkill cpufreq_powersave cpufreq_userspace cpufreq_stats cpufreq_conservative nouveau ttm drm_kms_helper drm i2c_algo_bit nfsd lockd nfs_acl auth_rpcgss
sunrpc exportfs binfmt_misc fuse xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables loop usb_storage usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device snd uhci_hcd soundcore ehci_hcd nvidia(P) broadcom u
sbcore tg3 i2c_i801 libphy snd_page_alloc nls_base i2c_core rng_core sg dcdbas sr_mod cdrom parport_pc parport button processor wmi evdev pcspkr psmouse serio_raw ext4 mbcache jbd2 crc16 raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 multipath linear md_mod sd_
mod crc_t10dif ata_generic ata_piix libata thermal thermal_sys scsi_mod
[173332.638537] Pid: 24783, comm: umount Tainted: P D W 2.6.32-5-amd64 #1 OptiPlex 380
[173332.638539] RIP: 0010:[<ffffea0001006508>] [<ffffea0001006508>] 0xffffea0001006508
[173332.638542] RSP: 0018:ffff88011d351bc0 EFLAGS: 00010082
[173332.638544] RAX: ffffea0001006508 RBX: ffff880106d88f00 RCX: 0000000000000010
[173332.638546] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880127e334e0
[173332.638548] RBP: ffff880127e334e0 R08: 0000000000000000 R09: ffff880106d88f00
[173332.638550] R10: 0000000000000002 R11: ffffea0001006508 R12: 0000000000000000
[173332.638551] R13: 0000000000000000 R14: 0000000000000000 R15: ffff880106d88f00
[173332.638554] FS: 00007f7562ae0740(0000) GS:ffff880005480000(0000) knlGS:0000000000000000
[173332.638556] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[173332.638557] CR2: ffffea0001006508 CR3: 000000011d084000 CR4: 00000000000406e0
[173332.638559] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[173332.638561] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[173332.638563] Process umount (pid: 24783, threadinfo ffff88011d350000, task ffff8800cfa92a60)
[173332.638565] Stack:
[173332.638566] ffffffff8117f7f1 0000001000000002 0000000000000000 ffff880129802a01
[173332.638569] <0> ffffffff812fe9f6 ffff880129802a60 ffff880106d88f00 ffff880127e334e0
[173332.638572] <0> 0000000000000000 0000000000000000 0000000000000000 ffff880106d88f00
[173332.638575] Call Trace:
[173332.638581] [<ffffffff8117f7f1>] ? get_request+0x30/0x2ba
[173332.638586] [<ffffffff812fe9f6>] ? do_page_fault+0x2e0/0x2fc
[173332.638589] [<ffffffff8117fa9c>] ? get_request_wait+0x21/0x188
[173332.638596] [<ffffffffa0007274>] ? scsi_execute+0x3b/0x12f [scsi_mod]
[173332.638602] [<ffffffffa00073a8>] ? scsi_execute_req+0x40/0xb9 [scsi_mod]
[173332.638608] [<ffffffffa00073ef>] ? scsi_execute_req+0x87/0xb9 [scsi_mod]
[173332.638614] [<ffffffffa0001d20>] ? ioctl_internal_command+0x64/0x16a [scsi_mod]
[173332.638618] [<ffffffff810bc0e0>] ? pagevec_lookup+0x17/0x1e
[173332.638624] [<ffffffffa0001e80>] ? scsi_set_medium_removal+0x5a/0x98 [scsi_mod]
[173332.638629] [<ffffffffa0226eae>] ? cdrom_release+0x18f/0x1fe [cdrom]
[173332.638633] [<ffffffff810754ba>] ? smp_call_function_many+0x1ce/0x1ec
[173332.638637] [<ffffffff8110d561>] ? invalidate_bh_lru+0x0/0x42
[173332.638641] [<ffffffffa02333d2>] ? sr_block_release+0x11/0x1d [sr_mod]
[173332.638645] [<ffffffff811126a2>] ? __blkdev_put+0x94/0x14c
[173332.638648] [<ffffffff810f128d>] ? deactivate_super+0x60/0x77
[173332.638651] [<ffffffff81103c08>] ? sys_umount+0x2dc/0x30b
[173332.638654] [<ffffffff812fe9f6>] ? do_page_fault+0x2e0/0x2fc
[173332.638657] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[173332.638658] Code: ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 e8 93 fe 00 00 ea ff ff 08 10 ec 00 00 ea ff ff <00> 00 00 00 00 00 00 01 00 00 00 00 ff ff ff ff 00 00 00 00 00
[173332.638682] RIP [<ffffea0001006508>] 0xffffea0001006508
[173332.638685] RSP <ffff88011d351bc0>
[173332.638686] CR2: ffffea0001006508
[173332.638688] ---[ end trace a7919e7f17c0a72a ]---
lsusb:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 003: ID 046d:c069 Logitech, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc069
bcdDevice 56.01
iManufacturer 1 Logitech
iProduct 2 USB Laser Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 U56.01_B0009
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 71
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0006 1x 6 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 002 Device 002: ID 04d9:1603 Holtek Semiconductor, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04d9 Holtek Semiconductor, Inc.
idProduct 0x1603
bcdDevice 3.10
iManufacturer 1
iProduct 2 USB Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 62
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 101
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0303 lowspeed power enable connect
Port 2: 0000.0303 lowspeed power enable connect
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 036: ID 1058:070a Western Digital Technologies, Inc. My Passport Essential SE
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1058 Western Digital Technologies, Inc.
idProduct 0x070a My Passport Essential SE
bcdDevice 10.28
iManufacturer 1 Western Digital
iProduct 2 My Passport 070A
iSerial 3 57584630453739454E4A3034
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 033: ID 0424:4060 Standard Microsystems Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0424 Standard Microsystems Corp.
idProduct 0x4060
bcdDevice 1.82
iManufacturer 1 Generic
iProduct 2 Ultra Fast Media Reader
iSerial 3 000000264001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 96mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 032: ID 0424:2640 Standard Microsystems Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0424 Standard Microsystems Corp.
idProduct 0x2640
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x000d
Per-port power switching
Compound device
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 1 milli Ampere
DeviceRemovable 0x02
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 031: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 2 TT per port
bMaxPacketSize0 64
idVendor 0x0424 Standard Microsystems Corp.
idProduct 0x2514 USB 2.0 Hub
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 1 Single TT
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 2 TT per port
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x000d
Per-port power switching
Compound device
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 1 milli Ampere
DeviceRemovable 0x02
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32-5-amd64 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=f3e4bd98-0693-4461-bc5b-86429380b16c ro quiet
** Tainted: PDW (641)
* Proprietary module has been loaded.
* Kernel has oopsed before.
* Taint on warning.
** Kernel log:
[173332.638637] [<ffffffff8110d561>] ? invalidate_bh_lru+0x0/0x42
[173332.638641] [<ffffffffa02333d2>] ? sr_block_release+0x11/0x1d [sr_mod]
[173332.638645] [<ffffffff811126a2>] ? __blkdev_put+0x94/0x14c
[173332.638648] [<ffffffff810f128d>] ? deactivate_super+0x60/0x77
[173332.638651] [<ffffffff81103c08>] ? sys_umount+0x2dc/0x30b
[173332.638654] [<ffffffff812fe9f6>] ? do_page_fault+0x2e0/0x2fc
[173332.638657] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[173332.638658] Code: ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 e8 93 fe 00 00 ea ff ff 08 10 ec 00 00 ea ff ff <00> 00 00 00 00 00 00 01 00 00 00 00 ff ff ff ff 00 00 00 00 00
[173332.638682] RIP [<ffffea0001006508>] 0xffffea0001006508
[173332.638685] RSP <ffff88011d351bc0>
[173332.638686] CR2: ffffea0001006508
[173332.638688] ---[ end trace a7919e7f17c0a72a ]---
[173339.520016] usb 1-3: new high speed USB device using ehci_hcd and address 31
[173339.652332] usb 1-3: New USB device found, idVendor=0424, idProduct=2514
[173339.652336] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[173339.652425] usb 1-3: configuration #1 chosen from 1 choice
[173339.652612] hub 1-3:1.0: USB hub found
[173339.652703] hub 1-3:1.0: 3 ports detected
[173339.924336] usb 1-3.1: new high speed USB device using ehci_hcd and address 32
[173340.016335] usb 1-3.1: New USB device found, idVendor=0424, idProduct=2640
[173340.016340] usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[173340.016429] usb 1-3.1: configuration #1 chosen from 1 choice
[173340.016615] hub 1-3.1:1.0: USB hub found
[173340.016708] hub 1-3.1:1.0: 3 ports detected
[173340.288086] usb 1-3.1.1: new high speed USB device using ehci_hcd and address 33
[173340.426587] usb 1-3.1.1: New USB device found, idVendor=0424, idProduct=4060
[173340.426591] usb 1-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[173340.426593] usb 1-3.1.1: Product: Ultra Fast Media Reader
[173340.426595] usb 1-3.1.1: Manufacturer: Generic
[173340.426597] usb 1-3.1.1: SerialNumber: 000000264001
[173340.426691] usb 1-3.1.1: configuration #1 chosen from 1 choice
[173340.426965] scsi13 : SCSI emulation for USB Mass Storage devices
[173340.427039] usb-storage: device found at 33
[173340.427042] usb-storage: waiting for device to settle before scanning
[173345.425489] usb-storage: device scan complete
[173345.431651] scsi 13:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0
[173345.432059] sd 13:0:0:0: Attached scsi generic sg2 type 0
[173345.443263] sd 13:0:0:0: [sdb] Attached SCSI removable disk
[173346.044136] usb 1-3.1.3: new high speed USB device using ehci_hcd and address 34
[173346.137258] usb 1-3.1.3: New USB device found, idVendor=1058, idProduct=070a
[173346.137262] usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[173346.137264] usb 1-3.1.3: Product: My Passport 070A
[173346.137266] usb 1-3.1.3: Manufacturer: Western Digital
[173346.137268] usb 1-3.1.3: SerialNumber: 57584630453739454E4A3034
[173346.137360] usb 1-3.1.3: configuration #1 chosen from 1 choice
[173346.137655] scsi14 : SCSI emulation for USB Mass Storage devices
[173346.137732] usb-storage: device found at 34
[173346.137735] usb-storage: waiting for device to settle before scanning
[173351.136244] usb-storage: device scan complete
[173351.137082] scsi 14:0:0:0: Direct-Access WD My Passport 070A 1028 PQ: 0 ANSI: 4
[173351.137817] scsi 14:0:0:1: CD-ROM WD Virtual CD 070A 1028 PQ: 0 ANSI: 4
[173351.138562] scsi 14:0:0:2: Enclosure WD SES Device 1028 PQ: 0 ANSI: 4
[173351.138959] sd 14:0:0:0: Attached scsi generic sg3 type 0
[173351.140559] sd 14:0:0:0: [sdc] 623769600 512-byte logical blocks: (319 GB/297 GiB)
[173351.142067] sr5: scsi3-mmc drive: 51x/51x caddy
[173351.142179] sr 14:0:0:1: Attached scsi CD-ROM sr5
[173351.142261] sr 14:0:0:1: Attached scsi generic sg4 type 5
[173351.142347] ses 14:0:0:2: Attached Enclosure device
[173351.142397] ses 14:0:0:2: Attached scsi generic sg5 type 13
[173351.143824] sd 14:0:0:0: [sdc] Write Protect is off
[173351.143830] sd 14:0:0:0: [sdc] Mode Sense: 23 00 10 00
[173351.143832] sd 14:0:0:0: [sdc] Assuming drive cache: write through
[173351.148180] sd 14:0:0:0: [sdc] Assuming drive cache: write through
[173351.148183] sdc: sdc1
[173351.195183] sd 14:0:0:0: [sdc] Assuming drive cache: write through
[173351.195188] sd 14:0:0:0: [sdc] Attached SCSI disk
[173351.480069] UDF-fs: Partition marked readonly; forcing readonly mount
[173351.481456] UDF-fs INFO UDF: Mounting volume 'WD SmartWare', timestamp 2009/08/19 02:52 (1078)
[174468.922121] usb 1-3.1.3: USB disconnect, address 34
[174469.148629] usb 1-3.1.3: new full speed USB device using ehci_hcd and address 35
[174469.292874] usb 1-3.1.3: new high speed USB device using ehci_hcd and address 36
[174469.401248] usb 1-3.1.3: New USB device found, idVendor=1058, idProduct=070a
[174469.401252] usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[174469.401255] usb 1-3.1.3: Product: My Passport 070A
[174469.401257] usb 1-3.1.3: Manufacturer: Western Digital
[174469.401259] usb 1-3.1.3: SerialNumber: 57584630453739454E4A3034
[174469.401355] usb 1-3.1.3: configuration #1 chosen from 1 choice
[174469.401640] scsi15 : SCSI emulation for USB Mass Storage devices
[174469.401718] usb-storage: device found at 36
[174469.401721] usb-storage: waiting for device to settle before scanning
[174474.400263] usb-storage: device scan complete
[174474.401067] scsi 15:0:0:0: Direct-Access WD My Passport 070A 1028 PQ: 0 ANSI: 4
[174474.401808] scsi 15:0:0:1: CD-ROM WD Virtual CD 070A 1028 PQ: 0 ANSI: 4
[174474.402556] scsi 15:0:0:2: Enclosure WD SES Device 1028 PQ: 0 ANSI: 4
[174474.402979] sd 15:0:0:0: Attached scsi generic sg3 type 0
[174474.405057] sr5: scsi3-mmc drive: 51x/51x caddy
[174474.405199] sr 15:0:0:1: Attached scsi CD-ROM sr5
[174474.405292] sr 15:0:0:1: Attached scsi generic sg4 type 5
[174474.405385] ses 15:0:0:2: Attached Enclosure device
[174474.405428] sd 15:0:0:0: [sdc] 623769600 512-byte logical blocks: (319 GB/297 GiB)
[174474.406138] ses 15:0:0:2: Attached scsi generic sg5 type 13
[174474.407210] sd 15:0:0:0: [sdc] Write Protect is off
[174474.407214] sd 15:0:0:0: [sdc] Mode Sense: 23 00 10 00
[174474.407216] sd 15:0:0:0: [sdc] Assuming drive cache: write through
[174474.410799] sd 15:0:0:0: [sdc] Assuming drive cache: write through
[174474.410803] sdc: sdc1
[174478.535588] sd 15:0:0:0: [sdc] Assuming drive cache: write through
[174478.535592] sd 15:0:0:0: [sdc] Attached SCSI disk
[174478.801837] UDF-fs: Partition marked readonly; forcing readonly mount
[174478.811858] UDF-fs INFO UDF: Mounting volume 'WD SmartWare', timestamp 2009/08/19 02:52 (1078)
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 380
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A05
board_vendor: Dell Inc.
board_name: 0HN7XN
board_version: A01
** Loaded modules:
Module Size Used by
udf 66612 5
crc_itu_t 1307 1 udf
ses 5144 0
enclosure 5503 1 ses
drbd 193328 0
lru_cache 5042 1 drbd
cn 4563 1 drbd
ppdev 5030 0
lp 7462 0
nls_utf8 1208 1
sco 7225 2
cifs 259088 0
bridge 39630 0
stp 1440 1 bridge
bnep 9427 2
acpi_cpufreq 5571 0
rfcomm 29613 0
l2cap 24736 6 bnep,rfcomm
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
rfkill 13044 3 bluetooth
cpufreq_powersave 902 0
cpufreq_userspace 1992 0
cpufreq_stats 2659 0
cpufreq_conservative 5162 0
nouveau 353128 0
ttm 40146 1 nouveau
drm_kms_helper 20369 1 nouveau
drm 142327 3 nouveau,ttm,drm_kms_helper
i2c_algo_bit 4225 1 nouveau
nfsd 254782 11
lockd 57603 1 nfsd
nfs_acl 2031 1 nfsd
auth_rpcgss 33476 1 nfsd
sunrpc 161541 10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3170 1 nfsd
binfmt_misc 6431 1
fuse 50892 3
xt_tcpudp 2319 4
nf_conntrack_ipv4 9833 5
nf_defrag_ipv4 1139 1 nf_conntrack_ipv4
xt_state 1303 5
nf_conntrack 46535 2 nf_conntrack_ipv4,xt_state
iptable_filter 2258 1
ip_tables 13915 1 iptable_filter
x_tables 12845 3 xt_tcpudp,xt_state,ip_tables
loop 11799 0
usb_storage 39961 6
usbhid 33292 0
hid 63257 1 usbhid
snd_hda_codec_realtek 235602 1
snd_hda_intel 20035 1
snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5380 1 snd_hda_codec
snd_pcm 60503 2 snd_hda_intel,snd_hda_codec
snd_seq 42881 0
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 1 snd_seq
snd 46526 10 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
uhci_hcd 18521 0
soundcore 4598 1 snd
ehci_hcd 32081 0
nvidia 10670090 0
broadcom 5596 0
usbcore 122498 5 usb_storage,usbhid,uhci_hcd,ehci_hcd
tg3 95663 0
i2c_i801 7830 0
libphy 14054 2 broadcom,tg3
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
nls_base 6377 4 udf,nls_utf8,cifs,usbcore
i2c_core 15819 6 nouveau,drm_kms_helper,drm,i2c_algo_bit,nvidia,i2c_i801
rng_core 3006 0
sg 24069 0
dcdbas 5048 0
sr_mod 12602 5
cdrom 29415 1 sr_mod
parport_pc 18855 1
parport 27954 3 ppdev,lp,parport_pc
button 4650 1 nouveau
processor 29935 1 acpi_cpufreq
wmi 4323 0
evdev 7352 10
pcspkr 1699 0
psmouse 49937 0
serio_raw 3752 0
ext4 288318 2
mbcache 5050 1 ext4
jbd2 67015 1 ext4
crc16 1319 2 l2cap,ext4
raid10 17809 0
raid456 44500 0
async_raid6_recov 5170 1 raid456
async_pq 3479 2 raid456,async_raid6_recov
raid6_pq 77179 2 async_raid6_recov,async_pq
async_xor 2478 3 raid456,async_raid6_recov,async_pq
xor 4380 1 async_xor
async_memcpy 1198 2 raid456,async_raid6_recov
async_tx 1734 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
raid1 18431 0
raid0 5517 0
multipath 6059 0
linear 3455 0
md_mod 73872 6 raid10,raid456,raid1,raid0,multipath,linear
sd_mod 29921 6
crc_t10dif 1276 1 sd_mod
ata_generic 3239 0
ata_piix 21124 4
libata 133760 2 ata_generic,ata_piix
thermal 11674 0
thermal_sys 11942 2 processor,thermal
scsi_mod 126517 6 ses,usb_storage,sg,sr_mod,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e30] (rev 03)
Subsystem: Dell Device [1028:0400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e31] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fdefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell Device [1028:0400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f9f00000-f9ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at ff20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Dell Device [1028:0400]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 9300 GE] [10de:06e0] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device [10de:060c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at dc80 [size=128]
Expansion ROM at fde00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] (rev 01)
Subsystem: Dell Device [1028:0400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f9ff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046d:c069 Logitech, Inc.
Bus 002 Device 002: ID 04d9:1603 Holtek Semiconductor, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 036: ID 1058:070a Western Digital Technologies, Inc. My Passport Essential SE
Bus 001 Device 033: ID 0424:4060 Standard Microsystems Corp.
Bus 001 Device 032: ID 0424:2640 Standard Microsystems Corp.
Bus 001 Device 031: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-35 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
Reply to: