Bug#638863: linux-image-3.0.0-1-amd64: Errors/warnings show during startup
Package: linux-2.6
Version: 3.0.0-1
Severity: minor
Each time I start up my laptop, the following errors (warnings?) appear:
[ 5.083819] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 5.447322] SP5100 TCO timer: mmio address 0xfec000f0 already in use
The system is working fine as far as I can tell. However, either these messages
are uncritical and should not be shown, or they are a problem that has to be
fixed.
I observed the first messages for quite a while already, even back when I still
used Kubuntu with the kernel version 2.6.38, then with 2.6.39 on Debian
testing, and now with 3.0. I do not remember seeing the second message before
the update to 3.0 though.
-- Package-specific info:
** Version:
Linux version 3.0.0-1-amd64 (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP Sun Jul 24 02:24:44 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=063a7f00-8498-4d36-ba06-e09e819487aa ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 5.928519] Bluetooth: SCO socket layer initialized
[ 5.948471] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 6.079263] Linux media interface: v0.10
[ 6.089917] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.090629] usbcore: registered new interface driver btusb
[ 6.113437] Linux video capture interface: v2.00
[ 6.146155] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 6.204072] input: CNF8243 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input8
[ 6.204167] usbcore: registered new interface driver uvcvideo
[ 6.204170] USB Video Class driver (v1.1.0)
[ 6.233434] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 6.233446] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 6.233457] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.306470] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[ 6.320288] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 6.320423] input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 6.671005] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
[ 6.671164] generic-usb 0003:046D:C069.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.2-1.4/input0
[ 6.671187] usbcore: registered new interface driver usbhid
[ 6.671190] usbhid: USB HID core driver
[ 6.768906] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[ 6.769067] cherry 0003:046A:0023.0001: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:12.2-1.3/input0
[ 6.779493] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.1/input/input14
[ 6.779650] cherry 0003:046A:0023.0002: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:12.2-1.3/input1
[ 7.060135] hp_wmi: Unknown event_id - 0 - 0x0
[ 7.060178] hp_wmi: Unknown event_id - 0 - 0x0
[ 7.456854] Adding 4095996k swap on /dev/sda2. Priority:-1 extents:1 across:4095996k
[ 7.462629] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.594586] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.747848] device-mapper: uevent: version 1.0.3
[ 7.747978] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 13.964608] Intel AES-NI instructions are not detected.
[ 14.003299] padlock_aes: VIA PadLock not detected.
[ 14.031937] padlock_sha: VIA PadLock Hash Engine not detected.
[ 14.546246] loop: module loaded
[ 15.030220] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 15.381535] fuse init (API version 7.16)
[ 17.277041] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 17.642053] lp: driver loaded but no devices found
[ 17.662161] ppdev: user-space parallel port driver
[ 17.992519] powernow-k8: Found 1 AMD Athlon(tm)X2 DualCore QL-66 (2 cpu cores) (version 2.20.00)
[ 17.992574] powernow-k8: 0 : pstate 0 (2200 MHz)
[ 17.992577] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 19.151841] sky2 0000:02:00.0: eth0: enabling interface
[ 19.153002] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.937881] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.937889] Bluetooth: BNEP filters: protocol multicast
[ 19.973566] Bluetooth: RFCOMM TTY layer initialized
[ 19.973579] Bluetooth: RFCOMM socket layer initialized
[ 19.973583] Bluetooth: RFCOMM ver 1.11
[ 20.905507] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 20.906259] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.326485] vboxdrv: Found 2 processor cores.
[ 21.327190] vboxdrv: fAsync=1 offMin=0x19f4f26 offMax=0x19f4f26
[ 21.328272] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 21.328278] vboxdrv: Successfully loaded version 4.1.0 (interface 0x00190000).
[ 21.791588] [fglrx] GART Table is not in FRAME_BUFFER range
[ 21.791993] [fglrx] Could not enable MSI; System prevented initialization
[ 21.792846] [fglrx] Firegl kernel thread PID: 1779
[ 21.792980] [fglrx] Firegl kernel thread PID: 1780
[ 21.793059] [fglrx] Firegl kernel thread PID: 1781
[ 21.793441] [fglrx] IRQ 18 Enabled
[ 21.800832] vboxpci: IOMMU not found (not registered)
[ 22.129647] [fglrx] Gart USWC size:1160 M.
[ 22.129652] [fglrx] Gart cacheable size:459 M.
[ 22.129659] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 22.129663] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 29.728040] eth1: no IPv6 routers present
[ 31.504026] eth0: no IPv6 routers present
[ 40.633562] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 40.854239] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0
[ 322.376098] usb 1-5: new high speed USB device number 5 using ehci_hcd
[ 322.509057] usb 1-5: New USB device found, idVendor=0781, idProduct=5406
[ 322.509066] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 322.509073] usb 1-5: Product: U3 Cruzer Micro
[ 322.509078] usb 1-5: Manufacturer: SanDisk
[ 322.509082] usb 1-5: SerialNumber: 17401318CE821115
[ 323.948178] usb 1-5: usbfs: USBDEVFS_CONTROL failed cmd mtp-probe rqt 128 rq 6 len 255 ret -110
[ 324.004251] usbcore: registered new interface driver uas
[ 324.025513] Initializing USB Mass Storage driver...
[ 324.025926] scsi2 : usb-storage 1-5:1.0
[ 324.026175] usbcore: registered new interface driver usb-storage
[ 324.026180] USB Mass Storage support registered.
[ 325.024950] scsi 2:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS
[ 325.049166] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 325.049400] sd 2:0:0:0: [sdb] 15731711 512-byte logical blocks: (8.05 GB/7.50 GiB)
[ 325.049899] sd 2:0:0:0: [sdb] Write Protect is off
[ 325.049906] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 325.050388] sd 2:0:0:0: [sdb] No Caching mode page present
[ 325.050396] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 325.053655] sd 2:0:0:0: [sdb] No Caching mode page present
[ 325.053667] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 325.055294] sdb: sdb1
[ 325.061012] sd 2:0:0:0: [sdb] No Caching mode page present
[ 325.061023] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 325.061031] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 406.016359] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 406.016362]
[ 2003.758025] usb 1-5: USB disconnect, device number 5
[ 4682.311182] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
** Model information
sys_vendor: Hewlett-Packard
product_name: Compaq 615
product_version: F.0F
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68GVV Ver. F.0F
board_vendor: Hewlett-Packard
board_name: 308C
board_version: KBC Version 27.09
** Loaded modules:
Module Size Used by
nls_utf8 12456 0
nls_cp437 16553 0
vfat 17270 0
fat 45828 1 vfat
usb_storage 47996 0
uas 13299 0
pci_stub 12429 1
vboxpci 19059 0
vboxnetadp 13202 0
vboxnetflt 23595 0
vboxdrv 194054 4 vboxpci,vboxnetadp,vboxnetflt
rfcomm 33848 8
bnep 17615 2
powernow_k8 17688 0
mperf 12453 1 powernow_k8
cpufreq_powersave 12454 0
parport_pc 22395 0
cpufreq_stats 12862 0
ppdev 12763 0
cpufreq_conservative 13147 0
lp 17270 0
parport 31929 3 parport_pc,ppdev,lp
cpufreq_userspace 12576 0
uinput 17469 1
fuse 62334 1
loop 22711 0
sha256_generic 16797 2
cryptd 14549 0
aes_x86_64 16796 8
aes_generic 33026 1 aes_x86_64
cbc 12755 4
dm_crypt 22611 1
dm_mod 63164 3 dm_crypt
hid_cherry 12525 0
usbhid 40516 0
hid 73172 2 hid_cherry,usbhid
snd_hda_codec_idt 53749 1
uvcvideo 61887 0
joydev 17262 0
videodev 66713 1 uvcvideo
btusb 17462 2
media 18184 2 uvcvideo,videodev
v4l2_compat_ioctl32 16567 1 videodev
snd_hda_intel 26140 8
snd_hda_codec 72699 2 snd_hda_codec_idt,snd_hda_intel
bluetooth 114376 23 rfcomm,bnep,btusb
lib80211_crypt_tkip 17250 0
fglrx 2815036 37
wl 2522352 0
snd_hwdep 13186 1 snd_hda_codec
snd_pcm 68104 4 snd_hda_intel,snd_hda_codec
snd_seq 45208 0
snd_timer 22581 4 snd_pcm,snd_seq
snd_seq_device 13137 1 snd_seq
snd 52823 20 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
sp5100_tco 12900 0
soundcore 13152 1 snd
hp_wmi 13329 0
evdev 17558 21
i2c_piix4 12536 0
snd_page_alloc 13043 2 snd_hda_intel,snd_pcm
i2c_core 23909 2 videodev,i2c_piix4
k10temp 12611 0
sparse_keymap 12795 1 hp_wmi
video 17707 0
ac 12624 0
battery 13109 0
psmouse 55656 0
shpchp 31343 0
pcspkr 12579 0
rfkill 19080 3 bluetooth,hp_wmi
container 12581 0
power_supply 13475 2 ac,battery
serio_raw 12846 0
button 12930 1 fglrx
processor 27942 1 powernow_k8
wmi 13243 1 hp_wmi
pci_hotplug 27232 1 shpchp
lib80211 12990 2 lib80211_crypt_tkip,wl
ext4 313917 2
mbcache 13066 1 ext4
jbd2 62574 1 ext4
crc16 12343 2 bluetooth,ext4
sg 25985 0
sd_mod 36259 4
crc_t10dif 12348 1 sd_mod
sr_mod 21811 0
cdrom 35093 1 sr_mod
ohci_hcd 26576 0
ahci 25089 3
libahci 22767 1 ahci
libata 149043 2 ahci,libahci
fan 12674 0
thermal 17426 0
thermal_sys 17949 4 video,processor,fan,thermal
scsi_mod 162442 6 usb_storage,uas,sg,sd_mod,sr_mod,libata
ehci_hcd 40090 0
usbcore 124242 8 usb_storage,uas,usbhid,uvcvideo,btusb,ohci_hcd,ehci_hcd
sky2 45425 0
** Network interface configuration:
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether d8:d3:85:1c:55:54 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.100/24 brd 192.168.1.255 scope global eth0
inet6 fe80::dad3:85ff:fe1c:5554/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DORMANT qlen 1000
link/ether c4:17:fe:c0:33:de brd ff:ff:ff:ff:ff:ff
inet6 fe80::c617:feff:fec0:33de/64 scope link
valid_lft forever preferred_lft forever
4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 34801 254 0 0 0 0 0 0 34801 254 0 0 0 0 0 0
eth0: 84317579 115498 0 0 0 0 0 9 53179358 91815 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
vboxnet0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
115518 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
115516 incoming packets delivered
91908 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
750 active connections openings
5 passive connection openings
59 failed connection attempts
22 connection resets received
8 connections established
80502 segments received
75365 segments send out
275 segments retransmited
0 bad segments received.
385 resets sent
Udp:
34991 packets received
0 packets to unknown port received.
0 packet receive errors
43582 packets sent
UdpLite:
TcpExt:
2 packets pruned from receive queue because of socket buffer overrun
335 TCP sockets finished time wait in fast timer
911 delayed acks sent
Quick ack mode was activated 96 times
147 packets directly queued to recvmsg prequeue.
21207 bytes directly received in process context from prequeue
52535 packet headers predicted
53 packets header predicted and directly queued to user
2616 acknowledgments not containing data payload received
16991 predicted acknowledgments
85 congestion windows recovered without slow start after partial ack
1 timeouts after SACK recovery
129 other TCP timeouts
179 packets collapsed in receive queue due to low socket buffer
94 DSACKs sent for old packets
57 DSACKs received
62 connections reset due to unexpected data
8 connections reset due to early user close
21 connections aborted due to timeout
TCPDSACKIgnoredOld: 2
TCPDSACKIgnoredNoUndo: 28
IpExt:
InBcastPkts: 51
OutBcastPkts: 51
InOctets: 82725010
OutOctets: 51922165
InBcastOctets: 4194
OutBcastOctets: 4194
*** Device features:
eth0: 0x70014823
eth1: 0x4000
lo: 0xa01b7c65
vboxnet0: 0x4000
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d4200000-d43fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d3100000-d41fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d2100000-d30fffff
Prefetchable memory behind bridge: 00000000d1000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: d2000000-d20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 6018 [size=8]
Region 1: I/O ports at 6024 [size=4]
Region 2: I/O ports at 6010 [size=8]
Region 3: I/O ports at 6020 [size=4]
Region 4: I/O ports at 6000 [size=16]
Region 5: Memory at d4409000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4408000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4407000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d4409500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d4406000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d4405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d4409400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a)
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR+ INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=80, subordinate=8f, sec-latency=64
I/O behind bridge: 00001000-00001fff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d4404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 5000 [size=256]
Region 2: Memory at d4300000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at d4200000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8042 PCI-E Fast Ethernet Controller [11ab:4357] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:308c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d3100000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 3000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
06:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1508]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d2000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd
Bus 006 Device 002: ID 03f0:231d Hewlett-Packard
Bus 001 Device 003: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard
Bus 001 Device 004: ID 046d:c069 Logitech, Inc.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.3 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-3.0.0-1-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-3.0.0-1-amd64 suggests:
ii grub-pc 1.99-11 GRand Unified Bootloader, version
pn linux-doc-3.0.0 <none> (no description available)
Versions of packages linux-image-3.0.0-1-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true
linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false
linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64:
Reply to: