Bug#637395: linux-image-3.0.0-1-686-pae: EEE-PC 1000H: cpufreq cannot be set to ondemand
Package: linux-2.6
Version: 3.0.0-1
Severity: normal
EXACT STEPS LEADING TO PROBLEM (done as root):
1. echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
2. cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
EXPECTED OUTCOME:
ondemand
ACTUAL OUTCOME:
performance
Gnome cpufreq applet shows "Performance". This also cannot be changed
to "Ondemand", another frequency cannot be selected neither.
REPRODUCIBILITY:
always
EXTRA SOFTWARE INSTALLED:
cpufrequtils 007-2
gnome-applets 2.30.0-4 (for cpufreq-applet)
OTHER COMMENTS:
cpufreq-applet shows the frequencies:
1.6GHz, 1.4GHz, 1.2GHz, 999MHz, 799MHz, 599MHz, 399MHz, 199MHz
but 1.6GHz, 1.33GHz and 799MHz are expected only (like in <= 2.39.x)
I tried the same with a Lenovo t420i with linux-image-3.0.0-1-amd64 and it
works as expected (so cpufreq works). On the EEE-PC it worked fine with
2.6.39-2-i686-pae.
-- Package-specific info:
** Version:
Linux version 3.0.0-1-686-pae (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-3) ) #1 SMP Sun Jul 24 14:27:32 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-3.0.0-1-686-pae root=/dev/mapper/bigend-root ro quiet printk.time=0 splash video=i915:modeset=1
** Tainted: CO (5120)
* Module from drivers/staging has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
speakup: module is from the staging directory, the quality is unknown, you have been warned.
input: Speakup as /devices/virtual/input/input12
initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
speakup 3.1.6: initialized
synth name on entry is: (null)
speakup_soft: module is from the staging directory, the quality is unknown, you have been warned.
synth probe
initialized device: /dev/softsynth, node (MAJOR 10, MINOR 26)
Adding 3903484k swap on /dev/mapper/bigend-swap. Priority:-1 extents:1 across:3903484k
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-5): using internal journal
EXT3-fs (dm-5): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-3): using internal journal
EXT3-fs (dm-3): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-4): using internal journal
EXT3-fs (dm-4): mounted filesystem with ordered data mode
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.16)
pciehp: Unknown parameter `pciehp_slot_with_bus'
NET: Registered protocol family 15
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
padlock_sha: VIA PadLock Hash Engine not detected.
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
NET: Registered protocol family 12
ATL1E 0000:03:00.0: irq 44 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
ADDRCONF(NETDEV_UP): wlan0: link is not ready
apm: BIOS not found.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
composite sync not supported
composite sync not supported
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
ondemand governor failed, too long transition latency of HW, fallback to performance governor
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
cpufreq-nforce2: No nForce2 chipset.
powernow: This module only works with AMD K7 CPUs
ondemand governor failed, too long transition latency of HW, fallback to performance governor
ondemand governor failed, too long transition latency of HW, fallback to performance governor
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Disabling lock debugging due to kernel taint
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x1e0 offMax=0x1950
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.8 (interface 0x00180000).
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
type=1305 audit(1312988451.196:57311): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
type=1305 audit(1312988451.196:57312): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
hda-intel: Invalid position buffer, using LPIB read method instead.
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
wlan0: authenticate with 00:14:bf:c4:c1:fd (try 1)
wlan0: authenticated
wlan0: associate with 00:14:bf:c4:c1:fd (try 1)
wlan0: RX AssocResp from 00:14:bf:c4:c1:fd (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
exe (3420): /proc/3420/oom_adj is deprecated, please use /proc/3420/oom_score_adj instead.
keyboard: can't emulate rawmode for keycode 240
keyboard: can't emulate rawmode for keycode 240
Monitor-Mwait will be used to enter C-3 state
ondemand governor failed, too long transition latency of HW, fallback to performance governor
keyboard: can't emulate rawmode for keycode 240
keyboard: can't emulate rawmode for keycode 240
composite sync not supported
composite sync not supported
composite sync not supported
ondemand governor failed, too long transition latency of HW, fallback to performance governor
ondemand governor failed, too long transition latency of HW, fallback to performance governor
ondemand governor failed, too long transition latency of HW, fallback to performance governor
** Model information
not available
** Loaded modules:
Module Size Used by
vboxnetadp 13182 0
vboxnetflt 23919 0
vboxdrv 154720 2 vboxnetadp,vboxnetflt
ip6table_filter 12492 0
ip6_tables 17255 1 ip6table_filter
iptable_filter 12488 0
ip_tables 17149 1 iptable_filter
ebtable_nat 12516 0
ebtables 17066 1 ebtable_nat
x_tables 18076 5 ip6table_filter,ip6_tables,iptable_filter,ip_tables,ebtables
cpufreq_userspace 12520 0
cpufreq_powersave 12422 0
cpufreq_conservative 12987 0
cpufreq_stats 12758 0
mperf 12421 0
p4_clockmod 12572 1
speedstep_lib 12570 1 p4_clockmod
parport_pc 22059 0
ppdev 12651 0
lp 12894 0
parport 27241 3 parport_pc,ppdev,lp
bnep 17301 2
rfcomm 28700 9
binfmt_misc 12880 1
decnet 51703 0 [permanent]
uinput 12953 1
deflate 12495 0
zlib_deflate 21266 1 deflate
ctr 12851 0
twofish_generic 16529 0
twofish_i586 12453 0
twofish_common 20528 2 twofish_generic,twofish_i586
camellia 28988 0
serpent 24847 0
blowfish 16576 0
cast5 24773 0
des_generic 20771 0
xcbc 12629 0
rmd160 16584 0
sha512_generic 16675 0
sha1_generic 12511 0
hmac 12787 0
crypto_null 12636 0
af_key 31284 0
fuse 56331 1
nfsd 197933 2
nfs 218404 0
lockd 61314 2 nfsd,nfs
fscache 31952 1 nfs
auth_rpcgss 32183 2 nfsd,nfs
nfs_acl 12463 2 nfsd,nfs
sunrpc 139050 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
speakup_soft 12646 0
speakup 66867 1 speakup_soft
loop 17866 0
arc4 12418 2
btusb 17246 2
bluetooth 94736 23 bnep,rfcomm,btusb
crc16 12327 1 bluetooth
snd_hda_codec_realtek 206339 1
snd_hda_intel 21691 2
snd_hda_codec 58364 2 snd_hda_codec_realtek,snd_hda_intel
joydev 17006 0
uvcvideo 56927 0
snd_hwdep 12936 1 snd_hda_codec
snd_pcm_oss 36377 0
videodev 61530 1 uvcvideo
snd_mixer_oss 17713 1 snd_pcm_oss
media 13692 2 uvcvideo,videodev
snd_pcm 53315 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 12744 0
snd_rawmidi 22621 1 snd_seq_midi
snd_seq_midi_event 13124 1 snd_seq_midi
snd_seq 39539 2 snd_seq_midi,snd_seq_midi_event
snd_timer 22027 2 snd_pcm,snd_seq
snd_seq_device 12985 3 snd_seq_midi,snd_rawmidi,snd_seq
rt2800pci 13628 0
rt2800lib 39006 1 rt2800pci
crc_ccitt 12331 1 rt2800lib
rt2x00pci 12766 1 rt2800pci
snd 38562 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
rt2x00lib 28943 3 rt2800pci,rt2800lib,rt2x00pci
uhci_hcd 22275 0
mac80211 165768 3 rt2800lib,rt2x00pci,rt2x00lib
ehci_hcd 35401 0
soundcore 12992 1 snd
snd_page_alloc 12899 2 snd_hda_intel,snd_pcm
psmouse 46216 0
rng_core 12616 0
cfg80211 112970 2 rt2x00lib,mac80211
usbcore 104234 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
atl1e 27316 0
eeepc_laptop 18249 0
eeprom_93cx6 12423 1 rt2800pci
serio_raw 12734 0
sparse_keymap 12707 1 eeepc_laptop
ac 12552 0
battery 12957 0
evdev 12995 30
rfkill 18522 5 bluetooth,cfg80211,eeepc_laptop
power_supply 13283 2 ac,battery
pci_hotplug 26736 1 eeepc_laptop
processor 27382 2
ext3 99597 5
jbd 42027 1 ext3
mbcache 12898 1 ext3
sha256_generic 16709 2
aes_i586 16608 6
aes_generic 37066 1 aes_i586
cbc 12667 2
dm_crypt 18029 1
dm_mirror 17348 0
dm_region_hash 13274 1 dm_mirror
dm_log 13350 2 dm_mirror,dm_region_hash
dm_mod 56894 21 dm_crypt,dm_mirror,dm_log
sd_mod 35493 3
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
i915 294451 2
ata_piix 21110 2
libata 133339 2 ata_generic,ata_piix
drm_kms_helper 22688 1 i915
drm 129806 3 i915,drm_kms_helper
scsi_mod 135178 2 sd_mod,libata
i2c_algo_bit 12722 1 i915
thermal 13138 0
i2c_core 19141 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
button 12810 1 i915
video 17475 1 i915
thermal_sys 17677 3 processor,thermal,video
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:831a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 7fa00000-7fbfffff
Prefetchable memory behind bridge: 000000007fc00000-000000007fdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 000000007f800000-000000007f9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 Network controller [0280]: Ralink corp. RT2860 [1814:0781]
Subsystem: Ralink corp. Device [1814:2790]
Physical Slot: eeepc-wifi
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci
03:00.0 Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 005 Device 002: ID 0b05:b700 ASUSTek Computer, Inc. Broadcom Bluetooth 2.1
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.0.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.3 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-3.0.0-1-686-pae recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-3.0.0-1-686-pae suggests:
ii grub-pc 1.99-9 GRand Unified Bootloader, version
pn linux-doc-3.0.0 <none> (no description available)
Versions of packages linux-image-3.0.0-1-686-pae is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.33 Binary firmware for various driver
ii firmware-linux-nonfree 0.33 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.33 Binary firmware for Ralink wireles
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
Reply to: