--- Begin Message ---
Subject: kernel BUG at fs/buffer.c:3190
Package: kernel
Severity: critical
Justification: breaks the whole system
Please find additional error information in the attached screenshots and
dmesg output.
-- System Information:
Debian Release: 5.0.4
APT prefers stable
APT policy: (990, 'stable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-486
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-486 (Debian 2.6.26-21lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Wed Feb 10 08:34:42 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bee0000 (usable)
[ 0.000000] BIOS-e820: 000000001bee0000 - 000000001bee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bee3000 - 000000001bef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bef0000 - 000000001bf00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 446MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00f3600] 000f3600
[ 0.000000] Entering add_active_range(0, 0, 114400) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114400
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114400
[ 0.000000] On node 0 totalpages: 114400
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 862 pages used for memmap
[ 0.000000] Normal zone: 109442 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F7790, 0014 (r0 P4M80P)
[ 0.000000] ACPI: RSDT 1BEE3040, 002C (r1 P4M80P AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 1BEE30C0, 0074 (r1 P4M80P AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 1BEE3180, 4F3D (r1 P4M80P AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 1BEE0000, 0040
[ 0.000000] ACPI: APIC 1BEE8100, 005A (r1 P4M80P AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1bf00000:e2d00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113506
[ 0.000000] Kernel command line: root=/dev/mapper/pips2-root ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1197.054 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 443024k/457600k available (1696k kernel code, 13988k reserved, 747k data, 320k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB)
[ 0.004000] vmalloc : 0xdc800000 - 0xfffb1000 ( 567 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdbee0000 ( 446 MB)
[ 0.004000] .init : 0xc0366000 - 0xc03b6000 ( 320 kB)
[ 0.004000] .data : 0xc02a83a5 - 0xc0363000 ( 747 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02a83a5 (1696 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084181] Calibrating delay using timer specific routine.. 2397.28 BogoMIPS (lpj=4794562)
[ 0.084251] Security Framework initialized
[ 0.084263] SELinux: Disabled at boot.
[ 0.084271] Capability LSM initialized
[ 0.084298] Mount-cache hash table entries: 512
[ 0.084520] Initializing cgroup subsys ns
[ 0.084529] Initializing cgroup subsys cpuacct
[ 0.084535] Initializing cgroup subsys devices
[ 0.084573] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084580] CPU: L2 Cache: 128K (64 bytes/line)
[ 0.084598] CPU: Centaur VIA Esther processor 1200MHz stepping 09
[ 0.084613] Checking 'hlt' instruction... OK.
[ 0.103421] Freeing SMP alternatives: 0k freed
[ 0.103434] ACPI: Core revision 20080321
[ 0.120222] ENABLING IO-APIC IRQs
[ 0.120557] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.164010] net_namespace: 652 bytes
[ 0.164010] Booting paravirtualized kernel on bare hardware
[ 0.164010] NET: Registered protocol family 16
[ 0.164010] EISA bus registered
[ 0.164010] ACPI: bus type pci registered
[ 0.172010] PCI: PCI BIOS revision 2.10 entry at 0xf9310, last bus=1
[ 0.172010] PCI: Using configuration type 1 for base access
[ 0.172010] Setting up standard PCI resources
[ 0.176011] ACPI: EC: Look up EC in DSDT
[ 0.183180] ACPI Error (dsobject-0501): Package List length (8) larger than NumElements count (2), truncated
[ 0.183193] [20080321]
[ 0.183394] ACPI Error (dsobject-0501): Package List length (8) larger than NumElements count (2), truncated
[ 0.183405] [20080321]
[ 0.191036] ACPI: Interpreter enabled
[ 0.191049] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.191090] ACPI: Using IOAPIC for interrupt routing
[ 0.202357] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.203594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.287227] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 0.287659] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *15
[ 0.288104] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[ 0.288491] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.288869] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.289232] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.289593] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.289955] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.290419] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 0.290855] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 0.291291] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 0.291811] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[ 0.292116] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.292177] pnp: PnP ACPI init
[ 0.292199] ACPI: bus type pnp registered
[ 0.299884] pnp: PnP ACPI: found 11 devices
[ 0.299893] ACPI: ACPI bus type pnp unregistered
[ 0.299902] PnPBIOS: Disabled by ACPI PNP
[ 0.300396] PCI: Using ACPI for IRQ routing
[ 0.300769] ACPI: RTC can wake from S4
[ 0.300824] system 00:00: iomem range 0xd1000-0xd3fff has been reserved
[ 0.300833] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.300842] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.300850] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.300860] system 00:00: iomem range 0x1bee0000-0x1befffff could not be reserved
[ 0.300870] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.300879] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.300888] system 00:00: iomem range 0x100000-0x1bedffff could not be reserved
[ 0.300897] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.300906] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.300916] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.300935] system 00:02: ioport range 0x400-0x47f has been reserved
[ 0.300944] system 00:02: ioport range 0x500-0x50f has been reserved
[ 0.300967] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.300975] system 00:03: ioport range 0x294-0x297 has been reserved
[ 0.331735] PCI: Bridge: 0000:00:01.0
[ 0.331742] IO window: b000-bfff
[ 0.331752] MEM window: 0xfb000000-0xfcffffff
[ 0.331761] PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
[ 0.331790] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.331849] NET: Registered protocol family 2
[ 0.332057] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.332539] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.332798] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.332961] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.332968] TCP reno registered
[ 0.333168] NET: Registered protocol family 1
[ 0.333463] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 1.063835] it is
[ 1.837637] Freeing initrd memory: 6817k freed
[ 1.838660] audit: initializing netlink socket (disabled)
[ 1.838688] type=2000 audit(1268565794.836:1): initialized
[ 1.838883] Total HugeTLB memory allocated, 0
[ 1.839010] VFS: Disk quotas dquot_6.5.1
[ 1.839071] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.839140] msgmni has been set to 878
[ 1.839354] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.839363] io scheduler noop registered
[ 1.839369] io scheduler anticipatory registered
[ 1.839375] io scheduler deadline registered
[ 1.839401] io scheduler cfq registered (default)
[ 1.839435] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.839526] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 1.839544] pci 0000:01:00.0: Boot video device
[ 1.840241] isapnp: Scanning for PnP cards...
[ 2.194643] isapnp: No Plug & Play device found
[ 2.199176] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 2.199355] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.199520] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.200915] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.201220] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.203731] brd: module loaded
[ 2.203900] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.203909] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.204129] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.204348] mice: PS/2 mouse device common for all mice
[ 2.204556] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.204594] rtc0: alarms up to one year, y3k
[ 2.204799] EISA: Probing bus 0 at eisa.0
[ 2.204854] EISA: Detected 0 cards.
[ 2.204862] cpuidle: using governor ladder
[ 2.204867] cpuidle: using governor menu
[ 2.204878] No iBFT detected.
[ 2.205989] TCP cubic registered
[ 2.205997] NET: Registered protocol family 17
[ 2.206011] Using IPI Shortcut mode
[ 2.206243] registered taskstats version 1
[ 2.206585] rtc_cmos 00:05: setting system clock to 2010-03-14 11:23:15 UTC (1268565795)
[ 2.207096] Freeing unused kernel memory: 320k freed
[ 2.225943] input: AT Translated Set 2 keyboard as /class/input/input0
[ 2.457527] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 2.457544] ACPI: Fan [FAN] (on)
[ 2.468278] ACPI: ACPI0007:00 is registered as cooling_device1
[ 2.472664] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 2.473494] ACPI: Thermal Zone [THRM] (30 C)
[ 3.898618] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 3.951563] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.137146] Uniform Multi-Platform E-IDE driver
[ 4.137161] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.271797] usbcore: registered new interface driver usbfs
[ 4.271864] usbcore: registered new interface driver hub
[ 4.271958] usbcore: registered new device driver usb
[ 4.278669] USB Universal Host Controller Interface driver v3.0
[ 4.368347] VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.14
[ 4.368358] Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
[ 4.368364] Copyright (c) 2004 Red Hat Inc.
[ 4.368398] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 4.369609] eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
[ 4.369619] eth0: Ethernet Address: 00:40:63:F5:54:7C
[ 4.384810] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 4.384827] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 4.384852] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 4.385184] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 4.385236] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00
[ 4.385434] usb usb1: configuration #1 chosen from 1 choice
[ 4.385498] hub 1-0:1.0: USB hub found
[ 4.385519] hub 1-0:1.0: 2 ports detected
[ 4.488341] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.488352] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.488360] usb usb1: Product: UHCI Host Controller
[ 4.488367] usb usb1: Manufacturer: Linux 2.6.26-2-486 uhci_hcd
[ 4.488373] usb usb1: SerialNumber: 0000:00:10.0
[ 4.488484] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 4.488507] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 4.488556] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 4.488592] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
[ 4.488782] usb usb2: configuration #1 chosen from 1 choice
[ 4.488845] hub 2-0:1.0: USB hub found
[ 4.488863] hub 2-0:1.0: 2 ports detected
[ 4.592241] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.592252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.592259] usb usb2: Product: UHCI Host Controller
[ 4.592266] usb usb2: Manufacturer: Linux 2.6.26-2-486 uhci_hcd
[ 4.592272] usb usb2: SerialNumber: 0000:00:10.1
[ 4.592381] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 4.592405] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 4.592455] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 4.592490] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400
[ 4.592690] usb usb3: configuration #1 chosen from 1 choice
[ 4.592754] hub 3-0:1.0: USB hub found
[ 4.592772] hub 3-0:1.0: 2 ports detected
[ 4.696225] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.696236] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.696244] usb usb3: Product: UHCI Host Controller
[ 4.696250] usb usb3: Manufacturer: Linux 2.6.26-2-486 uhci_hcd
[ 4.696256] usb usb3: SerialNumber: 0000:00:10.2
[ 4.696354] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 4.696388] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 4.696440] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[ 4.696527] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdffd000
[ 4.708019] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.708212] usb usb4: configuration #1 chosen from 1 choice
[ 4.708281] hub 4-0:1.0: USB hub found
[ 4.708312] hub 4-0:1.0: 6 ports detected
[ 4.812229] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.812239] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.812247] usb usb4: Product: EHCI Host Controller
[ 4.812253] usb usb4: Manufacturer: Linux 2.6.26-2-486 ehci_hcd
[ 4.812259] usb usb4: SerialNumber: 0000:00:10.4
[ 4.823298] No dock devices found.
[ 4.841858] SCSI subsystem initialized
[ 4.865496] libata version 3.00 loaded.
[ 4.878459] sata_via 0000:00:0f.0: version 2.3
[ 4.879091] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 4.879105] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 4.879190] sata_via 0000:00:0f.0: routed to hard irq line 15
[ 4.881263] scsi0 : sata_via
[ 4.881505] scsi1 : sata_via
[ 4.884957] ata1: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xe400 irq 20
[ 4.884966] ata2: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xe408 irq 20
[ 5.088089] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.259690] ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 5.259701] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.264373] ata1.00: configured for UDMA/133
[ 5.468011] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 5.478862] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[ 5.524918] Driver 'sd' needs updating - please use bus_type methods
[ 5.526626] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 5.526660] sd 0:0:0:0: [sda] Write Protect is off
[ 5.526668] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.526710] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.526857] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
[ 5.526882] sd 0:0:0:0: [sda] Write Protect is off
[ 5.526889] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.526928] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.526937] sda: sda1 sda2
[ 5.546266] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.636287] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00406350000afb4d]
[ 5.805853] device-mapper: uevent: version 1.0.3
[ 5.807890] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 6.002553] PM: Starting manual resume from disk
[ 6.059398] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.059408] EXT3-fs: write access will be enabled during recovery.
[ 7.992079] kjournald starting. Commit interval 5 seconds
[ 7.992116] EXT3-fs: dm-0: orphan cleanup on readonly fs
[ 7.992131] ext3_orphan_cleanup: deleting unreferenced inode 8491
[ 7.992212] ext3_orphan_cleanup: deleting unreferenced inode 126
[ 8.000073] ext3_orphan_cleanup: deleting unreferenced inode 84
[ 8.000073] EXT3-fs: dm-0: 3 orphan inodes deleted
[ 8.000073] EXT3-fs: recovery complete.
[ 8.007164] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.071316] udevd version 125 started
[ 12.070417] Linux agpgart interface v0.103
[ 12.163349] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.182061] agpgart: Detected VIA VT3314 chipset
[ 12.192035] agpgart: AGP aperture is 128M @ 0xe8000000
[ 12.235343] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.795730] input: PC Speaker as /class/input/input1
[ 14.074981] input: Power Button (FF) as /class/input/input2
[ 14.102393] ACPI: Power Button (FF) [PWRF]
[ 14.102555] input: Power Button (CM) as /class/input/input3
[ 14.129309] ACPI: Power Button (CM) [PWRB]
[ 14.129487] input: Sleep Button (CM) as /class/input/input4
[ 14.162151] ACPI: Sleep Button (CM) [SLPB]
[ 14.482209] Error: Driver 'pcspkr' is already registered, aborting...
[ 14.510163] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 14.510181] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
[ 14.510349] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 17.391587] EXT3 FS on dm-0, internal journal
[ 17.968003] loop: module loaded
[ 25.188015] kjournald starting. Commit interval 5 seconds
[ 25.196257] EXT3 FS on dm-2, internal journal
[ 25.196271] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.236301] Adding 1314808k swap on /dev/mapper/pips2-swap_1. Priority:-1 extents:1 across:1314808k
[ 26.376002] Velocity is AUTO mode
[ 26.575506] RPC: Registered udp transport module.
[ 26.575516] RPC: Registered tcp transport module.
[ 26.976003] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 27.542652] NET: Registered protocol family 10
[ 27.543638] lo: Disabled Privacy Extensions
[ 27.544776] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.335940] eth0: Link auto-negotiation speed 100M bps full duplex
[ 29.336011] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.240540] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 31.240870] NFSD: starting 90-second grace period
[ 35.540884] warning: `proftpd' uses 32-bit capabilities (legacy support in use)
[ 40.300031] eth0: no IPv6 routers present
--- End Message ---