Your message dated Fri, 5 Aug 2011 22:22:20 +0200 with message-id <20110805202219.GA27731@elie.gateway.2wire.net> and subject line Re: X.org with i915 produces garbage sometimes being run on Linux 2.6.38 has caused the Debian Bug report #619472, regarding X.org with i915 produces garbage sometimes being run on Linux 2.6.38 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 619472: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=619472 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: X.org with i915 produces garbage sometimes being run on Linux 2.6.38
- From: "Andrew O. Shadoura" <bugzilla@tut.by>
- Date: Thu, 24 Mar 2011 12:30:07 +0200
- Message-id: <20110324103007.27269.45918.reportbug@localhost>
Package: linux-2.6 Version: 2.6.38-1 Severity: normal After upgrading the kernel, X.org produces garbage in random screen areas. That garbage persists in the windows in which it appears (I'm able to take a screenshot of it). -- Package-specific info: ** Version: Linux version 2.6.38-1-686 (Debian 2.6.38-1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Wed Mar 16 17:37:47 UTC 2011 ** Command line: root=UUID=970a25e2-30c2-4cd0-b6b0-0cc69e297c52 ro quiet splash video=radeonfb:mode_option=1400x1050-24@60 ** Not tainted ** Kernel log: [ 3244.698833] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3244.698840] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3244.698868] usb usb4: root hub lost power or was reset [ 3244.698883] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3244.698890] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3244.698943] pci 0000:00:1e.0: setting latency timer to 64 [ 3244.698960] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3244.698966] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 3244.699139] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3244.699207] tg3 0000:09:00.0: wake-up capability disabled by ACPI [ 3244.699214] tg3 0000:09:00.0: PME# disabled [ 3244.733346] sd 0:0:0:0: [sda] Starting disk [ 3244.793753] serial 00:0c: activated [ 3244.932318] ata2.00: configured for UDMA/33 [ 3245.096041] usb 1-2: reset full speed USB device using uhci_hcd and address 2 [ 3245.541132] usb 1-2.3: reset full speed USB device using uhci_hcd and address 4 [ 3245.953128] usb 1-2.3.2: reset full speed USB device using uhci_hcd and address 5 [ 3246.612253] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3246.628592] ata1.00: configured for UDMA/100 [ 3246.785697] PM: resume of devices complete after 2089.670 msecs [ 3246.785938] PM: Finishing wakeup. [ 3246.785940] Restarting tasks ... [ 3246.792755] usb 1-2.2: USB disconnect, address 3 [ 3246.793015] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 3246.793038] option 1-2.2:1.0: device disconnected [ 3246.793161] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 3246.793180] option 1-2.2:1.1: device disconnected [ 3246.794895] done. [ 3246.794902] video LNXVIDEO:01: Restoring backlight state [ 3246.837714] composite sync not supported [ 3247.362692] composite sync not supported [ 3247.786113] usb 1-2.2: new full speed USB device using uhci_hcd and address 6 [ 3247.923106] usb 1-2.2: New USB device found, idVendor=413c, idProduct=8116 [ 3247.923110] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3247.923113] usb 1-2.2: Product: Novatel Wireless HSDPA Modem [ 3247.923116] usb 1-2.2: Manufacturer: Novatel Wireless [ 3247.929171] option 1-2.2:1.0: GSM modem (1-port) converter detected [ 3247.929307] usb 1-2.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 3247.931136] option 1-2.2:1.1: GSM modem (1-port) converter detected [ 3247.931224] usb 1-2.2: GSM modem (1-port) converter now attached to ttyUSB1 [ 3248.004560] ata1.00: configured for UDMA/100 [ 3248.004567] ata1: EH complete [ 3249.100750] ata1.00: configured for UDMA/100 [ 3249.100761] ata1: EH complete [ 3249.504695] ata1.00: configured for UDMA/100 [ 3249.504706] ata1: EH complete [ 3249.928722] ata1.00: configured for UDMA/100 [ 3249.928732] ata1: EH complete [ 3250.312724] ata1.00: configured for UDMA/100 [ 3250.312735] ata1: EH complete [ 3250.712688] ata1.00: configured for UDMA/100 [ 3250.712699] ata1: EH complete [ 3251.136741] ata1.00: configured for UDMA/100 [ 3251.136752] ata1: EH complete [ 3251.552698] ata1.00: configured for UDMA/100 [ 3251.552709] ata1: EH complete [ 3251.968715] ata1.00: configured for UDMA/100 [ 3251.968726] ata1: EH complete [ 3269.787695] tg3 0000:09:00.0: eth1: Link is up at 1000 Mbps, full duplex [ 3269.787703] tg3 0000:09:00.0: eth1: Flow control is off for TX and off for RX [ 3269.788067] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 3270.276053] device eth1 entered promiscuous mode [ 3270.289209] device eth1 left promiscuous mode [ 3280.744078] eth1: no IPv6 routers present [ 3286.688125] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 3286.856188] usb 3-2: New USB device found, idVendor=04d9, idProduct=1400 [ 3286.856196] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3287.015892] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input11 [ 3287.016382] generic-usb 0003:04D9:1400.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1d.2-2/input0 [ 3287.049198] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.1/input/input12 [ 3287.049521] generic-usb 0003:04D9:1400.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1d.2-2/input1 [ 3287.049558] usbcore: registered new interface driver usbhid [ 3287.049562] usbhid: USB HID core driver [ 5086.461613] FS-Cache: Loaded [ 5086.498179] FS-Cache: Netfs 'cifs' registered for caching [14208.198035] usb 1-2.4: new full speed USB device using uhci_hcd and address 7 [14208.350049] usb 1-2.4: New USB device found, idVendor=413c, idProduct=8103 [14208.350056] usb 1-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [14210.676074] Bluetooth: Generic Bluetooth USB driver ver 0.6 [14210.676292] usbcore: registered new interface driver btusb [14212.036086] b43-phy0: Radio hardware status changed to ENABLED [14212.412090] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [14212.485443] ADDRCONF(NETDEV_UP): wlan2: link is not ready [14213.052138] device wlan2 entered promiscuous mode [14214.694716] device wlan2 left promiscuous mode [14216.384139] wlan2: authenticate with 00:0a:07:52:23:7c (try 1) [14216.393193] wlan2: authenticated [14216.393236] wlan2: associate with 00:0a:07:52:23:7c (try 1) [14216.395543] wlan2: RX AssocResp from 00:0a:07:52:23:7c (capab=0x431 status=0 aid=2) [14216.395548] wlan2: associated [14216.396669] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [14226.624080] wlan2: no IPv6 routers present [14290.442565] wlan2: deauthenticated from 00:0a:07:52:23:7c (Reason: 3) [14290.456130] cfg80211: Calling CRDA for country: DE [14293.736626] usb 1-2.4: USB disconnect, address 7 [14293.738030] btusb_intr_complete: hci0 urb f56e5a00 failed to resubmit (19) [14293.738042] btusb_bulk_complete: hci0 urb f56e5200 failed to resubmit (19) [14293.738246] btusb_bulk_complete: hci0 urb f56e5280 failed to resubmit (19) [14293.738525] btusb_send_frame: hci0 urb d8fedd80 submission failed [14297.008098] b43-phy0: Radio hardware status changed to DISABLED ** Model information not available ** Loaded modules: Module Size Used by btusb 7877 0 md4 2577 0 hmac 2017 1 nls_utf8 928 1 cifs 205649 2 fscache 24710 1 cifs usbhid 25388 0 hid 51616 1 usbhid sco 6039 2 bnep 7739 2 rfcomm 23648 4 l2cap 26999 6 bnep,rfcomm crc16 1043 1 l2cap bluetooth 39747 7 btusb,sco,bnep,rfcomm,l2cap acpi_cpufreq 4429 0 mperf 955 1 acpi_cpufreq cpufreq_conservative 6198 0 cpufreq_powersave 622 0 cpufreq_stats 1942 0 cpufreq_userspace 1492 0 xt_tcpudp 1659 0 iptable_filter 972 0 ip_tables 7834 1 iptable_filter x_tables 9171 3 xt_tcpudp,iptable_filter,ip_tables ppdev 4049 0 parport_pc 15579 0 lp 5594 0 parport 20898 3 ppdev,parport_pc,lp pppoe 6056 0 pppox 1234 1 pppoe sit 8022 0 tunnel4 1489 1 sit ppp_generic 16127 2 pppoe,pppox slhc 3502 1 ppp_generic pktcdvd 20032 1 tun 9695 2 binfmt_misc 4762 1 uinput 5048 1 kvm_intel 37610 0 kvm 214376 1 kvm_intel fuse 48252 1 visor 6796 0 ircomm_tty 13113 0 ircomm 5918 1 ircomm_tty loop 10505 0 snd_hda_codec_idt 37819 1 snd_hda_intel 16433 0 snd_hda_codec 51871 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 3990 1 snd_hda_codec snd_pcm_oss 27020 0 snd_mixer_oss 10065 1 snd_pcm_oss snd_pcm 46902 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss ks959_sir 5195 0 snd_seq_midi 3480 0 snd_rawmidi 12531 1 snd_seq_midi snd_seq_midi_event 3652 1 snd_seq_midi arc4 1010 2 joydev 6906 0 ecb 1421 2 snd_seq 34344 2 snd_seq_midi,snd_seq_midi_event ac 1648 0 b43 135153 0 i915 267668 3 drm_kms_helper 19757 1 i915 drm 121728 4 i915,drm_kms_helper mac80211 153213 1 b43 option 12926 0 cfg80211 99905 2 b43,mac80211 button 3634 1 i915 dell_laptop 6364 0 processor 21043 3 acpi_cpufreq battery 4370 0 dell_wmi 1101 0 sparse_keymap 1940 1 dell_wmi usb_wwan 6582 1 option yenta_socket 15632 0 snd_timer 12379 2 snd_pcm,snd_seq snd_seq_device 3667 3 snd_seq_midi,snd_rawmidi,snd_seq wmi 6202 1 dell_wmi snd 33749 11 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device usbserial 21226 3 visor,option,usb_wwan pcmcia_rsrc 7078 1 yenta_socket serio_raw 2910 0 irda 70715 3 ircomm_tty,ircomm,ks959_sir psmouse 39239 0 power_supply 5535 3 ac,dell_laptop,battery video 9241 1 i915 rfkill 10550 4 bluetooth,cfg80211,dell_laptop evdev 6208 28 tpm_tis 5441 0 dcdbas 3752 1 dell_laptop soundcore 3390 1 snd snd_page_alloc 4933 2 snd_hda_intel,snd_pcm tpm 8118 1 tpm_tis i2c_i801 6198 0 tpm_bios 3455 1 tpm rng_core 2306 1 b43 crc_ccitt 1055 1 irda ext3 92941 1 jbd 31766 1 ext3 mbcache 3686 1 ext3 fan 1742 0 sg 15549 0 sd_mod 25177 3 sr_mod 10794 1 cdrom 26023 2 pktcdvd,sr_mod crc_t10dif 1028 1 sd_mod ata_generic 2191 0 ata_piix 17543 3 thermal 6062 0 ssb 32878 1 b43 libata 123224 2 ata_generic,ata_piix tg3 96079 0 ehci_hcd 29129 0 uhci_hcd 15806 0 mmc_core 46505 2 b43,ssb thermal_sys 9943 4 processor,video,fan,thermal scsi_mod 127777 4 sg,sr_mod,sd_mod,libata usbcore 94046 10 btusb,usbhid,visor,ks959_sir,option,usb_wwan,usbserial,ehci_hcd,uhci_hcd libphy 11583 1 tg3 pcmcia 24628 2 b43,ssb pcmcia_core 8273 3 yenta_socket,pcmcia_rsrc,pcmcia nls_base 4529 3 nls_utf8,cifs,usbcore radeonfb 46328 0 fb_ddc 1005 1 radeonfb i2c_algo_bit 3438 2 i915,radeonfb i2c_core 12965 7 i915,drm_kms_helper,drm,i2c_i801,radeonfb,fb_ddc,i2c_algo_bit ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Dell Device [1028:01c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at eff8 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at efec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at eff80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Dell Device [1028:01c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at efebc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 4a000000-4a1fffff Prefetchable memory behind bridge: 000000004a200000-000000004a3fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: efd00000-efdfffff Prefetchable memory behind bridge: 000000004a400000-000000004a5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: efc00000-efcfffff Prefetchable memory behind bridge: 000000004a600000-000000004a7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:01c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=07, sec-latency=32 I/O behind bridge: 00005000-00005fff Memory behind bridge: 44000000-49ffffff Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: leds-ss4200, intel-rng, iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 03:01.0 CardBus bridge [0607]: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller [1217:6972] (rev 40) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 18 Region 0: Memory at 48000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=07, sec-latency=176 Memory window 0: 40000000-43fff000 (prefetchable) Memory window 1: 44000000-47fff000 I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02) Subsystem: Dell Latitude D620 [1028:01c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at efcf0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 01) Subsystem: Dell Wireless 1490 Dual Band WLAN Mini-Card [1028:0007] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at efdfc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: b43-pci-bridge Kernel modules: ssb ** USB devices: Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 413c:8116 Dell Computer Corp. Wireless 5505 Mobile Broadband (3G HSDPA) Minicard Modem Bus 001 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 001 Device 004: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 001 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 04d9:1400 Holtek Semiconductor, Inc. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 6.0 APT prefers sid APT policy: (500, 'sid'), (500, 'oldstable'), (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.38-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.38-1-686 depends on: ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii linux-base 3 Linux image base package ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.38-1-686 recommends: ii firmware-linux-free 2.6.32-28 Binary firmware for various driver ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.38-1-686 suggests: pn grub-pc | extlinux | lilo <none> (no description available) pn linux-doc-2.6.38 <none> (no description available) Versions of packages linux-image-2.6.38-1-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.28 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) Additional package version information: ii libdrm-intel1 2.4.23-3 Userspace interface to intel-specific kernel DRM services -- runtime ii libdrm2 2.4.23-3 Userspace interface to kernel DRM services -- runtime ii xserver-xorg-video-intel 2:2.14.0-4+exp1 X.Org X server -- Intel i8xx, i9xx display driver ii xserver-xorg-core 2:1.9.4-3 Xorg X server - core server -- debconf information: linux-image-2.6.38-1-686/prerm/removing-running-kernel-2.6.38-1-686: true linux-image-2.6.38-1-686/postinst/depmod-error-initrd-2.6.38-1-686: false linux-image-2.6.38-1-686/postinst/ignoring-do-bootloader-2.6.38-1-686: * linux-image-2.6.38-1-686/postinst/missing-firmware-2.6.38-1-686:Attachment: 2011-03-24-091135_282x317_scrot.png
Description: PNG image
--- End Message ---
--- Begin Message ---
- To: "Andrew O. Shadoura" <bugzilla@tut.by>
- Cc: 619472-done@bugs.debian.org
- Subject: Re: X.org with i915 produces garbage sometimes being run on Linux 2.6.38
- From: Jonathan Nieder <jrnieder@gmail.com>
- Date: Fri, 5 Aug 2011 22:22:20 +0200
- Message-id: <20110805202219.GA27731@elie.gateway.2wire.net>
- In-reply-to: <20110613024100.GA3493@elie>
- References: <20110324103007.27269.45918.reportbug@localhost> <1301159352.26693.597.camel@localhost> <20110326213719.29b48532@ileemo> <20110326202714.GA7660@earth.universe> <20110326223736.2afc0980@ileemo> <20110613024100.GA3493@elie>
Version: 2.6.39~rc4-1~experimental.1 Andrew O. Shadoura wrote: > The bugs is reported to be fixed here: Therefore closing. Please do let us know if it happens again.
--- End Message ---
