[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#635362: Realtek ALC889: HDA Intel and kernel 3.0 gives choppy sound



Hi,

Following a bug report started in Debian BTS, in bug 635362 [1], I was
asked to post here after testing upstream kernels and reproducing the bug.

So, here's the problem: my HDA audio chip [2] started to output very
choppy sound with Linux kernel 3.0, while it worked perfectly well in
previous versions -- latest two I used being 2.6.38 and 2.6.39 from
Debian. Please note that simply booting on 2.6.39 works as usual, so
it's IMHO definitely a driver regression.

I tried Debian's 3.0 as well as mainline 3.0 and git5 snapshots, and all
3 were affected by the problem -- though the kernel log isn't exactly
the same.

I attach three dmesg outputs, always took after trying to play a sound
(and hearing it choppy, it happens every time):

dmesg-3.0.0-mainline: dmesg when running 3.0 mainline
dmesg-3.0.0-git5: when running 3.0-git5 snapshot
dmesg-3.0.0-git5-2: same as dmesg-3.0.0-git5 but configured without
CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS (doesn't change anything)

If you want to see dmesg from the 2.6.39 kernel (where sound works well)
or Debian's 3.0, see respectively [3] and [4].


Thanks by advance, and if you need any further details or testing,
please let me know.

Regards,
Colomban


[1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=635362
[2] Realtek ALC889 on an MSI H55M-E33, see lspci in Debian bug [1] for
details
[3]
http://bugs.debian.org/cgi-bin/bugreport.cgi?msg=15;filename=dmesg-2.6.39-2-amd64;att=1;bug=635362
[4]
http://bugs.debian.org/cgi-bin/bugreport.cgi?msg=15;filename=dmesg-3.0.0-1-amd64;att=2;bug=635362
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-git5 (ban@Hermione) (gcc version 4.6.1 (Debian 4.6.1-5) ) #5 SMP Tue Jul 26 16:36:47 CEST 2011
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-git5 root=/dev/mapper/hermione-debian ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[    0.000000]  BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: MSI MS-7636/H55M-E33(MS-7636)   , BIOS V1.1 11/23/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E3FFF write-protect
[    0.000000]   E4000-E7FFF write-through
[    0.000000]   E8000-EBFFF write-protect
[    0.000000]   EC000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 13C000000 mask FFC000000 uncachable
[    0.000000]   1 base 000000000 mask F00000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[    0.000000]  0000000000 - 00bf600000 page 2M
[    0.000000]  00bf600000 - 00bf780000 page 4k
[    0.000000] kernel direct mapping tables up to bf780000 @ bf77b000-bf780000
[    0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[    0.000000]  0100000000 - 0138000000 page 2M
[    0.000000] kernel direct mapping tables up to 138000000 @ 137ffa000-138000000
[    0.000000] RAMDISK: 36a24000 - 3750a000
[    0.000000] ACPI: RSDP 00000000000f9f00 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000bf780000 00044 (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bf780200 00084 (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bf7805e0 07303 (v01  A7636 A7636100 00000100 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bf78e000 00040
[    0.000000] ACPI: APIC 00000000bf780390 0008C (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bf780420 0003C (v01 7636MS OEMMCFG  20091123 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bf78e040 00072 (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bf78a5e0 00038 (v01 7636MS OEMHPET  20091123 MSFT 00000097)
[    0.000000] ACPI: GSCI 00000000bf78e0c0 02024 (v01 7636MS GMCHSCI  20091123 MSFT 00000097)
[    0.000000] ACPI: DMAR 00000000bf7900f0 00108 (v01    AMI  OEMDMAR 00000001 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bf791940 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000138000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[    0.000000]   NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880133800000-ffff880136ffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00138000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bf780
[    0.000000]     0: 0x00100000 -> 0x00138000
[    0.000000] On node 0 totalpages: 1013519
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 765880 pages, LIFO batch:31
[    0.000000]   Normal zone: 3136 pages used for memmap
[    0.000000]   Normal zone: 226240 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
[    0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000
[    0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
[    0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000
[    0.000000] PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s80896 r8192 d21504 u262144
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 996042
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-git5 root=/dev/mapper/hermione-debian ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at drivers/iommu/dmar.c:634 warn_invalid_dmar+0x77/0x85()
[    0.000000] Hardware name: MS-7636
[    0.000000] Your BIOS is broken; DMAR reported at address fed93000 returns all ones!
[    0.000000] BIOS vendor: American Megatrends Inc.; Ver: V1.1; Product Version: 1.0
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 3.0.0-git5 #5
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff810457b5>] ? warn_slowpath_common+0x78/0x8c
[    0.000000]  [<ffffffff81045817>] ? warn_slowpath_fmt_taint+0x3d/0x42
[    0.000000]  [<ffffffff8131f8b6>] ? __pte+0x7/0x8
[    0.000000]  [<ffffffff816b6839>] ? __early_set_fixmap+0x89/0x8d
[    0.000000]  [<ffffffff8131f8b6>] ? __pte+0x7/0x8
[    0.000000]  [<ffffffff816b6839>] ? __early_set_fixmap+0x89/0x8d
[    0.000000]  [<ffffffff8131f8b6>] ? __pte+0x7/0x8
[    0.000000]  [<ffffffff81251c9d>] ? warn_invalid_dmar+0x77/0x85
[    0.000000]  [<ffffffff816b6c46>] ? early_iounmap+0xc5/0x114
[    0.000000]  [<ffffffff816d5fb8>] ? check_zero_address+0xb0/0xeb
[    0.000000]  [<ffffffff8132f846>] ? bad_to_user+0x620/0x620
[    0.000000]  [<ffffffff816d6004>] ? detect_intel_iommu+0x11/0xa6
[    0.000000]  [<ffffffff816aac9d>] ? pci_iommu_alloc+0x3f/0x67
[    0.000000]  [<ffffffff816b6618>] ? mem_init+0x14/0xe5
[    0.000000]  [<ffffffff816a494e>] ? start_kernel+0x1d0/0x3c8
[    0.000000]  [<ffffffff816a4140>] ? early_idt_handlers+0x140/0x140
[    0.000000]  [<ffffffff816a43c4>] ? x86_64_start_kernel+0x104/0x111
[    0.000000] ---[ end trace a7919e7f17c0a725 ]---
[    0.000000] Disabling lock debugging due to kernel taint
[    0.000000] Memory: 3910180k/5111808k available (3262k kernel code, 1057732k absent, 143896k reserved, 3447k data, 552k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 32505856 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2925.964 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5851.92 BogoMIPS (lpj=11703856)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000056] Security Framework initialized
[    0.000060] SELinux:  Disabled at boot.
[    0.000390] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001310] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001674] Mount-cache hash table entries: 256
[    0.001788] Initializing cgroup subsys cpuacct
[    0.001793] Initializing cgroup subsys memory
[    0.001804] Initializing cgroup subsys devices
[    0.001807] Initializing cgroup subsys freezer
[    0.001809] Initializing cgroup subsys net_cls
[    0.001811] Initializing cgroup subsys blkio
[    0.001840] CPU: Physical Processor ID: 0
[    0.001841] CPU: Processor Core ID: 0
[    0.001846] mce: CPU supports 9 MCE banks
[    0.001857] CPU0: Thermal monitoring enabled (TM1)
[    0.001865] using mwait in idle threads.
[    0.002234] ACPI: Core revision 20110413
[    0.028425] DMAR: Host address width 36
[    0.028427] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.028434] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[    0.028436] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.028444] DMAR: parse DMAR table failure.
[    0.028764] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068338] CPU0: Intel(R) Core(TM) i3 CPU         530  @ 2.93GHz stepping 02
[    0.172760] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.172766] ... version:                3
[    0.172768] ... bit width:              48
[    0.172769] ... generic registers:      4
[    0.172770] ... value mask:             0000ffffffffffff
[    0.172771] ... max period:             000000007fffffff
[    0.172773] ... fixed-purpose events:   3
[    0.172774] ... event mask:             000000070000000f
[    0.172978] NMI watchdog enabled, takes one hw-pmu counter.
[    0.173087] Booting Node   0, Processors  #1
[    0.173089] smpboot cpu 1: start_ip = 9a000
[    0.280577] NMI watchdog enabled, takes one hw-pmu counter.
[    0.280698]  #2
[    0.280700] smpboot cpu 2: start_ip = 9a000
[    0.388308] NMI watchdog enabled, takes one hw-pmu counter.
[    0.388418]  #3
[    0.388419] smpboot cpu 3: start_ip = 9a000
[    0.495971] NMI watchdog enabled, takes one hw-pmu counter.
[    0.496007] Brought up 4 CPUs
[    0.496008] Total of 4 processors activated (23407.53 BogoMIPS).
[    0.497882] devtmpfs: initialized
[    0.501030] PM: Registering ACPI NVS region at bf78e000 (270336 bytes)
[    0.501148] print_constraints: dummy: 
[    0.501196] NET: Registered protocol family 16
[    0.501277] ACPI: bus type pci registered
[    0.501328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.501330] PCI: not using MMCONFIG
[    0.501332] PCI: Using configuration type 1 for base access
[    0.501753] bio: create slab <bio-0> at 0
[    0.502700] ACPI: EC: Look up EC in DSDT
[    0.503824] ACPI: Executed 1 blocks of module-level executable AML code
[    0.506850] ACPI: SSDT 00000000bf790200 01238 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.507113] ACPI: Dynamic OEM Table Load:
[    0.507115] ACPI: SSDT           (null) 01238 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.507194] ACPI: SSDT 00000000bf791440 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[    0.507422] ACPI: Dynamic OEM Table Load:
[    0.507424] ACPI: SSDT           (null) 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[    0.507772] ACPI: Interpreter enabled
[    0.507774] ACPI: (supports S0 S3 S4 S5)
[    0.507791] ACPI: Using IOAPIC for interrupt routing
[    0.507809] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.508736] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.530368] ACPI: No dock devices found.
[    0.530370] HEST: Table not found.
[    0.530372] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.530552] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.530708] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.530710] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.530712] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.530713] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.530715] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    0.530717] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[    0.530727] pci 0000:00:00.0: [8086:0040] type 0 class 0x000600
[    0.530741] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.530756] pci 0000:00:01.0: [8086:0041] type 1 class 0x000604
[    0.530776] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.530779] pci 0000:00:01.0: PME# disabled
[    0.530811] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.530837] pci 0000:00:16.0: reg 10: [mem 0xf7ffe000-0xf7ffe00f 64bit]
[    0.530909] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.530913] pci 0000:00:16.0: PME# disabled
[    0.530938] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    0.530956] pci 0000:00:1a.0: reg 10: [mem 0xf7ffc000-0xf7ffc3ff]
[    0.531017] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.531020] pci 0000:00:1a.0: PME# disabled
[    0.531040] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.531052] pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[    0.531096] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.531098] pci 0000:00:1b.0: PME# disabled
[    0.531115] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.531158] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.531161] pci 0000:00:1c.0: PME# disabled
[    0.531178] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    0.531223] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.531226] pci 0000:00:1c.2: PME# disabled
[    0.531251] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    0.531269] pci 0000:00:1d.0: reg 10: [mem 0xf7ff6000-0xf7ff63ff]
[    0.531331] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.531334] pci 0000:00:1d.0: PME# disabled
[    0.531351] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.531396] pci 0000:00:1f.0: [8086:3b06] type 0 class 0x000601
[    0.531490] pci 0000:00:1f.2: [8086:3b20] type 0 class 0x000101
[    0.531502] pci 0000:00:1f.2: reg 10: [io  0xbc00-0xbc07]
[    0.531508] pci 0000:00:1f.2: reg 14: [io  0xb880-0xb883]
[    0.531515] pci 0000:00:1f.2: reg 18: [io  0xb800-0xb807]
[    0.531521] pci 0000:00:1f.2: reg 1c: [io  0xb480-0xb483]
[    0.531527] pci 0000:00:1f.2: reg 20: [io  0xb400-0xb40f]
[    0.531533] pci 0000:00:1f.2: reg 24: [io  0xb080-0xb08f]
[    0.531562] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.531574] pci 0000:00:1f.3: reg 10: [mem 0xf7ff4000-0xf7ff40ff 64bit]
[    0.531591] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.531616] pci 0000:00:1f.5: [8086:3b26] type 0 class 0x000101
[    0.531628] pci 0000:00:1f.5: reg 10: [io  0xac00-0xac07]
[    0.531634] pci 0000:00:1f.5: reg 14: [io  0xa880-0xa883]
[    0.531641] pci 0000:00:1f.5: reg 18: [io  0xa800-0xa807]
[    0.531647] pci 0000:00:1f.5: reg 1c: [io  0xa480-0xa483]
[    0.531653] pci 0000:00:1f.5: reg 20: [io  0xa400-0xa40f]
[    0.531659] pci 0000:00:1f.5: reg 24: [io  0xa080-0xa08f]
[    0.531710] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
[    0.531718] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[    0.531727] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.531736] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.531742] pci 0000:01:00.0: reg 24: [io  0xcc00-0xcc7f]
[    0.531748] pci 0000:01:00.0: reg 30: [mem 0xfbee0000-0xfbefffff pref]
[    0.531787] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.531789] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.531791] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbefffff]
[    0.531794] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.531841] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[    0.531855] pci 0000:02:00.0: reg 10: [io  0xd800-0xd8ff]
[    0.531880] pci 0000:02:00.0: reg 18: [mem 0xf6fff000-0xf6ffffff 64bit pref]
[    0.531897] pci 0000:02:00.0: reg 20: [mem 0xf6ff8000-0xf6ffbfff 64bit pref]
[    0.531907] pci 0000:02:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
[    0.531941] pci 0000:02:00.0: supports D1 D2
[    0.531943] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.531947] pci 0000:02:00.0: PME# disabled
[    0.539754] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.539760] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.539766] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.539774] pci 0000:00:1c.0:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.539842] pci 0000:03:00.0: [197b:2368] type 0 class 0x000101
[    0.539868] pci 0000:03:00.0: reg 10: [io  0xec00-0xec07]
[    0.539881] pci 0000:03:00.0: reg 14: [io  0xe880-0xe883]
[    0.539894] pci 0000:03:00.0: reg 18: [io  0xe800-0xe807]
[    0.539906] pci 0000:03:00.0: reg 1c: [io  0xe480-0xe483]
[    0.539918] pci 0000:03:00.0: reg 20: [io  0xe400-0xe40f]
[    0.539983] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.539992] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.539995] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.539998] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.540002] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.540051] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.540054] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.540057] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.540062] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.540064] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.540066] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.540068] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.540070] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.540072] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.540074] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[    0.540088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.540289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[    0.540340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[    0.540371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT]
[    0.540525]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.540715]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[    0.540717] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.547073] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.547112] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.547148] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.547185] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *6 7 10 11 12 14 15)
[    0.547223] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.547261] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.547300] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.547337] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.547419] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.547421] vgaarb: loaded
[    0.547422] vgaarb: bridge control possible 0000:01:00.0
[    0.547451] PCI: Using ACPI for IRQ routing
[    0.552470] PCI: Discovered peer bus ff
[    0.552496] pci 0000:ff:00.0: [8086:2c61] type 0 class 0x000600
[    0.552512] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    0.552528] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    0.552543] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    0.552557] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    0.552571] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    0.552698] PCI: pci_cache_line_size set to 64 bytes
[    0.552750] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.552752] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff 
[    0.552832] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.552837] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.554845] Switching to clocksource hpet
[    0.555697] Switched to NOHz mode on CPU #0
[    0.555792] Switched to NOHz mode on CPU #3
[    0.555799] Switched to NOHz mode on CPU #1
[    0.555831] Switched to NOHz mode on CPU #2
[    0.556221] pnp: PnP ACPI init
[    0.556233] ACPI: bus type pnp registered
[    0.556315] pnp 00:00: [bus 00-ff]
[    0.556317] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.556319] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.556320] pnp 00:00: [io  0x0d00-0xffff window]
[    0.556322] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.556324] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.556326] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    0.556327] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[    0.556363] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.556372] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[    0.556373] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[    0.556375] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[    0.556376] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.556408] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.556411] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.556413] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.556416] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.556418] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.556448] pnp 00:02: [dma 4]
[    0.556449] pnp 00:02: [io  0x0000-0x000f]
[    0.556451] pnp 00:02: [io  0x0081-0x0083]
[    0.556453] pnp 00:02: [io  0x0087]
[    0.556454] pnp 00:02: [io  0x0089-0x008b]
[    0.556455] pnp 00:02: [io  0x008f]
[    0.556457] pnp 00:02: [io  0x00c0-0x00df]
[    0.556476] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.556485] pnp 00:03: [io  0x0070-0x0071]
[    0.556492] pnp 00:03: [irq 8]
[    0.556510] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.556517] pnp 00:04: [io  0x0061]
[    0.556536] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.556543] pnp 00:05: [io  0x00f0-0x00ff]
[    0.556548] pnp 00:05: [irq 13]
[    0.556566] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.556796] pnp 00:06: [io  0x03f8-0x03ff]
[    0.556801] pnp 00:06: [irq 4]
[    0.556803] pnp 00:06: [dma 0 disabled]
[    0.556851] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.557078] pnp 00:07: [io  0x02f8-0x02ff]
[    0.557083] pnp 00:07: [irq 3]
[    0.557084] pnp 00:07: [dma 0 disabled]
[    0.557152] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.557453] pnp 00:08: [io  0x0378-0x037f]
[    0.557457] pnp 00:08: [irq 7]
[    0.557459] pnp 00:08: [dma 0 disabled]
[    0.557573] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.557597] pnp 00:09: [io  0x0060]
[    0.557599] pnp 00:09: [io  0x0064]
[    0.557603] pnp 00:09: [irq 1]
[    0.557628] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.557667] pnp 00:0a: [irq 12]
[    0.557692] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.557770] pnp 00:0b: [io  0x0000-0xffffffffffffffff disabled]
[    0.557772] pnp 00:0b: [io  0x0a00-0x0adf]
[    0.557774] pnp 00:0b: [io  0x0ae0-0x0aef]
[    0.557808] system 00:0b: [io  0x0a00-0x0adf] has been reserved
[    0.557810] system 00:0b: [io  0x0ae0-0x0aef] has been reserved
[    0.557813] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.557914] pnp 00:0c: [io  0x0010-0x001f]
[    0.557916] pnp 00:0c: [io  0x0022-0x002d]
[    0.557917] pnp 00:0c: [io  0x0030-0x003f]
[    0.557919] pnp 00:0c: [io  0x0044-0x005f]
[    0.557920] pnp 00:0c: [io  0x0062-0x0063]
[    0.557921] pnp 00:0c: [io  0x0065-0x006f]
[    0.557923] pnp 00:0c: [io  0x0072-0x007f]
[    0.557924] pnp 00:0c: [io  0x0080]
[    0.557925] pnp 00:0c: [io  0x0084-0x0086]
[    0.557927] pnp 00:0c: [io  0x0088]
[    0.557928] pnp 00:0c: [io  0x008c-0x008e]
[    0.557930] pnp 00:0c: [io  0x0090-0x009f]
[    0.557932] pnp 00:0c: [io  0x00a2-0x00bf]
[    0.557933] pnp 00:0c: [io  0x00e0-0x00ef]
[    0.557935] pnp 00:0c: [io  0x04d0-0x04d1]
[    0.557936] pnp 00:0c: [io  0x0800-0x087f]
[    0.557938] pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
[    0.557939] pnp 00:0c: [io  0x0500-0x057f]
[    0.557941] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[    0.557942] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[    0.557944] pnp 00:0c: [mem 0xfed45000-0xfed89fff]
[    0.557945] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[    0.557947] pnp 00:0c: [mem 0xfed40000-0xfed8ffff]
[    0.557996] system 00:0c: [io  0x04d0-0x04d1] has been reserved
[    0.557999] system 00:0c: [io  0x0800-0x087f] has been reserved
[    0.558001] system 00:0c: [io  0x0500-0x057f] has been reserved
[    0.558003] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.558005] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.558008] system 00:0c: [mem 0xfed45000-0xfed89fff] has been reserved
[    0.558010] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.558012] system 00:0c: [mem 0xfed40000-0xfed8ffff] could not be reserved
[    0.558014] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.558064] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[    0.558089] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.558161] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[    0.558163] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[    0.558196] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.558199] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.558201] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.558239] pnp 00:0f: [mem 0xe0000000-0xefffffff]
[    0.558272] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[    0.558274] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.558462] pnp 00:10: [mem 0x00000000-0x0009ffff]
[    0.558464] pnp 00:10: [mem 0x000c0000-0x000cffff]
[    0.558465] pnp 00:10: [mem 0x000e0000-0x000fffff]
[    0.558467] pnp 00:10: [mem 0x00100000-0xbfffffff]
[    0.558468] pnp 00:10: [mem 0xfed90000-0xffffffff]
[    0.558515] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.558517] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.558519] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.558521] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.558524] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.558526] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.558634] pnp: PnP ACPI: found 17 devices
[    0.558635] ACPI: ACPI bus type pnp unregistered
[    0.564823] PCI: max bus depth: 1 pci_try_num: 2
[    0.564846] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.564849] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.564851] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.564853] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.564855] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbefffff]
[    0.564858] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.564861] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.564863] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.564867] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.564870] pci 0000:00:1c.0:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.564875] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.564877] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.564880] pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.564884] pci 0000:00:1c.2:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.564888] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.564889] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.564893] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.564896] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.564909] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.564912] pci 0000:00:01.0: setting latency timer to 64
[    0.564920] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.564923] pci 0000:00:1c.0: setting latency timer to 64
[    0.564927] pci 0000:00:1c.2: enabling device (0105 -> 0107)
[    0.564934] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.564937] pci 0000:00:1c.2: setting latency timer to 64
[    0.564941] pci 0000:00:1e.0: setting latency timer to 64
[    0.564944] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.564946] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.564947] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.564949] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.564951] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.564952] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.564954] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.564955] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff]
[    0.564957] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.564959] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.564961] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.564962] pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.564964] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.564965] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.564967] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.564969] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.564970] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.564972] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.564974] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.564975] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.564977] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.564978] pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
[    0.564980] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[    0.565035] NET: Registered protocol family 2
[    0.565154] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.565936] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.568086] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.568342] TCP: Hash tables configured (established 524288 bind 65536)
[    0.568343] TCP reno registered
[    0.568351] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.568381] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.568513] NET: Registered protocol family 1
[    0.568594] pci 0000:01:00.0: Boot video device
[    0.568609] PCI: CLS 32 bytes, default 64
[    0.568645] Unpacking initramfs...
[    0.758964] Freeing initrd memory: 11160k freed
[    0.760900] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.760905] Placing 64MB software IO TLB between ffff8800bb77b000 - ffff8800bf77b000
[    0.760907] software IO TLB at phys 0xbb77b000 - 0xbf77b000
[    0.761416] audit: initializing netlink socket (disabled)
[    0.761425] type=2000 audit(1311695234.588:1): initialized
[    0.778673] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.791288] VFS: Disk quotas dquot_6.5.2
[    0.791316] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.791381] msgmni has been set to 7658
[    0.791509] alg: No test for stdrng (krng)
[    0.791539] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.791542] io scheduler noop registered
[    0.791543] io scheduler deadline registered
[    0.791559] io scheduler cfq registered (default)
[    0.791639] pcieport 0000:00:01.0: setting latency timer to 64
[    0.791663] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.791815] vesafb: mode is 1680x1050x32, linelength=6720, pages=0
[    0.791817] vesafb: scrolling: redraw
[    0.791818] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.792337] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011100000, using 6912k, total 6912k
[    0.973141] Console: switching to colour frame buffer device 210x65
[    1.156123] fb0: VESA VGA frame buffer device
[    1.156153] ERST: Table is not found!
[    1.156209] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.176513] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.237299] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.337209] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.392949] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.424705] Linux agpgart interface v0.103
[    1.424864] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.425192] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.425198] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.425318] mousedev: PS/2 mouse device common for all mice
[    1.425343] rtc_cmos 00:03: RTC can wake from S4
[    1.425439] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.425463] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.425472] cpuidle: using governor ladder
[    1.425473] cpuidle: using governor menu
[    1.425619] TCP cubic registered
[    1.425664] NET: Registered protocol family 10
[    1.426012] Mobile IPv6
[    1.426015] NET: Registered protocol family 17
[    1.426018] Registering the dns_resolver key type
[    1.426128] PM: Hibernation image not present or could not be loaded.
[    1.426137] registered taskstats version 1
[    1.432626] rtc_cmos 00:03: setting system clock to 2011-07-26 15:47:15 UTC (1311695235)
[    1.432653] Initializing network drop monitor service
[    1.433632] Freeing unused kernel memory: 552k freed
[    1.433699] Write protecting the kernel read-only data: 6144k
[    1.436114] Freeing unused kernel memory: 816k freed
[    1.438415] Freeing unused kernel memory: 760k freed
[    1.445373] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.512836] udevd[60]: starting version 172
[    1.531103] SCSI subsystem initialized
[    1.531863] usbcore: registered new interface driver usbfs
[    1.531887] usbcore: registered new interface driver hub
[    1.537534] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.537558] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.537590] r8169 0000:02:00.0: setting latency timer to 64
[    1.537642] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[    1.538049] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000064a000, 40:61:86:63:b8:90, XID 081000c0 IRQ 41
[    1.541212] usbcore: registered new device driver usb
[    1.541657] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.541687] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.541710] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.541714] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.541740] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.541774] ehci_hcd 0000:00:1a.0: debug port 2
[    1.545709] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    1.546624] libata version 3.00 loaded.
[    1.550221] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.550252] pata_jmicron 0000:03:00.0: setting latency timer to 64
[    1.550774] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7ffc000
[    1.554688] scsi0 : pata_jmicron
[    1.555047] scsi1 : pata_jmicron
[    1.555453] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 18
[    1.555456] ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 18
[    1.564055] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.564081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.564084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.564086] usb usb1: Product: EHCI Host Controller
[    1.564088] usb usb1: Manufacturer: Linux 3.0.0-git5 ehci_hcd
[    1.564090] usb usb1: SerialNumber: 0000:00:1a.0
[    1.564315] hub 1-0:1.0: USB hub found
[    1.564320] hub 1-0:1.0: 2 ports detected
[    1.564395] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.564422] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.564425] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.564432] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.564459] ehci_hcd 0000:00:1d.0: debug port 2
[    1.568389] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    1.568408] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7ff6000
[    1.584036] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.584067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.584072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.584076] usb usb2: Product: EHCI Host Controller
[    1.584082] usb usb2: Manufacturer: Linux 3.0.0-git5 ehci_hcd
[    1.584084] usb usb2: SerialNumber: 0000:00:1d.0
[    1.584152] hub 2-0:1.0: USB hub found
[    1.584155] hub 2-0:1.0: 2 ports detected
[    1.584203] ata_piix 0000:00:1f.2: version 2.13
[    1.584217] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.584221] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.584250] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.584457] scsi2 : ata_piix
[    1.584508] scsi3 : ata_piix
[    1.585660] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[    1.585664] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[    1.585683] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.585687] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.585710] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.585866] scsi4 : ata_piix
[    1.585913] scsi5 : ata_piix
[    1.586745] ata5: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
[    1.586748] ata6: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
[    1.755532] Refined TSC clocksource calibration: 2926.000 MHz.
[    1.755539] Switching to clocksource tsc
[    1.875193] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    1.913697] ata5: SATA link down (SStatus 0 SControl 300)
[    1.924279] ata6: SATA link down (SStatus 0 SControl 300)
[    2.007226] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    2.007231] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.007492] hub 1-1:1.0: USB hub found
[    2.007590] hub 1-1:1.0: 6 ports detected
[    2.118523] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    2.250551] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.250557] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.250856] hub 2-1:1.0: USB hub found
[    2.250926] hub 2-1:1.0: 8 ports detected
[    2.377851] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.377867] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.385936] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.385946] ata4.01: SATA link down (SStatus 0 SControl 300)
[    2.394142] ata4.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[    2.394147] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.410033] ata4.00: configured for UDMA/133
[    2.441850] ata3.00: HPA detected: current 312579695, native 312581808
[    2.441858] ata3.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
[    2.441862] ata3.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.441872] ata3.01: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100
[    2.516609] ata3.00: configured for UDMA/133
[    2.529494] ata3.01: configured for UDMA/100
[    2.529999] scsi 2:0:0:0: Direct-Access     ATA      ST3160815AS      3.AA PQ: 0 ANSI: 5
[    2.530994] scsi 2:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-S203P  SB00 PQ: 0 ANSI: 5
[    2.531184] scsi 3:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[    2.535106] sd 2:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[    2.535157] sd 2:0:0:0: [sda] Write Protect is off
[    2.535160] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.535172] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.535182] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.535219] sd 3:0:0:0: [sdb] Write Protect is off
[    2.535222] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.535252] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.537126]  sdb: sdb1
[    2.537331] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.558394] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.558440] scsi 2:0:1:0: Attached scsi generic sg1 type 5
[    2.558483] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    2.564673]  sda: sda1 sda2
[    2.564902] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.568258] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.568260] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.568399] sr 2:0:1:0: Attached scsi CD-ROM sr0
[    3.136187] device-mapper: uevent: version 1.0.3
[    3.136258] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[   16.711220] Intel AES-NI instructions are not detected.
[   17.497969] PM: Starting manual resume from disk
[   17.497972] PM: Hibernation image partition 254:1 present
[   17.497973] PM: Looking for hibernation image.
[   17.498191] PM: Image not found (code -22)
[   17.498192] PM: Hibernation image not present or could not be loaded.
[   17.500731] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[   17.500735] PM: Marking nosave pages: 00000000bf780000 - 0000000100000000
[   17.501656] PM: Basic memory bitmaps created
[   17.514234] PM: Basic memory bitmaps freed
[   17.552763] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   19.228540] udevd[374]: starting version 172
[   20.069794] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[   20.069800] ACPI: Power Button [PWRB]
[   20.069840] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   20.069843] ACPI: Power Button [PWRF]
[   20.326158] ACPI: acpi_idle registered with cpuidle
[   20.326496] Monitor-Mwait will be used to enter C-1 state
[   20.326521] Monitor-Mwait will be used to enter C-3 state
[   20.326542] Monitor-Mwait will be used to enter C-3 state
[   20.444551] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   20.474129] wmi: Mapper loaded
[   20.533664] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   20.562803] parport_pc 00:08: reported by Plug and Play ACPI
[   20.562854] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   20.584850] [drm] Initialized drm 1.1.0 20060810
[   21.072779] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.072788] nouveau 0000:01:00.0: setting latency timer to 64
[   21.073907] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084200a2)
[   21.073913] checking generic (f9000000 6c0000) vs hw (d0000000 10000000)
[   21.073917] checking generic (f9000000 6c0000) vs hw (f8000000 2000000)
[   21.073921] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   21.074006] Console: switching to colour dummy device 80x25
[   21.079223] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[   21.102326] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[   21.127313] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   21.127320] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   21.127325] [drm] nouveau 0000:01:00.0: Bios version 60.84.5e.00
[   21.127330] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   21.127334] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[   21.127339] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
[   21.127344] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000030
[   21.127347] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[   21.127351] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
[   21.127355] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
[   21.127360] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[   21.127365] [drm] nouveau 0000:01:00.0:   0: 0x00002030: type 0x30 idx 0 tag 0x08
[   21.127370] [drm] nouveau 0000:01:00.0:   1: 0x00001130: type 0x30 idx 1 tag 0x07
[   21.127374] [drm] nouveau 0000:01:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[   21.127379] [drm] nouveau 0000:01:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
[   21.127383] [drm] nouveau 0000:01:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
[   21.127389] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC474
[   21.150362] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC7F8
[   21.167029] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD248
[   21.167039] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD33A
[   21.168108] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD56D
[   21.168112] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD5D2
[   21.187906] [drm] nouveau 0000:01:00.0: 0xD5D2: Condition still not met after 20ms, skipping following opcodes
[   21.187936] [drm] nouveau 0000:01:00.0: timingset 255 does not exist
[   21.206549] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[   21.206557] [drm] nouveau 0000:01:00.0: 0: memory 720MHz core 600MHz shader 1450MHz fanspeed 100%
[   21.206575] [drm] nouveau 0000:01:00.0: c: memory 702MHz core 540MHz shader 1188MHz voltage 1320mV
[   21.206855] [TTM] Zone  kernel: Available graphics memory: 1961734 kiB.
[   21.206860] [TTM] Initializing pool allocator.
[   21.206884] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[   21.206895] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   21.211249] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   21.290729] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[   21.290732] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[   21.292754] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   21.292759] [drm] No driver support for vblank timestamp query.
[   21.470681] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x40000000, bo ffff880130085400
[   21.470880] fbcon: nouveaufb (fb0) is primary device
[   21.510352] Console: switching to colour frame buffer device 210x65
[   21.511734] fb0: nouveaufb frame buffer device
[   21.511736] drm: registered panic notifier
[   21.511743] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   21.648981] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   21.649041] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   21.649071] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   21.834375] hda_codec: ALC889: BIOS auto-probing.
[   21.872267] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0
[   21.872643] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[   21.872979] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[   21.880265] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   21.880335] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   21.880389] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   21.880441] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   23.567666] EXT4-fs (dm-2): re-mounted. Opts: (null)
[   23.806947] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[   37.620490] loop: module loaded
[   37.699826] coretemp coretemp.0: TjMax is 105 C.
[   37.699838] coretemp coretemp.0: TjMax is 105 C.
[   37.807892] f71882fg: Found f71889fg chip at 0xa00, revision 21
[   37.808094] f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode
[   37.808097] f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode
[   37.808099] f71882fg f71882fg.2560: Fan: 3 is in duty-cycle mode
[   38.309800] Adding 7811068k swap on /dev/mapper/hermione-swap.  Priority:-1 extents:1 across:7811068k 
[   39.098007] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   39.167663] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[   39.255359] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[   39.324470] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[   40.594530] fuse init (API version 7.16)
[   44.108715] r8169 0000:02:00.0: eth0: link down
[   44.108725] r8169 0000:02:00.0: eth0: link down
[   44.109162] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   45.895886] r8169 0000:02:00.0: eth0: link up
[   45.896615] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   51.826814] Bluetooth: Core ver 2.16
[   51.826832] NET: Registered protocol family 31
[   51.826834] Bluetooth: HCI device and connection manager initialized
[   51.826837] Bluetooth: HCI socket layer initialized
[   51.826839] Bluetooth: L2CAP socket layer initialized
[   51.826844] Bluetooth: SCO socket layer initialized
[   51.879258] Bluetooth: RFCOMM TTY layer initialized
[   51.879269] Bluetooth: RFCOMM socket layer initialized
[   51.879273] Bluetooth: RFCOMM ver 1.11
[   51.889525] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   51.889530] Bluetooth: BNEP filters: protocol multicast
[   52.697187] lp0: using parport0 (interrupt-driven).
[   52.898828] ppdev: user-space parallel port driver
[   56.763307] eth0: no IPv6 routers present
[   94.867610] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=0
[   94.871454] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[   94.946525] EXT4-fs (dm-5): re-mounted. Opts: commit=0
[   95.002362] EXT4-fs (dm-6): re-mounted. Opts: commit=0
[   95.030531] EXT4-fs (dm-7): re-mounted. Opts: commit=0
[  107.045427] hda-intel: Invalid position buffer, using LPIB read method instead.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-git5 (ban@Hermione) (gcc version 4.6.1 (Debian 4.6.1-5) ) #6 SMP Tue Jul 26 17:56:00 CEST 2011
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-git5 root=/dev/mapper/hermione-debian ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[    0.000000]  BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: MSI MS-7636/H55M-E33(MS-7636)   , BIOS V1.1 11/23/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E3FFF write-protect
[    0.000000]   E4000-E7FFF write-through
[    0.000000]   E8000-EBFFF write-protect
[    0.000000]   EC000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 13C000000 mask FFC000000 uncachable
[    0.000000]   1 base 000000000 mask F00000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[    0.000000]  0000000000 - 00bf600000 page 2M
[    0.000000]  00bf600000 - 00bf780000 page 4k
[    0.000000] kernel direct mapping tables up to bf780000 @ bf77b000-bf780000
[    0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[    0.000000]  0100000000 - 0138000000 page 2M
[    0.000000] kernel direct mapping tables up to 138000000 @ 137ffa000-138000000
[    0.000000] RAMDISK: 36a26000 - 3750b000
[    0.000000] ACPI: RSDP 00000000000f9f00 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000bf780000 00044 (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bf780200 00084 (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bf7805e0 07303 (v01  A7636 A7636100 00000100 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bf78e000 00040
[    0.000000] ACPI: APIC 00000000bf780390 0008C (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bf780420 0003C (v01 7636MS OEMMCFG  20091123 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bf78e040 00072 (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bf78a5e0 00038 (v01 7636MS OEMHPET  20091123 MSFT 00000097)
[    0.000000] ACPI: GSCI 00000000bf78e0c0 02024 (v01 7636MS GMCHSCI  20091123 MSFT 00000097)
[    0.000000] ACPI: DMAR 00000000bf7900f0 00108 (v01    AMI  OEMDMAR 00000001 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bf791940 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000138000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[    0.000000]   NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880133800000-ffff880136ffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00138000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bf780
[    0.000000]     0: 0x00100000 -> 0x00138000
[    0.000000] On node 0 totalpages: 1013519
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 765880 pages, LIFO batch:31
[    0.000000]   Normal zone: 3136 pages used for memmap
[    0.000000]   Normal zone: 226240 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
[    0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000
[    0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
[    0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000
[    0.000000] PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s80896 r8192 d21504 u262144
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 996042
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-git5 root=/dev/mapper/hermione-debian ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at drivers/iommu/dmar.c:634 warn_invalid_dmar+0x77/0x85()
[    0.000000] Hardware name: MS-7636
[    0.000000] Your BIOS is broken; DMAR reported at address fed93000 returns all ones!
[    0.000000] BIOS vendor: American Megatrends Inc.; Ver: V1.1; Product Version: 1.0
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 3.0.0-git5 #6
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff810457b5>] ? warn_slowpath_common+0x78/0x8c
[    0.000000]  [<ffffffff81045817>] ? warn_slowpath_fmt_taint+0x3d/0x42
[    0.000000]  [<ffffffff8131f8b6>] ? __pte+0x7/0x8
[    0.000000]  [<ffffffff816b6839>] ? __early_set_fixmap+0x89/0x8d
[    0.000000]  [<ffffffff8131f8b6>] ? __pte+0x7/0x8
[    0.000000]  [<ffffffff816b6839>] ? __early_set_fixmap+0x89/0x8d
[    0.000000]  [<ffffffff8131f8b6>] ? __pte+0x7/0x8
[    0.000000]  [<ffffffff81251c9d>] ? warn_invalid_dmar+0x77/0x85
[    0.000000]  [<ffffffff816b6c46>] ? early_iounmap+0xc5/0x114
[    0.000000]  [<ffffffff816d5fb8>] ? check_zero_address+0xb0/0xeb
[    0.000000]  [<ffffffff8132f846>] ? bad_to_user+0x620/0x620
[    0.000000]  [<ffffffff816d6004>] ? detect_intel_iommu+0x11/0xa6
[    0.000000]  [<ffffffff816aac9d>] ? pci_iommu_alloc+0x3f/0x67
[    0.000000]  [<ffffffff816b6618>] ? mem_init+0x14/0xe5
[    0.000000]  [<ffffffff816a494e>] ? start_kernel+0x1d0/0x3c8
[    0.000000]  [<ffffffff816a4140>] ? early_idt_handlers+0x140/0x140
[    0.000000]  [<ffffffff816a43c4>] ? x86_64_start_kernel+0x104/0x111
[    0.000000] ---[ end trace a7919e7f17c0a725 ]---
[    0.000000] Disabling lock debugging due to kernel taint
[    0.000000] Memory: 3910184k/5111808k available (3262k kernel code, 1057732k absent, 143892k reserved, 3447k data, 552k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 32505856 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2926.272 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5852.54 BogoMIPS (lpj=11705088)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000056] Security Framework initialized
[    0.000060] SELinux:  Disabled at boot.
[    0.000389] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001312] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001675] Mount-cache hash table entries: 256
[    0.001789] Initializing cgroup subsys cpuacct
[    0.001794] Initializing cgroup subsys memory
[    0.001805] Initializing cgroup subsys devices
[    0.001808] Initializing cgroup subsys freezer
[    0.001810] Initializing cgroup subsys net_cls
[    0.001812] Initializing cgroup subsys blkio
[    0.001841] CPU: Physical Processor ID: 0
[    0.001842] CPU: Processor Core ID: 0
[    0.001848] mce: CPU supports 9 MCE banks
[    0.001858] CPU0: Thermal monitoring enabled (TM1)
[    0.001866] using mwait in idle threads.
[    0.002234] ACPI: Core revision 20110413
[    0.028421] DMAR: Host address width 36
[    0.028423] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.028430] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[    0.028432] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.028440] DMAR: parse DMAR table failure.
[    0.028759] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068337] CPU0: Intel(R) Core(TM) i3 CPU         530  @ 2.93GHz stepping 02
[    0.172758] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.172765] ... version:                3
[    0.172766] ... bit width:              48
[    0.172767] ... generic registers:      4
[    0.172769] ... value mask:             0000ffffffffffff
[    0.172770] ... max period:             000000007fffffff
[    0.172771] ... fixed-purpose events:   3
[    0.172772] ... event mask:             000000070000000f
[    0.172975] NMI watchdog enabled, takes one hw-pmu counter.
[    0.173085] Booting Node   0, Processors  #1
[    0.173087] smpboot cpu 1: start_ip = 9a000
[    0.280579] NMI watchdog enabled, takes one hw-pmu counter.
[    0.280699]  #2
[    0.280701] smpboot cpu 2: start_ip = 9a000
[    0.388315] NMI watchdog enabled, takes one hw-pmu counter.
[    0.388426]  #3
[    0.388428] smpboot cpu 3: start_ip = 9a000
[    0.495982] NMI watchdog enabled, takes one hw-pmu counter.
[    0.496018] Brought up 4 CPUs
[    0.496020] Total of 4 processors activated (23408.15 BogoMIPS).
[    0.497894] devtmpfs: initialized
[    0.501042] PM: Registering ACPI NVS region at bf78e000 (270336 bytes)
[    0.501160] print_constraints: dummy: 
[    0.501208] NET: Registered protocol family 16
[    0.501289] ACPI: bus type pci registered
[    0.501340] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.501342] PCI: not using MMCONFIG
[    0.501344] PCI: Using configuration type 1 for base access
[    0.501763] bio: create slab <bio-0> at 0
[    0.502695] ACPI: EC: Look up EC in DSDT
[    0.503818] ACPI: Executed 1 blocks of module-level executable AML code
[    0.506840] ACPI: SSDT 00000000bf790200 01238 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.507101] ACPI: Dynamic OEM Table Load:
[    0.507103] ACPI: SSDT           (null) 01238 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.507183] ACPI: SSDT 00000000bf791440 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[    0.507411] ACPI: Dynamic OEM Table Load:
[    0.507413] ACPI: SSDT           (null) 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[    0.507761] ACPI: Interpreter enabled
[    0.507763] ACPI: (supports S0 S3 S4 S5)
[    0.507780] ACPI: Using IOAPIC for interrupt routing
[    0.507797] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.508726] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.530015] ACPI: No dock devices found.
[    0.530016] HEST: Table not found.
[    0.530019] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.530199] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.530355] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.530357] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.530359] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.530360] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.530362] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    0.530364] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[    0.530374] pci 0000:00:00.0: [8086:0040] type 0 class 0x000600
[    0.530388] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.530403] pci 0000:00:01.0: [8086:0041] type 1 class 0x000604
[    0.530423] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.530426] pci 0000:00:01.0: PME# disabled
[    0.530458] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.530485] pci 0000:00:16.0: reg 10: [mem 0xf7ffe000-0xf7ffe00f 64bit]
[    0.530556] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.530560] pci 0000:00:16.0: PME# disabled
[    0.530586] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    0.530604] pci 0000:00:1a.0: reg 10: [mem 0xf7ffc000-0xf7ffc3ff]
[    0.530665] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.530668] pci 0000:00:1a.0: PME# disabled
[    0.530688] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.530700] pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[    0.530744] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.530747] pci 0000:00:1b.0: PME# disabled
[    0.530762] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.530806] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.530809] pci 0000:00:1c.0: PME# disabled
[    0.530826] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    0.530869] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.530872] pci 0000:00:1c.2: PME# disabled
[    0.530896] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    0.530914] pci 0000:00:1d.0: reg 10: [mem 0xf7ff6000-0xf7ff63ff]
[    0.530976] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.530979] pci 0000:00:1d.0: PME# disabled
[    0.530995] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.531042] pci 0000:00:1f.0: [8086:3b06] type 0 class 0x000601
[    0.531137] pci 0000:00:1f.2: [8086:3b20] type 0 class 0x000101
[    0.531149] pci 0000:00:1f.2: reg 10: [io  0xbc00-0xbc07]
[    0.531155] pci 0000:00:1f.2: reg 14: [io  0xb880-0xb883]
[    0.531162] pci 0000:00:1f.2: reg 18: [io  0xb800-0xb807]
[    0.531168] pci 0000:00:1f.2: reg 1c: [io  0xb480-0xb483]
[    0.531175] pci 0000:00:1f.2: reg 20: [io  0xb400-0xb40f]
[    0.531181] pci 0000:00:1f.2: reg 24: [io  0xb080-0xb08f]
[    0.531209] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.531221] pci 0000:00:1f.3: reg 10: [mem 0xf7ff4000-0xf7ff40ff 64bit]
[    0.531238] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.531263] pci 0000:00:1f.5: [8086:3b26] type 0 class 0x000101
[    0.531275] pci 0000:00:1f.5: reg 10: [io  0xac00-0xac07]
[    0.531282] pci 0000:00:1f.5: reg 14: [io  0xa880-0xa883]
[    0.531288] pci 0000:00:1f.5: reg 18: [io  0xa800-0xa807]
[    0.531295] pci 0000:00:1f.5: reg 1c: [io  0xa480-0xa483]
[    0.531301] pci 0000:00:1f.5: reg 20: [io  0xa400-0xa40f]
[    0.531307] pci 0000:00:1f.5: reg 24: [io  0xa080-0xa08f]
[    0.531359] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
[    0.531367] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[    0.531376] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.531384] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.531390] pci 0000:01:00.0: reg 24: [io  0xcc00-0xcc7f]
[    0.531396] pci 0000:01:00.0: reg 30: [mem 0xfbee0000-0xfbefffff pref]
[    0.531431] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.531433] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.531435] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbefffff]
[    0.531438] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.531484] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[    0.531499] pci 0000:02:00.0: reg 10: [io  0xd800-0xd8ff]
[    0.531523] pci 0000:02:00.0: reg 18: [mem 0xf6fff000-0xf6ffffff 64bit pref]
[    0.531539] pci 0000:02:00.0: reg 20: [mem 0xf6ff8000-0xf6ffbfff 64bit pref]
[    0.531550] pci 0000:02:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
[    0.531584] pci 0000:02:00.0: supports D1 D2
[    0.531585] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.531589] pci 0000:02:00.0: PME# disabled
[    0.535763] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.535769] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.535775] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.535783] pci 0000:00:1c.0:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.535851] pci 0000:03:00.0: [197b:2368] type 0 class 0x000101
[    0.535878] pci 0000:03:00.0: reg 10: [io  0xec00-0xec07]
[    0.535890] pci 0000:03:00.0: reg 14: [io  0xe880-0xe883]
[    0.535903] pci 0000:03:00.0: reg 18: [io  0xe800-0xe807]
[    0.535915] pci 0000:03:00.0: reg 1c: [io  0xe480-0xe483]
[    0.535928] pci 0000:03:00.0: reg 20: [io  0xe400-0xe40f]
[    0.535993] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.536001] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.536004] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.536007] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.536012] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.536061] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.536064] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.536067] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.536072] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.536074] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.536076] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.536078] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.536080] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.536082] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.536084] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[    0.536097] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.536298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[    0.536349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[    0.536381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT]
[    0.536535]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.536725]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[    0.536726] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.543073] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.543112] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.543148] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.543186] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *6 7 10 11 12 14 15)
[    0.543223] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.543262] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.543300] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.543338] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.543419] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.543421] vgaarb: loaded
[    0.543422] vgaarb: bridge control possible 0000:01:00.0
[    0.543451] PCI: Using ACPI for IRQ routing
[    0.548469] PCI: Discovered peer bus ff
[    0.548496] pci 0000:ff:00.0: [8086:2c61] type 0 class 0x000600
[    0.548511] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    0.548527] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    0.548543] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    0.548556] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    0.548570] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    0.548698] PCI: pci_cache_line_size set to 64 bytes
[    0.548749] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.548752] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff 
[    0.548833] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.548837] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.550845] Switching to clocksource hpet
[    0.551706] Switched to NOHz mode on CPU #0
[    0.551809] Switched to NOHz mode on CPU #1
[    0.551820] Switched to NOHz mode on CPU #3
[    0.551852] Switched to NOHz mode on CPU #2
[    0.552226] pnp: PnP ACPI init
[    0.552238] ACPI: bus type pnp registered
[    0.552320] pnp 00:00: [bus 00-ff]
[    0.552322] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.552324] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.552326] pnp 00:00: [io  0x0d00-0xffff window]
[    0.552327] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.552329] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.552331] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    0.552333] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[    0.552368] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.552377] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[    0.552378] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[    0.552380] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[    0.552381] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.552413] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.552416] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.552418] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.552420] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.552423] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.552453] pnp 00:02: [dma 4]
[    0.552454] pnp 00:02: [io  0x0000-0x000f]
[    0.552456] pnp 00:02: [io  0x0081-0x0083]
[    0.552458] pnp 00:02: [io  0x0087]
[    0.552459] pnp 00:02: [io  0x0089-0x008b]
[    0.552460] pnp 00:02: [io  0x008f]
[    0.552462] pnp 00:02: [io  0x00c0-0x00df]
[    0.552481] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.552490] pnp 00:03: [io  0x0070-0x0071]
[    0.552497] pnp 00:03: [irq 8]
[    0.552515] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.552522] pnp 00:04: [io  0x0061]
[    0.552541] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.552548] pnp 00:05: [io  0x00f0-0x00ff]
[    0.552553] pnp 00:05: [irq 13]
[    0.552570] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.552801] pnp 00:06: [io  0x03f8-0x03ff]
[    0.552806] pnp 00:06: [irq 4]
[    0.552807] pnp 00:06: [dma 0 disabled]
[    0.552855] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.553083] pnp 00:07: [io  0x02f8-0x02ff]
[    0.553088] pnp 00:07: [irq 3]
[    0.553090] pnp 00:07: [dma 0 disabled]
[    0.553157] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.553458] pnp 00:08: [io  0x0378-0x037f]
[    0.553462] pnp 00:08: [irq 7]
[    0.553464] pnp 00:08: [dma 0 disabled]
[    0.553578] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.553602] pnp 00:09: [io  0x0060]
[    0.553604] pnp 00:09: [io  0x0064]
[    0.553608] pnp 00:09: [irq 1]
[    0.553633] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.553672] pnp 00:0a: [irq 12]
[    0.553696] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.553775] pnp 00:0b: [io  0x0000-0xffffffffffffffff disabled]
[    0.553777] pnp 00:0b: [io  0x0a00-0x0adf]
[    0.553778] pnp 00:0b: [io  0x0ae0-0x0aef]
[    0.553813] system 00:0b: [io  0x0a00-0x0adf] has been reserved
[    0.553815] system 00:0b: [io  0x0ae0-0x0aef] has been reserved
[    0.553817] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.553919] pnp 00:0c: [io  0x0010-0x001f]
[    0.553921] pnp 00:0c: [io  0x0022-0x002d]
[    0.553922] pnp 00:0c: [io  0x0030-0x003f]
[    0.553924] pnp 00:0c: [io  0x0044-0x005f]
[    0.553925] pnp 00:0c: [io  0x0062-0x0063]
[    0.553927] pnp 00:0c: [io  0x0065-0x006f]
[    0.553928] pnp 00:0c: [io  0x0072-0x007f]
[    0.553929] pnp 00:0c: [io  0x0080]
[    0.553931] pnp 00:0c: [io  0x0084-0x0086]
[    0.553932] pnp 00:0c: [io  0x0088]
[    0.553933] pnp 00:0c: [io  0x008c-0x008e]
[    0.553935] pnp 00:0c: [io  0x0090-0x009f]
[    0.553937] pnp 00:0c: [io  0x00a2-0x00bf]
[    0.553939] pnp 00:0c: [io  0x00e0-0x00ef]
[    0.553940] pnp 00:0c: [io  0x04d0-0x04d1]
[    0.553941] pnp 00:0c: [io  0x0800-0x087f]
[    0.553943] pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
[    0.553944] pnp 00:0c: [io  0x0500-0x057f]
[    0.553946] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[    0.553948] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[    0.553949] pnp 00:0c: [mem 0xfed45000-0xfed89fff]
[    0.553950] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[    0.553952] pnp 00:0c: [mem 0xfed40000-0xfed8ffff]
[    0.554001] system 00:0c: [io  0x04d0-0x04d1] has been reserved
[    0.554004] system 00:0c: [io  0x0800-0x087f] has been reserved
[    0.554006] system 00:0c: [io  0x0500-0x057f] has been reserved
[    0.554008] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.554010] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.554013] system 00:0c: [mem 0xfed45000-0xfed89fff] has been reserved
[    0.554015] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.554017] system 00:0c: [mem 0xfed40000-0xfed8ffff] could not be reserved
[    0.554019] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.554070] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[    0.554095] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.554167] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[    0.554169] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[    0.554202] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.554204] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.554207] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.554245] pnp 00:0f: [mem 0xe0000000-0xefffffff]
[    0.554277] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[    0.554280] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.554467] pnp 00:10: [mem 0x00000000-0x0009ffff]
[    0.554469] pnp 00:10: [mem 0x000c0000-0x000cffff]
[    0.554471] pnp 00:10: [mem 0x000e0000-0x000fffff]
[    0.554472] pnp 00:10: [mem 0x00100000-0xbfffffff]
[    0.554474] pnp 00:10: [mem 0xfed90000-0xffffffff]
[    0.554520] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.554522] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.554524] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.554527] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.554529] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.554531] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.554640] pnp: PnP ACPI: found 17 devices
[    0.554641] ACPI: ACPI bus type pnp unregistered
[    0.560834] PCI: max bus depth: 1 pci_try_num: 2
[    0.560857] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.560860] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.560862] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.560864] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.560867] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbefffff]
[    0.560869] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.560872] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.560874] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.560878] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.560881] pci 0000:00:1c.0:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.560886] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.560888] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.560892] pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.560895] pci 0000:00:1c.2:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.560900] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.560901] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.560904] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.560907] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.560920] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.560923] pci 0000:00:01.0: setting latency timer to 64
[    0.560931] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.560934] pci 0000:00:1c.0: setting latency timer to 64
[    0.560938] pci 0000:00:1c.2: enabling device (0105 -> 0107)
[    0.560945] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.560948] pci 0000:00:1c.2: setting latency timer to 64
[    0.560952] pci 0000:00:1e.0: setting latency timer to 64
[    0.560955] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.560957] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.560958] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.560960] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.560962] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.560963] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.560965] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.560967] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff]
[    0.560968] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.560970] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.560972] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.560973] pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.560975] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.560977] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.560978] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.560980] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.560982] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.560983] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.560985] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.560986] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.560988] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.560990] pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
[    0.560991] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[    0.561046] NET: Registered protocol family 2
[    0.561164] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.561946] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.564092] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.564348] TCP: Hash tables configured (established 524288 bind 65536)
[    0.564350] TCP reno registered
[    0.564358] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.564388] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.564521] NET: Registered protocol family 1
[    0.564600] pci 0000:01:00.0: Boot video device
[    0.564615] PCI: CLS 32 bytes, default 64
[    0.564651] Unpacking initramfs...
[    0.755059] Freeing initrd memory: 11156k freed
[    0.756992] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.756997] Placing 64MB software IO TLB between ffff8800bb77b000 - ffff8800bf77b000
[    0.756999] software IO TLB at phys 0xbb77b000 - 0xbf77b000
[    0.757463] audit: initializing netlink socket (disabled)
[    0.757477] type=2000 audit(1311696269.584:1): initialized
[    0.774750] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.787367] VFS: Disk quotas dquot_6.5.2
[    0.787395] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.787460] msgmni has been set to 7658
[    0.787599] alg: No test for stdrng (krng)
[    0.787631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.787634] io scheduler noop registered
[    0.787635] io scheduler deadline registered
[    0.787651] io scheduler cfq registered (default)
[    0.787730] pcieport 0000:00:01.0: setting latency timer to 64
[    0.787754] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.787905] vesafb: mode is 1680x1050x32, linelength=6720, pages=0
[    0.787907] vesafb: scrolling: redraw
[    0.787909] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.788427] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011100000, using 6912k, total 6912k
[    0.970751] Console: switching to colour frame buffer device 210x65
[    1.151523] fb0: VESA VGA frame buffer device
[    1.151548] ERST: Table is not found!
[    1.151613] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.171921] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.253248] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.277320] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.333101] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.372843] Linux agpgart interface v0.103
[    1.373003] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.373325] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.373330] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.373435] mousedev: PS/2 mouse device common for all mice
[    1.373460] rtc_cmos 00:03: RTC can wake from S4
[    1.373554] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.373577] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.373586] cpuidle: using governor ladder
[    1.373588] cpuidle: using governor menu
[    1.373731] TCP cubic registered
[    1.373775] NET: Registered protocol family 10
[    1.374122] Mobile IPv6
[    1.374124] NET: Registered protocol family 17
[    1.374127] Registering the dns_resolver key type
[    1.374239] PM: Hibernation image not present or could not be loaded.
[    1.374247] registered taskstats version 1
[    1.380775] rtc_cmos 00:03: setting system clock to 2011-07-26 16:04:30 UTC (1311696270)
[    1.380802] Initializing network drop monitor service
[    1.381779] Freeing unused kernel memory: 552k freed
[    1.381846] Write protecting the kernel read-only data: 6144k
[    1.384262] Freeing unused kernel memory: 816k freed
[    1.386573] Freeing unused kernel memory: 760k freed
[    1.393425] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.461144] udevd[61]: starting version 172
[    1.476223] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.476248] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.476297] r8169 0000:02:00.0: setting latency timer to 64
[    1.476351] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[    1.476764] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000064a000, 40:61:86:63:b8:90, XID 081000c0 IRQ 41
[    1.479936] SCSI subsystem initialized
[    1.482891] usbcore: registered new interface driver usbfs
[    1.483050] usbcore: registered new interface driver hub
[    1.485573] libata version 3.00 loaded.
[    1.485837] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.485869] pata_jmicron 0000:03:00.0: setting latency timer to 64
[    1.486280] ata_piix 0000:00:1f.2: version 2.13
[    1.486298] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.486302] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.486337] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.486815] scsi0 : pata_jmicron
[    1.487323] scsi2 : pata_jmicron
[    1.487862] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 18
[    1.487865] ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 18
[    1.491192] usbcore: registered new device driver usb
[    1.492677] scsi1 : ata_piix
[    1.493708] scsi3 : ata_piix
[    1.495421] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[    1.495428] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[    1.496981] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.496987] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.497026] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.497691] scsi4 : ata_piix
[    1.497978] scsi5 : ata_piix
[    1.499229] ata5: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
[    1.499234] ata6: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
[    1.508693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.508723] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.508745] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.508749] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.508775] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.508804] ehci_hcd 0000:00:1a.0: debug port 2
[    1.512727] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    1.512748] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7ffc000
[    1.528180] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.528216] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.528221] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.528227] usb usb1: Product: EHCI Host Controller
[    1.528229] usb usb1: Manufacturer: Linux 3.0.0-git5 ehci_hcd
[    1.528230] usb usb1: SerialNumber: 0000:00:1a.0
[    1.528316] hub 1-0:1.0: USB hub found
[    1.528320] hub 1-0:1.0: 2 ports detected
[    1.528382] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.528393] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.528395] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.528400] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.528421] ehci_hcd 0000:00:1d.0: debug port 2
[    1.532363] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    1.532379] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7ff6000
[    1.548094] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.548120] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.548124] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.548128] usb usb2: Product: EHCI Host Controller
[    1.548131] usb usb2: Manufacturer: Linux 3.0.0-git5 ehci_hcd
[    1.548135] usb usb2: SerialNumber: 0000:00:1d.0
[    1.548226] hub 2-0:1.0: USB hub found
[    1.548229] hub 2-0:1.0: 2 ports detected
[    1.751517] Refined TSC clocksource calibration: 2926.000 MHz.
[    1.751520] Switching to clocksource tsc
[    1.825929] ata5: SATA link down (SStatus 0 SControl 300)
[    1.836518] ata6: SATA link down (SStatus 0 SControl 300)
[    1.839286] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    1.971225] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.971230] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.971368] hub 1-1:1.0: USB hub found
[    1.971473] hub 1-1:1.0: 6 ports detected
[    2.082613] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    2.214552] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.214557] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.214691] hub 2-1:1.0: USB hub found
[    2.214800] hub 2-1:1.0: 8 ports detected
[    2.286095] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.286110] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.290086] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.290100] ata4.01: SATA link down (SStatus 0 SControl 300)
[    2.298338] ata4.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[    2.298343] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.314293] ata4.00: configured for UDMA/133
[    2.348835] ata3.00: HPA detected: current 312579695, native 312581808
[    2.348842] ata3.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
[    2.348847] ata3.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.348857] ata3.01: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100
[    2.415287] ata3.00: configured for UDMA/133
[    2.429757] ata3.01: configured for UDMA/100
[    2.430268] scsi 1:0:0:0: Direct-Access     ATA      ST3160815AS      3.AA PQ: 0 ANSI: 5
[    2.431054] scsi 1:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-S203P  SB00 PQ: 0 ANSI: 5
[    2.431247] scsi 3:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[    2.436433] sd 1:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[    2.436482] sd 1:0:0:0: [sda] Write Protect is off
[    2.436484] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.436507] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.438271] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.438277] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.438482] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    2.438550] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.438600] sd 3:0:0:0: [sdb] Write Protect is off
[    2.438602] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.438622] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.444151]  sdb: sdb1
[    2.444345] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.463958]  sda: sda1 sda2
[    2.464189] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.465410] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.465457] sr 1:0:1:0: Attached scsi generic sg1 type 5
[    2.465498] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    3.028487] device-mapper: uevent: version 1.0.3
[    3.028551] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[   14.986165] Intel AES-NI instructions are not detected.
[   15.793230] PM: Starting manual resume from disk
[   15.793233] PM: Hibernation image partition 254:1 present
[   15.793234] PM: Looking for hibernation image.
[   15.799723] PM: Image not found (code -22)
[   15.799724] PM: Hibernation image not present or could not be loaded.
[   15.802314] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[   15.802317] PM: Marking nosave pages: 00000000bf780000 - 0000000100000000
[   15.803239] PM: Basic memory bitmaps created
[   15.815794] PM: Basic memory bitmaps freed
[   15.856583] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   17.474212] udevd[381]: starting version 172
[   18.402744] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[   18.402749] ACPI: Power Button [PWRB]
[   18.402788] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   18.402791] ACPI: Power Button [PWRF]
[   18.610108] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   18.739746] parport_pc 00:08: reported by Plug and Play ACPI
[   18.739793] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   18.755770] ACPI: acpi_idle registered with cpuidle
[   18.756291] Monitor-Mwait will be used to enter C-1 state
[   18.756314] Monitor-Mwait will be used to enter C-3 state
[   18.756334] Monitor-Mwait will be used to enter C-3 state
[   18.980849] wmi: Mapper loaded
[   19.163586] [drm] Initialized drm 1.1.0 20060810
[   19.165183] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   19.165266] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   19.165310] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   19.317712] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[   19.335223] hda_codec: ALC889: BIOS auto-probing.
[   19.366248] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0
[   19.366587] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[   19.367018] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[   19.373547] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   19.373607] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   19.373668] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   19.373722] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   19.374278] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   19.493354] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.493365] nouveau 0000:01:00.0: setting latency timer to 64
[   19.495189] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084200a2)
[   19.495196] checking generic (f9000000 6c0000) vs hw (d0000000 10000000)
[   19.495200] checking generic (f9000000 6c0000) vs hw (f8000000 2000000)
[   19.495204] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   19.495288] Console: switching to colour dummy device 80x25
[   19.501437] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[   19.549473] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   19.549480] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   19.549484] [drm] nouveau 0000:01:00.0: Bios version 60.84.5e.00
[   19.549489] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   19.549493] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[   19.549498] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
[   19.549502] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000030
[   19.549506] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[   19.549509] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
[   19.549513] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
[   19.549518] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[   19.549523] [drm] nouveau 0000:01:00.0:   0: 0x00002030: type 0x30 idx 0 tag 0x08
[   19.549528] [drm] nouveau 0000:01:00.0:   1: 0x00001130: type 0x30 idx 1 tag 0x07
[   19.549533] [drm] nouveau 0000:01:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[   19.549537] [drm] nouveau 0000:01:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
[   19.549542] [drm] nouveau 0000:01:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
[   19.549547] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC474
[   19.572519] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC7F8
[   19.589185] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD248
[   19.589195] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD33A
[   19.590265] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD56D
[   19.590269] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD5D2
[   19.610063] [drm] nouveau 0000:01:00.0: 0xD5D2: Condition still not met after 20ms, skipping following opcodes
[   19.610170] [drm] nouveau 0000:01:00.0: timingset 255 does not exist
[   19.628868] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[   19.628872] [drm] nouveau 0000:01:00.0: 0: memory 720MHz core 600MHz shader 1450MHz fanspeed 100%
[   19.628885] [drm] nouveau 0000:01:00.0: c: memory 702MHz core 540MHz shader 1188MHz voltage 1320mV
[   19.629103] [TTM] Zone  kernel: Available graphics memory: 1961734 kiB.
[   19.629108] [TTM] Initializing pool allocator.
[   19.629133] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[   19.629144] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   19.633064] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   19.711927] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[   19.711932] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[   19.713917] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   19.713920] [drm] No driver support for vblank timestamp query.
[   19.894477] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x40000000, bo ffff88012dbdb800
[   19.894707] fbcon: nouveaufb (fb0) is primary device
[   19.941562] Console: switching to colour frame buffer device 210x65
[   19.943084] fb0: nouveaufb frame buffer device
[   19.943087] drm: registered panic notifier
[   19.943095] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   21.681726] EXT4-fs (dm-2): re-mounted. Opts: (null)
[   21.928006] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[   38.198098] loop: module loaded
[   38.308283] coretemp coretemp.0: TjMax is 105 C.
[   38.308301] coretemp coretemp.0: TjMax is 105 C.
[   38.410728] f71882fg: Found f71889fg chip at 0xa00, revision 21
[   38.410946] f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode
[   38.410949] f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode
[   38.410951] f71882fg f71882fg.2560: Fan: 3 is in duty-cycle mode
[   38.881108] Adding 7811068k swap on /dev/mapper/hermione-swap.  Priority:-1 extents:1 across:7811068k 
[   39.827328] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   39.938208] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[   40.058323] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[   40.132767] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[   41.189080] fuse init (API version 7.16)
[   44.489073] r8169 0000:02:00.0: eth0: link down
[   44.489083] r8169 0000:02:00.0: eth0: link down
[   44.489609] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   46.475035] r8169 0000:02:00.0: eth0: link up
[   46.475539] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   52.262368] Bluetooth: Core ver 2.16
[   52.262399] NET: Registered protocol family 31
[   52.262404] Bluetooth: HCI device and connection manager initialized
[   52.262409] Bluetooth: HCI socket layer initialized
[   52.262413] Bluetooth: L2CAP socket layer initialized
[   52.262423] Bluetooth: SCO socket layer initialized
[   52.416207] Bluetooth: RFCOMM TTY layer initialized
[   52.416213] Bluetooth: RFCOMM socket layer initialized
[   52.416215] Bluetooth: RFCOMM ver 1.11
[   52.416332] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   52.416334] Bluetooth: BNEP filters: protocol multicast
[   53.287785] lp0: using parport0 (interrupt-driven).
[   53.403444] ppdev: user-space parallel port driver
[   56.651645] eth0: no IPv6 routers present
[   66.530693] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=0
[   66.534352] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[   66.610156] EXT4-fs (dm-5): re-mounted. Opts: commit=0
[   66.665884] EXT4-fs (dm-6): re-mounted. Opts: commit=0
[   66.690300] EXT4-fs (dm-7): re-mounted. Opts: commit=0
[   67.193096] hda-intel: Invalid position buffer, using LPIB read method instead.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0 (ban@Hermione) (gcc version 4.6.1 (Debian 4.6.1-5) ) #4 SMP Tue Jul 26 15:38:38 CEST 2011
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0 root=/dev/mapper/hermione-debian ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[    0.000000]  BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: MSI MS-7636/H55M-E33(MS-7636)   , BIOS V1.1 11/23/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E3FFF write-protect
[    0.000000]   E4000-E7FFF write-through
[    0.000000]   E8000-EBFFF write-protect
[    0.000000]   EC000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 13C000000 mask FFC000000 uncachable
[    0.000000]   1 base 000000000 mask F00000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[    0.000000]  0000000000 - 00bf600000 page 2M
[    0.000000]  00bf600000 - 00bf780000 page 4k
[    0.000000] kernel direct mapping tables up to bf780000 @ bf77b000-bf780000
[    0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[    0.000000]  0100000000 - 0138000000 page 2M
[    0.000000] kernel direct mapping tables up to 138000000 @ 137ffa000-138000000
[    0.000000] RAMDISK: 36a4e000 - 3751f000
[    0.000000] ACPI: RSDP 00000000000f9f00 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000bf780000 00044 (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bf780200 00084 (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bf7805e0 07303 (v01  A7636 A7636100 00000100 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bf78e000 00040
[    0.000000] ACPI: APIC 00000000bf780390 0008C (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bf780420 0003C (v01 7636MS OEMMCFG  20091123 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bf78e040 00072 (v01 7636MS A7636100 20091123 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bf78a5e0 00038 (v01 7636MS OEMHPET  20091123 MSFT 00000097)
[    0.000000] ACPI: GSCI 00000000bf78e0c0 02024 (v01 7636MS GMCHSCI  20091123 MSFT 00000097)
[    0.000000] ACPI: DMAR 00000000bf7900f0 00108 (v01    AMI  OEMDMAR 00000001 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bf791940 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000138000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[    0.000000]   NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880133800000-ffff880136ffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00138000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bf780
[    0.000000]     0: 0x00100000 -> 0x00138000
[    0.000000] On node 0 totalpages: 1013519
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 765880 pages, LIFO batch:31
[    0.000000]   Normal zone: 3136 pages used for memmap
[    0.000000]   Normal zone: 226240 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
[    0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000
[    0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
[    0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000
[    0.000000] PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s78976 r8192 d23424 u262144
[    0.000000] pcpu-alloc: s78976 r8192 d23424 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 996042
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0 root=/dev/mapper/hermione-debian ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x77/0x85()
[    0.000000] Hardware name: MS-7636
[    0.000000] Your BIOS is broken; DMAR reported at address fed93000 returns all ones!
[    0.000000] BIOS vendor: American Megatrends Inc.; Ver: V1.1; Product Version: 1.0
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 3.0.0 #4
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81043359>] ? warn_slowpath_common+0x78/0x8c
[    0.000000]  [<ffffffff810433bb>] ? warn_slowpath_fmt_taint+0x3d/0x42
[    0.000000]  [<ffffffff81318a7e>] ? __pte+0x7/0x8
[    0.000000]  [<ffffffff816b2a2d>] ? __early_set_fixmap+0x89/0x8d
[    0.000000]  [<ffffffff81318a7e>] ? __pte+0x7/0x8
[    0.000000]  [<ffffffff816b2a2d>] ? __early_set_fixmap+0x89/0x8d
[    0.000000]  [<ffffffff81318a7e>] ? __pte+0x7/0x8
[    0.000000]  [<ffffffff811b72c9>] ? warn_invalid_dmar+0x77/0x85
[    0.000000]  [<ffffffff816b2e3a>] ? early_iounmap+0xc5/0x114
[    0.000000]  [<ffffffff816c6f13>] ? check_zero_address+0xb0/0xeb
[    0.000000]  [<ffffffff81327736>] ? bad_to_user+0x620/0x620
[    0.000000]  [<ffffffff816c6f5f>] ? detect_intel_iommu+0x11/0xa6
[    0.000000]  [<ffffffff816a5b29>] ? pci_iommu_alloc+0x3f/0x67
[    0.000000]  [<ffffffff816b280c>] ? mem_init+0x14/0xe5
[    0.000000]  [<ffffffff8169f94e>] ? start_kernel+0x1d0/0x3c8
[    0.000000]  [<ffffffff8169f140>] ? early_idt_handlers+0x140/0x140
[    0.000000]  [<ffffffff8169f3c4>] ? x86_64_start_kernel+0x104/0x111
[    0.000000] ---[ end trace a7919e7f17c0a725 ]---
[    0.000000] Disabling lock debugging due to kernel taint
[    0.000000] Memory: 3910280k/5111808k available (3229k kernel code, 1057732k absent, 143796k reserved, 3465k data, 556k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 32505856 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2925.980 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5851.96 BogoMIPS (lpj=11703920)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000068] Security Framework initialized
[    0.000071] SELinux:  Disabled at boot.
[    0.000395] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001288] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001656] Mount-cache hash table entries: 256
[    0.001773] Initializing cgroup subsys cpuacct
[    0.001778] Initializing cgroup subsys memory
[    0.001788] Initializing cgroup subsys devices
[    0.001790] Initializing cgroup subsys freezer
[    0.001792] Initializing cgroup subsys net_cls
[    0.001795] Initializing cgroup subsys blkio
[    0.001827] CPU: Physical Processor ID: 0
[    0.001828] CPU: Processor Core ID: 0
[    0.001833] mce: CPU supports 9 MCE banks
[    0.001844] CPU0: Thermal monitoring enabled (TM1)
[    0.001852] using mwait in idle threads.
[    0.002203] ACPI: Core revision 20110413
[    0.028400] DMAR: Host address width 36
[    0.028402] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.028409] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[    0.028411] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.028419] DMAR: parse DMAR table failure.
[    0.028740] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068314] CPU0: Intel(R) Core(TM) i3 CPU         530  @ 2.93GHz stepping 02
[    0.172760] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.172766] ... version:                3
[    0.172768] ... bit width:              48
[    0.172769] ... generic registers:      4
[    0.172770] ... value mask:             0000ffffffffffff
[    0.172771] ... max period:             000000007fffffff
[    0.172773] ... fixed-purpose events:   3
[    0.172774] ... event mask:             000000070000000f
[    0.172978] NMI watchdog enabled, takes one hw-pmu counter.
[    0.173094] Booting Node   0, Processors  #1
[    0.173097] smpboot cpu 1: start_ip = 9a000
[    0.280574] NMI watchdog enabled, takes one hw-pmu counter.
[    0.280706]  #2
[    0.280708] smpboot cpu 2: start_ip = 9a000
[    0.388319] NMI watchdog enabled, takes one hw-pmu counter.
[    0.388440]  #3
[    0.388441] smpboot cpu 3: start_ip = 9a000
[    0.496002] NMI watchdog enabled, takes one hw-pmu counter.
[    0.496036] Brought up 4 CPUs
[    0.496038] Total of 4 processors activated (23407.53 BogoMIPS).
[    0.497950] devtmpfs: initialized
[    0.500920] PM: Registering ACPI NVS region at bf78e000 (270336 bytes)
[    0.501042] print_constraints: dummy: 
[    0.501094] NET: Registered protocol family 16
[    0.501174] ACPI: bus type pci registered
[    0.501227] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.501229] PCI: not using MMCONFIG
[    0.501230] PCI: Using configuration type 1 for base access
[    0.501657] bio: create slab <bio-0> at 0
[    0.502592] ACPI: EC: Look up EC in DSDT
[    0.503711] ACPI: Executed 1 blocks of module-level executable AML code
[    0.506755] ACPI: SSDT 00000000bf790200 01238 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.507014] ACPI: Dynamic OEM Table Load:
[    0.507016] ACPI: SSDT           (null) 01238 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.507095] ACPI: SSDT 00000000bf791440 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[    0.507321] ACPI: Dynamic OEM Table Load:
[    0.507323] ACPI: SSDT           (null) 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[    0.507675] ACPI: Interpreter enabled
[    0.507677] ACPI: (supports S0 S3 S4 S5)
[    0.507693] ACPI: Using IOAPIC for interrupt routing
[    0.507711] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.508641] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.531940] ACPI: No dock devices found.
[    0.531942] HEST: Table not found.
[    0.531944] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.532125] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.532280] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.532282] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.532284] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.532285] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.532287] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    0.532289] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[    0.532299] pci 0000:00:00.0: [8086:0040] type 0 class 0x000600
[    0.532313] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.532328] pci 0000:00:01.0: [8086:0041] type 1 class 0x000604
[    0.532348] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.532351] pci 0000:00:01.0: PME# disabled
[    0.532383] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.532410] pci 0000:00:16.0: reg 10: [mem 0xf7ffe000-0xf7ffe00f 64bit]
[    0.532481] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.532485] pci 0000:00:16.0: PME# disabled
[    0.532511] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    0.532529] pci 0000:00:1a.0: reg 10: [mem 0xf7ffc000-0xf7ffc3ff]
[    0.532589] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.532592] pci 0000:00:1a.0: PME# disabled
[    0.532611] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.532623] pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[    0.532666] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.532669] pci 0000:00:1b.0: PME# disabled
[    0.532684] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.532727] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.532730] pci 0000:00:1c.0: PME# disabled
[    0.532747] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    0.532791] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.532794] pci 0000:00:1c.2: PME# disabled
[    0.532819] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    0.532836] pci 0000:00:1d.0: reg 10: [mem 0xf7ff6000-0xf7ff63ff]
[    0.532896] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.532900] pci 0000:00:1d.0: PME# disabled
[    0.532915] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.532960] pci 0000:00:1f.0: [8086:3b06] type 0 class 0x000601
[    0.533054] pci 0000:00:1f.2: [8086:3b20] type 0 class 0x000101
[    0.533066] pci 0000:00:1f.2: reg 10: [io  0xbc00-0xbc07]
[    0.533073] pci 0000:00:1f.2: reg 14: [io  0xb880-0xb883]
[    0.533079] pci 0000:00:1f.2: reg 18: [io  0xb800-0xb807]
[    0.533086] pci 0000:00:1f.2: reg 1c: [io  0xb480-0xb483]
[    0.533092] pci 0000:00:1f.2: reg 20: [io  0xb400-0xb40f]
[    0.533098] pci 0000:00:1f.2: reg 24: [io  0xb080-0xb08f]
[    0.533127] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.533139] pci 0000:00:1f.3: reg 10: [mem 0xf7ff4000-0xf7ff40ff 64bit]
[    0.533156] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.533182] pci 0000:00:1f.5: [8086:3b26] type 0 class 0x000101
[    0.533194] pci 0000:00:1f.5: reg 10: [io  0xac00-0xac07]
[    0.533200] pci 0000:00:1f.5: reg 14: [io  0xa880-0xa883]
[    0.533206] pci 0000:00:1f.5: reg 18: [io  0xa800-0xa807]
[    0.533212] pci 0000:00:1f.5: reg 1c: [io  0xa480-0xa483]
[    0.533218] pci 0000:00:1f.5: reg 20: [io  0xa400-0xa40f]
[    0.533225] pci 0000:00:1f.5: reg 24: [io  0xa080-0xa08f]
[    0.533275] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
[    0.533283] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[    0.533292] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.533300] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.533306] pci 0000:01:00.0: reg 24: [io  0xcc00-0xcc7f]
[    0.533312] pci 0000:01:00.0: reg 30: [mem 0xfbee0000-0xfbefffff pref]
[    0.533347] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.533349] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.533351] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbefffff]
[    0.533354] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.533399] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[    0.533414] pci 0000:02:00.0: reg 10: [io  0xd800-0xd8ff]
[    0.533438] pci 0000:02:00.0: reg 18: [mem 0xf6fff000-0xf6ffffff 64bit pref]
[    0.533454] pci 0000:02:00.0: reg 20: [mem 0xf6ff8000-0xf6ffbfff 64bit pref]
[    0.533465] pci 0000:02:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
[    0.533498] pci 0000:02:00.0: supports D1 D2
[    0.533500] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.533504] pci 0000:02:00.0: PME# disabled
[    0.539753] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.539759] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.539765] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.539773] pci 0000:00:1c.0:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.539841] pci 0000:03:00.0: [197b:2368] type 0 class 0x000101
[    0.539868] pci 0000:03:00.0: reg 10: [io  0xec00-0xec07]
[    0.539880] pci 0000:03:00.0: reg 14: [io  0xe880-0xe883]
[    0.539893] pci 0000:03:00.0: reg 18: [io  0xe800-0xe807]
[    0.539906] pci 0000:03:00.0: reg 1c: [io  0xe480-0xe483]
[    0.539918] pci 0000:03:00.0: reg 20: [io  0xe400-0xe40f]
[    0.539983] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.539991] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.539994] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.539997] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.540002] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.540050] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.540053] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.540057] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.540061] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.540063] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.540065] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.540067] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.540069] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.540071] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.540073] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[    0.540087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.540287] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[    0.540339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[    0.540370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT]
[    0.540524]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.540714]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[    0.540716] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.547249] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.547287] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.547323] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.547360] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *6 7 10 11 12 14 15)
[    0.547398] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.547436] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.547474] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.547511] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.547591] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.547594] vgaarb: loaded
[    0.547595] vgaarb: bridge control possible 0000:01:00.0
[    0.547624] PCI: Using ACPI for IRQ routing
[    0.552607] PCI: Discovered peer bus ff
[    0.552635] pci 0000:ff:00.0: [8086:2c61] type 0 class 0x000600
[    0.552650] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    0.552666] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    0.552680] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    0.552694] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    0.552708] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    0.552840] PCI: pci_cache_line_size set to 64 bytes
[    0.552892] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.552894] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff 
[    0.552979] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.552983] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.554991] Switching to clocksource hpet
[    0.555696] Switched to NOHz mode on CPU #0
[    0.555796] Switched to NOHz mode on CPU #1
[    0.555827] Switched to NOHz mode on CPU #3
[    0.555843] Switched to NOHz mode on CPU #2
[    0.556152] pnp: PnP ACPI init
[    0.556163] ACPI: bus type pnp registered
[    0.556244] pnp 00:00: [bus 00-ff]
[    0.556246] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.556248] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.556249] pnp 00:00: [io  0x0d00-0xffff window]
[    0.556251] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.556253] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.556254] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    0.556256] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[    0.556295] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.556303] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[    0.556305] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[    0.556306] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[    0.556308] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.556339] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.556341] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.556343] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.556345] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.556347] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.556377] pnp 00:02: [dma 4]
[    0.556378] pnp 00:02: [io  0x0000-0x000f]
[    0.556380] pnp 00:02: [io  0x0081-0x0083]
[    0.556381] pnp 00:02: [io  0x0087]
[    0.556382] pnp 00:02: [io  0x0089-0x008b]
[    0.556384] pnp 00:02: [io  0x008f]
[    0.556385] pnp 00:02: [io  0x00c0-0x00df]
[    0.556404] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.556413] pnp 00:03: [io  0x0070-0x0071]
[    0.556420] pnp 00:03: [irq 8]
[    0.556440] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.556448] pnp 00:04: [io  0x0061]
[    0.556466] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.556473] pnp 00:05: [io  0x00f0-0x00ff]
[    0.556478] pnp 00:05: [irq 13]
[    0.556499] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.556730] pnp 00:06: [io  0x03f8-0x03ff]
[    0.556735] pnp 00:06: [irq 4]
[    0.556736] pnp 00:06: [dma 0 disabled]
[    0.556785] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.557012] pnp 00:07: [io  0x02f8-0x02ff]
[    0.557017] pnp 00:07: [irq 3]
[    0.557018] pnp 00:07: [dma 0 disabled]
[    0.557085] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.557387] pnp 00:08: [io  0x0378-0x037f]
[    0.557391] pnp 00:08: [irq 7]
[    0.557393] pnp 00:08: [dma 0 disabled]
[    0.557509] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.557533] pnp 00:09: [io  0x0060]
[    0.557535] pnp 00:09: [io  0x0064]
[    0.557539] pnp 00:09: [irq 1]
[    0.557564] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.557602] pnp 00:0a: [irq 12]
[    0.557628] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.557706] pnp 00:0b: [io  0x0000-0xffffffffffffffff disabled]
[    0.557708] pnp 00:0b: [io  0x0a00-0x0adf]
[    0.557710] pnp 00:0b: [io  0x0ae0-0x0aef]
[    0.557744] system 00:0b: [io  0x0a00-0x0adf] has been reserved
[    0.557746] system 00:0b: [io  0x0ae0-0x0aef] has been reserved
[    0.557749] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.557849] pnp 00:0c: [io  0x0010-0x001f]
[    0.557851] pnp 00:0c: [io  0x0022-0x002d]
[    0.557852] pnp 00:0c: [io  0x0030-0x003f]
[    0.557854] pnp 00:0c: [io  0x0044-0x005f]
[    0.557855] pnp 00:0c: [io  0x0062-0x0063]
[    0.557857] pnp 00:0c: [io  0x0065-0x006f]
[    0.557858] pnp 00:0c: [io  0x0072-0x007f]
[    0.557860] pnp 00:0c: [io  0x0080]
[    0.557861] pnp 00:0c: [io  0x0084-0x0086]
[    0.557862] pnp 00:0c: [io  0x0088]
[    0.557863] pnp 00:0c: [io  0x008c-0x008e]
[    0.557866] pnp 00:0c: [io  0x0090-0x009f]
[    0.557868] pnp 00:0c: [io  0x00a2-0x00bf]
[    0.557869] pnp 00:0c: [io  0x00e0-0x00ef]
[    0.557870] pnp 00:0c: [io  0x04d0-0x04d1]
[    0.557872] pnp 00:0c: [io  0x0800-0x087f]
[    0.557873] pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
[    0.557875] pnp 00:0c: [io  0x0500-0x057f]
[    0.557877] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[    0.557878] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[    0.557880] pnp 00:0c: [mem 0xfed45000-0xfed89fff]
[    0.557881] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[    0.557883] pnp 00:0c: [mem 0xfed40000-0xfed8ffff]
[    0.557935] system 00:0c: [io  0x04d0-0x04d1] has been reserved
[    0.557937] system 00:0c: [io  0x0800-0x087f] has been reserved
[    0.557940] system 00:0c: [io  0x0500-0x057f] has been reserved
[    0.557943] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.557945] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.557947] system 00:0c: [mem 0xfed45000-0xfed89fff] has been reserved
[    0.557949] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.557952] system 00:0c: [mem 0xfed40000-0xfed8ffff] could not be reserved
[    0.557954] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.558002] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[    0.558024] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.558096] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[    0.558097] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[    0.558135] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.558137] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.558140] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.558179] pnp 00:0f: [mem 0xe0000000-0xefffffff]
[    0.558213] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[    0.558215] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.558405] pnp 00:10: [mem 0x00000000-0x0009ffff]
[    0.558407] pnp 00:10: [mem 0x000c0000-0x000cffff]
[    0.558409] pnp 00:10: [mem 0x000e0000-0x000fffff]
[    0.558410] pnp 00:10: [mem 0x00100000-0xbfffffff]
[    0.558412] pnp 00:10: [mem 0xfed90000-0xffffffff]
[    0.558459] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.558461] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.558463] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.558465] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.558468] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.558470] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.558579] pnp: PnP ACPI: found 17 devices
[    0.558581] ACPI: ACPI bus type pnp unregistered
[    0.564297] PCI: max bus depth: 1 pci_try_num: 2
[    0.564320] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.564323] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.564325] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.564327] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.564330] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbefffff]
[    0.564332] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.564335] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.564337] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.564341] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.564344] pci 0000:00:1c.0:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.564349] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.564351] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.564354] pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.564357] pci 0000:00:1c.2:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.564362] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.564363] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.564367] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.564369] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.564382] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.564385] pci 0000:00:01.0: setting latency timer to 64
[    0.564393] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.564396] pci 0000:00:1c.0: setting latency timer to 64
[    0.564401] pci 0000:00:1c.2: enabling device (0105 -> 0107)
[    0.564406] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.564409] pci 0000:00:1c.2: setting latency timer to 64
[    0.564414] pci 0000:00:1e.0: setting latency timer to 64
[    0.564417] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.564418] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.564420] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.564422] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.564423] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.564425] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.564426] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.564428] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff]
[    0.564430] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.564431] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.564433] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.564434] pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.564436] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.564438] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.564439] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.564441] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.564443] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.564444] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.564446] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.564447] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.564449] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.564450] pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
[    0.564452] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[    0.564513] NET: Registered protocol family 2
[    0.564632] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.565429] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.567576] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.567831] TCP: Hash tables configured (established 524288 bind 65536)
[    0.567833] TCP reno registered
[    0.567841] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.567870] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.568025] NET: Registered protocol family 1
[    0.568103] pci 0000:01:00.0: Boot video device
[    0.568118] PCI: CLS 32 bytes, default 64
[    0.568154] Unpacking initramfs...
[    0.757971] Freeing initrd memory: 11076k freed
[    0.759916] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.759921] Placing 64MB software IO TLB between ffff8800bb77b000 - ffff8800bf77b000
[    0.759923] software IO TLB at phys 0xbb77b000 - 0xbf77b000
[    0.760367] audit: initializing netlink socket (disabled)
[    0.760379] type=2000 audit(1311688726.588:1): initialized
[    0.777496] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.789947] VFS: Disk quotas dquot_6.5.2
[    0.789977] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.790043] msgmni has been set to 7658
[    0.790174] alg: No test for stdrng (krng)
[    0.790211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.790214] io scheduler noop registered
[    0.790215] io scheduler deadline registered
[    0.790231] io scheduler cfq registered (default)
[    0.790310] pcieport 0000:00:01.0: setting latency timer to 64
[    0.790346] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.790500] vesafb: mode is 1680x1050x32, linelength=6720, pages=0
[    0.790502] vesafb: scrolling: redraw
[    0.790503] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.791067] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011100000, using 6912k, total 6912k
[    0.973515] Console: switching to colour frame buffer device 210x65
[    1.155248] fb0: VESA VGA frame buffer device
[    1.155278] ERST: Table is not found!
[    1.155335] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.175635] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.245422] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.313461] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.333810] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.334065] Linux agpgart interface v0.103
[    1.334229] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.334553] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.334558] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.334643] mousedev: PS/2 mouse device common for all mice
[    1.334677] rtc_cmos 00:03: RTC can wake from S4
[    1.334764] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.334788] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.334796] cpuidle: using governor ladder
[    1.334798] cpuidle: using governor menu
[    1.334952] TCP cubic registered
[    1.335001] NET: Registered protocol family 10
[    1.335398] Mobile IPv6
[    1.335400] NET: Registered protocol family 17
[    1.335403] Registering the dns_resolver key type
[    1.335474] PM: Hibernation image not present or could not be loaded.
[    1.335483] registered taskstats version 1
[    1.342014] rtc_cmos 00:03: setting system clock to 2011-07-26 13:58:47 UTC (1311688727)
[    1.342043] Initializing network drop monitor service
[    1.343054] Freeing unused kernel memory: 556k freed
[    1.343122] Write protecting the kernel read-only data: 6144k
[    1.345825] Freeing unused kernel memory: 848k freed
[    1.348347] Freeing unused kernel memory: 776k freed
[    1.355030] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.422921] udevd[60]: starting version 172
[    1.433633] usbcore: registered new interface driver usbfs
[    1.433662] usbcore: registered new interface driver hub
[    1.433932] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.433953] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.433992] r8169 0000:02:00.0: setting latency timer to 64
[    1.434046] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[    1.434465] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000064a000, 40:61:86:63:b8:90, XID 081000c0 IRQ 41
[    1.436412] usbcore: registered new device driver usb
[    1.436832] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.436859] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.436882] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.436886] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.436911] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.436944] ehci_hcd 0000:00:1a.0: debug port 2
[    1.440879] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    1.440901] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7ffc000
[    1.447450] SCSI subsystem initialized
[    1.456553] libata version 3.00 loaded.
[    1.456797] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.456827] pata_jmicron 0000:03:00.0: setting latency timer to 64
[    1.459957] scsi0 : pata_jmicron
[    1.460496] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.460521] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.460524] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.460526] usb usb1: Product: EHCI Host Controller
[    1.460528] usb usb1: Manufacturer: Linux 3.0.0 ehci_hcd
[    1.460529] usb usb1: SerialNumber: 0000:00:1a.0
[    1.460653] hub 1-0:1.0: USB hub found
[    1.460659] hub 1-0:1.0: 2 ports detected
[    1.460759] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.460789] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.460793] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.460803] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.460831] ehci_hcd 0000:00:1d.0: debug port 2
[    1.464738] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    1.464796] scsi1 : pata_jmicron
[    1.465341] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7ff6000
[    1.472345] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 18
[    1.472349] ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 18
[    1.480445] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.480471] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.480474] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.480476] usb usb2: Product: EHCI Host Controller
[    1.480478] usb usb2: Manufacturer: Linux 3.0.0 ehci_hcd
[    1.480480] usb usb2: SerialNumber: 0000:00:1d.0
[    1.480598] hub 2-0:1.0: USB hub found
[    1.480603] hub 2-0:1.0: 2 ports detected
[    1.492815] ata_piix 0000:00:1f.2: version 2.13
[    1.492840] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.492845] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.492880] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.493090] scsi2 : ata_piix
[    1.493141] scsi3 : ata_piix
[    1.494293] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[    1.494297] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[    1.494315] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.494319] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.494342] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.494497] scsi4 : ata_piix
[    1.494545] scsi5 : ata_piix
[    1.495376] ata5: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
[    1.495379] ata6: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
[    1.755676] Refined TSC clocksource calibration: 2925.999 MHz.
[    1.755683] Switching to clocksource tsc
[    1.771627] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    1.822097] ata6: SATA link down (SStatus 0 SControl 300)
[    1.832697] ata5: SATA link down (SStatus 0 SControl 300)
[    1.907593] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.907598] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.907735] hub 1-1:1.0: USB hub found
[    1.907841] hub 1-1:1.0: 6 ports detected
[    2.018947] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    2.150919] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.150924] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.151063] hub 2-1:1.0: USB hub found
[    2.151162] hub 2-1:1.0: 8 ports detected
[    2.298226] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.298245] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.298362] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.298373] ata4.01: SATA link down (SStatus 0 SControl 300)
[    2.306589] ata4.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[    2.306595] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.322405] ata4.00: configured for UDMA/133
[    2.359856] ata3.00: HPA detected: current 312579695, native 312581808
[    2.359863] ata3.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
[    2.359867] ata3.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.359877] ata3.01: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100
[    2.426308] ata3.00: configured for UDMA/133
[    2.441883] ata3.01: configured for UDMA/100
[    2.442396] scsi 2:0:0:0: Direct-Access     ATA      ST3160815AS      3.AA PQ: 0 ANSI: 5
[    2.443204] scsi 2:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-S203P  SB00 PQ: 0 ANSI: 5
[    2.443370] scsi 3:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[    2.447940] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.447964] sd 2:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[    2.448002] sd 3:0:0:0: [sdb] Write Protect is off
[    2.448005] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.448018] sd 2:0:0:0: [sda] Write Protect is off
[    2.448021] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.448028] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.449830] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.449870] sr 2:0:1:0: Attached scsi generic sg1 type 5
[    2.449898] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    2.450553] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.450561] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.450568] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.450686] sr 2:0:1:0: Attached scsi CD-ROM sr0
[    2.472817]  sdb: sdb1
[    2.473018] sd 3:0:0:0: [sdb] Attached SCSI disk
[    2.474338]  sda: sda1 sda2
[    2.474561] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.032627] device-mapper: uevent: version 1.0.3
[    3.032696] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[   15.600661] Intel AES-NI instructions are not detected.
[   16.369138] PM: Starting manual resume from disk
[   16.369141] PM: Hibernation image partition 254:1 present
[   16.369142] PM: Looking for hibernation image.
[   16.375589] PM: Image not found (code -22)
[   16.375590] PM: Hibernation image not present or could not be loaded.
[   16.378127] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[   16.378131] PM: Marking nosave pages: 00000000bf780000 - 0000000100000000
[   16.379052] PM: Basic memory bitmaps created
[   16.392248] PM: Basic memory bitmaps freed
[   16.432454] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   18.086582] udevd[360]: starting version 172
[   18.906352] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[   18.906359] ACPI: Power Button [PWRB]
[   18.906412] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   18.906416] ACPI: Power Button [PWRF]
[   18.939878] parport_pc 00:08: reported by Plug and Play ACPI
[   18.939921] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   19.130678] ACPI: acpi_idle registered with cpuidle
[   19.131106] Monitor-Mwait will be used to enter C-1 state
[   19.131128] Monitor-Mwait will be used to enter C-3 state
[   19.131147] Monitor-Mwait will be used to enter C-3 state
[   19.167665] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   19.315072] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   19.472567] wmi: Mapper loaded
[   19.559929] [drm] Initialized drm 1.1.0 20060810
[   19.634728] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.634733] nouveau 0000:01:00.0: setting latency timer to 64
[   19.635588] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084200a2)
[   19.635592] checking generic (f9000000 6c0000) vs hw (d0000000 10000000)
[   19.635593] checking generic (f9000000 6c0000) vs hw (f8000000 2000000)
[   19.635595] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   19.635657] Console: switching to colour dummy device 80x25
[   19.638372] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[   19.684825] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   19.684828] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   19.684830] [drm] nouveau 0000:01:00.0: Bios version 60.84.5e.00
[   19.684832] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   19.684834] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[   19.684836] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
[   19.684838] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000030
[   19.684840] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[   19.684841] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
[   19.684843] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
[   19.684845] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[   19.684847] [drm] nouveau 0000:01:00.0:   0: 0x00002030: type 0x30 idx 0 tag 0x08
[   19.684849] [drm] nouveau 0000:01:00.0:   1: 0x00001130: type 0x30 idx 1 tag 0x07
[   19.684851] [drm] nouveau 0000:01:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[   19.684853] [drm] nouveau 0000:01:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
[   19.684854] [drm] nouveau 0000:01:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
[   19.684857] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC474
[   19.707799] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC7F8
[   19.724452] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD248
[   19.724457] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD33A
[   19.725516] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD56D
[   19.725518] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD5D2
[   19.745307] [drm] nouveau 0000:01:00.0: 0xD5D2: Condition still not met after 20ms, skipping following opcodes
[   19.745324] [drm] nouveau 0000:01:00.0: timingset 255 does not exist
[   19.763955] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[   19.763964] [drm] nouveau 0000:01:00.0: 0: memory 720MHz core 600MHz shader 1450MHz fanspeed 100%
[   19.763982] [drm] nouveau 0000:01:00.0: c: memory 702MHz core 540MHz shader 1188MHz voltage 1320mV
[   19.764106] [TTM] Zone  kernel: Available graphics memory: 1961768 kiB.
[   19.764110] [TTM] Initializing pool allocator.
[   19.764129] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[   19.764139] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   19.768564] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   19.854925] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[   19.854932] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[   19.856920] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   19.856925] [drm] No driver support for vblank timestamp query.
[   20.037225] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x40000000, bo ffff88012d086800
[   20.037324] fbcon: nouveaufb (fb0) is primary device
[   20.051588] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[   20.077599] Console: switching to colour frame buffer device 210x65
[   20.079107] fb0: nouveaufb frame buffer device
[   20.079111] drm: registered panic notifier
[   20.079123] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   20.203927] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   20.204009] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   20.204055] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   20.325200] hda_codec: ALC889: BIOS auto-probing.
[   20.429086] HDMI status: Pin=4 Presence_Detect=0 ELD_Valid=0
[   20.429495] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[   20.429873] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0
[   20.433617] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   20.433680] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   20.433740] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   20.433800] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   22.206432] EXT4-fs (dm-2): re-mounted. Opts: (null)
[   22.470640] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[   35.781999] loop: module loaded
[   35.929685] coretemp coretemp.0: TjMax is 105 C.
[   35.929701] coretemp coretemp.0: TjMax is 105 C.
[   36.056650] f71882fg: Found f71889fg chip at 0xa00, revision 21
[   36.056860] f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode
[   36.056863] f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode
[   36.056865] f71882fg f71882fg.2560: Fan: 3 is in duty-cycle mode
[   36.423528] Adding 7811068k swap on /dev/mapper/hermione-swap.  Priority:-1 extents:1 across:7811068k 
[   37.462574] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   37.526008] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[   37.641146] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[   37.752696] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[   38.838897] fuse init (API version 7.16)
[   45.547048] r8169 0000:02:00.0: eth0: link down
[   45.547058] r8169 0000:02:00.0: eth0: link down
[   45.547675] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   47.055504] Bluetooth: Core ver 2.16
[   47.055537] NET: Registered protocol family 31
[   47.055541] Bluetooth: HCI device and connection manager initialized
[   47.055546] Bluetooth: HCI socket layer initialized
[   47.055550] Bluetooth: L2CAP socket layer initialized
[   47.055613] Bluetooth: SCO socket layer initialized
[   47.073789] Bluetooth: RFCOMM TTY layer initialized
[   47.073797] Bluetooth: RFCOMM socket layer initialized
[   47.073800] Bluetooth: RFCOMM ver 1.11
[   47.104130] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   47.104135] Bluetooth: BNEP filters: protocol multicast
[   47.282047] r8169 0000:02:00.0: eth0: link up
[   47.282370] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   48.457742] lp0: using parport0 (interrupt-driven).
[   48.737625] ppdev: user-space parallel port driver
[   57.976100] eth0: no IPv6 routers present
[   64.611684] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=0
[   64.613950] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[   64.679323] EXT4-fs (dm-5): re-mounted. Opts: commit=0
[   64.743593] EXT4-fs (dm-6): re-mounted. Opts: commit=0
[   64.770652] EXT4-fs (dm-7): re-mounted. Opts: commit=0

Reply to: