[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#635391: linux-image-3.0.0-1-amd64: Function Do_Suspend : could not open file : /proc/acpi/sleep.



Package: linux-2.6
Version: 3.0.0-1
Severity: normal

Cannot suspend to disk with acpitool -S:
Function Do_Suspend : could not open file : /proc/acpi/sleep.
You must have write access to /proc/acpi/sleep to suspend your computer.

-- Package-specific info:
** Version:
Linux version 3.0.0-1-amd64 (Debian 3.0.0-1) (ben@decadent.org.uk)
(gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP Sun Jul 24 0
2:24:44 UTC 2011

** Command line:
root=/dev/mapper/vgHDB-HDB6 vga=791 nouveau.modeset=0
resume=LABEL=6Y080P0.05 quiet

** Not tainted

** Kernel log:
[    1.848877] usbcore: registered new interface driver usb-storage
[    1.848879] USB Mass Storage support registered.
[    1.850269] scsi8 : usb-storage 1-2:1.0
[    1.850367] usbcore: registered new interface driver ums-cypress
[    1.855223] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[    1.855228] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.855339] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.960088] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    2.095554] usb 2-1: New USB device found, idVendor=13fe, idProduct=1d00
[    2.095557] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.095560] usb 2-1: Product: DataTraveler 2.0
[    2.095561] usb 2-1: Manufacturer: Kingston
[    2.095563] usb 2-1: SerialNumber: 5B791500042C
[    2.095902] scsi9 : usb-storage 2-1:1.0
[    2.512097] usb 4-2: new full speed USB device number 2 using ohci_hcd
[    2.736128] usb 4-2: New USB device found, idVendor=051d, idProduct=0002
[    2.736132] usb 4-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[    2.736134] usb 4-2: Product: Back-UPS RS 700G FW:856.L1 .D USB
FW:L1
[    2.736136] usb 4-2: Manufacturer: American Power Conversion
[    2.736137] usb 4-2: SerialNumber: 3B1051X26126
[    2.826963] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB
HID v1.00 Device [American Power Conversion Back-UPS RS
 700G FW:856.L1 .D USB FW:L1  ] on usb-0000:00:04.0-2/input0
[    2.827096] usbcore: registered new interface driver usbhid
[    2.827097] usbhid: USB HID core driver
[    2.851189] scsi 8:0:0:0: Direct-Access     WDC WD16 00AAJB-00J3A0
  0000 PQ: 0 ANSI: 0
[    2.952235] sd 8:0:0:0: Attached scsi generic sg4 type 0
[    2.953639] sd 8:0:0:0: [sdd] 312581808 512-byte logical blocks:
(160 GB/149 GiB)
[    2.954556] sd 8:0:0:0: [sdd] Write Protect is off
[    2.954560] sd 8:0:0:0: [sdd] Mode Sense: 27 00 00 00
[    2.955559] sd 8:0:0:0: [sdd] No Caching mode page present
[    2.955615] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[    2.958287] sd 8:0:0:0: [sdd] No Caching mode page present
[    2.958343] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[    3.028802]  sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 sdd7 sdd8 >
[    3.036161] sd 8:0:0:0: [sdd] No Caching mode page present
[    3.036217] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[    3.036273] sd 8:0:0:0: [sdd] Attached SCSI disk
[    3.040064] usb 3-3: new low speed USB device number 2 using ohci_hcd
[    3.097942] scsi 9:0:0:0: Direct-Access     Kingston DataTraveler
2.0 PMAP PQ: 0 ANSI: 0 CCS
[    3.192239] sd 9:0:0:0: Attached scsi generic sg5 type 0
[    3.193407] sd 9:0:0:0: [sde] 4014080 512-byte logical blocks:
(2.05 GB/1.91 GiB)
[    3.194805] sd 9:0:0:0: [sde] Write Protect is off
[    3.194809] sd 9:0:0:0: [sde] Mode Sense: 23 00 00 00
[    3.195825] sd 9:0:0:0: [sde] No Caching mode page present
[    3.195883] sd 9:0:0:0: [sde] Assuming drive cache: write through
[    3.199828] sd 9:0:0:0: [sde] No Caching mode page present
[    3.199884] sd 9:0:0:0: [sde] Assuming drive cache: write through
[    3.200585]  sde: sde1
[    3.203816] sd 9:0:0:0: [sde] No Caching mode page present
[    3.203872] sd 9:0:0:0: [sde] Assuming drive cache: write through
[    3.203927] sd 9:0:0:0: [sde] Attached SCSI removable disk
[    3.241121] usb 3-3: New USB device found, idVendor=09da, idProduct=0006
[    3.241125] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.241127] usb 3-3: Product: USB Optical Mouse
[    3.241128] usb 3-3: Manufacturer: A4Tech
[    4.257404] device-mapper: uevent: version 1.0.3
[    4.257466] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
initialised: dm-devel@redhat.com
[    4.724853] PM: Starting manual resume from disk
[    4.724857] PM: Hibernation image partition 8:21 present
[    4.724858] PM: Looking for hibernation image.
[    4.725196] PM: Image not found (code -22)
[    4.725199] PM: Hibernation image not present or could not be loaded.
[    5.803094] udevd[402]: starting version 172
[    6.286936] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    6.286941] ACPI: Power Button [PWRB]
[    6.286999] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    6.287001] ACPI: Power Button [PWRF]
[    6.299109] ACPI: acpi_idle registered with cpuidle
[    6.299141] ACPI: processor limited to max C-state 1
[    6.368447] wmi: Mapper loaded
[    6.451296] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    6.584704] MCE: In-kernel MCE decoding enabled.
[    6.615313] input: A4Tech USB Optical Mouse as
/devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input4
[    6.615386] a4tech 0003:09DA:0006.0002: input,hidraw1: USB HID
v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:02.0
-3/input0
[    6.741839] i2c i2c-0: nForce2 SMBus adapter at 0x600
[    6.741856] i2c i2c-1: nForce2 SMBus adapter at 0x700
[    6.904068] EDAC MC: Ver: 2.1.0
[    6.927640] AMD64 EDAC driver v3.4.0
[    6.927747] EDAC amd64: DRAM ECC disabled.
[    6.927754] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.
[    6.927755]  Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.
[    6.927757]  (Note that use of the override may cause unknown side effects.)
[    7.182013] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[    7.182018] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[    7.182182] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[    7.182187] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI
21 (level, low) -> IRQ 21
[    7.182189] hda_intel: Disabling MSI
[    7.182221] HDA Intel 0000:00:07.0: setting latency timer to 64
[    9.052849] Adding 5957244k swap on /dev/sdb5.  Priority:-1
extents:1 across:5957244k
[   10.426819] loop: module loaded
[   14.096638] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[   15.546939] RPC: Registered named UNIX socket transport module.
[   15.546942] RPC: Registered udp transport module.
[   15.546944] RPC: Registered tcp transport module.
[   15.546945] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.582310] FS-Cache: Loaded
[   15.604585] FS-Cache: Netfs 'nfs' registered for caching
[   15.614768] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.047769] fuse init (API version 7.16)
[   24.296019] eth0: no IPv6 routers present
[   24.336745] device eth0 entered promiscuous mode

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version** Loaded modules:
Module                  Size  Used by
fuse                   62334  1
nfsd                  260697  2
nfs                   259361  0
lockd                  71503  2 nfsd,nfs
fscache                36721  1 nfs
auth_rpcgss            37204  2 nfsd,nfs
nfs_acl                12511  2 nfsd,nfs
sunrpc                168873  6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
loop                   22711  0
firewire_sbp2          18062  0
snd_hda_codec_via      56995  1
snd_hda_intel          26140  1
snd_hda_codec          72699  2 snd_hda_codec_via,snd_hda_intel
snd_hwdep              13186  1 snd_hda_codec
snd_pcm_oss            41257  0
snd_mixer_oss          17969  1 snd_pcm_oss
snd_pcm                68104  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi           12848  0
snd_rawmidi            23297  1 snd_seq_midi
snd_seq_midi_event     13316  1 snd_seq_midi
snd_seq                45208  2 snd_seq_midi,snd_seq_midi_event
snd_timer              22581  2 snd_pcm,snd_seq
snd_seq_device         13137  3 snd_seq_midi,snd_rawmidi,snd_seq
edac_core              35343  0
i2c_nforce2            12584  0
snd                    52823  13
snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,s
nd_rawmidi,snd_seq,snd_timer,snd_seq_device
evdev                  17558  3
hid_a4tech             12524  0
soundcore              13152  1 snd
edac_mce_amd           17103  0
i2c_core               23909  1 i2c_nforce2
asus_atk0110           17294  0
video                  17707  0
pcspkr                 12579  0
snd_page_alloc         13043  2 snd_hda_intel,snd_pcm
wmi                    13243  0
processor              27942  0
thermal_sys            17949  2 video,processor
button                 12930  0
ext2                   63732  6
mbcache                13066  1 ext2
dm_mod                 63164  18
usbhid                 40516  1
hid                    73172  2 hid_a4tech,usbhid
ums_cypress            12477  0
usb_storage            47996  3 ums_cypress
sr_mod                 21811  0
uas                    13299  0
sg                     25985  0
cdrom                  35093  1 sr_mod
sd_mod                 36259  9
crc_t10dif             12348  1 sd_mod
ata_generic            12479  0
ohci_hcd               26576  0
pata_amd               13276  2
firewire_ohci          35553  0
ahci                   25089  2
libahci                22767  1 ahci
firewire_core          48371  2 firewire_sbp2,firewire_ohci
crc_itu_t              12347  1 firewire_core
ehci_hcd               40090  0
forcedeth              49427  0
libata                149043  4 ata_generic,pata_amd,ahci,libahci
scsi_mod              162442  8
firewire_sbp2,ums_cypress,usb_storage,sr_mod,uas,sg,sd_mod,libata
usbcore               124242  8
usbhid,ums_cypress,usb_storage,uas,ohci_hcd,ehci_hcd

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
    link/ether e0:cb:4e:ce:bd:8e brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.190/24 brd 192.168.1.255 scope global eth0
    inet6 fe80::e2cb:4eff:fece:bd8e/64 scope link
       valid_lft forever preferred_lft forever
bios_vendor: American Megatrends Inc.
bios_version: 0603
board_vendor: ASUSTeK Computer INC.
board_name: M4N98TD EVO
board_version: Rev 2.00

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed
multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:  509875    3952    0    0    0     0          0         0
509875    3952    0    0    0     0       0          0
  eth0:   14044      81    0    0    0     0          0         0
14402     111    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    4041 total packets received
    3 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    4032 incoming packets delivered
    4037 requests sent out
    2 dropped because of missing route
Icmp:
    2 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 2
    2 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 2
IcmpMsg:
        InType3: 2
        OutType3: 2
Tcp:
    295 active connections openings
    290 passive connection openings
    0 failed connection attempts
    577 connection resets received
    0 connections established
    3972 segments received
    3975 segments send out
    0 segments retransmited
    0 bad segments received.
    290 resets sent
Udp:
    56 packets received
    2 packets to unknown port received.
    0 packet receive errors
    58 packets sent
UdpLite:
TcpExt:
    1 TCP sockets finished time wait in fast timer
    352 packets directly queued to recvmsg prequeue.
    3594 bytes directly received in process context from prequeue
    889 packet headers predicted
    58 packets header predicted and directly queued to user
    1167 acknowledgments not containing data payload received
    383 predicted acknowledgments
    2 connections reset due to unexpected data
    288 connections reset due to early user close
IpExt:
    InMcastPkts: 12
    OutMcastPkts: 14
    InOctets: 525518
    OutOctets: 518056
    InMcastOctets: 2917
    OutMcastOctets: 2997

*** Device features:
eth0: 0x60014823
lo: 0xa01b7c65

** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200]
Memory Controller [10de:0754] (rev a2)
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:01.0 ISA bridge [0601]: nVidia Corporation MCP78S [GeForce 8200]
LPC Bridge [10de:075d] (rev a2)
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: I/O ports at 0900 [size=256]

00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus
[10de:0752] (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 0e00 [size=64]
        Region 4: I/O ports at 0600 [size=64]
        Region 5: I/O ports at 0700 [size=64]
        Capabilities: <access denied>
        Kernel driver in use: nForce2_smbus

00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200]
Memory Controller [10de:0751] (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200]
Co-Processor [10de:0753] (rev a2)
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin B routed to IRQ 7
        Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]

00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200]
Memory Controller [10de:0568] (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce
8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-i
f 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f7e7e000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: ohci_hcd

00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce
8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-i
f 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin B routed to IRQ 22
        Region 0: Memory at f7e7fc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce
8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-i
f 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at f7e7d000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: ohci_hcd

00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce
8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-i
f 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin B routed to IRQ 21
        Region 0: Memory at f7e7f800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200]
IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP Pri
P])
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [size=1]
        Region 4: I/O ports at ffa0 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: pata_amd

00:07.0 Audio device [0403]: nVidia Corporation
MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev
a1)
        Subsystem: ASUSTeK Computer Inc. Device [1043:83c5]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (500ns min, 1250ns max)
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at f7e78000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel

00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200]
PCI Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive
 decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: f7f00000-f7ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200]
SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2)
(prog-if 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc. Device [1043:82e7]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 40
        Region 0: I/O ports at c080 [size=8]
        Region 1: I/O ports at c000 [size=4]
        Region 2: I/O ports at bc00 [size=8]
        Region 3: I/O ports at b880 [size=4]
        Region 4: I/O ports at b800 [size=16]
        Region 5: Memory at f7e76000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet
[10de:0760] (rev a2)
        Subsystem: ASUSTeK Computer Inc. Device [1043:8235]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (250ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 41
        Region 0: Memory at f7e7c000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at b480 [size=8]
        Region 2: Memory at f7e7f400 (32-bit, non-prefetchable) [size=256]
        Region 3: Memory at f7e7f000 (32-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>
        Kernel driver in use: forcedeth

00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200]
PCI Express Bridge [10de:0778] (rev a1) (prog-if 00 [Nor
mal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: f8000000-fbffffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:13.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200]
PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal deco
de])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200]
PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal deco
de])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor HyperTransport Configuration [1022:1200]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Address Map [1022:1201]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor DRAM Controller [1022:1202]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-

        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Miscellaneous Control [1022:1203]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Link Control [1022:1204]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

01:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8
[Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (r
ev c0) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (8000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f7fff800 (32-bit, non-prefetchable) [size=2K]
        Region 1: I/O ports at dc00 [size=128]
        Capabilities: <access denied>
        Kernel driver in use: firewire_ohci

02:00.0 PCI bridge [0604]: nVidia Corporation NF200 PCIe 2.0 switch
for mainboards [10de:05b1] (rev a2) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=02, secondary=03, subordinate=05, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: f8000000-fbffffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

03:00.0 PCI bridge [0604]: nVidia Corporation NF200 PCIe 2.0 switch
for mainboards [10de:05b1] (rev a2) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=03, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: f8000000-fbffffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

03:02.0 PCI bridge [0604]: nVidia Corporation NF200 PCIe 2.0 switch
for mainboards [10de:05b1] (rev a2) (prog-if 00 [Normal
decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=03, secondary=05, subordinate=05, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

04:00.0 VGA compatible controller [0300]: nVidia Corporation G98
[GeForce 8400 GS] [10de:06e4] (rev a1) (prog-if 00 [VGA con
troller])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8321]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
        Region 5: I/O ports at ec00 [size=128]
        Expansion ROM at fafe0000 [disabled] [size=128K]
        Capabilities: <access denied>


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04b4:6830 Cypress Semiconductor Corp.
CY7C68300A EZ-USB AT2 USB 2.0 to ATA/ATAPI
Bus 002 Device 002: ID 13fe:1d00 Kingston Technology Company Inc.
DataTraveler 2.0 1GB/4GB Flash Drive / Patriot Xporter 4GB
 Flash Drive
Bus 004 Device 002: ID 051d:0002 American Power Conversion
Uninterruptible Power Supply
Bus 003 Device 002: ID 09da:0006 A4 Tech Co., Ltd Optical Mouse WOP-35
/ Trust 450L Optical Mouse

-- System Information:
Debian Release: wheezy/sid
  APT prefers oldstable
  APT policy: (500, 'oldstable'), (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.ISO-8859-15, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.0.0-1-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.40     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.99       tools for generating an initramfs
ii  linux-base                    3.3        Linux image base package
ii  module-init-tools             3.16-1     tools for managing Linux kernel mo

Versions of packages linux-image-3.0.0-1-amd64 recommends:
ii  firmware-linux-free           3          Binary firmware for various driver

Versions of packages linux-image-3.0.0-1-amd64 suggests:
pn  grub-pc | extlinux | lilo     <none>     (no description available)
pn  linux-doc-3.0.0               <none>     (no description available)

Versions of packages linux-image-3.0.0-1-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk:
  linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true
  linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false
  linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64:



Reply to: