[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#605909: marked as done (linux-image-2.6.32-5-amd64: Kernel freeze when running on Lenovo x100e laptop (trace included))

Your message dated Wed, 29 Jun 2011 02:11:37 +0400
with message-id <20110628221137.GA4201@algol.martchukov.com>
and subject line This particular behaviour no longer appears
has caused the Debian Bug report #605909,
regarding linux-image-2.6.32-5-amd64: Kernel freeze when running on Lenovo x100e laptop (trace included)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
605909: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=605909
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-2.6
Version: 2.6.32-28
Severity: normal
Tags: upstream

I found my laptop Lenovo x100e to be freezing when running.

Here are some details that I found out regarding the freeze:

It looks to be happening only when the display is powered off. E.g. it
does not freeze if I am working in Xorg, but when left idle it will
freeze in around an hour (I used ping from remote machine to get
timings plus found the trace in kern.log).

After the freeze the system does not react on any events like keyboard
or mouse and does not react on Ctrl+Alt+Del. It also becomes not
accessible by SSH. The only way to restore the system is by powering it
off and on.

Here is the trace that I have found in the kern.log:

Dec  4 15:02:36 algol kernel: [ 2778.537126] ------------[ cut here ]------------
Dec  4 15:02:36 algol kernel: [ 2778.537140] WARNING: at /build/buildd-linux-2.6_2.6.32-28-amd64-EUJiNq/linux-2.6-2.6.32/debian/build/source_amd64_none/net/sched/sch_g
eneric.c:261 dev_watchdog+0xe2/0x194()
Dec  4 15:02:36 algol kernel: [ 2778.537145] Hardware name: 3508RL6
Dec  4 15:02:36 algol kernel: [ 2778.537147] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out
Dec  4 15:02:36 algol kernel: [ 2778.537150] Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables powernow_k8 cpufreq_u
serspace cpufreq_stats cpufreq_powersave cpufreq_conservative parport_pc ppdev lp parport sco bridge stp bnep rfcomm l2cap bluetooth kvm_amd kvm uinput fuse loop joyde
v snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_
device uvcvideo videodev rfkill v4l1_compat v4l2_compat_ioctl32 edac_core led_class snd video fglrx(P) wmi i2c_piix4 output nvram ac i2c_core edac_mce_amd k8temp sound
core battery snd_page_alloc shpchp psmouse button processor pci_hotplug serio_raw evdev pcspkr ext4 mbcache jbd2 crc16 sha256_generic aes_x86_64 aes_generic cbc dm_cry
pt dm_mod usb_storage sd_mod crc_t10dif ohci_hcd ahci thermal ehci_hcd libata r8169 mii thermal_sys usbcore nls_base scsi_mod [last unloaded: scsi_wait_scan]
Dec  4 15:02:36 algol kernel: [ 2778.537239] Pid: 0, comm: swapper Tainted: P           2.6.32-5-amd64 #1
Dec  4 15:02:36 algol kernel: [ 2778.537242] Call Trace:
Dec  4 15:02:36 algol kernel: [ 2778.537245]  <IRQ>  [<ffffffff81261c12>] ? dev_watchdog+0xe2/0x194
Dec  4 15:02:36 algol kernel: [ 2778.537254]  [<ffffffff81261c12>] ? dev_watchdog+0xe2/0x194
Dec  4 15:02:36 algol kernel: [ 2778.537259]  [<ffffffff8104dd6c>] ? warn_slowpath_common+0x77/0xa3
Dec  4 15:02:36 algol kernel: [ 2778.537264]  [<ffffffff81261b30>] ? dev_watchdog+0x0/0x194
Dec  4 15:02:36 algol kernel: [ 2778.537268]  [<ffffffff8104ddf4>] ? warn_slowpath_fmt+0x51/0x59
Dec  4 15:02:36 algol kernel: [ 2778.537274]  [<ffffffff8104a252>] ? try_to_wake_up+0x2a7/0x2b9
Dec  4 15:02:36 algol kernel: [ 2778.537279]  [<ffffffff81261b04>] ? netif_tx_lock+0x3d/0x69
Dec  4 15:02:36 algol kernel: [ 2778.537285]  [<ffffffff8124c97c>] ? netdev_drivername+0x3b/0x40
Dec  4 15:02:36 algol kernel: [ 2778.537289]  [<ffffffff81261c12>] ? dev_watchdog+0xe2/0x194
Dec  4 15:02:36 algol kernel: [ 2778.537294]  [<ffffffff8103f9bb>] ? __wake_up+0x30/0x44
Dec  4 15:02:36 algol kernel: [ 2778.537300]  [<ffffffff8105a337>] ? run_timer_softirq+0x1c9/0x268
Dec  4 15:02:36 algol kernel: [ 2778.537306]  [<ffffffff811dc2db>] ? acpi_hw_read+0x4d/0x54
Dec  4 15:02:36 algol kernel: [ 2778.537312]  [<ffffffff811d34b7>] ? acpi_ev_fixed_event_detect+0x3b/0xbe
Dec  4 15:02:36 algol kernel: [ 2778.537318]  [<ffffffff81053aaf>] ? __do_softirq+0xdd/0x1a2
Dec  4 15:02:36 algol kernel: [ 2778.537322]  [<ffffffff811d3f0d>] ? acpi_ev_sci_xrupt_handler+0x1a/0x22
Dec  4 15:02:36 algol kernel: [ 2778.537335]  [<ffffffff81011cac>] ? call_softirq+0x1c/0x30
Dec  4 15:02:36 algol kernel: [ 2778.537340]  [<ffffffff8101322b>] ? do_softirq+0x3f/0x7c
Dec  4 15:02:36 algol kernel: [ 2778.537344]  [<ffffffff8105391e>] ? irq_exit+0x36/0x76
Dec  4 15:02:36 algol kernel: [ 2778.537348]  [<ffffffff81012922>] ? do_IRQ+0xa0/0xb6
Dec  4 15:02:36 algol kernel: [ 2778.537353]  [<ffffffff810114d3>] ? ret_from_intr+0x0/0x11
Dec  4 15:02:36 algol kernel: [ 2778.537355]  <EOI>  [<ffffffff81017587>] ? c1e_idle+0xeb/0xfb
Dec  4 15:02:36 algol kernel: [ 2778.537364]  [<ffffffff81017583>] ? c1e_idle+0xe7/0xfb
Dec  4 15:02:36 algol kernel: [ 2778.537369]  [<ffffffff8100feb1>] ? cpu_idle+0xa2/0xda
Dec  4 15:02:36 algol kernel: [ 2778.537376]  [<ffffffff814f3140>] ? early_idt_handler+0x0/0x71
Dec  4 15:02:36 algol kernel: [ 2778.537381]  [<ffffffff814f3cd1>] ? start_kernel+0x3dc/0x3e8
Dec  4 15:02:36 algol kernel: [ 2778.537386]  [<ffffffff814f33b7>] ? x86_64_start_kernel+0xf9/0x106
Dec  4 15:02:36 algol kernel: [ 2778.537389] ---[ end trace 6a992d9667c0a5ed ]---
Dec  4 15:02:36 algol kernel: [ 2778.552118] r8169: eth0: link up
Dec  4 15:12:14 algol kernel: [ 3355.016719] usb 2-1: reset high speed USB device using ehci_hcd and address 2
Dec  4 15:12:29 algol kernel: [ 3371.236072] r8169: eth0: link up

That is the final one in log before the reboot. However the system
stopped responding pings around 15:18:33 (I used ping -D -t 5 on another system to get
this info).

I am using ATI proprietary driver from debian fglrx-driver package.

Here are all the things that I have found in dmesg that might be
relevant:

[    1.040212] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[    1.041078] eth0: RTL8168d/8111d at 0xffffc9000037e000, c8:0a:a9:a6:3d:fa, XID 081000c0 IRQ 27
[    1.046624] r8169 0000:02:00.0: firmware: requesting rtl8168d-1.fw
[    1.051615] eth0: unable to apply firmware patch

[   11.235202] thinkpad_acpi: Not yet supported ThinkPad detected!

eth0 works in spite of missing rtl8168d-1.fw (not included in Debian
even in non-free).

Let me know if I can collect more infromation further to debug this
problem.

-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-28) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 25 18:02:11 UTC 2010

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/algolvg-root ro selinux=1 quiet

** Tainted: P (1)
 * Proprietary module has been loaded.

** Kernel log:
[   10.622222] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   10.633592] ACPI: AC Adapter [ACAD] (on-line)
[   10.633928] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   10.633999] ACPI: Power Button [PWRB]
[   10.645496] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   10.676299] Non-volatile memory driver v1.3
[   10.907263] ACPI: Battery Slot [BAT1] (battery present)
[   10.907533] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[   10.907605] ACPI: Sleep Button [SLPB]
[   10.908279] ACPI: WMI: Mapper loaded
[   10.910424] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[   10.918916] ACPI: Lid Switch [LID]
[   10.919046] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   10.919109] ACPI: Power Button [PWRF]
[   10.919609] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[   10.924899] acpi device:20: registered as cooling_device2
[   10.925958] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/LNXVIDEO:00/input/input7
[   10.926083] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   10.954323] EDAC MC: Ver: 2.1.0 Nov 25 2010
[   10.957718] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[   10.957725] shpchp 0000:00:01.0: Cannot reserve MMIO region
[   10.957834] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.975451] Linux video capture interface: v2.00
[   10.978637] EDAC amd64_edac:  Ver: 3.2.0 Nov 25 2010
[   10.978812] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[   10.978823] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   10.978825]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   10.978827]  (Note that use of the override may cause unknown side effects.)
[   10.978852] amd64_edac: probe of 0000:00:18.2 failed with error -22
[   10.979585] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0
[   11.122885] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   11.122892] Disabling lock debugging due to kernel taint
[   11.225411] [fglrx] Maximum main memory to use for locked dma buffers: 1642 MBytes.
[   11.225464] [fglrx]   vendor: 1002 device: 9612 count: 1
[   11.225934] [fglrx] ioport: bar 1, base 0x9000, size: 0x100
[   11.225957] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   11.225963] pci 0000:01:05.0: setting latency timer to 64
[   11.226420] [fglrx] Kernel PAT support is enabled
[   11.226456] [fglrx] module loaded - fglrx 8.77.5 [Aug 25 2010] with 1 minors
[   11.230073] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b1b4)
[   11.231513] input: Integrated Camera as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input8
[   11.231634] usbcore: registered new interface driver uvcvideo
[   11.231990] USB Video Class driver (v0.1.0)
[   11.235202] thinkpad_acpi: Not yet supported ThinkPad detected!
[   11.383520] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.629249] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b1/0xb40000/0xa0000
[   11.629258] serio: Synaptics pass-through port at isa0060/serio4/input0
[   11.684091] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   12.222242] loop: module loaded
[   13.067215] Adding 3903480k swap on /dev/mapper/algolvg-swap.  Priority:-1 extents:1 across:3903480k 
[   15.941715] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   16.002649] EXT4-fs (dm-2): mounted filesystem with ordered data mode
[   16.097238] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[   16.211849] EXT4-fs (dm-4): mounted filesystem with ordered data mode
[   16.273470] EXT4-fs (dm-5): mounted filesystem with ordered data mode
[   16.333321] EXT4-fs (dm-6): mounted filesystem with ordered data mode
[   16.384679] EXT4-fs (dm-7): mounted filesystem with ordered data mode
[   18.749327] fuse init (API version 7.13)
[   19.318613] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   19.616567] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input10
[   19.934387] kvm: Nested Virtualization enabled
[   20.795210] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[   22.758818] r8169: eth0: link up
[   22.758831] r8169: eth0: link up
[   25.859356] Bluetooth: Core ver 2.15
[   25.859443] NET: Registered protocol family 31
[   25.859446] Bluetooth: HCI device and connection manager initialized
[   25.859451] Bluetooth: HCI socket layer initialized
[   25.905439] Bluetooth: L2CAP ver 2.14
[   25.905442] Bluetooth: L2CAP socket layer initialized
[   26.062951] Bluetooth: RFCOMM TTY layer initialized
[   26.062958] Bluetooth: RFCOMM socket layer initialized
[   26.062960] Bluetooth: RFCOMM ver 1.11
[   26.163661] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.163665] Bluetooth: BNEP filters: protocol multicast
[   26.312363] Bridge firewalling registered
[   26.395452] Bluetooth: SCO (Voice Link) ver 0.6
[   26.395456] Bluetooth: SCO socket layer initialized
[   27.676540] lp: driver loaded but no devices found
[   27.796679] ppdev: user-space parallel port driver
[   29.090743] [fglrx] ATIF platform detected with notification ID: 0x81
[   29.586437] [fglrx] GART Table is not in FRAME_BUFFER range 
[   29.586851]   alloc irq_desc for 28 on node 0
[   29.586856]   alloc kstat_irqs on node 0
[   29.586872] fglrx_pci 0000:01:05.0: irq 28 for MSI/MSI-X
[   29.587907] [fglrx] Firegl kernel thread PID: 1624
[   29.588580] [fglrx] IRQ 28 Enabled
[   30.268722] [fglrx] Gart USWC size:552 M.
[   30.268727] [fglrx] Gart cacheable size:215 M.
[   30.268735] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   30.268739] [fglrx] Reserved FB block: Unshared offset:14ffb000, size:5000 
[   32.417475] powernow-k8: Found 1 AMD Athlon(tm) Neo X2 Dual Core Processor L335 processors (2 cpu cores) (version 2.20.00)
[   32.417541] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x19
[   32.417544] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
[   33.009098] Clocksource tsc unstable (delta = -250103453 ns)
[   33.160097] eth0: no IPv6 routers present
[   35.610527] Ebtables v2.0 registered
[   35.907812] ip_tables: (C) 2000-2006 Netfilter Core Team
[   36.126980] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   38.511974] lo: Disabled Privacy Extensions

** Model information
sys_vendor: LENOVO
product_name: 3508RL6
product_version: ThinkPad X100e
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 6XET46WW (1.29 )
board_vendor: LENOVO
board_name: 3508RL6
board_version: Not Available

** Loaded modules:
Module                  Size  Used by
ip6table_filter         2384  0 
ip6_tables             15075  1 ip6table_filter
iptable_filter          2258  0 
ip_tables              13899  1 iptable_filter
ebtable_nat             1588  0 
ebtables               13933  1 ebtable_nat
x_tables               12845  3 ip6_tables,ip_tables,ebtables
powernow_k8            10978  1 
cpufreq_userspace       1992  0 
cpufreq_stats           2659  0 
cpufreq_powersave        902  0 
cpufreq_conservative     5162  0 
parport_pc             18855  0 
ppdev                   5030  0 
lp                      7462  0 
parport                27954  3 parport_pc,ppdev,lp
sco                     7209  2 
bridge                 39630  0 
stp                     1440  1 bridge
bnep                    9427  2 
rfcomm                 29597  0 
l2cap                  24736  6 bnep,rfcomm
bluetooth              41827  6 sco,bnep,rfcomm,l2cap
kvm_amd                31862  0 
kvm                   214056  1 kvm_amd
uinput                  6376  1 
fuse                   50273  1 
loop                   11799  0 
joydev                  8459  0 
snd_hda_codec_conexant    21869  1 
snd_hda_intel          19987  1 
snd_hda_codec          54244  2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep               5380  1 snd_hda_codec
snd_pcm_oss            32591  0 
snd_mixer_oss          12606  1 snd_pcm_oss
snd_pcm                60503  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi            4400  0 
snd_rawmidi            15515  1 snd_seq_midi
snd_seq_midi_event      4628  1 snd_seq_midi
snd_seq                42881  2 snd_seq_midi,snd_seq_midi_event
snd_timer              15582  2 snd_pcm,snd_seq
snd_seq_device          4493  3 snd_seq_midi,snd_rawmidi,snd_seq
uvcvideo               51887  0 
fglrx                2452362  32 
rfkill                 13044  3 bluetooth
i2c_piix4               8328  0 
videodev               29993  1 uvcvideo
snd                    46446  13 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
shpchp                 26264  0 
edac_core              29261  0 
led_class               2433  0 
soundcore               4598  1 snd
video                  17445  0 
v4l1_compat            11442  2 uvcvideo,videodev
v4l2_compat_ioctl32     8474  1 videodev
nvram                   5077  0 
wmi                     4323  0 
psmouse                49777  0 
serio_raw               3752  0 
pci_hotplug            21203  1 shpchp
output                  1692  1 video
i2c_core               15712  2 i2c_piix4,videodev
edac_mce_amd            6433  0 
k8temp                  3283  0 
snd_page_alloc          6249  2 snd_hda_intel,snd_pcm
battery                 4998  0 
button                  4650  0 
processor              29935  1 powernow_k8
ac                      2192  0 
pcspkr                  1699  0 
evdev                   7352  18 
ext4                  289033  8 
mbcache                 5050  1 ext4
jbd2                   67015  1 ext4
crc16                   1319  2 l2cap,ext4
sha256_generic          8692  2 
aes_x86_64              7340  2 
aes_generic            25714  1 aes_x86_64
cbc                     2539  1 
dm_crypt               10664  1 
dm_mod                 53770  27 dm_crypt
sd_mod                 29889  3 
crc_t10dif              1276  1 sd_mod
usb_storage            39561  0 
ohci_hcd               19212  0 
ahci                   32374  2 
thermal                11674  0 
libata                133616  1 ahci
thermal_sys            11942  3 video,processor,thermal
r8169                  28925  0 
ehci_hcd               31135  0 
mii                     3210  1 r8169
usbcore               122034  5 uvcvideo,usb_storage,ohci_hcd,ehci_hcd
nls_base                6377  1 usbcore
scsi_mod              122149  3 sd_mod,usb_storage,libata

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
    link/ether c8:0a:a9:a6:3d:fa brd ff:ff:ff:ff:ff:ff
    inet 192.168.154.57/24 brd 192.168.154.255 scope global eth0
    inet6 fe80::ca0a:a9ff:fea6:3dfa/64 scope link 
       valid_lft forever preferred_lft forever
3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN 
    link/ether aa:18:32:5d:48:bc brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eth0: 1004670    1493    0    0    0     0          0         0   207743    1693    0    0    0     0       0          0
  pan0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    1489 total packets received
    2 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    1487 incoming packets delivered
    1644 requests sent out
Icmp:
    167 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        echo requests: 164
        echo replies: 3
    174 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 7
        echo request: 3
        echo replies: 164
IcmpMsg:
        InType0: 3
        InType8: 164
        OutType0: 164
        OutType3: 7
        OutType8: 3
Tcp:
    90 active connections openings
    0 passive connection openings
    1 failed connection attempts
    3 connection resets received
    0 connections established
    1026 segments received
    1141 segments send out
    59 segments retransmited
    0 bad segments received.
    23 resets sent
Udp:
    287 packets received
    7 packets to unknown port received.
    0 packet receive errors
    268 packets sent
UdpLite:
TcpExt:
    47 TCP sockets finished time wait in fast timer
    37 delayed acks sent
    Quick ack mode was activated 1 times
    599 packet headers predicted
    128 acknowledgments not containing data payload received
    6 predicted acknowledgments
    9 other TCP timeouts
    4 connections reset due to unexpected data
    3 connections reset due to early user close
    8 connections aborted due to timeout
IpExt:
    InMcastPkts: 19
    OutMcastPkts: 21
    InBcastPkts: 26
    InOctets: 986347
    OutOctets: 178688
    InMcastOctets: 3637
    OutMcastOctets: 3717
    InBcastOctets: 5044

*** Device features:
eth0: 0x180
lo: 0x13865
pan0: 0xff3865

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
	Subsystem: Lenovo Device [17aa:21b2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 99
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: d0100000-d02fffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: 80000000-800fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: d0300000-d03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo Device [17aa:21b2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at 8420 [size=8]
	Region 1: I/O ports at 8414 [size=4]
	Region 2: I/O ports at 8418 [size=8]
	Region 3: I/O ports at 8410 [size=4]
	Region 4: I/O ports at 8400 [size=16]
	Region 5: Memory at d0607000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: Lenovo Device [17aa:21b2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d0604000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
	Subsystem: Lenovo Device [17aa:21b2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d0605000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:21b2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at d0607400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: Lenovo Device [17aa:21b2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at d0606000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:21b2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 19
	Region 0: Memory at d0607800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c)
	Subsystem: Lenovo Device [17aa:21b2]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: piix4_smbus

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
	Subsystem: Lenovo Device [17aa:21b2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin ? routed to IRQ 16
	Region 0: Memory at d0600000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
	Subsystem: Lenovo Device [17aa:21b2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k8temp

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] (prog-if 00 [VGA controller])
	Subsystem: Lenovo Device [17aa:21b2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
	Region 1: I/O ports at 9000 [size=256]
	Region 2: Memory at d0200000 (32-bit, non-prefetchable) [size=64K]
	Region 5: Memory at d0100000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: fglrx_pci

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
	Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: I/O ports at a000 [size=256]
	Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
	[virtual] Expansion ROM at d0020000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8172] (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:e020]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at b000 [size=256]
	Region 1: Memory at d0300000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 04f2:b1b4 Chicony Electronics Co., Ltd Lenovo Integrated Camera
Bus 002 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (650, 'testing'), (600, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.36     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98.5     tools for generating an initramfs
ii  linux-base                    2.6.32-28  Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii  firmware-linux-free           2.6.32-28  Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
ii  firmware-linux-nonfree        0.27       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
  linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
  linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:

--- End Message ---
--- Begin Message --- 
Version: 2.6.37-1-amd64

This particular behaviour is not reproducable since 2.6.37-1-amd64.

-- 
Anton Martchukov
http://www.martchukov.com

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: