Bug#631567: [linux-source-2.6.39] Recompiled kernel crash on kms with radeon HD6670
No, I was wrong, freeze on KMS also with CONFIG_AGP=y,
CONFIG_AGP_AMD64=y and CONFIG_AGP_ATI=y
When I can successfully boot the system, (or I boot with a precompiled
kernel) I see
"failed to evaluate ATIF got AE_BAD_PARAMETER"
during the loading of KMS/DRM modules
I have attached the dmesg output of a complete boot with my custom kernel
Unfortunately I no longer have a kernel 2.6.38 to make comparisons with
2.6.39. I trusted at the first boot and I deleted the old kernel.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.39 (2.6.39) (root@AlexKidd) (gcc version 4.6.1 20110526 (prerelease) (Debian 4.6.0-10) ) #6 SMP Sat Jun 25 14:19:05 CEST 2011
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000098000 (usable)
BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: System manufacturer System Product Name/M4A89GTD-PRO, BIOS 2101 04/08/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x130000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
found SMP MP-table at [c00ff780] ff780
initial memory mapped : 0 - 01c00000
Base memory trampoline at [c0097000] 97000 size 4096
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 1bfb000-1c00000
RAMDISK: 37c32000 - 37e11000
Allocated new RAMDISK: 37a1f000 - 37bfd046
Move RAMDISK from 0000000037c32000 - 0000000037e10045 to 37a1f000 - 37bfd045
ACPI: RSDP 000fba90 00024 (v02 ACPIAM)
ACPI: XSDT cfe90100 0005C (v01 040811 XSDT1236 20110408 MSFT 00000097)
ACPI: FACP cfe90290 000F4 (v03 040811 FACP1236 20110408 MSFT 00000097)
ACPI: DSDT cfe90450 0E70B (v01 A1504 A1504000 00000000 INTL 20060113)
ACPI: FACS cfea8000 00040
ACPI: APIC cfe90390 0007C (v01 040811 APIC1236 20110408 MSFT 00000097)
ACPI: MCFG cfe90410 0003C (v01 040811 OEMMCFG 20110408 MSFT 00000097)
ACPI: OEMB cfea8040 00072 (v01 040811 OEMB1236 20110408 MSFT 00000097)
ACPI: SRAT cfe9f8a0 00108 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET cfe9f9b0 00038 (v01 040811 OEMHPET 20110408 MSFT 00000097)
ACPI: SSDT cfe9f9f0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
3972MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x00000098
0: 0x00000100 -> 0x000cfe90
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048088
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3944 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 7945 pages used for memmap
HighMem zone: 811913 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 6 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at cff00000 (gap: cff00000:2ff00000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f5400000 s25088 r0 d24064 u262144
pcpu-alloc: s25088 r0 d24064 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038359
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39 root=UUID=5d4c58c4-d772-4ea2-92bb-c72949c35731 ro bttv.automute=0
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00037bfe:00130000)
Memory: 4144676k/4980736k available (4443k kernel code, 47676k reserved, 2535k data, 420k init, 3279432k highmem)
virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc16d1000 - 0xc173a000 ( 420 kB)
.data : 0xc1456cab - 0xc16d0c00 (2535 kB)
.text : 0xc1000000 - 0xc1456cab (4443 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:512
CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2809.143 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.28 BogoMIPS (lpj=2809143)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20110316
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
CPU 1 irqstacks, hard=f4c8e000 soft=f4c90000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 97000
Initializing CPU#1
System has AMD C1E enabled
CPU 2 irqstacks, hard=f4cba000 soft=f4cbc000
#2
smpboot cpu 2: start_ip = 97000
Switch to broadcast mode on CPU1
Initializing CPU#2
Switch to broadcast mode on CPU2
CPU 3 irqstacks, hard=f4cc8000 soft=f4cca000
#3
smpboot cpu 3: start_ip = 97000
Initializing CPU#3
Switch to broadcast mode on CPU3
CPU 4 irqstacks, hard=f4cd6000 soft=f4cd8000
#4
smpboot cpu 4: start_ip = 97000
Initializing CPU#4
Switch to broadcast mode on CPU4
CPU 5 irqstacks, hard=f4d04000 soft=f4d06000
#5 Ok.
smpboot cpu 5: start_ip = 97000
Initializing CPU#5
Brought up 6 CPUs
Switch to broadcast mode on CPU5
Total of 6 processors activated (33713.95 BogoMIPS).
Switch to broadcast mode on CPU0
devtmpfs: initialized
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffdfffff]
TOM2: 0000000130000000 aka 4864M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
bus: 00 index 3 [mem 0xf0000000-0xffffffff]
bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
pci 0000:00:03.0: [1022:960b] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
pci 0000:00:11.0: reg 24: [mem 0xfe6ffc00-0xfe6fffff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfe6fe000-0xfe6fefff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfe6ff800-0xfe6ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfe6fd000-0xfe6fdfff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfe6ff400-0xfe6ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfe6f4000-0xfe6f7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfe6fc000-0xfe6fcfff]
pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
pci 0000:00:15.0: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:16.0: reg 10: [mem 0xfe6f3000-0xfe6f3fff]
pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:16.2: reg 10: [mem 0xfe6ff000-0xfe6ff0ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:01:00.0: [1002:6758] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe7e0000-0xfe7fffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xb000-0xb0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe7c0000-0xfe7dffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa90] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfe7bc000-0xfe7bffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [197b:2361] type 0 class 0x000101
pci 0000:02:00.0: reg 24: [mem 0xfe8fe000-0xfe8fffff]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: [197b:2361] type 0 class 0x000101
pci 0000:02:00.1: reg 10: [io 0xcc00-0xcc07]
pci 0000:02:00.1: reg 14: [io 0xc880-0xc883]
pci 0000:02:00.1: reg 18: [io 0xc800-0xc807]
pci 0000:02:00.1: reg 1c: [io 0xc480-0xc483]
pci 0000:02:00.1: reg 20: [io 0xc400-0xc40f]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:05.0: [109e:036e] type 0 class 0x000400
pci 0000:03:05.0: reg 10: [mem 0xfdeff000-0xfdefffff pref]
pci 0000:03:05.1: [109e:0878] type 0 class 0x000480
pci 0000:03:05.1: reg 10: [mem 0xfdefe000-0xfdefefff pref]
pci 0000:03:07.0: [1106:3044] type 0 class 0x000c00
pci 0000:03:07.0: reg 10: [mem 0xfe9fb800-0xfe9fbfff]
pci 0000:03:07.0: reg 14: [io 0xdc00-0xdc7f]
pci 0000:03:07.0: supports D2
pci 0000:03:07.0: PME# supported from D2 D3hot D3cold
pci 0000:03:07.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:04:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:04:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:15.0: PCI bridge to [bus 04-04]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000098000 - 000000000009ffff
reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xcff00000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [mem 0xfed00000-0xfed003ff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: [mem 0xfec00000-0xfec00fff]
pnp 00:07: [mem 0xfee00000-0xfee00fff]
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00b1]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x040b]
pnp 00:08: [io 0x04d6]
pnp 00:08: [io 0x0c00-0x0c01]
pnp 00:08: [io 0x0c14]
pnp 00:08: [io 0x0c50-0x0c51]
pnp 00:08: [io 0x0c52]
pnp 00:08: [io 0x0c6c]
pnp 00:08: [io 0x0c6f]
pnp 00:08: [io 0x0cd0-0x0cd1]
pnp 00:08: [io 0x0cd2-0x0cd3]
pnp 00:08: [io 0x0cd4-0x0cd5]
pnp 00:08: [io 0x0cd6-0x0cd7]
pnp 00:08: [io 0x0cd8-0x0cdf]
pnp 00:08: [io 0x0800-0x089f]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0b00-0x0b1f]
pnp 00:08: [io 0x0b20-0x0b3f]
pnp 00:08: [io 0x0900-0x090f]
pnp 00:08: [io 0x0910-0x091f]
pnp 00:08: [io 0xfe00-0xfefe]
pnp 00:08: [io 0x0060-0x005f disabled]
pnp 00:08: [io 0x0064-0x0063 disabled]
pnp 00:08: [mem 0xcff00000-0xcfffffff]
pnp 00:08: [mem 0xffb80000-0xffbfffff]
pnp 00:08: [mem 0xfec10000-0xfec1001f]
pnp 00:08: [mem 0xfed80000-0xfed80fff]
pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x040b] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c51] has been reserved
system 00:08: [io 0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0800-0x089f] has been reserved
system 00:08: [io 0x0b00-0x0b1f] has been reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0900-0x090f] has been reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io 0x0230-0x023f]
pnp 00:0a: [io 0x0290-0x029f]
pnp 00:0a: [io 0x0f40-0x0f4f]
pnp 00:0a: [io 0x0a30-0x0a3f]
system 00:0a: [io 0x0230-0x023f] has been reserved
system 00:0a: [io 0x0290-0x029f] has been reserved
system 00:0a: [io 0x0f40-0x0f4f] has been reserved
system 00:0a: [io 0x0a30-0x0a3f] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000cffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0xcfefffff]
pnp 00:0c: [mem 0xfec00000-0xffffffff]
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:0a.0: bridge window [mem pref disabled]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
pci 0000:00:15.0: PCI bridge to [bus 04-04]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem disabled]
pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1916k freed
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
microcode: CPU0: patch_level=0x010000bf
microcode: CPU1: patch_level=0x010000bf
microcode: CPU2: patch_level=0x010000bf
microcode: CPU3: patch_level=0x010000bf
microcode: CPU4: patch_level=0x010000bf
microcode: CPU5: patch_level=0x010000bf
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1309019801.359:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NTFS driver 2.1.30 [Flags: R/O].
ROMFS MTD (C) 2007 Red Hat, Inc.
fuse init (API version 7.16)
msgmni has been set to 1693
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:0a.0: setting latency timer to 64
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: processor limited to max C-state 1
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff00 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff80 irq 19
ahci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:02:00.0: JMB361 has only one port
ahci 0000:02:00.0: forcing port_map 0x3 -> 0x1
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:02:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 18
ata8: DUMMY
pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_jmicron 0000:02:00.1: setting latency timer to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: (unregistered net_device): unknown MAC, using family default
r8169 0000:04:00.0: no MSI. Back to INTx.
r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xf8448000, bc:ae:c5:21:a2:ca, XID 0c200000 IRQ 16
firewire_ohci 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
firewire_ohci: Added fw-ohci device 0000:03:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe6ff800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.39 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe6ff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.39 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe6ff000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.39 ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe6fe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.39 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe6fd000
ata9.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66
ata9.01: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66
ata9.00: configured for UDMA/66
ata9.01: configured for UDMA/66
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.39 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe6fc000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.39 ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe6f3000
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: MAXTOR STM3250310AS, 3.AAC, max UDMA/133
ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: Maxtor 6Y080M0, YAR51HW0, max UDMA/133
ata1.00: 160086528 sectors, multi 0: LBA
ata3.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.39 ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
ata7: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 250
Linux video capture interface: v2.00
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
i2c-core: driver [msp3400] using legacy suspend method
i2c-core: driver [msp3400] using legacy resume method
bttv: driver version 0.9.18 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
bttv0: Bt878 (rev 17) at 0000:03:05.0, irq: 20, latency: 64, mmio: 0xfdeff000
bttv0: detected: Terratec TValue Radio [card=66], PCI subsystem ID is 153b:1135
bttv0: using: Terratec TValueRadio [card=66,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00feefff [init]
bttv0: tuner type=5
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
bttv0: audio absent, no audio device found!
All bytes are equal. It is not a TEA5767
tuner 0-0060: Tuner -1 found with type(s) Radio TV.
tuner-simple 0-0060: creating new instance
tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ata2.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
. ok
pwc: Philips webcam module version 10.0.14 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
usbcore: registered new interface driver Philips webcam
ATK0110 ATK0110:00: EC enabled
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: position_fix set to 1 for device 1043:8410
hda_codec: ALC892: BIOS auto-probing.
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
HDA Intel 0000:01:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:01:00.1: setting latency timer to 64
ALSA device list:
#0: HDA ATI SB at 0xfe6f4000 irq 16
#1: HD-Audio Generic at 0xfe7bc000 irq 16
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 4
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ata2.00: configured for UDMA/133
CCID: Activated CCID 2 (TCP-like)
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
CCID: Activated CCID 3 (TCP-Friendly Rate Control)
sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA MAXTOR STM325031 3.AA PQ: 0 ANSI: 5
sctp: Hash tables configured (established 65536 bind 65536)
TIPC: Activated (version 2.0.0 compiled Jun 24 2011 22:24:14)
sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 8:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
sr 8:0:0:0: Attached scsi generic sg3 type 5
scsi 8:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.02 PQ: 0 ANSI: 5
NET: Registered protocol family 30
TIPC: Started in single node mode
powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor (6 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8: 0 : pstate 0 (2800 MHz)
powernow-k8: 1 : pstate 1 (2200 MHz)
powernow-k8: 2 : pstate 2 (1500 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
Using IPI Shortcut mode
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 8:0:1:0: Attached scsi CD-ROM sr1
rtc_cmos 00:03: setting system clock to 2011-06-25 16:36:42 UTC (1309019802)
sr 8:0:1:0: Attached scsi generic sg4 type 5
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
sdc: sdc1 sdc2 sdc3 sdc4
sd 2:0:0:0: [sdc] Attached SCSI disk
sdb:
sd 1:0:0:0: [sdb] Attached SCSI disk
firewire_core: created device fw0: GUID 001e8c0000e13d18, S400
Freeing unused kernel memory: 420k freed
udevd[1594]: starting version 171
usb 5-1: new low speed USB device number 2 using ohci_hcd
usb 5-1: New USB device found, idVendor=046d, idProduct=c03d
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB-PS/2 Optical Mouse
usb 5-1: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input5
generic-usb 0003:046D:C03D.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1/input0
Refined TSC clocksource calibration: 2809.479 MHz.
Switching to clocksource tsc
usb 4-1: new full speed USB device number 2 using ohci_hcd
usb 4-1: New USB device found, idVendor=0471, idProduct=0312
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 4-1: SerialNumber: 01690000D6747201
pwc: Philips PCVC750K (ToUCam Pro Scan) USB webcam detected.
pwc: Registered as video1.
input: PWC snapshot button as /devices/pci0000:00/0000:00:12.0/usb4/4-1/input/input6
REISERFS (device sdc1): found reiserfs format "3.6" with standard journal
REISERFS (device sdc1): using ordered data mode
REISERFS (device sdc1): journal params: device sdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sdc1): checking transaction log (sdc1)
REISERFS (device sdc1): Using r5 hash to sort names
udevd[1806]: starting version 171
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (TURKS 0x1002:0x6758).
[drm] register mmio base: 0xFE7E0000
[drm] register mmio size: 131072
ATOM BIOS: 6758.13.12.0.8.AS01
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 433802 kiB.
[TTM] Zone highmem: Available graphics memory: 2073518 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading TURKS Microcode
radeon 0000:01:00.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
failed to evaluate ATIF got AE_BAD_PARAMETER
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A
[drm] HPD2
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DVI-D
[drm] HPD1
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0
Adding 1004056k swap on /dev/sdc2. Priority:-1 extents:1 across:1004056k
r8169 0000:04:00.0: eth0: link down
r8169 0000:04:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
Reply to: