Bug#515201: linux-image: sata drive connected via marvell controller crashes
found 515201 linux-2.6/2.6.30-8~bpo50+1
found 515201 linux-2.6/2.6.32-34squeeze1
quit
Hi Eduardo,
egross@bol.com.br wrote:
> The following link (http://wiki.debian.org/pata_marvell) deals with
> the issue in debian lenny. I tried it and it works also with my
> squeeze kernel, 2.6.32-5-amd64.
Interesting. For reference, that page suggests:
1. Enable the Marvell controller in the BIOS.
2. Disable the pata_marvell module, by putting a .conf file with
install pata_marvell /bin/true
in /etc/modprobe.d.
3. Pass the marvell_enable=1 parameter to the ahci module, by putting
a .conf file with
options ahci marvell_enable=1
in /etc/modprobe.d.
and regenerating the initramfs. Do you know whether it is (2) or (3)
that causes your system to boot correctly?
The photos from Mark's original report are (understandably) no longer
online. Could you describe the messages from bootup, for example by
taking a new photo?
If you have time for it, it would also be nice to try a 3.0 release
candidate from experimental and see if that changes anything (it
probably won't, but it's good to check).
https://bugzilla.kernel.org/show_bug.cgi?id=12075 upstream has some
pointers.
Thanks much.
Jonathan
Reply to: