Bug#630900: linux-image-2.6.32-5-kirkwood: br2684.ko does not exist, # CONFIG_ATM_BR2684 is not set
Package: linux-2.6
Version: 2.6.32-34squeeze1
Severity: normal
I run Debian Squeeze on Seagate Dockstar. I want to use it together with USB modem as a router
instead of current i386 platform which I use now. During migration it found out that kernel
module is absent for this kernel, although it's included in:
/lib/modules/2.6.39-2-iop32x/kernel/net/atm/br2684.ko
linux-image-2.6.39-2-iop32x [armel]
/lib/modules/2.6.39-2-ixp4xx/kernel/net/atm/br2684.ko
linux-image-2.6.39-2-ixp4xx [armel]
It breaks compatibility and br2684ctl is present in armel architecture, but looks like it's not
usable here. It seems that option for compiling this module is not set:
grep -i br2684 /boot/config-2.6.32-5-kirkwood
# CONFIG_ATM_BR2684 is not set
On i386 (and rest of architectures I guess) it's compiled as module.
Can you please include this module?
-- Package-specific info:
** Version:
Linux version 2.6.32-5-kirkwood (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Tue Mar 8 10:56:14 UTC 2011
** Command line:
console=ttyS0,115200 root=/dev/sda1 rootdelay=25 rootfstype=ext2 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
** Not tainted
** Kernel log:
[ 22.116592] io scheduler noop registered
[ 22.116600] io scheduler anticipatory registered
[ 22.116607] io scheduler deadline registered
[ 22.116786] io scheduler cfq registered (default)
[ 22.122785] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 22.123256] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 22.446667] console [ttyS0] enabled
[ 22.450770] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit)
[ 22.459340] Scanning device for bad blocks
[ 22.539386] 4 cmdlinepart partitions found on MTD device orion_nand
[ 22.545695] Creating 4 MTD partitions on "orion_nand":
[ 22.550867] 0x000000000000-0x000000100000 : "u-boot"
[ 22.556429] 0x000000100000-0x000000500000 : "uImage"
[ 22.561901] 0x000000500000-0x000002500000 : "rootfs"
[ 22.567380] 0x000002500000-0x000010000000 : "data"
[ 22.573382] mice: PS/2 mouse device common for all mice
[ 23.580491] rtc-mv rtc-mv: internal RTC not ticking
[ 23.585481] i2c /dev entries driver
[ 23.589155] cpuidle: using governor ladder
[ 23.593401] cpuidle: using governor menu
[ 23.597434] Registered led device: plug:green:health
[ 23.602501] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[ 23.608900] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[ 23.650517] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 23.690516] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[ 23.730517] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[ 23.770516] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[ 23.777184] TCP cubic registered
[ 23.780426] NET: Registered protocol family 17
[ 23.784922] Gating clock of unused units
[ 23.784930] before: 0x00dfc3fd
[ 23.784937] after: 0x00c701d9
[ 23.785248] registered taskstats version 1
[ 23.790021] /build/buildd-linux-2.6_2.6.32-31-armel-ReZWr3/linux-2.6-2.6.32/debian/build/source_armel_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 23.804634] Initalizing network drop monitor service
[ 23.809678] Freeing init memory: 124K
[ 23.890918] udev[44]: starting version 164
[ 24.160549] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 24.166951] mv643xx_eth smi: probed
[ 24.239777] net eth0: port 0 with MAC address 00:10:75:1a:dc:56
[ 24.253245] usbcore: registered new interface driver usbfs
[ 24.260352] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
[ 24.270790] usbcore: registered new interface driver hub
[ 24.281691] usbcore: registered new device driver usb
[ 24.304413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 24.311089] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 24.316399] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 24.350512] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 24.370492] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 24.376493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 24.383333] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 24.390606] usb usb1: Product: Marvell Orion EHCI
[ 24.395333] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd
[ 24.401725] usb usb1: SerialNumber: orion-ehci.0
[ 24.407260] usb usb1: configuration #1 chosen from 1 choice
[ 24.413203] hub 1-0:1.0: USB hub found
[ 24.417005] hub 1-0:1.0: 1 port detected
[ 24.740498] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 24.891902] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 24.898635] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 24.905815] usb 1-1: Product: USB2.0 Hub
[ 24.911193] usb 1-1: configuration #1 chosen from 1 choice
[ 24.920098] hub 1-1:1.0: USB hub found
[ 24.924283] hub 1-1:1.0: 4 ports detected
[ 25.200814] usb 1-1.4: new high speed USB device using orion-ehci and address 3
[ 25.311397] usb 1-1.4: New USB device found, idVendor=0204, idProduct=6025
[ 25.318303] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 25.325662] usb 1-1.4: Product: Flash Disk
[ 25.330300] usb 1-1.4: Manufacturer:
[ 25.334717] usb 1-1.4: SerialNumber: 170842006E66BF01
[ 25.341173] usb 1-1.4: configuration #1 chosen from 1 choice
[ 25.432179] SCSI subsystem initialized
[ 25.459355] Initializing USB Mass Storage driver...
[ 25.464577] scsi0 : SCSI emulation for USB Mass Storage devices
[ 25.471278] usbcore: registered new interface driver usb-storage
[ 25.477910] usb-storage: device found at 3
[ 25.477919] usb-storage: waiting for device to settle before scanning
[ 25.477953] USB Mass Storage support registered.
[ 30.470792] usb-storage: device scan complete
[ 30.471370] scsi 0:0:0:0: Direct-Access Flash Disk 5.00 PQ: 0 ANSI: 2
[ 30.508684] sd 0:0:0:0: [sda] 4091904 512-byte logical blocks: (2.09 GB/1.95 GiB)
[ 30.516670] sd 0:0:0:0: [sda] Write Protect is off
[ 30.521505] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
[ 30.521515] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 30.529541] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 30.535694] sda: sda1 sda2
[ 30.542169] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 30.548297] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 50.112727] udev[165]: starting version 164
[ 58.765634] NET: Registered protocol family 10
[ 58.777682] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 58.969780] fuse init (API version 7.13)
[ 60.292345] eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 60.299087] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 62.026628] device eth0 entered promiscuous mode
[ 70.900493] eth0: no IPv6 routers present
[ 200.595281] Adding 141040k swap on /dev/sda2. Priority:-1 extents:1 across:141040k
[ 308.375408] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 333.357134] NET: Registered protocol family 8
[ 333.361554] NET: Registered protocol family 20
** Model information
Processor : Feroceon 88FR131 rev 1 (v5l)
Hardware : Marvell SheevaPlug Reference Board
Revision : 0000
** Loaded modules:
Module Size Used by
atm 35020 0
iptable_filter 2012 0
ip_tables 9004 1 iptable_filter
x_tables 10753 1 ip_tables
fuse 51372 1
ipv6 253910 16
hmac 2475 0
sha1_generic 1717 0
mv_cesa 9270 0
aes_generic 32820 1 mv_cesa
ext2 55323 1
mbcache 4860 1 ext2
sd_mod 31324 3
crc_t10dif 1106 1 sd_mod
usb_storage 35171 2
scsi_mod 119260 2 sd_mod,usb_storage
ehci_hcd 36469 0
mvsdio 5318 0
usbcore 122487 3 usb_storage,ehci_hcd
mmc_core 50206 1 mvsdio
mv643xx_eth 22562 0
nls_base 5367 1 usbcore
libphy 14836 1 mv643xx_eth
inet_lro 5060 1 mv643xx_eth
** PCI devices:
** Sound cards:
-- System Information:
Debian Release: 6.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: armel (armv5tel)
Kernel: Linux 2.6.32-5-kirkwood
Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-kirkwood depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-34squeeze1 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-kirkwood recommends:
ii firmware-linux-free 2.6.32-34squeeze1 Binary firmware for various driver
ii uboot-mkimage 0.4 generate kernel image for U-Boot
Versions of packages linux-image-2.6.32-5-kirkwood suggests:
pn fdutils <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-kirkwood is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-kirkwood/postinst/missing-firmware-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/postinst/depmod-error-initrd-2.6.32-5-kirkwood: false
linux-image-2.6.32-5-kirkwood/postinst/ignoring-do-bootloader-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/prerm/removing-running-kernel-2.6.32-5-kirkwood: true
Reply to: