Bug#630845: linux-image-2.6.39-2-powerpc: CHRP Pegasos2 boot failure
Package: linux-2.6
Version: 2.6.39-2
Severity: normal
Binary packages that have failed to boot on my Pegasos2 are
linux-image-2.6.39-2-powerpc_2.6.39-2,
linux-image-2.6.39-1-powerpc_2.6.39-1 and
linux-image-2.6.38-2-powerpc_2.6.38-5.
There is nothing interesting on the screen. After loading from firmware
they just stick at one of the characters of a BSD style spinner.
I am running 2.6.32-5-powerpc so this was used to report bug.
As a result I am not able to confirm if bug 627585 has been fixed.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
revision : 1.1 (pvr 8002 0101)
platform : CHRP
model : Pegasos2
machine : CHRP Pegasos2
** PCI devices:
0000:00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller [11ab:6460] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 0
0000:00:01.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (8000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 80002000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at 1080 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0000:00:06.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 8 (250ns min, 10500ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0000:00:06.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 8 (250ns min, 10500ns max)
Interrupt: pin B routed to IRQ 9
Region 0: Memory at 80001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0000:00:06.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: Device [0ee4:3383]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 68 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 9
Region 0: Memory at 80002800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
0000:00:0c.0 ISA bridge [0601]: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] [1106:8231] (rev 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: parport_pc
0000:00:0c.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin ? routed to IRQ 14
Region 0: [virtual] I/O ports at 1000 [size=8]
Region 1: [virtual] I/O ports at 100c [size=4]
Region 2: [virtual] I/O ports at 1010 [size=8]
Region 3: [virtual] I/O ports at 101c [size=4]
Region 4: I/O ports at 1020 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
0000:00:0c.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1e) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
0000:00:0c.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1e) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
0000:00:0c.4 Bridge [0680]: VIA Technologies, Inc. VT8235 ACPI [1106:8235] (rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
0000:00:0c.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT82C686 AC97 Audio Controller [1106:3058] (rev 40)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at 1100 [size=256]
Region 1: I/O ports at 1030 [size=4]
Region 2: I/O ports at 1034 [size=4]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
0000:00:0c.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 20)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at 1200 [size=256]
Capabilities: <access denied>
0000:00:0d.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 51)
Subsystem: Device [3065:1106]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (63750ns min, 63750ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1300 [size=256]
Region 1: Memory at 80002900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
0001:01:00.0 Host bridge [0600]: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller [11ab:6460] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 0
0001:01:08.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960] (rev 01) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:0054]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (2000ns min)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 1000 [size=256]
Region 2: Memory at c8000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at c8020000 [disabled] [size=128K]
Kernel driver in use: radeonfb
0001:01:08.1 Display controller [0380]: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:0055]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at d0000000 (32-bit, prefetchable) [disabled] [size=128M]
Region 1: Memory at c8010000 (32-bit, non-prefetchable) [disabled] [size=64K]
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:3417 Hewlett-Packard LaserJet 3055
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.32-5-powerpc
Locale: LANG=en_AU, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.39-2-powerpc depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-2-powerpc recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.39-2-powerpc suggests:
ii linux-doc-2.6.39 2.6.39-2 Linux kernel specific documentatio
ii mkvmlinuz 35 create a kernel to boot a PowerPC
Versions of packages linux-image-2.6.39-2-powerpc is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.30 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.39-2-powerpc/postinst/missing-firmware-2.6.39-2-powerpc:
linux-image-2.6.39-2-powerpc/prerm/removing-running-kernel-2.6.39-2-powerpc: true
linux-image-2.6.39-2-powerpc/postinst/ignoring-ramdisk:
linux-image-2.6.39-2-powerpc/postinst/depmod-error-initrd-2.6.39-2-powerpc: false
Reply to: