Bug#630031: linux-image-2.6.39-2-686-pae: Kernel boots, but dmesg contains kernel bug trace
Package: linux-2.6
Version: 2.6.39-2
Severity: important
Tags: sid
Kernel would not boot first thing this morning (June 10) but yesterday it
seemed OK after aptitude upgrade. Now after another upgrade it boots, but there
is a bug trace in logs
-- Package-specific info:
** Version:
Linux version 2.6.39-2-686-pae (Debian 2.6.39-2) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:33:14 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-686-pae root=UUID=e27e5d70-6d89-407c-a7c0-078ae4a0e704 ro quiet
** Tainted: D (128)
* Kernel has oopsed before.
** Kernel log:
[ 5.812855] *pdpt = 0000000001492001 *pde = 00000000019fc067 *pte = 0000000000000000
[ 5.812990] Oops: 0000 [#1] SMP
[ 5.813087] last sysfs file: /sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/PNP0C04:00/uevent
[ 5.813133] Modules linked in: video processor parport thermal_sys button ext3 jbd mbcache usb_storage uas sg sd_mod sr_mod cdrom crc_t10dif ata_generic uhci_hcd ata_piix libata ehci_hcd e100 usbcore scsi_mod mii [last unloaded: scsi_wait_scan]
[ 5.813974]
[ 5.814010] Pid: 275, comm: modprobe Not tainted 2.6.39-2-686-pae #1 /D865GBF
[ 5.814149] EIP: 0000:[<000000c3>] EFLAGS: f7280b04 CPU: 0
[ 5.814188] EIP is at 0xc3
[ 5.814234] EAX: c10f47dc EBX: f716bd3c ECX: 00000000 EDX: f5c29774
[ 5.814285] ESI: 33380000 EDI: 00000002 EBP: 00000002 ESP: f716bd34
[ 5.814335] DS: ab94 ES: 0af8 FS: 0001 GS: 00e0 SS: 0068
[ 5.814386] Process modprobe (pid: 275, ti=f716a000 task=f7055a00 task.ti=f70dc000)
[ 5.814447] Stack:
[ 5.814492] c1413a68 c1413a64 00000282 00000000 f7004780 c102dfbb 00000000 00000000
[ 5.814793] 00000001 00000003 f7048000 00000000 00000282 f7048000 00000000 c122c8ee
[ 5.815093] 00000000 f5c29774 00000001 c115430c 00000000 f716bdcc 00000000 f5c29774
[ 5.815394] Call Trace:
[ 5.815448] [<c102dfbb>] ? __wake_up+0x2c/0x3b
[ 5.815503] [<c122c8ee>] ? netlink_broadcast_filtered+0x22b/0x254
[ 5.815558] [<c115430c>] ? idr_get_empty_slot+0x149/0x217
[ 5.815610] [<c115430c>] ? idr_get_empty_slot+0x149/0x217
[ 5.815663] [<c11586d1>] ? number+0x176/0x279
[ 5.815713] [<c11544ab>] ? ida_get_new_above+0xd1/0x16c
[ 5.815767] [<c101aacb>] ? native_send_call_func_single_ipi+0x1f/0x20
[ 5.815821] [<c105c446>] ? generic_exec_single+0x4d/0x65
[ 5.815874] [<c1026817>] ? leave_mm+0x29/0x29
[ 5.815925] [<c105c5d0>] ? smp_call_function_single+0xd1/0xe2
[ 5.815977] [<c1026817>] ? leave_mm+0x29/0x29
[ 5.816019] [<c1026817>] ? leave_mm+0x29/0x29
[ 5.816019] [<c105c806>] ? smp_call_function+0x17/0x1b
[ 5.816019] [<c105c817>] ? on_each_cpu+0xd/0x30
[ 5.816019] [<c10b62ab>] ? __purge_vmap_area_lazy+0xf6/0x13c
[ 5.816019] [<c10b730b>] ? vm_unmap_aliases+0x121/0x12a
[ 5.816019] [<f8219000>] ? 0xf8218fff
[ 5.816019] [<c10241a4>] ? change_page_attr_set_clr+0xfc/0x338
[ 5.816019] [<c1050447>] ? down_timeout+0x36/0x3d
[ 5.816019] [<c12b122a>] ? mutex_lock+0xb/0x24
[ 5.816019] [<c12b122a>] ? mutex_lock+0xb/0x24
[ 5.816019] [<c12b50c7>] ? kprobes_module_callback+0xf5/0x109
[ 5.816019] [<c11ac989>] ? acpi_ut_release_read_lock+0x40/0x45
[ 5.816019] [<c1051815>] ? lowest_in_progress+0x5d/0x66
[ 5.816019] [<c10245f0>] ? change_page_attr_set+0x22/0x26
[ 5.816019] [<c1024607>] ? set_memory_rw+0x13/0x17
[ 5.816019] [<f8219000>] ? 0xf8218fff
[ 5.816019] [<c1060cbd>] ? sys_init_module+0xdca/0xe7d
[ 5.816019] [<c12b715f>] ? sysenter_do_call+0x12/0x28
[ 5.816019] Code: Bad EIP value.
[ 5.816019] EIP: [<0000099c>] 0x99c SS:ESP 0068:f716bd34
[ 5.816019] CR2: 00000000ffffff82
[ 5.816019] ---[ end trace 935545f4eeaa95f8 ]---
[ 5.858310] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 5.865901] parport_pc 00:08: reported by Plug and Play ACPI
[ 5.866024] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.003864] Intel 82802 RNG detected
[ 6.081093] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.143776] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.145569] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.185053] [drm] Initialized drm 1.1.0 20060810
[ 6.362132] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.362281] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 6.788072] intel8x0_measure_ac97_clock: measured 55917 usecs (2694 samples)
[ 6.788128] intel8x0: clocking to 48000
[ 6.789405] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.789477] i915 0000:00:02.0: setting latency timer to 64
[ 6.808770] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.808859] [drm] Driver supports precise vblank timestamp query.
[ 6.822560] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.823052] [drm] initialized overlay support
[ 6.954439] fbcon: inteldrmfb (fb0) is primary device
[ 7.025798] Console: switching to colour frame buffer device 210x65
[ 7.033765] fb0: inteldrmfb frame buffer device
[ 7.033807] drm: registered panic notifier
[ 7.034224] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 7.034742] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.185282] Adding 196996k swap on /dev/sda1. Priority:-1 extents:1 across:196996k
[ 9.755009] EXT3-fs (sda2): using internal journal
[ 9.899473] loop: module loaded
[ 11.372843] EXT3-fs: barriers not enabled
[ 11.373177] kjournald starting. Commit interval 5 seconds
[ 11.373493] EXT3-fs (sda3): using internal journal
[ 11.373545] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 11.528611] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 11.574945] EXT3-fs: barriers not enabled
[ 11.584795] kjournald starting. Commit interval 5 seconds
[ 11.585250] EXT3-fs (sda5): using internal journal
[ 11.585295] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 12.412198] RPC: Registered udp transport module.
[ 12.415692] RPC: Registered tcp transport module.
[ 12.419074] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.479070] FS-Cache: Loaded
[ 12.539800] FS-Cache: Netfs 'nfs' registered for caching
[ 12.567740] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.913143] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.916654] e100 0000:01:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 12.920365] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.472995] fuse init (API version 7.16)
[ 13.705376] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e
[ 13.770117] microcode: CPU1 sig=0xf29, pf=0x4, revision=0x2e
[ 13.784932] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 23.104065] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
microcode 13231 0
fuse 55666 1
nfsd 196206 2
nfs 219235 0
lockd 60891 2 nfsd,nfs
fscache 31438 1 nfs
auth_rpcgss 31819 2 nfsd,nfs
nfs_acl 12463 2 nfsd,nfs
sunrpc 137017 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
nls_utf8 12416 1
nls_cp437 12417 1
vfat 16989 1
fat 44149 1 vfat
lm85 17907 0
hwmon_vid 12364 1 lm85
loop 17777 0
i915 286502 2
snd_intel8x0 22287 0
snd_ac97_codec 83732 1 snd_intel8x0
ac97_bus 12462 1 snd_ac97_codec
drm_kms_helper 26550 1 i915
snd_pcm 52731 2 snd_intel8x0,snd_ac97_codec
snd_seq 39172 0
snd_timer 22171 2 snd_pcm,snd_seq
snd_seq_device 12995 1 snd_seq
psmouse 45863 0
snd 38189 6 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
drm 129190 3 i915,drm_kms_helper
shpchp 26653 0
i2c_i801 12670 0
i2c_algo_bit 12706 1 i915
soundcore 12878 1 snd
snd_page_alloc 12841 2 snd_intel8x0,snd_pcm
pci_hotplug 26303 1 shpchp
evdev 13084 7
i2c_core 19022 6 lm85,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
intel_rng 12501 0
rng_core 12550 1 intel_rng
parport_pc 21895 0
pcspkr 12515 0
serio_raw 12758 0
video 17345 1 i915
processor 26983 0
parport 27018 1 parport_pc
thermal_sys 17667 3 video,processor,processor
button 12783 1 i915
ext3 102125 3
jbd 40818 1 ext3
mbcache 12810 1 ext3
usb_storage 34951 1
uas 12975 0
sg 21385 0
sd_mod 35060 7
sr_mod 17418 0
cdrom 34631 1 sr_mod
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
uhci_hcd 21850 0
ata_piix 21079 4
libata 132100 2 ata_generic,ata_piix
ehci_hcd 34885 0
e100 31318 0
usbcore 99225 5 usb_storage,uas,uhci_hcd,ehci_hcd
scsi_mod 134453 6 usb_storage,uas,sg,sr_mod,sd_mod,libata
mii 12595 1 e100
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:f1:90:91:ef brd ff:ff:ff:ff:ff:ff
inet 192.168.0.105/24 brd 192.168.0.255 scope global eth0
inet6 fe80::20c:f1ff:fe90:91ef/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 708 13 0 0 0 0 0 0 708 13 0 0 0 0 0 0
eth0: 87951 139 0 0 0 0 0 0 18430 175 0 0 0 0 0 0
*** Protocol statistics:
Ip:
156 total packets received
0 forwarded
0 incoming packets discarded
155 incoming packets delivered
153 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
7 active connections openings
2 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
84 segments received
85 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
66 packets received
0 packets to unknown port received.
0 packet receive errors
64 packets sent
UdpLite:
TcpExt:
3 TCP sockets finished time wait in fast timer
1 delayed acks sent
43 packet headers predicted
15 acknowledgments not containing data payload received
IpExt:
InMcastPkts: 21
OutMcastPkts: 21
InBcastPkts: 3
InOctets: 89314
OutOctets: 12108
InMcastOctets: 3347
OutMcastOctets: 3371
InBcastOctets: 891
*** Device features:
eth0: 0x4000
lo: 0x201b7c65
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ec00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at cc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff800000-ff8fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at d800 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at c400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:e001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 01)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:302f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ff8ff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at bc00 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
Bus 003 Device 002: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.39-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.39-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-2-686-pae recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-6 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.39-2-686-pae suggests:
ii grub-pc 1.99-6 GRand Unified Bootloader, version
pn linux-doc-2.6.39 <none> (no description available)
Versions of packages linux-image-2.6.39-2-686-pae is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.30 Binary firmware for various driver
ii firmware-linux-nonfree 0.30 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.39-2-686-pae/postinst/depmod-error-initrd-2.6.39-2-686-pae: false
linux-image-2.6.39-2-686-pae/prerm/removing-running-kernel-2.6.39-2-686-pae: true
linux-image-2.6.39-2-686-pae/postinst/ignoring-ramdisk:
linux-image-2.6.39-2-686-pae/postinst/missing-firmware-2.6.39-2-686-pae:
Reply to: