Your message dated Wed, 08 Jun 2011 14:47:37 +0100 with message-id <1307540857.22348.499.camel@localhost> and subject line Re: Bug#629634: linux-image-2.6.38-2-amd64: Broken bridge IPv6 forwarding has caused the Debian Bug report #629634, regarding linux-image-2.6.38-2-amd64: Broken bridge IPv6 forwarding to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 629634: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=629634 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.38-2-amd64: Broken bridge IPv6 forwarding
- From: Meinhard Schneider <meini@meini.org>
- Date: Wed, 08 Jun 2011 11:57:08 +0200
- Message-id: <[🔎] 20110608095708.7727.71968.reportbug@dingo.innofinity.de>
Package: linux-2.6 Version: 2.6.38-5 Severity: important Bridge IPv6 forwarding is broken in 2.6.38: http://www.spinics.net/lists/linux-ethernet-bridging/msg04084.html Please apply the mentioned patch. -- Package-specific info: ** Version: Linux version 2.6.38-2-amd64 (Debian 2.6.38-5) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 13:51:57 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=acb70178-aad0-49ea-911b-727ab468e3ae ro console=tty0 console=ttyS0,115200n8 vga=0x318 ** Not tainted ** Kernel log: [ 0.920388] usbcore: registered new interface driver hub [ 0.924076] 8139cp 0000:00:06.0: eth0: RTL-8139C+ at 0xffffc9000018e000, 52:54:00:31:ba:d8, IRQ 10 [ 0.928557] 8139cp 0000:00:06.0: setting latency timer to 64 [ 0.938644] usbcore: registered new device driver usb [ 0.945704] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.948948] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11 [ 0.964284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.974606] libata version 3.00 loaded. [ 0.979177] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 0.990729] uhci_hcd: USB Universal Host Controller Interface driver [ 0.996312] virtio-pci 0000:00:04.0: setting latency timer to 64 [ 0.996416] ata_piix 0000:00:01.1: version 2.13 [ 0.997707] ata_piix 0000:00:01.1: setting latency timer to 64 [ 0.998248] scsi0 : ata_piix [ 1.002751] scsi1 : ata_piix [ 1.006469] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14 [ 1.019180] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15 [ 1.021812] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 1.028147] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10 [ 1.031703] virtio-pci 0000:00:05.0: setting latency timer to 64 [ 1.031795] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11 [ 1.035410] uhci_hcd 0000:00:01.2: setting latency timer to 64 [ 1.035419] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 1.048199] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 1.050884] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020 [ 1.059780] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.066041] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.068729] usb usb1: Product: UHCI Host Controller [ 1.070911] usb usb1: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd [ 1.073168] usb usb1: SerialNumber: 0000:00:01.2 [ 1.077663] hub 1-0:1.0: USB hub found [ 1.089476] hub 1-0:1.0: 2 ports detected [ 1.140361] virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X [ 1.140390] virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X [ 1.174360] vda: vda1 vda2 vda3 [ 1.204358] ata2.01: NODEV after polling detection [ 1.204687] ata2.00: ATAPI: QEMU DVD-ROM, 0.14.0, max UDMA/100 [ 1.208975] ata2.00: configured for MWDMA2 [ 1.212877] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.14 PQ: 0 ANSI: 5 [ 1.259400] virtio-pci 0000:00:05.0: irq 42 for MSI/MSI-X [ 1.259422] virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X [ 1.259442] virtio-pci 0000:00:05.0: irq 44 for MSI/MSI-X [ 1.265225] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray [ 1.267975] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.271308] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.301067] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 1.404044] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 1.420038] Refined TSC clocksource calibration: 3000.210 MHz. [ 1.664781] PM: Starting manual resume from disk [ 1.667671] PM: Hibernation image partition 254:1 present [ 1.667673] PM: Looking for hibernation image. [ 1.667754] PM: Image not found (code -22) [ 1.667756] PM: Hibernation image not present or could not be loaded. [ 1.694561] EXT3-fs: barriers not enabled [ 1.698024] kjournald starting. Commit interval 5 seconds [ 1.700231] EXT3-fs (vda2): mounted filesystem with ordered data mode [ 1.705459] usb 1-1: New USB device found, idVendor=0627, idProduct=0001 [ 1.707886] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5 [ 1.710404] usb 1-1: Product: QEMU USB Tablet [ 1.712431] usb 1-1: Manufacturer: QEMU 0.14.0 [ 1.714261] usb 1-1: SerialNumber: 42 [ 1.780803] input: QEMU 0.14.0 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input1 [ 1.784696] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.14.0 QEMU USB Tablet] on usb-0000:00:01.2-1/input0 [ 1.797727] usbcore: registered new interface driver usbhid [ 1.808034] usbhid: USB HID core driver [ 2.623711] <30>udev[240]: starting version 167 [ 2.884574] WARNING! power/level is deprecated; use power/control instead [ 2.989243] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 3.016388] <30>udev[263]: renamed network interface eth0 to eth0-eth1 [ 3.027011] <30>udev[258]: renamed network interface eth1 to eth0 [ 3.069482] <30>udev[263]: renamed network interface eth0-eth1 to eth1 [ 3.097013] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.099826] ACPI: Power Button [PWRF] [ 3.124131] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 3.199304] ACPI: acpi_idle registered with cpuidle [ 3.348054] Error: Driver 'pcspkr' is already registered, aborting... [ 3.526529] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 3.912088] Adding 3903756k swap on /dev/vda1. Priority:-1 extents:1 across:3903756k [ 4.277242] EXT3-fs (vda2): using internal journal [ 4.463407] loop: module loaded [ 5.010592] EXT3-fs: barriers not enabled [ 5.013499] kjournald starting. Commit interval 5 seconds [ 5.035973] EXT3-fs (vda3): using internal journal [ 5.039915] EXT3-fs (vda3): mounted filesystem with ordered data mode [ 6.014476] RPC: Registered udp transport module. [ 6.014479] RPC: Registered tcp transport module. [ 6.014480] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.060244] FS-Cache: Loaded [ 6.104551] FS-Cache: Netfs 'nfs' registered for caching [ 6.133309] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.520260] eth1: link up, 100Mbps, full-duplex, lpa 0x05E1 [ 14.317396] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.020441] sshd (1422): /proc/1422/oom_adj is deprecated, please use /proc/1422/oom_score_adj instead. [ 16.880019] eth1: no IPv6 routers present [ 17.008019] eth0: no IPv6 routers present [353791.492041] TCP: Peer 0000:0000:0000:0000:0000:ffff:5df5:3d73:49782/80 unexpectedly shrunk window 3915748651:3915758815 (repaired) [358707.744032] TCP: Peer 0000:0000:0000:0000:0000:ffff:5b25:4556:49460/80 unexpectedly shrunk window 3700604559:3700643117 (repaired) [363823.812021] TCP: Peer 0000:0000:0000:0000:0000:ffff:5b25:431b:3682/80 unexpectedly shrunk window 2318787936:2318802261 (repaired) [448598.644052] TCP: Peer 0000:0000:0000:0000:0000:ffff:4fe7:1d69:51177/80 unexpectedly shrunk window 223122994:223136062 (repaired) [448599.172028] TCP: Peer 0000:0000:0000:0000:0000:ffff:4fe7:1d69:51177/80 unexpectedly shrunk window 223122994:223136062 (repaired) ** Model information sys_vendor: Bochs product_name: Bochs product_version: chassis_vendor: Bochs chassis_version: bios_vendor: Bochs bios_version: Bochs ** Loaded modules: Module Size Used by xt_multiport 12518 1 iptable_filter 12536 1 ip_tables 21818 1 iptable_filter x_tables 18839 3 xt_multiport,iptable_filter,ip_tables nfsd 258504 2 exportfs 12591 1 nfsd nfs 250037 0 lockd 70844 2 nfsd,nfs fscache 36071 1 nfs nfs_acl 12511 2 nfsd,nfs auth_rpcgss 36692 2 nfsd,nfs sunrpc 162075 9 nfsd,nfs,lockd,nfs_acl,auth_rpcgss loop 22515 0 snd_pcm 67327 0 snd_timer 22658 1 snd_pcm snd 52280 2 snd_pcm,snd_timer tpm_tis 13125 0 processor 27431 0 soundcore 13014 1 snd tpm 17756 1 tpm_tis tpm_bios 12903 1 tpm snd_page_alloc 12969 1 snd_pcm i2c_piix4 12536 0 evdev 17475 2 button 12994 0 psmouse 55199 0 thermal_sys 17939 1 processor joydev 17138 0 i2c_core 23725 1 i2c_piix4 virtio_balloon 12775 0 pcspkr 12579 0 serio_raw 12878 0 usbhid 39900 0 hid 72616 1 usbhid ext3 112218 2 jbd 41698 1 ext3 mbcache 12930 1 ext3 sg 25769 0 sr_mod 21824 0 virtio_net 17496 0 cdrom 35134 1 sr_mod ata_generic 12479 0 virtio_blk 12775 4 uhci_hcd 26290 0 ata_piix 25319 0 8139too 26385 0 ehci_hcd 39529 0 libata 147240 2 ata_generic,ata_piix usbcore 122908 4 usbhid,uhci_hcd,ehci_hcd floppy 56861 0 scsi_mod 161457 3 sg,sr_mod,libata virtio_pci 13207 0 8139cp 22417 0 virtio_ring 12793 4 virtio_balloon,virtio_net,virtio_blk,virtio_pci nls_base 12753 1 usbcore virtio 13093 4 virtio_balloon,virtio_net,virtio_blk,virtio_pci mii 12634 2 8139too,8139cp ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] (prog-if 80 [Master]) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at c000 [size=16] Kernel driver in use: ata_piix 00:01.2 USB Controller [0c03]: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] [8086:7020] (rev 01) (prog-if 00 [UHCI]) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at c020 [size=32] Kernel driver in use: uhci_hcd 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 9 Kernel driver in use: piix4_smbus 00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc Device [1af4:1100] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at f0000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at f2000000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at f2010000 [disabled] [size=64K] 00:03.0 RAM memory [0500]: Red Hat, Inc Virtio memory balloon [1af4:1002] Subsystem: Red Hat, Inc Device [1af4:0005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c040 [size=32] Kernel driver in use: virtio-pci 00:04.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device [1af4:1001] Subsystem: Red Hat, Inc Device [1af4:0002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c080 [size=64] Region 1: Memory at f2020000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: virtio-pci 00:05.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000] Subsystem: Red Hat, Inc Device [1af4:0001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at c0c0 [size=32] Region 1: Memory at f2021000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at f2030000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: virtio-pci 00:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 20) Subsystem: Red Hat, Inc Device [1af4:1100] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at c100 [size=256] Region 1: Memory at f2040000 (32-bit, non-prefetchable) [size=256] Expansion ROM at f2050000 [disabled] [size=64K] Kernel driver in use: 8139cp ** USB devices: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-2-amd64 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.38-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs ii linux-base 3.2 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.38-2-amd64 recommends: ii firmware-linux-free 3 Binary firmware for various driver Versions of packages linux-image-2.6.38-2-amd64 suggests: ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version pn linux-doc-2.6.38 <none> (no description available) Versions of packages linux-image-2.6.38-2-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64: linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64: linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
--- End Message ---
--- Begin Message ---
- To: 629634-done@bugs.debian.org
- Subject: Re: Bug#629634: linux-image-2.6.38-2-amd64: Broken bridge IPv6 forwarding
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Wed, 08 Jun 2011 14:47:37 +0100
- Message-id: <1307540857.22348.499.camel@localhost>
- In-reply-to: <[🔎] 20110608095708.7727.71968.reportbug@dingo.innofinity.de>
- References: <[🔎] 20110608095708.7727.71968.reportbug@dingo.innofinity.de>
Version: 2.6.39-1 On Wed, 2011-06-08 at 11:57 +0200, Meinhard Schneider wrote: > Package: linux-2.6 > Version: 2.6.38-5 > Severity: important > > Bridge IPv6 forwarding is broken in 2.6.38: > http://www.spinics.net/lists/linux-ethernet-bridging/msg04084.html > > Please apply the mentioned patch. [...] No, upgrade to 2.6.39-1 (unstable) or -2 (uploaded today). Ben. -- Ben Hutchings Lowery's Law: If it jams, force it. If it breaks, it needed replacing anyway.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---