Bug#629401: linux-image-2.6.39-1-amd64: Enable CONFIG_IP_SET
Package: linux-2.6
Version: 2.6.39-1+b1
Severity: wishlist
Hi!
Please include CONFIG_IP_SET. This allows use of sets of IP with
Netfilter. Those sets can be modified on the fly with "ipset" (whose
correct version is not yet packaged in Debian).
-- Package-specific info:
** Version:
Linux version 2.6.39-1-amd64 (Debian 2.6.39-1) (buildd_amd64-brahms@buildd.debian.org) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Tue May 24 14:34:19 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.39-1-amd64 root=/dev/mapper/naruto-root ro quiet splash
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 4.792165] generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.7-1.4.1/input0
[ 4.864132] usb 1-1.4.2: new full speed USB device number 6 using ehci_hcd
[ 4.958758] usb 1-1.4.2: New USB device found, idVendor=0a5c, idProduct=4503
[ 4.958761] usb 1-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.961418] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.0/input/input5
[ 4.961472] generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.7-1.4.2/input0
[ 5.032135] usb 1-1.4.3: new full speed USB device number 7 using ehci_hcd
[ 5.127503] usb 1-1.4.3: New USB device found, idVendor=0a5c, idProduct=2148
[ 5.127507] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.127509] usb 1-1.4.3: Product: BCM92046DG-CL1ROM
[ 5.127511] usb 1-1.4.3: Manufacturer: Broadcom Corp
[ 5.127513] usb 1-1.4.3: SerialNumber: 000272A8445E
[ 5.671740] udevd[321]: starting version 170
[ 6.116519] wmi: Mapper loaded
[ 6.122370] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.150273] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.208632] ACPI: acpi_idle registered with cpuidle
[ 6.213186] Monitor-Mwait will be used to enter C-1 state
[ 6.215367] parport_pc 00:06: reported by Plug and Play ACPI
[ 6.215420] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 6.228771] input: Dell WMI hotkeys as /devices/virtual/input/input6
[ 6.726304] Bluetooth: Core ver 2.16
[ 6.726322] NET: Registered protocol family 31
[ 6.726323] Bluetooth: HCI device and connection manager initialized
[ 6.726325] Bluetooth: HCI socket layer initialized
[ 6.726327] Bluetooth: L2CAP socket layer initialized
[ 6.726362] Bluetooth: SCO socket layer initialized
[ 6.757542] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.757686] usbcore: registered new interface driver btusb
[ 6.788582] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.788625] HDA Intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 6.788647] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.345492] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 8.164013] CE: hpet4 increased min_delta_ns to 7500 nsec
[ 8.164019] CE: hpet4 increased min_delta_ns to 11250 nsec
[ 8.488911] EXT3-fs (dm-0): using internal journal
[ 8.618898] loop: module loaded
[ 9.503199] Adding 511996k swap on /dev/mapper/naruto-swap_1. Priority:-1 extents:1 across:511996k
[ 12.044003] CE: hpet2 increased min_delta_ns to 7500 nsec
[ 12.044011] CE: hpet2 increased min_delta_ns to 11250 nsec
[ 12.044014] hrtimer: interrupt took 5350 ns
[ 12.404005] CE: hpet3 increased min_delta_ns to 7500 nsec
[ 12.404011] CE: hpet3 increased min_delta_ns to 11250 nsec
[ 12.415423] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 12.420030] EXT3-fs: barriers not enabled
[ 12.421921] kjournald starting. Commit interval 5 seconds
[ 12.422483] EXT3-fs (dm-4): using internal journal
[ 12.422487] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 12.450120] EXT3-fs: barriers not enabled
[ 12.457774] kjournald starting. Commit interval 5 seconds
[ 12.457971] EXT3-fs (dm-2): using internal journal
[ 12.457975] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 12.483022] EXT3-fs: barriers not enabled
[ 12.490909] kjournald starting. Commit interval 5 seconds
[ 12.491121] EXT3-fs (dm-3): using internal journal
[ 12.491125] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 12.503416] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[ 12.538334] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 12.668878] EXT3-fs: barriers not enabled
[ 12.669037] kjournald starting. Commit interval 5 seconds
[ 12.669209] EXT3-fs (sda5): using internal journal
[ 12.669213] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 15.541556] Bridge firewalling registered
[ 15.587790] device eth0 entered promiscuous mode
[ 15.652526] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.654966] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 15.656270] e100 0000:03:00.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 15.656791] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.656978] br0: port 1(eth0) entering forwarding state
[ 15.656981] br0: port 1(eth0) entering forwarding state
[ 15.657384] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 16.131719] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.392215] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 17.448044] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 17.448564] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.613161] fuse init (API version 7.16)
[ 18.507072] Disabling lock debugging due to kernel taint
[ 18.527283] vboxdrv: Found 4 processor cores.
[ 18.527525] vboxdrv: fAsync=0 offMin=0x3f0 offMax=0x50a8
[ 18.528093] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 18.528095] vboxdrv: Successfully loaded version 4.0.8_Debian (interface 0x00180000).
[ 18.577793] vboxnet0: Features changed: 0x00004800 -> 0x00004000
[ 19.596856] e1000e: eth1 NIC Link is Up 10 Mbps Half Duplex, Flow Control: None
[ 19.596912] e1000e 0000:00:19.0: eth1: Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.
[ 19.596914] e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[ 19.597363] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 21.827637] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.827639] Bluetooth: BNEP filters: protocol multicast
[ 21.867546] Bluetooth: RFCOMM TTY layer initialized
[ 21.867549] Bluetooth: RFCOMM socket layer initialized
[ 21.867551] Bluetooth: RFCOMM ver 1.11
[ 23.251763] lp0: using parport0 (interrupt-driven).
[ 23.280701] ppdev: user-space parallel port driver
[ 29.656009] eth1: no IPv6 routers present
[ 39.747896] EXT4-fs (dm-5): re-mounted. Opts: commit=0
[ 41.206638] EXT4-fs (dm-7): re-mounted. Opts: commit=0
[ 41.208213] EXT4-fs (dm-6): re-mounted. Opts: commit=0
[ 65.440003] CE: hpet5 increased min_delta_ns to 7500 nsec
[ 65.440010] CE: hpet5 increased min_delta_ns to 11250 nsec
[ 6782.367765] Netfilter messages via NETLINK v0.30.
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 780
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A01
board_vendor: Dell Inc.
board_name: 0C27VV
board_version: A00
** Loaded modules:
Module Size Used by
nfnetlink 12906 0
mperf 12411 0
cpufreq_userspace 12576 0
cpufreq_conservative 13147 0
cpufreq_powersave 12454 0
cpufreq_stats 12713 0
ppdev 12725 0
lp 17190 0
cn 12933 1
rfcomm 32744 8
bnep 17424 2
snd_hrtimer 12604 1
vboxnetadp 13185 0
vboxnetflt 24179 0
vboxdrv 178736 2 vboxnetadp,vboxnetflt
fuse 61554 1
xt_tcpudp 12527 4
iptable_filter 12536 1
xt_NFQUEUE 12544 4
ip_tables 21818 1 iptable_filter
x_tables 18886 4 xt_tcpudp,iptable_filter,xt_NFQUEUE,ip_tables
bridge 65573 0
stp 12392 1 bridge
ext4 317207 3
jbd2 65105 1 ext4
coretemp 12784 0
r8169 37356 0
loop 22479 0
kvm_intel 49912 0
kvm 263518 1 kvm_intel
snd_hda_codec_analog 77600 1
snd_hda_intel 25946 0
snd_hda_codec 67865 2 snd_hda_codec_analog,snd_hda_intel
btusb 17417 1
bluetooth 107224 23 rfcomm,bnep,btusb
snd_hwdep 13148 1 snd_hda_codec
snd_pcm 67276 2 snd_hda_intel,snd_hda_codec
psmouse 55199 0
snd_seq 44678 1
rfkill 19014 3 bluetooth
snd_timer 22658 3 snd_hrtimer,snd_pcm,snd_seq
snd_seq_device 13155 1 snd_seq
snd 52324 9 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 13014 1 snd
serio_raw 12878 0
crc16 12343 2 ext4,bluetooth
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
dell_wmi 12477 0
sparse_keymap 12760 1 dell_wmi
parport_pc 22191 1
processor 27431 0
evdev 17475 7
parport 31650 3 ppdev,lp,parport_pc
i2c_i801 16870 0
dcdbas 13256 0
wmi 13202 1 dell_wmi
ext3 112254 5
jbd 41698 1 ext3
mbcache 12930 2 ext4,ext3
dm_mod 62468 36
usbhid 39946 0
hid 72745 1 usbhid
sg 25769 0
sd_mod 35644 3
sr_mod 21824 0
cdrom 35134 1 sr_mod
crc_t10dif 12348 1 sd_mod
i915 329754 2
e100 32058 0
ahci 25089 2
uhci_hcd 26290 0
libahci 22616 1 ahci
libata 151572 2 ahci,libahci
ehci_hcd 39487 0
scsi_mod 161557 4 sg,sr_mod,sd_mod,libata
mii 12675 2 r8169,e100
drm_kms_helper 26950 1 i915
drm 166500 3 i915,drm_kms_helper
i2c_algo_bit 12834 1 i915
i2c_core 23766 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video 17553 1 i915
usbcore 127203 5 btusb,usbhid,uhci_hcd,ehci_hcd
thermal_sys 17939 2 processor,video
button 12895 1 i915
e1000e 128034 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e10] (rev 03)
Subsystem: Dell Device [1028:0420]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e12] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ec98 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e13] (rev 03)
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network Connection [8086:10de] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at fe6e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe6d9000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ecc0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fe6da000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller [8086:3a6e] (rev 02)
Subsystem: Dell Device [1028:0420]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at fe6dc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe500000-fe5fffff
Prefetchable memory behind bridge: 00000000f0300000-00000000f04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 [8086:3a72] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe400000-fe4fffff
Prefetchable memory behind bridge: 00000000f0100000-00000000f02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe200000-fe3fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface Controller [8086:3a14] (rev 02)
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family) SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 48
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=32]
Region 5: Memory at f0000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller [8086:3a60] (rev 02)
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6db000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
03:00.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 08)
Subsystem: Hewlett-Packard Company NetServer 10/100TX [103c:10cb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe2ff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at dcc0 [size=64]
Region 2: Memory at fe300000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: e100
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 008 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse
Bus 003 Device 002: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard
Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 005: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 001 Device 006: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 001 Device 007: ID 0a5c:2148 Broadcom Corp.
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (101, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.39-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.39-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-1-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.39-1-amd64 suggests:
ii grub-pc 1.99-6 GRand Unified Bootloader, version
pn linux-doc-2.6.39 <none> (no description available)
Versions of packages linux-image-2.6.39-1-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.30 Binary firmware for various driver
ii firmware-linux-nonfree 0.30 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
* linux-image-2.6.39-1-amd64/postinst/missing-firmware-2.6.39-1-amd64:
linux-image-2.6.39-1-amd64/prerm/removing-running-kernel-2.6.39-1-amd64: true
linux-image-2.6.39-1-amd64/postinst/ignoring-ramdisk:
linux-image-2.6.39-1-amd64/postinst/depmod-error-initrd-2.6.39-1-amd64: false
Reply to: