Your message dated Tue, 31 May 2011 10:41:18 +0200 with message-id <20110531084118.GA2742@mraw.org> and subject line Re: Bug#465278: linux-image-2.6.24-1-powerpc: appletouch failure upon resume after suspend2ram has caused the Debian Bug report #465278, regarding linux-image-2.6.24-1-powerpc: appletouch failure upon resume after suspend2ram to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 465278: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=465278 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.24-1-powerpc: appletouch failure upon resume after suspend2ram
- From: Cyril Brulebois <cyril.brulebois@enst-bretagne.fr>
- Date: Mon, 11 Feb 2008 17:17:56 +0100
- Message-id: <20080211161756.8135.42683.reportbug@evy.ikibiki.org>
Package: linux-image-2.6.24-1-powerpc Version: 2.6.24-2 Severity: normal Hi, I've been experiencing troubles with the appletouch driver on my iBook G4 (last series) after resuming from a suspend2ram. With previous kernel versions (all of them being Debian kernels), it was at least possible to modprobe -r and modprobe it back, getting back to a functional driver (even if restarting X was sometimes needed to get back synaptics features, like tapping). Now, it's no longer possible to reload the driver: sudo modprobe -r appletouch | Feb 11 17:04:48 evy kernel: usbcore: deregistering interface driver appletouch sudo modprobe appletouch | Feb 11 17:04:52 evy kernel: drivers/input/mouse/appletouch.c: Could not do mode read request from device (Geyser Raw mode) | Feb 11 17:04:52 evy kernel: appletouch: probe of 1-2:1.0 failed with error -12 | Feb 11 17:04:52 evy kernel: usbcore: registered new interface driver appletouch Cheers, -- Cyril Brulebois -- Package-specific info: ** Version: Linux version 2.6.24-1-powerpc (Debian 2.6.24-2) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 Thu Jan 31 18:52:10 CET 2008 ** Command line: root=/dev/hda4 ro ramdisk_size=8192 ** Not tainted ** Kernel log: adb: finished probe task... agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Loading R300 Microcode eth0: Link is up at 100 Mbps, full-duplex. eth0: Pause is disabled eth0: suspending, WakeOnLan disabled radeonfb (0000:00:10.0): suspending for event: 2... uninorth-agp: disabling AGP on device 0000:00:10.0 uninorth-agp: disabling AGP on bridge 0000:00:0b.0 radeonfb (0000:00:10.0): resuming from state: 2... agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode PCI: Enabling device 0001:10:12.0 (0000 -> 0002) PM: Writing back config space on device 0001:10:12.0 at offset 4 (was 0, writing 80084000) PM: Writing back config space on device 0001:10:12.0 at offset 3 (was 0, writing 1000) PM: Writing back config space on device 0001:10:12.0 at offset 1 (was 2, writing 6) PCI: Enabling device 0001:10:1b.0 (0000 -> 0002) PCI: Enabling device 0001:10:1b.1 (0000 -> 0002) PCI: Enabling device 0001:10:1b.2 (0000 -> 0002) PM: Writing back config space on device 0001:10:1b.2 at offset 1 (was 2100006, writing 2100016) eth0: resuming PHY ID: 4061e4, addr: 0 hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: MWDMA2 mode selected adb: starting probe task... adb devices: [2]: 2 c3 [7]: 7 1f ADB keyboard at 2, handler 1 adb: finished probe task... agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Loading R300 Microcode eth0: Link is up at 100 Mbps, full-duplex. eth0: Pause is disabled eth0: suspending, WakeOnLan disabled radeonfb (0000:00:10.0): suspending for event: 2... uninorth-agp: disabling AGP on device 0000:00:10.0 uninorth-agp: disabling AGP on bridge 0000:00:0b.0 radeonfb (0000:00:10.0): resuming from state: 2... agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode PCI: Enabling device 0001:10:12.0 (0000 -> 0002) PM: Writing back config space on device 0001:10:12.0 at offset 4 (was 0, writing 80084000) PM: Writing back config space on device 0001:10:12.0 at offset 3 (was 0, writing 1000) PM: Writing back config space on device 0001:10:12.0 at offset 1 (was 2, writing 6) PCI: Enabling device 0001:10:1b.0 (0000 -> 0002) PCI: Enabling device 0001:10:1b.1 (0000 -> 0002) PCI: Enabling device 0001:10:1b.2 (0000 -> 0002) PM: Writing back config space on device 0001:10:1b.2 at offset 1 (was 2100006, writing 2100016) eth0: resuming PHY ID: 4061e4, addr: 0 hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: MWDMA2 mode selected adb: starting probe task... adb devices: [2]: 2 c3 [7]: 7 1f ADB keyboard at 2, handler 1 adb: finished probe task... agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Loading R300 Microcode eth0: Link is up at 100 Mbps, full-duplex. eth0: Pause is disabled agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Loading R300 Microcode agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs usbcore: deregistering interface driver appletouch input: appletouch disconnected drivers/input/mouse/appletouch.c: Could not do mode read request from device (Geyser Raw mode) appletouch: probe of 1-2:1.0 failed with error -12 usbcore: registered new interface driver appletouch usbcore: deregistering interface driver appletouch drivers/input/mouse/appletouch.c: Could not do mode read request from device (Geyser Raw mode) appletouch: probe of 1-2:1.0 failed with error -12 usbcore: registered new interface driver appletouch agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Loading R300 Microcode usb 3-1: new low speed USB device using ohci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input7 input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0001:10:1b.1-1 ** Loaded modules: Module Size Used by cpufreq_powersave 1824 1 appletouch 11360 0 radeon 142440 2 drm 90584 3 radeon tun 13376 2 nfs 294856 0 lockd 77752 1 nfs nfs_acl 4032 1 nfs sunrpc 213516 5 nfs,lockd,nfs_acl ipv6 295860 16 dm_snapshot 21184 0 dm_mirror 25728 0 dm_mod 70180 2 dm_snapshot,dm_mirror cpufreq_userspace 4760 0 cpufreq_stats 5956 0 therm_adt746x 13612 0 sr_mod 20644 0 snd_powermac 48416 0 firewire_sbp2 16492 0 scsi_mod 187764 2 sr_mod,firewire_sbp2 snd_aoa_codec_tas 15168 2 snd_aoa_fabric_layout 13864 4 joydev 13696 0 snd_aoa 21056 2 snd_aoa_codec_tas,snd_aoa_fabric_layout arc4 1984 2 ecb 4064 2 blkcipher 8388 1 ecb snd_aoa_i2sbus 24388 1 snd_pcm 92100 3 snd_powermac,snd_aoa_i2sbus snd_timer 26180 2 snd_pcm snd_page_alloc 11912 1 snd_pcm snd 67668 13 snd_powermac,snd_aoa_codec_tas,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_pcm,snd_timer soundcore 8900 1 snd snd_aoa_soundbus 7620 2 snd_aoa_fabric_layout,snd_aoa_i2sbus b43 127328 0 rfkill 9008 1 b43 mac80211 143486 1 b43 cfg80211 16688 1 mac80211 uninorth_agp 11692 1 agpgart 40156 2 drm,uninorth_agp input_polldev 5832 1 b43 evdev 13984 11 ext3 156328 2 jbd 56212 1 ext3 mbcache 9568 1 ext3 sungem 35268 0 sungem_phy 12928 1 sungem firewire_ohci 22464 0 firewire_core 49912 2 firewire_sbp2,firewire_ohci crc_itu_t 2112 1 firewire_core ide_disk 18816 4 ehci_hcd 38892 0 usbhid 49252 0 hid 44036 1 usbhid ff_memless 6184 1 usbhid ide_cd 47108 0 cdrom 42812 2 sr_mod,ide_cd ssb 40132 1 b43 pcmcia 45872 2 b43,ssb pcmcia_core 46904 2 b43,pcmcia firmware_class 11104 2 b43,pcmcia i2c_powermac 5984 0 ** PCI devices: 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes Capabilities: <access denied> 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc M11 NV [FireGL Mobility T2e] [1002:4e56] (rev 80) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc M11 NV [FireGL Mobility T2e] [1002:4e56] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 255 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at 98000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 0400 [size=256] Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at f1000000 [disabled] [size=128K] Capabilities: <access denied> 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes 0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02) Subsystem: Apple Computer Inc. Unknown device [106b:4318] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 Interrupt: pin A routed to IRQ 52 Region 0: Memory at 80084000 (32-bit, non-prefetchable) [size=8K] 0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O [106b:003e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K] 0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 27 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 28 0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (750ns min, 21500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at 80083000 (32-bit, non-prefetchable) [size=4K] 0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 63 Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 63 Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI]) Subsystem: NEC Corporation USB 2.0 [1033:00e0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 63 Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 0002:20:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI [106b:0036] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 16, Cache Line Size: 32 bytes 0002:20:0d.0 Unknown class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100 [106b:003b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 32, Cache Line Size: 32 bytes Interrupt: pin ? routed to IRQ 39 Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K] 0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 FireWire [106b:0031] (rev 81) (prog-if 10 [OHCI]) Subsystem: Apple Computer Inc. iBook G4 2004 [106b:5811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at f5100000 [disabled] [size=1M] -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: powerpc (ppc) Kernel: Linux 2.6.24-1-powerpc Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-powerpc depends on: ii debconf [debconf-2.0] 1.5.17 Debian configuration management sy ii initramfs-tools [linux-initr 0.91c tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo linux-image-2.6.24-1-powerpc recommends no packages. -- debconf information: linux-image-2.6.24-1-powerpc/postinst/bootloader-test-error-2.6.24-1-powerpc: linux-image-2.6.24-1-powerpc/postinst/depmod-error-2.6.24-1-powerpc: false linux-image-2.6.24-1-powerpc/preinst/lilo-initrd-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/prerm/removing-running-kernel-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/preinst/initrd-2.6.24-1-powerpc: linux-image-2.6.24-1-powerpc/preinst/overwriting-modules-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/postinst/old-initrd-link-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/preinst/elilo-initrd-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/preinst/abort-overwrite-2.6.24-1-powerpc: linux-image-2.6.24-1-powerpc/preinst/bootloader-initrd-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/preinst/lilo-has-ramdisk: linux-image-2.6.24-1-powerpc/preinst/abort-install-2.6.24-1-powerpc: shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-1-powerpc/preinst/failed-to-move-modules-2.6.24-1-powerpc: linux-image-2.6.24-1-powerpc/postinst/create-kimage-link-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/postinst/old-dir-initrd-link-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/prerm/would-invalidate-boot-loader-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/postinst/old-system-map-link-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/postinst/depmod-error-initrd-2.6.24-1-powerpc: false linux-image-2.6.24-1-powerpc/postinst/kimage-is-a-directory: linux-image-2.6.24-1-powerpc/postinst/bootloader-error-2.6.24-1-powerpc:
--- End Message ---
--- Begin Message ---
- To: 465278-done@bugs.debian.org
- Subject: Re: Bug#465278: linux-image-2.6.24-1-powerpc: appletouch failure upon resume after suspend2ram
- From: Cyril Brulebois <kibi@debian.org>
- Date: Tue, 31 May 2011 10:41:18 +0200
- Message-id: <20110531084118.GA2742@mraw.org>
- In-reply-to: <20080211161756.8135.42683.reportbug@evy.ikibiki.org>
- References: <20080211161756.8135.42683.reportbug@evy.ikibiki.org>
Version: 2.6.39-1 Sorry for the lack of replies, the mail redirection apparently got killed with no notice… Cyril Brulebois <cyril.brulebois@enst-bretagne.fr> (11/02/2008): > I've been experiencing troubles with the appletouch driver on my > iBook G4 (last series) after resuming from a suspend2ram. With > previous kernel versions (all of them being Debian kernels), it was > at least possible to modprobe -r and modprobe it back, getting back > to a functional driver (even if restarting X was sometimes needed to > get back synaptics features, like tapping). Now, it's no longer > possible to reload the driver: […] After a long while, I powered that machine on again, and it's been working fine for weeks now (except for the xfs bugs in 2.6.39-rc*, now fixed in 2.6.39). Mraw, KiBi.Attachment: signature.asc
Description: Digital signature
--- End Message ---