Your message dated Tue, 31 May 2011 05:38:21 +0100 with message-id <1306816701.4277.114.camel@localhost> and subject line Re: linux-image-2.6.26-1-amd64: r8169 module : ethernet port always down has caused the Debian Bug report #516187, regarding linux-image-2.6.26-1-amd64: r8169 module : ethernet port always down to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 516187: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=516187 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-amd64: r8169 module : ethernet port always down
- From: Olivier Jaulent <ojaulent@gmail.com>
- Date: Thu, 19 Feb 2009 19:03:18 +0100
- Message-id: <20090219180318.8271.13141.reportbug@moya.home>
Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-13 Severity: important Ethernet port never switch to UP. It work under MS-Windows. It work during install but only if I boot MS-Windows before. It do not work anymore under Debian Lenny, even if I reboot first under MS-Windows. My computer is a laptop MSI GX600-073 Extreme Edition. If you need more information, mail me. Kind Regards, Olivier -- Package-specific info: ** Version: Linux version 2.6.26-1-amd64 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC 2009 ** Command line: root=/dev/sda3 ro quiet ** Tainted: P (1) ** Kernel log: [ 4908.771078] eth0: PHY reset until link up [ 4918.828455] eth0: PHY reset until link up [ 4928.877942] eth0: PHY reset until link up [ 4938.924255] eth0: PHY reset until link up [ 4948.960422] eth0: PHY reset until link up [ 4959.011260] eth0: PHY reset until link up [ 4969.056141] eth0: PHY reset until link up [ 4979.105140] eth0: PHY reset until link up [ 4989.146974] eth0: PHY reset until link up [ 4999.189266] eth0: PHY reset until link up [ 5009.335061] eth0: PHY reset until link up [ 5019.436561] eth0: PHY reset until link up [ 5029.521738] eth0: PHY reset until link up [ 5039.653001] eth0: PHY reset until link up [ 5048.749132] wlan0: switched to short barker preamble (BSSID=00:03:c9:8c:c0:c9) [ 5049.783408] eth0: PHY reset until link up [ 5059.898742] eth0: PHY reset until link up [ 5069.951189] eth0: PHY reset until link up [ 5080.000491] eth0: PHY reset until link up [ 5090.065816] eth0: PHY reset until link up [ 5100.103129] eth0: PHY reset until link up [ 5110.151498] eth0: PHY reset until link up [ 5120.182063] eth0: PHY reset until link up [ 5130.217184] eth0: PHY reset until link up [ 5140.295190] eth0: PHY reset until link up [ 5150.361832] eth0: PHY reset until link up [ 5160.410157] eth0: PHY reset until link up [ 5170.458938] eth0: PHY reset until link up [ 5180.499672] eth0: PHY reset until link up [ 5190.542756] eth0: PHY reset until link up [ 5200.589474] eth0: PHY reset until link up [ 5210.647583] eth0: PHY reset until link up [ 5220.693491] eth0: PHY reset until link up [ 5230.754683] eth0: PHY reset until link up [ 5240.821769] eth0: PHY reset until link up [ 5250.905526] eth0: PHY reset until link up [ 5260.988784] eth0: PHY reset until link up [ 5271.050887] eth0: PHY reset until link up [ 5281.117707] eth0: PHY reset until link up [ 5291.170610] eth0: PHY reset until link up [ 5301.288280] eth0: PHY reset until link up [ 5311.381599] eth0: PHY reset until link up [ 5321.460774] eth0: PHY reset until link up [ 5331.557786] eth0: PHY reset until link up [ 5341.670289] eth0: PHY reset until link up [ 5351.774825] eth0: PHY reset until link up [ 5361.874094] eth0: PHY reset until link up [ 5371.985108] eth0: PHY reset until link up [ 5382.056401] eth0: PHY reset until link up [ 5392.137381] eth0: PHY reset until link up [ 5402.190443] eth0: PHY reset until link up [ 5412.245285] eth0: PHY reset until link up [ 5422.328872] eth0: PHY reset until link up [ 5432.402516] eth0: PHY reset until link up [ 5442.483535] eth0: PHY reset until link up [ 5452.546399] eth0: PHY reset until link up [ 5462.639612] eth0: PHY reset until link up [ 5472.719900] eth0: PHY reset until link up [ 5482.797958] eth0: PHY reset until link up [ 5492.896312] eth0: PHY reset until link up [ 5502.973391] eth0: PHY reset until link up [ 5513.044985] eth0: PHY reset until link up [ 5523.135561] eth0: PHY reset until link up [ 5533.199198] eth0: PHY reset until link up [ 5543.287609] eth0: PHY reset until link up [ 5553.371844] eth0: PHY reset until link up [ 5563.484047] eth0: PHY reset until link up [ 5573.600853] eth0: PHY reset until link up [ 5583.666569] eth0: PHY reset until link up [ 5593.744181] eth0: PHY reset until link up [ 5603.851937] eth0: PHY reset until link up [ 5613.911937] eth0: PHY reset until link up [ 5623.992364] eth0: PHY reset until link up [ 5634.121176] eth0: PHY reset until link up [ 5644.227208] eth0: PHY reset until link up [ 5654.355267] eth0: PHY reset until link up [ 5664.476823] eth0: PHY reset until link up [ 5674.579982] eth0: PHY reset until link up [ 5684.695797] eth0: PHY reset until link up [ 5694.807252] eth0: PHY reset until link up [ 5704.926351] eth0: PHY reset until link up [ 5715.008012] eth0: PHY reset until link up [ 5725.090150] eth0: PHY reset until link up [ 5735.174100] eth0: PHY reset until link up [ 5745.257865] eth0: PHY reset until link up [ 5755.350869] eth0: PHY reset until link up [ 5765.456932] eth0: PHY reset until link up [ 5775.548778] eth0: PHY reset until link up [ 5785.623998] eth0: PHY reset until link up [ 5795.713470] eth0: PHY reset until link up [ 5805.816598] eth0: PHY reset until link up [ 5815.922678] eth0: PHY reset until link up [ 5826.029024] eth0: PHY reset until link up [ 5836.118655] eth0: PHY reset until link up [ 5846.233926] eth0: PHY reset until link up [ 5856.327875] eth0: PHY reset until link up [ 5866.433593] eth0: PHY reset until link up [ 5876.536132] eth0: PHY reset until link up [ 5886.639885] eth0: PHY reset until link up [ 5896.728954] eth0: PHY reset until link up ** Loaded modules: Module Size Used by r8169 31492 0 hci_usb 18460 2 nvidia 8105072 36 rfcomm 38176 0 l2cap 23936 5 rfcomm bluetooth 57124 7 hci_usb,rfcomm,l2cap ppdev 11656 0 parport_pc 31016 0 lp 14724 0 parport 41776 3 ppdev,parport_pc,lp autofs4 24200 1 acpi_cpufreq 11792 1 cpufreq_powersave 6400 0 cpufreq_conservative 11784 0 cpufreq_stats 9120 0 cpufreq_ondemand 11792 1 cpufreq_userspace 8452 0 freq_table 9344 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand fuse 53184 1 sbp2 25356 0 loop 19468 0 joydev 14848 0 snd_hda_intel 434904 2 snd_pcm_oss 41760 0 snd_mixer_oss 18816 1 snd_pcm_oss snd_pcm 81672 2 snd_hda_intel,snd_pcm_oss snd_seq_dummy 7428 0 snd_seq_oss 33152 0 arc4 6272 2 ecb 7296 2 crypto_blkcipher 21636 1 ecb snd_seq_midi 11072 0 snd_rawmidi 26784 1 snd_seq_midi iwl4965 107208 0 firmware_class 12544 1 iwl4965 snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi iwlcore 31360 1 iwl4965 snd_seq 54304 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event rfkill 11168 2 iwlcore uvcvideo 55560 0 snd_timer 25744 2 snd_pcm,snd_seq mac80211 162864 2 iwl4965,iwlcore compat_ioctl32 12288 1 uvcvideo serio_raw 9860 0 videodev 35840 2 uvcvideo,compat_ioctl32 snd_seq_device 11668 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq i2c_i801 13596 0 v4l1_compat 17284 2 uvcvideo,videodev led_class 8968 1 iwlcore pcspkr 7040 0 psmouse 42268 0 i2c_core 27936 2 nvidia,i2c_i801 iTCO_wdt 15696 0 snd 63688 13 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 30224 2 iwl4965,mac80211 battery 16904 0 soundcore 12064 1 snd snd_page_alloc 13072 2 snd_hda_intel,snd_pcm ac 9352 0 video 24212 6 output 7808 1 video button 11680 0 intel_agp 31728 0 evdev 14208 11 ext3 125072 2 jbd 51240 1 ext3 mbcache 12804 1 ext3 sg 36448 0 sr_mod 19652 0 sd_mod 29376 4 cdrom 37928 1 sr_mod ata_piix 22660 3 ata_generic 10116 0 usbhid 45792 0 hid 41792 1 usbhid ff_memless 9224 1 usbhid ohci1394 32564 0 ide_pci_generic 9220 0 [permanent] ide_core 128284 1 ide_pci_generic sdhci 19460 0 mmc_core 52448 1 sdhci ieee1394 93816 2 sbp2,ohci1394 sata_sil24 18180 0 libata 165472 3 ata_piix,ata_generic,sata_sil24 scsi_mod 160760 5 sbp2,sg,sr_mod,sd_mod,libata dock 14112 1 libata ehci_hcd 36108 0 uhci_hcd 25760 0 thermal 22688 0 processor 42304 4 acpi_cpufreq,thermal fan 9352 0 thermal_sys 17728 4 video,thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) Subsystem: Micro-Star International Co., Ltd. Device [1462:3fad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: c0000000-d30fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 60a0 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6080 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at d8204400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) Subsystem: Micro-Star International Co., Ltd. Device [1462:3fad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at d8200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: d6d00000-d80fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d5900000-d6cfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d4500000-d58fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: d3100000-d44fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 6060 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 6040 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 6020 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at d8204000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 Memory behind bridge: d8100000-d81fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) Subsystem: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 03) (prog-if 80 [Master]) Subsystem: Micro-Star International Co., Ltd. Device [1462:3fad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 60d0 [size=16] Region 5: I/O ports at 60c0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ide-pci-generic, ata_generic, ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) Subsystem: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at d8204800 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 6000 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8600M GT [10de:0407] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. Device [1462:3fad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at 5000 [size=128] [virtual] Expansion ROM at d3000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidiafb, nvidia 02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61) Subsystem: Intel Corporation Device [8086:1101] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1273 Region 0: Memory at d6d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwl4965 Kernel modules: iwl4965 03:00.0 Mass storage controller [0180]: Silicon Image, Inc. Sil 3531 [SATALink/SATARaid] Serial ATA Controller [1095:3531] (rev 01) Subsystem: Silicon Image, Inc. Sil 3531 [SATALink/SATARaid] Serial ATA Controller [1095:3531] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d5902000 (64-bit, non-prefetchable) [size=128] Region 2: Memory at d5900000 (64-bit, non-prefetchable) [size=8K] Region 4: I/O ports at 3000 [size=128] Capabilities: <access denied> Kernel driver in use: sata_sil24 Kernel modules: sata_sil24 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Micro-Star International Co., Ltd. Device [1462:3fad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1274 Region 0: I/O ports at 1000 [size=256] Region 2: Memory at d3120000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at d3100000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 06:04.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:3fad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d8100000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: ohci1394 06:04.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) Subsystem: Micro-Star International Co., Ltd. Device [1462:3fad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at d8100900 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci Kernel modules: sdhci 06:04.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12) Subsystem: Micro-Star International Co., Ltd. Device [1462:3fad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 11 Region 0: Memory at d8100800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> -- System Information: Debian Release: 5.0 APT prefers stable APT policy: (900, 'stable'), (800, 'testing'), (700, 'unstable'), (600, 'experimental'), (500, 'proposed-updates') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-amd64 recommends no packages. Versions of packages linux-image-2.6.26-1-amd64 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
--- End Message ---
--- Begin Message ---
- To: 516187-done@bugs.debian.org
- Subject: Re: linux-image-2.6.26-1-amd64: r8169 module : ethernet port always down
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Tue, 31 May 2011 05:38:21 +0100
- Message-id: <1306816701.4277.114.camel@localhost>
- In-reply-to: <20100502185133.GA6879@galadriel.inutil.org>
- References: <20091227004927.GI2721@decadent.org.uk> <20100502185133.GA6879@galadriel.inutil.org>
On Sun, 2010-05-02 at 20:51 +0200, Moritz Muehlenhoff wrote: > On Sun, Dec 27, 2009 at 12:49:27AM +0000, Ben Hutchings wrote: > > There is a pending stable update to Debian 5.0 "lenny" that may > > fix this issue. Please test it. You will need to add the > > stable-proposed-updates suite to your APT sources, e.g. add this > > line to /etc/apt/sources.list: > > > > deb http://ftp.debian.org/debian lenny-proposed-updates main > > > > Then run: > > > > apt-get update > > apt-get install linux-image-2.6.26-2-amd64=2.6.26-21 > > Olivier, > does it work correctly with the latest Lenny kernel? Closing due to lack of response. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---