Bug#627612: linux-image-2.6.39-1-686-pae: Kernel boots but syslog contains references to kernel null pointer
Package: linux-2.6
Version: 2.6.39-1
Severity: normal
Tags: sid
Kernel eventually boots...and **seems** to operate normally but I found this in
syslog.
May 22 12:25:21 sid kernel: [ 5.626206] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
May 22 12:25:21 sid kernel: [ 5.626215] ACPI: Power Button [PWRF]
May 22 12:25:21 sid kernel: [ 5.684298] ACPI: acpi_idle registered with
cpuidle
May 22 12:25:21 sid kernel: [ 5.698554] BUG: unable to handle kernel NULL
pointer dereference at (null)
May 22 12:25:21 sid kernel: [ 5.698680] IP: [< (null)>] (null)
May 22 12:25:21 sid kernel: [ 5.698762] *pdpt = 000000003734f001 *pde =
0000000000000000
May 22 12:25:21 sid kernel: [ 5.698863] Oops: 0000 [#1] SMP
May 22 12:25:21 sid kernel: [ 5.698959] last sysfs file:
/sys/devices/pci0000:00/0000:00:1d.7/usb1/idProduct
May 22 12:25:21 sid kernel: [ 5.699003] Modules linked in: processor video
thermal_sys button ext3 jbd mbcache usb_storage uas sg sr_mod sd_mod cdrom
crc_t10dif ata_generic ata_piix uhci_hcd libata ehci_hcd scsi_mod usbcore e100
mii [last unloaded: scsi_wait_scan]
May 22 12:25:21 sid kernel: [ 5.699813]
May 22 12:25:21 sid kernel: [ 5.699849] Pid: 318, comm: usb_id Not tainted
2.6.39-1-686-pae #1 /D865GBF
May 22 12:25:21 sid kernel: [ 5.699987] EIP: 0060:[<00000000>] EFLAGS:
00000000 CPU: 0
May 22 12:25:21 sid kernel: [ 5.700014] EIP is at 0x0
May 22 12:25:21 sid kernel: [ 5.700014] EAX: 00000000 EBX: 000003a9 ECX:
f719c0d9 EDX: 00000000
May 22 12:25:21 sid kernel: [ 5.700014] ESI: 000003a9 EDI: 00000000 EBP:
c1158635 ESP: f72dfce8
May 22 12:25:21 sid kernel: [ 5.700014] DS: fd06 ES: 007b FS: c884 GS: 00e0
SS: 0068
May 22 12:25:21 sid kernel: [ 5.700014] Process usb_id (pid: 318,
ti=f72de000 task=f5bd7b00 task.ti=f73e8000)
May 22 12:25:21 sid kernel: [ 5.700014] Stack:
May 22 12:25:21 sid kernel: [ 5.700014] 0000158c f582e400 c1011cbf f63071c0
000003a3 0803c000 00001306 00000002
May 22 12:25:21 sid kernel: [ 5.700014] f6302198 f6302298 00000000 c1012716
f6302198 f6308f4c 00000000 c10125fb
May 22 12:25:21 sid kernel: [ 5.700014] 00000001 f6308f7c 00000000 f6308f4c
00000000 f63042b0 00000001 00000000
May 22 12:25:21 sid kernel: [ 5.700014] Call Trace:
May 22 12:25:21 sid kernel: [ 5.700014] [<c1011cbf>] ?
p4_pmu_enable_event+0x102/0x10b
May 22 12:25:21 sid kernel: [ 5.700014] [<c1012716>] ?
p4_pmu_enable_all+0x2a/0x37
May 22 12:25:21 sid kernel: [ 5.700014] [<c10125fb>] ?
x86_pmu_enable+0x1d1/0x243
May 22 12:25:21 sid kernel: [ 5.700014] [<c104f017>] ?
hrtimer_forward+0x10f/0x123
May 22 12:25:21 sid kernel: [ 5.700014] [<c105307c>] ?
timekeeping_get_ns+0x11/0x4f
May 22 12:25:21 sid kernel: [ 5.700014] [<c101b24e>] ?
lapic_next_event+0x13/0x16
May 22 12:25:21 sid kernel: [ 5.700014] [<c10573f5>] ?
clockevents_program_event+0xd2/0xe4
May 22 12:25:21 sid kernel: [ 5.700014] [<c10581e0>] ?
tick_dev_program_event+0x1e/0xfc
May 22 12:25:21 sid kernel: [ 5.700014] [<c1058302>] ?
tick_program_event+0x14/0x17
May 22 12:25:21 sid kernel: [ 5.700014] [<c104f643>] ?
hrtimer_interrupt+0x16c/0x236
May 22 12:25:21 sid kernel: [ 5.700014] [<c103bb6a>] ? irq_exit+0x56/0x79
May 22 12:25:21 sid kernel: [ 5.700014] [<c101bc1b>] ?
smp_apic_timer_interrupt+0x6b/0x75
May 22 12:25:21 sid kernel: [ 5.700014] [<c12b24d1>] ?
apic_timer_interrupt+0x31/0x38
May 22 12:25:21 sid kernel: [ 5.700014] [<c105c47d>] ?
generic_exec_single+0x58/0x65
May 22 12:25:21 sid kernel: [ 5.700014] [<c1026807>] ? leave_mm+0x29/0x29
May 22 12:25:21 sid kernel: [ 5.700014] [<c105c5fc>] ?
smp_call_function_single+0xd1/0xe2
May 22 12:25:21 sid kernel: [ 5.700014] [<c1026807>] ? leave_mm+0x29/0x29
May 22 12:25:21 sid kernel: [ 5.700014] [<c1026807>] ? leave_mm+0x29/0x29
May 22 12:25:21 sid kernel: [ 5.700014] [<f837a000>] ? 0xf8379fff
May 22 12:25:21 sid kernel: [ 5.700014] [<c105c832>] ?
smp_call_function+0x17/0x1b
May 22 12:25:21 sid kernel: [ 5.700014] [<c105c843>] ? on_each_cpu+0xd/0x30
May 22 12:25:21 sid kernel: [ 5.700014] [<f837a000>] ? 0xf8379fff
May 22 12:25:21 sid kernel: [ 5.700014] [<c10aa511>] ?
kmap_flush_unused+0xf/0x16
May 22 12:25:21 sid kernel: [ 5.700014] [<c102418f>] ?
change_page_attr_set_clr+0xf7/0x338
May 22 12:25:21 sid kernel: [ 5.700014] [<c1050437>] ?
down_timeout+0x36/0x3d
May 22 12:25:21 sid kernel: [ 5.700014] [<c12b10a2>] ? mutex_lock+0xb/0x24
May 22 12:25:21 sid kernel: [ 5.700014] [<c12b10a2>] ? mutex_lock+0xb/0x24
May 22 12:25:21 sid kernel: [ 5.700014] [<c12b4f3f>] ?
kprobes_module_callback+0xf5/0x109
May 22 12:25:21 sid kernel: [ 5.700014] [<c11ac8f9>] ?
acpi_ut_release_read_lock+0x40/0x45
May 22 12:25:21 sid kernel: [ 5.700014] [<c1051841>] ?
lowest_in_progress+0x5d/0x66
May 22 12:25:21 sid kernel: [ 5.700014] [<c10245e0>] ?
change_page_attr_set+0x22/0x26
May 22 12:25:21 sid kernel: [ 5.700014] [<c10245f7>] ?
set_memory_rw+0x13/0x17
May 22 12:25:21 sid kernel: [ 5.700014] [<f837a000>] ? 0xf8379fff
May 22 12:25:21 sid kernel: [ 5.700014] [<c1060ce9>] ?
sys_init_module+0xdca/0xe7d
May 22 12:25:21 sid kernel: [ 5.700014] [<c12b6fdf>] ?
sysenter_do_call+0x12/0x28
May 22 12:25:21 sid kernel: [ 5.700014] Code: Bad EIP value.
May 22 12:25:21 sid kernel: [ 5.700014] EIP: [<00000000>] 0x0 SS:ESP
0068:f72dfce8
May 22 12:25:21 sid kernel: [ 5.700014] CR2: 0000000000000000
May 22 12:25:21 sid kernel: [ 5.700014] ---[ end trace 6b500ddaea15c049 ]---
May 22 12:25:21 sid kernel: [ 5.880396] pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
May 22 12:25:21 sid kernel: [ 5.933806] Intel 82802 RNG detected
May 22 12:25:21 sid kernel: [ 6.046149] parport_pc 00:08: reported by Plug
and Play ACPI
May 22 12:25:21 sid kernel: [ 6.046276] parport0: PC-style at 0x378, irq 7
[PCSPP,TRISTATE]
May 22 12:25:21 sid kernel: [ 6.137541] shpchp: Standard Hot Plug PCI
Controller Driver version: 0.4
May 22 12:25:21 sid kernel: [ 6.188771] input: PC Speaker as
/devices/platform/pcspkr/input/input3
May 22 12:25:21 sid kernel: [ 6.241491] Intel ICH 0000:00:1f.5: PCI INT B ->
GSI 17 (level, low) -> IRQ 17
May 22 12:25:21 sid kernel: [ 6.241638] Intel ICH 0000:00:1f.5: setting
latency timer to 64
May 22 12:25:21 sid kernel: [ 6.406019] [drm] Initialized drm 1.1.0 20060810
-- Package-specific info:
** Version:
Linux version 2.6.39-1-686-pae (Debian 2.6.39-1) (maks@debian.org) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Fri May 20 20:40:05 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-1-686-pae root=UUID=e27e5d70-6d89-407c-a7c0-078ae4a0e704 ro quiet
** Not tainted
** Kernel log:
[ 3.371292] sd 2:0:0:0: [sda] Write Protect is off
[ 3.371299] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.371357] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.371860] sda: detected capacity change from 0 to 500107862016
[ 3.377608] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.377614] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.377893] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.394319] sr1: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
[ 3.394617] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 3.422069] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 3.422986] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.438794] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 3.439161] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 3.439289] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.491504] usb 1-2: New USB device found, idVendor=0930, idProduct=6545
[ 3.491511] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.491515] usb 1-2: Product: USB Flash Memory
[ 3.491519] usb 1-2: Manufacturer:
[ 3.491522] usb 1-2: SerialNumber: 5B820B000105
[ 3.517382] usbcore: registered new interface driver uas
[ 3.529161] Initializing USB Mass Storage driver...
[ 3.529594] scsi4 : usb-storage 1-2:1.0
[ 3.529808] usbcore: registered new interface driver usb-storage
[ 3.529814] USB Mass Storage support registered.
[ 3.864059] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 4.037025] usb 3-1: New USB device found, idVendor=04a9, idProduct=220d
[ 4.037035] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.037043] usb 3-1: Product: CanoScan
[ 4.037048] usb 3-1: Manufacturer: Canon
[ 4.071329] EXT3-fs: barriers not enabled
[ 4.082736] kjournald starting. Commit interval 5 seconds
[ 4.082797] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 4.529353] scsi 4:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 0 CCS
[ 4.530109] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 4.531086] sd 4:0:0:0: [sdb] 7823360 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 4.531580] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.531585] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 4.531589] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.534630] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.534680] sdb: detected capacity change from 0 to 4005560320
[ 4.535380] sdb: sdb1
[ 4.536955] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.537002] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 5.181007] udevd[245]: starting version 170
[ 5.663844] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 5.663863] ACPI: Sleep Button [SLPB]
[ 5.663994] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.664843] ACPI: Power Button [PWRF]
[ 5.752106] ACPI: acpi_idle registered with cpuidle
[ 5.766590] modprobe[324]: segfault at c118d995 ip c118d995 sp f72f3e48 error 5
[ 5.843425] parport_pc 00:08: reported by Plug and Play ACPI
[ 5.843482] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.004491] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.008076] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.011865] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.021288] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.293938] [drm] Initialized drm 1.1.0 20060810
[ 6.384364] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.384425] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 6.812113] intel8x0_measure_ac97_clock: measured 55624 usecs (2680 samples)
[ 6.812118] intel8x0: clocking to 48000
[ 6.812905] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.812918] i915 0000:00:02.0: setting latency timer to 64
[ 6.832545] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.832551] [drm] Driver supports precise vblank timestamp query.
[ 6.844967] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 6.846311] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.846799] [drm] initialized overlay support
[ 6.978760] fbcon: inteldrmfb (fb0) is primary device
[ 7.049856] Console: switching to colour frame buffer device 210x65
[ 7.057014] fb0: inteldrmfb frame buffer device
[ 7.057017] drm: registered panic notifier
[ 7.057247] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.518876] Adding 196996k swap on /dev/sda1. Priority:-1 extents:1 across:196996k
[ 10.065408] EXT3-fs (sda2): using internal journal
[ 10.189260] loop: module loaded
[ 11.681455] EXT3-fs: barriers not enabled
[ 11.681726] kjournald starting. Commit interval 5 seconds
[ 11.682005] EXT3-fs (sda3): using internal journal
[ 11.682013] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 11.818006] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 11.883555] EXT3-fs: barriers not enabled
[ 11.893402] kjournald starting. Commit interval 5 seconds
[ 11.893805] EXT3-fs (sda5): using internal journal
[ 11.893813] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 12.621743] RPC: Registered udp transport module.
[ 12.621752] RPC: Registered tcp transport module.
[ 12.621757] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.711653] FS-Cache: Loaded
[ 12.848789] FS-Cache: Netfs 'nfs' registered for caching
[ 12.881327] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.884215] e100 0000:01:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 12.887016] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.908493] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.677094] fuse init (API version 7.16)
[ 13.878592] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e
[ 13.928837] microcode: CPU1 sig=0xf29, pf=0x4, revision=0x2e
[ 13.937212] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 23.872012] eth0: no IPv6 routers present
[ 985.083234] exe (1851): /proc/1851/oom_adj is deprecated, please use /proc/1851/oom_score_adj instead.
** Model information
not available
** Loaded modules:
Module Size Used by
microcode 13231 0
fuse 55666 1
nfsd 196206 2
nfs 219235 0
lockd 60891 2 nfsd,nfs
fscache 31438 1 nfs
auth_rpcgss 31819 2 nfsd,nfs
nfs_acl 12463 2 nfsd,nfs
sunrpc 137017 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
nls_utf8 12416 1
nls_cp437 12417 1
vfat 16989 1
fat 44149 1 vfat
lm85 17907 0
hwmon_vid 12364 1 lm85
loop 17777 0
i915 286502 2
snd_intel8x0 22287 0
snd_ac97_codec 83732 1 snd_intel8x0
drm_kms_helper 26550 1 i915
drm 129190 3 i915,drm_kms_helper
ac97_bus 12462 1 snd_ac97_codec
snd_pcm 52731 2 snd_intel8x0,snd_ac97_codec
snd_seq 39172 0
snd_timer 22171 2 snd_pcm,snd_seq
snd_seq_device 12995 1 snd_seq
psmouse 45863 0
snd 38189 6 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
evdev 13084 7
serio_raw 12758 0
soundcore 12878 1 snd
i2c_i801 12670 0
snd_page_alloc 12841 2 snd_intel8x0,snd_pcm
shpchp 26653 0
pcspkr 12515 0
pci_hotplug 26303 1 shpchp
i2c_algo_bit 12706 1 i915
i2c_core 19022 6 lm85,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
parport_pc 21895 0
parport 27018 1 parport_pc
video 17345 1 i915
processor 26983 0
thermal_sys 17667 2 video,processor
button 12783 1 i915
ext3 102125 3
jbd 40818 1 ext3
mbcache 12810 1 ext3
usb_storage 34951 1
uas 12975 0
sg 21385 0
sr_mod 17418 0
sd_mod 35060 7
cdrom 34631 1 sr_mod
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
ata_piix 21079 4
libata 132100 2 ata_generic,ata_piix
uhci_hcd 21850 0
ehci_hcd 34885 0
scsi_mod 134453 6 usb_storage,uas,sg,sr_mod,sd_mod,libata
usbcore 99225 5 usb_storage,uas,uhci_hcd,ehci_hcd
e100 31318 0
mii 12595 1 e100
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:f1:90:91:ef brd ff:ff:ff:ff:ff:ff
inet 192.168.0.105/24 brd 192.168.0.255 scope global eth0
inet6 fe80::20c:f1ff:fe90:91ef/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 708 13 0 0 0 0 0 0 708 13 0 0 0 0 0 0
eth0: 13912879 10533 0 0 0 0 0 0 563524 6571 0 0 0 0 0 0
*** Protocol statistics:
Ip:
10497 total packets received
0 forwarded
0 incoming packets discarded
10496 incoming packets delivered
6508 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
101 active connections openings
2 passive connection openings
0 failed connection attempts
3 connection resets received
2 connections established
10067 segments received
6102 segments send out
0 segments retransmited
0 bad segments received.
7 resets sent
Udp:
388 packets received
0 packets to unknown port received.
0 packet receive errors
386 packets sent
UdpLite:
TcpExt:
58 TCP sockets finished time wait in fast timer
57 delayed acks sent
14 packets directly queued to recvmsg prequeue.
2930 bytes directly received in process context from prequeue
8866 packet headers predicted
2 packets header predicted and directly queued to user
260 acknowledgments not containing data payload received
166 predicted acknowledgments
1 connections reset due to early user close
TCPSackShiftFallback: 1
IpExt:
InMcastPkts: 52
OutMcastPkts: 36
InBcastPkts: 7
InOctets: 13765988
OutOctets: 466583
InMcastOctets: 4185
OutMcastOctets: 3761
InBcastOctets: 1831
*** Device features:
eth0: 0x4000
lo: 0x201b7c65
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ec00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at cc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff800000-ff8fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at d800 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at c400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:e001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 01)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:302f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ff8ff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at bc00 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
Bus 003 Device 002: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.39-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.39-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-1-686-pae recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-4 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.39-1-686-pae suggests:
ii grub-pc 1.99-4 GRand Unified Bootloader, version
pn linux-doc-2.6.39 <none> (no description available)
Versions of packages linux-image-2.6.39-1-686-pae is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.30 Binary firmware for various driver
ii firmware-linux-nonfree 0.30 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.39-1-686-pae/postinst/depmod-error-initrd-2.6.39-1-686-pae: false
linux-image-2.6.39-1-686-pae/postinst/ignoring-ramdisk:
linux-image-2.6.39-1-686-pae/postinst/missing-firmware-2.6.39-1-686-pae:
linux-image-2.6.39-1-686-pae/prerm/removing-running-kernel-2.6.39-1-686-pae: true
Reply to: