[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#613536: marked as done (firmware-realtek: Please include the binary firmware for Realtek RTL8188CE)



Your message dated Wed, 18 May 2011 04:48:14 +0000
with message-id <E1QMYgA-0006tp-NJ@franck.debian.org>
and subject line Bug#613536: fixed in firmware-nonfree 0.30
has caused the Debian Bug report #613536,
regarding firmware-realtek: Please include the binary firmware for Realtek RTL8188CE
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
613536: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613536
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: firmware-realtek
Version: 0.28
Severity: wishlist

*** Please type your report below this line ***

Hi,

Please include the binary firmware for Realtek RTL8188CE [1] in the
package "firmware-realtek". This hardware is included in the netbook
Dell Inspiron Mini 10 (1018).

Currently if you try to download the binary firmware for RTL8188CE, you
get it for RTL8192CE but the readme file says: "This driver supports
RealTek rtl8192CE/8188CE PCI Wireless LAN NIC", and RTL8192CE was in
upstream since 3 months ago [2].

Currently I have it working with the instructions from the readme file
after the installation of "build-essential",  and "linux-headers-`uname
-r`":

    1. Change to Super User
        su -
    2. Compile driver from the source code
        make
    3. Install the driver to the kernel
        make install
        reboot
    4. Uninstall driver (not tested yet xD)
        make uninstall

Here's the relevant information from lspci:

07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE
802.11b/g/n WiFi Adapter (rev 01)
	Subsystem: Dell Device 8198
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 3000 [size=256]
	Region 2: Memory at f0100000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: rtl8192CE

In the attached files you'll find the output from "lspci -vv" and
"dmesg" commands. Any other required information please don't hesitate
to ask.

Thanks for your patience until now ;-)

-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

firmware-realtek depends on no packages.

firmware-realtek recommends no packages.

Versions of packages firmware-realtek suggests:
ii  initramfs-tools               0.98.8     tools for generating an
initramfs
ii  linux-image-2.6.32-5-amd64 [l 2.6.32-30  Linux 2.6.32 for 64-bit PCs

-- no debconf information

Best Regards,

P.S. Currently the wireless connection is lost aproximately every 5
minutes and reconnected automatically using wicd, but I don't know how
to report this, so any help will be very appreciated.

[1]
http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=48&PFid=48&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true#RTL8188CE
[2]
http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git;a=commit;h=8f919160792e4702c6b7a67a243cea4f757407e4
-- 
Fernando C. Estrada
e0000000 - efffffff
[    0.175928] PCI: Using configuration type 1 for base access
[    0.176657] bio: create slab <bio-0> at 0
[    0.177099] ACPI: EC: Look up EC in DSDT
[    0.186055] ACPI: Interpreter enabled
[    0.186055] ACPI: (supports S0 S3 S4 S5)
[    0.186055] ACPI: Using IOAPIC for interrupt routing
[    0.233142] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.233627] ACPI: No dock devices found.
[    0.235741] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.235755] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f1a86c0), AE_ALREADY_EXISTS
[    0.235770] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.235821] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.235966] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0200000-0xf027ffff]
[    0.235975] pci 0000:00:02.0: reg 14 io port: [0x18d0-0x18d7]
[    0.235983] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.235991] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0000000-0xf00fffff]
[    0.236047] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0280000-0xf02fffff]
[    0.236174] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0300000-0xf0303fff]
[    0.236243] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.236251] pci 0000:00:1b.0: PME# disabled
[    0.236358] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.236366] pci 0000:00:1c.0: PME# disabled
[    0.236483] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.236491] pci 0000:00:1c.1: PME# disabled
[    0.236571] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[    0.236647] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[    0.236722] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[    0.236796] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[    0.236877] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0504000-0xf05043ff]
[    0.236946] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.236954] pci 0000:00:1d.7: PME# disabled
[    0.237126] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[    0.237213] pci 0000:00:1f.2: reg 10 io port: [0x18e8-0x18ef]
[    0.237224] pci 0000:00:1f.2: reg 14 io port: [0x18dc-0x18df]
[    0.237236] pci 0000:00:1f.2: reg 18 io port: [0x18e0-0x18e7]
[    0.237248] pci 0000:00:1f.2: reg 1c io port: [0x18d8-0x18db]
[    0.237259] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18cf]
[    0.237271] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0504400-0xf05047ff]
[    0.237315] pci 0000:00:1f.2: PME# supported from D3hot
[    0.237322] pci 0000:00:1f.2: PME# disabled
[    0.237386] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
[    0.237493] pci 0000:05:00.0: reg 10 io port: [0x2000-0x20ff]
[    0.237524] pci 0000:05:00.0: reg 18 64bit mmio pref: [0xf0f2c000-0xf0f2cfff]
[    0.237547] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xf0f18000-0xf0f1bfff]
[    0.237617] pci 0000:05:00.0: supports D1 D2
[    0.237622] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.237632] pci 0000:05:00.0: PME# disabled
[    0.244136] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[    0.244152] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0f00000-0xf0ffffff]
[    0.244260] pci 0000:07:00.0: reg 10 io port: [0x3000-0x30ff]
[    0.244301] pci 0000:07:00.0: reg 18 64bit mmio: [0xf0100000-0xf0103fff]
[    0.244412] pci 0000:07:00.0: supports D1 D2
[    0.244417] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.244429] pci 0000:07:00.0: PME# disabled
[    0.252162] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[    0.252171] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[    0.252244] pci 0000:00:1e.0: transparent bridge
[    0.252290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.252499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.252626] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.252764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.253111] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.253124] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f1a86c0), AE_ALREADY_EXISTS
[    0.265001] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.265199] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.265393] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.265587] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.265804] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.266012] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.266217] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.266421] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.266650] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.266670] vgaarb: loaded
[    0.266714] PCI: Using ACPI for IRQ routing
[    0.266714] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.266714] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.272030] Switching to clocksource tsc
[    0.274333] pnp: PnP ACPI init
[    0.274368] ACPI: bus type pnp registered
[    0.296684] pnp: PnP ACPI: found 8 devices
[    0.296689] ACPI: ACPI bus type pnp unregistered
[    0.296717] system 00:01: ioport range 0x800-0x80f has been reserved
[    0.296724] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.296731] system 00:01: ioport range 0x1180-0x11bf has been reserved
[    0.296738] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.296746] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[    0.296753] system 00:01: ioport range 0x164e-0x174c has been reserved
[    0.296761] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.296769] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.296777] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[    0.296784] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[    0.301836] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[    0.301844] pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
[    0.301854] pci 0000:00:1c.0:   MEM window: 0x40000000-0x403fffff
[    0.301863] pci 0000:00:1c.0:   PREFETCH window: 0x000000f0f00000-0x000000f0ffffff
[    0.301875] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:07
[    0.301881] pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
[    0.301891] pci 0000:00:1c.1:   MEM window: 0xf0100000-0xf01fffff
[    0.301900] pci 0000:00:1c.1:   PREFETCH window: 0x00000040400000-0x000000405fffff
[    0.301911] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:11
[    0.301916] pci 0000:00:1e.0:   IO window: disabled
[    0.301924] pci 0000:00:1e.0:   MEM window: disabled
[    0.301931] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.301958]   alloc irq_desc for 16 on node -1
[    0.301963]   alloc kstat_irqs on node -1
[    0.301982] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.301992] pci 0000:00:1c.0: setting latency timer to 64
[    0.302008]   alloc irq_desc for 17 on node -1
[    0.302012]   alloc kstat_irqs on node -1
[    0.302021] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.302029] pci 0000:00:1c.1: setting latency timer to 64
[    0.302042] pci 0000:00:1e.0: setting latency timer to 64
[    0.302051] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.302057] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.302064] pci_bus 0000:05: resource 0 io:  [0x2000-0x2fff]
[    0.302070] pci_bus 0000:05: resource 1 mem: [0x40000000-0x403fffff]
[    0.302076] pci_bus 0000:05: resource 2 pref mem [0xf0f00000-0xf0ffffff]
[    0.302082] pci_bus 0000:07: resource 0 io:  [0x3000-0x3fff]
[    0.302087] pci_bus 0000:07: resource 1 mem: [0xf0100000-0xf01fffff]
[    0.302093] pci_bus 0000:07: resource 2 pref mem [0x40400000-0x405fffff]
[    0.302100] pci_bus 0000:11: resource 3 io:  [0x00-0xffff]
[    0.302106] pci_bus 0000:11: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.302177] NET: Registered protocol family 2
[    0.302407] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.303368] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.305098] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.305833] TCP: Hash tables configured (established 131072 bind 65536)
[    0.305840] TCP reno registered
[    0.306054] NET: Registered protocol family 1
[    0.306116] pci 0000:00:02.0: Boot video device
[    0.306357] Unpacking initramfs...
[    0.749760] Freeing initrd memory: 8954k freed
[    0.756919] Simple Boot Flag at 0x35 set to 0x1
[    0.757594] audit: initializing netlink socket (disabled)
[    0.757620] type=2000 audit(1297778017.755:1): initialized
[    0.763524] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.766712] VFS: Disk quotas dquot_6.5.2
[    0.766846] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.767014] msgmni has been set to 1984
[    0.767474] alg: No test for stdrng (krng)
[    0.767610] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.767617] io scheduler noop registered
[    0.767621] io scheduler anticipatory registered
[    0.767625] io scheduler deadline registered
[    0.767705] io scheduler cfq registered (default)
[    0.768375]   alloc irq_desc for 24 on node -1
[    0.768382]   alloc kstat_irqs on node -1
[    0.768404] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.768420] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.768653]   alloc irq_desc for 25 on node -1
[    0.768658]   alloc kstat_irqs on node -1
[    0.768673] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.768687] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.772155] Linux agpgart interface v0.103
[    0.772188] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[    0.772424] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[    0.785339] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.785430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.786085] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.786201] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    0.800204] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.800223] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.800429] mice: PS/2 mouse device common for all mice
[    0.800502] rtc_cmos 00:04: RTC can wake from S4
[    0.800607] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.800654] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.800682] cpuidle: using governor ladder
[    0.800688] cpuidle: using governor menu
[    0.800700] No iBFT detected.
[    0.801353] TCP cubic registered
[    0.801614] NET: Registered protocol family 10
[    0.802558] lo: Disabled Privacy Extensions
[    0.803158] Mobile IPv6
[    0.803166] NET: Registered protocol family 17
[    0.803384] PM: Resume from disk failed.
[    0.803416] registered taskstats version 1
[    0.804016] rtc_cmos 00:04: setting system clock to 2011-02-15 13:53:38 UTC (1297778018)
[    0.804109] Initalizing network drop monitor service
[    0.804170] Freeing unused kernel memory: 592k freed
[    0.804456] Write protecting the kernel read-only data: 4236k
[    0.813087] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.840874] udev[56]: starting version 166
[    1.145632] usbcore: registered new interface driver usbfs
[    1.145704] usbcore: registered new interface driver hub
[    1.145829] usbcore: registered new device driver usb
[    1.153133] SCSI subsystem initialized
[    1.154858] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.154933]   alloc irq_desc for 23 on node -1
[    1.154940]   alloc kstat_irqs on node -1
[    1.154960] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.155001] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.155011] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.155070] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.155132] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.155153] ehci_hcd 0000:00:1d.7: debug port 1
[    1.159063] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.159623] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504000
[    1.166825] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.166870] r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.166942] r8169 0000:05:00.0: setting latency timer to 64
[    1.166955] r8169 0000:05:00.0: unknown MAC, using family default
[    1.167020]   alloc irq_desc for 26 on node -1
[    1.167027]   alloc kstat_irqs on node -1
[    1.167057] r8169 0000:05:00.0: irq 26 for MSI/MSI-X
[    1.168802] eth0: RTL8101e at 0xffffc900001fe000, 5c:26:0a:07:cc:cf, XID 00900000 IRQ 26
[    1.172066] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.172136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.172145] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.172154] usb usb1: Product: EHCI Host Controller
[    1.172160] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    1.172167] usb usb1: SerialNumber: 0000:00:1d.7
[    1.172408] usb usb1: configuration #1 chosen from 1 choice
[    1.172512] hub 1-0:1.0: USB hub found
[    1.172535] hub 1-0:1.0: 8 ports detected
[    1.224130] uhci_hcd: USB Universal Host Controller Interface driver
[    1.224237] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.224257] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.224266] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.224303] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.224366] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.224473] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.224482] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.224490] usb usb2: Product: UHCI Host Controller
[    1.224497] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    1.224504] usb usb2: SerialNumber: 0000:00:1d.0
[    1.224736] usb usb2: configuration #1 chosen from 1 choice
[    1.224858] hub 2-0:1.0: USB hub found
[    1.224884] hub 2-0:1.0: 2 ports detected
[    1.225047]   alloc irq_desc for 19 on node -1
[    1.225055]   alloc kstat_irqs on node -1
[    1.225074] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.225092] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.225101] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.225137] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.225210] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.225317] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.225326] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.225334] usb usb3: Product: UHCI Host Controller
[    1.225340] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    1.225346] usb usb3: SerialNumber: 0000:00:1d.1
[    1.225579] usb usb3: configuration #1 chosen from 1 choice
[    1.225690] hub 3-0:1.0: USB hub found
[    1.225715] hub 3-0:1.0: 2 ports detected
[    1.225903]   alloc irq_desc for 18 on node -1
[    1.225911]   alloc kstat_irqs on node -1
[    1.225931] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.225950] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.225960] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.225999] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.226082] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.226191] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.226200] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.226208] usb usb4: Product: UHCI Host Controller
[    1.226214] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    1.226220] usb usb4: SerialNumber: 0000:00:1d.2
[    1.226473] usb usb4: configuration #1 chosen from 1 choice
[    1.226577] hub 4-0:1.0: USB hub found
[    1.226603] hub 4-0:1.0: 2 ports detected
[    1.226777] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.228178] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.228190] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.228238] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.228318] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.228429] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.228438] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.228446] usb usb5: Product: UHCI Host Controller
[    1.228453] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    1.228459] usb usb5: SerialNumber: 0000:00:1d.3
[    1.228716] usb usb5: configuration #1 chosen from 1 choice
[    1.228815] hub 5-0:1.0: USB hub found
[    1.228840] hub 5-0:1.0: 2 ports detected
[    1.230010] libata version 3.00 loaded.
[    1.243115] ahci 0000:00:1f.2: version 3.0
[    1.243152] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.243242]   alloc irq_desc for 27 on node -1
[    1.243249]   alloc kstat_irqs on node -1
[    1.243276] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    1.243408] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.243421] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    1.243433] ahci 0000:00:1f.2: setting latency timer to 64
[    1.244094] scsi0 : ahci
[    1.244657] scsi1 : ahci
[    1.245045] scsi2 : ahci
[    1.249213] scsi3 : ahci
[    1.249687] ata1: SATA max UDMA/133 abar m1024@0xf0504400 port 0xf0504500 irq 27
[    1.249699] ata2: SATA max UDMA/133 abar m1024@0xf0504400 port 0xf0504580 irq 27
[    1.249709] ata3: SATA max UDMA/133 abar m1024@0xf0504400 port 0xf0504600 irq 27
[    1.249719] ata4: SATA max UDMA/133 abar m1024@0xf0504400 port 0xf0504680 irq 27
[    1.484031] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    1.568035] ata2: SATA link down (SStatus 0 SControl 300)
[    1.568069] ata3: SATA link down (SStatus 0 SControl 300)
[    1.572034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.572068] ata4: SATA link down (SStatus 0 SControl 300)
[    1.573038] ata1.00: ATA-8: Hitachi HTS545016B9A300, PBBOC60S, max UDMA/133
[    1.573046] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.574269] ata1.00: configured for UDMA/133
[    1.589226] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54501 PBBO PQ: 0 ANSI: 5
[    1.603961] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.604197] sd 0:0:0:0: [sda] Write Protect is off
[    1.604208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.604304] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.604884]  sda: sda1 sda2 sda3 sda4
[    1.654258] usb 1-4: New USB device found, idVendor=04f2, idProduct=b201
[    1.654266] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.654272] usb 1-4: Product: Laptop_Integrated_Webcam_0.3M
[    1.654277] usb 1-4: Manufacturer: CNFA025G185010000SQ0
[    1.654458] usb 1-4: configuration #1 chosen from 1 choice
[    1.662347] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.768036] usb 1-8: new high speed USB device using ehci_hcd and address 3
[    1.910925] usb 1-8: New USB device found, idVendor=0bda, idProduct=0158
[    1.910933] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.910939] usb 1-8: Product: USB2.0-CRW
[    1.910944] usb 1-8: Manufacturer: Generic
[    1.910948] usb 1-8: SerialNumber: 20071114173400000
[    1.911133] usb 1-8: configuration #1 chosen from 1 choice
[    1.930572] Initializing USB Mass Storage driver...
[    1.930883] scsi4 : SCSI emulation for USB Mass Storage devices
[    1.931144] usbcore: registered new interface driver usb-storage
[    1.931155] USB Mass Storage support registered.
[    1.931499] usb-storage: device found at 3
[    1.931506] usb-storage: waiting for device to settle before scanning
[    2.240009] PM: Starting manual resume from disk
[    2.240020] PM: Resume from partition 8:4
[    2.240024] PM: Checking hibernation image.
[    2.240210] PM: Error -22 checking image file
[    2.240214] PM: Resume from disk failed.
[    2.323793] EXT4-fs (sda2): mounted filesystem with ordered data mode
[    3.632810] udev[321]: starting version 166
[    4.118959] ACPI: SSDT 000000003f5d8fea 00203 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    4.120327] ACPI: SSDT 000000003f5d8852 00609 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    4.183796] Monitor-Mwait will be used to enter C-1 state
[    4.184991] Monitor-Mwait will be used to enter C-2 state
[    4.185107] Monitor-Mwait will be used to enter C-3 state
[    4.185131] Marking TSC unstable due to TSC halts in idle
[    4.185399] processor LNXCPU:00: registered as cooling_device0
[    4.186776] ACPI: SSDT 000000003f5d91ed 000D4 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    4.187773] ACPI: SSDT 000000003f5d8e5b 00085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    4.189714] Switching to clocksource hpet
[    4.198784] processor LNXCPU:01: registered as cooling_device1
[    4.214239] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input2
[    4.214390] ACPI: Lid Switch [LID0]
[    4.215395] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input3
[    4.215415] ACPI: Power Button [PWRB]
[    4.215641] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    4.215656] ACPI: Power Button [PWRF]
[    4.236237] ACPI: AC Adapter [ACAD] (off-line)
[    4.248910] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    4.260480] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    4.538632] ACPI: Battery Slot [BAT1] (battery present)
[    4.930121] rtllib_crypt: registered algorithm 'NULL'
[    4.930131] rtllib_crypt: registered algorithm 'TKIP'
[    4.930137] rtllib_crypt: registered algorithm 'CCMP'
[    4.930142] rtllib_crypt: registered algorithm 'WEP'
[    4.930147] 
[    4.930149] Linux kernel driver for RTL8192 based WLAN cards
[    4.930155] Copyright (c) 2007-2008, Realsil Wlan Driver
[    4.930258] rtl8192CE 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.930275] rtl8192CE 0000:07:00.0: setting latency timer to 64
[    4.930580] Memory mapped space start: 0xf0100000 
[    4.933362] GetPciBusInfo(): Find Device(10EC:8176)  bus=7 dev=0, func=0
[    4.934429] GetPciBridegInfo : Find Device(8086:27D2)  bus=0 dev=28, func=1
[    4.934437] Pci Bridge Vendor is found index: 0
[    4.934443] Pci Bridge Vendor is 8086
[    4.945041] =========>rtl8192ce_ReadBluetoothCoexistInfoFromHWPG(): EEPROMBluetoothCoexist:0, EEPROMBluetoothType:3
[    4.945052] SWAS: bHwAntDiv = 1
[    4.983012] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0xa0400
[    5.038841] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.078553] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    5.196782] [drm] Initialized drm 1.1.0 20060810
[    5.244929] Linux video capture interface: v2.00
[    5.310930] Error: Driver 'pcspkr' is already registered, aborting...
[    6.157058] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.157071] i915 0000:00:02.0: setting latency timer to 64
[    6.185479]   alloc irq_desc for 28 on node -1
[    6.185489]   alloc kstat_irqs on node -1
[    6.185511] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[    6.185526] [drm] set up 7M of stolen space
[    6.205886] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (04f2:b201)
[    6.216225] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
[    6.216367] usbcore: registered new interface driver uvcvideo
[    6.216375] USB Video Class driver (v0.1.0)
[    6.290374] [drm] initialized overlay support
[    6.760075] [drm] Big FIFO is enabled
[    6.760099] [drm] Big FIFO is enabled
[    6.928342] usb-storage: device scan complete
[    6.930576] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    6.946187] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    6.964225] Console: switching to colour frame buffer device 128x37
[    6.971461] fb0: inteldrmfb frame buffer device
[    6.971468] registered panic notifier
[    6.978985] acpi device:00: registered as cooling_device2
[    6.981781] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    6.987882] ACPI: Video Device [IGD0] (multi-head: yes  rom: no  post: no)
[    6.988801] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.988901]   alloc irq_desc for 22 on node -1
[    6.988909]   alloc kstat_irqs on node -1
[    6.988930] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    6.989116] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.126489] hda_codec: ALC272: BIOS auto-probing.
[    7.127768] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[    7.912360] Adding 1992696k swap on /dev/sda4.  Priority:-1 extents:1 across:1992696k 
[    8.593563] loop: module loaded
[    9.419957] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    9.513230] EXT4-fs (sda3): mounted filesystem with ordered data mode
[   10.534754] fuse init (API version 7.13)
[   11.134478] r8169: eth0: link down
[   11.134879] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.595465] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[   14.805683] lp: driver loaded but no devices found
[   14.887791] ppdev: user-space parallel port driver
[   16.463141] Bluetooth: Core ver 2.15
[   16.463286] NET: Registered protocol family 31
[   16.463292] Bluetooth: HCI device and connection manager initialized
[   16.463299] Bluetooth: HCI socket layer initialized
[   16.483988] Bluetooth: L2CAP ver 2.14
[   16.483995] Bluetooth: L2CAP socket layer initialized
[   16.498831] Bluetooth: RFCOMM TTY layer initialized
[   16.498844] Bluetooth: RFCOMM socket layer initialized
[   16.498850] Bluetooth: RFCOMM ver 1.11
[   16.530849] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.530858] Bluetooth: BNEP filters: protocol multicast
[   16.602535] Bluetooth: SCO (Voice Link) ver 0.6
[   16.602542] Bluetooth: SCO socket layer initialized
[   20.245358] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:1
[   20.245423] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:0
[   20.246705] gen_RefreshLedState first init
[   20.459580] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   20.459677] InitializeAdapter8190(): ????
[   20.572622] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.593976] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[   20.594043] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[   20.595307] gen_RefreshLedState first init
[   20.808296] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   20.808411] InitializeAdapter8190(): ????
[   26.103962] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[   26.104055] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[   26.105339] gen_RefreshLedState first init
[   26.317660] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   26.317759] InitializeAdapter8190(): ????
[   28.465329] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[   28.465394] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[   28.466653] gen_RefreshLedState first init
[   28.679423] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   28.679523] InitializeAdapter8190(): ????
[   28.780373] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.975425] r8169: eth0: link down
[   28.976111] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.050731] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[   29.050796] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[   29.052068] gen_RefreshLedState first init
[   29.264909] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   29.265046] InitializeAdapter8190(): ????
[   29.458195] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[   29.458256] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[   29.459509] gen_RefreshLedState first init
[   29.672352] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   29.672446] InitializeAdapter8190(): ????
[   29.773226] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   31.848864] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[   31.848927] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[   31.850188] gen_RefreshLedState first init
[   32.062891] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   32.062993] InitializeAdapter8190(): ????
[   32.163462] Linking with Me caga la vecina gritaperros,channel:4, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406
[   32.163595] rtllib_associate_procedure_wq(), chan:4
[   32.163608] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   32.173766] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   32.175301] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   32.177184] Associated successfully
[   32.177191] normal associate
[   32.177209] Using G rates:108
[   32.177213] Successfully associated, ht not enabled(0, 0)
[   32.177713] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   32.180620] notify_wx_assoc_event(): Tell user space disconnected
[   32.180663] Linking with Me caga la vecina gritaperros,channel:4, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   32.180772] rtllib_associate_procedure_wq(), chan:4
[   32.180777] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   32.191012] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   32.192823] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   32.196509] Associated successfully
[   32.196519] normal associate
[   32.196548] Using G rates:108
[   32.196554] Successfully associated, ht not enabled(0, 0)
[   35.307528] DHCP pkt src port:68, dest port:67!!
[   36.931576] DHCP pkt src port:68, dest port:67!!
[   37.774868] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[   42.733029] wlan0: no IPv6 routers present
[   67.871172] ==========>received disassoc/deauth(c0) frame, reason code:7
[   67.871196] notify_wx_assoc_event(): Tell user space disconnected
[   67.871214] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   67.889123] rtllib_associate_procedure_wq(), chan:4
[   67.889134] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   67.899278] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   67.900603] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   67.902504] Associated successfully
[   67.902511] normal associate
[   67.902539] Using G rates:108
[   67.902546] Successfully associated, ht not enabled(0, 0)
[   67.973126] ==========>received disassoc/deauth(c0) frame, reason code:7
[   67.973147] notify_wx_assoc_event(): Tell user space disconnected
[   67.973170] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   67.992142] rtllib_associate_procedure_wq(), chan:4
[   67.992152] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.002285] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   68.004047] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.006348] Associated successfully
[   68.006355] normal associate
[   68.006385] Using G rates:108
[   68.006389] Successfully associated, ht not enabled(0, 0)
[   68.075459] ==========>received disassoc/deauth(c0) frame, reason code:7
[   68.075476] notify_wx_assoc_event(): Tell user space disconnected
[   68.075496] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   68.092132] rtllib_associate_procedure_wq(), chan:4
[   68.092142] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.102281] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   68.103688] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.105551] Associated successfully
[   68.105558] normal associate
[   68.105583] Using G rates:108
[   68.105587] Successfully associated, ht not enabled(0, 0)
[   68.177818] ==========>received disassoc/deauth(c0) frame, reason code:7
[   68.177835] notify_wx_assoc_event(): Tell user space disconnected
[   68.177855] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   68.196147] rtllib_associate_procedure_wq(), chan:4
[   68.196157] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.206291] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   68.207624] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.209614] Associated successfully
[   68.209622] normal associate
[   68.209650] Using G rates:108
[   68.209654] Successfully associated, ht not enabled(0, 0)
[   68.280274] ==========>received disassoc/deauth(c0) frame, reason code:7
[   68.280291] notify_wx_assoc_event(): Tell user space disconnected
[   68.280310] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   68.300143] rtllib_associate_procedure_wq(), chan:4
[   68.300153] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.310286] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   68.311654] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.313655] Associated successfully
[   68.313662] normal associate
[   68.313687] Using G rates:108
[   68.313693] Successfully associated, ht not enabled(0, 0)
[   68.382628] ==========>received disassoc/deauth(c0) frame, reason code:7
[   68.382648] notify_wx_assoc_event(): Tell user space disconnected
[   68.382668] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   68.400143] rtllib_associate_procedure_wq(), chan:4
[   68.400153] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.410296] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   68.411966] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.414205] Associated successfully
[   68.414212] normal associate
[   68.414237] Using G rates:108
[   68.414247] Successfully associated, ht not enabled(0, 0)
[   68.485015] ==========>received disassoc/deauth(c0) frame, reason code:7
[   68.485032] notify_wx_assoc_event(): Tell user space disconnected
[   68.485051] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   68.504140] rtllib_associate_procedure_wq(), chan:4
[   68.504149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.514283] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   68.515707] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.517638] Associated successfully
[   68.517646] normal associate
[   68.517671] Using G rates:108
[   68.517678] Successfully associated, ht not enabled(0, 0)
[   68.587501] ==========>received disassoc/deauth(c0) frame, reason code:7
[   68.587518] notify_wx_assoc_event(): Tell user space disconnected
[   68.587537] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   68.604127] rtllib_associate_procedure_wq(), chan:4
[   68.604136] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.614270] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   68.615616] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.617567] Associated successfully
[   68.617575] normal associate
[   68.617603] Using G rates:108
[   68.617607] Successfully associated, ht not enabled(0, 0)
[   68.689933] ==========>received disassoc/deauth(c0) frame, reason code:7
[   68.689950] notify_wx_assoc_event(): Tell user space disconnected
[   68.689970] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   68.708141] rtllib_associate_procedure_wq(), chan:4
[   68.708151] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.718282] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   68.719717] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.721691] Associated successfully
[   68.721699] normal associate
[   68.721721] Using G rates:108
[   68.721728] Successfully associated, ht not enabled(0, 0)
[   68.792218] ==========>received disassoc/deauth(c0) frame, reason code:7
[   68.792235] notify_wx_assoc_event(): Tell user space disconnected
[   68.792256] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   68.812146] rtllib_associate_procedure_wq(), chan:4
[   68.812156] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.822285] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   68.823881] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.826069] Associated successfully
[   68.826076] normal associate
[   68.826101] Using G rates:108
[   68.826105] Successfully associated, ht not enabled(0, 0)
[   68.894738] ==========>received disassoc/deauth(c0) frame, reason code:7
[   68.894760] notify_wx_assoc_event(): Tell user space disconnected
[   68.894781] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   68.912142] rtllib_associate_procedure_wq(), chan:4
[   68.912152] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.922292] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   68.923687] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.925575] Associated successfully
[   68.925582] normal associate
[   68.925606] Using G rates:108
[   68.925613] Successfully associated, ht not enabled(0, 0)
[   68.997223] ==========>received disassoc/deauth(c0) frame, reason code:7
[   68.997240] notify_wx_assoc_event(): Tell user space disconnected
[   68.997261] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   69.016145] rtllib_associate_procedure_wq(), chan:4
[   69.016155] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   69.026286] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   69.027701] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   69.029574] Associated successfully
[   69.029582] normal associate
[   69.029604] Using G rates:108
[   69.029614] Successfully associated, ht not enabled(0, 0)
[   69.099783] ==========>received disassoc/deauth(c0) frame, reason code:7
[   69.099799] notify_wx_assoc_event(): Tell user space disconnected
[   69.099820] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   69.116133] rtllib_associate_procedure_wq(), chan:4
[   69.116142] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   69.126273] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   69.127646] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   69.129706] Associated successfully
[   69.129713] normal associate
[   69.129738] Using G rates:108
[   69.129745] Successfully associated, ht not enabled(0, 0)
[   69.202227] ==========>received disassoc/deauth(c0) frame, reason code:7
[   69.202245] notify_wx_assoc_event(): Tell user space disconnected
[   69.202266] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   69.220141] rtllib_associate_procedure_wq(), chan:4
[   69.220150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   69.230285] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   69.231919] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   69.234031] Associated successfully
[   69.234038] normal associate
[   69.234062] Using G rates:108
[   69.234073] Successfully associated, ht not enabled(0, 0)
[   69.304631] ==========>received disassoc/deauth(c0) frame, reason code:7
[   69.304648] notify_wx_assoc_event(): Tell user space disconnected
[   69.304667] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   69.324129] rtllib_associate_procedure_wq(), chan:4
[   69.324138] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   69.334272] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   69.335692] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   69.337651] Associated successfully
[   69.337658] normal associate
[   69.337687] Using G rates:108
[   69.337691] Successfully associated, ht not enabled(0, 0)
[   69.407129] ==========>received disassoc/deauth(c0) frame, reason code:7
[   69.407148] notify_wx_assoc_event(): Tell user space disconnected
[   69.407171] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   69.424142] rtllib_associate_procedure_wq(), chan:4
[   69.424153] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   69.434292] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   69.435699] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   69.437635] Associated successfully
[   69.437642] normal associate
[   69.437671] Using G rates:108
[   69.437675] Successfully associated, ht not enabled(0, 0)
[   69.509071] ==========>received disassoc/deauth(c0) frame, reason code:7
[   69.509090] notify_wx_assoc_event(): Tell user space disconnected
[   69.509110] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   69.528141] rtllib_associate_procedure_wq(), chan:4
[   69.528150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   69.538284] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   69.539618] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   69.541539] Associated successfully
[   69.541546] normal associate
[   69.541570] Using G rates:108
[   69.541581] Successfully associated, ht not enabled(0, 0)
[   69.611440] ==========>received disassoc/deauth(c0) frame, reason code:7
[   69.611457] notify_wx_assoc_event(): Tell user space disconnected
[   69.611476] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   69.628141] rtllib_associate_procedure_wq(), chan:4
[   69.628150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   69.638286] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   69.639915] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   69.642075] Associated successfully
[   69.642082] normal associate
[   69.642107] Using G rates:108
[   69.642117] Successfully associated, ht not enabled(0, 0)
[   69.713811] ==========>received disassoc/deauth(c0) frame, reason code:7
[   69.713828] notify_wx_assoc_event(): Tell user space disconnected
[   69.713848] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   69.732143] rtllib_associate_procedure_wq(), chan:4
[   69.732153] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   69.742292] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   69.743615] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   69.745577] Associated successfully
[   69.745585] normal associate
[   69.745609] Using G rates:108
[   69.745613] Successfully associated, ht not enabled(0, 0)
[   69.816345] ==========>received disassoc/deauth(c0) frame, reason code:7
[   69.816364] notify_wx_assoc_event(): Tell user space disconnected
[   69.816386] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   69.836145] rtllib_associate_procedure_wq(), chan:4
[   69.836155] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   69.846289] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   69.847734] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   69.849631] Associated successfully
[   69.849639] normal associate
[   69.849663] Using G rates:108
[   69.849669] Successfully associated, ht not enabled(0, 0)
[   69.918838] ==========>received disassoc/deauth(c0) frame, reason code:7
[   69.918862] notify_wx_assoc_event(): Tell user space disconnected
[   69.918884] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   69.936144] rtllib_associate_procedure_wq(), chan:4
[   69.936154] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   69.946286] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   69.947654] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   69.949560] Associated successfully
[   69.949567] normal associate
[   69.949596] Using G rates:108
[   69.949600] Successfully associated, ht not enabled(0, 0)
[   70.021133] ==========>received disassoc/deauth(c0) frame, reason code:7
[   70.021151] notify_wx_assoc_event(): Tell user space disconnected
[   70.021171] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   70.040140] rtllib_associate_procedure_wq(), chan:4
[   70.040149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   70.050289] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   70.051803] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   70.054091] Associated successfully
[   70.054099] normal associate
[   70.054123] Using G rates:108
[   70.054130] Successfully associated, ht not enabled(0, 0)
[   70.123539] ==========>received disassoc/deauth(c0) frame, reason code:7
[   70.123556] notify_wx_assoc_event(): Tell user space disconnected
[   70.123578] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   70.140130] rtllib_associate_procedure_wq(), chan:4
[   70.140140] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   70.150271] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   70.151580] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   70.153521] Associated successfully
[   70.153528] normal associate
[   70.153556] Using G rates:108
[   70.153560] Successfully associated, ht not enabled(0, 0)
[   70.225914] ==========>received disassoc/deauth(c0) frame, reason code:7
[   70.225932] notify_wx_assoc_event(): Tell user space disconnected
[   70.225954] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   70.244139] rtllib_associate_procedure_wq(), chan:4
[   70.244148] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   70.254292] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   70.255666] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   70.257517] Associated successfully
[   70.257524] normal associate
[   70.257549] Using G rates:108
[   70.257556] Successfully associated, ht not enabled(0, 0)
[   70.328244] ==========>received disassoc/deauth(c0) frame, reason code:7
[   70.328261] notify_wx_assoc_event(): Tell user space disconnected
[   70.328280] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   70.348140] rtllib_associate_procedure_wq(), chan:4
[   70.348150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   70.358288] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   70.359640] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   70.361620] Associated successfully
[   70.361628] normal associate
[   70.361652] Using G rates:108
[   70.361656] Successfully associated, ht not enabled(0, 0)
[   70.430741] ==========>received disassoc/deauth(c0) frame, reason code:7
[   70.430759] notify_wx_assoc_event(): Tell user space disconnected
[   70.430778] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   70.448102] rtllib_associate_procedure_wq(), chan:4
[   70.448114] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   70.458251] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   70.459873] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   70.461977] Associated successfully
[   70.461985] normal associate
[   70.462012] Using G rates:108
[   70.462019] Successfully associated, ht not enabled(0, 0)
[   70.533104] ==========>received disassoc/deauth(c0) frame, reason code:7
[   70.533121] notify_wx_assoc_event(): Tell user space disconnected
[   70.533142] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   70.552133] rtllib_associate_procedure_wq(), chan:4
[   70.552143] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   70.562285] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   70.563674] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   70.565631] Associated successfully
[   70.565638] normal associate
[   70.565668] Using G rates:108
[   70.565672] Successfully associated, ht not enabled(0, 0)
[   70.635499] ==========>received disassoc/deauth(c0) frame, reason code:7
[   70.635516] notify_wx_assoc_event(): Tell user space disconnected
[   70.635535] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   70.652137] rtllib_associate_procedure_wq(), chan:4
[   70.652146] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   70.662278] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   70.663602] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   70.665561] Associated successfully
[   70.665569] normal associate
[   70.665594] Using G rates:108
[   70.665601] Successfully associated, ht not enabled(0, 0)
[   70.737925] ==========>received disassoc/deauth(c0) frame, reason code:7
[   70.737943] notify_wx_assoc_event(): Tell user space disconnected
[   70.737963] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   70.756140] rtllib_associate_procedure_wq(), chan:4
[   70.756150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   70.766288] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   70.767630] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   70.769573] Associated successfully
[   70.769581] normal associate
[   70.769606] Using G rates:108
[   70.769610] Successfully associated, ht not enabled(0, 0)
[   70.840571] ==========>received disassoc/deauth(c0) frame, reason code:7
[   70.840590] notify_wx_assoc_event(): Tell user space disconnected
[   70.840610] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   70.860135] rtllib_associate_procedure_wq(), chan:4
[   70.860150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   70.870304] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   70.871787] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   70.874044] Associated successfully
[   70.874052] normal associate
[   70.874077] Using G rates:108
[   70.874084] Successfully associated, ht not enabled(0, 0)
[   70.942856] ==========>received disassoc/deauth(c0) frame, reason code:7
[   70.942877] notify_wx_assoc_event(): Tell user space disconnected
[   70.942896] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   70.961120] rtllib_associate_procedure_wq(), chan:4
[   70.961131] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   70.971265] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   70.972670] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   70.974645] Associated successfully
[   70.974652] normal associate
[   70.974679] Using G rates:108
[   70.974685] Successfully associated, ht not enabled(0, 0)
[   71.045154] ==========>received disassoc/deauth(c0) frame, reason code:7
[   71.045171] notify_wx_assoc_event(): Tell user space disconnected
[   71.045190] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   71.064141] rtllib_associate_procedure_wq(), chan:4
[   71.064151] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   71.074284] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   71.075643] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   71.077550] Associated successfully
[   71.077557] normal associate
[   71.077582] Using G rates:108
[   71.077594] Successfully associated, ht not enabled(0, 0)
[   71.147579] ==========>received disassoc/deauth(c0) frame, reason code:7
[   71.147595] notify_wx_assoc_event(): Tell user space disconnected
[   71.147615] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   71.165120] rtllib_associate_procedure_wq(), chan:4
[   71.165129] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   71.175269] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   71.176686] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   71.178655] Associated successfully
[   71.178662] normal associate
[   71.178686] Using G rates:108
[   71.178692] Successfully associated, ht not enabled(0, 0)
[   71.250153] ==========>received disassoc/deauth(c0) frame, reason code:7
[   71.250172] notify_wx_assoc_event(): Tell user space disconnected
[   71.250193] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   71.268142] rtllib_associate_procedure_wq(), chan:4
[   71.268152] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   71.278288] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   71.279832] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   71.282092] Associated successfully
[   71.282099] normal associate
[   71.282123] Using G rates:108
[   71.282134] Successfully associated, ht not enabled(0, 0)
[   71.352838] ==========>received disassoc/deauth(c0) frame, reason code:7
[   71.352858] notify_wx_assoc_event(): Tell user space disconnected
[   71.352882] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   71.372102] rtllib_associate_procedure_wq(), chan:4
[   71.372113] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   71.382259] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   71.383679] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   71.385661] Associated successfully
[   71.385668] normal associate
[   71.385695] Using G rates:108
[   71.385702] Successfully associated, ht not enabled(0, 0)
[   71.455261] ==========>received disassoc/deauth(c0) frame, reason code:7
[   71.455280] notify_wx_assoc_event(): Tell user space disconnected
[   71.455301] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   71.472143] rtllib_associate_procedure_wq(), chan:4
[   71.472153] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   71.482293] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   71.483653] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   71.485591] Associated successfully
[   71.485598] normal associate
[   71.485628] Using G rates:108
[   71.485632] Successfully associated, ht not enabled(0, 0)
[   71.557645] ==========>received disassoc/deauth(c0) frame, reason code:7
[   71.557662] notify_wx_assoc_event(): Tell user space disconnected
[   71.557683] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   71.576139] rtllib_associate_procedure_wq(), chan:4
[   71.576149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   71.586291] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   71.587721] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   71.589695] Associated successfully
[   71.589703] normal associate
[   71.589727] Using G rates:108
[   71.589734] Successfully associated, ht not enabled(0, 0)
[   71.659551] ==========>received disassoc/deauth(c0) frame, reason code:7
[   71.659568] notify_wx_assoc_event(): Tell user space disconnected
[   71.659590] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   71.676146] rtllib_associate_procedure_wq(), chan:4
[   71.676156] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   71.686290] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   71.687724] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   71.690091] Associated successfully
[   71.690098] normal associate
[   71.690124] Using G rates:108
[   71.690134] Successfully associated, ht not enabled(0, 0)
[   71.761881] ==========>received disassoc/deauth(c0) frame, reason code:7
[   71.761898] notify_wx_assoc_event(): Tell user space disconnected
[   71.761919] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   71.781734] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[   71.781798] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[   71.783056] gen_RefreshLedState first init
[   71.995839] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   71.995940] InitializeAdapter8190(): ????
[   72.096263] rtllib_associate_procedure_wq(), chan:4
[   72.096274] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   72.106408] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   72.107895] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   72.109861] Associated successfully
[   72.109868] normal associate
[   72.109894] Using G rates:108
[   72.109900] Successfully associated, ht not enabled(0, 0)
[   83.775314] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[   98.635971] ==========>received disassoc/deauth(c0) frame, reason code:7
[   98.635997] notify_wx_assoc_event(): Tell user space disconnected
[   98.636015] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   98.656079] rtllib_associate_procedure_wq(), chan:4
[   98.656088] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   98.666230] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   98.667581] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   98.669725] Associated successfully
[   98.669731] normal associate
[   98.669750] Using G rates:108
[   98.669754] Successfully associated, ht not enabled(0, 0)
[   98.737944] ==========>received disassoc/deauth(c0) frame, reason code:7
[   98.737970] notify_wx_assoc_event(): Tell user space disconnected
[   98.737988] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   98.757053] rtllib_associate_procedure_wq(), chan:4
[   98.757060] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   98.767192] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   98.768546] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   98.770444] Associated successfully
[   98.770452] normal associate
[   98.770479] Using G rates:108
[   98.770486] Successfully associated, ht not enabled(0, 0)
[   98.840231] ==========>received disassoc/deauth(c0) frame, reason code:7
[   98.840246] notify_wx_assoc_event(): Tell user space disconnected
[   98.840264] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   98.860057] rtllib_associate_procedure_wq(), chan:4
[   98.860064] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   98.870194] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   98.871570] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   98.873518] Associated successfully
[   98.873526] normal associate
[   98.873549] Using G rates:108
[   98.873554] Successfully associated, ht not enabled(0, 0)
[   98.942797] ==========>received disassoc/deauth(c0) frame, reason code:7
[   98.942817] notify_wx_assoc_event(): Tell user space disconnected
[   98.942832] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   98.961050] rtllib_associate_procedure_wq(), chan:4
[   98.961057] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   98.971189] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   98.972907] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   98.975251] Associated successfully
[   98.975259] normal associate
[   98.975282] Using G rates:108
[   98.975289] Successfully associated, ht not enabled(0, 0)
[   99.045132] ==========>received disassoc/deauth(c0) frame, reason code:7
[   99.045150] notify_wx_assoc_event(): Tell user space disconnected
[   99.045171] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   99.065081] rtllib_associate_procedure_wq(), chan:4
[   99.065090] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   99.075232] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   99.076575] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   99.078453] Associated successfully
[   99.078461] normal associate
[   99.078487] Using G rates:108
[   99.078493] Successfully associated, ht not enabled(0, 0)
[   99.147625] ==========>received disassoc/deauth(c0) frame, reason code:7
[   99.147645] notify_wx_assoc_event(): Tell user space disconnected
[   99.147666] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   99.164144] rtllib_associate_procedure_wq(), chan:4
[   99.164154] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   99.174294] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   99.175913] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   99.178329] Associated successfully
[   99.178336] normal associate
[   99.178362] Using G rates:108
[   99.178369] Successfully associated, ht not enabled(0, 0)
[   99.249964] ==========>received disassoc/deauth(c0) frame, reason code:7
[   99.249981] notify_wx_assoc_event(): Tell user space disconnected
[   99.250003] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   99.268138] rtllib_associate_procedure_wq(), chan:4
[   99.268147] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   99.278278] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   99.279693] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   99.281695] Associated successfully
[   99.281702] normal associate
[   99.281730] Using G rates:108
[   99.281734] Successfully associated, ht not enabled(0, 0)
[   99.352373] ==========>received disassoc/deauth(c0) frame, reason code:7
[   99.352389] notify_wx_assoc_event(): Tell user space disconnected
[   99.352408] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   99.372141] rtllib_associate_procedure_wq(), chan:4
[   99.372151] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   99.382282] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   99.383704] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   99.385655] Associated successfully
[   99.385662] normal associate
[   99.385691] Using G rates:108
[   99.385695] Successfully associated, ht not enabled(0, 0)
[   99.454725] ==========>received disassoc/deauth(c0) frame, reason code:7
[   99.454742] notify_wx_assoc_event(): Tell user space disconnected
[   99.454762] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   99.472137] rtllib_associate_procedure_wq(), chan:4
[   99.472147] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   99.482281] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   99.483723] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   99.485864] Associated successfully
[   99.485871] normal associate
[   99.485900] Using G rates:108
[   99.485904] Successfully associated, ht not enabled(0, 0)
[   99.557212] ==========>received disassoc/deauth(c0) frame, reason code:7
[   99.557229] notify_wx_assoc_event(): Tell user space disconnected
[   99.557248] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   99.576136] rtllib_associate_procedure_wq(), chan:4
[   99.576146] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   99.586280] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   99.588014] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   99.590355] Associated successfully
[   99.590362] normal associate
[   99.590390] Using G rates:108
[   99.590393] Successfully associated, ht not enabled(0, 0)
[   99.659598] ==========>received disassoc/deauth(c0) frame, reason code:7
[   99.659622] notify_wx_assoc_event(): Tell user space disconnected
[   99.659642] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   99.677146] rtllib_associate_procedure_wq(), chan:4
[   99.677158] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   99.687306] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[   99.688595] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   99.690846] Associated successfully
[   99.690853] normal associate
[   99.690879] Using G rates:108
[   99.690886] Successfully associated, ht not enabled(0, 0)
[   99.761908] ==========>received disassoc/deauth(c0) frame, reason code:7
[   99.761926] notify_wx_assoc_event(): Tell user space disconnected
[   99.761946] ===========>RemovePeerTS,00:22:a4:5c:28:59
[   99.782705] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[   99.782771] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[   99.784040] gen_RefreshLedState first init
[   99.996856] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   99.996955] InitializeAdapter8190(): ????
[  100.097347] rtllib_associate_procedure_wq(), chan:4
[  100.097358] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  100.107489] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  100.108880] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  100.110894] Associated successfully
[  100.110906] normal associate
[  100.110923] Using G rates:108
[  100.110927] Successfully associated, ht not enabled(0, 0)
[  105.774817] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  105.804583] ==========>received disassoc/deauth(c0) frame, reason code:7
[  105.804606] notify_wx_assoc_event(): Tell user space disconnected
[  105.804625] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  105.820131] rtllib_associate_procedure_wq(), chan:4
[  105.820142] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  105.830288] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  105.831603] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  105.833525] Associated successfully
[  105.833533] normal associate
[  105.833561] Using G rates:108
[  105.833567] Successfully associated, ht not enabled(0, 0)
[  105.906137] ==========>received disassoc/deauth(c0) frame, reason code:7
[  105.906158] notify_wx_assoc_event(): Tell user space disconnected
[  105.906180] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  105.924143] rtllib_associate_procedure_wq(), chan:4
[  105.924153] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  105.934294] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  105.935596] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  105.937574] Associated successfully
[  105.937581] normal associate
[  105.937609] Using G rates:108
[  105.937613] Successfully associated, ht not enabled(0, 0)
[  106.008511] ==========>received disassoc/deauth(c0) frame, reason code:7
[  106.008528] notify_wx_assoc_event(): Tell user space disconnected
[  106.008548] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  106.028139] rtllib_associate_procedure_wq(), chan:4
[  106.028149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  106.038281] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  106.039641] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  106.041620] Associated successfully
[  106.041627] normal associate
[  106.041650] Using G rates:108
[  106.041657] Successfully associated, ht not enabled(0, 0)
[  106.110902] ==========>received disassoc/deauth(c0) frame, reason code:7
[  106.110919] notify_wx_assoc_event(): Tell user space disconnected
[  106.110940] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  106.128139] rtllib_associate_procedure_wq(), chan:4
[  106.128149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  106.138290] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  106.139847] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  106.142028] Associated successfully
[  106.142035] normal associate
[  106.142063] Using G rates:108
[  106.142067] Successfully associated, ht not enabled(0, 0)
[  106.213308] ==========>received disassoc/deauth(c0) frame, reason code:7
[  106.213325] notify_wx_assoc_event(): Tell user space disconnected
[  106.213345] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  106.232140] rtllib_associate_procedure_wq(), chan:4
[  106.232149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  106.242282] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  106.243755] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  106.245657] Associated successfully
[  106.245664] normal associate
[  106.245689] Using G rates:108
[  106.245695] Successfully associated, ht not enabled(0, 0)
[  106.315709] ==========>received disassoc/deauth(c0) frame, reason code:7
[  106.315726] notify_wx_assoc_event(): Tell user space disconnected
[  106.315746] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  106.332140] rtllib_associate_procedure_wq(), chan:4
[  106.332149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  106.342282] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  106.343634] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  106.345609] Associated successfully
[  106.345616] normal associate
[  106.345641] Using G rates:108
[  106.345645] Successfully associated, ht not enabled(0, 0)
[  106.418082] ==========>received disassoc/deauth(c0) frame, reason code:7
[  106.418100] notify_wx_assoc_event(): Tell user space disconnected
[  106.418120] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  106.436139] rtllib_associate_procedure_wq(), chan:4
[  106.436149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  106.446291] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  106.447646] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  106.449616] Associated successfully
[  106.449623] normal associate
[  106.449648] Using G rates:108
[  106.449654] Successfully associated, ht not enabled(0, 0)
[  106.520501] ==========>received disassoc/deauth(c0) frame, reason code:7
[  106.520520] notify_wx_assoc_event(): Tell user space disconnected
[  106.520539] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  106.540139] rtllib_associate_procedure_wq(), chan:4
[  106.540148] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  106.550283] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  106.551756] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  106.554072] Associated successfully
[  106.554079] normal associate
[  106.554107] Using G rates:108
[  106.554111] Successfully associated, ht not enabled(0, 0)
[  106.622916] ==========>received disassoc/deauth(c0) frame, reason code:7
[  106.622933] notify_wx_assoc_event(): Tell user space disconnected
[  106.622953] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  106.640137] rtllib_associate_procedure_wq(), chan:4
[  106.640147] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  106.650287] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  106.651645] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  106.653606] Associated successfully
[  106.653613] normal associate
[  106.653636] Using G rates:108
[  106.653643] Successfully associated, ht not enabled(0, 0)
[  106.725327] ==========>received disassoc/deauth(c0) frame, reason code:7
[  106.725344] notify_wx_assoc_event(): Tell user space disconnected
[  106.725364] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  106.744138] rtllib_associate_procedure_wq(), chan:4
[  106.744147] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  106.754281] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  106.755702] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  106.757638] Associated successfully
[  106.757646] normal associate
[  106.757674] Using G rates:108
[  106.757678] Successfully associated, ht not enabled(0, 0)
[  106.827717] ==========>received disassoc/deauth(c0) frame, reason code:7
[  106.827739] notify_wx_assoc_event(): Tell user space disconnected
[  106.827759] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  106.844138] rtllib_associate_procedure_wq(), chan:4
[  106.844148] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  106.854283] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  106.855666] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  106.857583] Associated successfully
[  106.857591] normal associate
[  106.857615] Using G rates:108
[  106.857622] Successfully associated, ht not enabled(0, 0)
[  106.930112] ==========>received disassoc/deauth(c0) frame, reason code:7
[  106.930129] notify_wx_assoc_event(): Tell user space disconnected
[  106.930148] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  106.948140] rtllib_associate_procedure_wq(), chan:4
[  106.948150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  106.958282] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  106.959737] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  106.962089] Associated successfully
[  106.962097] normal associate
[  106.962125] Using G rates:108
[  106.962129] Successfully associated, ht not enabled(0, 0)
[  107.032641] ==========>received disassoc/deauth(c0) frame, reason code:7
[  107.032659] notify_wx_assoc_event(): Tell user space disconnected
[  107.032679] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  107.052137] rtllib_associate_procedure_wq(), chan:4
[  107.052147] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  107.062290] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  107.063589] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  107.065543] Associated successfully
[  107.065550] normal associate
[  107.065577] Using G rates:108
[  107.065580] Successfully associated, ht not enabled(0, 0)
[  107.135105] ==========>received disassoc/deauth(c0) frame, reason code:7
[  107.135122] notify_wx_assoc_event(): Tell user space disconnected
[  107.135140] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  107.152135] rtllib_associate_procedure_wq(), chan:4
[  107.152145] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  107.162278] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  107.163647] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  107.165586] Associated successfully
[  107.165593] normal associate
[  107.165621] Using G rates:108
[  107.165625] Successfully associated, ht not enabled(0, 0)
[  107.237610] ==========>received disassoc/deauth(c0) frame, reason code:7
[  107.237627] notify_wx_assoc_event(): Tell user space disconnected
[  107.237648] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  107.256136] rtllib_associate_procedure_wq(), chan:4
[  107.256145] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  107.266279] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  107.267607] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  107.269586] Associated successfully
[  107.269593] normal associate
[  107.269622] Using G rates:108
[  107.269626] Successfully associated, ht not enabled(0, 0)
[  107.340114] ==========>received disassoc/deauth(c0) frame, reason code:7
[  107.340132] notify_wx_assoc_event(): Tell user space disconnected
[  107.340153] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  107.360135] rtllib_associate_procedure_wq(), chan:4
[  107.360145] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  107.370278] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  107.371670] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  107.374009] Associated successfully
[  107.374016] normal associate
[  107.374039] Using G rates:108
[  107.374046] Successfully associated, ht not enabled(0, 0)
[  107.442655] ==========>received disassoc/deauth(c0) frame, reason code:7
[  107.442673] notify_wx_assoc_event(): Tell user space disconnected
[  107.442695] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  107.460141] rtllib_associate_procedure_wq(), chan:4
[  107.460151] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  107.470283] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  107.471710] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  107.473632] Associated successfully
[  107.473639] normal associate
[  107.473668] Using G rates:108
[  107.473672] Successfully associated, ht not enabled(0, 0)
[  107.544944] ==========>received disassoc/deauth(c0) frame, reason code:7
[  107.544961] notify_wx_assoc_event(): Tell user space disconnected
[  107.544980] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  107.564137] rtllib_associate_procedure_wq(), chan:4
[  107.564147] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  107.574277] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  107.575565] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  107.577516] Associated successfully
[  107.577523] normal associate
[  107.577547] Using G rates:108
[  107.577554] Successfully associated, ht not enabled(0, 0)
[  107.646897] ==========>received disassoc/deauth(c0) frame, reason code:7
[  107.646913] notify_wx_assoc_event(): Tell user space disconnected
[  107.646933] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  107.664138] rtllib_associate_procedure_wq(), chan:4
[  107.664147] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  107.674288] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  107.675756] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  107.677665] Associated successfully
[  107.677672] normal associate
[  107.677695] Using G rates:108
[  107.677699] Successfully associated, ht not enabled(0, 0)
[  107.749433] ==========>received disassoc/deauth(c0) frame, reason code:7
[  107.749452] notify_wx_assoc_event(): Tell user space disconnected
[  107.749474] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  107.768149] rtllib_associate_procedure_wq(), chan:4
[  107.768160] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  107.778326] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  107.778346] rtl8192CE:rtl8192_tx: ERR!! Nic is disabled! Can't tx packet len=30 qidx=6!!!
[  107.778352] 
[  108.298715] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  108.298781] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  108.300051] gen_RefreshLedState first init
[  108.513027] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  108.513128] InitializeAdapter8190(): ????
[  108.623205] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  108.623268] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  108.624570] gen_RefreshLedState first init
[  108.836437] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  108.836533] InitializeAdapter8190(): ????
[  108.938289] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  109.071477] r8169: eth0: link down
[  109.072189] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  114.063342] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  114.063413] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  114.064695] gen_RefreshLedState first init
[  114.277660] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  114.277761] InitializeAdapter8190(): ????
[  116.388096] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  116.388161] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  116.389434] gen_RefreshLedState first init
[  116.602376] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  116.602477] InitializeAdapter8190(): ????
[  116.704143] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  116.866745] r8169: eth0: link down
[  116.867268] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  116.945675] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  116.945741] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  116.947007] gen_RefreshLedState first init
[  117.159845] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  117.159946] InitializeAdapter8190(): ????
[  117.374590] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  117.374656] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  117.375925] gen_RefreshLedState first init
[  117.589008] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  117.589107] InitializeAdapter8190(): ????
[  117.690707] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  119.770471] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  119.770538] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  119.771822] gen_RefreshLedState first init
[  119.985236] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  119.985340] InitializeAdapter8190(): ????
[  120.085736] Linking with Me caga la vecina gritaperros,channel:4, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[  120.085828] rtllib_associate_procedure_wq(), chan:4
[  120.085836] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  120.095989] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  120.097575] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  120.099482] Associated successfully
[  120.099490] normal associate
[  120.099518] Using G rates:108
[  120.099524] Successfully associated, ht not enabled(0, 0)
[  120.100635] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  120.113855] notify_wx_assoc_event(): Tell user space disconnected
[  120.113901] Linking with Me caga la vecina gritaperros,channel:4, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[  120.113975] rtllib_associate_procedure_wq(), chan:4
[  120.113982] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  120.124129] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  120.126493] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  120.128713] Associated successfully
[  120.128721] normal associate
[  120.128743] Using G rates:108
[  120.128749] Successfully associated, ht not enabled(0, 0)
[  120.304476] DHCP pkt src port:68, dest port:67!!
[  120.649905] DHCP pkt src port:68, dest port:67!!
[  125.695037] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  130.888067] wlan0: no IPv6 routers present
[  218.012608] ==========>received disassoc/deauth(c0) frame, reason code:7
[  218.012631] notify_wx_assoc_event(): Tell user space disconnected
[  218.012649] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  218.032124] rtllib_associate_procedure_wq(), chan:4
[  218.032135] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  218.042280] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  218.043976] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  218.046481] Associated successfully
[  218.046489] normal associate
[  218.046515] Using G rates:108
[  218.046521] Successfully associated, ht not enabled(0, 0)
[  218.115025] ==========>received disassoc/deauth(c0) frame, reason code:7
[  218.115047] notify_wx_assoc_event(): Tell user space disconnected
[  218.115068] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  218.132139] rtllib_associate_procedure_wq(), chan:4
[  218.132149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  218.142283] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  218.143653] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  218.145560] Associated successfully
[  218.145568] normal associate
[  218.145592] Using G rates:108
[  218.145598] Successfully associated, ht not enabled(0, 0)
[  218.217434] ==========>received disassoc/deauth(c0) frame, reason code:7
[  218.217452] notify_wx_assoc_event(): Tell user space disconnected
[  218.217475] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  218.236142] rtllib_associate_procedure_wq(), chan:4
[  218.236152] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  218.246287] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  218.247641] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  218.249587] Associated successfully
[  218.249594] normal associate
[  218.249623] Using G rates:108
[  218.249627] Successfully associated, ht not enabled(0, 0)
[  218.319568] ==========>received disassoc/deauth(c0) frame, reason code:7
[  218.319588] notify_wx_assoc_event(): Tell user space disconnected
[  218.319609] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  218.336141] rtllib_associate_procedure_wq(), chan:4
[  218.336151] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  218.346287] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  218.347713] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  218.349979] Associated successfully
[  218.349986] normal associate
[  218.350011] Using G rates:108
[  218.350018] Successfully associated, ht not enabled(0, 0)
[  218.421883] ==========>received disassoc/deauth(c0) frame, reason code:7
[  218.421900] notify_wx_assoc_event(): Tell user space disconnected
[  218.421921] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  218.440141] rtllib_associate_procedure_wq(), chan:4
[  218.440150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  218.450284] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  218.451571] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  218.453545] Associated successfully
[  218.453552] normal associate
[  218.453575] Using G rates:108
[  218.453587] Successfully associated, ht not enabled(0, 0)
[  218.524278] ==========>received disassoc/deauth(c0) frame, reason code:7
[  218.524296] notify_wx_assoc_event(): Tell user space disconnected
[  218.524315] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  218.544138] rtllib_associate_procedure_wq(), chan:4
[  218.544149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  218.554291] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  218.555714] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  218.557581] Associated successfully
[  218.557588] normal associate
[  218.557611] Using G rates:108
[  218.557622] Successfully associated, ht not enabled(0, 0)
[  218.626743] ==========>received disassoc/deauth(c0) frame, reason code:7
[  218.626760] notify_wx_assoc_event(): Tell user space disconnected
[  218.626780] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  218.644141] rtllib_associate_procedure_wq(), chan:4
[  218.644150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  218.654287] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  218.655710] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  218.657605] Associated successfully
[  218.657612] normal associate
[  218.657636] Using G rates:108
[  218.657646] Successfully associated, ht not enabled(0, 0)
[  218.729027] ==========>received disassoc/deauth(c0) frame, reason code:7
[  218.729044] notify_wx_assoc_event(): Tell user space disconnected
[  218.729065] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  218.748131] rtllib_associate_procedure_wq(), chan:4
[  218.748141] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  218.758274] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  218.759598] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  218.761978] Associated successfully
[  218.761985] normal associate
[  218.762013] Using G rates:108
[  218.762017] Successfully associated, ht not enabled(0, 0)
[  218.831520] ==========>received disassoc/deauth(c0) frame, reason code:7
[  218.831539] notify_wx_assoc_event(): Tell user space disconnected
[  218.831560] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  218.848141] rtllib_associate_procedure_wq(), chan:4
[  218.848152] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  218.858292] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  218.859592] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  218.861543] Associated successfully
[  218.861550] normal associate
[  218.861580] Using G rates:108
[  218.861584] Successfully associated, ht not enabled(0, 0)
[  218.933941] ==========>received disassoc/deauth(c0) frame, reason code:7
[  218.933958] notify_wx_assoc_event(): Tell user space disconnected
[  218.933979] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  218.952139] rtllib_associate_procedure_wq(), chan:4
[  218.952149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  218.962280] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  218.963685] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  218.965603] Associated successfully
[  218.965611] normal associate
[  218.965638] Using G rates:108
[  218.965642] Successfully associated, ht not enabled(0, 0)
[  219.036395] ==========>received disassoc/deauth(c0) frame, reason code:7
[  219.036427] notify_wx_assoc_event(): Tell user space disconnected
[  219.036461] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  219.053065] rtllib_associate_procedure_wq(), chan:4
[  219.053077] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  219.063222] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  219.064599] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  219.066497] Associated successfully
[  219.066506] normal associate
[  219.066538] Using G rates:108
[  219.066547] Successfully associated, ht not enabled(0, 0)
[  219.138657] ==========>received disassoc/deauth(c0) frame, reason code:7
[  219.138677] notify_wx_assoc_event(): Tell user space disconnected
[  219.138698] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  219.156067] rtllib_associate_procedure_wq(), chan:4
[  219.156078] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  219.166212] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  219.167739] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  219.169902] Associated successfully
[  219.169910] normal associate
[  219.169934] Using G rates:108
[  219.169941] Successfully associated, ht not enabled(0, 0)
[  219.197727] DHCP pkt src port:68, dest port:67!!
[  219.285258] =====>rtl8192_hard_start_xmit() retrun :0:1:0
[  219.285281] notify_wx_assoc_event(): Tell user space disconnected
[  219.298232] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  219.298298] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  219.299557] gen_RefreshLedState first init
[  219.512389] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  219.512489] InitializeAdapter8190(): ????
[  219.613363] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  219.747448] r8169: eth0: link down
[  219.748173] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  225.065694] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  225.065761] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  225.067016] gen_RefreshLedState first init
[  225.279840] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  225.279942] InitializeAdapter8190(): ????
[  227.320766] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  227.320832] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  227.322168] gen_RefreshLedState first init
[  227.535130] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  227.535231] InitializeAdapter8190(): ????
[  227.636781] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  227.767908] r8169: eth0: link down
[  227.768558] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  227.850714] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  227.850780] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  227.852145] gen_RefreshLedState first init
[  228.065082] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  228.065184] InitializeAdapter8190(): ????
[  228.285187] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  228.285253] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  228.286511] gen_RefreshLedState first init
[  228.499385] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  228.499485] InitializeAdapter8190(): ????
[  228.600677] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  230.680151] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  230.680216] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  230.681510] gen_RefreshLedState first init
[  230.894421] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  230.894522] InitializeAdapter8190(): ????
[  230.994927] Linking with Me caga la vecina gritaperros,channel:4, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[  230.995022] rtllib_associate_procedure_wq(), chan:4
[  230.995034] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  231.005195] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  231.006702] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  231.008599] Associated successfully
[  231.008608] normal associate
[  231.008635] Using G rates:108
[  231.008641] Successfully associated, ht not enabled(0, 0)
[  231.009307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  231.012072] notify_wx_assoc_event(): Tell user space disconnected
[  231.012107] Linking with Me caga la vecina gritaperros,channel:4, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[  231.012213] rtllib_associate_procedure_wq(), chan:4
[  231.012218] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  231.022354] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  231.025654] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  231.027771] Associated successfully
[  231.027780] normal associate
[  231.027804] Using G rates:108
[  231.027809] Successfully associated, ht not enabled(0, 0)
[  233.306728] DHCP pkt src port:68, dest port:67!!
[  233.653488] DHCP pkt src port:68, dest port:67!!
[  236.602843] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  241.448037] wlan0: no IPv6 routers present
[  248.602919] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  268.602805] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  278.722801] ==========>received disassoc/deauth(c0) frame, reason code:7
[  278.722823] notify_wx_assoc_event(): Tell user space disconnected
[  278.722841] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  278.740125] rtllib_associate_procedure_wq(), chan:4
[  278.740136] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  278.750280] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  278.751661] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  278.753621] Associated successfully
[  278.753628] normal associate
[  278.753654] Using G rates:108
[  278.753661] Successfully associated, ht not enabled(0, 0)
[  278.824746] ==========>received disassoc/deauth(c0) frame, reason code:7
[  278.824768] notify_wx_assoc_event(): Tell user space disconnected
[  278.824788] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  278.844149] rtllib_associate_procedure_wq(), chan:4
[  278.844159] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  278.854302] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  278.855693] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  278.857643] Associated successfully
[  278.857650] normal associate
[  278.857674] Using G rates:108
[  278.857685] Successfully associated, ht not enabled(0, 0)
[  278.927075] ==========>received disassoc/deauth(c0) frame, reason code:7
[  278.927092] notify_wx_assoc_event(): Tell user space disconnected
[  278.927112] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  278.944142] rtllib_associate_procedure_wq(), chan:4
[  278.944153] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  278.954287] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  278.955798] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  278.957740] Associated successfully
[  278.957748] normal associate
[  278.957770] Using G rates:108
[  278.957781] Successfully associated, ht not enabled(0, 0)
[  279.029466] ==========>received disassoc/deauth(c0) frame, reason code:7
[  279.029483] notify_wx_assoc_event(): Tell user space disconnected
[  279.029504] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  279.048140] rtllib_associate_procedure_wq(), chan:4
[  279.048150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  279.058283] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  279.059933] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  279.062210] Associated successfully
[  279.062217] normal associate
[  279.062240] Using G rates:108
[  279.062246] Successfully associated, ht not enabled(0, 0)
[  279.132397] ==========>received disassoc/deauth(c0) frame, reason code:7
[  279.132414] notify_wx_assoc_event(): Tell user space disconnected
[  279.132434] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  279.152144] rtllib_associate_procedure_wq(), chan:4
[  279.152153] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  279.162288] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  279.163628] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  279.165542] Associated successfully
[  279.165549] normal associate
[  279.165573] Using G rates:108
[  279.165580] Successfully associated, ht not enabled(0, 0)
[  279.234279] ==========>received disassoc/deauth(c0) frame, reason code:7
[  279.234296] notify_wx_assoc_event(): Tell user space disconnected
[  279.234315] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  279.252142] rtllib_associate_procedure_wq(), chan:4
[  279.252152] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  279.262286] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  279.263572] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  279.265541] Associated successfully
[  279.265548] normal associate
[  279.265571] Using G rates:108
[  279.265582] Successfully associated, ht not enabled(0, 0)
[  279.336673] ==========>received disassoc/deauth(c0) frame, reason code:7
[  279.336690] notify_wx_assoc_event(): Tell user space disconnected
[  279.336710] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  279.356139] rtllib_associate_procedure_wq(), chan:4
[  279.356150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  279.366283] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  279.367701] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  279.369800] Associated successfully
[  279.369808] normal associate
[  279.369831] Using G rates:108
[  279.369838] Successfully associated, ht not enabled(0, 0)
[  279.439083] ==========>received disassoc/deauth(c0) frame, reason code:7
[  279.439101] notify_wx_assoc_event(): Tell user space disconnected
[  279.439119] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  279.456139] rtllib_associate_procedure_wq(), chan:4
[  279.456148] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  279.466279] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  279.467861] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  279.470229] Associated successfully
[  279.470237] normal associate
[  279.470261] Using G rates:108
[  279.470265] Successfully associated, ht not enabled(0, 0)
[  279.541413] ==========>received disassoc/deauth(c0) frame, reason code:7
[  279.541431] notify_wx_assoc_event(): Tell user space disconnected
[  279.541450] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  279.560149] rtllib_associate_procedure_wq(), chan:4
[  279.560159] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  279.570300] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  279.572593] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  279.574581] Associated successfully
[  279.574588] normal associate
[  279.574614] Using G rates:108
[  279.574621] Successfully associated, ht not enabled(0, 0)
[  279.643940] ==========>received disassoc/deauth(c0) frame, reason code:7
[  279.643959] notify_wx_assoc_event(): Tell user space disconnected
[  279.643979] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  279.660142] rtllib_associate_procedure_wq(), chan:4
[  279.660152] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  279.670287] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  279.671636] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  279.673540] Associated successfully
[  279.673547] normal associate
[  279.673569] Using G rates:108
[  279.673576] Successfully associated, ht not enabled(0, 0)
[  279.746350] ==========>received disassoc/deauth(c0) frame, reason code:7
[  279.746371] notify_wx_assoc_event(): Tell user space disconnected
[  279.746391] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  279.764139] rtllib_associate_procedure_wq(), chan:4
[  279.764149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  279.774281] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  279.775701] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  279.777889] Associated successfully
[  279.777896] normal associate
[  279.777919] Using G rates:108
[  279.777926] Successfully associated, ht not enabled(0, 0)
[  279.848681] ==========>received disassoc/deauth(c0) frame, reason code:7
[  279.848698] notify_wx_assoc_event(): Tell user space disconnected
[  279.848717] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  279.868141] rtllib_associate_procedure_wq(), chan:4
[  279.868150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  279.878282] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  279.880077] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  279.882162] Associated successfully
[  279.882169] normal associate
[  279.882198] Using G rates:108
[  279.882202] Successfully associated, ht not enabled(0, 0)
[  279.951129] ==========>received disassoc/deauth(c0) frame, reason code:7
[  279.951145] notify_wx_assoc_event(): Tell user space disconnected
[  279.951165] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  279.968139] rtllib_associate_procedure_wq(), chan:4
[  279.968149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  279.978280] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  279.979719] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  279.981627] Associated successfully
[  279.981635] normal associate
[  279.981658] Using G rates:108
[  279.981664] Successfully associated, ht not enabled(0, 0)
[  280.053497] ==========>received disassoc/deauth(c0) frame, reason code:7
[  280.053515] notify_wx_assoc_event(): Tell user space disconnected
[  280.053533] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  280.072141] rtllib_associate_procedure_wq(), chan:4
[  280.072150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  280.082280] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  280.083704] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  280.085652] Associated successfully
[  280.085659] normal associate
[  280.085684] Using G rates:108
[  280.085688] Successfully associated, ht not enabled(0, 0)
[  280.155964] ==========>received disassoc/deauth(c0) frame, reason code:7
[  280.155981] notify_wx_assoc_event(): Tell user space disconnected
[  280.156001] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  280.172136] rtllib_associate_procedure_wq(), chan:4
[  280.172146] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  280.182280] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  280.183608] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  280.185912] Associated successfully
[  280.185919] normal associate
[  280.185944] Using G rates:108
[  280.185951] Successfully associated, ht not enabled(0, 0)
[  280.258310] ==========>received disassoc/deauth(c0) frame, reason code:7
[  280.258329] notify_wx_assoc_event(): Tell user space disconnected
[  280.258348] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  280.276145] rtllib_associate_procedure_wq(), chan:4
[  280.276155] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  280.286286] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  280.288130] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  280.290115] Associated successfully
[  280.290122] normal associate
[  280.290152] Using G rates:108
[  280.290156] Successfully associated, ht not enabled(0, 0)
[  280.360791] ==========>received disassoc/deauth(c0) frame, reason code:7
[  280.360808] notify_wx_assoc_event(): Tell user space disconnected
[  280.360828] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  280.380143] rtllib_associate_procedure_wq(), chan:4
[  280.380153] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  280.390284] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  280.391700] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  280.393647] Associated successfully
[  280.393654] normal associate
[  280.393679] Using G rates:108
[  280.393683] Successfully associated, ht not enabled(0, 0)
[  280.463249] ==========>received disassoc/deauth(c0) frame, reason code:7
[  280.463266] notify_wx_assoc_event(): Tell user space disconnected
[  280.463286] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  280.480142] rtllib_associate_procedure_wq(), chan:4
[  280.480152] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  280.490290] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  280.491641] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  280.493604] Associated successfully
[  280.493611] normal associate
[  280.493635] Using G rates:108
[  280.493639] Successfully associated, ht not enabled(0, 0)
[  280.565791] ==========>received disassoc/deauth(c0) frame, reason code:7
[  280.565809] notify_wx_assoc_event(): Tell user space disconnected
[  280.565829] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  280.584144] rtllib_associate_procedure_wq(), chan:4
[  280.584154] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  280.594285] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  280.595627] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  280.597568] Associated successfully
[  280.597575] normal associate
[  280.597603] Using G rates:108
[  280.597607] Successfully associated, ht not enabled(0, 0)
[  286.603042] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  286.607423] ==========>received disassoc/deauth(c0) frame, reason code:7
[  286.607446] notify_wx_assoc_event(): Tell user space disconnected
[  286.607464] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  286.628119] rtllib_associate_procedure_wq(), chan:4
[  286.628131] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  286.638272] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  286.639583] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  286.641544] Associated successfully
[  286.641551] normal associate
[  286.641579] Using G rates:108
[  286.641585] Successfully associated, ht not enabled(0, 0)
[  286.709719] ==========>received disassoc/deauth(c0) frame, reason code:7
[  286.709740] notify_wx_assoc_event(): Tell user space disconnected
[  286.709763] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  286.728142] rtllib_associate_procedure_wq(), chan:4
[  286.728152] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  286.738292] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  286.739661] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  286.741598] Associated successfully
[  286.741606] normal associate
[  286.741629] Using G rates:108
[  286.741633] Successfully associated, ht not enabled(0, 0)
[  286.812041] ==========>received disassoc/deauth(c0) frame, reason code:7
[  286.812058] notify_wx_assoc_event(): Tell user space disconnected
[  286.812078] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  286.832139] rtllib_associate_procedure_wq(), chan:4
[  286.832149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  286.842280] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  286.843737] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  286.845848] Associated successfully
[  286.845856] normal associate
[  286.845879] Using G rates:108
[  286.845885] Successfully associated, ht not enabled(0, 0)
[  286.914402] ==========>received disassoc/deauth(c0) frame, reason code:7
[  286.914419] notify_wx_assoc_event(): Tell user space disconnected
[  286.914438] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  286.932141] rtllib_associate_procedure_wq(), chan:4
[  286.932150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  286.942280] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  286.943927] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  286.946411] Associated successfully
[  286.946419] normal associate
[  286.946444] Using G rates:108
[  286.946450] Successfully associated, ht not enabled(0, 0)
[  287.017013] ==========>received disassoc/deauth(c0) frame, reason code:7
[  287.017031] notify_wx_assoc_event(): Tell user space disconnected
[  287.017050] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  287.036139] rtllib_associate_procedure_wq(), chan:4
[  287.036149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  287.046280] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  287.047647] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  287.049654] Associated successfully
[  287.049661] normal associate
[  287.049684] Using G rates:108
[  287.049690] Successfully associated, ht not enabled(0, 0)
[  287.119444] ==========>received disassoc/deauth(c0) frame, reason code:7
[  287.119463] notify_wx_assoc_event(): Tell user space disconnected
[  287.119485] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  287.136142] rtllib_associate_procedure_wq(), chan:4
[  287.136153] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  287.146295] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  287.147617] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  287.149507] Associated successfully
[  287.149515] normal associate
[  287.149539] Using G rates:108
[  287.149551] Successfully associated, ht not enabled(0, 0)
[  287.221981] ==========>received disassoc/deauth(c0) frame, reason code:7
[  287.221999] notify_wx_assoc_event(): Tell user space disconnected
[  287.222019] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  287.240153] rtllib_associate_procedure_wq(), chan:4
[  287.240164] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  287.250306] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  287.251713] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  287.253832] Associated successfully
[  287.253839] normal associate
[  287.253864] Using G rates:108
[  287.253871] Successfully associated, ht not enabled(0, 0)
[  287.324569] ==========>received disassoc/deauth(c0) frame, reason code:7
[  287.324587] notify_wx_assoc_event(): Tell user space disconnected
[  287.324609] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  287.344142] rtllib_associate_procedure_wq(), chan:4
[  287.344152] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  287.354284] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  287.355927] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  287.358341] Associated successfully
[  287.358349] normal associate
[  287.358374] Using G rates:108
[  287.358378] Successfully associated, ht not enabled(0, 0)
[  287.426983] ==========>received disassoc/deauth(c0) frame, reason code:7
[  287.427001] notify_wx_assoc_event(): Tell user space disconnected
[  287.427020] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  287.444139] rtllib_associate_procedure_wq(), chan:4
[  287.444149] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  287.454280] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  287.455639] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  287.457571] Associated successfully
[  287.457578] normal associate
[  287.457601] Using G rates:108
[  287.457608] Successfully associated, ht not enabled(0, 0)
[  287.528820] ==========>received disassoc/deauth(c0) frame, reason code:7
[  287.528838] notify_wx_assoc_event(): Tell user space disconnected
[  287.528857] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  287.548132] rtllib_associate_procedure_wq(), chan:4
[  287.548141] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  287.558274] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  287.559631] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  287.561539] Associated successfully
[  287.561546] normal associate
[  287.561575] Using G rates:108
[  287.561579] Successfully associated, ht not enabled(0, 0)
[  287.631319] ==========>received disassoc/deauth(c0) frame, reason code:7
[  287.631340] notify_wx_assoc_event(): Tell user space disconnected
[  287.631361] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  287.648141] rtllib_associate_procedure_wq(), chan:4
[  287.648151] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  287.658286] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  287.659568] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  287.661881] Associated successfully
[  287.661889] normal associate
[  287.661911] Using G rates:108
[  287.661918] Successfully associated, ht not enabled(0, 0)
[  287.733708] ==========>received disassoc/deauth(c0) frame, reason code:7
[  287.733726] notify_wx_assoc_event(): Tell user space disconnected
[  287.733746] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  287.752134] rtllib_associate_procedure_wq(), chan:4
[  287.752144] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  287.762282] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  287.764001] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  287.766245] Associated successfully
[  287.766252] normal associate
[  287.766280] Using G rates:108
[  287.766284] Successfully associated, ht not enabled(0, 0)
[  287.836012] ==========>received disassoc/deauth(c0) frame, reason code:7
[  287.836030] notify_wx_assoc_event(): Tell user space disconnected
[  287.836050] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  287.852143] rtllib_associate_procedure_wq(), chan:4
[  287.852153] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  287.862298] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  287.863694] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  287.865628] Associated successfully
[  287.865639] normal associate
[  287.865671] Using G rates:108
[  287.865681] Successfully associated, ht not enabled(0, 0)
[  287.938480] ==========>received disassoc/deauth(c0) frame, reason code:7
[  287.938499] notify_wx_assoc_event(): Tell user space disconnected
[  287.938521] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  287.956140] rtllib_associate_procedure_wq(), chan:4
[  287.956150] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  287.966290] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  287.967621] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  287.969565] Associated successfully
[  287.969572] normal associate
[  287.969601] Using G rates:108
[  287.969605] Successfully associated, ht not enabled(0, 0)
[  288.040857] ==========>received disassoc/deauth(c0) frame, reason code:7
[  288.040892] notify_wx_assoc_event(): Tell user space disconnected
[  288.040927] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  288.061078] rtllib_associate_procedure_wq(), chan:4
[  288.061092] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  288.071248] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  288.072550] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  288.075494] Associated successfully
[  288.075501] normal associate
[  288.075523] Using G rates:108
[  288.075527] Successfully associated, ht not enabled(0, 0)
[  288.143146] ==========>received disassoc/deauth(c0) frame, reason code:7
[  288.143166] notify_wx_assoc_event(): Tell user space disconnected
[  288.143187] ===========>RemovePeerTS,00:22:a4:5c:28:59
[  288.161062] rtllib_associate_procedure_wq(), chan:4
[  288.161073] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  288.171216] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  288.171622] DHCP pkt src port:68, dest port:67!!
[  288.176137] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  288.179128] Associated successfully
[  288.179140] normal associate
[  288.179173] Using G rates:108
[  288.179183] Successfully associated, ht not enabled(0, 0)
[  288.261215] =====>rtl8192_hard_start_xmit() retrun :0:1:0
[  288.261238] notify_wx_assoc_event(): Tell user space disconnected
[  288.273899] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  288.273965] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  288.275223] gen_RefreshLedState first init
[  288.487986] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  288.488127] InitializeAdapter8190(): ????
[  288.589161] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  288.723509] r8169: eth0: link down
[  288.724268] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  294.065323] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  294.065390] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  294.066646] gen_RefreshLedState first init
[  294.279427] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  294.279527] InitializeAdapter8190(): ????
[  296.308694] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  296.308759] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  296.310078] gen_RefreshLedState first init
[  296.522832] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  296.522932] InitializeAdapter8190(): ????
[  296.624059] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  296.756611] r8169: eth0: link down
[  296.757413] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  296.833728] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  296.833793] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  296.835053] gen_RefreshLedState first init
[  297.047828] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  297.047927] InitializeAdapter8190(): ????
[  297.240474] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  297.240537] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  297.241842] gen_RefreshLedState first init
[  297.454539] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  297.454634] InitializeAdapter8190(): ????
[  297.555351] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  299.631022] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:11
[  299.631087] ################>rtl8192ce_InitMAC()Reg0xEC:98053f15:10
[  299.632412] gen_RefreshLedState first init
[  299.845184] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  299.845284] InitializeAdapter8190(): ????
[  299.945450] Linking with Me caga la vecina gritaperros,channel:4, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[  299.945541] rtllib_associate_procedure_wq(), chan:4
[  299.945553] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  299.955706] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  299.957104] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  299.959231] Associated successfully
[  299.959240] normal associate
[  299.959269] Using G rates:108
[  299.959275] Successfully associated, ht not enabled(0, 0)
[  299.959942] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  299.962425] notify_wx_assoc_event(): Tell user space disconnected
[  299.962507] Linking with Me caga la vecina gritaperros,channel:4, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[  299.962606] rtllib_associate_procedure_wq(), chan:4
[  299.962611] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  299.972748] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode is 0,ieee->qos_capability is 1
[  299.974752] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  299.978588] Associated successfully
[  299.978597] normal associate
[  299.978620] Using G rates:108
[  299.978625] Successfully associated, ht not enabled(0, 0)
[  301.305690] DHCP pkt src port:68, dest port:67!!
[  301.653391] DHCP pkt src port:68, dest port:67!!
[  305.559043] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[  310.540059] wlan0: no IPv6 routers present
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
	Subsystem: Dell Device 048e
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (prog-if 00 [VGA controller])
	Subsystem: Dell Device 048e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at f0200000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at 18d0 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at f0000000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
	Subsystem: Dell Device 048e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f0280000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
	Subsystem: Dell Device 048e
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at f0300000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 40000000-403fffff
	Prefetchable memory behind bridge: 00000000f0f00000-00000000f0ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f0100000-f01fffff
	Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device 048e
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at 1820 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device 048e
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 1840 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device 048e
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 1860 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device 048e
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at 1880 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device 048e
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f0504000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=11, subordinate=11, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
	Subsystem: Dell Device 048e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: Dell Device 048e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 27
	Region 0: I/O ports at 18e8 [size=8]
	Region 1: I/O ports at 18dc [size=4]
	Region 2: I/O ports at 18e0 [size=8]
	Region 3: I/O ports at 18d8 [size=4]
	Region 4: I/O ports at 18c0 [size=16]
	Region 5: Memory at f0504400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
	Subsystem: Dell Device 048e
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 18a0 [size=32]
	Kernel driver in use: i801_smbus

05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
	Subsystem: Dell Device 048e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 26
	Region 0: I/O ports at 2000 [size=256]
	Region 2: Memory at f0f2c000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at f0f18000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
	Subsystem: Dell Device 8198
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 3000 [size=256]
	Region 2: Memory at f0100000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: rtl8192CE


--- End Message ---
--- Begin Message ---
Source: firmware-nonfree
Source-Version: 0.30

We believe that the bug you reported is fixed in the latest version of
firmware-nonfree, which is due to be installed in the Debian FTP archive:

firmware-atheros_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-atheros_0.30_all.deb
firmware-bnx2_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-bnx2_0.30_all.deb
firmware-bnx2x_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-bnx2x_0.30_all.deb
firmware-brcm80211_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-brcm80211_0.30_all.deb
firmware-intelwimax_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-intelwimax_0.30_all.deb
firmware-ipw2x00_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-ipw2x00_0.30_all.deb
firmware-ivtv_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-ivtv_0.30_all.deb
firmware-iwlwifi_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-iwlwifi_0.30_all.deb
firmware-linux-nonfree_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-linux-nonfree_0.30_all.deb
firmware-linux_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-linux_0.30_all.deb
firmware-netxen_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-netxen_0.30_all.deb
firmware-nonfree_0.30.dsc
  to non-free/f/firmware-nonfree/firmware-nonfree_0.30.dsc
firmware-nonfree_0.30.tar.gz
  to non-free/f/firmware-nonfree/firmware-nonfree_0.30.tar.gz
firmware-qlogic_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-qlogic_0.30_all.deb
firmware-ralink_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-ralink_0.30_all.deb
firmware-realtek_0.30_all.deb
  to non-free/f/firmware-nonfree/firmware-realtek_0.30_all.deb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 613536@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Ben Hutchings <ben@decadent.org.uk> (supplier of updated firmware-nonfree package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Wed, 18 May 2011 05:19:49 +0100
Source: firmware-nonfree
Binary: firmware-linux firmware-atheros firmware-bnx2 firmware-bnx2x firmware-brcm80211 firmware-intelwimax firmware-ipw2x00 firmware-ivtv firmware-iwlwifi firmware-linux-nonfree firmware-netxen firmware-qlogic firmware-ralink firmware-realtek
Architecture: source all
Version: 0.30
Distribution: unstable
Urgency: low
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Ben Hutchings <ben@decadent.org.uk>
Description: 
 firmware-atheros - Binary firmware for Atheros wireless cards
 firmware-bnx2 - Binary firmware for Broadcom NetXtremeII
 firmware-bnx2x - Binary firmware for Broadcom NetXtreme II 10Gb
 firmware-brcm80211 - Binary firmware for Broadcom 802.11 wireless cards
 firmware-intelwimax - Binary firmware for Intel WiMAX Connection
 firmware-ipw2x00 - Binary firmware for Intel Pro Wireless 2100, 2200 and 2915
 firmware-ivtv - Binary firmware for iTVC15-family MPEG codecs (ivtv and pvrusb2 d
 firmware-iwlwifi - Binary firmware for Intel Wireless 3945, 4965 and 5000-series car
 firmware-linux - Binary firmware for various drivers in the Linux kernel (meta-pac
 firmware-linux-nonfree - Binary firmware for various drivers in the Linux kernel
 firmware-netxen - Binary firmware for QLogic Intelligent Ethernet (3000 and 3100 Se
 firmware-qlogic - Binary firmware for QLogic IBA7220, QLA1xxx, ISP2xxx and SP2x2
 firmware-ralink - Binary firmware for Ralink wireless cards
 firmware-realtek - Binary firmware for Realtek wired and wireless network adapters
Closes: 601416 613536 616017 617645 620171 625614
Changes: 
 firmware-nonfree (0.30) unstable; urgency=low
 .
   [ Ben Hutchings ]
   * Update to linux-support-2.6.38-2 (Closes: #620171)
   * Make firmware-realtek trigger update-initramfs (Closes: #617645)
   * Correct list of chips supported by brcm80211, thanks to Jani Reunanen
   * Update Ralink RT2800-family firmware (Closes: #601416):
     - Update firmware for RT2860 and other PCI and PCIe chips to version 34
     - Update firmware for RT2870 and other USB chips to version 29
       (Closes: #616017)
   * Add firmware for HTC devices using Atheros AR7010 and AR9271
   * Add new version of bnx2 firmware from Linux 2.6.39
   * Remove bnx2 firmware not referenced by Linux 2.6.32, 2.6.38 or 2.6.39
   * Update brcm80211 firmware to version 610.811
     - Unspecified stability fixes
   * Add Realtek RTL8192CU/RTL8188CU firmware for use with rtl8192cu,
     thanks to Geoff Simmons (Closes: #625614)
   * Add Realtek RTL8192CE/RTL8188CE firmware for use with rtl8192ce
     (Closes: #613536)
   * Add Realtek RTL8105E-1 and RTL8168E-1/2/3 firmware for use with r8169
 .
   [ dann frazier ]
   * Update netxen firmware to 4.0.550
Checksums-Sha1: 
 f925356eb39090b02b7fd2dfc68c3f6b63a3d724 2015 firmware-nonfree_0.30.dsc
 23c8121be03a1693c43fa438263556c1e1cc618b 10993848 firmware-nonfree_0.30.tar.gz
 0ed2b3926632658e607c3e07de31d2136b3c3ee6 6498 firmware-linux_0.30_all.deb
 6e6f3766353ce5513cf9f3fc4417e1aa45af3013 355444 firmware-atheros_0.30_all.deb
 616b2e6fa9ca6c4bcc186dd1361c1d0f792655da 267454 firmware-bnx2_0.30_all.deb
 cac3bfac55b425723e31d7a8691d2c8b01a8a49c 1230194 firmware-bnx2x_0.30_all.deb
 ef295fe3abe1e4f85a88e6facc07c862a4686abc 54254 firmware-brcm80211_0.30_all.deb
 f569ea433e78be2c5095c0cfa83d94915da5d9a4 2352788 firmware-intelwimax_0.30_all.deb
 4adfde3f45db5797640dc3962285874114445b75 522292 firmware-ipw2x00_0.30_all.deb
 3cc98eb496656249f4da51df59b57358b5eddf1f 136784 firmware-ivtv_0.30_all.deb
 000d5cd1826ea08ffe379bf08d92a81184a66954 2428512 firmware-iwlwifi_0.30_all.deb
 336e55ee397addbc0da991a4f42e20a484868c46 369872 firmware-linux-nonfree_0.30_all.deb
 335fae14a8933758480983505fdab191e4188afd 1384312 firmware-netxen_0.30_all.deb
 c78fb547ceba75651a7f3a3dc36fe6545ba1d5f3 480122 firmware-qlogic_0.30_all.deb
 2e7574bccf82af0bcb4f1e213f7f489591b754d1 20020 firmware-ralink_0.30_all.deb
 23958a4a95b29b00aec9870052d69ebc4664a80e 147258 firmware-realtek_0.30_all.deb
Checksums-Sha256: 
 2792d70a7f8e971311fd7fa484c84ebdb118de0f6e123e3fb440a2f78b300d18 2015 firmware-nonfree_0.30.dsc
 35215a7d12f3e7873eaf75395dfaf070675009216f9adf0ea24f2d4f86356854 10993848 firmware-nonfree_0.30.tar.gz
 c6fb2e07d1fd0cdb18c6762a46b64e0f52b67c38160a2cbaeb301522e101bb98 6498 firmware-linux_0.30_all.deb
 0383f4fbbf12e41d0349badaee8aea94ed9405e035d32e87ce281d961b71ea8a 355444 firmware-atheros_0.30_all.deb
 b69d5164219de20fae5ef0afa6d1093e1b9bfae1007dbb20b6bdc02a9a07259d 267454 firmware-bnx2_0.30_all.deb
 c5c1bb2400236ab676f69c57c8cedd5ffc807c2f28a276904b36ba4eb7d2ba25 1230194 firmware-bnx2x_0.30_all.deb
 b1b5b6c06200afc85971775b50df71f3d4784ef66d86545770b3afbb84d96f3f 54254 firmware-brcm80211_0.30_all.deb
 437b1ffd46e496c5b771ae15a591a8c9be318d2babaa55233e14e46ea61a5a22 2352788 firmware-intelwimax_0.30_all.deb
 45b0b8348a721dfe517be33b6c975f5f5bf3bfe541097b27cc5fa650dc7c13ce 522292 firmware-ipw2x00_0.30_all.deb
 369fbc83ec298b14e68acb87bd5fa0681b907bc6ec4cd2f7f7d443321d38f6df 136784 firmware-ivtv_0.30_all.deb
 cfa432fcd6c86f17a53ab31d928a72826e4f44d445480468619515c19e41578f 2428512 firmware-iwlwifi_0.30_all.deb
 d4b534c92fb5dd666e7538d2bbd7e9cb0efd746ac93f9efb79c28c3c9955b2c0 369872 firmware-linux-nonfree_0.30_all.deb
 7be29fca915f223905f42cf4412607173ce119f07bfb87eb2d5ecd1bdcda2c6d 1384312 firmware-netxen_0.30_all.deb
 0e0ab8638e47456e35e2b9fae7b5572e72f6387af5f7e57776c85a2f8eecf62e 480122 firmware-qlogic_0.30_all.deb
 3105e7f84360b17a94543567bde47b340961af49a3160a20302b79013e162996 20020 firmware-ralink_0.30_all.deb
 2cee8805e07e9f067ee7f694183d3c2cb2b2ef0a41f96aaf82b156bf03710c43 147258 firmware-realtek_0.30_all.deb
Files: 
 61c6d4c242de55d7e515dc74c234b62e 2015 non-free/kernel optional firmware-nonfree_0.30.dsc
 a5efd4fe502d152ca39a46403df6eda7 10993848 non-free/kernel optional firmware-nonfree_0.30.tar.gz
 fb5bfef605dcadf60bbaf776c527ef08 6498 non-free/kernel optional firmware-linux_0.30_all.deb
 91c4e75ae913e73a2ff977a267073b30 355444 non-free/kernel optional firmware-atheros_0.30_all.deb
 ce279a641859984fb48429e33c62a441 267454 non-free/kernel optional firmware-bnx2_0.30_all.deb
 4f74d4b0612205f12a285aa771f92b89 1230194 non-free/kernel optional firmware-bnx2x_0.30_all.deb
 630ed9c9fb5be0febb0d1b2dac6608c7 54254 non-free/kernel optional firmware-brcm80211_0.30_all.deb
 bb2316f4c66eb8304aed7e46d5dafa9b 2352788 non-free/kernel optional firmware-intelwimax_0.30_all.deb
 92cd9c80176d61dfc422a642144e9ded 522292 non-free/kernel optional firmware-ipw2x00_0.30_all.deb
 50447e03e9904b54af18d47485b749ff 136784 non-free/kernel optional firmware-ivtv_0.30_all.deb
 70f198b68f879a980c9ae36eb5f0aa59 2428512 non-free/kernel optional firmware-iwlwifi_0.30_all.deb
 c9c5436adb152671b0669c0d1af47198 369872 non-free/kernel optional firmware-linux-nonfree_0.30_all.deb
 d01a27278946cbf429dabbf7f29f50b5 1384312 non-free/kernel optional firmware-netxen_0.30_all.deb
 e4eef99fb26652457bee254ec69b28d4 480122 non-free/kernel optional firmware-qlogic_0.30_all.deb
 bc91c0f9b390c3ce756aaaa77e0809df 20020 non-free/kernel optional firmware-ralink_0.30_all.deb
 2605b49d604fe054c586f1b182889f96 147258 non-free/kernel optional firmware-realtek_0.30_all.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
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=mgpm
-----END PGP SIGNATURE-----



--- End Message ---

Reply to: