[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#626851: linux-image-2.6.38-2-amd64: after last update fails to boot

tags 626851 - moreinfo
quit

(cc-ing the bug log)
Rares Aioanei wrote:

> I used the exact sequence of commands in building the working kernel and the
> non-working kernel; and yes, the disk driver is , of course, 'y', not built
> as a module. Was there a change in the config file in this last update?

That's possible, but more likely the bug is in some specific driver
that the working kernel does not use (or something like that).

Thanks for the info.  The reason for asking about built-in disk
drivers is that the Debian kernel installs many drivers like that as
modules that get loaded in the initramfs.  One way to track this down
might be to adapt chunks of the .config to more closely resemble the
Debian kernel until it fails, and then pare it down until it succeeds
again.  Others may have better ideas.

Regards,
Jonathan
--- Begin Message --- 
On Tue, 17 May 2011 05:11:34 -0500
Jonathan Nieder <jrnieder@gmail.com> wrote:

> tags 626851 + upstream moreinfo
> quit
> 
> Hi,
> 
> Rares Aioanei wrote:
> 
> > Loading, please wait...
> > /scripts/local-premount/resume : line 63 : /bin/resume : not found
> > mount : mounting /dev/disk-by-uuid/<uuid here> on /root failed : no such file or directory
> [...]
> > The error described can be also seen if compiling a vanilla kernel with
> > the exact config as the Debian one (in my case 2.6.38.6) . I'm writing this
> > from the same machine running 2.6.38.4 with a custom config and it works
> > fine. Hope it helps.
> 
> Could you attach a dmesg from the working configuration and the two .config
> files for comparison?  What commands do you use to build and install a
> custom kernel?  Does the custom configuration build in the disk driver
> (i.e., Y instead of M), and does it use an initramfs?
> 
> Thanks for writing,
> Jonathan

Attached is the dmesg, also the .configs, the commands are : 
1.cp /boot/config<version> ./.config (obviously, in the root dir of the kernel source.)
2.make menuconfig and load config file -> .config
3.make -j3 all
4.sudo make modules_install
5.sudo make install 
6.sudo depmod
7.sudo update-initramfs -c -k <vresion>
8.sudo update-grub

I used the exact sequence of commands in building the working kernel and the non-working kernel; and yes, the disk driver is , of course, 'y', not built as a module. Was there a change in the config file in this last update?

Thanks, 

-- 
Rares Aioanei

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38.4 (arares@debiand1) (gcc version 4.5.2 (Debian 4.5.2-8) ) #4 SMP Wed Apr 27 02:50:28 EEST 2011
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38.4 root=UUID=ae47c3b2-fdcb-4a68-b6f8-4278e00c5bf2 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[    0.000000]  BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. M56S-S3/GA-M56S-S3, BIOS F1 07/02/2007
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 007FF00000 mask FFFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000f4a40] f4a40
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-000000007fef0000
[    0.000000]  0000000000 - 007fe00000 page 2M
[    0.000000]  007fe00000 - 007fef0000 page 4k
[    0.000000] kernel direct mapping tables up to 7fef0000 @ 1fffc000-20000000
[    0.000000] RAMDISK: 3541a000 - 36a05000
[    0.000000] ACPI: RSDP 00000000000f6400 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 000000007fef3000 00038 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: FACP 000000007fef3040 00074 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: DSDT 000000007fef30c0 04582 (v01 GBT    NVDAACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 000000007fef0000 00040
[    0.000000] ACPI: SSDT 000000007fef7700 002CC (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 000000007fef7a00 00038 (v01 GBT    NVDAACPI 42302E31 NVDA 00000098)
[    0.000000] ACPI: MCFG 000000007fef7a40 0003C (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: APIC 000000007fef7680 00072 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007fef0000
[    0.000000] Initmem setup node 0 0000000000000000-000000007fef0000
[    0.000000]   NODE_DATA [000000007feeb000 - 000000007feeffff]
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fef0
[    0.000000] On node 0 totalpages: 523903
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7109 pages used for memmap
[    0.000000]   DMA32 zone: 512811 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82496 r8192 d24000 u1048576
[    0.000000] pcpu-alloc: s82496 r8192 d24000 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516732
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38.4 root=UUID=ae47c3b2-fdcb-4a68-b6f8-4278e00c5bf2 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ a3f0000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 2035848k/2096064k available (3092k kernel code, 452k absent, 59764k reserved, 3568k data, 608k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2913.414 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5826.82 BogoMIPS (lpj=2913414)
[    0.001010] pid_max: default: 32768 minimum: 301
[    0.001034] Security Framework initialized
[    0.001210] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002419] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.002933] Mount-cache hash table entries: 256
[    0.003104] Initializing cgroup subsys ns
[    0.003107] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.003110] Initializing cgroup subsys cpuacct
[    0.003114] Initializing cgroup subsys devices
[    0.003116] Initializing cgroup subsys freezer
[    0.003118] Initializing cgroup subsys blkio
[    0.003154] tseg: 007ff00000
[    0.003156] CPU: Physical Processor ID: 0
[    0.003157] CPU: Processor Core ID: 0
[    0.003159] mce: CPU supports 5 MCE banks
[    0.003170] using C1E aware idle routine
[    0.003402] ACPI: Core revision 20110112
[    0.006062] Setting APIC routing to flat
[    0.007352] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.017365] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 02
[    0.017998] Performance Events: AMD PMU driver.
[    0.017998] ... version:                0
[    0.017998] ... bit width:              48
[    0.017998] ... generic registers:      4
[    0.017998] ... value mask:             0000ffffffffffff
[    0.017998] ... max period:             00007fffffffffff
[    0.017998] ... fixed-purpose events:   0
[    0.017998] ... event mask:             000000000000000f
[    0.017998] NMI watchdog enabled, takes one hw-pmu counter.
[    0.017998] Booting Node   0, Processors  #1 Ok.
[    0.088059] NMI watchdog enabled, takes one hw-pmu counter.
[    0.088081] Brought up 2 CPUs
[    0.088083] Total of 2 processors activated (11652.89 BogoMIPS).
[    0.088493] devtmpfs: initialized
[    0.100000] NET: Registered protocol family 16
[    0.100103] node 0 link 0: io port [1000, fffff]
[    0.100106] TOM: 0000000080000000 aka 2048M
[    0.100108] node 0 link 0: mmio [f0000000, f1ffffff]
[    0.100111] node 0 link 0: mmio [a0000, bffff]
[    0.100113] node 0 link 0: mmio [80000000, ffb7ffff]
[    0.100115] bus: [00, ff] on node 0 link 0
[    0.100118] bus: 00 index 0 [io  0x0000-0xffff]
[    0.100120] bus: 00 index 1 [mem 0x80000000-0xfcffffffff]
[    0.100122] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[    0.100136] ACPI: bus type pci registered
[    0.100163] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
[    0.100166] PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
[    0.101985] PCI: Using configuration type 1 for base access
[    0.102332] bio: create slab <bio-0> at 0
[    0.103282] ACPI: EC: Look up EC in DSDT
[    0.106245] ACPI: Interpreter enabled
[    0.106249] ACPI: (supports S0 S1 S4 S5)
[    0.106265] ACPI: Using IOAPIC for interrupt routing
[    0.111868] ACPI: No dock devices found.
[    0.111872] HEST: Table not found.
[    0.111875] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.111922] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.112027] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.112029] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.112032] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.112034] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.112036] pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
[    0.112060] pci 0000:00:00.0: [10de:0444] type 0 class 0x000500
[    0.112210] pci 0000:00:01.0: [10de:0441] type 0 class 0x000601
[    0.112246] pci 0000:00:01.1: [10de:0446] type 0 class 0x000c05
[    0.112256] pci 0000:00:01.1: reg 10: [io  0xe000-0xe03f]
[    0.112269] pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
[    0.112274] pci 0000:00:01.1: reg 24: [io  0x1c40-0x1c7f]
[    0.112293] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.112298] pci 0000:00:01.1: PME# disabled
[    0.112309] pci 0000:00:01.2: [10de:0445] type 0 class 0x000500
[    0.112347] pci 0000:00:02.0: [10de:0454] type 0 class 0x000c03
[    0.112355] pci 0000:00:02.0: reg 10: [mem 0xf6008000-0xf6008fff]
[    0.112381] pci 0000:00:02.0: supports D1 D2
[    0.112382] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112385] pci 0000:00:02.0: PME# disabled
[    0.112397] pci 0000:00:02.1: [10de:0455] type 0 class 0x000c03
[    0.112407] pci 0000:00:02.1: reg 10: [mem 0xf6006000-0xf60060ff]
[    0.112437] pci 0000:00:02.1: supports D1 D2
[    0.112438] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112441] pci 0000:00:02.1: PME# disabled
[    0.112462] pci 0000:00:06.0: [10de:0450] type 0 class 0x000200
[    0.112471] pci 0000:00:06.0: reg 10: [mem 0xf6007000-0xf6007fff]
[    0.112475] pci 0000:00:06.0: reg 14: [io  0xc800-0xc807]
[    0.112497] pci 0000:00:06.0: supports D1 D2
[    0.112499] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112502] pci 0000:00:06.0: PME# disabled
[    0.112517] pci 0000:00:07.0: [10de:044a] type 0 class 0x000403
[    0.112526] pci 0000:00:07.0: reg 10: [mem 0xf6000000-0xf6003fff]
[    0.112555] pci 0000:00:07.0: PME# supported from D3hot D3cold
[    0.112558] pci 0000:00:07.0: PME# disabled
[    0.112576] pci 0000:00:08.0: [10de:0449] type 1 class 0x000604
[    0.112608] pci 0000:00:09.0: [10de:0448] type 0 class 0x000101
[    0.112627] pci 0000:00:09.0: reg 20: [io  0xf000-0xf00f]
[    0.112651] pci 0000:00:0a.0: [10de:045d] type 0 class 0x000101
[    0.112657] pci 0000:00:0a.0: reg 10: [io  0x09f0-0x09f7]
[    0.112661] pci 0000:00:0a.0: reg 14: [io  0x0bf0-0x0bf3]
[    0.112665] pci 0000:00:0a.0: reg 18: [io  0x0970-0x0977]
[    0.112668] pci 0000:00:0a.0: reg 1c: [io  0x0b70-0x0b73]
[    0.112672] pci 0000:00:0a.0: reg 20: [io  0xdc00-0xdc0f]
[    0.112676] pci 0000:00:0a.0: reg 24: [mem 0xf6004000-0xf6005fff]
[    0.112704] pci 0000:00:0d.0: [10de:0458] type 1 class 0x000604
[    0.112721] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112723] pci 0000:00:0d.0: PME# disabled
[    0.112741] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.112756] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.112769] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.112783] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.112800] PCI: peer root bus 00 res updated from pci conf
[    0.112842] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.112845] pci 0000:00:08.0:   bridge window [io  0xa000-0xafff]
[    0.112848] pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.112851] pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.112853] pci 0000:00:08.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.112856] pci 0000:00:08.0:   bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[    0.112858] pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.112885] pci 0000:02:00.0: [10de:0421] type 0 class 0x000300
[    0.112893] pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf4ffffff]
[    0.112901] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.112909] pci 0000:02:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff 64bit]
[    0.112915] pci 0000:02:00.0: reg 24: [io  0xb000-0xb07f]
[    0.112921] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.114001] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    0.114004] pci 0000:00:0d.0:   bridge window [io  0xb000-0xbfff]
[    0.114007] pci 0000:00:0d.0:   bridge window [mem 0xf2000000-0xf5ffffff]
[    0.114010] pci 0000:00:0d.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.114017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.114145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.114272]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.126921] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
[    0.126957] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.126998] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.127034] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.127069] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.127103] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.127138] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.127174] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.127209] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.127245] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[    0.127281] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[    0.127315] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0
[    0.127351] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0
[    0.127386] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[    0.127422] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[    0.127457] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.127494] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[    0.127528] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.127564] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.127628] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.127689] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.127749] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.127809] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.127870] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.127934] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.127999] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.128059] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.128119] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[    0.128179] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
[    0.128240] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
[    0.128300] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
[    0.128361] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.128421] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.128482] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.128544] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.128605] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.128666] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.128727] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.128821] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.128823] vgaarb: loaded
[    0.128854] PCI: Using ACPI for IRQ routing
[    0.128857] PCI: pci_cache_line_size set to 64 bytes
[    0.128896] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.128898] reserve RAM buffer: 000000007fef0000 - 000000007fffffff 
[    0.129019] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.129025] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.129029] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.132018] Switching to clocksource hpet
[    0.132902] Switched to NOHz mode on CPU #0
[    0.132924] Switched to NOHz mode on CPU #1
[    0.133277] pnp: PnP ACPI init
[    0.133302] ACPI: bus type pnp registered
[    0.133405] pnp 00:00: [bus 00-ff]
[    0.133408] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.133410] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.133411] pnp 00:00: [io  0x0d00-0xffff window]
[    0.133414] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.133416] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.133418] pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
[    0.133487] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.133540] pnp 00:01: [io  0x1000-0x107f]
[    0.133542] pnp 00:01: [io  0x1080-0x10ff]
[    0.133544] pnp 00:01: [io  0x1400-0x147f]
[    0.133546] pnp 00:01: [io  0x1480-0x14ff]
[    0.133547] pnp 00:01: [io  0x1800-0x187f]
[    0.133549] pnp 00:01: [io  0x1880-0x18ff]
[    0.133552] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.133610] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.133613] system 00:01: [io  0x1080-0x10ff] has been reserved
[    0.133615] system 00:01: [io  0x1400-0x147f] has been reserved
[    0.133618] system 00:01: [io  0x1480-0x14ff] has been reserved
[    0.133620] system 00:01: [io  0x1800-0x187f] has been reserved
[    0.133623] system 00:01: [io  0x1880-0x18ff] has been reserved
[    0.133625] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.133662] pnp 00:02: [io  0x0010-0x001f]
[    0.133664] pnp 00:02: [io  0x0022-0x003f]
[    0.133666] pnp 00:02: [io  0x0044-0x005f]
[    0.133668] pnp 00:02: [io  0x0062-0x0063]
[    0.133669] pnp 00:02: [io  0x0065-0x006f]
[    0.133671] pnp 00:02: [io  0x0074-0x007f]
[    0.133673] pnp 00:02: [io  0x0091-0x0093]
[    0.133675] pnp 00:02: [io  0x00a2-0x00bf]
[    0.133676] pnp 00:02: [io  0x00e0-0x00ef]
[    0.133678] pnp 00:02: [io  0x04d0-0x04d1]
[    0.133680] pnp 00:02: [io  0x0800-0x087f]
[    0.133682] pnp 00:02: [io  0x0295-0x0314]
[    0.133683] pnp 00:02: [io  0x0290-0x0294]
[    0.133728] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.133731] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.133733] system 00:02: [io  0x0295-0x0314] has been reserved
[    0.133735] system 00:02: [io  0x0290-0x0294] has been reserved
[    0.133738] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.133748] pnp 00:03: [dma 4]
[    0.133750] pnp 00:03: [io  0x0000-0x000f]
[    0.133751] pnp 00:03: [io  0x0080-0x0090]
[    0.133753] pnp 00:03: [io  0x0094-0x009f]
[    0.133755] pnp 00:03: [io  0x00c0-0x00df]
[    0.133784] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.133793] pnp 00:04: [io  0x0070-0x0073]
[    0.133806] pnp 00:04: [irq 8]
[    0.133832] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.133839] pnp 00:05: [io  0x0061]
[    0.133869] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.133878] pnp 00:06: [io  0x00f0-0x00ff]
[    0.133884] pnp 00:06: [irq 13]
[    0.133910] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.134151] pnp 00:07: [io  0x03f8-0x03ff]
[    0.134157] pnp 00:07: [irq 4]
[    0.134210] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.134374] pnp 00:08: [io  0x0378-0x037f]
[    0.134379] pnp 00:08: [irq 7]
[    0.134423] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.134512] pnp 00:09: [irq 12]
[    0.134548] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.134566] pnp 00:0a: [io  0x0060]
[    0.134568] pnp 00:0a: [io  0x0064]
[    0.134572] pnp 00:0a: [irq 1]
[    0.134600] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.135034] pnp 00:0b: [mem 0xf0000000-0xf1ffffff]
[    0.135084] system 00:0b: [mem 0xf0000000-0xf1ffffff] has been reserved
[    0.135087] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.135174] pnp 00:0c: [mem 0x000d0000-0x000d3fff]
[    0.135176] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[    0.135178] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[    0.135180] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[    0.135182] pnp 00:0c: [mem 0x7fef0000-0x7fefffff]
[    0.135184] pnp 00:0c: [mem 0xffff0000-0xffffffff]
[    0.135186] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.135188] pnp 00:0c: [mem 0x00100000-0x7feeffff]
[    0.135190] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    0.135191] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[    0.135246] system 00:0c: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.135249] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.135252] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.135254] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.135257] system 00:0c: [mem 0x7fef0000-0x7fefffff] could not be reserved
[    0.135259] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[    0.135262] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.135264] system 00:0c: [mem 0x00100000-0x7feeffff] could not be reserved
[    0.135267] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.135269] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.135272] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.135286] pnp: PnP ACPI: found 13 devices
[    0.135287] ACPI: ACPI bus type pnp unregistered
[    0.141800] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[    0.141803] pci 0000:00:08.0:   bridge window [io  0xa000-0xafff]
[    0.141806] pci 0000:00:08.0:   bridge window [mem disabled]
[    0.141809] pci 0000:00:08.0:   bridge window [mem pref disabled]
[    0.141816] pci 0000:02:00.0: BAR 6: assigned [mem 0xf5000000-0xf501ffff pref]
[    0.141818] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    0.141820] pci 0000:00:0d.0:   bridge window [io  0xb000-0xbfff]
[    0.141823] pci 0000:00:0d.0:   bridge window [mem 0xf2000000-0xf5ffffff]
[    0.141826] pci 0000:00:0d.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.141834] pci 0000:00:08.0: setting latency timer to 64
[    0.141838] pci 0000:00:0d.0: setting latency timer to 64
[    0.141841] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.141843] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[    0.141845] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.141847] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.141849] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
[    0.141851] pci_bus 0000:01: resource 5 [mem 0x80000000-0xfcffffffff]
[    0.141853] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.141856] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.141858] pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf5ffffff]
[    0.141860] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.141894] NET: Registered protocol family 2
[    0.141992] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.142837] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.144762] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.145300] TCP: Hash tables configured (established 262144 bind 65536)
[    0.145303] TCP reno registered
[    0.145314] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.145341] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.145461] NET: Registered protocol family 1
[    0.170474] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.170520] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.170566] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.170620] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.170675] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.170691] pci 0000:02:00.0: Boot video device
[    0.170693] PCI: CLS 32 bytes, default 64
[    0.170744] Unpacking initramfs...
[    0.675723] Freeing initrd memory: 22444k freed
[    0.689405] audit: initializing netlink socket (disabled)
[    0.689417] type=2000 audit(1305625398.688:1): initialized
[    0.697541] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.699458] VFS: Disk quotas dquot_6.5.2
[    0.699521] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.699612] msgmni has been set to 4020
[    0.699939] alg: No test for stdrng (krng)
[    0.699992] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.699995] io scheduler noop registered
[    0.699997] io scheduler deadline registered
[    0.700046] io scheduler cfq registered (default)
[    0.700151] pcieport 0000:00:0d.0: setting latency timer to 64
[    0.700178] pcieport 0000:00:0d.0: irq 40 for MSI/MSI-X
[    0.700356] ERST: Table is not found!
[    0.700426] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.720914] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.750785] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.751017] Linux agpgart interface v0.103
[    0.751103] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.751521] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.751528] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.751653] mousedev: PS/2 mouse device common for all mice
[    0.751705] rtc_cmos 00:04: RTC can wake from S4
[    0.751776] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.751809] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.751820] cpuidle: using governor ladder
[    0.751822] cpuidle: using governor menu
[    0.752032] TCP cubic registered
[    0.752149] NET: Registered protocol family 10
[    0.752621] Mobile IPv6
[    0.752623] NET: Registered protocol family 17
[    0.752627] lib80211: common routines for IEEE802.11 drivers
[    0.752629] lib80211_crypt: registered algorithm 'NULL'
[    0.752638] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[    0.752750] PM: Hibernation image not present or could not be loaded.
[    0.752760] registered taskstats version 1
[    0.752960] rtc_cmos 00:04: setting system clock to 2011-05-17 09:43:19 UTC (1305625399)
[    0.754097] Freeing unused kernel memory: 608k freed
[    0.754427] Write protecting the kernel read-only data: 6144k
[    0.758153] Freeing unused kernel memory: 988k freed
[    0.761662] Freeing unused kernel memory: 800k freed
[    0.769326] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.781792] <30>udev[70]: starting version 167
[    0.882244] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.882506] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    0.882529] forcedeth 0000:00:06.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[    0.882534] forcedeth 0000:00:06.0: setting latency timer to 64
[    0.898880] Uniform Multi-Platform E-IDE driver
[    0.912941] usbcore: registered new interface driver usbfs
[    0.913084] usbcore: registered new interface driver hub
[    0.913132] usbcore: registered new device driver usb
[    0.916412] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.405001] forcedeth 0000:00:06.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:7d:e8:8d:66
[    1.405014] forcedeth 0000:00:06.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    1.405091] amd74xx 0000:00:09.0: UDMA133 controller
[    1.405094] amd74xx 0000:00:09.0: IDE controller (0x10de:0x0448 rev 0xa1)
[    1.405110] amd74xx 0000:00:09.0: IDE port disabled
[    1.405121] amd74xx 0000:00:09.0: not 100% native mode: will probe irqs later
[    1.405126]     ide0: BM-DMA at 0xf000-0xf007
[    1.405132] Probing IDE interface ide0...
[    1.924089] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    1.924621] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[    1.924638] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[    1.924656] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    1.924659] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    1.924687] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.927043] ehci_hcd 0000:00:02.1: debug port 1
[    1.927049] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[    1.927067] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6006000
[    1.933015] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.933039] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.933041] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.933043] usb usb1: Product: EHCI Host Controller
[    1.933045] usb usb1: Manufacturer: Linux 2.6.38.4 ehci_hcd
[    1.933047] usb usb1: SerialNumber: 0000:00:02.1
[    1.933183] hub 1-0:1.0: USB hub found
[    1.933188] hub 1-0:1.0: 10 ports detected
[    1.952284] SCSI subsystem initialized
[    1.974160] libata version 3.00 loaded.
[    1.982303] ahci 0000:00:0a.0: version 3.0
[    1.982527] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    1.982543] ahci 0000:00:0a.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
[    1.982581] ahci 0000:00:0a.0: irq 41 for MSI/MSI-X
[    1.982586] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[    1.982639] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    1.982642] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pio ccc 
[    1.982646] ahci 0000:00:0a.0: setting latency timer to 64
[    1.983628] scsi0 : ahci
[    1.983765] scsi1 : ahci
[    1.983851] scsi2 : ahci
[    1.983928] scsi3 : ahci
[    1.984064] ata1: SATA max UDMA/133 abar m8192@0xf6004000 port 0xf6004100 irq 41
[    1.984067] ata2: SATA max UDMA/133 abar m8192@0xf6004000 port 0xf6004180 irq 41
[    1.984070] ata3: SATA max UDMA/133 abar m8192@0xf6004000 port 0xf6004200 irq 41
[    1.984072] ata4: SATA max UDMA/133 abar m8192@0xf6004000 port 0xf6004280 irq 41
[    2.023311] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.023561] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 20
[    2.023577] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 20 (level, low) -> IRQ 20
[    2.023596] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    2.023598] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    2.023613] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.028042] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf6008000
[    2.081043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.081046] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.081048] usb usb2: Product: OHCI Host Controller
[    2.081050] usb usb2: Manufacturer: Linux 2.6.38.4 ohci_hcd
[    2.081051] usb usb2: SerialNumber: 0000:00:02.0
[    2.081175] hub 2-0:1.0: USB hub found
[    2.081181] hub 2-0:1.0: 10 ports detected
[    2.235025] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    2.289025] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.289039] ata4: SATA link down (SStatus 0 SControl 300)
[    2.289054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.289061] ata1: SATA link down (SStatus 0 SControl 300)
[    2.289947] ata3.00: ATA-8: WDC WD5000AAKS-00WWPA0, 01.03B01, max UDMA/133
[    2.289950] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.290947] ata3.00: configured for UDMA/133
[    2.291751] ata2.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[    2.295736] ata2.00: configured for UDMA/100
[    2.406871] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH20NS10  EL00 PQ: 0 ANSI: 5
[    2.407160] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[    2.423410] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.423462] sd 2:0:0:0: [sda] Write Protect is off
[    2.423465] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.423529] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.424774] scsi 1:0:0:0: Attached scsi generic sg0 type 5
[    2.424839] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.470466] usb 1-1: New USB device found, idVendor=045e, idProduct=074a
[    2.470469] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.470471] usb 1-1: Product: Microsoft LifeCam
[    2.470473] usb 1-1: Manufacturer: Microsoft
[    2.476313]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[    2.476904] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.153207] PM: Starting manual resume from disk
[    3.153211] PM: Hibernation image partition 8:3 present
[    3.153213] PM: Looking for hibernation image.
[    3.153388] PM: Image not found (code -22)
[    3.153390] PM: Hibernation image not present or could not be loaded.
[    3.218642] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.359825] <30>udev[399]: starting version 167
[    4.514526] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    4.514533] ACPI: Power Button [PWRB]
[    4.514622] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    4.514625] ACPI: Power Button [PWRF]
[    4.524186] MCE: In-kernel MCE decoding enabled.
[    4.617870] ACPI: acpi_idle registered with cpuidle
[    4.677857] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    4.717415] EDAC MC: Ver: 2.1.0 Apr 27 2011
[    4.806341] EDAC amd64_edac: v3.3.0
[    4.806458] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[    4.806505] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[    4.806781] EDAC amd64: DRAM ECC disabled.
[    4.806794] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    4.806795]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    4.806796]  (Note that use of the override may cause unknown side effects.)
[    5.093363] [drm] Initialized drm 1.1.0 20060810
[    5.432197] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[    5.637849] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[    5.637868] nouveau 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[    5.637873] nouveau 0000:02:00.0: setting latency timer to 64
[    5.641740] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x086100a2)
[    5.643819] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[    5.698205] [drm] nouveau 0000:02:00.0: ... appears to be valid
[    5.698209] [drm] nouveau 0000:02:00.0: BIT BIOS found
[    5.698211] [drm] nouveau 0000:02:00.0: Bios version 60.86.34.00
[    5.698215] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
[    5.698217] [drm] nouveau 0000:02:00.0: BIT table 'd' not found
[    5.698220] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[    5.698223] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[    5.698226] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 04011310 00000030
[    5.698228] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02011312 00020030
[    5.698230] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 010223f1 00c0c080
[    5.698233] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 14 2
[    5.698236] [drm] nouveau 0000:02:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
[    5.698239] [drm] nouveau 0000:02:00.0:   1: 0x00002130: type 0x30 idx 1 tag 0x08
[    5.698241] [drm] nouveau 0000:02:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[    5.698244] [drm] nouveau 0000:02:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
[    5.698246] [drm] nouveau 0000:02:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
[    5.698251] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xBC41
[    5.724124] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xBF5C
[    5.743016] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xCB9E
[    5.743024] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xCC90
[    5.745082] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xCE73
[    5.745084] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xCED8
[    5.766020] [drm] nouveau 0000:02:00.0: 0xCED8: Condition still not met after 20ms, skipping following opcodes
[    5.784771] [drm] nouveau 0000:02:00.0: 1 available performance level(s)
[    5.784776] [drm] nouveau 0000:02:00.0: 0: memory 333MHz core 450MHz shader 918MHz fanspeed 100%
[    5.784792] [drm] nouveau 0000:02:00.0: c: memory 333MHz core 450MHz shader 918MHz voltage 1320mV
[    5.784876] [TTM] Zone  kernel: Available graphics memory: 1030344 kiB.
[    5.784878] [TTM] Initializing pool allocator.
[    5.784896] [drm] nouveau 0000:02:00.0: Detected 256MiB VRAM
[    5.793579] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[    5.804612] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[    5.804615] [drm] nouveau 0000:02:00.0: TV-1 has no encoders, removing
[    5.804914] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.804916] [drm] No driver support for vblank timestamp query.
[    5.964949] [drm] nouveau 0000:02:00.0: allocated 1440x900 fb: 0x60000000, bo ffff88007acf1000
[    5.970387] Console: switching to colour frame buffer device 180x56
[    5.972185] fb0: nouveaufb frame buffer device
[    5.972186] drm: registered panic notifier
[    5.972192] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
[    6.149690] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[    6.149697] HDA Intel 0000:00:07.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
[    6.149701] hda_intel: Disable MSI for Nvidia chipset
[    6.149742] HDA Intel 0000:00:07.0: setting latency timer to 64
[    6.416018] hda_codec: ALC888: BIOS auto-probing.
[    6.509103] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input4
[    6.644459] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input5
[    7.059146] Adding 2499580k swap on /dev/sda3.  Priority:-1 extents:1 across:2499580k 
[    7.063872] EXT4-fs (sda2): re-mounted. Opts: (null)
[    7.592069] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    7.702282] loop: module loaded
[    9.452531] EXT3-fs: barriers not enabled
[    9.461727] kjournald starting.  Commit interval 5 seconds
[    9.461950] EXT3-fs (sda1): using internal journal
[    9.461954] EXT3-fs (sda1): mounted filesystem with ordered data mode
[    9.528775] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[    9.671099] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    9.750851] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    9.818655] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    9.930764] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   11.086620] forcedeth 0000:00:06.0: irq 42 for MSI/MSI-X
[   11.161164] fuse init (API version 7.16)
[   11.976286] kvm: Nested Virtualization enabled
[   12.106898] vboxdrv: Found 2 processor cores.
[   12.107203] VBoxDrv: dbg - g_abExecMemory=ffffffffa04d12a0
[   12.107218] vboxdrv: fAsync=1 offMin=0x59348 offMax=0x59348
[   12.107818] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[   12.107821] vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
[   14.885066] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2 cpu cores) (version 2.20.00)
[   14.885123] powernow-k8:    0 : fid 0x15 (2900 MHz), vid 0x8
[   14.885125] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x9
[   14.885127] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xb
[   14.885128] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xd
[   14.885130] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xf
[   14.885132] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x11
[   14.885134] powernow-k8:    6 : fid 0x2 (1000 MHz), vid 0x12
[   15.159329] sshd (1576): /proc/1576/oom_adj is deprecated, please use /proc/1576/oom_score_adj instead.
[   22.090031] eth0: no IPv6 routers present

Attachment: config_faulty
Description: Binary data

Attachment: config_working
Description: Binary data


--- End Message ---
Reply to: