Bug#625821: linux-image-2.6.32-5-vserver-686: vservers that have settatr --barrier set fail to boot with 'vsysctl: open("."): Permission denied'
Package: linux-2.6
Version: 2.6.32-31
Severity: normal
After upgrading from lenny to squeeze, one of the vserver guests failed to start. It's root directory had, in contrast to all the other vservers it's "barrier" flag set:
vhost:/var/lib# showattr vservers
----Bui- vservers
----bui- vservers/foo
----bui- vservers/bar
----bui- vservers/baz
----bui- vservers/bam
----Bui- vservers/broky
vhost:/var/lib# vserver broky start
vsysctl: open("."): Permission denied
...
After removing that barrier flag, starting that vserver would fail in yet another way:
vhost:/var/lib# setattr --~barrier vservers/broky/
vhost:/var/lib# vserver broky start
vcontext: execvp("/etc/init.d/rc"): No such file or directory
...
Turns out that flag needs to be removed recursively.
vhost:/var/lib# setattr -R --~barrier vservers/broky/
After that the vserver guest starts as expected.
I'm not sure which component is at fault here (the kernel resp. the vserver patches or util-vserver). As said under Ãlenny this identical setup would work. It's also not at all clear how come just that one vserver guest had the flag set wrong.
Thanks for providing a vserver patched kernel in the first place and to micah to still caring about the util-vserver package. I hope this bugreport will save an hour or two to anybody having the same problem.
*t
-- Package-specific info:
** Version:
Linux version 2.6.32-5-vserver-686 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Mar 9 00:07:05 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-vserver-686 root=UUID=ed1232c1-222a-333f-bbec-3433326501c2 ro console=tty0 console=ttyS0,38400n8 quiet
** Not tainted
** Kernel log:
[ 9.702410] bonding: bond0: Adding slave eth0.
[ 9.702417] bonding bond0: master_dev is not up in bond_enslave
[ 9.717640] e100 0000:02:06.0: firmware: requesting e100/d101m_ucode.bin
[ 9.784568] bonding: bond0: enslaving eth0 as a backup interface with a down link.
[ 9.788328] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 9.795713] bonding: bond0: doing slave updates when interface is down.
[ 9.795729] bonding: bond0: Adding slave eth1.
[ 9.795735] bonding bond0: master_dev is not up in bond_enslave
[ 9.813641] e100 0000:02:07.0: firmware: requesting e100/d101m_ucode.bin
[ 9.840570] bonding: bond0: enslaving eth1 as a backup interface with a down link.
[ 9.844317] e100: eth1 NIC Link is Up 100 Mbps Full Duplex
[ 9.863207] bonding: bond0: link status up for interface eth0, enabling it in 0 ms.
[ 9.863214] bonding: bond0: link status up for interface eth1, enabling it in 200 ms.
[ 9.863502] ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 9.863515] bonding: bond0: link status definitely up for interface eth0.
[ 9.863521] bonding: bond0: making interface eth0 the new active one.
[ 9.863569] bonding: bond0: first active interface up!
[ 9.863837] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 10.060050] bonding: bond0: link status definitely up for interface eth1.
[ 10.757066] RPC: Registered udp transport module.
[ 10.757072] RPC: Registered tcp transport module.
[ 10.757076] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.809156] Slow work thread pool: Starting up
[ 10.809272] Slow work thread pool: Ready
[ 10.809408] FS-Cache: Loaded
[ 10.880137] FS-Cache: Netfs 'nfs' registered for caching
[ 10.926745] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.478920] tun: Universal TUN/TAP device driver, 1.6
[ 14.478927] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 20.812029] bond0: no IPv6 routers present
[ 30.413991] svc: failed to register lockdv1 RPC service (errno 97).
[ 30.415903] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 30.424549] NFSD: starting 90-second grace period
[ 44.372777] vxW: [?exec-remount?,2316:#43|43|43] did hit the barrier.
[ 44.372787] vxW: [?exec-remount?,2316:#43|43|43] did hit the barrier.
[ 44.373210] vxW: [?vsysctl?,2316:#43|43|43] did hit the barrier.
[ 44.380097] vxW: [xid #43] !!! limit: f00e8060[VM,9] = -5 on exit.
[37277.068144] vxW: [xid #53] !!! limit: f00ed060[VM,9] = -2656 on exit.
[85697.347863] vxW: [?mesg?,9307:#46|46|46] denied 2 access to devpts:f6951b80[#0,3]
[86178.874596] vxW: [?mesg?,11362:#42|42|42] denied 2 access to devpts:ef820cf0[#0,3]
[86364.325001] vxW: [?mesg?,13286:#46|46|46] denied 2 access to devpts:ef885b80[#0,3]
[86505.228983] vxW: [?mesg?,13610:#42|42|42] denied 2 access to devpts:f6963b80[#0,3]
[160731.182513] vxW: [?exec-remount?,9219:#43|43|43] did hit the barrier.
[160731.182525] vxW: [?exec-remount?,9219:#43|43|43] did hit the barrier.
[160731.186532] vxW: [?vsysctl?,9219:#43|43|43] did hit the barrier.
[160731.192111] vxW: [xid #43] !!! limit: daf5d060[VM,9] = -5 on exit.
[176022.630062] md: data-check of RAID array md0
[176022.630069] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[176022.630073] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
[176022.630080] md: using 128k window, over a total of 245111616 blocks.
[176022.630552] md: md0: data-check done.
[245691.559696] vxW: [?exec-remount?,29398:#43|43|43] did hit the barrier.
[245691.559712] vxW: [?exec-remount?,29398:#43|43|43] did lookup hidden sda1:ef98609c[#0,494760] ?/var/lib/vservers/broky/proc?.
[245691.678793] vxW: [?vcontext?,29398:#43|43|43] did hit the barrier.
[245691.678806] vxW: [?vcontext?,29398:#43|43|43] did lookup hidden sda1:dadcb2e4[#0,494603] ?//etc?.
[245691.840683] vxW: [xid #43] !!! limit: c2433060[VM,9] = -12 on exit.
[245714.692809] vxW: [?exec-remount?,30028:#43|43|43] did hit the barrier.
[245714.692820] vxW: [?exec-remount?,30028:#43|43|43] did hit the barrier.
[245714.693207] vxW: [?vsysctl?,30028:#43|43|43] did hit the barrier.
[245714.700110] vxW: [xid #43] !!! limit: c2433060[VM,9] = -5 on exit.
[246586.516330] vxW: [?exec-remount?,2096:#43|43|43] did hit the barrier.
[246586.516345] vxW: [?exec-remount?,2096:#43|43|43] did lookup hidden sda1:f13e56f4[#0,494760] ?/var/lib/vservers/broky/proc?.
[246586.558292] vxW: [?vcontext?,2096:#43|43|43] did hit the barrier.
[246586.558305] vxW: [?vcontext?,2096:#43|43|43] did lookup hidden sda1:eec9c4ac[#0,494603] ?//etc?.
[246586.678868] vxW: [xid #43] !!! limit: c2431060[VM,9] = -12 on exit.
[246678.308368] vxW: [?exec-remount?,2318:#43|43|43] did hit the barrier.
[246678.308384] vxW: [?exec-remount?,2318:#43|43|43] did lookup hidden sda1:f13e56f4[#0,494760] ?/var/lib/vservers/broky/proc?.
[246678.308396] vxW: [?exec-remount?,2318:#43|43|43] did hit the barrier.
[246678.308405] vxW: [?exec-remount?,2318:#43|43|43] did lookup hidden sda1:efb562a4[#0,656975] ?/var/lib/vservers/broky/sys?.
[246678.311368] vxW: [?vcontext?,2318:#43|43|43] did hit the barrier.
[246678.311381] vxW: [?vcontext?,2318:#43|43|43] did lookup hidden sda1:f108f8fc[#0,1183287] ?//bin?.
[246678.311396] vxW: [?vcontext?,2318:#43|43|43] did hit the barrier.
[246678.311404] vxW: [?vcontext?,2318:#43|43|43] did lookup hidden sda1:efb59d0c[#0,495832] ?//usr?.
[246678.311415] vxW: [?vcontext?,2318:#43|43|43] did hit the barrier.
[246678.311423] vxW: [?vcontext?,2318:#43|43|43] did lookup hidden sda1:f02242a4[#0,1183580] ?//sbin?.
[246678.311434] vxW: [?vcontext?,2318:#43|43|43] did hit the barrier.
[246678.311442] vxW: [?vcontext?,2318:#43|43|43] did lookup hidden sda1:efb59d0c[#0,495832] ?//usr?.
[246678.385517] vxW: [xid #43] !!! limit: f00ed060[VM,9] = -12 on exit.
[246986.578357] vxW: [?exec-remount?,4138:#43|43|43] did hit the barrier.
[246986.578372] vxW: [?exec-remount?,4138:#43|43|43] did lookup hidden sda1:f13e56f4[#0,494760] ?/var/lib/vservers/broky/proc?.
[246986.578384] vxW: [?exec-remount?,4138:#43|43|43] did hit the barrier.
[246986.578393] vxW: [?exec-remount?,4138:#43|43|43] did lookup hidden sda1:efb562a4[#0,656975] ?/var/lib/vservers/broky/sys?.
[246986.581915] vxW: [?vcontext?,4138:#43|43|43] did hit the barrier.
[246986.581927] vxW: [?vcontext?,4138:#43|43|43] did lookup hidden sda1:eec9c4ac[#0,494603] ?//etc?.
[246986.655385] vxW: [xid #43] !!! limit: e07b3060[VM,9] = -12 on exit.
[247086.351263] vxW: [?exec-remount?,4587:#43|43|43] did hit the barrier.
[247086.351279] vxW: [?exec-remount?,4587:#43|43|43] did lookup hidden sda1:f13e56f4[#0,494760] ?/var/lib/vservers/broky/proc?.
[247086.351290] vxW: [?exec-remount?,4587:#43|43|43] did hit the barrier.
[247086.351299] vxW: [?exec-remount?,4587:#43|43|43] did lookup hidden sda1:efb562a4[#0,656975] ?/var/lib/vservers/broky/sys?.
[247086.354946] vxW: [?vcontext?,4587:#43|43|43] did hit the barrier.
[247086.354959] vxW: [?vcontext?,4587:#43|43|43] did lookup hidden sda1:eec9c4ac[#0,494603] ?//etc?.
[247086.428709] vxW: [xid #43] !!! limit: c25bc060[VM,9] = -12 on exit.
[247168.454695] vxW: [?exec-remount?,6070:#43|43|43] did hit the barrier.
[247168.454710] vxW: [?exec-remount?,6070:#43|43|43] did lookup hidden sda1:f13e56f4[#0,494760] ?/var/lib/vservers/broky/proc?.
[247168.454722] vxW: [?exec-remount?,6070:#43|43|43] did hit the barrier.
[247168.454731] vxW: [?exec-remount?,6070:#43|43|43] did lookup hidden sda1:efb562a4[#0,656975] ?/var/lib/vservers/broky/sys?.
[247168.458242] vxW: [?vcontext?,6070:#43|43|43] did hit the barrier.
[247168.458255] vxW: [?vcontext?,6070:#43|43|43] did lookup hidden sda1:eec9c4ac[#0,494603] ?//etc?.
[247168.532480] vxW: [xid #43] !!! limit: f00eb060[VM,9] = -12 on exit.
[248586.152248] vxW: [xid #43] !!! limit: daf5d060[VM,9] = -389 on exit.
** Model information
not available
** Loaded modules:
Module Size Used by
tun 8924 2
nfsd 194175 6
exportfs 2622 1 nfsd
nfs 207710 0
lockd 49453 2 nfsd,nfs
fscache 24682 1 nfs
nfs_acl 1695 2 nfsd,nfs
auth_rpcgss 25276 2 nfsd,nfs
sunrpc 135004 13 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
bonding 65212 0
hwmon_vid 1528 0
eeprom 2609 0
psmouse 44813 0
ide_gd_mod 17179 0
ide_cd_mod 21084 0
ide_core 59642 2 ide_gd_mod,ide_cd_mod
snd_pcm 47226 0
snd_timer 12258 1 snd_pcm
snd 34379 2 snd_pcm,snd_timer
i2c_i801 6462 0
soundcore 3450 1 snd
parport_pc 15799 0
snd_page_alloc 5049 1 snd_pcm
parport 22554 1 parport_pc
i2c_core 12791 2 eeprom,i2c_i801
shpchp 21220 0
evdev 5609 0
rng_core 2178 0
serio_raw 2916 0
button 3598 0
pcspkr 1207 0
pci_hotplug 18065 1 shpchp
processor 26335 0
ext3 96408 3
jbd 32185 1 ext3
mbcache 3762 1 ext3
raid1 16375 1
md_mod 67401 2 raid1
sg 15972 0
sr_mod 10770 0
cdrom 26487 2 ide_cd_mod,sr_mod
sd_mod 26009 7
crc_t10dif 1012 1 sd_mod
ata_generic 2067 0
ata_piix 17740 4
fan 2586 0
thermal 9206 0
libata 115773 2 ata_generic,ata_piix
uhci_hcd 16065 0
e100 22325 0
floppy 40923 0
mii 2714 1 e100
thermal_sys 9378 3 processor,fan,thermal
ehci_hcd 28701 0
scsi_mod 101449 4 sg,sr_mod,sd_mod,libata
usbcore 98761 3 uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge [8086:1a30] (rev 04)
Subsystem: Super Micro Computer Inc Supermicro P4SBE Mainboard [15d9:3280]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e3000000 (32-bit, prefetchable) [size=4M]
Capabilities: [e4] Vendor Specific Information: Len=04 <?>
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge [8086:1a31] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e0000000-e2ffffff
Prefetchable memory behind bridge: 40000000-402fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller [8086:244b] (rev 05) (prog-if 80 [Master])
Subsystem: Super Micro Computer Inc Supermicro P4SBE Mainboard [15d9:3280]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: ata_piix
00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2442] (rev 05) (prog-if 00 [UHCI])
Subsystem: Super Micro Computer Inc Device [15d9:3280]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at d000 [size=32]
Kernel driver in use: uhci_hcd
00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller [8086:2443] (rev 05)
Subsystem: Super Micro Computer Inc Supermicro P4SBE Mainboard [15d9:3280]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at 0500 [size=16]
Kernel driver in use: i801_smbus
00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2444] (rev 05) (prog-if 00 [UHCI])
Subsystem: Super Micro Computer Inc Device [15d9:3280]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 12
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
02:06.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Server Adapter (PILA8470B) [8086:100c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e2200000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c000 [size=64]
Region 2: Memory at e2100000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 40000000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
02:07.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Server Adapter (PILA8470B) [8086:100c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e2201000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c400 [size=64]
Region 2: Memory at e2000000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 40100000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
02:08.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Rage XL [1002:0008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at c800 [size=256]
Region 2: Memory at e2202000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 40200000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 6.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-vserver-686 (SMP w/1 CPU core)
Locale: LANG=de_CH, LC_CTYPE=de_CH (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-vserver-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-31 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-vserver-686 recommends:
ii firmware-linux-free 2.6.32-31 Binary firmware for various driver
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-vserver-686 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-vserver-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-vserver-686/postinst/depmod-error-initrd-2.6.32-5-vserver-686: false
linux-image-2.6.32-5-vserver-686/prerm/removing-running-kernel-2.6.32-5-vserver-686: true
linux-image-2.6.32-5-vserver-686/postinst/ignoring-do-bootloader-2.6.32-5-vserver-686:
* linux-image-2.6.32-5-vserver-686/postinst/missing-firmware-2.6.32-5-vserver-686:
Reply to: