Bug#625727: linux-image-2.6.38-2-amd64: Console turns black during boot, backlight turns off
Package: linux-2.6
Version: 2.6.38-3
Severity: important
dist-upgrading testing installed
linux-image-2.6.38-2-amd64_2.6.38-3_amd64.deb. Now when I boot up the
system the screen turns black after the initial 6 lines
Loading, please wait...
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...
and I can log into gdm 'in the dark' but the screen stays black. Even
switching to a different console via Ctrl-Alt-F1 doesn't change
anything.
When I reboot into the old linux-image-2.6.32-5-amd64 everything works
again.
So I tried different kernel versions from snapshot.debian.org and the
last one working is
linux-image-2.6.35-trunk-amd64_2.6.35-1~experimental.3_amd64.deb. The
kernel versions linux-image-2.6.36-trunk-amd64 and
linux-image-2.6.37-2-amd64 show the same behaviour as 2.6.38.
Attached are the dmesg from the working kernel 2.6.32 and 'dark' 2.6.38
Is there anything more I can provide?
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: System manufacturer
product_name: P5E-V HDMI
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0504
board_vendor: ASUSTeK Computer INC.
board_name: P5E-V HDMI
board_version: Rev 1.xx
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G35 Express DRAM Controller [8086:2980] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8295]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2982] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at cc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2983] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6fbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:829f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0000000-f03fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe6fb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at b880 [size=8]
Region 1: I/O ports at b800 [size=4]
Region 2: I/O ports at b480 [size=8]
Region 3: I/O ports at b400 [size=4]
Region 4: I/O ports at b080 [size=32]
Region 5: Memory at fe6fa800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6fb400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
01:00.0 Ethernet controller [0200]: Atheros Communications L1 Gigabit Ethernet [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fe9a0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
02:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
[virtual] Expansion ROM at f0400000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
04:01.0 Network controller [0280]: Ralink corp. RT2500 802.11g [1814:0201] (rev 01)
Subsystem: Ralink corp. Device [1814:2560]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: rt2500pci
04:02.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device [13f6:0111]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e800 [size=256]
Capabilities: <access denied>
Kernel driver in use: C-Media PCI
04:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at febfd800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 03f0:2f24 Hewlett-Packard LP2475w Monitor Hub
Bus 002 Device 002: ID 046d:c01a Logitech, Inc. M-BQ85 Optical Wheel Mouse
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.29 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 7 21:35:22 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=a14350bf-41a0-4f1b-9080-769efa339ee3 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf780000 (usable)
[ 0.000000] BIOS-e820: 00000000cf780000 - 00000000cf78e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf78e000 - 00000000cf7e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf7e0000 - 00000000cf800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 base 0CF800000 mask FFF800000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf780000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf780000 page 4k
[ 0.000000] kernel direct mapping tables up to cf780000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000
[ 0.000000] RAMDISK: 36d14000 - 37681187
[ 0.000000] ACPI: RSDP 00000000000fb630 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cf780100 0005C (v01 A_M_I_ OEMXSDT 06000819 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cf780290 000F4 (v03 A_M_I_ OEMFACP 06000819 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cf7805c0 09984 (v01 A0868 A0868001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cf78e000 00040
[ 0.000000] ACPI: APIC 00000000cf780390 0006C (v01 A_M_I_ OEMAPIC 06000819 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cf780400 0003C (v01 A_M_I_ OEMMCFG 06000819 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cf78e040 00081 (v01 A_M_I_ AMI_OEM 06000819 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cf789f50 00038 (v01 A_M_I_ OEMHPET 06000819 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000cf78e0d0 02024 (v01 A_M_I_ GMCHSCI 06000819 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cf789f90 000B0 (v01 A_M_I_ OEMOSFR 06000819 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [0000000000015000 - 000000000001cfff]
[ 0.000000] bootmap [000000000001d000 - 0000000000042fff] pages 26
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a454] TEXT DATA BSS ==> [0001000000 - 000168a454]
[ 0.000000] #3 [0036d14000 - 0037681187] RAMDISK ==> [0036d14000 - 0037681187]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b280] BRK ==> [000168b000 - 000168b280]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cf780
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1046286
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3821 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831416 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf780000 - 00000000cf78e000
[ 0.000000] PM: Registered nosave memory: 00000000cf78e000 - 00000000cf7e0000
[ 0.000000] PM: Registered nosave memory: 00000000cf7e0000 - 00000000cf800000
[ 0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cf800000 (gap: cf800000:2f600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029157
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=a14350bf-41a0-4f1b-9080-769efa339ee3 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000559e000 - ffff88000959e000
[ 0.000000] software IO TLB at phys 0x559e000 - 0x959e000
[ 0.000000] Memory: 4042536k/4980736k available (3080k kernel code, 795592k absent, 142608k reserved, 1891k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3005.385 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6010.77 BogoMIPS (lpj=12021540)
[ 0.004021] Security Framework initialized
[ 0.004025] SELinux: Disabled at boot.
[ 0.004264] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006022] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008313] Mount-cache hash table entries: 256
[ 0.008432] Initializing cgroup subsys ns
[ 0.008435] Initializing cgroup subsys cpuacct
[ 0.008438] Initializing cgroup subsys devices
[ 0.008440] Initializing cgroup subsys freezer
[ 0.008441] Initializing cgroup subsys net_cls
[ 0.008461] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008463] CPU: L2 cache: 6144K
[ 0.008465] CPU 0/0x0 -> Node 0
[ 0.008467] CPU: Physical Processor ID: 0
[ 0.008468] CPU: Processor Core ID: 0
[ 0.008470] mce: CPU supports 6 MCE banks
[ 0.008476] CPU0: Thermal monitoring enabled (TM2)
[ 0.008479] using mwait in idle threads.
[ 0.008480] Performance Events: Core2 events, Intel PMU driver.
[ 0.008484] ... version: 2
[ 0.008485] ... bit width: 40
[ 0.008486] ... generic registers: 2
[ 0.008487] ... value mask: 000000ffffffffff
[ 0.008488] ... max period: 000000007fffffff
[ 0.008489] ... fixed-purpose events: 3
[ 0.008490] ... event mask: 0000000700000003
[ 0.009268] ACPI: Core revision 20090903
[ 0.016051] Setting APIC routing to flat
[ 0.016345] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056998] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.060001] APIC calibration not consistent with PM-Timer: 115ms instead of 100ms
[ 0.060001] APIC delta adjusted to PM-Timer: 2087188 (2421112)
[ 0.060001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 6144K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.144081] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.144086] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.148014] Brought up 2 CPUs
[ 0.148016] Total of 2 processors activated (12021.87 BogoMIPS).
[ 0.148744] CPU0 attaching sched-domain:
[ 0.148747] domain 0: span 0-1 level MC
[ 0.148748] groups: 0 1
[ 0.148752] CPU1 attaching sched-domain:
[ 0.148753] domain 0: span 0-1 level MC
[ 0.148755] groups: 1 0
[ 0.148802] devtmpfs: initialized
[ 0.150186] regulator: core version 0.5
[ 0.150186] NET: Registered protocol family 16
[ 0.150186] ACPI: bus type pci registered
[ 0.150186] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.150186] PCI: Not using MMCONFIG.
[ 0.150186] PCI: Using configuration type 1 for base access
[ 0.150186] bio: create slab <bio-0> at 0
[ 0.152332] ACPI: EC: Look up EC in DSDT
[ 0.154794] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.162205] ACPI: Interpreter enabled
[ 0.162208] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.162223] ACPI: Using IOAPIC for interrupt routing
[ 0.162261] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.164906] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.172193] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.179601] ACPI Warning: Incorrect checksum in table [OEMB] - F9, should be F4 (20090903/tbutils-314)
[ 0.180272] ACPI: No dock devices found.
[ 0.180357] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.180414] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe700000-0xfe7fffff]
[ 0.180420] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.180423] pci 0000:00:02.0: reg 20 io port: [0xcc00-0xcc07]
[ 0.180444] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.180510] pci 0000:00:1a.0: reg 20 io port: [0xc480-0xc49f]
[ 0.180562] pci 0000:00:1a.1: reg 20 io port: [0xc800-0xc81f]
[ 0.180614] pci 0000:00:1a.2: reg 20 io port: [0xc880-0xc89f]
[ 0.180669] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe6fbc00-0xfe6fbfff]
[ 0.180711] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.180714] pci 0000:00:1a.7: PME# disabled
[ 0.180745] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe6f4000-0xfe6f7fff]
[ 0.180775] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.180777] pci 0000:00:1b.0: PME# disabled
[ 0.180823] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.180826] pci 0000:00:1c.0: PME# disabled
[ 0.180874] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.180877] pci 0000:00:1c.4: PME# disabled
[ 0.180924] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.180926] pci 0000:00:1c.5: PME# disabled
[ 0.180968] pci 0000:00:1d.0: reg 20 io port: [0xc000-0xc01f]
[ 0.181020] pci 0000:00:1d.1: reg 20 io port: [0xc080-0xc09f]
[ 0.181072] pci 0000:00:1d.2: reg 20 io port: [0xc400-0xc41f]
[ 0.181127] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe6fb800-0xfe6fbbff]
[ 0.181169] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.181172] pci 0000:00:1d.7: PME# disabled
[ 0.181267] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.181270] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.181272] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.181322] pci 0000:00:1f.2: reg 10 io port: [0xb880-0xb887]
[ 0.181326] pci 0000:00:1f.2: reg 14 io port: [0xb800-0xb803]
[ 0.181330] pci 0000:00:1f.2: reg 18 io port: [0xb480-0xb487]
[ 0.181334] pci 0000:00:1f.2: reg 1c io port: [0xb400-0xb403]
[ 0.181338] pci 0000:00:1f.2: reg 20 io port: [0xb080-0xb09f]
[ 0.181342] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe6fa800-0xfe6fafff]
[ 0.181364] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.181366] pci 0000:00:1f.2: PME# disabled
[ 0.181388] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe6fb400-0xfe6fb4ff]
[ 0.181397] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.181443] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.181492] pci 0000:02:00.0: reg 10 io port: [0xdc00-0xdc07]
[ 0.181499] pci 0000:02:00.0: reg 14 io port: [0xd880-0xd883]
[ 0.181507] pci 0000:02:00.0: reg 18 io port: [0xd800-0xd807]
[ 0.181514] pci 0000:02:00.0: reg 1c io port: [0xd480-0xd483]
[ 0.181522] pci 0000:02:00.0: reg 20 io port: [0xd400-0xd40f]
[ 0.181535] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.181584] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.181632] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 0.181634] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.181681] pci 0000:01:00.0: reg 10 64bit mmio: [0xfe9c0000-0xfe9fffff]
[ 0.181707] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe9a0000-0xfe9bffff]
[ 0.181735] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.181738] pci 0000:01:00.0: PME# disabled
[ 0.181761] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.181811] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.181841] pci 0000:04:01.0: reg 10 32bit mmio: [0xfebfe000-0xfebfffff]
[ 0.181908] pci 0000:04:02.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.181945] pci 0000:04:02.0: supports D1 D2
[ 0.181976] pci 0000:04:03.0: reg 10 32bit mmio: [0xfebfd800-0xfebfdfff]
[ 0.181982] pci 0000:04:03.0: reg 14 io port: [0xec00-0xec7f]
[ 0.182015] pci 0000:04:03.0: supports D2
[ 0.182017] pci 0000:04:03.0: PME# supported from D2 D3hot D3cold
[ 0.182020] pci 0000:04:03.0: PME# disabled
[ 0.182056] pci 0000:00:1e.0: transparent bridge
[ 0.182059] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.182061] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.182079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.182180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.182260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.182306] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.182354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.195028] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.195110] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.195192] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.195273] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.195354] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.195436] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.195517] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.195598] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.195672] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.195681] vgaarb: loaded
[ 0.195691] PCI: Using ACPI for IRQ routing
[ 0.195691] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.195691] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.195691] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.200020] Switching to clocksource tsc
[ 0.200823] pnp: PnP ACPI init
[ 0.200831] ACPI: bus type pnp registered
[ 0.203833] pnp: PnP ACPI: found 16 devices
[ 0.203834] ACPI: ACPI bus type pnp unregistered
[ 0.203840] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.203856] system 00:06: ioport range 0x290-0x297 has been reserved
[ 0.203860] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.203861] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.203863] system 00:07: ioport range 0x480-0x4bf has been reserved
[ 0.203865] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.203867] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.203869] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.203871] system 00:07: iomem range 0xffa00000-0xffafffff has been reserved
[ 0.203873] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.203875] system 00:07: iomem range 0xffe00000-0xffefffff has been reserved
[ 0.203877] system 00:07: iomem range 0xfff00000-0xfffffffe has been reserved
[ 0.203881] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.203883] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.203887] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.203891] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.203892] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.203894] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.203896] system 00:0f: iomem range 0x100000-0xcf7fffff could not be reserved
[ 0.208541] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.208544] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.208547] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf03fffff
[ 0.208550] pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.208555] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[ 0.208557] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.208560] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.208563] pci 0000:00:1c.4: PREFETCH window: 0xf0400000-0xf05fffff
[ 0.208567] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01
[ 0.208569] pci 0000:00:1c.5: IO window: 0x2000-0x2fff
[ 0.208572] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
[ 0.208575] pci 0000:00:1c.5: PREFETCH window: 0x000000f0600000-0x000000f07fffff
[ 0.208580] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.208582] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.208585] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.208588] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.208596] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.208599] alloc irq_desc for 17 on node -1
[ 0.208600] alloc kstat_irqs on node -1
[ 0.208604] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.208607] pci 0000:00:1c.0: setting latency timer to 64
[ 0.208612] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.208615] pci 0000:00:1c.4: setting latency timer to 64
[ 0.208620] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.208622] alloc irq_desc for 16 on node -1
[ 0.208623] alloc kstat_irqs on node -1
[ 0.208626] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.208628] pci 0000:00:1c.5: setting latency timer to 64
[ 0.208632] pci 0000:00:1e.0: setting latency timer to 64
[ 0.208635] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.208637] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.208638] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.208640] pci_bus 0000:03: resource 1 mem: [0xf0000000-0xf03fffff]
[ 0.208642] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.208643] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.208645] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.208646] pci_bus 0000:02: resource 2 pref mem [0xf0400000-0xf05fffff]
[ 0.208648] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.208649] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.208651] pci_bus 0000:01: resource 2 pref mem [0xf0600000-0xf07fffff]
[ 0.208653] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.208654] pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.208656] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.208657] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.208675] NET: Registered protocol family 2
[ 0.208786] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.209804] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.212464] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.212876] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.212878] TCP reno registered
[ 0.212980] NET: Registered protocol family 1
[ 0.212997] pci 0000:00:02.0: Boot video device
[ 0.213152] Unpacking initramfs...
[ 0.382601] Freeing initrd memory: 9652k freed
[ 0.386526] audit: initializing netlink socket (disabled)
[ 0.386538] type=2000 audit(1304596663.383:1): initialized
[ 0.388716] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.389723] VFS: Disk quotas dquot_6.5.2
[ 0.389759] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.389823] msgmni has been set to 7914
[ 0.389959] alg: No test for stdrng (krng)
[ 0.389992] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.389994] io scheduler noop registered
[ 0.389995] io scheduler anticipatory registered
[ 0.389997] io scheduler deadline registered
[ 0.390019] io scheduler cfq registered (default)
[ 0.390107] alloc irq_desc for 24 on node -1
[ 0.390108] alloc kstat_irqs on node -1
[ 0.390117] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.390123] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.390203] alloc irq_desc for 25 on node -1
[ 0.390204] alloc kstat_irqs on node -1
[ 0.390209] pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X
[ 0.390214] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.390295] alloc irq_desc for 26 on node -1
[ 0.390296] alloc kstat_irqs on node -1
[ 0.390300] pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 0.390306] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.391362] Linux agpgart interface v0.103
[ 0.391371] agpgart-intel 0000:00:00.0: Intel G35 Chipset
[ 0.392691] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 0.396941] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.396976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.397061] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.397313] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.397430] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.397476] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.400354] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.400358] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.400413] mice: PS/2 mouse device common for all mice
[ 0.400440] rtc_cmos 00:03: RTC can wake from S4
[ 0.400468] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.400488] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.400498] cpuidle: using governor ladder
[ 0.400499] cpuidle: using governor menu
[ 0.400502] No iBFT detected.
[ 0.400716] TCP cubic registered
[ 0.400794] NET: Registered protocol family 10
[ 0.401298] Mobile IPv6
[ 0.401300] NET: Registered protocol family 17
[ 0.401359] PM: Resume from disk failed.
[ 0.401367] registered taskstats version 1
[ 0.401684] rtc_cmos 00:03: setting system clock to 2011-05-05 11:57:43 UTC (1304596663)
[ 0.401705] Initalizing network drop monitor service
[ 0.401719] Freeing unused kernel memory: 592k freed
[ 0.401850] Write protecting the kernel read-only data: 4236k
[ 0.419332] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.447908] udev[59]: starting version 166
[ 0.531065] usbcore: registered new interface driver usbfs
[ 0.531082] usbcore: registered new interface driver hub
[ 0.531101] usbcore: registered new device driver usb
[ 0.532435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.532463] alloc irq_desc for 18 on node -1
[ 0.532464] alloc kstat_irqs on node -1
[ 0.532470] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.532495] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.532497] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.532512] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.532546] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.533432] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.536439] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.537296] SCSI subsystem initialized
[ 0.537332] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe6fbc00
[ 0.547023] libata version 3.00 loaded.
[ 0.547646] pata_jmicron 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.547667] pata_jmicron 0000:02:00.0: setting latency timer to 64
[ 0.547707] scsi0 : pata_jmicron
[ 0.547758] scsi1 : pata_jmicron
[ 0.548364] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[ 0.548366] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[ 0.549323] atl1 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.549329] atl1 0000:01:00.0: setting latency timer to 64
[ 0.549355] atl1 0000:01:00.0: version 2.1.3
[ 0.550149] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.551891] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.551915] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.551917] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.551919] usb usb1: Product: EHCI Host Controller
[ 0.551920] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.551921] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.551972] usb usb1: configuration #1 chosen from 1 choice
[ 0.551993] hub 1-0:1.0: USB hub found
[ 0.551998] hub 1-0:1.0: 6 ports detected
[ 0.552079] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.552083] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.552086] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.552091] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 0.552111] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c480
[ 0.552137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.552139] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.552140] usb usb2: Product: UHCI Host Controller
[ 0.552142] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.552143] usb usb2: SerialNumber: 0000:00:1a.0
[ 0.552182] usb usb2: configuration #1 chosen from 1 choice
[ 0.552201] hub 2-0:1.0: USB hub found
[ 0.552205] hub 2-0:1.0: 2 ports detected
[ 0.552293] alloc irq_desc for 23 on node -1
[ 0.552294] alloc kstat_irqs on node -1
[ 0.552299] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.552309] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.552311] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.552317] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 0.552343] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.556216] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.556226] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe6fb800
[ 0.571878] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.571893] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.571895] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.571897] usb usb3: Product: EHCI Host Controller
[ 0.571899] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.571901] usb usb3: SerialNumber: 0000:00:1d.7
[ 0.571959] usb usb3: configuration #1 chosen from 1 choice
[ 0.571990] hub 3-0:1.0: USB hub found
[ 0.571995] hub 3-0:1.0: 6 ports detected
[ 0.572035] alloc irq_desc for 21 on node -1
[ 0.572037] alloc kstat_irqs on node -1
[ 0.572040] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.572044] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.572046] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.572051] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.572075] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
[ 0.572097] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.572099] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.572100] usb usb4: Product: UHCI Host Controller
[ 0.572101] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.572102] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.572140] usb usb4: configuration #1 chosen from 1 choice
[ 0.572158] hub 4-0:1.0: USB hub found
[ 0.572162] hub 4-0:1.0: 2 ports detected
[ 0.572193] ahci 0000:00:1f.2: version 3.0
[ 0.572200] alloc irq_desc for 22 on node -1
[ 0.572201] alloc kstat_irqs on node -1
[ 0.572205] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.572223] alloc irq_desc for 27 on node -1
[ 0.572224] alloc kstat_irqs on node -1
[ 0.572230] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 0.572263] ahci: SSS flag set, parallel bus scan disabled
[ 0.572289] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.572291] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 0.572294] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.611913] scsi2 : ahci
[ 0.611978] scsi3 : ahci
[ 0.612025] scsi4 : ahci
[ 0.612063] scsi5 : ahci
[ 0.612103] scsi6 : ahci
[ 0.612140] scsi7 : ahci
[ 0.612253] ata3: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6fa900 irq 27
[ 0.612255] ata4: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6fa980 irq 27
[ 0.612257] ata5: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6faa00 irq 27
[ 0.612259] ata6: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6faa80 irq 27
[ 0.612260] ata7: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6fab00 irq 27
[ 0.612262] ata8: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6fab80 irq 27
[ 0.612288] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.612292] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.612294] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.612299] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.612319] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c880
[ 0.612343] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.612344] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.612346] usb usb5: Product: UHCI Host Controller
[ 0.612347] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.612348] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.612386] usb usb5: configuration #1 chosen from 1 choice
[ 0.612403] hub 5-0:1.0: USB hub found
[ 0.612407] hub 5-0:1.0: 2 ports detected
[ 0.612440] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.612444] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.612446] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.612451] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.612469] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c000
[ 0.612491] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.612492] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.612494] usb usb6: Product: UHCI Host Controller
[ 0.612495] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.612496] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.612532] usb usb6: configuration #1 chosen from 1 choice
[ 0.612549] hub 6-0:1.0: USB hub found
[ 0.612553] hub 6-0:1.0: 2 ports detected
[ 0.612582] alloc irq_desc for 19 on node -1
[ 0.612584] alloc kstat_irqs on node -1
[ 0.612587] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.612590] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.612592] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.612597] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.612620] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
[ 0.612642] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.612644] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.612645] usb usb7: Product: UHCI Host Controller
[ 0.612646] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.612647] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.612686] usb usb7: configuration #1 chosen from 1 choice
[ 0.612706] hub 7-0:1.0: USB hub found
[ 0.612710] hub 7-0:1.0: 2 ports detected
[ 0.612739] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.612743] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.612745] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.612751] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.612769] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
[ 0.612789] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.612791] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.612792] usb usb8: Product: UHCI Host Controller
[ 0.612793] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.612795] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.612830] usb usb8: configuration #1 chosen from 1 choice
[ 0.612847] hub 8-0:1.0: USB hub found
[ 0.612850] hub 8-0:1.0: 2 ports detected
[ 0.627881] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.10
[ 0.920009] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 1.052422] usb 1-6: New USB device found, idVendor=03f0, idProduct=2f24
[ 1.052425] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.052486] usb 1-6: configuration #1 chosen from 1 choice
[ 1.052574] hub 1-6:1.0: USB hub found
[ 1.052667] hub 1-6:1.0: 6 ports detected
[ 1.096011] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.097228] ata3.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
[ 1.097231] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.098530] ata3.00: configured for UDMA/133
[ 1.112101] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
[ 1.128064] firewire_core: created device fw0: GUID 001e8c00014b89d6, S400
[ 1.292008] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 1.432012] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.472193] usb 2-1: New USB device found, idVendor=046d, idProduct=c01a
[ 1.472196] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.472198] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 1.472200] usb 2-1: Manufacturer: Logitech
[ 1.472253] usb 2-1: configuration #1 chosen from 1 choice
[ 1.768011] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.104512] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.012010] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.014540] ata7.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
[ 3.018305] ata7.00: configured for UDMA/100
[ 3.142823] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5
[ 3.460512] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.481995] usbcore: registered new interface driver hiddev
[ 3.485275] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.485313] sd 2:0:0:0: [sda] Write Protect is off
[ 3.485314] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.485331] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.485423] sda:
[ 3.494479] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1:1.0/input/input2
[ 3.494526] generic-usb 0003:046D:C01A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1/input0
[ 3.494542] usbcore: registered new interface driver usbhid
[ 3.494544] usbhid: v2.6:USB HID core driver
[ 3.523404] sda1 sda2 sda3 sda4 sda5
[ 3.523654] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.820727] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.820730] Uniform CD-ROM driver Revision: 3.20
[ 3.820824] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 3.823231] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.823254] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 4.611892] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 5.774529] <30>udev[525]: converting old udev database
[ 5.789809] <30>udev[526]: starting version 167
[ 6.003399] ACPI: SSDT 00000000cf790100 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 6.003737] processor LNXCPU:00: registered as cooling_device0
[ 6.003967] ACPI: SSDT 00000000cf7902e0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 6.005176] processor LNXCPU:01: registered as cooling_device1
[ 6.008027] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 6.008033] ACPI: Power Button [PWRB]
[ 6.008078] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.008080] ACPI: Power Button [PWRF]
[ 6.061902] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.223649] [drm] Initialized drm 1.1.0 20060810
[ 6.336695] parport_pc 00:0a: reported by Plug and Play ACPI
[ 6.336793] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 6.530078] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.530082] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[ 6.530123] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.530206] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.530209] i915 0000:00:02.0: setting latency timer to 64
[ 6.541463] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 6.541466] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 6.541508] alloc irq_desc for 28 on node -1
[ 6.541510] alloc kstat_irqs on node -1
[ 6.541517] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 6.541521] [drm] set up 7M of stolen space
[ 6.793957] cfg80211: Using static regulatory domain info
[ 6.793959] cfg80211: Regulatory domain: US
[ 6.793960] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.793962] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 6.793964] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.793965] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.793967] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.793969] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.793970] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 6.794139] cfg80211: Calling CRDA for country: US
[ 6.891772] [drm] initialized overlay support
[ 6.908418] C-Media PCI 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.035194] rt2500pci 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.170467] phy0: Selected rate control algorithm 'minstrel'
[ 7.170904] Registered led device: rt2500pci-phy0::radio
[ 7.170917] Registered led device: rt2500pci-phy0::quality
[ 7.467374] Console: switching to colour frame buffer device 240x75
[ 7.471809] fb0: inteldrmfb frame buffer device
[ 7.471811] registered panic notifier
[ 7.471881] No ACPI video bus found
[ 7.471956] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.471987] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.472028] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.591457] hda_codec: ALC883: BIOS auto-probing.
[ 7.592791] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 8.126509] device-mapper: uevent: version 1.0.3
[ 8.126684] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 15.840210] padlock: VIA PadLock not detected.
[ 16.264484] padlock: VIA PadLock Hash Engine not detected.
[ 16.887509] loop: module loaded
[ 16.949167] Adding 10485752k swap on /dev/mapper/cswap. Priority:-1 extents:1 across:10485752k
[ 17.554089] EXT4-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
[ 17.581087] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 18.298538] RPC: Registered udp transport module.
[ 18.298540] RPC: Registered tcp transport module.
[ 18.298541] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 18.334398] Slow work thread pool: Starting up
[ 18.334424] Slow work thread pool: Ready
[ 18.334454] FS-Cache: Loaded
[ 18.354441] FS-Cache: Netfs 'nfs' registered for caching
[ 18.363036] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 18.632225] fuse init (API version 7.13)
[ 21.173832] alloc irq_desc for 29 on node -1
[ 21.173834] alloc kstat_irqs on node -1
[ 21.173846] atl1 0000:01:00.0: irq 29 for MSI/MSI-X
[ 21.173918] atl1 0000:01:00.0: eth0 link is up 100 Mbps full duplex
[ 21.237102] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.524847] Bluetooth: Core ver 2.15
[ 22.524879] NET: Registered protocol family 31
[ 22.524880] Bluetooth: HCI device and connection manager initialized
[ 22.524882] Bluetooth: HCI socket layer initialized
[ 22.563081] Bluetooth: L2CAP ver 2.14
[ 22.563083] Bluetooth: L2CAP socket layer initialized
[ 22.578279] Bluetooth: RFCOMM TTY layer initialized
[ 22.578282] Bluetooth: RFCOMM socket layer initialized
[ 22.578283] Bluetooth: RFCOMM ver 1.11
[ 22.587722] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.587723] Bluetooth: BNEP filters: protocol multicast
[ 22.658425] Bluetooth: SCO (Voice Link) ver 0.6
[ 22.658426] Bluetooth: SCO socket layer initialized
[ 26.840790] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.924005] eth0: no IPv6 routers present
[ 34.372288] CPU0 attaching NULL sched-domain.
[ 34.372292] CPU1 attaching NULL sched-domain.
[ 34.400067] CPU0 attaching sched-domain:
[ 34.400070] domain 0: span 0-1 level MC
[ 34.400072] groups: 0 1
[ 34.400077] CPU1 attaching sched-domain:
[ 34.400079] domain 0: span 0-1 level MC
[ 34.400081] groups: 1 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=a14350bf-41a0-4f1b-9080-769efa339ee3 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf780000 (usable)
[ 0.000000] BIOS-e820: 00000000cf780000 - 00000000cf78e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf78e000 - 00000000cf7e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf7e0000 - 00000000cf800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer P5E-V HDMI/P5E-V HDMI, BIOS 0504 06/19/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 base 0CF800000 mask FFF800000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf780000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf780000 page 4k
[ 0.000000] kernel direct mapping tables up to cf780000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ cf77a000-cf780000
[ 0.000000] RAMDISK: 36b76000 - 375b3000
[ 0.000000] ACPI: RSDP 00000000000fb630 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cf780100 0005C (v01 A_M_I_ OEMXSDT 06000819 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cf780290 000F4 (v03 A_M_I_ OEMFACP 06000819 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cf7805c0 09984 (v01 A0868 A0868001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cf78e000 00040
[ 0.000000] ACPI: APIC 00000000cf780390 0006C (v01 A_M_I_ OEMAPIC 06000819 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cf780400 0003C (v01 A_M_I_ OEMMCFG 06000819 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cf78e040 00081 (v01 A_M_I_ AMI_OEM 06000819 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cf789f50 00038 (v01 A_M_I_ OEMHPET 06000819 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000cf78e0d0 02024 (v01 A_M_I_ GMCHSCI 06000819 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cf789f90 000B0 (v01 A_M_I_ OEMOSFR 06000819 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cf780
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1046286
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831416 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf780000 - 00000000cf78e000
[ 0.000000] PM: Registered nosave memory: 00000000cf78e000 - 00000000cf7e0000
[ 0.000000] PM: Registered nosave memory: 00000000cf7e0000 - 00000000cf800000
[ 0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cf800000 (gap: cf800000:2f600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cf400000 s82752 r8192 d23744 u524288
[ 0.000000] pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029256
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=a14350bf-41a0-4f1b-9080-769efa339ee3 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4040196k/4980736k available (3259k kernel code, 795592k absent, 144948k reserved, 3426k data, 676k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 1 loops
[ 0.000000] Detected 3005.553 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6011.10 BogoMIPS (lpj=12022212)
[ 0.008007] pid_max: default: 32768 minimum: 301
[ 0.008026] Security Framework initialized
[ 0.008030] SELinux: Disabled at boot.
[ 0.008278] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010016] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010832] Mount-cache hash table entries: 256
[ 0.010955] Initializing cgroup subsys ns
[ 0.010958] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.010960] Initializing cgroup subsys cpuacct
[ 0.010964] Initializing cgroup subsys devices
[ 0.010965] Initializing cgroup subsys freezer
[ 0.010967] Initializing cgroup subsys net_cls
[ 0.010968] Initializing cgroup subsys blkio
[ 0.011000] CPU: Physical Processor ID: 0
[ 0.011001] CPU: Processor Core ID: 0
[ 0.012009] mce: CPU supports 6 MCE banks
[ 0.012014] CPU0: Thermal monitoring enabled (TM2)
[ 0.012017] using mwait in idle threads.
[ 0.012832] ACPI: Core revision 20110112
[ 0.016047] Setting APIC routing to flat
[ 0.016339] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056427] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1
[ 0.148029] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148059] Brought up 2 CPUs
[ 0.148061] Total of 2 processors activated (14880.25 BogoMIPS).
[ 0.148797] devtmpfs: initialized
[ 0.150567] print_constraints: dummy:
[ 0.150567] NET: Registered protocol family 16
[ 0.150567] ACPI: bus type pci registered
[ 0.150567] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.150567] PCI: not using MMCONFIG
[ 0.150567] PCI: Using configuration type 1 for base access
[ 0.152031] bio: create slab <bio-0> at 0
[ 0.152840] ACPI: EC: Look up EC in DSDT
[ 0.153792] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.158383] ACPI: SSDT 00000000cf790100 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.158585] ACPI: Dynamic OEM Table Load:
[ 0.158587] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.158714] ACPI: SSDT 00000000cf7902e0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.158910] ACPI: Dynamic OEM Table Load:
[ 0.158912] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.159101] ACPI: Interpreter enabled
[ 0.159103] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.159119] ACPI: Using IOAPIC for interrupt routing
[ 0.159134] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.159630] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.180983] ACPI: No dock devices found.
[ 0.180985] HEST: Table not found.
[ 0.180987] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.181034] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.181139] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.181141] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.181143] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.181145] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.181147] pci_root PNP0A08:00: host bridge window [mem 0xcf800000-0xffffffff]
[ 0.181156] pci 0000:00:00.0: [8086:2980] type 0 class 0x000600
[ 0.181183] pci 0000:00:02.0: [8086:2982] type 0 class 0x000300
[ 0.181190] pci 0000:00:02.0: reg 10: [mem 0xfe700000-0xfe7fffff]
[ 0.181197] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.181201] pci 0000:00:02.0: reg 20: [io 0xcc00-0xcc07]
[ 0.181220] pci 0000:00:02.1: [8086:2983] type 0 class 0x000380
[ 0.181226] pci 0000:00:02.1: reg 10: [mem 0xfe800000-0xfe8fffff]
[ 0.181274] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.181306] pci 0000:00:1a.0: reg 20: [io 0xc480-0xc49f]
[ 0.181340] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.181373] pci 0000:00:1a.1: reg 20: [io 0xc800-0xc81f]
[ 0.181407] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.181440] pci 0000:00:1a.2: reg 20: [io 0xc880-0xc89f]
[ 0.181482] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.181498] pci 0000:00:1a.7: reg 10: [mem 0xfe6fbc00-0xfe6fbfff]
[ 0.181556] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.181559] pci 0000:00:1a.7: PME# disabled
[ 0.181577] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.181588] pci 0000:00:1b.0: reg 10: [mem 0xfe6f4000-0xfe6f7fff 64bit]
[ 0.181629] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.181631] pci 0000:00:1b.0: PME# disabled
[ 0.181647] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.181687] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.181689] pci 0000:00:1c.0: PME# disabled
[ 0.181708] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.181748] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.181751] pci 0000:00:1c.4: PME# disabled
[ 0.181767] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[ 0.181807] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.181810] pci 0000:00:1c.5: PME# disabled
[ 0.181828] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.181860] pci 0000:00:1d.0: reg 20: [io 0xc000-0xc01f]
[ 0.181894] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.181927] pci 0000:00:1d.1: reg 20: [io 0xc080-0xc09f]
[ 0.181961] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.181993] pci 0000:00:1d.2: reg 20: [io 0xc400-0xc41f]
[ 0.182036] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.182052] pci 0000:00:1d.7: reg 10: [mem 0xfe6fb800-0xfe6fbbff]
[ 0.182109] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.182113] pci 0000:00:1d.7: PME# disabled
[ 0.182128] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.182171] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
[ 0.182237] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.182270] pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106
[ 0.182284] pci 0000:00:1f.2: reg 10: [io 0xb880-0xb887]
[ 0.182290] pci 0000:00:1f.2: reg 14: [io 0xb800-0xb803]
[ 0.182296] pci 0000:00:1f.2: reg 18: [io 0xb480-0xb487]
[ 0.182301] pci 0000:00:1f.2: reg 1c: [io 0xb400-0xb403]
[ 0.182307] pci 0000:00:1f.2: reg 20: [io 0xb080-0xb09f]
[ 0.182313] pci 0000:00:1f.2: reg 24: [mem 0xfe6fa800-0xfe6fafff]
[ 0.182337] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.182340] pci 0000:00:1f.2: PME# disabled
[ 0.182353] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.182364] pci 0000:00:1f.3: reg 10: [mem 0xfe6fb400-0xfe6fb4ff 64bit]
[ 0.182380] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.182426] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.182429] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.182432] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.182437] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.182483] pci 0000:02:00.0: [197b:2368] type 0 class 0x000101
[ 0.182508] pci 0000:02:00.0: reg 10: [io 0xdc00-0xdc07]
[ 0.182520] pci 0000:02:00.0: reg 14: [io 0xd880-0xd883]
[ 0.182532] pci 0000:02:00.0: reg 18: [io 0xd800-0xd807]
[ 0.182544] pci 0000:02:00.0: reg 1c: [io 0xd480-0xd483]
[ 0.182555] pci 0000:02:00.0: reg 20: [io 0xd400-0xd40f]
[ 0.182577] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.182619] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.182628] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.182631] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.182634] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.182638] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.182683] pci 0000:01:00.0: [1969:1048] type 0 class 0x000200
[ 0.182701] pci 0000:01:00.0: reg 10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[ 0.182746] pci 0000:01:00.0: reg 30: [mem 0xfe9a0000-0xfe9bffff pref]
[ 0.182774] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.182778] pci 0000:01:00.0: PME# disabled
[ 0.182792] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.182800] pci 0000:00:1c.5: PCI bridge to [bus 01-01]
[ 0.182803] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
[ 0.182806] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.182810] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.182836] pci 0000:04:01.0: [1814:0201] type 0 class 0x000280
[ 0.182849] pci 0000:04:01.0: reg 10: [mem 0xfebfe000-0xfebfffff]
[ 0.182917] pci 0000:04:02.0: [13f6:0111] type 0 class 0x000401
[ 0.182931] pci 0000:04:02.0: reg 10: [io 0xe800-0xe8ff]
[ 0.182986] pci 0000:04:02.0: supports D1 D2
[ 0.183000] pci 0000:04:03.0: [1106:3044] type 0 class 0x000c00
[ 0.183014] pci 0000:04:03.0: reg 10: [mem 0xfebfd800-0xfebfdfff]
[ 0.183022] pci 0000:04:03.0: reg 14: [io 0xec00-0xec7f]
[ 0.183070] pci 0000:04:03.0: supports D2
[ 0.183072] pci 0000:04:03.0: PME# supported from D2 D3hot D3cold
[ 0.183075] pci 0000:04:03.0: PME# disabled
[ 0.183108] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.183111] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.183114] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.183118] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.183120] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.183122] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.183124] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.183125] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.183127] pci 0000:00:1e.0: bridge window [mem 0xcf800000-0xffffffff] (subtractive decode)
[ 0.183142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.183222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.183282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.183309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.183338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.183379] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.190003] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.190038] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.190071] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.190104] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.190138] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.190171] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.190205] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.190238] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.190315] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.190324] vgaarb: loaded
[ 0.190354] PCI: Using ACPI for IRQ routing
[ 0.190356] PCI: pci_cache_line_size set to 64 bytes
[ 0.190419] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.190424] reserve RAM buffer: 00000000cf780000 - 00000000cfffffff
[ 0.190506] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.190510] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.190513] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.196028] Switching to clocksource hpet
[ 0.197000] pnp: PnP ACPI init
[ 0.197010] ACPI: bus type pnp registered
[ 0.197058] pnp 00:00: [bus 00-ff]
[ 0.197060] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.197061] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.197063] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.197064] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.197066] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.197068] pnp 00:00: [mem 0xcf800000-0xffffffff window]
[ 0.197104] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.197111] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.197143] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.197146] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.197167] pnp 00:02: [dma 4]
[ 0.197169] pnp 00:02: [io 0x0000-0x000f]
[ 0.197170] pnp 00:02: [io 0x0081-0x0083]
[ 0.197171] pnp 00:02: [io 0x0087]
[ 0.197173] pnp 00:02: [io 0x0089-0x008b]
[ 0.197176] pnp 00:02: [io 0x008f]
[ 0.197177] pnp 00:02: [io 0x00c0-0x00df]
[ 0.197198] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.197206] pnp 00:03: [io 0x0070-0x0071]
[ 0.197212] pnp 00:03: [irq 8]
[ 0.197232] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.197238] pnp 00:04: [io 0x0061]
[ 0.197260] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.197267] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.197270] pnp 00:05: [irq 13]
[ 0.197291] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.197404] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.197405] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.197407] pnp 00:06: [io 0x0290-0x0297]
[ 0.197441] system 00:06: [io 0x0290-0x0297] has been reserved
[ 0.197444] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.197515] pnp 00:07: [io 0x0010-0x001f]
[ 0.197516] pnp 00:07: [io 0x0022-0x003f]
[ 0.197518] pnp 00:07: [io 0x0044-0x004d]
[ 0.197519] pnp 00:07: [io 0x0050-0x005f]
[ 0.197520] pnp 00:07: [io 0x0062-0x0063]
[ 0.197521] pnp 00:07: [io 0x0065-0x006f]
[ 0.197523] pnp 00:07: [io 0x0072-0x007f]
[ 0.197524] pnp 00:07: [io 0x0080]
[ 0.197525] pnp 00:07: [io 0x0084-0x0086]
[ 0.197526] pnp 00:07: [io 0x0088]
[ 0.197527] pnp 00:07: [io 0x008c-0x008e]
[ 0.197529] pnp 00:07: [io 0x0090-0x009f]
[ 0.197530] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.197531] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.197532] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.197534] pnp 00:07: [io 0x0800-0x087f]
[ 0.197535] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.197536] pnp 00:07: [io 0x0480-0x04bf]
[ 0.197538] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.197539] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.197541] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.197542] pnp 00:07: [mem 0xffa00000-0xffafffff]
[ 0.197543] pnp 00:07: [mem 0xffb00000-0xffbfffff]
[ 0.197545] pnp 00:07: [mem 0xffe00000-0xffefffff]
[ 0.197546] pnp 00:07: [mem 0xfff00000-0xfffffffe]
[ 0.197603] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.197605] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.197606] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.197609] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.197611] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.197613] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.197615] system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.197617] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.197619] system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
[ 0.197621] system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.197623] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.197669] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.197691] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.197882] pnp 00:09: [irq 4]
[ 0.197884] pnp 00:09: [dma 0 disabled]
[ 0.197885] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.197935] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.198217] pnp 00:0a: [irq 7]
[ 0.198218] pnp 00:0a: [dma 3]
[ 0.198220] pnp 00:0a: [io 0x0378-0x037f]
[ 0.198221] pnp 00:0a: [io 0x0778-0x077f]
[ 0.198334] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.198367] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.198369] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.198406] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.198408] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.198410] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198431] pnp 00:0c: [io 0x0060]
[ 0.198433] pnp 00:0c: [io 0x0064]
[ 0.198436] pnp 00:0c: [irq 1]
[ 0.198460] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.198492] pnp 00:0d: [irq 12]
[ 0.198519] pnp 00:0d: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.198543] pnp 00:0e: [mem 0xe0000000-0xefffffff]
[ 0.198578] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.198580] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198916] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.198918] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[ 0.198919] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[ 0.198921] pnp 00:0f: [mem 0x00100000-0xcf7fffff]
[ 0.198922] pnp 00:0f: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.198968] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.198971] system 00:0f: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.198973] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.198975] system 00:0f: [mem 0x00100000-0xcf7fffff] could not be reserved
[ 0.198977] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.199070] pnp: PnP ACPI: found 16 devices
[ 0.199071] ACPI: ACPI bus type pnp unregistered
[ 0.199846] Switched to NOHz mode on CPU #0
[ 0.199969] Switched to NOHz mode on CPU #1
[ 0.207225] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf800000-0xcfbfffff]
[ 0.207228] pci 0000:00:1c.4: BAR 15: assigned [mem 0xcfc00000-0xcfdfffff pref]
[ 0.207231] pci 0000:00:1c.5: BAR 15: assigned [mem 0xcfe00000-0xcfffffff 64bit pref]
[ 0.207233] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.207235] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.207237] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.207239] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.207243] pci 0000:00:1c.0: bridge window [mem 0xcf800000-0xcfbfffff]
[ 0.207246] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.207251] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfc00000-0xcfc0ffff pref]
[ 0.207253] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.207255] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.207259] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.207262] pci 0000:00:1c.4: bridge window [mem 0xcfc00000-0xcfdfffff pref]
[ 0.207266] pci 0000:00:1c.5: PCI bridge to [bus 01-01]
[ 0.207268] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.207272] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.207275] pci 0000:00:1c.5: bridge window [mem 0xcfe00000-0xcfffffff 64bit pref]
[ 0.207280] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.207282] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.207285] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.207288] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.207295] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.207303] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.207306] pci 0000:00:1c.0: setting latency timer to 64
[ 0.207310] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.207313] pci 0000:00:1c.4: setting latency timer to 64
[ 0.207317] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.207322] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.207325] pci 0000:00:1c.5: setting latency timer to 64
[ 0.207329] pci 0000:00:1e.0: setting latency timer to 64
[ 0.207331] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.207333] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.207335] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.207336] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.207338] pci_bus 0000:00: resource 8 [mem 0xcf800000-0xffffffff]
[ 0.207339] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.207341] pci_bus 0000:03: resource 1 [mem 0xcf800000-0xcfbfffff]
[ 0.207343] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.207344] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.207346] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.207347] pci_bus 0000:02: resource 2 [mem 0xcfc00000-0xcfdfffff pref]
[ 0.207349] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.207351] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.207352] pci_bus 0000:01: resource 2 [mem 0xcfe00000-0xcfffffff 64bit pref]
[ 0.207354] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.207356] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.207357] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.207359] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.207360] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.207362] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.207363] pci_bus 0000:04: resource 8 [mem 0xcf800000-0xffffffff]
[ 0.207383] NET: Registered protocol family 2
[ 0.207476] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.208212] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.210961] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.211370] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.211372] TCP reno registered
[ 0.211379] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.211410] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.211539] NET: Registered protocol family 1
[ 0.211554] pci 0000:00:02.0: Boot video device
[ 0.211707] PCI: CLS 32 bytes, default 64
[ 0.211747] Unpacking initramfs...
[ 0.392562] Freeing initrd memory: 10484k freed
[ 0.395402] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.395405] Placing 64MB software IO TLB between ffff8800cb400000 - ffff8800cf400000
[ 0.395407] software IO TLB at phys 0xcb400000 - 0xcf400000
[ 0.395743] audit: initializing netlink socket (disabled)
[ 0.395753] type=2000 audit(1304596789.388:1): initialized
[ 0.402066] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.403808] VFS: Disk quotas dquot_6.5.2
[ 0.403851] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.403918] msgmni has been set to 7911
[ 0.404058] alg: No test for stdrng (krng)
[ 0.404095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.404099] io scheduler noop registered
[ 0.404100] io scheduler deadline registered
[ 0.404124] io scheduler cfq registered (default)
[ 0.404189] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.404223] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.404271] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.404297] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 0.404341] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.404368] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.404495] ERST: Table is not found!
[ 0.404539] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.434294] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.480538] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.480774] Linux agpgart interface v0.103
[ 0.480827] agpgart-intel 0000:00:00.0: Intel G35 Chipset
[ 0.480878] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.482161] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.482256] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.482390] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.485353] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.485358] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.485455] mousedev: PS/2 mouse device common for all mice
[ 0.485489] rtc_cmos 00:03: RTC can wake from S4
[ 0.485540] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.485560] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.485569] cpuidle: using governor ladder
[ 0.485570] cpuidle: using governor menu
[ 0.485730] TCP cubic registered
[ 0.485816] NET: Registered protocol family 10
[ 0.486169] Mobile IPv6
[ 0.486171] NET: Registered protocol family 17
[ 0.486174] Registering the dns_resolver key type
[ 0.486254] PM: Hibernation image not present or could not be loaded.
[ 0.486263] registered taskstats version 1
[ 0.486680] rtc_cmos 00:03: setting system clock to 2011-05-05 11:59:49 UTC (1304596789)
[ 0.486699] Initalizing network drop monitor service
[ 0.487835] Freeing unused kernel memory: 676k freed
[ 0.487944] Write protecting the kernel read-only data: 6144k
[ 0.490304] Freeing unused kernel memory: 820k freed
[ 0.492613] Freeing unused kernel memory: 776k freed
[ 0.512071] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.541484] <30>udev[54]: starting version 167
[ 0.654771] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.654836] atl1 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.654842] atl1 0000:01:00.0: setting latency timer to 64
[ 0.654871] atl1 0000:01:00.0: version 2.1.3
[ 0.655217] usbcore: registered new interface driver usbfs
[ 0.655312] usbcore: registered new interface driver hub
[ 0.655658] usbcore: registered new device driver usb
[ 0.656254] SCSI subsystem initialized
[ 0.657456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.657478] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.657487] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.657489] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.657505] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.669558] libata version 3.00 loaded.
[ 0.676047] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.679936] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.679949] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe6fbc00
[ 0.692781] pata_jmicron 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.692802] pata_jmicron 0000:02:00.0: setting latency timer to 64
[ 0.692842] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.692871] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.692873] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.692874] usb usb1: Product: EHCI Host Controller
[ 0.692876] usb usb1: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[ 0.692877] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.693004] hub 1-0:1.0: USB hub found
[ 0.693008] hub 1-0:1.0: 6 ports detected
[ 0.693069] ahci 0000:00:1f.2: version 3.0
[ 0.693079] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.693105] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.693136] ahci: SSS flag set, parallel bus scan disabled
[ 0.693161] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.693164] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 0.693167] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.693190] scsi0 : pata_jmicron
[ 0.693286] scsi1 : pata_jmicron
[ 0.693678] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[ 0.693680] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[ 0.728049] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 0.732575] scsi2 : ahci
[ 0.732631] scsi3 : ahci
[ 0.732689] scsi4 : ahci
[ 0.732744] scsi5 : ahci
[ 0.732800] scsi6 : ahci
[ 0.732859] scsi7 : ahci
[ 0.732974] ata3: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6fa900 irq 43
[ 0.732976] ata4: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6fa980 irq 43
[ 0.732978] ata5: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6faa00 irq 43
[ 0.732980] ata6: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6faa80 irq 43
[ 0.732982] ata7: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6fab00 irq 43
[ 0.732984] ata8: SATA max UDMA/133 abar m2048@0xfe6fa800 port 0xfe6fab80 irq 43
[ 0.733014] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.733024] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.733027] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.733033] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.744041] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.747929] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.747940] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe6fb800
[ 0.760012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.760028] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.760030] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.760033] usb usb2: Product: EHCI Host Controller
[ 0.760035] usb usb2: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[ 0.760037] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.760139] hub 2-0:1.0: USB hub found
[ 0.760142] hub 2-0:1.0: 6 ports detected
[ 0.771066] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.771103] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.771107] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.771109] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.771115] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.784049] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c480
[ 0.784082] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.784085] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.784087] usb usb3: Product: UHCI Host Controller
[ 0.784089] usb usb3: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[ 0.784091] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.784172] hub 3-0:1.0: USB hub found
[ 0.784175] hub 3-0:1.0: 2 ports detected
[ 0.784240] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.784244] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.784246] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.784251] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.800049] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
[ 0.800082] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.800084] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.800087] usb usb4: Product: UHCI Host Controller
[ 0.800089] usb usb4: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[ 0.800091] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.800169] hub 4-0:1.0: USB hub found
[ 0.800172] hub 4-0:1.0: 2 ports detected
[ 0.800222] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.800227] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.800229] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.800233] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.812035] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c880
[ 0.812072] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.812075] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.812077] usb usb5: Product: UHCI Host Controller
[ 0.812079] usb usb5: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[ 0.812081] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.812161] hub 5-0:1.0: USB hub found
[ 0.812164] hub 5-0:1.0: 2 ports detected
[ 0.812214] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.812218] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.812220] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.812226] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.824038] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c000
[ 0.824075] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.824078] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.824080] usb usb6: Product: UHCI Host Controller
[ 0.824082] usb usb6: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[ 0.824084] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.824174] hub 6-0:1.0: USB hub found
[ 0.824177] hub 6-0:1.0: 2 ports detected
[ 0.824233] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.824238] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.824241] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.824246] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.824287] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
[ 0.824311] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.824313] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.824315] usb usb7: Product: UHCI Host Controller
[ 0.824316] usb usb7: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[ 0.824317] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.824383] hub 7-0:1.0: USB hub found
[ 0.824386] hub 7-0:1.0: 2 ports detected
[ 0.824435] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.824440] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.824443] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.824448] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.824480] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
[ 0.824508] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.824509] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.824511] usb usb8: Product: UHCI Host Controller
[ 0.824512] usb usb8: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[ 0.824514] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.824584] hub 8-0:1.0: USB hub found
[ 0.824587] hub 8-0:1.0: 2 ports detected
[ 1.060015] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 1.192386] usb 1-6: New USB device found, idVendor=03f0, idProduct=2f24
[ 1.192390] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.192543] hub 1-6:1.0: USB hub found
[ 1.192631] hub 1-6:1.0: 6 ports detected
[ 1.224019] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.225240] ata3.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
[ 1.225243] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.226500] ata3.00: configured for UDMA/133
[ 1.226606] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
[ 1.228079] firewire_core: created device fw0: GUID 001e8c00014b89d6, S400
[ 1.392043] Refined TSC clocksource calibration: 3005.554 MHz.
[ 1.392046] Switching to clocksource tsc
[ 1.432011] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.544012] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.608079] usb 3-1: New USB device found, idVendor=046d, idProduct=c01a
[ 1.608082] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.608084] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 1.608086] usb 3-1: Manufacturer: Logitech
[ 1.864013] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.184013] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.080011] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.085044] ata7.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
[ 3.091933] ata7.00: configured for UDMA/100
[ 3.210257] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5
[ 3.528013] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.541295] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.541332] sd 2:0:0:0: [sda] Write Protect is off
[ 3.541334] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.541350] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.547259] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1
[ 3.547325] generic-usb 0003:046D:C01A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1/input0
[ 3.547338] usbcore: registered new interface driver usbhid
[ 3.547339] usbhid: USB HID core driver
[ 3.582353] sda: sda1 sda2 sda3 sda4 sda5
[ 3.582637] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.650831] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.650834] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.650942] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 3.653569] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.653598] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 4.165715] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.368865] <30>udev[465]: starting version 167
[ 5.610448] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.610453] ACPI: Power Button [PWRB]
[ 5.610496] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.610498] ACPI: Power Button [PWRF]
[ 5.813246] ACPI: acpi_idle registered with cpuidle
[ 6.100215] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.100219] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[ 6.100221] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.110452] parport_pc 00:0a: reported by Plug and Play ACPI
[ 6.110644] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 6.186352] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.209910] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.209948] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.209966] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.234806] [drm] Initialized drm 1.1.0 20060810
[ 6.392108] cfg80211: Calling CRDA to update world regulatory domain
[ 6.466995] hda_codec: ALC883: BIOS auto-probing.
[ 6.468292] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 6.565970] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 6.698391] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.698395] i915 0000:00:02.0: setting latency timer to 64
[ 6.719941] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 6.719943] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 6.720261] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 6.720265] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.720266] [drm] Driver supports precise vblank timestamp query.
[ 6.763013] C-Media PCI 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.792620] rt2500pci 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.844285] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.844667] Registered led device: rt2500pci-phy0::radio
[ 6.844683] Registered led device: rt2500pci-phy0::quality
[ 6.881650] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.881966] [drm] initialized overlay support
[ 7.261796] Console: switching to colour frame buffer device 240x75
[ 7.266263] fb0: inteldrmfb frame buffer device
[ 7.266264] drm: registered panic notifier
[ 7.266274] No ACPI video bus found
[ 7.266672] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.730147] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 7.850210] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 7.938800] device-mapper: uevent: version 1.0.3
[ 7.938984] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 27.488320] Intel AES-NI instructions are not detected.
[ 27.519409] padlock_aes: VIA PadLock not detected.
[ 27.913531] padlock_sha: VIA PadLock Hash Engine not detected.
[ 28.092944] loop: module loaded
[ 28.146788] Adding 10485756k swap on /dev/mapper/cswap. Priority:-1 extents:1 across:10485756k
[ 28.318962] EXT4-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
[ 28.348428] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 29.176383] RPC: Registered udp transport module.
[ 29.176385] RPC: Registered tcp transport module.
[ 29.176386] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 29.242050] FS-Cache: Loaded
[ 29.283007] FS-Cache: Netfs 'nfs' registered for caching
[ 29.308076] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 29.633839] fuse init (API version 7.16)
[ 31.847671] atl1 0000:01:00.0: irq 46 for MSI/MSI-X
[ 31.847764] atl1 0000:01:00.0: eth0 link is up 100 Mbps full duplex
[ 31.901163] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.466408] Bluetooth: Core ver 2.15
[ 33.466424] NET: Registered protocol family 31
[ 33.466425] Bluetooth: HCI device and connection manager initialized
[ 33.466427] Bluetooth: HCI socket layer initialized
[ 33.552418] Bluetooth: L2CAP ver 2.15
[ 33.552419] Bluetooth: L2CAP socket layer initialized
[ 33.587498] Bluetooth: RFCOMM TTY layer initialized
[ 33.587506] Bluetooth: RFCOMM socket layer initialized
[ 33.587507] Bluetooth: RFCOMM ver 1.11
[ 33.640184] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.640186] Bluetooth: BNEP filters: protocol multicast
[ 33.672618] Bluetooth: SCO (Voice Link) ver 0.6
[ 33.672619] Bluetooth: SCO socket layer initialized
[ 36.829040] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 37.585824] sshd (2774): /proc/2774/oom_adj is deprecated, please use /proc/2774/oom_score_adj instead.
[ 42.064007] eth0: no IPv6 routers present
[ 42.883203] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0
[ 42.885565] EXT4-fs (dm-0): re-mounted. Opts: commit=0
Reply to: