--- Begin Message ---
Package: linux-2.6
Version: 2.6.38-4
Severity: important
Tags: sid
The fuse module cannot be loaded due to unknown symbol "_kstrtoul".
-- Package-specific info:
** Version:
Linux version 2.6.38-2-686 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 05:24:21 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.38-2-686 root=UUID=fd22fa0f-d09c-4828-8f01-e87d21e05601 ro vga=791 quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 28.497639] XFS mounting filesystem dm-0
[ 28.632602] Ending clean XFS mount for filesystem: dm-0
[ 28.713611] XFS mounting filesystem dm-1
[ 28.900230] Ending clean XFS mount for filesystem: dm-1
[ 30.214824] fuse init (API version 7.16)
[ 31.110147] tun: Universal TUN/TAP device driver, 1.6
[ 31.110150] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 32.601145] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 36.494444] lp: driver loaded but no devices found
[ 36.948641] ppdev: user-space parallel port driver
[ 38.111441] tg3 0000:09:00.0: irq 48 for MSI/MSI-X
[ 38.146445] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.239778] tg3 0000:09:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 41.239781] tg3 0000:09:00.0: eth0: Flow control is on for TX and on for RX
[ 41.239916] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 50.943445] Disabling lock debugging due to kernel taint
[ 50.943453] nvidia: module license 'NVIDIA' taints kernel.
[ 51.915612] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 51.915623] nvidia 0000:01:00.0: setting latency timer to 64
[ 51.915629] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 51.915775] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.44 Sun Feb 27 21:30:31 PST 2011
[ 53.257393] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 410.663886] keyboard: can't emulate rawmode for keycode 240
[ 410.663914] keyboard: can't emulate rawmode for keycode 240
[ 411.104246] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 411.286271] usb 3-2: New USB device found, idVendor=413c, idProduct=8140
[ 411.286280] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 411.349336] Bluetooth: Core ver 2.15
[ 411.349359] NET: Registered protocol family 31
[ 411.349361] Bluetooth: HCI device and connection manager initialized
[ 411.349363] Bluetooth: HCI socket layer initialized
[ 411.434565] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 411.436792] usbcore: registered new interface driver btusb
[ 412.047407] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
[ 412.120502] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 414.748120] iwl3945 0000:0c:00.0: Card state received: HW:Kill SW:On
[ 414.748241] iwl3945 0000:0c:00.0: Not sending command - RF KILL
[ 414.748251] iwl3945 0000:0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[ 414.748260] iwl3945 0000:0c:00.0: Error setting new configuration (-5).
[ 414.748272] iwl3945 0000:0c:00.0: Not sending command - RF KILL
[ 414.748281] iwl3945 0000:0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[ 414.748287] iwl3945 0000:0c:00.0: Error setting new configuration (-5).
[ 414.748684] keyboard: can't emulate rawmode for keycode 240
[ 414.748709] keyboard: can't emulate rawmode for keycode 240
[ 414.762321] iwl3945 0000:0c:00.0: Not sending command - RF KILL
[ 414.762332] iwl3945 0000:0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[ 414.762342] iwl3945 0000:0c:00.0: Error setting new configuration (-5).
[ 414.766297] iwl3945 0000:0c:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x040003DD
[ 414.824104] usb 3-2: USB disconnect, address 2
[ 415.441003] keyboard: can't emulate rawmode for keycode 240
[ 415.441028] keyboard: can't emulate rawmode for keycode 240
[ 416.056166] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 416.234505] usb 3-2: New USB device found, idVendor=413c, idProduct=8140
[ 416.234515] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 417.066726] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 422.389988] wlan0: authenticate with 00:03:52:ad:25:84 (try 1)
[ 422.395332] wlan0: authenticated
[ 422.396549] wlan0: associate with 00:03:52:ad:25:84 (try 1)
[ 422.399022] wlan0: RX AssocResp from 00:03:52:ad:25:84 (capab=0xc31 status=0 aid=2)
[ 422.399029] wlan0: associated
[ 422.400909] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 424.397760] iwl3945 0000:0c:00.0: Card state received: HW:Kill SW:On
[ 424.397882] iwl3945 0000:0c:00.0: Not sending command - RF KILL
[ 424.397890] iwl3945 0000:0c:00.0: Error sending REPLY_QOS_PARAM: enqueue_hcmd failed: -5
[ 424.397907] iwl3945 0000:0c:00.0: Not sending command - RF KILL
[ 424.397914] iwl3945 0000:0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[ 424.397921] iwl3945 0000:0c:00.0: Error setting new configuration (-5).
[ 424.397928] iwl3945 0000:0c:00.0: Not sending command - RF KILL
[ 424.397934] iwl3945 0000:0c:00.0: Error sending REPLY_RXON_ASSOC: enqueue_hcmd failed: -5
[ 424.397944] wlan0: deauthenticating from 00:03:52:ad:25:84 by local choice (reason=3)
[ 424.397987] iwl3945 0000:0c:00.0: Not sending command - RF KILL
[ 424.397993] iwl3945 0000:0c:00.0: Error sending REPLY_REMOVE_STA: enqueue_hcmd failed: -5
[ 424.398000] iwl3945 0000:0c:00.0: Error removing station 00:03:52:ad:25:84
[ 424.398353] keyboard: can't emulate rawmode for keycode 240
[ 424.398375] keyboard: can't emulate rawmode for keycode 240
[ 424.412078] iwl3945 0000:0c:00.0: Not sending command - RF KILL
[ 424.412086] iwl3945 0000:0c:00.0: Error sending REPLY_RXON_ASSOC: enqueue_hcmd failed: -5
[ 424.412096] iwl3945 0000:0c:00.0: Not sending command - RF KILL
[ 424.412100] iwl3945 0000:0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[ 424.412105] iwl3945 0000:0c:00.0: Error setting new configuration (-5).
[ 424.412126] cfg80211: Calling CRDA for country: DE
[ 424.432095] iwl3945 0000:0c:00.0: Not sending command - RF KILL
[ 424.432102] iwl3945 0000:0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[ 424.432107] iwl3945 0000:0c:00.0: Error setting new configuration (-5).
[ 424.436060] iwl3945 0000:0c:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x040003DD
[ 424.496133] usb 3-2: USB disconnect, address 3
[ 735.459682] fuse exit
[ 1199.055012] <30>udevd[7888]: starting version 168
[ 1468.530749] fuse: Unknown symbol _kstrtoul (err 0)
[ 8542.224525] fuse: Unknown symbol _kstrtoul (err 0)
[ 8550.679077] fuse: Unknown symbol _kstrtoul (err 0)
[ 8635.392388] fuse: Unknown symbol _kstrtoul (err 0)
[ 8754.410753] fuse: Unknown symbol _kstrtoul (err 0)
[ 8762.050984] fuse: Unknown symbol _kstrtoul (err 0)
** Model information
not available
** Loaded modules:
Module Size Used by
btusb 17209 0
bluetooth 50119 1 btusb
cpufreq_userspace 12520 0
cpufreq_stats 12670 0
cpufreq_powersave 12422 0
cpufreq_conservative 13598 0
xt_multiport 12470 1
iptable_filter 12488 1
ip_tables 16998 1 iptable_filter
x_tables 17967 3 xt_multiport,iptable_filter,ip_tables
nvidia 9228626 32
parport_pc 21895 0
ppdev 12621 0
lp 12858 0
parport 27018 3 parport_pc,ppdev,lp
tun 17663 0
uinput 12984 1
ext3 98001 1
jbd 40818 1 ext3
mbcache 12810 1 ext3
acpi_cpufreq 12737 1
mperf 12387 1 acpi_cpufreq
firewire_sbp2 17511 0
loop 17805 0
sha256_generic 16709 4
aes_i586 16608 8
aes_generic 37066 1 aes_i586
cbc 12659 4
dm_crypt 17809 2
dm_mod 56394 5 dm_crypt
snd_hda_codec_idt 44443 1
joydev 16906 0
snd_hda_intel 21529 1
arc4 12418 2
snd_hda_codec 57563 2 snd_hda_codec_idt,snd_hda_intel
usb_storage 34951 0
uas 12975 0
ecb 12649 2
dell_wmi 12437 0
sparse_keymap 12680 1 dell_wmi
pcmcia 32024 0
snd_hwdep 12906 1 snd_hda_codec
usbhid 35168 0
hid 59736 1 usbhid
iwl3945 50188 0
iwlcore 50368 1 iwl3945
psmouse 45863 0
i2c_i801 12670 0
i2c_core 18989 2 nvidia,i2c_i801
snd_pcm_oss 35864 0
snd_mixer_oss 17649 1 snd_pcm_oss
tpm_tis 12949 0
yenta_socket 22152 0
pcmcia_rsrc 17314 1 yenta_socket
pcmcia_core 17973 3 pcmcia,yenta_socket,pcmcia_rsrc
snd_pcm 52774 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
pcspkr 12515 0
tpm 17454 1 tpm_tis
tpm_bios 12799 1 tpm
battery 12926 0
serio_raw 12758 0
evdev 13084 28
mac80211 160285 2 iwl3945,iwlcore
ac 12552 0
dell_laptop 12740 0
dcdbas 13080 1 dell_laptop
button 12866 0
wmi 13018 1 dell_wmi
video 17345 0
snd_timer 22171 1 snd_pcm
snd 38153 10 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 12878 1 snd
snd_page_alloc 12841 2 snd_hda_intel,snd_pcm
cfg80211 106889 3 iwl3945,iwlcore,mac80211
rfkill 18510 4 bluetooth,dell_laptop,cfg80211
power_supply 13283 3 battery,ac,dell_laptop
processor 26983 3 acpi_cpufreq
xfs 537165 3
exportfs 12527 1 xfs
sg 21385 0
sr_mod 17418 0
sd_mod 34941 6
cdrom 34631 1 sr_mod
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
uhci_hcd 21850 0
ahci 20897 5
libahci 22161 1 ahci
ata_piix 21079 0
libata 131904 4 ata_generic,ahci,libahci,ata_piix
tg3 103807 0
scsi_mod 134369 7 firewire_sbp2,usb_storage,uas,sg,sr_mod,sd_mod,libata
ehci_hcd 34889 0
usbcore 99058 7 btusb,usb_storage,uas,usbhid,uhci_hcd,ehci_hcd
firewire_ohci 26296 0
firewire_core 42274 2 firewire_sbp2,firewire_ohci
thermal 13058 0
crc_itu_t 12331 1 firewire_core
libphy 18279 1 tg3
thermal_sys 17667 3 video,processor,thermal
nls_base 12649 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Device [1028:01fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f2000000-f6efffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f20 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f00 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Dell Device [1028:01fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6ffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 84000000-841fffff
Prefetchable memory behind bridge: 0000000084200000-00000000843fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f1f00000-f1ffffff
Prefetchable memory behind bridge: 0000000084400000-00000000845fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f1c00000-f1efffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f1b00000-f1bfffff
Prefetchable memory behind bridge: 0000000084600000-00000000847fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f1a00000-f1afffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 6fa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 45
Region 0: I/O ports at 6eb0 [size=8]
Region 1: I/O ports at 6eb8 [size=4]
Region 2: I/O ports at 6ec0 [size=8]
Region 3: I/O ports at 6ec8 [size=4]
Region 4: I/O ports at 6ee0 [size=32]
Region 5: Memory at f6ffb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f6ffb700 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation G84M [Quadro NVS 140M] [10de:0429] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at ef00 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21)
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f1a00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f1aff000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f1afe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
Subsystem: Dell Device [1028:01fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f1bf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1021]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f1fff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 413c:0058 Dell Computer Corp. Port Replicator
Bus 001 Device 003: ID 0424:2512 Standard Microsystems Corp. USB 2.0 Hub
Bus 007 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 001 Device 004: ID 0424:2602 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 005: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Bus 007 Device 003: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader
Bus 001 Device 006: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader
Bus 001 Device 007: ID 046a:0011 Cherry GmbH G83 (RS 6000) Keyboard
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.38-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-686 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-686 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.38-2-686 suggests:
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-2-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.29 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-686/postinst/depmod-error-initrd-2.6.38-2-686: false
linux-image-2.6.38-2-686/postinst/ignoring-do-bootloader-2.6.38-2-686:
linux-image-2.6.38-2-686/prerm/removing-running-kernel-2.6.38-2-686: true
linux-image-2.6.38-2-686/postinst/missing-firmware-2.6.38-2-686:
--- End Message ---