[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#313552: marked as done (kernel-image-2.6.11-alpha: qla1280 driver doesn't work with ISP1020 (PCI ID: 1077:1020))

Your message dated Fri, 22 Apr 2011 22:49:41 +0200
with message-id <20110422204941.GA7427@pisco.westfalen.local>
and subject line Re: kernel-image-2.6.11-alpha: qla1280 driver doesn't work with ISP1020 (PCI ID: 1077:1020)
has caused the Debian Bug report #313552,
regarding kernel-image-2.6.11-alpha: qla1280 driver doesn't work with ISP1020 (PCI ID: 1077:1020)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
313552: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=313552
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: kernel-image-2.6.11-alpha
Version: 2.6.11-1
Severity: important

In 2.6.11, qla1280 fails to load on my system with this error:

qla1280: QLA1040 found on PCI bus 1, dev 1
PCI: Setting latency timer of device 0000:01:01.0 to 64
qla1280: Failed mbox check
qla1280_mailbox_command: Command failed, mailbox0 = 0x0007, mailbox_out0 = 0x4003, istatus = 0x0000
m0 4003, m1 aaaa, m2 0000, m3 aa55
m4 55aa, m5 a5a5, m6 a5a5, m7 a5a5
scsi(0): Failed checksum
scsi(0): initialize: pci probe failed!
qla1x160: Failed to initialize adapter
qla1280: QLA1040 found on PCI bus 1, dev 2
PCI: Setting latency timer of device 0000:01:02.0 to 64
qla1280: Failed mbox check
qla1280_mailbox_command: Command failed, mailbox0 = 0x0007, mailbox_out0 = 0x4003, istatus = 0x0000
m0 4003, m1 aaaa, m2 0000, m3 aa55
m4 55aa, m5 a5a5, m6 a5a5, m7 a5a5
scsi(1): Failed checksum
scsi(1): initialize: pci probe failed!
qla1x160: Failed to initialize adapter

Still no 2.6 kernel that works completely on my alpha, alas.

The PCI info for this card is:

0000:01:01.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 01)
0000:01:02.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 01)

0000:01:01.0 0100: 1077:1020 (rev 01)
0000:01:02.0 0100: 1077:1020 (rev 01)


-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: alpha
Kernel: Linux 2.6.11-1-generic
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

--- End Message ---
--- Begin Message --- 
Version: 2.6.38-3

On Tue, Jun 14, 2005 at 03:59:00AM -0700, Steve Langasek wrote:
> Package: kernel-image-2.6.11-alpha
> Version: 2.6.11-1
> Severity: important
> 
> In 2.6.11, qla1280 fails to load on my system with this error:

Support for the Alpha architecture has been removed from the archive.
Closing this bug with the current version in sid.

Cheers,
        Moritz

--- End Message ---
Reply to: