Bug#623571: dom0 kernel wastes a lot of memory if unrestrained with dom0_mem
Package: linux-image-2.6.32-5-xen-amd64
Version: 2.6.32-31
Hi,
Clean boot of a new machine with this kernel and xen-hypervisor-4.0-amd64
4.0.1-2, without any options, produced:
[joy@krk:~]% free
total used free shared buffers cached
Mem: 7335032 1460256 5874776 0 30032 54872
-/+ buffers/cache: 1375352 5959680
Swap: 979956 0 979956
Despite:
[joy@krk:~]% ps auxfw | awk '$5 > 1 { vsz_sum += $5; rss_sum += $6 } END { print "VSZ:", vsz_sum; print "RSS:", rss_sum; }'
VSZ: 961944
RSS: 68856
Well, that's just bizarre. Indeed, I noticed that all this memory was really
taken when I accidentally ran xm mem-set Domain-0 1024, which crashed the
machine in short order.
Because of previous experience, I figured forcing dom0_mem might make a
difference, so I added a conservative limit:
GRUB_CMDLINE_XEN="dom0_mem=2048M"
...to /etc/default/grub, re-ran update-grub and rebooted, and voila:
[joy@krk:~]% free
total used free shared buffers cached
Mem: 2078556 245164 1833392 0 3384 34600
-/+ buffers/cache: 207180 1871376
Swap: 979956 0 979956
[joy@krk:~]% ps auxfw | awk '$5 > 1 { vsz_sum += $5; rss_sum += $6 } END {
print "VSZ:", vsz_sum; print "RSS:", rss_sum; }'
VSZ: 944628
RSS: 69440
I'm attaching the two dmesg outputs. Let me know if there's anything else
that can help. TIA.
--
2. That which causes joy or happiness.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Mar 8 00:01:30 UTC 2011
Command line: placeholder root=UUID=5512594d-06f6-4802-890a-d58aee86f324 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
released 0 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009c400 (usable)
Xen: 000000000009c400 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 0000000080000000 (usable)
Xen: 00000000bf7a0000 - 00000000bf7b9000 (ACPI data)
Xen: 00000000bf7b9000 - 00000000bf7ba000 (ACPI NVS)
Xen: 00000000bf7ba000 - 00000000c0000000 (reserved)
Xen: 00000000e0000000 - 00000000f0000000 (reserved)
Xen: 00000000fec00000 - 00000000fed00000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ffa00000 - 0000000100000000 (reserved)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x80000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-0000000080000000
0000000000 - 0080000000 page 4k
kernel direct mapping tables up to 80000000 @ 100000-503000
RAMDISK: 016ba000 - 03356000
ACPI: RSDP 00000000000f7ec0 00024 (v02 PTLTD )
ACPI: XSDT 00000000bf7afb5d 0019C (v01 PTLTD ? XSDT 00060000 LTP 00000000)
ACPI: FACP 00000000bf7b5c1d 000F4 (v03 FSC TYLERBRG 00060000 PTL 000F4240)
ACPI: DSDT 00000000bf7afcf9 05EA0 (v01 FSC D2619 00060000 MSFT 03000001)
ACPI: FACS 00000000bf7b9fc0 00040
ACPI: TCPA 00000000bf7b5d11 00032 (v01 Phoeni x 00060000 TL 00000000)
ACPI: SLIT 00000000bf7b5d43 00030 (v01 FSC 00060000 0000005A)
ACPI: SRAT 00000000bf7b5d73 001A8 (v01 Intel Tylerbrg 00060000 PHX. 00000001)
ACPI: SSDT 00000000bf7b5f1b 000D8 (v01 FSC CST_PR00 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b5ff3 000D8 (v01 FSC CST_PR01 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b60cb 000D8 (v01 FSC CST_PR02 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b61a3 000D8 (v01 FSC CST_PR03 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b627b 000D8 (v01 FSC CST_PR12 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6353 000D8 (v01 FSC CST_PR13 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b642b 000D8 (v01 FSC CST_PR14 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6503 000D8 (v01 FSC CST_PR15 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b65db 000D8 (v01 FSC CST_PR20 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b66b3 000D8 (v01 FSC CST_PR21 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b678b 000D8 (v01 FSC CST_PR22 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6863 000D8 (v01 FSC CST_PR23 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b693b 000D8 (v01 FSC CST_PR32 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6a13 000D8 (v01 FSC CST_PR33 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6aeb 000D8 (v01 FSC CST_PR34 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6bc3 000D8 (v01 FSC CST_PR35 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6c9b 0017C (v01 FSC PST_PR00 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6e17 0017C (v01 FSC PST_PR01 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6f93 0017C (v01 FSC PST_PR02 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b710f 0017C (v01 FSC PST_PR03 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b728b 0017C (v01 FSC PST_PR12 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7407 0017C (v01 FSC PST_PR13 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7583 0017C (v01 FSC PST_PR14 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b76ff 0017C (v01 FSC PST_PR15 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b787b 0017C (v01 FSC PST_PR20 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b79f7 0017C (v01 FSC PST_PR21 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7b73 0017C (v01 FSC PST_PR22 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7cef 0017C (v01 FSC PST_PR23 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7e6b 0017C (v01 FSC PST_PR32 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7fe7 0017C (v01 FSC PST_PR33 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b8163 0017C (v01 FSC PST_PR34 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b82df 0017C (v01 FSC PST_PR35 00060000 CSF 00000001)
ACPI: EINJ 00000000bf7b845b 001B0 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: HEST 00000000bf7b860b 00268 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: BERT 00000000bf7b8873 00030 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: SSDT 00000000bf7b88a3 000E1 (v01 wheaos wheaosc 00060000 INTL 20050624)
ACPI: ERST 00000000bf7b8984 00270 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: SPCR 00000000bf7b8bf4 00050 (v01 PTLTD $UCRTBL$ 00060000 PTL 00000001)
ACPI: XMAR 00000000bf7b8c44 001E8 (v01 Intel OEMDMAR 00060000 LOHR 00000001)
ACPI: MCFG 00000000bf7b8e2c 0003C (v01 PTLTD MCFG 00060000 LTP 00000000)
ACPI: HPET 00000000bf7b8e68 00038 (v01 PTLTD HPETTBL 00060000 LTP 00000001)
ACPI: APIC 00000000bf7b8ea0 00138 (v01 PTLTD ? APIC 00060000 LTP 00000000)
ACPI: BOOT 00000000bf7b8fd8 00028 (v01 PTLTD $SBFTBL$ 00060000 LTP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000080000000
Bootmem setup node 0 0000000000000000-0000000080000000
NODE_DATA [0000000000010040 - 000000000001803f]
bootmap [0000000000019000 - 0000000000028fff] pages 10
(9 early reservations) ==> bootmem [0000000000 - 0080000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0003757000 - 0003776000] XEN PAGETABLES ==> [0003757000 - 0003776000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#3 [0001000000 - 00016999d4] TEXT DATA BSS ==> [0001000000 - 00016999d4]
#4 [00016ba000 - 0003356000] RAMDISK ==> [00016ba000 - 0003356000]
#5 [0003356000 - 0003757000] XEN START INFO ==> [0003356000 - 0003757000]
#6 [000169a000 - 000169a2d8] BRK ==> [000169a000 - 000169a2d8]
#7 [0000100000 - 00004e1000] PGTABLE ==> [0000100000 - 00004e1000]
#8 [0000010000 - 0000010030] ACPI SLIT ==> [0000010000 - 0000010030]
found SMP MP-table at [ffff8800000f7ef0] f7ef0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x00080000
On node 0 totalpages: 524172
DMA zone: 56 pages used for memmap
DMA zone: 996 pages reserved
DMA zone: 2928 pages, LIFO batch:0
DMA32 zone: 7112 pages used for memmap
DMA32 zone: 513080 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x35] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-0
ACPI: IOAPIC (id[0x05] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 0, address 0xfec80000, GSI 24-24
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ERROR: Unable to locate IOAPIC for GSI 2
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ERROR: Unable to locate IOAPIC for GSI 9
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 280
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:3f7a0000)
Booting paravirtualized kernel on Xen
Xen version: 4.0.1 (preserve-AD) (dom0)
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff8800037ac000 s90328 r8192 d24360 u122880
pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
trying to map vcpu_info 0 at ffff8800037b7020, mfn 13b7b7, offset 32
cpu 0 using vcpu_info at ffff8800037b7020
trying to map vcpu_info 1 at ffff8800037d5020, mfn 13b7d5, offset 32
cpu 1 using vcpu_info at ffff8800037d5020
trying to map vcpu_info 2 at ffff8800037f3020, mfn 13b7f3, offset 32
cpu 2 using vcpu_info at ffff8800037f3020
trying to map vcpu_info 3 at ffff880003811020, mfn 13b811, offset 32
cpu 3 using vcpu_info at ffff880003811020
trying to map vcpu_info 4 at ffff88000382f020, mfn 13b82f, offset 32
cpu 4 using vcpu_info at ffff88000382f020
trying to map vcpu_info 5 at ffff88000384d020, mfn 13b84d, offset 32
cpu 5 using vcpu_info at ffff88000384d020
trying to map vcpu_info 6 at ffff88000386b020, mfn 13b86b, offset 32
cpu 6 using vcpu_info at ffff88000386b020
trying to map vcpu_info 7 at ffff880003889020, mfn 13b889, offset 32
cpu 7 using vcpu_info at ffff880003889020
trying to map vcpu_info 8 at ffff8800038a7020, mfn 13b8a7, offset 32
cpu 8 using vcpu_info at ffff8800038a7020
trying to map vcpu_info 9 at ffff8800038c5020, mfn 13b8c5, offset 32
cpu 9 using vcpu_info at ffff8800038c5020
trying to map vcpu_info 10 at ffff8800038e3020, mfn 13b8e3, offset 32
cpu 10 using vcpu_info at ffff8800038e3020
trying to map vcpu_info 11 at ffff880003901020, mfn 13b901, offset 32
cpu 11 using vcpu_info at ffff880003901020
trying to map vcpu_info 12 at ffff88000391f020, mfn 13b91f, offset 32
cpu 12 using vcpu_info at ffff88000391f020
trying to map vcpu_info 13 at ffff88000393d020, mfn 13b93d, offset 32
cpu 13 using vcpu_info at ffff88000393d020
trying to map vcpu_info 14 at ffff88000395b020, mfn 13b95b, offset 32
cpu 14 using vcpu_info at ffff88000395b020
trying to map vcpu_info 15 at ffff880003979020, mfn 13b979, offset 32
cpu 15 using vcpu_info at ffff880003979020
Xen: using vcpu_info placement
Built 1 zonelists in Node order, mobility grouping on. Total pages: 516008
Policy zone: DMA32
Kernel command line: placeholder root=UUID=5512594d-06f6-4802-890a-d58aee86f324 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
DMA: Placing 64MB software IO TLB between ffff880005787000 - ffff880009787000
DMA: software IO TLB at phys 0x5787000 - 0x9787000
xen_swiotlb_fixup: buf=ffff880005787000 size=67108864
xen_swiotlb_fixup: buf=ffff8800097e7000 size=32768
Memory: 1955512k/2097152k available (3148k kernel code, 464k absent, 141176k reserved, 1907k data, 604k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:4352
xen: --> irq=0
xen: --> irq=1
xen: --> irq=2
xen: --> irq=3
xen: --> irq=4
xen: --> irq=5
xen: --> irq=6
xen: --> irq=7
xen: --> irq=8
xen: --> irq=9
xen: --> irq=10
xen: --> irq=11
xen: --> irq=12
xen: --> irq=13
xen: --> irq=14
xen: --> irq=15
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
xen: registering gsi 9 triggering 0 polarity 0
xen_allocate_pirq: returning irq 9 for gsi 9
xen: --> irq=9
xen: acpi sci 9
Console: colour VGA+ 80x25
console [tty0] enabled
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
alloc irq_desc for 4351 on node -1
alloc kstat_irqs on node -1
Detected 2400.180 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.36 BogoMIPS (lpj=9600720)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 0/0x0 -> Node 0
CPU: Unsupported number of siblings 32
mce: CPU supports 9 MCE banks
Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
alloc irq_desc for 4350 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4349 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4348 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4347 on node -1
alloc kstat_irqs on node -1
installing Xen timer for CPU 1
alloc irq_desc for 4346 on node -1
alloc kstat_irqs on node -1
SMP alternatives: switching to SMP code
alloc irq_desc for 4345 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4344 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4343 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4342 on node -1
alloc kstat_irqs on node -1
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 1/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 2
alloc irq_desc for 4341 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4340 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4339 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4338 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4337 on node -1
alloc kstat_irqs on node -1
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 2/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 3
alloc irq_desc for 4336 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4335 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4334 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4333 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4332 on node -1
alloc kstat_irqs on node -1
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 3/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 4
alloc irq_desc for 4331 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4330 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4329 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4328 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4327 on node -1
alloc kstat_irqs on node -1
Initializing CPU#4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 4/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 5
alloc irq_desc for 4326 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4325 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4324 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4323 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4322 on node -1
alloc kstat_irqs on node -1
Initializing CPU#5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 5/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 6
alloc irq_desc for 4321 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4320 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4319 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4318 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4317 on node -1
alloc kstat_irqs on node -1
Initializing CPU#6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 6/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 7
alloc irq_desc for 4316 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4315 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4314 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4313 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4312 on node -1
alloc kstat_irqs on node -1
Initializing CPU#7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 7/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 8
alloc irq_desc for 4311 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4310 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4309 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4308 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4307 on node -1
alloc kstat_irqs on node -1
Initializing CPU#8
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 8/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 9
alloc irq_desc for 4306 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4305 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4304 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4303 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4302 on node -1
alloc kstat_irqs on node -1
Initializing CPU#9
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 9/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 10
alloc irq_desc for 4301 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4300 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4299 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4298 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4297 on node -1
alloc kstat_irqs on node -1
Initializing CPU#10
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 10/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 11
alloc irq_desc for 4296 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4295 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4294 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4293 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4292 on node -1
alloc kstat_irqs on node -1
Initializing CPU#11
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 11/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 12
alloc irq_desc for 4291 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4290 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4289 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4288 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4287 on node -1
alloc kstat_irqs on node -1
Initializing CPU#12
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 12/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 13
alloc irq_desc for 4286 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4285 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4284 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4283 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4282 on node -1
alloc kstat_irqs on node -1
Initializing CPU#13
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 13/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 14
alloc irq_desc for 4281 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4280 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4279 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4278 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4277 on node -1
alloc kstat_irqs on node -1
Initializing CPU#14
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 14/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 15
alloc irq_desc for 4276 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4275 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4274 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4273 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4272 on node -1
alloc kstat_irqs on node -1
Initializing CPU#15
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 15/0x0 -> Node 0
CPU: Unsupported number of siblings 32
Brought up 16 CPUs
CPU0 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CPU1 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
CPU2 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 1
CPU3 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 3 4 5 6 7 8 9 10 11 12 13 14 15 0 1 2
CPU4 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 4 5 6 7 8 9 10 11 12 13 14 15 0 1 2 3
CPU5 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 5 6 7 8 9 10 11 12 13 14 15 0 1 2 3 4
CPU6 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 6 7 8 9 10 11 12 13 14 15 0 1 2 3 4 5
CPU7 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 7 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6
CPU8 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7
CPU9 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7 8
CPU10 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 10 11 12 13 14 15 0 1 2 3 4 5 6 7 8 9
CPU11 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 11 12 13 14 15 0 1 2 3 4 5 6 7 8 9 10
CPU12 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 12 13 14 15 0 1 2 3 4 5 6 7 8 9 10 11
CPU13 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 13 14 15 0 1 2 3 4 5 6 7 8 9 10 11 12
CPU14 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 14 15 0 1 2 3 4 5 6 7 8 9 10 11 12 13
CPU15 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 15 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
devtmpfs: initialized
Grant table initialized
regulator: core version 0.5
NET: Registered protocol family 16
alloc irq_desc for 4271 on node -1
alloc kstat_irqs on node -1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
sync cpu 0 get result 1 max_id f
sync cpu 1 get result 1 max_id f
sync cpu 2 get result 1 max_id f
sync cpu 3 get result 1 max_id f
sync cpu 4 get result 1 max_id f
sync cpu 5 get result 1 max_id f
sync cpu 6 get result 1 max_id f
sync cpu 7 get result 1 max_id f
sync cpu 8 get result 1 max_id f
sync cpu 9 get result 1 max_id f
sync cpu a get result 1 max_id f
sync cpu b get result 1 max_id f
sync cpu c get result 1 max_id f
sync cpu d get result 1 max_id f
sync cpu e get result 1 max_id f
sync cpu f get result 1 max_id f
alloc irq_desc for 4270 on node -1
alloc kstat_irqs on node -1
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 10
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e0afffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ERROR: Unable to locate IOAPIC for GSI 9
ACPI: EC: Look up EC in DSDT
ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 7
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [CPU0] (0000:ff)
ACPI: PCI Root Bridge [CPU1] (0000:fe)
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xce000000-0xce0003ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xce001000-0xce0013ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57]
pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47]
pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43]
pci 0000:00:1f.2: reg 20 io port: [0x1c10-0x1c1f]
pci 0000:00:1f.2: reg 24 io port: [0x1c00-0x1c0f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xce002000-0xce0020ff]
pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1f.5: reg 10 io port: [0x1c68-0x1c6f]
pci 0000:00:1f.5: reg 14 io port: [0x1c5c-0x1c5f]
pci 0000:00:1f.5: reg 18 io port: [0x1c60-0x1c67]
pci 0000:00:1f.5: reg 1c io port: [0x1c58-0x1c5b]
pci 0000:00:1f.5: reg 20 io port: [0x1c30-0x1c3f]
pci 0000:00:1f.5: reg 24 io port: [0x1c20-0x1c2f]
pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xce100000-0xce103fff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xce180000-0xce1bffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xce100000-0xce1fffff]
pci 0000:08:00.0: reg 10 32bit mmio: [0xce260000-0xce27ffff]
pci 0000:08:00.0: reg 14 32bit mmio: [0xce240000-0xce25ffff]
pci 0000:08:00.0: reg 18 io port: [0x3000-0x301f]
pci 0000:08:00.0: reg 1c 32bit mmio: [0xce200000-0xce203fff]
pci 0000:08:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:08:00.1: reg 10 32bit mmio: [0xce2c0000-0xce2dffff]
pci 0000:08:00.1: reg 14 32bit mmio: [0xce2a0000-0xce2bffff]
pci 0000:08:00.1: reg 18 io port: [0x3020-0x303f]
pci 0000:08:00.1: reg 1c 32bit mmio: [0xce204000-0xce207fff]
pci 0000:08:00.1: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:08:00.1: PME# supported from D0 D3hot D3cold
pci 0000:08:00.1: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xce200000-0xce2fffff]
pci 0000:09:00.0: reg 10 32bit mmio pref: [0xcf000000-0xcfffffff]
pci 0000:09:00.0: reg 14 32bit mmio: [0xce300000-0xce303fff]
pci 0000:09:00.0: reg 18 32bit mmio: [0xce800000-0xceffffff]
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: bridge 32bit mmio: [0xce300000-0xceffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xcf000000-0xcfffffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE3_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE7_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE8_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE9_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1E._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
xen_balloon: Initialising balloon driver with page order 0.
vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
xen: registering gsi 8 triggering 1 polarity 0
xen_allocate_pirq: returning irq 8 for gsi 8
xen: --> irq=8
xen: registering gsi 13 triggering 1 polarity 0
xen_allocate_pirq: returning irq 13 for gsi 13
xen: --> irq=13
xen: registering gsi 4 triggering 1 polarity 0
xen_allocate_pirq: returning irq 4 for gsi 4
xen: --> irq=4
xen: registering gsi 3 triggering 1 polarity 0
xen_allocate_pirq: returning irq 3 for gsi 3
xen: --> irq=3
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
system 00:04: ioport range 0x200-0x20f has been reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0x500-0x57f has been reserved
system 00:04: ioport range 0x800-0x80f has been reserved
system 00:04: ioport range 0x810-0x81f has been reserved
system 00:04: ioport range 0xca0-0xca1 has been reserved
system 00:04: ioport range 0xca4-0xca7 has been reserved
system 00:04: ioport range 0xca8-0xcab has been reserved
system 00:04: ioport range 0xcae-0xcaf has been reserved
system 00:04: ioport range 0xe00-0xe7f has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1100-0x110f has been reserved
system 00:04: ioport range 0x1180-0x11ff has been reserved
system 00:04: ioport range 0xfe00-0xfe00 has been reserved
system 00:04: ioport range 0xff00-0xff00 has been reserved
system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:04: iomem range 0xfed1c000-0xfed1ffff has been reserved
PM-Timer failed consistency check (0x0xffffff) - aborting.
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xce100000-0xce1fffff
pci 0000:00:01.0: PREFETCH window: 0x80000000-0x800fffff
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: disabled
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
pci 0000:00:05.0: IO window: disabled
pci 0000:00:05.0: MEM window: disabled
pci 0000:00:05.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:08.0: PCI bridge, secondary bus 0000:05
pci 0000:00:08.0: IO window: disabled
pci 0000:00:08.0: MEM window: disabled
pci 0000:00:08.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:06
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: disabled
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07
pci 0000:00:0a.0: IO window: disabled
pci 0000:00:0a.0: MEM window: disabled
pci 0000:00:0a.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.0: IO window: 0x3000-0x3fff
pci 0000:00:1c.0: MEM window: 0xce200000-0xce2fffff
pci 0000:00:1c.0: PREFETCH window: 0x80100000-0x802fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.4: IO window: 0x4000-0x4fff
pci 0000:00:1c.4: MEM window: 0xce300000-0xceffffff
pci 0000:00:1c.4: PREFETCH window: 0x000000cf000000-0x000000cfffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
xen: registering gsi 28 triggering 0 polarity 1
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
xen: --> irq=28
pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
pci 0000:00:01.0: setting latency timer to 64
xen: registering gsi 24 triggering 0 polarity 1
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
xen: --> irq=24
pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
pci 0000:00:03.0: setting latency timer to 64
xen: registering gsi 26 triggering 0 polarity 1
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
xen: --> irq=26
pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:05.0: setting latency timer to 64
xen: registering gsi 30 triggering 0 polarity 1
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
xen: --> irq=30
pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
pci 0000:00:07.0: setting latency timer to 64
xen: registering gsi 31 triggering 0 polarity 1
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
xen: --> irq=31
pci 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:08.0: setting latency timer to 64
xen: registering gsi 32 triggering 0 polarity 1
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
xen: --> irq=32
pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:09.0: setting latency timer to 64
xen: registering gsi 33 triggering 0 polarity 1
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
xen: --> irq=33
pci 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
pci 0000:00:0a.0: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
xen: --> irq=16
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:ff: resource 0 io: [0x00-0xffff]
pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:fe: resource 0 io: [0x00-0xffff]
pci_bus 0000:fe: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xce100000-0xce1fffff]
pci_bus 0000:01: resource 2 pref mem [0x80000000-0x800fffff]
pci_bus 0000:08: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:08: resource 1 mem: [0xce200000-0xce2fffff]
pci_bus 0000:08: resource 2 pref mem [0x80100000-0x802fffff]
pci_bus 0000:09: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:09: resource 1 mem: [0xce300000-0xceffffff]
pci_bus 0000:09: resource 2 pref mem [0xcf000000-0xcfffffff]
pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:08:00.0: Disabling L0s
pci 0000:08:00.1: Disabling L0s
pci 0000:09:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 29296k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
DMA: Placing 64MB software IO TLB between ffff880005787000 - ffff880009787000
DMA: software IO TLB at phys 0x5787000 - 0x9787000
Simple Boot Flag at 0x7c set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1303379825.899:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3876
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 4269 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 4268 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 4267 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:05.0: setting latency timer to 64
alloc irq_desc for 4266 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 4265 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:08.0: setting latency timer to 64
alloc irq_desc for 4264 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 4263 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 4262 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 4261 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: setting latency timer to 64
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:08.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0a.0:pcie02: AER service couldn't init device: no _OSC support
registering netback
alloc irq_desc for 4260 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4259 on node -1
alloc kstat_irqs on node -1
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2011-04-21 09:57:05 UTC (1303379825)
Initalizing network drop monitor service
Freeing unused kernel memory: 604k freed
Write protecting the kernel read-only data: 4332k
udev[215]: starting version 164
SCSI subsystem initialized
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
megasas: 0x1000:0x0079:0x1734:0x1176: bus 1:slot 0:func 0
xen: registering gsi 28 triggering 0 polarity 1
xen_allocate_pirq: returning irq 28 for gsi 28
xen: --> irq=28
Already setup the GSI :28
megaraid_sas 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
megaraid_sas 0000:01:00.0: setting latency timer to 64
megasas: FW now in Ready state
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
dca service started, version 1.12.1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xen: registering gsi 18 triggering 0 polarity 1
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
xen: --> irq=18
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
Copyright (c) 2007-2009 Intel Corporation.
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
igb 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:08:00.0: setting latency timer to 64
alloc irq_desc for 4258 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4257 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4256 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4255 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4254 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4253 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4252 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
alloc irq_desc for 4251 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xce000000
alloc irq_desc for 4250 on node -1
alloc kstat_irqs on node -1
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:4:0: Direct-Access FUJITSU MBE2073RC 5204 PQ: 0 ANSI: 5
scsi 0:0:5:0: Direct-Access FUJITSU MBE2073RC 5204 PQ: 0 ANSI: 5
scsi 0:0:6:0: Direct-Access SEAGATE ST9146803SS 3104 PQ: 0 ANSI: 5
scsi 0:0:7:0: Direct-Access SEAGATE ST9146803SS 3104 PQ: 0 ANSI: 5
scsi 0:0:8:0: Direct-Access FUJITSU MBC2073RC 5201 PQ: 0 ANSI: 5
scsi 0:0:9:0: Direct-Access FUJITSU MBC2073RC 5201 PQ: 0 ANSI: 5
scsi 0:0:10:0: Direct-Access FUJITSU MBE2073RC 5201 PQ: 0 ANSI: 5
scsi 0:0:11:0: Direct-Access FUJITSU MBC2073RC 5201 PQ: 0 ANSI: 5
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ata_piix 0000:00:1f.2: version 2.13
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
ata_piix 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c10 irq 16
ata2: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c18 irq 16
xen: registering gsi 23 triggering 0 polarity 1
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
xen: --> irq=23
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xce001000
scsi 0:2:0:0: Direct-Access LSI RAID 5/6 SAS 6G 2.40 PQ: 0 ANSI: 5
scsi 0:2:1:0: Direct-Access LSI RAID 5/6 SAS 6G 2.40 PQ: 0 ANSI: 5
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
xen: registering gsi 17 triggering 0 polarity 1
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
xen: --> irq=17
ata_piix 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1c68 ctl 0x1c5c bmdma 0x1c30 irq 17
ata4: SATA max UDMA/133 cmd 0x1c60 ctl 0x1c58 bmdma 0x1c38 irq 17
sd 0:2:0:0: [sda] 142278656 512-byte logical blocks: (72.8 GB/67.8 GiB)
sd 0:2:1:0: [sdb] 284557312 512-byte logical blocks: (145 GB/135 GiB)
sd 0:2:1:0: [sdb] Write Protect is off
sd 0:2:1:0: [sdb] Mode Sense: 1f 00 10 08
sd 0:2:1:0: [sdb] Write cache: disabled, read cache: disabled, supports DPO and FUA
sdb:
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
unknown partition table
sd 0:2:1:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:2:0:0: [sda] Attached SCSI disk
uhci_hcd: USB Universal Host Controller Interface driver
xen: registering gsi 19 triggering 0 polarity 1
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
xen: --> irq=19
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 19, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xen: registering gsi 18 triggering 0 polarity 1
xen_allocate_pirq: returning irq 18 for gsi 18
xen: --> irq=18
Already setup the GSI :18
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xen: registering gsi 18 triggering 0 polarity 1
xen_allocate_pirq: returning irq 18 for gsi 18
xen: --> irq=18
Already setup the GSI :18
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xen: registering gsi 23 triggering 0 polarity 1
xen_allocate_pirq: returning irq 23 for gsi 23
xen: --> irq=23
Already setup the GSI :23
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xen: registering gsi 22 triggering 0 polarity 1
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
xen: --> irq=22
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018a0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xen: registering gsi 21 triggering 0 polarity 1
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
xen: --> irq=21
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018c0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:19:99:97:ec:a4
igb 0000:08:00.0: eth0: PBA No: 313130-032
igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
xen: registering gsi 17 triggering 0 polarity 1
xen_allocate_pirq: returning irq 17 for gsi 17
xen: --> irq=17
Already setup the GSI :17
igb 0000:08:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
igb 0000:08:00.1: setting latency timer to 64
alloc irq_desc for 4249 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4248 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4247 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4246 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4245 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4244 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4243 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4242 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4241 on node -1
alloc kstat_irqs on node -1
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:19:99:97:ec:a5
igb 0000:08:00.1: eth1: PBA No: 313130-032
igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 7-1: new low speed USB device using uhci_hcd and address 2
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
usb 7-1: New USB device found, idVendor=0624, idProduct=0341
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: HP 336047-B21
usb 7-1: Manufacturer: Avocent
usb 7-1: configuration #1 chosen from 1 choice
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.01: link offline, clearing class 3 to NONE
ata1.00: ATAPI: HL-DT-STDVDRAM_GT30N, FT03, max UDMA/100
ata1.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM_GT30N FT03 PQ: 0 ANSI: 5
usbcore: registered new interface driver hiddev
input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input1
generic-usb 0003:0624:0341.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:1d.1-1/input0
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:1:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input2
generic-usb 0003:0624:0341.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
PM: Starting manual resume from disk
PM: Resume from partition 8:2
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udev[604]: starting version 164
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: AC Adapter [PSD] (on-line)
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
C2[C2] C3[C3])
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
input: PC Speaker as /devices/platform/pcspkr/input/input5
power_meter ACPI000D:00: Found ACPI power meter.
ACPI Warning for \_SB_.SPM_._PMD: Return Package type mismatch at index 0 - found String, expected Reference (20090903/nspredef-1012)
xen: registering gsi 17 triggering 0 polarity 1
xen_allocate_pirq: returning irq 17 for gsi 17
xen: --> irq=17
Already setup the GSI :17
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Error: Driver 'pcspkr' is already registered, aborting...
Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
EXT3 FS on sda1, internal journal
loop: module loaded
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
Event-channel device installed.
alloc irq_desc for 4240 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4239 on node -1
alloc kstat_irqs on node -1
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
Bridge firewalling registered
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Mar 8 00:01:30 UTC 2011
Command line: placeholder root=UUID=5512594d-06f6-4802-890a-d58aee86f324 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
xen_release_chunk: looking at area pfn c0000-e0000: 131072 pages freed
xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed
xen_release_chunk: looking at area pfn fed00-fee00: 256 pages freed
xen_release_chunk: looking at area pfn fee01-ffa00: 3071 pages freed
released 194815 pages of unused memory
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009c400 (usable)
Xen: 000000000009c400 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 00000000bf7a0000 (usable)
Xen: 00000000bf7a0000 - 00000000bf7b9000 (ACPI data)
Xen: 00000000bf7b9000 - 00000000bf7ba000 (ACPI NVS)
Xen: 00000000bf7ba000 - 00000000c0000000 (reserved)
Xen: 00000000e0000000 - 00000000f0000000 (reserved)
Xen: 00000000fec00000 - 00000000fed00000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ffa00000 - 0000000100000000 (reserved)
Xen: 0000000100000000 - 00000001f0646000 (usable)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x1f0646 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
last_pfn = 0xbf7a0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf7a0000
0000000000 - 00bf7a0000 page 4k
kernel direct mapping tables up to bf7a0000 @ 100000-700000
init_memory_mapping: 0000000100000000-00000001f0646000
0100000000 - 01f0646000 page 4k
kernel direct mapping tables up to 1f0646000 @ 4300000-528d000
RAMDISK: 016ba000 - 03356000
ACPI: RSDP 00000000000f7ec0 00024 (v02 PTLTD )
ACPI: XSDT 00000000bf7afb5d 0019C (v01 PTLTD ? XSDT 00060000 LTP 00000000)
ACPI: FACP 00000000bf7b5c1d 000F4 (v03 FSC TYLERBRG 00060000 PTL 000F4240)
ACPI: DSDT 00000000bf7afcf9 05EA0 (v01 FSC D2619 00060000 MSFT 03000001)
ACPI: FACS 00000000bf7b9fc0 00040
ACPI: TCPA 00000000bf7b5d11 00032 (v01 Phoeni x 00060000 TL 00000000)
ACPI: SLIT 00000000bf7b5d43 00030 (v01 FSC 00060000 0000005A)
ACPI: SRAT 00000000bf7b5d73 001A8 (v01 Intel Tylerbrg 00060000 PHX. 00000001)
ACPI: SSDT 00000000bf7b5f1b 000D8 (v01 FSC CST_PR00 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b5ff3 000D8 (v01 FSC CST_PR01 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b60cb 000D8 (v01 FSC CST_PR02 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b61a3 000D8 (v01 FSC CST_PR03 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b627b 000D8 (v01 FSC CST_PR12 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6353 000D8 (v01 FSC CST_PR13 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b642b 000D8 (v01 FSC CST_PR14 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6503 000D8 (v01 FSC CST_PR15 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b65db 000D8 (v01 FSC CST_PR20 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b66b3 000D8 (v01 FSC CST_PR21 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b678b 000D8 (v01 FSC CST_PR22 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6863 000D8 (v01 FSC CST_PR23 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b693b 000D8 (v01 FSC CST_PR32 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6a13 000D8 (v01 FSC CST_PR33 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6aeb 000D8 (v01 FSC CST_PR34 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6bc3 000D8 (v01 FSC CST_PR35 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6c9b 0017C (v01 FSC PST_PR00 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6e17 0017C (v01 FSC PST_PR01 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b6f93 0017C (v01 FSC PST_PR02 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b710f 0017C (v01 FSC PST_PR03 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b728b 0017C (v01 FSC PST_PR12 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7407 0017C (v01 FSC PST_PR13 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7583 0017C (v01 FSC PST_PR14 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b76ff 0017C (v01 FSC PST_PR15 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b787b 0017C (v01 FSC PST_PR20 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b79f7 0017C (v01 FSC PST_PR21 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7b73 0017C (v01 FSC PST_PR22 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7cef 0017C (v01 FSC PST_PR23 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7e6b 0017C (v01 FSC PST_PR32 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b7fe7 0017C (v01 FSC PST_PR33 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b8163 0017C (v01 FSC PST_PR34 00060000 CSF 00000001)
ACPI: SSDT 00000000bf7b82df 0017C (v01 FSC PST_PR35 00060000 CSF 00000001)
ACPI: EINJ 00000000bf7b845b 001B0 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: HEST 00000000bf7b860b 00268 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: BERT 00000000bf7b8873 00030 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: SSDT 00000000bf7b88a3 000E1 (v01 wheaos wheaosc 00060000 INTL 20050624)
ACPI: ERST 00000000bf7b8984 00270 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: SPCR 00000000bf7b8bf4 00050 (v01 PTLTD $UCRTBL$ 00060000 PTL 00000001)
ACPI: XMAR 00000000bf7b8c44 001E8 (v01 Intel OEMDMAR 00060000 LOHR 00000001)
ACPI: MCFG 00000000bf7b8e2c 0003C (v01 PTLTD MCFG 00060000 LTP 00000000)
ACPI: HPET 00000000bf7b8e68 00038 (v01 PTLTD HPETTBL 00060000 LTP 00000001)
ACPI: APIC 00000000bf7b8ea0 00138 (v01 PTLTD ? APIC 00060000 LTP 00000000)
ACPI: BOOT 00000000bf7b8fd8 00028 (v01 PTLTD $SBFTBL$ 00060000 LTP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000001f0646000
Bootmem setup node 0 0000000000000000-00000001f0646000
NODE_DATA [0000000000010040 - 000000000001803f]
bootmap [0000000000019000 - 00000000000570cf] pages 3f
(10 early reservations) ==> bootmem [0000000000 - 01f0646000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [00042db000 - 0004300000] XEN PAGETABLES ==> [00042db000 - 0004300000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#3 [0001000000 - 00016999d4] TEXT DATA BSS ==> [0001000000 - 00016999d4]
#4 [00016ba000 - 0003356000] RAMDISK ==> [00016ba000 - 0003356000]
#5 [0003356000 - 00042db000] XEN START INFO ==> [0003356000 - 00042db000]
#6 [000169a000 - 000169a2d8] BRK ==> [000169a000 - 000169a2d8]
#7 [0000100000 - 00006d8000] PGTABLE ==> [0000100000 - 00006d8000]
#8 [0004300000 - 0004a88000] PGTABLE ==> [0004300000 - 0004a88000]
#9 [0000010000 - 0000010030] ACPI SLIT ==> [0000010000 - 0000010030]
found SMP MP-table at [ffff8800000f7ef0] f7ef0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x001f0646
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x000bf7a0
0: 0x00100000 -> 0x001f0646
On node 0 totalpages: 1768818
DMA zone: 56 pages used for memmap
DMA zone: 1499 pages reserved
DMA zone: 2425 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765912 pages, LIFO batch:31
Normal zone: 13462 pages used for memmap
Normal zone: 971184 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x35] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-0
ACPI: IOAPIC (id[0x05] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 0, address 0xfec80000, GSI 24-24
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ERROR: Unable to locate IOAPIC for GSI 2
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ERROR: Unable to locate IOAPIC for GSI 9
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 280
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 0000000000100000
PM: Registered nosave memory: 00000000bf7a0000 - 00000000bf7b9000
PM: Registered nosave memory: 00000000bf7b9000 - 00000000bf7ba000
PM: Registered nosave memory: 00000000bf7ba000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on Xen
Xen version: 4.0.1 (preserve-AD) (dom0)
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88000ab2a000 s90328 r8192 d24360 u122880
pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
trying to map vcpu_info 0 at ffff88000ab35020, mfn 42b35, offset 32
cpu 0 using vcpu_info at ffff88000ab35020
trying to map vcpu_info 1 at ffff88000ab53020, mfn 42b53, offset 32
cpu 1 using vcpu_info at ffff88000ab53020
trying to map vcpu_info 2 at ffff88000ab71020, mfn 42b71, offset 32
cpu 2 using vcpu_info at ffff88000ab71020
trying to map vcpu_info 3 at ffff88000ab8f020, mfn 42b8f, offset 32
cpu 3 using vcpu_info at ffff88000ab8f020
trying to map vcpu_info 4 at ffff88000abad020, mfn 42bad, offset 32
cpu 4 using vcpu_info at ffff88000abad020
trying to map vcpu_info 5 at ffff88000abcb020, mfn 42bcb, offset 32
cpu 5 using vcpu_info at ffff88000abcb020
trying to map vcpu_info 6 at ffff88000abe9020, mfn 42be9, offset 32
cpu 6 using vcpu_info at ffff88000abe9020
trying to map vcpu_info 7 at ffff88000ac07020, mfn 42c07, offset 32
cpu 7 using vcpu_info at ffff88000ac07020
trying to map vcpu_info 8 at ffff88000ac25020, mfn 42c25, offset 32
cpu 8 using vcpu_info at ffff88000ac25020
trying to map vcpu_info 9 at ffff88000ac43020, mfn 42c43, offset 32
cpu 9 using vcpu_info at ffff88000ac43020
trying to map vcpu_info 10 at ffff88000ac61020, mfn 42c61, offset 32
cpu 10 using vcpu_info at ffff88000ac61020
trying to map vcpu_info 11 at ffff88000ac7f020, mfn 42c7f, offset 32
cpu 11 using vcpu_info at ffff88000ac7f020
trying to map vcpu_info 12 at ffff88000ac9d020, mfn 42c9d, offset 32
cpu 12 using vcpu_info at ffff88000ac9d020
trying to map vcpu_info 13 at ffff88000acbb020, mfn 42cbb, offset 32
cpu 13 using vcpu_info at ffff88000acbb020
trying to map vcpu_info 14 at ffff88000acd9020, mfn 42cd9, offset 32
cpu 14 using vcpu_info at ffff88000acd9020
trying to map vcpu_info 15 at ffff88000acf7020, mfn 42cf7, offset 32
cpu 15 using vcpu_info at ffff88000acf7020
Xen: using vcpu_info placement
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1739521
Policy zone: Normal
Kernel command line: placeholder root=UUID=5512594d-06f6-4802-890a-d58aee86f324 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
DMA: Placing 64MB software IO TLB between ffff88000ad13000 - ffff88000ed13000
DMA: software IO TLB at phys 0xad13000 - 0xed13000
xen_swiotlb_fixup: buf=ffff88000ad13000 size=67108864
xen_swiotlb_fixup: buf=ffff88000ed73000 size=32768
Memory: 6842432k/8132888k available (3148k kernel code, 1057616k absent, 232840k reserved, 1907k data, 604k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:4352
xen: --> irq=0
xen: --> irq=1
xen: --> irq=2
xen: --> irq=3
xen: --> irq=4
xen: --> irq=5
xen: --> irq=6
xen: --> irq=7
xen: --> irq=8
xen: --> irq=9
xen: --> irq=10
xen: --> irq=11
xen: --> irq=12
xen: --> irq=13
xen: --> irq=14
xen: --> irq=15
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
xen: registering gsi 9 triggering 0 polarity 0
xen_allocate_pirq: returning irq 9 for gsi 9
xen: --> irq=9
xen: acpi sci 9
Console: colour VGA+ 80x25
console [tty0] enabled
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
alloc irq_desc for 4351 on node -1
alloc kstat_irqs on node -1
Detected 2400.134 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.26 BogoMIPS (lpj=9600536)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 0/0x0 -> Node 0
CPU: Unsupported number of siblings 32
mce: CPU supports 9 MCE banks
Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
alloc irq_desc for 4350 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4349 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4348 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4347 on node -1
alloc kstat_irqs on node -1
installing Xen timer for CPU 1
alloc irq_desc for 4346 on node -1
alloc kstat_irqs on node -1
SMP alternatives: switching to SMP code
alloc irq_desc for 4345 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4344 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4343 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4342 on node -1
alloc kstat_irqs on node -1
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 1/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 2
alloc irq_desc for 4341 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4340 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4339 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4338 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4337 on node -1
alloc kstat_irqs on node -1
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 2/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 3
alloc irq_desc for 4336 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4335 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4334 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4333 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4332 on node -1
alloc kstat_irqs on node -1
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 3/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 4
alloc irq_desc for 4331 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4330 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4329 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4328 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4327 on node -1
alloc kstat_irqs on node -1
Initializing CPU#4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 4/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 5
alloc irq_desc for 4326 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4325 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4324 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4323 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4322 on node -1
alloc kstat_irqs on node -1
Initializing CPU#5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 5/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 6
alloc irq_desc for 4321 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4320 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4319 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4318 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4317 on node -1
alloc kstat_irqs on node -1
Initializing CPU#6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 6/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 7
alloc irq_desc for 4316 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4315 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4314 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4313 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4312 on node -1
alloc kstat_irqs on node -1
Initializing CPU#7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 7/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 8
alloc irq_desc for 4311 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4310 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4309 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4308 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4307 on node -1
alloc kstat_irqs on node -1
Initializing CPU#8
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 8/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 9
alloc irq_desc for 4306 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4305 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4304 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4303 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4302 on node -1
alloc kstat_irqs on node -1
Initializing CPU#9
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 9/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 10
alloc irq_desc for 4301 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4300 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4299 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4298 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4297 on node -1
alloc kstat_irqs on node -1
Initializing CPU#10
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 10/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 11
alloc irq_desc for 4296 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4295 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4294 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4293 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4292 on node -1
alloc kstat_irqs on node -1
Initializing CPU#11
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 11/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 12
alloc irq_desc for 4291 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4290 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4289 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4288 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4287 on node -1
alloc kstat_irqs on node -1
Initializing CPU#12
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 12/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 13
alloc irq_desc for 4286 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4285 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4284 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4283 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4282 on node -1
alloc kstat_irqs on node -1
Initializing CPU#13
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 13/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 14
alloc irq_desc for 4281 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4280 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4279 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4278 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4277 on node -1
alloc kstat_irqs on node -1
Initializing CPU#14
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 14/0x0 -> Node 0
CPU: Unsupported number of siblings 32
installing Xen timer for CPU 15
alloc irq_desc for 4276 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4275 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4274 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4273 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4272 on node -1
alloc kstat_irqs on node -1
Initializing CPU#15
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 15/0x0 -> Node 0
CPU: Unsupported number of siblings 32
Brought up 16 CPUs
CPU0 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CPU1 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0
CPU2 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 1
CPU3 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 3 4 5 6 7 8 9 10 11 12 13 14 15 0 1 2
CPU4 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 4 5 6 7 8 9 10 11 12 13 14 15 0 1 2 3
CPU5 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 5 6 7 8 9 10 11 12 13 14 15 0 1 2 3 4
CPU6 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 6 7 8 9 10 11 12 13 14 15 0 1 2 3 4 5
CPU7 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 7 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6
CPU8 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7
CPU9 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7 8
CPU10 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 10 11 12 13 14 15 0 1 2 3 4 5 6 7 8 9
CPU11 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 11 12 13 14 15 0 1 2 3 4 5 6 7 8 9 10
CPU12 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 12 13 14 15 0 1 2 3 4 5 6 7 8 9 10 11
CPU13 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 13 14 15 0 1 2 3 4 5 6 7 8 9 10 11 12
CPU14 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 14 15 0 1 2 3 4 5 6 7 8 9 10 11 12 13
CPU15 attaching sched-domain:
domain 0: span 0-15 level CPU
groups: 15 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
devtmpfs: initialized
Grant table initialized
regulator: core version 0.5
NET: Registered protocol family 16
alloc irq_desc for 4271 on node -1
alloc kstat_irqs on node -1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
sync cpu 0 get result 1 max_id f
sync cpu 1 get result 1 max_id f
sync cpu 2 get result 1 max_id f
sync cpu 3 get result 1 max_id f
sync cpu 4 get result 1 max_id f
sync cpu 5 get result 1 max_id f
sync cpu 6 get result 1 max_id f
sync cpu 7 get result 1 max_id f
sync cpu 8 get result 1 max_id f
sync cpu 9 get result 1 max_id f
sync cpu a get result 1 max_id f
sync cpu b get result 1 max_id f
sync cpu c get result 1 max_id f
sync cpu d get result 1 max_id f
sync cpu e get result 1 max_id f
sync cpu f get result 1 max_id f
alloc irq_desc for 4270 on node -1
alloc kstat_irqs on node -1
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 10
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e0afffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ERROR: Unable to locate IOAPIC for GSI 9
ACPI: EC: Look up EC in DSDT
ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 7
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [CPU0] (0000:ff)
ACPI: PCI Root Bridge [CPU1] (0000:fe)
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xce000000-0xce0003ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xce001000-0xce0013ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57]
pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47]
pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43]
pci 0000:00:1f.2: reg 20 io port: [0x1c10-0x1c1f]
pci 0000:00:1f.2: reg 24 io port: [0x1c00-0x1c0f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xce002000-0xce0020ff]
pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1f.5: reg 10 io port: [0x1c68-0x1c6f]
pci 0000:00:1f.5: reg 14 io port: [0x1c5c-0x1c5f]
pci 0000:00:1f.5: reg 18 io port: [0x1c60-0x1c67]
pci 0000:00:1f.5: reg 1c io port: [0x1c58-0x1c5b]
pci 0000:00:1f.5: reg 20 io port: [0x1c30-0x1c3f]
pci 0000:00:1f.5: reg 24 io port: [0x1c20-0x1c2f]
pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xce100000-0xce103fff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xce180000-0xce1bffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xce100000-0xce1fffff]
pci 0000:08:00.0: reg 10 32bit mmio: [0xce260000-0xce27ffff]
pci 0000:08:00.0: reg 14 32bit mmio: [0xce240000-0xce25ffff]
pci 0000:08:00.0: reg 18 io port: [0x3000-0x301f]
pci 0000:08:00.0: reg 1c 32bit mmio: [0xce200000-0xce203fff]
pci 0000:08:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:08:00.1: reg 10 32bit mmio: [0xce2c0000-0xce2dffff]
pci 0000:08:00.1: reg 14 32bit mmio: [0xce2a0000-0xce2bffff]
pci 0000:08:00.1: reg 18 io port: [0x3020-0x303f]
pci 0000:08:00.1: reg 1c 32bit mmio: [0xce204000-0xce207fff]
pci 0000:08:00.1: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:08:00.1: PME# supported from D0 D3hot D3cold
pci 0000:08:00.1: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xce200000-0xce2fffff]
pci 0000:09:00.0: reg 10 32bit mmio pref: [0xcf000000-0xcfffffff]
pci 0000:09:00.0: reg 14 32bit mmio: [0xce300000-0xce303fff]
pci 0000:09:00.0: reg 18 32bit mmio: [0xce800000-0xceffffff]
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: bridge 32bit mmio: [0xce300000-0xceffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xcf000000-0xcfffffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE3_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE7_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE8_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE9_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1E._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
xen_balloon: Initialising balloon driver with page order 0.
vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
xen: registering gsi 8 triggering 1 polarity 0
xen_allocate_pirq: returning irq 8 for gsi 8
xen: --> irq=8
xen: registering gsi 13 triggering 1 polarity 0
xen_allocate_pirq: returning irq 13 for gsi 13
xen: --> irq=13
xen: registering gsi 4 triggering 1 polarity 0
xen_allocate_pirq: returning irq 4 for gsi 4
xen: --> irq=4
xen: registering gsi 3 triggering 1 polarity 0
xen_allocate_pirq: returning irq 3 for gsi 3
xen: --> irq=3
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
system 00:04: ioport range 0x200-0x20f has been reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0x500-0x57f has been reserved
system 00:04: ioport range 0x800-0x80f has been reserved
system 00:04: ioport range 0x810-0x81f has been reserved
system 00:04: ioport range 0xca0-0xca1 has been reserved
system 00:04: ioport range 0xca4-0xca7 has been reserved
system 00:04: ioport range 0xca8-0xcab has been reserved
system 00:04: ioport range 0xcae-0xcaf has been reserved
system 00:04: ioport range 0xe00-0xe7f has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1100-0x110f has been reserved
system 00:04: ioport range 0x1180-0x11ff has been reserved
system 00:04: ioport range 0xfe00-0xfe00 has been reserved
system 00:04: ioport range 0xff00-0xff00 has been reserved
system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:04: iomem range 0xfed1c000-0xfed1ffff has been reserved
PM-Timer failed consistency check (0x0xffffff) - aborting.
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xce100000-0xce1fffff
pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xc00fffff
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: disabled
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
pci 0000:00:05.0: IO window: disabled
pci 0000:00:05.0: MEM window: disabled
pci 0000:00:05.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:08.0: PCI bridge, secondary bus 0000:05
pci 0000:00:08.0: IO window: disabled
pci 0000:00:08.0: MEM window: disabled
pci 0000:00:08.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:06
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: disabled
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07
pci 0000:00:0a.0: IO window: disabled
pci 0000:00:0a.0: MEM window: disabled
pci 0000:00:0a.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.0: IO window: 0x3000-0x3fff
pci 0000:00:1c.0: MEM window: 0xce200000-0xce2fffff
pci 0000:00:1c.0: PREFETCH window: 0xc0100000-0xc02fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.4: IO window: 0x4000-0x4fff
pci 0000:00:1c.4: MEM window: 0xce300000-0xceffffff
pci 0000:00:1c.4: PREFETCH window: 0x000000cf000000-0x000000cfffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
xen: registering gsi 28 triggering 0 polarity 1
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
xen: --> irq=28
pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
pci 0000:00:01.0: setting latency timer to 64
xen: registering gsi 24 triggering 0 polarity 1
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
xen: --> irq=24
pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
pci 0000:00:03.0: setting latency timer to 64
xen: registering gsi 26 triggering 0 polarity 1
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
xen: --> irq=26
pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:05.0: setting latency timer to 64
xen: registering gsi 30 triggering 0 polarity 1
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
xen: --> irq=30
pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
pci 0000:00:07.0: setting latency timer to 64
xen: registering gsi 31 triggering 0 polarity 1
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
xen: --> irq=31
pci 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:08.0: setting latency timer to 64
xen: registering gsi 32 triggering 0 polarity 1
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
xen: --> irq=32
pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:09.0: setting latency timer to 64
xen: registering gsi 33 triggering 0 polarity 1
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
xen: --> irq=33
pci 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
pci 0000:00:0a.0: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
xen: --> irq=16
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:ff: resource 0 io: [0x00-0xffff]
pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:fe: resource 0 io: [0x00-0xffff]
pci_bus 0000:fe: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xce100000-0xce1fffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xc00fffff]
pci_bus 0000:08: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:08: resource 1 mem: [0xce200000-0xce2fffff]
pci_bus 0000:08: resource 2 pref mem [0xc0100000-0xc02fffff]
pci_bus 0000:09: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:09: resource 1 mem: [0xce300000-0xceffffff]
pci_bus 0000:09: resource 2 pref mem [0xcf000000-0xcfffffff]
pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:08:00.0: Disabling L0s
pci 0000:08:00.1: Disabling L0s
pci 0000:09:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 29296k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
DMA: Placing 64MB software IO TLB between ffff88000ad13000 - ffff88000ed13000
DMA: software IO TLB at phys 0xad13000 - 0xed13000
Simple Boot Flag at 0x7c set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1301390664.393:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 13421
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 4269 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 4268 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 4267 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:05.0: setting latency timer to 64
alloc irq_desc for 4266 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 4265 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:08.0: setting latency timer to 64
alloc irq_desc for 4264 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 4263 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 4262 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 4261 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: setting latency timer to 64
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:08.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0a.0:pcie02: AER service couldn't init device: no _OSC support
registering netback
alloc irq_desc for 4260 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4259 on node -1
alloc kstat_irqs on node -1
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2011-03-29 09:24:23 UTC (1301390663)
Initalizing network drop monitor service
Freeing unused kernel memory: 604k freed
Write protecting the kernel read-only data: 4332k
udev[215]: starting version 164
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
dca service started, version 1.12.1
libata version 3.00 loaded.
Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
Copyright (c) 2007-2009 Intel Corporation.
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
igb 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:08:00.0: setting latency timer to 64
alloc irq_desc for 4258 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4257 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4256 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4255 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4254 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4253 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4252 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4251 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4250 on node -1
alloc kstat_irqs on node -1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xen: registering gsi 18 triggering 0 polarity 1
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
xen: --> irq=18
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xce000000
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
megasas: 0x1000:0x0079:0x1734:0x1176: bus 1:slot 0:func 0
xen: registering gsi 28 triggering 0 polarity 1
xen_allocate_pirq: returning irq 28 for gsi 28
xen: --> irq=28
Already setup the GSI :28
megaraid_sas 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
megaraid_sas 0000:01:00.0: setting latency timer to 64
megasas: FW now in Ready state
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ata_piix 0000:00:1f.2: version 2.13
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
ata_piix 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c10 irq 16
ata2: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c18 irq 16
xen: registering gsi 19 triggering 0 polarity 1
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
xen: --> irq=19
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.0: irq 19, io base 0x00001820
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xen: registering gsi 23 triggering 0 polarity 1
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
xen: --> irq=23
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
scsi0 : LSI SAS based MegaRAID driver
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
scsi 0:0:4:0: Direct-Access FUJITSU MBE2073RC 5204 PQ: 0 ANSI: 5
scsi 0:0:5:0: Direct-Access FUJITSU MBE2073RC 5204 PQ: 0 ANSI: 5
scsi 0:0:6:0: Direct-Access SEAGATE ST9146803SS 3104 PQ: 0 ANSI: 5
scsi 0:0:7:0: Direct-Access SEAGATE ST9146803SS 3104 PQ: 0 ANSI: 5
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xce001000
scsi 0:0:8:0: Direct-Access FUJITSU MBC2073RC 5201 PQ: 0 ANSI: 5
scsi 0:0:9:0: Direct-Access FUJITSU MBC2073RC 5201 PQ: 0 ANSI: 5
scsi 0:0:10:0: Direct-Access FUJITSU MBE2073RC 5201 PQ: 0 ANSI: 5
scsi 0:0:11:0: Direct-Access FUJITSU MBC2073RC 5201 PQ: 0 ANSI: 5
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.7
usb usb3: configuration #1 chosen from 1 choice
scsi 0:2:0:0: Direct-Access LSI RAID 5/6 SAS 6G 2.40 PQ: 0 ANSI: 5
scsi 0:2:1:0: Direct-Access LSI RAID 5/6 SAS 6G 2.40 PQ: 0 ANSI: 5
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
xen: registering gsi 17 triggering 0 polarity 1
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
xen: --> irq=17
ata_piix 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1c68 ctl 0x1c5c bmdma 0x1c30 irq 17
ata4: SATA max UDMA/133 cmd 0x1c60 ctl 0x1c58 bmdma 0x1c38 irq 17
xen: registering gsi 18 triggering 0 polarity 1
xen_allocate_pirq: returning irq 18 for gsi 18
xen: --> irq=18
Already setup the GSI :18
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xen: registering gsi 18 triggering 0 polarity 1
xen_allocate_pirq: returning irq 18 for gsi 18
xen: --> irq=18
Already setup the GSI :18
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xen: registering gsi 23 triggering 0 polarity 1
xen_allocate_pirq: returning irq 23 for gsi 23
xen: --> irq=23
Already setup the GSI :23
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xen: registering gsi 22 triggering 0 polarity 1
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
xen: --> irq=22
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018a0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xen: registering gsi 21 triggering 0 polarity 1
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
xen: --> irq=21
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018c0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:19:99:97:ec:a4
igb 0000:08:00.0: eth0: PBA No: 313130-032
igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
xen: registering gsi 17 triggering 0 polarity 1
xen_allocate_pirq: returning irq 17 for gsi 17
xen: --> irq=17
Already setup the GSI :17
igb 0000:08:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
igb 0000:08:00.1: setting latency timer to 64
alloc irq_desc for 4249 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4248 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4247 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4246 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4245 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4244 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4243 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4242 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 4241 on node -1
alloc kstat_irqs on node -1
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:19:99:97:ec:a5
igb 0000:08:00.1: eth1: PBA No: 313130-032
igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 7-1: new low speed USB device using uhci_hcd and address 2
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
usb 7-1: New USB device found, idVendor=0624, idProduct=0341
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: HP 336047-B21
usb 7-1: Manufacturer: Avocent
usb 7-1: configuration #1 chosen from 1 choice
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.01: link offline, clearing class 3 to NONE
ata1.00: ATAPI: HL-DT-STDVDRAM_GT30N, FT03, max UDMA/100
ata1.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM_GT30N FT03 PQ: 0 ANSI: 5
usbcore: registered new interface driver hiddev
sd 0:2:0:0: [sda] 142278656 512-byte logical blocks: (72.8 GB/67.8 GiB)
sd 0:2:1:0: [sdb] 284557312 512-byte logical blocks: (145 GB/135 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sd 0:2:1:0: [sdb] Write Protect is off
sd 0:2:1:0: [sdb] Mode Sense: 1f 00 10 08
sda1 sda2 sda3
sd 0:2:1:0: [sdb] Write cache: disabled, read cache: disabled, supports DPO and FUA
sdb: unknown partition table
sd 0:2:1:0: [sdb] Attached SCSI disk
sd 0:2:0:0: [sda] Attached SCSI disk
input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input1
generic-usb 0003:0624:0341.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:1d.1-1/input0
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:1:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input2
generic-usb 0003:0624:0341.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
PM: Starting manual resume from disk
PM: Resume from partition 8:2
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udev[602]: starting version 164
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: AC Adapter [PSD] (on-line)
xen: registering gsi 17 triggering 0 polarity 1
xen_allocate_pirq: returning irq 17 for gsi 17
xen: --> irq=17
Already setup the GSI :17
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
input: PC Speaker as /devices/platform/pcspkr/input/input5
power_meter ACPI000D:00: Found ACPI power meter.
ACPI Warning for \_SB_.SPM_._PMD: Return Package type mismatch at index 0 - found String, expected Reference (20090903/nspredef-1012)
Error: Driver 'pcspkr' is already registered, aborting...
Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
EXT3 FS on sda1, internal journal
loop: module loaded
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
Reply to: