Bug#620278: linux-image-2.6.38-2-amd64: tpm_tis failure increases boot time a llllooootttt
Package: linux-2.6
Version: 2.6.38-2
Severity: normal
Hi,
there are several problems with this linux-image, either the configuration or
patches as a self-compile 2.6.38-rc7 does not suffer from those problems.
The boot process (until login on vt1 is possible) take >6 minutes with the
Debian kernel while the self-compiled (although almost everything that's
needed is compiled-in) kernel takes far less than 1 minute (never measured
this).
If you more information than below, just tell me.
Regards,
Hendrik Sattler
-- Package-specific info:
** Kernel log: boot messages should be attached
[ 11.177753] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input11
[ 129.448119] tpm_tis 00:0b: tpm_transmit: tpm_send: error -62
[...]
Mar 31 19:31:56 yavin4 kernel: [ 360.588423] modprobe D ffff8800b7f90000 0 696 1 0x00000000
Mar 31 19:31:56 yavin4 kernel: [ 360.588434] ffff8800b7f90000 0000000000000086 ffff880000000000 ffff880036deca40
Mar 31 19:31:56 yavin4 kernel: [ 360.588447] 0000000000013700 ffff8800b8f57fd8 ffff8800b8f57fd8 0000000000013700
Mar 31 19:31:56 yavin4 kernel: [ 360.588457] ffff8800b7f90000 ffff8800b8f56010 0000000000000000 00000001b8f57dc0
Mar 31 19:31:56 yavin4 kernel: [ 360.588468] Call Trace:
Mar 31 19:31:56 yavin4 kernel: [ 360.588484] [<ffffffff8132608a>] ? __mutex_lock_common+0x127/0x193
Mar 31 19:31:56 yavin4 kernel: [ 360.588505] [<ffffffff813261c2>] ? mutex_lock+0x1a/0x33
Mar 31 19:31:56 yavin4 kernel: [ 360.588515] [<ffffffff8123e4e7>] ? __driver_attach+0x2e/0x6f
Mar 31 19:31:56 yavin4 kernel: [ 360.588524] [<ffffffff8123e4b9>] ? __driver_attach+0x0/0x6f
Mar 31 19:31:56 yavin4 kernel: [ 360.588532] [<ffffffff8123daac>] ? bus_for_each_dev+0x44/0x78
Mar 31 19:31:56 yavin4 kernel: [ 360.588543] [<ffffffff8123df04>] ? bus_add_driver+0xa8/0x1f0
Mar 31 19:31:56 yavin4 kernel: [ 360.588552] [<ffffffff8123e7b1>] ? driver_register+0x90/0xf8
Mar 31 19:31:56 yavin4 kernel: [ 360.588568] [<ffffffffa035c358>] ? parport_pc_init+0x2a2/0xf4a [parport_pc]
Mar 31 19:31:56 yavin4 kernel: [ 360.588585] [<ffffffffa035c0b6>] ? parport_pc_init+0x0/0xf4a [parport_pc]
Mar 31 19:31:56 yavin4 kernel: [ 360.588594] [<ffffffff81002079>] ? do_one_initcall+0x78/0x131
Mar 31 19:31:56 yavin4 kernel: [ 360.588606] [<ffffffff81075e1a>] ? sys_init_module+0xd3/0x221
Mar 31 19:31:56 yavin4 kernel: [ 360.588614] [<ffffffff81009952>] ? system_call_fastpath+0x16/0x1b
** Model information
sys_vendor: Acer
product_name: TravelMate 6592
product_version: PSMBOU-1234567
chassis_vendor: Acer
chassis_version: N/A
bios_vendor: Acer
bios_version: V1.41
board_vendor: Acer
board_name: TravelMate 6592
board_version: Not Applicable
** PNP information
00:0a PNP0401 ECP printer port
state = disabled
possible resources:
Dependent: 00 - Priority acceptable
port 0x378-0x378, align 0x0, size 0x8, 16-bit address decoding
port 0x778-0x778, align 0x0, size 0x8, 16-bit address decoding
irq 5,7 High-Edge
dma 1,3 8-bit compatible
Dependent: 01 - Priority acceptable
port 0x278-0x278, align 0x0, size 0x8, 16-bit address decoding
port 0x678-0x678, align 0x0, size 0x8, 16-bit address decoding
irq 5,7 High-Edge
dma 1,3 8-bit compatible
Dependent: 02 - Priority acceptable
port 0x3bc-0x3bc, align 0x0, size 0x4, 16-bit address decoding
port 0x7bc-0x7bc, align 0x0, size 0x4, 16-bit address decoding
irq 5,7 High-Edge
dma 1,3 8-bit compatible
00:0b IFX0102 Infineon Trusted Platform Module
state = active
allocated resources:
mem 0xfed40000-0xfed44fff
io 0x4e-0x4f
io 0x1670-0x167f
irq 11
compatible devices:
PNP0c31 (unknown)
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.38-rc7 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii grub-pc 1.99~rc1-8 GRand Unified Bootloader, version
ii linux-doc-2.6.38 2.6.38-2 Linux kernel specific documentatio
Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.29 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.29 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
Reply to: