Package: linux-2.6 Version: 2.6.38-1 Severity: normal After upgrading the kernel, X.org produces garbage in random screen areas. That garbage persists in the windows in which it appears (I'm able to take a screenshot of it). -- Package-specific info: ** Version: Linux version 2.6.38-1-686 (Debian 2.6.38-1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Wed Mar 16 17:37:47 UTC 2011 ** Command line: root=UUID=970a25e2-30c2-4cd0-b6b0-0cc69e297c52 ro quiet splash video=radeonfb:mode_option=1400x1050-24@60 ** Not tainted ** Kernel log: [ 3244.698833] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3244.698840] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3244.698868] usb usb4: root hub lost power or was reset [ 3244.698883] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3244.698890] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3244.698943] pci 0000:00:1e.0: setting latency timer to 64 [ 3244.698960] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3244.698966] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 3244.699139] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3244.699207] tg3 0000:09:00.0: wake-up capability disabled by ACPI [ 3244.699214] tg3 0000:09:00.0: PME# disabled [ 3244.733346] sd 0:0:0:0: [sda] Starting disk [ 3244.793753] serial 00:0c: activated [ 3244.932318] ata2.00: configured for UDMA/33 [ 3245.096041] usb 1-2: reset full speed USB device using uhci_hcd and address 2 [ 3245.541132] usb 1-2.3: reset full speed USB device using uhci_hcd and address 4 [ 3245.953128] usb 1-2.3.2: reset full speed USB device using uhci_hcd and address 5 [ 3246.612253] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3246.628592] ata1.00: configured for UDMA/100 [ 3246.785697] PM: resume of devices complete after 2089.670 msecs [ 3246.785938] PM: Finishing wakeup. [ 3246.785940] Restarting tasks ... [ 3246.792755] usb 1-2.2: USB disconnect, address 3 [ 3246.793015] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 3246.793038] option 1-2.2:1.0: device disconnected [ 3246.793161] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 3246.793180] option 1-2.2:1.1: device disconnected [ 3246.794895] done. [ 3246.794902] video LNXVIDEO:01: Restoring backlight state [ 3246.837714] composite sync not supported [ 3247.362692] composite sync not supported [ 3247.786113] usb 1-2.2: new full speed USB device using uhci_hcd and address 6 [ 3247.923106] usb 1-2.2: New USB device found, idVendor=413c, idProduct=8116 [ 3247.923110] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3247.923113] usb 1-2.2: Product: Novatel Wireless HSDPA Modem [ 3247.923116] usb 1-2.2: Manufacturer: Novatel Wireless [ 3247.929171] option 1-2.2:1.0: GSM modem (1-port) converter detected [ 3247.929307] usb 1-2.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 3247.931136] option 1-2.2:1.1: GSM modem (1-port) converter detected [ 3247.931224] usb 1-2.2: GSM modem (1-port) converter now attached to ttyUSB1 [ 3248.004560] ata1.00: configured for UDMA/100 [ 3248.004567] ata1: EH complete [ 3249.100750] ata1.00: configured for UDMA/100 [ 3249.100761] ata1: EH complete [ 3249.504695] ata1.00: configured for UDMA/100 [ 3249.504706] ata1: EH complete [ 3249.928722] ata1.00: configured for UDMA/100 [ 3249.928732] ata1: EH complete [ 3250.312724] ata1.00: configured for UDMA/100 [ 3250.312735] ata1: EH complete [ 3250.712688] ata1.00: configured for UDMA/100 [ 3250.712699] ata1: EH complete [ 3251.136741] ata1.00: configured for UDMA/100 [ 3251.136752] ata1: EH complete [ 3251.552698] ata1.00: configured for UDMA/100 [ 3251.552709] ata1: EH complete [ 3251.968715] ata1.00: configured for UDMA/100 [ 3251.968726] ata1: EH complete [ 3269.787695] tg3 0000:09:00.0: eth1: Link is up at 1000 Mbps, full duplex [ 3269.787703] tg3 0000:09:00.0: eth1: Flow control is off for TX and off for RX [ 3269.788067] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 3270.276053] device eth1 entered promiscuous mode [ 3270.289209] device eth1 left promiscuous mode [ 3280.744078] eth1: no IPv6 routers present [ 3286.688125] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 3286.856188] usb 3-2: New USB device found, idVendor=04d9, idProduct=1400 [ 3286.856196] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3287.015892] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input11 [ 3287.016382] generic-usb 0003:04D9:1400.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1d.2-2/input0 [ 3287.049198] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.1/input/input12 [ 3287.049521] generic-usb 0003:04D9:1400.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1d.2-2/input1 [ 3287.049558] usbcore: registered new interface driver usbhid [ 3287.049562] usbhid: USB HID core driver [ 5086.461613] FS-Cache: Loaded [ 5086.498179] FS-Cache: Netfs 'cifs' registered for caching [14208.198035] usb 1-2.4: new full speed USB device using uhci_hcd and address 7 [14208.350049] usb 1-2.4: New USB device found, idVendor=413c, idProduct=8103 [14208.350056] usb 1-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [14210.676074] Bluetooth: Generic Bluetooth USB driver ver 0.6 [14210.676292] usbcore: registered new interface driver btusb [14212.036086] b43-phy0: Radio hardware status changed to ENABLED [14212.412090] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [14212.485443] ADDRCONF(NETDEV_UP): wlan2: link is not ready [14213.052138] device wlan2 entered promiscuous mode [14214.694716] device wlan2 left promiscuous mode [14216.384139] wlan2: authenticate with 00:0a:07:52:23:7c (try 1) [14216.393193] wlan2: authenticated [14216.393236] wlan2: associate with 00:0a:07:52:23:7c (try 1) [14216.395543] wlan2: RX AssocResp from 00:0a:07:52:23:7c (capab=0x431 status=0 aid=2) [14216.395548] wlan2: associated [14216.396669] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [14226.624080] wlan2: no IPv6 routers present [14290.442565] wlan2: deauthenticated from 00:0a:07:52:23:7c (Reason: 3) [14290.456130] cfg80211: Calling CRDA for country: DE [14293.736626] usb 1-2.4: USB disconnect, address 7 [14293.738030] btusb_intr_complete: hci0 urb f56e5a00 failed to resubmit (19) [14293.738042] btusb_bulk_complete: hci0 urb f56e5200 failed to resubmit (19) [14293.738246] btusb_bulk_complete: hci0 urb f56e5280 failed to resubmit (19) [14293.738525] btusb_send_frame: hci0 urb d8fedd80 submission failed [14297.008098] b43-phy0: Radio hardware status changed to DISABLED ** Model information not available ** Loaded modules: Module Size Used by btusb 7877 0 md4 2577 0 hmac 2017 1 nls_utf8 928 1 cifs 205649 2 fscache 24710 1 cifs usbhid 25388 0 hid 51616 1 usbhid sco 6039 2 bnep 7739 2 rfcomm 23648 4 l2cap 26999 6 bnep,rfcomm crc16 1043 1 l2cap bluetooth 39747 7 btusb,sco,bnep,rfcomm,l2cap acpi_cpufreq 4429 0 mperf 955 1 acpi_cpufreq cpufreq_conservative 6198 0 cpufreq_powersave 622 0 cpufreq_stats 1942 0 cpufreq_userspace 1492 0 xt_tcpudp 1659 0 iptable_filter 972 0 ip_tables 7834 1 iptable_filter x_tables 9171 3 xt_tcpudp,iptable_filter,ip_tables ppdev 4049 0 parport_pc 15579 0 lp 5594 0 parport 20898 3 ppdev,parport_pc,lp pppoe 6056 0 pppox 1234 1 pppoe sit 8022 0 tunnel4 1489 1 sit ppp_generic 16127 2 pppoe,pppox slhc 3502 1 ppp_generic pktcdvd 20032 1 tun 9695 2 binfmt_misc 4762 1 uinput 5048 1 kvm_intel 37610 0 kvm 214376 1 kvm_intel fuse 48252 1 visor 6796 0 ircomm_tty 13113 0 ircomm 5918 1 ircomm_tty loop 10505 0 snd_hda_codec_idt 37819 1 snd_hda_intel 16433 0 snd_hda_codec 51871 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 3990 1 snd_hda_codec snd_pcm_oss 27020 0 snd_mixer_oss 10065 1 snd_pcm_oss snd_pcm 46902 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss ks959_sir 5195 0 snd_seq_midi 3480 0 snd_rawmidi 12531 1 snd_seq_midi snd_seq_midi_event 3652 1 snd_seq_midi arc4 1010 2 joydev 6906 0 ecb 1421 2 snd_seq 34344 2 snd_seq_midi,snd_seq_midi_event ac 1648 0 b43 135153 0 i915 267668 3 drm_kms_helper 19757 1 i915 drm 121728 4 i915,drm_kms_helper mac80211 153213 1 b43 option 12926 0 cfg80211 99905 2 b43,mac80211 button 3634 1 i915 dell_laptop 6364 0 processor 21043 3 acpi_cpufreq battery 4370 0 dell_wmi 1101 0 sparse_keymap 1940 1 dell_wmi usb_wwan 6582 1 option yenta_socket 15632 0 snd_timer 12379 2 snd_pcm,snd_seq snd_seq_device 3667 3 snd_seq_midi,snd_rawmidi,snd_seq wmi 6202 1 dell_wmi snd 33749 11 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device usbserial 21226 3 visor,option,usb_wwan pcmcia_rsrc 7078 1 yenta_socket serio_raw 2910 0 irda 70715 3 ircomm_tty,ircomm,ks959_sir psmouse 39239 0 power_supply 5535 3 ac,dell_laptop,battery video 9241 1 i915 rfkill 10550 4 bluetooth,cfg80211,dell_laptop evdev 6208 28 tpm_tis 5441 0 dcdbas 3752 1 dell_laptop soundcore 3390 1 snd snd_page_alloc 4933 2 snd_hda_intel,snd_pcm tpm 8118 1 tpm_tis i2c_i801 6198 0 tpm_bios 3455 1 tpm rng_core 2306 1 b43 crc_ccitt 1055 1 irda ext3 92941 1 jbd 31766 1 ext3 mbcache 3686 1 ext3 fan 1742 0 sg 15549 0 sd_mod 25177 3 sr_mod 10794 1 cdrom 26023 2 pktcdvd,sr_mod crc_t10dif 1028 1 sd_mod ata_generic 2191 0 ata_piix 17543 3 thermal 6062 0 ssb 32878 1 b43 libata 123224 2 ata_generic,ata_piix tg3 96079 0 ehci_hcd 29129 0 uhci_hcd 15806 0 mmc_core 46505 2 b43,ssb thermal_sys 9943 4 processor,video,fan,thermal scsi_mod 127777 4 sg,sr_mod,sd_mod,libata usbcore 94046 10 btusb,usbhid,visor,ks959_sir,option,usb_wwan,usbserial,ehci_hcd,uhci_hcd libphy 11583 1 tg3 pcmcia 24628 2 b43,ssb pcmcia_core 8273 3 yenta_socket,pcmcia_rsrc,pcmcia nls_base 4529 3 nls_utf8,cifs,usbcore radeonfb 46328 0 fb_ddc 1005 1 radeonfb i2c_algo_bit 3438 2 i915,radeonfb i2c_core 12965 7 i915,drm_kms_helper,drm,i2c_i801,radeonfb,fb_ddc,i2c_algo_bit ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Dell Device [1028:01c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at eff8 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at efec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at eff80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Dell Device [1028:01c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at efebc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 4a000000-4a1fffff Prefetchable memory behind bridge: 000000004a200000-000000004a3fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: efd00000-efdfffff Prefetchable memory behind bridge: 000000004a400000-000000004a5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: efc00000-efcfffff Prefetchable memory behind bridge: 000000004a600000-000000004a7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:01c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=07, sec-latency=32 I/O behind bridge: 00005000-00005fff Memory behind bridge: 44000000-49ffffff Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: leds-ss4200, intel-rng, iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master]) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 03:01.0 CardBus bridge [0607]: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller [1217:6972] (rev 40) Subsystem: Dell Device [1028:01c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 18 Region 0: Memory at 48000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=07, sec-latency=176 Memory window 0: 40000000-43fff000 (prefetchable) Memory window 1: 44000000-47fff000 I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02) Subsystem: Dell Latitude D620 [1028:01c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at efcf0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 01) Subsystem: Dell Wireless 1490 Dual Band WLAN Mini-Card [1028:0007] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at efdfc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: b43-pci-bridge Kernel modules: ssb ** USB devices: Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 413c:8116 Dell Computer Corp. Wireless 5505 Mobile Broadband (3G HSDPA) Minicard Modem Bus 001 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 001 Device 004: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 001 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 04d9:1400 Holtek Semiconductor, Inc. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 6.0 APT prefers sid APT policy: (500, 'sid'), (500, 'oldstable'), (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.38-1-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.38-1-686 depends on: ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii linux-base 3 Linux image base package ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.38-1-686 recommends: ii firmware-linux-free 2.6.32-28 Binary firmware for various driver ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.38-1-686 suggests: pn grub-pc | extlinux | lilo <none> (no description available) pn linux-doc-2.6.38 <none> (no description available) Versions of packages linux-image-2.6.38-1-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.28 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) Additional package version information: ii libdrm-intel1 2.4.23-3 Userspace interface to intel-specific kernel DRM services -- runtime ii libdrm2 2.4.23-3 Userspace interface to kernel DRM services -- runtime ii xserver-xorg-video-intel 2:2.14.0-4+exp1 X.Org X server -- Intel i8xx, i9xx display driver ii xserver-xorg-core 2:1.9.4-3 Xorg X server - core server -- debconf information: linux-image-2.6.38-1-686/prerm/removing-running-kernel-2.6.38-1-686: true linux-image-2.6.38-1-686/postinst/depmod-error-initrd-2.6.38-1-686: false linux-image-2.6.38-1-686/postinst/ignoring-do-bootloader-2.6.38-1-686: * linux-image-2.6.38-1-686/postinst/missing-firmware-2.6.38-1-686:
Attachment:
2011-03-24-091135_282x317_scrot.png
Description: PNG image
