Bug#619315: linux-image-2.6.32-5-686: Mouse pointer invisible with new kernel (intel graphics)
Package: linux-2.6
Version: 2.6.32-31
Severity: important
With kernel version 2.6.32-30 mouse pointer works as normal.
With the newer kernel 2.6.32-31 the mouse pointer is not visible.
I can see that the pointer is there by 'hovering' above buttons that change colour
when 'hovering' above them. It's just not visible.
Reverting to 2.6.32-30 fixes the problem.
I see in the changelog that some changes relate to the i915 driver, so my guess
would be that some change there is the cause for the problem.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Mar 8 21:36:00 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/swe248_deb-root ro quiet
** Not tainted
** Kernel log:
[ 9.386596] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 9.386787] Console: switching to colour dummy device 80x25
[ 9.388057] Console: switching to colour frame buffer device 128x48
[ 9.393611] phy0: Selected rate control algorithm 'minstrel'
[ 9.394673] ath5k phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
[ 9.394678] ath5k phy0: RF5111 5GHz radio found (0x17)
[ 9.394681] ath5k phy0: RF2111 2GHz radio found (0x23)
[ 9.394776] cfg80211: Calling CRDA for country: US
[ 9.395174] yenta_cardbus 0000:01:0a.0: CardBus bridge found [10cf:10e6]
[ 9.395195] yenta_cardbus 0000:01:0a.0: O2: res at 0x94/0xD4: ea/00
[ 9.395198] yenta_cardbus 0000:01:0a.0: Yenta O2: old bridge, disabling read prefetch/write burst
[ 9.443757] fb0: inteldrmfb frame buffer device
[ 9.443761] registered panic notifier
[ 9.443852] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.512663] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 9.512699] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 9.521337] yenta_cardbus 0000:01:0a.0: ISA IRQ mask 0x0438, PCI irq 11
[ 9.521342] yenta_cardbus 0000:01:0a.0: Socket status: 30000006
[ 9.521353] yenta_cardbus 0000:01:0a.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 9.521359] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[ 9.521674] yenta_cardbus 0000:01:0a.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[ 9.521679] yenta_cardbus 0000:01:0a.0: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
[ 9.522209] yenta_cardbus 0000:01:0a.1: CardBus bridge found [10cf:10e6]
[ 9.648972] yenta_cardbus 0000:01:0a.1: ISA IRQ mask 0x0438, PCI irq 11
[ 9.648976] yenta_cardbus 0000:01:0a.1: Socket status: 30000006
[ 9.648981] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #03 to #06
[ 9.648990] yenta_cardbus 0000:01:0a.1: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 9.648995] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x2000-0x2fff: clean.
[ 9.649310] yenta_cardbus 0000:01:0a.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[ 9.649315] yenta_cardbus 0000:01:0a.1: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
[ 9.764686] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 9.766307] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x407
[ 9.766985] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 9.767577] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 9.768385] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 10.185284] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 10.186904] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x407
[ 10.187582] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 10.188413] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 10.189191] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 10.340045] intel8x0_measure_ac97_clock: measured 55284 usecs (2664 samples)
[ 10.340050] intel8x0: clocking to 48000
[ 11.391412] EXT3 FS on dm-0, internal journal
[ 11.722613] loop: module loaded
[ 13.034848] Adding 1454072k swap on /dev/mapper/swe248_deb-swap_1. Priority:-1 extents:1 across:1454072k
[ 14.873922] kjournald starting. Commit interval 5 seconds
[ 14.874296] EXT3 FS on dm-5, internal journal
[ 14.874303] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.927376] kjournald starting. Commit interval 5 seconds
[ 14.927721] EXT3 FS on dm-4, internal journal
[ 14.927728] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.988190] kjournald starting. Commit interval 5 seconds
[ 14.988557] EXT3 FS on dm-1, internal journal
[ 14.988561] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.052177] kjournald starting. Commit interval 5 seconds
[ 15.052558] EXT3 FS on dm-2, internal journal
[ 15.052562] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.259274] RPC: Registered udp transport module.
[ 19.259280] RPC: Registered tcp transport module.
[ 19.259283] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.917023] Slow work thread pool: Starting up
[ 19.917089] Slow work thread pool: Ready
[ 19.917194] FS-Cache: Loaded
[ 19.932747] eth0: link down
[ 19.933064] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.378895] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.433201] FS-Cache: Netfs 'nfs' registered for caching
[ 20.512815] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 22.409725] microcode: CPU0 sig=0x695, pf=0x20, revision=0x5
[ 22.409732] platform microcode: firmware: requesting intel-ucode/06-09-05
[ 22.557040] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 22.998486] microcode: CPU0 updated to revision 0x7, date = 2004-11-09
[ 23.960589] wlan0: direct probe to AP 00:11:22:33:44:55 (try 1)
[ 23.963315] wlan0: direct probe responded
[ 23.963320] wlan0: authenticate with AP 00:11:22:33:44:55 (try 1)
[ 23.965461] wlan0: authenticated
[ 23.965477] wlan0: associate with AP 00:11:22:33:44:55 (try 1)
[ 23.968659] wlan0: RX AssocResp from 00:11:22:33:44:55 (capab=0x411 status=0 aid=2)
[ 23.968664] wlan0: associated
[ 23.969528] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 23.969780] cfg80211: Calling CRDA for country: SE
[ 24.413886] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[ 30.728991] apm: BIOS not found.
[ 31.910415] Bluetooth: Core ver 2.15
[ 31.910505] NET: Registered protocol family 31
[ 31.910508] Bluetooth: HCI device and connection manager initialized
[ 31.910512] Bluetooth: HCI socket layer initialized
[ 31.976805] Bluetooth: L2CAP ver 2.14
[ 31.976810] Bluetooth: L2CAP socket layer initialized
[ 32.068926] Bluetooth: RFCOMM TTY layer initialized
[ 32.068933] Bluetooth: RFCOMM socket layer initialized
[ 32.068936] Bluetooth: RFCOMM ver 1.11
[ 32.125241] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 32.125246] Bluetooth: BNEP filters: protocol multicast
[ 32.244959] Bridge firewalling registered
[ 32.334638] Bluetooth: SCO (Voice Link) ver 0.6
[ 32.334643] Bluetooth: SCO socket layer initialized
[ 33.750660] lp0: using parport0 (interrupt-driven).
[ 33.788414] ppdev: user-space parallel port driver
[ 55.190942] psmouse.c: Mouse at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away.
** Model information
not available
** Loaded modules:
Module Size Used by
acpi_cpufreq 4951 0
cpufreq_powersave 602 0
cpufreq_stats 1940 0
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
ppdev 4058 0
lp 5570 0
sco 5857 2
bridge 33019 0
stp 996 1 bridge
bnep 7444 2
rfcomm 25175 0
l2cap 21709 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36319 6 sco,bnep,rfcomm,l2cap
aes_i586 6816 2
aes_generic 25738 1 aes_i586
uinput 4796 1
microcode 8474 0
rpcsec_gss_krb5 7477 0
nfsd 193887 2
exportfs 2618 1 nfsd
nfs 207074 0
lockd 49437 2 nfsd,nfs
fscache 24662 1 nfs
nfs_acl 1695 2 nfsd,nfs
auth_rpcgss 25268 3 rpcsec_gss_krb5,nfsd,nfs
sunrpc 134784 7 rpcsec_gss_krb5,nfsd,nfs,lockd,nfs_acl,auth_rpcgss
ext2 46245 1
firewire_sbp2 9647 0
loop 9765 0
pcmcia 16194 0
snd_intel8x0 19595 0
snd_ac97_codec 79148 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
arc4 974 2
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
ecb 1405 2
snd_pcm 47226 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12513 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
yenta_socket 16403 2
ath5k 104074 0
i915 223024 2
mac80211 123570 1 ath5k
ath 6014 1 ath5k
rsrc_nonstatic 7057 1 yenta_socket
cfg80211 87657 3 ath5k,mac80211,ath
pcmcia_core 20450 3 pcmcia,yenta_socket,rsrc_nonstatic
rfkill 10264 3 bluetooth,cfg80211
drm_kms_helper 18309 1 i915
apanel 1990 0
snd 34375 9 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
drm 112088 3 i915,drm_kms_helper
input_polldev 1479 1 apanel
i2c_algo_bit 3497 1 i915
shpchp 21220 0
soundcore 3450 1 snd
i2c_i801 6462 0
parport_pc 15799 1
i2c_core 12787 6 i915,drm_kms_helper,apanel,drm,i2c_algo_bit,i2c_i801
pci_hotplug 18065 1 shpchp
fujitsu_laptop 8399 0
parport 22554 3 ppdev,lp,parport_pc
snd_page_alloc 5045 2 snd_intel8x0,snd_pcm
irda 75956 0
video 14605 1 i915
evdev 5609 16
pcspkr 1207 0
crc_ccitt 1039 1 irda
battery 3782 0
processor 26327 2 acpi_cpufreq
button 3598 1 i915
ac 1640 0
led_class 1757 3 ath5k,apanel,fujitsu_laptop
psmouse 44809 0
output 1204 1 video
serio_raw 2916 0
ext3 94204 5
jbd 32169 1 ext3
mbcache 3762 2 ext2,ext3
dm_mod 46046 18
sg 15968 0
sr_mod 10770 0
sd_mod 26005 3
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
ata_generic 2067 0
uhci_hcd 16057 0
ata_piix 17736 2
firewire_ohci 16725 0
libata 115753 2 ata_generic,ata_piix
8139too 14949 0
thermal 9206 0
ehci_hcd 28681 0
usbcore 98733 3 uhci_hcd,ehci_hcd
firewire_core 31243 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
mii 2714 1 8139too
scsi_mod 101429 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
thermal_sys 9378 3 video,processor,thermal
nls_base 4541 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02)
Subsystem: Fujitsu Limited. Device [10cf:11d5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
Subsystem: Fujitsu Limited. Device [10cf:11d5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
Subsystem: Fujitsu Limited. Device [10cf:11d5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Limited. Device [10cf:120e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
Subsystem: Fujitsu Limited. Device [10cf:120e]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Device [10cf:11ab]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Device [10cf:11ab]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Device [10cf:11ab]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Limited. Device [10cf:11ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=06, sec-latency=168
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0200000-d02fffff
Prefetchable memory behind bridge: 30000000-37ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Limited. Device [10cf:11ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 38000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03)
Subsystem: Fujitsu Limited. Device [10cf:11ab]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
Subsystem: Fujitsu Limited. Device [10cf:11c3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:0a.0 CardBus bridge [0607]: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller [1217:6933] (rev 02)
Subsystem: Fujitsu Limited. Device [10cf:10e6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0215000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=02, sec-latency=176
Memory window 0: 30000000-33fff000 (prefetchable)
Memory window 1: 3c000000-3ffff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
01:0a.1 CardBus bridge [0607]: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller [1217:6933] (rev 02)
Subsystem: Fujitsu Limited. Device [10cf:10e6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d0216000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 34000000-37fff000 (prefetchable)
Memory window 1: 40000000-43fff000
I/O window 0: 00002c00-00002cff
I/O window 1: 00001000-000010ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
01:0c.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Fujitsu Limited. Device [10cf:11bd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at d0214000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
01:0d.0 Ethernet controller [0200]: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter [168c:0013] (rev 01)
Subsystem: Atheros Communications Inc. D-Link AirPlus DWL-G520 Wireless PCI Adapter (rev. A) [168c:2027]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
01:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI])
Subsystem: Fujitsu Limited. Device [10cf:1162]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0214800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0210000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.1
APT prefers squeeze-updates
APT policy: (500, 'squeeze-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-31 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-31 Binary firmware for various driver
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
ii firmware-ipw2x00 0.28 Binary firmware for Intel Pro Wire
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Reply to: