Bug#618422: linux-image-2.6.32-5-amd64: HP DM1-2160la with ALPS toucpad wasn't detect very well
Package: linux-2.6
Version: 2.6.32-30
Severity: normal
I don't have vertical or horizontal scroll but i have tapping, If iload
synaptics module from xorg.conf i have the same behavior
I have this output fron cat cat /proc/bus/input/devices,
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input8
U: Uniq=
H: Handlers=mouse1 event8
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=2e6b8b3b-d432-4cc2-ad33-dff93f73fadf ro quiet usbcore.autosuspend=1
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 5.277129] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 5.488129] [drm] radeon kernel modesetting enabled.
[ 5.488293] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.488300] radeon 0000:01:05.0: setting latency timer to 64
[ 5.491280] [drm] radeon: Initializing kernel modesetting.
[ 5.491394] [drm] register mmio base: 0x92200000
[ 5.491397] [drm] register mmio size: 65536
[ 5.498869] ATOM BIOS: HP_Garnett10
[ 5.498892] [drm] Clocks initialized !
[ 5.499357] [drm] Detected VRAM RAM=256M, BAR=256M
[ 5.499362] [drm] RAM width 32bits DDR
[ 5.499471] [TTM] Zone kernel: Available graphics memory: 898124 kiB.
[ 5.499497] [drm] radeon: 256M of VRAM memory ready
[ 5.499500] [drm] radeon: 512M of GTT memory ready.
[ 5.499547] [drm] radeon: irq initialized.
[ 5.499551] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.500464] [drm] Loading RS780 Microcode
[ 5.500469] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
[ 5.501635] Bluetooth: Core ver 2.15
[ 5.501724] NET: Registered protocol family 31
[ 5.501728] Bluetooth: HCI device and connection manager initialized
[ 5.501732] Bluetooth: HCI socket layer initialized
[ 5.502696] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 5.512724] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 5.512862] input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 5.529945] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.530220] usbcore: registered new interface driver btusb
[ 5.538347] platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
[ 5.543683] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[ 5.593423] [drm] ring test succeeded in 0 usecs
[ 5.593563] [drm] radeon: ib pool ready.
[ 5.593649] [drm] ib test succeeded in 0 usecs
[ 5.593653] [drm] Enabling audio support
[ 5.593897] [drm] Radeon Display Connectors
[ 5.593900] [drm] Connector 0:
[ 5.593903] [drm] VGA
[ 5.593907] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 5.593910] [drm] Encoders:
[ 5.593912] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.593915] [drm] Connector 1:
[ 5.593917] [drm] LVDS
[ 5.593920] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 5.593923] [drm] Encoders:
[ 5.593925] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 5.593928] [drm] Connector 2:
[ 5.593930] [drm] HDMI-A
[ 5.593931] [drm] HPD1
[ 5.593935] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 5.593937] [drm] Encoders:
[ 5.593940] [drm] DFP1: INTERNAL_UNIPHY
[ 5.740385] [drm] fb mappable at 0x80141000
[ 5.740389] [drm] vram apper at 0x80000000
[ 5.740391] [drm] size 4325376
[ 5.740393] [drm] fb depth is 24
[ 5.740396] [drm] pitch is 5632
[ 6.748147] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting
[ 6.748155] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E926 (len 498, WS 0, PS 4) @ 0xE967
[ 7.131699] Console: switching to colour frame buffer device 170x48
[ 7.147646] fb0: radeondrmfb frame buffer device
[ 7.147649] registered panic notifier
[ 7.147675] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 7.148171] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.148273] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 7.962558] Adding 4393976k swap on /dev/sda7. Priority:-1 extents:1 across:4393976k
[ 8.386683] loop: module loaded
[ 8.419982] powernow-k8: Found 1 AMD Athlon(tm) II Neo K325 Dual-Core Processor processors (2 cpu cores) (version 2.20.00)
[ 8.420068] powernow-k8: 0 : pstate 0 (1300 MHz)
[ 8.420072] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 8.420075] powernow-k8: 2 : pstate 2 (800 MHz)
[ 9.058890] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 9.073312] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 11.500738] r8169: eth0: link down
[ 11.501524] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.590128] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.016541] CPU0 attaching NULL sched-domain.
[ 20.016555] CPU1 attaching NULL sched-domain.
[ 20.044292] CPU0 attaching sched-domain:
[ 20.044302] domain 0: span 0-1 level MC
[ 20.044309] groups: 0 1
[ 20.044324] CPU1 attaching sched-domain:
[ 20.044329] domain 0: span 0-1 level MC
[ 20.044334] groups: 1 0
[ 22.808111] wlan0: direct probe to AP 00:16:b6:6b:c3:db (try 1)
[ 22.811722] wlan0: direct probe responded
[ 22.811731] wlan0: authenticate with AP 00:16:b6:6b:c3:db (try 1)
[ 22.813671] wlan0: authenticated
[ 22.813723] wlan0: associate with AP 00:16:b6:6b:c3:db (try 1)
[ 22.836937] wlan0: RX AssocResp from 00:16:b6:6b:c3:db (capab=0x411 status=0 aid=10)
[ 22.836943] wlan0: associated
[ 22.837841] Associated: True
[ 22.838392] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.925328] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 161/256 dur 1794/1504
[ 22.967194] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 137/256 dur 1602/1504
[ 23.042848] padlock: VIA PadLock not detected.
[ 23.056487] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 153/256 dur 1730/1504
[ 26.145928] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 382/256 dur 3562/1504
[ 26.159774] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 382/256 dur 3562/1504
[ 31.244763] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 130/256 dur 1546/1504
[ 33.024187] wlan0: no IPv6 routers present
[ 493.688549] wlc_recv: is_amsdu causing toss
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Pavilion dm1 Notebook PC
product_version: 0598110000243200110300100
chassis_vendor: Hewlett-Packard
chassis_version: N/A
bios_vendor: Hewlett-Packard
bios_version: F.15
board_vendor: Hewlett-Packard
board_name: 148B
board_version: 80.14
** Loaded modules:
Module Size Used by
aes_x86_64 7340 1
aes_generic 25714 1 aes_x86_64
cpufreq_conservative 5162 2
cpufreq_userspace 1992 0
powernow_k8 10978 0
loop 11799 0
snd_hda_codec_atihdmi 2251 1
btusb 9881 0
bluetooth 41827 1 btusb
snd_hda_codec_idt 42481 1
radeon 573996 2
ttm 39986 1 radeon
drm_kms_helper 20065 1 radeon
drm 142359 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 4225 1 radeon
arc4 1274 2
ecb 1841 2
uvcvideo 52063 0
videodev 29993 1 uvcvideo
v4l1_compat 11442 2 uvcvideo,videodev
v4l2_compat_ioctl32 8474 1 videodev
i2c_core 15712 5 radeon,drm_kms_helper,drm,i2c_algo_bit,videodev
snd_hda_intel 20019 1
snd_hda_codec 54244 3 snd_hda_codec_atihdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 5380 1 snd_hda_codec
joydev 8459 0
snd_pcm 60503 2 snd_hda_intel,snd_hda_codec
snd_seq 42881 0
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 1 snd_seq
shpchp 26264 0
edac_core 29261 0
ohci_hcd 19212 0
snd 46446 10 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
edac_mce_amd 6433 0
soundcore 4598 1 snd
hp_accel 11056 0
pci_hotplug 21203 1 shpchp
ehci_hcd 31151 0
brcm80211 622707 0
usbcore 122034 5 btusb,uvcvideo,ohci_hcd,ehci_hcd
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
lis3lv02d 5173 1 hp_accel
psmouse 49777 0
mac80211 137340 1 brcm80211
input_polldev 1967 1 lis3lv02d
nls_base 6377 1 usbcore
video 17445 0
r8169 29229 0
mii 3210 1 r8169
cfg80211 101496 2 brcm80211,mac80211
rfkill 13044 3 bluetooth,cfg80211
wmi 4323 0
output 1692 1 video
led_class 2433 1 hp_accel
evdev 7352 15
serio_raw 3752 0
battery 4998 0
ac 2192 0
button 4650 0
processor 29935 1 powernow_k8
ext4 289033 3
mbcache 5050 1 ext4
jbd2 67015 1 ext4
crc16 1319 1 ext4
sd_mod 29889 5
crc_t10dif 1276 1 sd_mod
ahci 32374 4
libata 133632 1 ahci
thermal 11674 0
thermal_sys 11942 3 video,processor,thermal
scsi_mod 122149 2 sd_mod,libata
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 78:ac:c0:47:f3:57 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether e0:2a:82:44:76:54 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.101/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::e22a:82ff:fe44:7654/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 263887 201 0 0 0 0 0 0 15270 156 0 0 0 0 0 0
*** Protocol statistics:
Ip:
195 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
193 incoming packets delivered
142 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
4 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
185 segments received
133 segments send out
1 segments retransmited
0 bad segments received.
3 resets sent
Udp:
8 packets received
0 packets to unknown port received.
0 packet receive errors
8 packets sent
UdpLite:
TcpExt:
4 TCP sockets finished time wait in fast timer
7 delayed acks sent
167 packet headers predicted
5 acknowledgments not containing data payload received
1 congestion windows recovered without slow start after partial ack
1 other TCP timeouts
IpExt:
InOctets: 260513
OutOctets: 8450
*** Device features:
eth0: 0x180
lo: 0x13865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601]
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: 92100000-922fffff
Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 7038 [size=8]
Region 1: I/O ports at 704c [size=4]
Region 2: I/O ports at 7030 [size=8]
Region 3: I/O ports at 7048 [size=4]
Region 4: I/O ports at 7010 [size=16]
Region 5: Memory at 92308000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 92307000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at 92308600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 92306000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at 92308500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at 92300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 92305000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00002000-00005fff
Memory behind bridge: 91100000-920fffff
Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.1 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a1] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: 91000000-910fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 92304000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at 92308400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc M880G [Mobility Radeon HD 4200] [1002:9712] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 6000 [size=256]
Region 2: Memory at 92200000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at 92100000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] [1002:970f]
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at 92210000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at 90010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at 90000000 (64-bit, prefetchable) [size=64K]
Expansion ROM at 90020000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
09:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1483]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 91000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcm80211
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0a5c:21b4 Broadcom Corp.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 064e:f100 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_SV.utf8, LC_CTYPE=es_SV.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=120013
B: KEY=20000 20 0 0 500f02100003 3803078f900d401 feffffdfffefffff ffffffffffffffff
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
U: Uniq=
H: Handlers=event4
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="ST LIS3LV02DL Accelerometer"
P: Phys=lis3lv02d/input0
S: Sysfs=/devices/platform/lis3lv02d/input/input7
U: Uniq=
H: Handlers=event7 js0
B: EV=9
B: ABS=7
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input8
U: Uniq=
H: Handlers=mouse1 event8
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0003 Vendor=064e Product=f100 Version=0200
N: Name="HP Webcam-50"
P: Phys=usb-0000:00:12.2-4/button
S: Sysfs=/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input9
U: Uniq=
H: Handlers=kbd event9
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0001 Vendor=111d Product=7605 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:14.2/input/input10
U: Uniq=
H: Handlers=kbd event10
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA ATI SB Mic at Ext Front Jack"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input11
U: Uniq=
H: Handlers=event11
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA ATI SB HP Out at Ext Front Jack"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input12
U: Uniq=
H: Handlers=event12
B: EV=21
B: SW=4
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=2e6b8b3b-d432-4cc2-ad33-dff93f73fadf ro quiet usbcore.autosuspend=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006e446000 (usable)
[ 0.000000] BIOS-e820: 000000006e446000 - 000000006e646000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006e646000 - 000000006fd3f000 (usable)
[ 0.000000] BIOS-e820: 000000006fd3f000 - 000000006fdbf000 (reserved)
[ 0.000000] BIOS-e820: 000000006fdbf000 - 000000006febf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006febf000 - 000000006fef6000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006fef6000 - 000000006ff00000 (usable)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000f9000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x6ff00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
[ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 000060000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000006ff00000
[ 0.000000] 0000000000 - 0040000000 page 1G
[ 0.000000] 0040000000 - 006fe00000 page 2M
[ 0.000000] 006fe00000 - 006ff00000 page 4k
[ 0.000000] kernel direct mapping tables up to 6ff00000 @ 8000-b000
[ 0.000000] RAMDISK: 37d50000 - 37fef005
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 000000006fef5120 0005C (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 000000006fef4000 000F4 (v04 HP 148B 00000003 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000006fee3000 0D2F0 (v01 HP 148B F0000000 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000006fe9c000 00040
[ 0.000000] ACPI: HPET 000000006fef3000 00038 (v01 HP 148B 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000006fef2000 00084 (v02 HP 148B 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000006fef1000 0003C (v01 HP 148B 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 000000006fee2000 00028 (v01 HP 148B 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000006fee1000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000006fee0000 00386 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000006ff00000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000006ff00000
[ 0.000000] NODE_DATA [000000000000a000 - 0000000000011fff]
[ 0.000000] bootmap [0000000000012000 - 000000000001ffdf] pages e
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 006ff00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a414] TEXT DATA BSS ==> [0001000000 - 000168a414]
[ 0.000000] #3 [0037d50000 - 0037fef005] RAMDISK ==> [0037d50000 - 0037fef005]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b26d] BRK ==> [000168b000 - 000168b26d]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880001c00000-ffff8800035fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0006e446
[ 0.000000] 0: 0x0006e646 -> 0x0006fd3f
[ 0.000000] 0: 0x0006fef6 -> 0x0006ff00
[ 0.000000] On node 0 totalpages: 457448
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3842 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6213 pages used for memmap
[ 0.000000] DMA32 zone: 447236 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000006e446000 - 000000006e646000
[ 0.000000] PM: Registered nosave memory: 000000006fd3f000 - 000000006fdbf000
[ 0.000000] PM: Registered nosave memory: 000000006fdbf000 - 000000006febf000
[ 0.000000] PM: Registered nosave memory: 000000006febf000 - 000000006fef6000
[ 0.000000] Allocating PCI resources starting at 6ff00000 (gap: 6ff00000:88100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 451078
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=2e6b8b3b-d432-4cc2-ad33-dff93f73fadf ro quiet usbcore.autosuspend=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 7de000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1792968k/1833984k available (3079k kernel code, 4192k absent, 36824k reserved, 1892k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1296.759 MHz processor.
[ 0.008008] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.51 BogoMIPS (lpj=5187028)
[ 0.008038] Security Framework initialized
[ 0.008045] SELinux: Disabled at boot.
[ 0.008295] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009423] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.009944] Mount-cache hash table entries: 256
[ 0.010128] Initializing cgroup subsys ns
[ 0.010133] Initializing cgroup subsys cpuacct
[ 0.010138] Initializing cgroup subsys devices
[ 0.010142] Initializing cgroup subsys freezer
[ 0.010145] Initializing cgroup subsys net_cls
[ 0.010175] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.010179] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.010182] CPU 0/0x0 -> Node 0
[ 0.010187] tseg: 006ff00000
[ 0.010190] CPU: Physical Processor ID: 0
[ 0.010192] CPU: Processor Core ID: 0
[ 0.010196] mce: CPU supports 6 MCE banks
[ 0.010209] using C1E aware idle routine
[ 0.010212] Performance Events: AMD PMU driver.
[ 0.010219] ... version: 0
[ 0.010221] ... bit width: 48
[ 0.010224] ... generic registers: 4
[ 0.010226] ... value mask: 0000ffffffffffff
[ 0.010229] ... max period: 00007fffffffffff
[ 0.010232] ... fixed-purpose events: 0
[ 0.010235] ... event mask: 000000000000000f
[ 0.011386] ACPI: Core revision 20090903
[ 0.032094] Setting APIC routing to flat
[ 0.032445] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.075015] CPU0: AMD Athlon(tm) II Neo K325 Dual-Core Processor stepping 03
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.012000] CPU 1/0x1 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.160054] CPU1: AMD Athlon(tm) II Neo K325 Dual-Core Processor stepping 03
[ 0.160064] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164019] Brought up 2 CPUs
[ 0.164023] Total of 2 processors activated (5187.05 BogoMIPS).
[ 0.164027] System has AMD C1E enabled
[ 0.164050] Switch to broadcast mode on CPU1
[ 0.164361] CPU0 attaching sched-domain:
[ 0.164366] domain 0: span 0-1 level MC
[ 0.164370] groups: 0 1
[ 0.164378] CPU1 attaching sched-domain:
[ 0.164381] domain 0: span 0-1 level MC
[ 0.164384] groups: 1 0
[ 0.164476] Switch to broadcast mode on CPU0
[ 0.164476] devtmpfs: initialized
[ 0.169150] regulator: core version 0.5
[ 0.169150] NET: Registered protocol family 16
[ 0.169150] node 0 link 0: io port [0, ffffff]
[ 0.169150] TOM: 0000000080000000 aka 2048M
[ 0.169150] Fam 10h mmconf [f8000000, fbffffff]
[ 0.169150] node 0 link 0: mmio [a0000, bffff]
[ 0.169150] node 0 link 0: mmio [80000000, 8fffffff]
[ 0.169150] node 0 link 0: mmio [90000000, 920fffff]
[ 0.169150] node 0 link 0: mmio [92100000, 922fffff]
[ 0.169150] node 0 link 0: mmio [92300000, f7ffffff]
[ 0.169150] node 0 link 0: mmio [f8000000, fbffffff] ==> none
[ 0.169150] node 0 link 0: mmio [fc000000, ffdfffff]
[ 0.169150] bus: [00,1f] on node 0 link 0
[ 0.169150] bus: 00 index 0 io port: [0, ffff]
[ 0.169150] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.169150] bus: 00 index 2 mmio: [80000000, f7ffffff]
[ 0.169150] bus: 00 index 3 mmio: [fc000000, fcffffffff]
[ 0.169150] ACPI: bus type pci registered
[ 0.169150] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.169150] PCI: MCFG area at f8000000 reserved in E820
[ 0.169150] PCI: updated MCFG configuration 0: base f8000000 segment 0 buses 0 - 15
[ 0.169178] PCI: Using MMCONFIG at f8000000 - f8ffffff
[ 0.169180] PCI: Using configuration type 1 for base access
[ 0.169248] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.169250] mtrr: probably your BIOS does not setup all CPUs.
[ 0.169252] mtrr: corrected configuration.
[ 0.169590] bio: create slab <bio-0> at 0
[ 0.173274] ACPI: EC: Look up EC in DSDT
[ 0.175058] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.181064] ACPI: BIOS _OSI(Linux) query ignored
[ 0.196232] ACPI: Interpreter enabled
[ 0.196232] ACPI: (supports S0 S3 S4 S5)
[ 0.196232] ACPI: Using IOAPIC for interrupt routing
[ 0.208835] ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
[ 0.208846] ACPI: No dock devices found.
[ 0.210275] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.210492] pci 0000:00:11.0: reg 10 io port: [0x7038-0x703f]
[ 0.210501] pci 0000:00:11.0: reg 14 io port: [0x704c-0x704f]
[ 0.210510] pci 0000:00:11.0: reg 18 io port: [0x7030-0x7037]
[ 0.210518] pci 0000:00:11.0: reg 1c io port: [0x7048-0x704b]
[ 0.210527] pci 0000:00:11.0: reg 20 io port: [0x7010-0x701f]
[ 0.210536] pci 0000:00:11.0: reg 24 32bit mmio: [0x92308000-0x923083ff]
[ 0.210608] pci 0000:00:12.0: reg 10 32bit mmio: [0x92307000-0x92307fff]
[ 0.210690] pci 0000:00:12.2: reg 10 32bit mmio: [0x92308600-0x923086ff]
[ 0.210746] pci 0000:00:12.2: supports D1 D2
[ 0.210750] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.210755] pci 0000:00:12.2: PME# disabled
[ 0.210794] pci 0000:00:13.0: reg 10 32bit mmio: [0x92306000-0x92306fff]
[ 0.210875] pci 0000:00:13.2: reg 10 32bit mmio: [0x92308500-0x923085ff]
[ 0.210932] pci 0000:00:13.2: supports D1 D2
[ 0.210935] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.210940] pci 0000:00:13.2: PME# disabled
[ 0.211050] pci 0000:00:14.2: reg 10 64bit mmio: [0x92300000-0x92303fff]
[ 0.211097] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.211102] pci 0000:00:14.2: PME# disabled
[ 0.211220] pci 0000:00:14.5: reg 10 32bit mmio: [0x92305000-0x92305fff]
[ 0.211332] pci 0000:00:15.0: supports D1 D2
[ 0.211417] pci 0000:00:15.1: supports D1 D2
[ 0.211461] pci 0000:00:16.0: reg 10 32bit mmio: [0x92304000-0x92304fff]
[ 0.211542] pci 0000:00:16.2: reg 10 32bit mmio: [0x92308400-0x923084ff]
[ 0.211598] pci 0000:00:16.2: supports D1 D2
[ 0.211601] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.211607] pci 0000:00:16.2: PME# disabled
[ 0.211801] pci 0000:01:05.0: reg 10 32bit mmio pref: [0x80000000-0x8fffffff]
[ 0.211807] pci 0000:01:05.0: reg 14 io port: [0x6000-0x60ff]
[ 0.211814] pci 0000:01:05.0: reg 18 32bit mmio: [0x92200000-0x9220ffff]
[ 0.211824] pci 0000:01:05.0: reg 24 32bit mmio: [0x92100000-0x921fffff]
[ 0.211842] pci 0000:01:05.0: supports D1 D2
[ 0.211869] pci 0000:01:05.1: reg 10 32bit mmio: [0x92210000-0x92213fff]
[ 0.211898] pci 0000:01:05.1: supports D1 D2
[ 0.211949] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
[ 0.211953] pci 0000:00:01.0: bridge 32bit mmio: [0x92100000-0x922fffff]
[ 0.212011] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x8fffffff]
[ 0.212075] pci 0000:00:14.4: transparent bridge
[ 0.212144] pci 0000:03:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.212173] pci 0000:03:00.0: reg 18 64bit mmio pref: [0x90010000-0x90010fff]
[ 0.212195] pci 0000:03:00.0: reg 20 64bit mmio pref: [0x90000000-0x9000ffff]
[ 0.212231] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff]
[ 0.212283] pci 0000:03:00.0: supports D1 D2
[ 0.212286] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.212297] pci 0000:03:00.0: PME# disabled
[ 0.260207] pci 0000:00:15.0: bridge io port: [0x2000-0x5fff]
[ 0.260215] pci 0000:00:15.0: bridge 32bit mmio: [0x91100000-0x920fffff]
[ 0.260224] pci 0000:00:15.0: bridge 64bit mmio pref: [0x90000000-0x90ffffff]
[ 0.260310] pci 0000:09:00.0: reg 10 64bit mmio: [0x91000000-0x91003fff]
[ 0.260401] pci 0000:09:00.0: supports D1 D2
[ 0.272163] pci 0000:00:15.1: bridge 32bit mmio: [0x91000000-0x910fffff]
[ 0.272217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.272651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.272818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
[ 0.272970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
[ 0.273192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.294868] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.295219] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.295545] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.295928] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.296276] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.296530] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.296819] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.297082] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.297301] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.297307] vgaarb: loaded
[ 0.300095] PCI: Using ACPI for IRQ routing
[ 0.300458] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.300465] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.302512] Switching to clocksource tsc
[ 0.305337] pnp: PnP ACPI init
[ 0.305354] ACPI: bus type pnp registered
[ 0.309236] alloc irq_desc for 22 on node 0
[ 0.309239] alloc kstat_irqs on node 0
[ 0.310613] pnp: PnP ACPI: found 12 devices
[ 0.310618] ACPI: ACPI bus type pnp unregistered
[ 0.310646] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.310651] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.310656] system 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved
[ 0.310661] system 00:01: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.310665] system 00:01: iomem range 0xfed80000-0xfed80fff has been reserved
[ 0.310670] system 00:01: iomem range 0xf8900000-0xf8900fff has been reserved
[ 0.310684] system 00:09: ioport range 0x400-0x4cf has been reserved
[ 0.310689] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.310692] system 00:09: ioport range 0x4d6-0x4d6 has been reserved
[ 0.310696] system 00:09: ioport range 0x550-0x550 has been reserved
[ 0.310709] system 00:09: ioport range 0x680-0x6ff has been reserved
[ 0.310713] system 00:09: ioport range 0x77a-0x77a has been reserved
[ 0.310717] system 00:09: ioport range 0xc00-0xc01 has been reserved
[ 0.310721] system 00:09: ioport range 0xc14-0xc14 has been reserved
[ 0.310725] system 00:09: ioport range 0xc50-0xc52 has been reserved
[ 0.310729] system 00:09: ioport range 0xc6c-0xc6c has been reserved
[ 0.310733] system 00:09: ioport range 0xc6f-0xc6f has been reserved
[ 0.310737] system 00:09: ioport range 0xcd0-0xcdb has been reserved
[ 0.310740] system 00:09: ioport range 0x380-0x387 has been reserved
[ 0.310750] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 0.310754] system 00:0a: iomem range 0xffe00000-0xffffffff has been reserved
[ 0.315925] pci 0000:03:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
[ 0.316012] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.316016] pci 0000:00:01.0: IO window: 0x6000-0x6fff
[ 0.316021] pci 0000:00:01.0: MEM window: 0x92100000-0x922fffff
[ 0.316026] pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x0000008fffffff
[ 0.316032] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[ 0.316035] pci 0000:00:14.4: IO window: disabled
[ 0.316041] pci 0000:00:14.4: MEM window: disabled
[ 0.316046] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.316057] pci 0000:00:15.0: PCI bridge, secondary bus 0000:03
[ 0.316061] pci 0000:00:15.0: IO window: 0x2000-0x5fff
[ 0.316067] pci 0000:00:15.0: MEM window: 0x91100000-0x920fffff
[ 0.316073] pci 0000:00:15.0: PREFETCH window: 0x00000090000000-0x00000090ffffff
[ 0.316081] pci 0000:00:15.1: PCI bridge, secondary bus 0000:09
[ 0.316083] pci 0000:00:15.1: IO window: disabled
[ 0.316089] pci 0000:00:15.1: MEM window: 0x91000000-0x910fffff
[ 0.316094] pci 0000:00:15.1: PREFETCH window: disabled
[ 0.316109] pci 0000:00:01.0: setting latency timer to 64
[ 0.316128] alloc irq_desc for 16 on node 0
[ 0.316130] alloc kstat_irqs on node 0
[ 0.316140] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.316146] pci 0000:00:15.0: setting latency timer to 64
[ 0.316156] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.316161] pci 0000:00:15.1: setting latency timer to 64
[ 0.316167] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.316171] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.316175] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff]
[ 0.316179] pci_bus 0000:01: resource 1 mem: [0x92100000-0x922fffff]
[ 0.316183] pci_bus 0000:01: resource 2 pref mem [0x80000000-0x8fffffff]
[ 0.316186] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.316190] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.316194] pci_bus 0000:03: resource 0 io: [0x2000-0x5fff]
[ 0.316197] pci_bus 0000:03: resource 1 mem: [0x91100000-0x920fffff]
[ 0.316201] pci_bus 0000:03: resource 2 pref mem [0x90000000-0x90ffffff]
[ 0.316205] pci_bus 0000:09: resource 1 mem: [0x91000000-0x910fffff]
[ 0.316254] NET: Registered protocol family 2
[ 0.316431] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.317381] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.319681] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.320275] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.320279] TCP reno registered
[ 0.320423] NET: Registered protocol family 1
[ 0.528033] pci 0000:01:05.0: Boot video device
[ 0.528121] Unpacking initramfs...
[ 0.610448] Freeing initrd memory: 2684k freed
[ 0.613053] Simple Boot Flag at 0x44 set to 0x1
[ 0.613527] audit: initializing netlink socket (disabled)
[ 0.613543] type=2000 audit(1300128024.611:1): initialized
[ 0.618659] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.620776] VFS: Disk quotas dquot_6.5.2
[ 0.620866] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.620977] msgmni has been set to 3507
[ 0.621368] alg: No test for stdrng (krng)
[ 0.621501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.621507] io scheduler noop registered
[ 0.621510] io scheduler anticipatory registered
[ 0.621513] io scheduler deadline registered
[ 0.621562] io scheduler cfq registered (default)
[ 0.621899] alloc irq_desc for 24 on node 0
[ 0.621904] alloc kstat_irqs on node 0
[ 0.621922] pcieport 0000:00:15.0: irq 24 for MSI/MSI-X
[ 0.621933] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.622223] alloc irq_desc for 25 on node 0
[ 0.622226] alloc kstat_irqs on node 0
[ 0.622236] pcieport 0000:00:15.1: irq 25 for MSI/MSI-X
[ 0.622246] pcieport 0000:00:15.1: setting latency timer to 64
[ 0.624389] Linux agpgart interface v0.103
[ 0.624453] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.624966] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.625040] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.640887] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.640896] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.641030] mice: PS/2 mouse device common for all mice
[ 0.641094] rtc_cmos 00:05: RTC can wake from S4
[ 0.641137] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.641166] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.641181] cpuidle: using governor ladder
[ 0.641184] cpuidle: using governor menu
[ 0.641190] No iBFT detected.
[ 0.641648] TCP cubic registered
[ 0.641803] NET: Registered protocol family 10
[ 0.642439] lo: Disabled Privacy Extensions
[ 0.642849] Mobile IPv6
[ 0.642853] NET: Registered protocol family 17
[ 0.642945] PM: Resume from disk failed.
[ 0.642959] registered taskstats version 1
[ 0.643559] rtc_cmos 00:05: setting system clock to 2011-03-14 18:40:25 UTC (1300128025)
[ 0.643627] Initalizing network drop monitor service
[ 0.643681] Freeing unused kernel memory: 592k freed
[ 0.643975] Write protecting the kernel read-only data: 4236k
[ 0.661727] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.674551] udev[84]: starting version 164
[ 0.830965] SCSI subsystem initialized
[ 0.835043] ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386)
[ 0.854582] libata version 3.00 loaded.
[ 0.859153] ahci 0000:00:11.0: version 3.0
[ 0.859240] alloc irq_desc for 19 on node 0
[ 0.859243] alloc kstat_irqs on node 0
[ 0.859255] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.859302] alloc irq_desc for 26 on node 0
[ 0.859304] alloc kstat_irqs on node 0
[ 0.859318] ahci 0000:00:11.0: irq 26 for MSI/MSI-X
[ 0.859382] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.859389] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.859643] scsi0 : ahci
[ 0.859799] ata1: SATA max UDMA/133 abar m1024@0x92308000 port 0x92308100 irq 26
[ 1.288161] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.288533] ata1.00: ATA-8: TOSHIBA MK3261GSYN, MH000C, max UDMA/100
[ 1.288540] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.289055] ata1.00: configured for UDMA/100
[ 1.304309] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3261GS MH00 PQ: 0 ANSI: 5
[ 1.312659] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.312729] sd 0:0:0:0: [sda] Write Protect is off
[ 1.312733] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.312763] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.312939] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
[ 1.425182] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.060758] PM: Starting manual resume from disk
[ 2.060764] PM: Resume from partition 8:7
[ 2.060767] PM: Checking hibernation image.
[ 2.061051] PM: Error -22 checking image file
[ 2.061056] PM: Resume from disk failed.
[ 2.141563] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.098263] udev[386]: starting version 164
[ 3.324143] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 3.324154] ACPI: Power Button [PWRB]
[ 3.324242] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 3.324248] ACPI: Sleep Button [SLPB]
[ 3.324355] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 3.324882] ACPI: Lid Switch [LID]
[ 3.326708] ACPI: processor limited to max C-state 1
[ 3.326784] processor LNXCPU:00: registered as cooling_device0
[ 3.326926] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.326936] ACPI: Power Button [PWRF]
[ 3.327389] processor LNXCPU:01: registered as cooling_device1
[ 3.389815] ACPI: AC Adapter [ACAD] (on-line)
[ 3.440339] ACPI: Battery Slot [BAT0] (battery present)
[ 3.449937] ACPI: WMI: Mapper loaded
[ 3.594993] cfg80211: Using static regulatory domain info
[ 3.594997] cfg80211: Regulatory domain: US
[ 3.595000] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.595005] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 3.595009] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.595012] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.595016] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.595019] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.595023] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 3.595037] cfg80211: Calling CRDA for country: US
[ 3.623290] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.623330] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.623385] r8169 0000:03:00.0: setting latency timer to 64
[ 3.623438] alloc irq_desc for 27 on node 0
[ 3.623442] alloc kstat_irqs on node 0
[ 3.623462] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 3.624301] eth0: RTL8102e at 0xffffc9000037e000, 78:ac:c0:47:f3:57, XID 04e00000 IRQ 27
[ 3.709235] acpi device:03: registered as cooling_device2
[ 3.709599] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
[ 3.709664] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.879567] usbcore: registered new interface driver usbfs
[ 3.879607] usbcore: registered new interface driver hub
[ 3.879735] usbcore: registered new device driver usb
[ 4.159045] brcm80211: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.169037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.169198] alloc irq_desc for 17 on node 0
[ 4.169201] alloc kstat_irqs on node 0
[ 4.169214] brcm80211 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.169224] brcm80211 0000:09:00.0: setting latency timer to 64
[ 4.169263] brcm80211 0000:09:00.0: firmware: requesting brcm/bcm43xx-0.fw
[ 4.169364] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.169379] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 4.169384] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 4.169417] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 4.169497] ehci_hcd 0000:00:12.2: debug port 1
[ 4.169528] ehci_hcd 0000:00:12.2: irq 17, io mem 0x92308600
[ 4.174944] lis3lv02d: laptop model unknown, using default axes configuration
[ 4.175969] lis3lv02d: 1-byte sensor found
[ 4.182435] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.184111] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 4.184157] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.184161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.184166] usb usb1: Product: EHCI Host Controller
[ 4.184169] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 4.184172] usb usb1: SerialNumber: 0000:00:12.2
[ 4.184305] usb usb1: configuration #1 chosen from 1 choice
[ 4.184350] hub 1-0:1.0: USB hub found
[ 4.184364] hub 1-0:1.0: 5 ports detected
[ 4.184687] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.184718] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 4.184723] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.184736] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 4.184780] ehci_hcd 0000:00:13.2: debug port 1
[ 4.184800] ehci_hcd 0000:00:13.2: irq 17, io mem 0x92308500
[ 4.191564] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 4.191696] Registered led device: hp::hddprotect
[ 4.191723] lis3lv02d driver loaded.
[ 4.200146] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.200194] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.200198] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.200202] usb usb2: Product: EHCI Host Controller
[ 4.200204] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 4.200207] usb usb2: SerialNumber: 0000:00:13.2
[ 4.200354] usb usb2: configuration #1 chosen from 1 choice
[ 4.200397] hub 2-0:1.0: USB hub found
[ 4.200408] hub 2-0:1.0: 5 ports detected
[ 4.200576] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.200610] ehci_hcd 0000:00:16.2: setting latency timer to 64
[ 4.200615] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 4.200629] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 4.200671] ehci_hcd 0000:00:16.2: debug port 1
[ 4.200690] ehci_hcd 0000:00:16.2: irq 17, io mem 0x92308400
[ 4.216987] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 4.217032] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.217036] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.217039] usb usb3: Product: EHCI Host Controller
[ 4.217042] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 4.217045] usb usb3: SerialNumber: 0000:00:16.2
[ 4.217827] usb usb3: configuration #1 chosen from 1 choice
[ 4.217923] hub 3-0:1.0: USB hub found
[ 4.217935] hub 3-0:1.0: 4 ports detected
[ 4.265133] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.266880] alloc irq_desc for 18 on node 0
[ 4.266885] alloc kstat_irqs on node 0
[ 4.266898] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.266976] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 4.266982] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 4.267016] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 4.267100] ohci_hcd 0000:00:12.0: irq 18, io mem 0x92307000
[ 4.277907] EDAC MC: Ver: 2.1.0 Jan 12 2011
[ 4.322625] EDAC amd64_edac: Ver: 3.2.0 Jan 12 2011
[ 4.328160] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.328166] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.328170] usb usb4: Product: OHCI Host Controller
[ 4.328173] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 4.328176] usb usb4: SerialNumber: 0000:00:12.0
[ 4.328324] usb usb4: configuration #1 chosen from 1 choice
[ 4.328368] hub 4-0:1.0: USB hub found
[ 4.328448] hub 4-0:1.0: 5 ports detected
[ 4.328647] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[ 4.328652] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 4.328802] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 4.328813] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.328815] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.328818] (Note that use of the override may cause unknown side effects.)
[ 4.328832] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 4.328992] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.329026] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 4.329031] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.329044] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 4.329074] ohci_hcd 0000:00:13.0: irq 18, io mem 0x92306000
[ 4.388159] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.388165] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.388169] usb usb5: Product: OHCI Host Controller
[ 4.388172] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 4.388175] usb usb5: SerialNumber: 0000:00:13.0
[ 4.388317] usb usb5: configuration #1 chosen from 1 choice
[ 4.388361] hub 5-0:1.0: USB hub found
[ 4.388443] hub 5-0:1.0: 5 ports detected
[ 4.388664] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.388700] ohci_hcd 0000:00:14.5: setting latency timer to 64
[ 4.388705] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 4.388721] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 4.388751] ohci_hcd 0000:00:14.5: irq 18, io mem 0x92305000
[ 4.452348] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.452353] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.452357] usb usb6: Product: OHCI Host Controller
[ 4.452360] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 4.452363] usb usb6: SerialNumber: 0000:00:14.5
[ 4.452590] usb usb6: configuration #1 chosen from 1 choice
[ 4.452670] hub 6-0:1.0: USB hub found
[ 4.452751] hub 6-0:1.0: 2 ports detected
[ 4.492586] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 4.594401] brcm80211 0000:09:00.0: firmware: requesting brcm/bcm43xx_hdr-0.fw
[ 4.627393] usb 1-4: New USB device found, idVendor=064e, idProduct=f100
[ 4.627400] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.627404] usb 1-4: Product: HP Webcam-50
[ 4.627407] usb 1-4: Manufacturer: SuYin
[ 4.627410] usb 1-4: SerialNumber: HF031A-J310-HN02-VH-R02.00.00
[ 4.627560] usb 1-4: configuration #1 chosen from 1 choice
[ 4.912132] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
[ 5.012967] usb 5-1: new full speed USB device using ohci_hcd and address 2
[ 5.142056] Linux video capture interface: v2.00
[ 5.151211] Found chip type AI (0x13814313)
[ 5.154804] Changing max_res_mask to 0xffff
[ 5.154807] Changing min_res_mask to 0x200d
[ 5.161137] Applying 4313 WARs
[ 5.162149] wlc_bmac_attach:: deviceid 0x4727 nbands 1 board 0x1483 macaddr: e0:2a:82:44:76:54
[ 5.163444] uvcvideo: Found UVC 1.00 device HP Webcam-50 (064e:f100)
[ 5.165141] input: HP Webcam-50 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input9
[ 5.165232] usbcore: registered new interface driver uvcvideo
[ 5.165237] USB Video Class driver (v0.1.0)
[ 5.188247] usb 5-1: New USB device found, idVendor=0a5c, idProduct=21b4
[ 5.188254] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.188258] usb 5-1: Product: Broadcom 2070 Bluetooth
[ 5.188261] usb 5-1: Manufacturer: Broadcom Corp
[ 5.188264] usb 5-1: SerialNumber: E02A824FDAB5
[ 5.188404] usb 5-1: configuration #1 chosen from 1 choice
[ 5.212909] phy0: Selected rate control algorithm 'minstrel'
[ 5.213829] wl_set_hint: Sending country code US to MAC80211
[ 5.213837] wl0: Broadcom BCM43xx 802.11 MAC80211 Driver 5.75.11 (1.82.8.0) (Compiled in . at 03:32:29 on Jan 12 2011)
[ 5.213864] cfg80211: Calling CRDA for country: US
[ 5.213930] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.217196] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.217271] ohci_hcd 0000:00:16.0: setting latency timer to 64
[ 5.217277] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 5.217309] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 5.217383] ohci_hcd 0000:00:16.0: irq 18, io mem 0x92304000
[ 5.260966] [drm] Initialized drm 1.1.0 20060810
[ 5.276164] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.276170] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.276174] usb usb7: Product: OHCI Host Controller
[ 5.276177] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 5.276180] usb usb7: SerialNumber: 0000:00:16.0
[ 5.276341] usb usb7: configuration #1 chosen from 1 choice
[ 5.276386] hub 7-0:1.0: USB hub found
[ 5.276466] hub 7-0:1.0: 4 ports detected
[ 5.276720] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.277129] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 5.488129] [drm] radeon kernel modesetting enabled.
[ 5.488293] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.488300] radeon 0000:01:05.0: setting latency timer to 64
[ 5.491280] [drm] radeon: Initializing kernel modesetting.
[ 5.491394] [drm] register mmio base: 0x92200000
[ 5.491397] [drm] register mmio size: 65536
[ 5.498869] ATOM BIOS: HP_Garnett10
[ 5.498892] [drm] Clocks initialized !
[ 5.499357] [drm] Detected VRAM RAM=256M, BAR=256M
[ 5.499362] [drm] RAM width 32bits DDR
[ 5.499471] [TTM] Zone kernel: Available graphics memory: 898124 kiB.
[ 5.499497] [drm] radeon: 256M of VRAM memory ready
[ 5.499500] [drm] radeon: 512M of GTT memory ready.
[ 5.499547] [drm] radeon: irq initialized.
[ 5.499551] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.500464] [drm] Loading RS780 Microcode
[ 5.500469] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
[ 5.501635] Bluetooth: Core ver 2.15
[ 5.501724] NET: Registered protocol family 31
[ 5.501728] Bluetooth: HCI device and connection manager initialized
[ 5.501732] Bluetooth: HCI socket layer initialized
[ 5.502696] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 5.512724] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 5.512862] input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 5.529945] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.530220] usbcore: registered new interface driver btusb
[ 5.538347] platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
[ 5.543683] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[ 5.593423] [drm] ring test succeeded in 0 usecs
[ 5.593563] [drm] radeon: ib pool ready.
[ 5.593649] [drm] ib test succeeded in 0 usecs
[ 5.593653] [drm] Enabling audio support
[ 5.593897] [drm] Radeon Display Connectors
[ 5.593900] [drm] Connector 0:
[ 5.593903] [drm] VGA
[ 5.593907] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 5.593910] [drm] Encoders:
[ 5.593912] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.593915] [drm] Connector 1:
[ 5.593917] [drm] LVDS
[ 5.593920] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 5.593923] [drm] Encoders:
[ 5.593925] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 5.593928] [drm] Connector 2:
[ 5.593930] [drm] HDMI-A
[ 5.593931] [drm] HPD1
[ 5.593935] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 5.593937] [drm] Encoders:
[ 5.593940] [drm] DFP1: INTERNAL_UNIPHY
[ 5.740385] [drm] fb mappable at 0x80141000
[ 5.740389] [drm] vram apper at 0x80000000
[ 5.740391] [drm] size 4325376
[ 5.740393] [drm] fb depth is 24
[ 5.740396] [drm] pitch is 5632
[ 6.748147] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting
[ 6.748155] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E926 (len 498, WS 0, PS 4) @ 0xE967
[ 7.131699] Console: switching to colour frame buffer device 170x48
[ 7.147646] fb0: radeondrmfb frame buffer device
[ 7.147649] registered panic notifier
[ 7.147675] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 7.148171] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.148273] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 7.962558] Adding 4393976k swap on /dev/sda7. Priority:-1 extents:1 across:4393976k
[ 8.386683] loop: module loaded
[ 8.419982] powernow-k8: Found 1 AMD Athlon(tm) II Neo K325 Dual-Core Processor processors (2 cpu cores) (version 2.20.00)
[ 8.420068] powernow-k8: 0 : pstate 0 (1300 MHz)
[ 8.420072] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 8.420075] powernow-k8: 2 : pstate 2 (800 MHz)
[ 9.058890] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 9.073312] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 11.500738] r8169: eth0: link down
[ 11.501524] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.590128] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.016541] CPU0 attaching NULL sched-domain.
[ 20.016555] CPU1 attaching NULL sched-domain.
[ 20.044292] CPU0 attaching sched-domain:
[ 20.044302] domain 0: span 0-1 level MC
[ 20.044309] groups: 0 1
[ 20.044324] CPU1 attaching sched-domain:
[ 20.044329] domain 0: span 0-1 level MC
[ 20.044334] groups: 1 0
[ 22.808111] wlan0: direct probe to AP 00:16:b6:6b:c3:db (try 1)
[ 22.811722] wlan0: direct probe responded
[ 22.811731] wlan0: authenticate with AP 00:16:b6:6b:c3:db (try 1)
[ 22.813671] wlan0: authenticated
[ 22.813723] wlan0: associate with AP 00:16:b6:6b:c3:db (try 1)
[ 22.836937] wlan0: RX AssocResp from 00:16:b6:6b:c3:db (capab=0x411 status=0 aid=10)
[ 22.836943] wlan0: associated
[ 22.837841] Associated: True
[ 22.838392] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.925328] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 161/256 dur 1794/1504
[ 22.967194] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 137/256 dur 1602/1504
[ 23.042848] padlock: VIA PadLock not detected.
[ 23.056487] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 153/256 dur 1730/1504
[ 26.145928] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 382/256 dur 3562/1504
[ 26.159774] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 382/256 dur 3562/1504
[ 31.244763] wl0: wlc_d11hdrs_mac80211: AC_BE txop exceeded phylen 130/256 dur 1546/1504
[ 33.024187] wlan0: no IPv6 routers present
[ 493.688549] wlc_recv: is_amsdu causing toss
ButtonPress event, serial 30, synthetic NO, window 0x2800001,
root 0xfe, subw 0x0, time 2652456, (150,79), root:(152,514),
state 0x0, button 3, same_screen YES
ButtonRelease event, serial 30, synthetic NO, window 0x2800001,
root 0xfe, subw 0x0, time 2652594, (150,79), root:(152,514),
state 0x400, button 3, same_screen YES
ButtonPress event, serial 30, synthetic NO, window 0x2800001,
root 0xfe, subw 0x0, time 2654074, (150,79), root:(152,514),
state 0x0, button 1, same_screen YES
ButtonRelease event, serial 30, synthetic NO, window 0x2800001,
root 0xfe, subw 0x0, time 2654174, (150,79), root:(152,514),
state 0x100, button 1, same_screen YES
ButtonPress event, serial 30, synthetic NO, window 0x2800001,
root 0xfe, subw 0x0, time 2654432, (150,79), root:(152,514),
state 0x0, button 1, same_screen YES
ButtonRelease event, serial 30, synthetic NO, window 0x2800001,
root 0xfe, subw 0x0, time 2654511, (150,79), root:(152,514),
state 0x100, button 1, same_screen YES
ButtonPress event, serial 30, synthetic NO, window 0x2800001,
root 0xfe, subw 0x0, time 2655186, (150,79), root:(152,514),
state 0x0, button 3, same_screen YES
ButtonRelease event, serial 30, synthetic NO, window 0x2800001,
root 0xfe, subw 0x0, time 2655266, (150,79), root:(152,514),
state 0x400, button 3, same_screen YES
ButtonPress event, serial 30, synthetic NO, window 0x2800001,
root 0xfe, subw 0x0, time 2655396, (150,79), root:(152,514),
state 0x0, button 3, same_screen YES
ButtonRelease event, serial 30, synthetic NO, window 0x2800001,
root 0xfe, subw 0x0, time 2655455, (150,79), root:(152,514),
state 0x400, button 3, same_screen YES
FocusOut event, serial 30, synthetic NO, window 0x2800001,
mode NotifyGrab, detail NotifyAncestor
FocusOut event, serial 30, synthetic NO, window 0x2800001,
mode NotifyWhileGrabbed, detail NotifyNonlinear
FocusOut event, serial 30, synthetic NO, window 0x2800001,
mode NotifyUngrab, detail NotifyPointeSection "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "built-ins"
EndSection
Section "Module"
Load "dbe"
Load "record"
Load "dri2"
Load "glx"
Load "dri"
Load "extmod"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 260 140 # mm
Identifier "Monitor0"
VendorName "SEC"
ModelName "3053"
# Option "DPMS" "true"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
#Option "NewPLL" # [<bool>]
#Option "ZaphodHeads" # <str>
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "M880G [Mobility Radeon HD 4200]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Reply to: