Bug#617256: Output follow-up 3
Output follow-up 3
Compiling only driver HPSA as part of the kernel, thus NOT a module.
This case is interesting, as this case also fails! - but if I compile
HPSA as a module stuff starts to work... hmmm.
Loading Linux 2.6.38-rc7-only-hpsa-no-cciss+ ...
Loading initial ramdisk ...
[ 0.127209] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Loading, please wait...
[ 5.034037] ixgbe 0000:0f:00.1: HW Init failed: -21
[ 8.395078] ixgbe 0000:12:00.1: HW Init failed: -21
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-uuid/7afb0175-deb2-4dc4-9a48-bf075cb14ca2 does not exist.
Dropping to a shell!
BusyBox v1.17.1 (Debian 1:1.17.1-8) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs) (initramfs) ls /dev/sd*
/dev/sda /dev/sda11 /dev/sda5 /dev/sda8 /dev/sdb1
/dev/sda1 /dev/sda2 /dev/sda6 /dev/sda9 /dev/sdb2
/dev/sda10 /dev/sda3 /dev/sda7 /dev/sdb /dev/sdb3
(initramfs)
(initramfs) ls /dev/disk
ls: /dev/disk: No such file or directory
(initramfs)
(initramfs) ls /dev/cciss
ls: /dev/cciss: No such file or directory
(initramfs)
Reply to: