Bug#613317: Same problem w/fresh install of debian 6
I did a fresh install of debian 6 - amd64, and have the same or
similar problem.
dmesg and Xorg logs attached.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=a45e63b1-cdb6-4297-a49b-818f799c8918 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf6d0000 - 00000000bf6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6e3000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0xbf6d0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6d0000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf6d0000 page 4k
[ 0.000000] kernel direct mapping tables up to bf6d0000 @ 8000-d000
[ 0.000000] RAMDISK: 37741000 - 37fef011
[ 0.000000] ACPI: RSDP 00000000000f76a0 00024 (v02 TOSQCI)
[ 0.000000] ACPI: XSDT 00000000bf6d2cae 00074 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bf6dfc92 000F4 (v03 TOSQCI TOSQCI00 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bf6d4136 0BAE8 (v02 TOSQCI N.Jersey 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bf6e2fc0 00040
[ 0.000000] ACPI: HPET 00000000bf6dfd86 00038 (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bf6dfdbe 0003C (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000bf6dfdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bf6dfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000bf6dfe8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000bf6d3e89 002AD (v01 SataRe SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf6d32ae 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf6d3208 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf6d2d22 004E6 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bf6d0000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000bf6d0000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 000000000002aedf] pages 18
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bf6d0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a414] TEXT DATA BSS ==> [0001000000 - 000168a414]
[ 0.000000] #3 [0037741000 - 0037fef011] RAMDISK ==> [0037741000 - 0037fef011]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b1e4] BRK ==> [000168b000 - 000168b1e4]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f7750] f7750
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001c00000-ffff8800045fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf6d0
[ 0.000000] On node 0 totalpages: 783983
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3841 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10664 pages used for memmap
[ 0.000000] DMA32 zone: 769320 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u1048576
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773161
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=a45e63b1-cdb6-4297-a49b-818f799c8918 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3076756k/3136320k available (3079k kernel code, 388k absent, 59176k reserved, 1892k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.128 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.25 BogoMIPS (lpj=7980512)
[ 0.004027] Security Framework initialized
[ 0.004034] SELinux: Disabled at boot.
[ 0.004437] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009130] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010741] Mount-cache hash table entries: 256
[ 0.010935] Initializing cgroup subsys ns
[ 0.010941] Initializing cgroup subsys cpuacct
[ 0.010945] Initializing cgroup subsys devices
[ 0.010948] Initializing cgroup subsys freezer
[ 0.010950] Initializing cgroup subsys net_cls
[ 0.010981] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010984] CPU: L2 cache: 2048K
[ 0.010988] CPU 0/0x0 -> Node 0
[ 0.010990] CPU: Physical Processor ID: 0
[ 0.010991] CPU: Processor Core ID: 0
[ 0.010995] mce: CPU supports 6 MCE banks
[ 0.011002] CPU0: Thermal monitoring handled by SMI
[ 0.011008] using mwait in idle threads.
[ 0.011010] Performance Events: Core2 events, Intel PMU driver.
[ 0.011016] ... version: 2
[ 0.011018] ... bit width: 40
[ 0.011019] ... generic registers: 2
[ 0.011021] ... value mask: 000000ffffffffff
[ 0.011023] ... max period: 000000007fffffff
[ 0.011025] ... fixed-purpose events: 3
[ 0.011026] ... event mask: 0000000700000003
[ 0.012105] ACPI: Core revision 20090903
[ 0.024077] Setting APIC routing to flat
[ 0.024440] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066293] CPU0: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz stepping 0d
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.152107] CPU1: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz stepping 0d
[ 0.152115] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156021] Brought up 2 CPUs
[ 0.156024] Total of 2 processors activated (7980.26 BogoMIPS).
[ 0.156481] CPU0 attaching sched-domain:
[ 0.156484] domain 0: span 0-1 level MC
[ 0.156487] groups: 0 1
[ 0.156492] CPU1 attaching sched-domain:
[ 0.156495] domain 0: span 0-1 level MC
[ 0.156497] groups: 1 0
[ 0.156556] devtmpfs: initialized
[ 0.158908] regulator: core version 0.5
[ 0.158908] NET: Registered protocol family 16
[ 0.158908] ACPI: bus type pci registered
[ 0.160013] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.160016] PCI: MCFG area at e0000000 reserved in E820
[ 0.166242] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.166244] PCI: Using configuration type 1 for base access
[ 0.166597] bio: create slab <bio-0> at 0
[ 0.166597] ACPI: EC: Look up EC in DSDT
[ 0.172534] ACPI: BIOS _OSI(Linux) query ignored
[ 0.200001] ACPI: Interpreter enabled
[ 0.200001] ACPI: (supports S0 S3 S4 S5)
[ 0.200001] ACPI: Using IOAPIC for interrupt routing
[ 0.209519] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.209519] ACPI: No dock devices found.
[ 0.209975] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 0.209981] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bee3c580), AE_NOT_FOUND
[ 0.210012] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.212026] pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf00fffff]
[ 0.212034] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.212040] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.212081] pci 0000:00:02.1: reg 10 64bit mmio: [0xf0100000-0xf01fffff]
[ 0.212198] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.212267] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.212346] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0704800-0xf0704bff]
[ 0.212413] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.212419] pci 0000:00:1a.7: PME# disabled
[ 0.212478] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff]
[ 0.212544] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.212549] pci 0000:00:1b.0: PME# disabled
[ 0.212650] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.212654] pci 0000:00:1c.0: PME# disabled
[ 0.212762] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.212767] pci 0000:00:1c.3: PME# disabled
[ 0.212871] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.212876] pci 0000:00:1c.4: PME# disabled
[ 0.212979] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.212984] pci 0000:00:1c.5: PME# disabled
[ 0.213052] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
[ 0.213123] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
[ 0.213194] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
[ 0.213269] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0704c00-0xf0704fff]
[ 0.213336] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.213342] pci 0000:00:1d.7: PME# disabled
[ 0.213528] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.213533] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.213538] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.213544] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0200 (mask 0013)
[ 0.213549] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 0.213605] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.213613] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.213622] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.213630] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.213638] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.213718] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07]
[ 0.213727] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7]
[ 0.213735] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df]
[ 0.213743] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3]
[ 0.213751] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.213760] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0704000-0xf07047ff]
[ 0.213806] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.213811] pci 0000:00:1f.2: PME# disabled
[ 0.213847] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.213873] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
[ 0.213966] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 0.213971] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.213980] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.214044] pci 0000:00:1c.3: bridge io port: [0x00-0xfff]
[ 0.214049] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.214057] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.214140] pci 0000:07:00.0: reg 10 64bit mmio: [0xf0200000-0xf0203fff]
[ 0.214153] pci 0000:07:00.0: reg 18 io port: [0x2000-0x20ff]
[ 0.214245] pci 0000:07:00.0: supports D1 D2
[ 0.214247] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214254] pci 0000:07:00.0: PME# disabled
[ 0.220131] pci 0000:00:1c.4: bridge io port: [0x00-0xfff]
[ 0.220137] pci 0000:00:1c.4: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.220145] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.220297] pci 0000:08:00.0: reg 10 32bit mmio: [0xf0300000-0xf0300fff]
[ 0.220544] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.220557] pci 0000:08:00.0: PME# disabled
[ 0.220667] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.220827] pci 0000:00:1c.5: bridge io port: [0x00-0xfff]
[ 0.220832] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.220841] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.220888] pci 0000:0a:01.0: reg 10 32bit mmio: [0xf0400000-0xf0400fff]
[ 0.220897] pci 0000:0a:01.0: reg 14 32bit mmio: [0xf0402000-0xf04027ff]
[ 0.220952] pci 0000:0a:01.0: supports D1 D2
[ 0.220954] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220959] pci 0000:0a:01.0: PME# disabled
[ 0.221012] pci 0000:0a:01.2: reg 10 32bit mmio: [0xf0402800-0xf04028ff]
[ 0.221085] pci 0000:0a:01.2: supports D1 D2
[ 0.221087] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221093] pci 0000:0a:01.2: PME# disabled
[ 0.221146] pci 0000:0a:01.3: reg 10 32bit mmio: [0xf0401000-0xf0401fff]
[ 0.221218] pci 0000:0a:01.3: supports D1 D2
[ 0.221221] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221226] pci 0000:0a:01.3: PME# disabled
[ 0.221308] pci 0000:00:1e.0: transparent bridge
[ 0.221317] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[ 0.221360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.221583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.221671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.221745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.221825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.221931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.222062] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 0.222067] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bee3c580), AE_NOT_FOUND
[ 0.236498] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.236610] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.236718] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.236826] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.236934] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.237043] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.237150] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.237258] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.237373] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.237389] vgaarb: loaded
[ 0.237404] PCI: Using ACPI for IRQ routing
[ 0.237404] pci 0000:00:1c.0: BAR 13: can't allocate resource
[ 0.237404] pci 0000:00:1c.0: BAR 14: can't allocate resource
[ 0.237404] pci 0000:00:1c.0: BAR 15: can't allocate resource
[ 0.237404] pci 0000:00:1c.3: BAR 13: can't allocate resource
[ 0.237404] pci 0000:00:1c.3: BAR 14: can't allocate resource
[ 0.237404] pci 0000:00:1c.3: BAR 15: can't allocate resource
[ 0.237404] pci 0000:00:1c.4: BAR 13: can't allocate resource
[ 0.237404] pci 0000:00:1c.4: BAR 14: can't allocate resource
[ 0.237404] pci 0000:00:1c.4: BAR 15: can't allocate resource
[ 0.237404] pci 0000:00:1c.5: BAR 13: can't allocate resource
[ 0.237404] pci 0000:00:1c.5: BAR 14: can't allocate resource
[ 0.237404] pci 0000:00:1c.5: BAR 15: can't allocate resource
[ 0.237404] pci 0000:07:00.0: BAR 0: no parent found for of device [0xf0200000-0xf0203fff]
[ 0.237404] pci 0000:07:00.0: BAR 0: can't allocate resource
[ 0.237404] pci 0000:07:00.0: BAR 2: no parent found for of device [0x2000-0x20ff]
[ 0.237404] pci 0000:07:00.0: BAR 2: can't allocate resource
[ 0.237404] pci 0000:08:00.0: BAR 0: no parent found for of device [0xf0300000-0xf0300fff]
[ 0.237404] pci 0000:08:00.0: BAR 0: can't allocate resource
[ 0.237404] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.237404] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.244021] Switching to clocksource tsc
[ 0.245313] pnp: PnP ACPI init
[ 0.245324] ACPI: bus type pnp registered
[ 0.247243] pnp 00:05: io resource (0x2e-0x2f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.247246] pnp 00:05: io resource (0x4e-0x4f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.247250] pnp 00:05: io resource (0x61-0x61) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.247253] pnp 00:05: io resource (0x63-0x63) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.247257] pnp 00:05: io resource (0x65-0x65) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.247260] pnp 00:05: io resource (0x67-0x67) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.247264] pnp 00:05: io resource (0x68-0x68) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.247267] pnp 00:05: io resource (0x6c-0x6c) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.247270] pnp 00:05: io resource (0x80-0x80) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.247274] pnp 00:05: io resource (0x92-0x92) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.247277] pnp 00:05: io resource (0xb2-0xb3) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 0.248907] pnp: PnP ACPI: found 9 devices
[ 0.248909] ACPI: ACPI bus type pnp unregistered
[ 0.248937] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.248940] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.248943] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.248964] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.248968] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.248971] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.248974] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.248977] system 00:01: iomem range 0xff80000-0xff8ffff could not be reserved
[ 0.249002] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.249009] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.249030] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 0.249033] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 0.249036] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.254496] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.254518] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.254525] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
[ 0.254531] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff
[ 0.254557] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[ 0.254561] pci 0000:00:1c.3: IO window: 0x3000-0x3fff
[ 0.254586] pci 0000:00:1c.3: MEM window: 0xc0400000-0xc05fffff
[ 0.254591] pci 0000:00:1c.3: PREFETCH window: 0x000000c0600000-0x000000c07fffff
[ 0.254651] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
[ 0.254654] pci 0000:00:1c.4: IO window: 0x4000-0x4fff
[ 0.254661] pci 0000:00:1c.4: MEM window: 0xc0800000-0xc09fffff
[ 0.254684] pci 0000:00:1c.4: PREFETCH window: 0x000000c0a00000-0x000000c0bfffff
[ 0.254721] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[ 0.254725] pci 0000:00:1c.5: IO window: 0x5000-0x5fff
[ 0.254750] pci 0000:00:1c.5: MEM window: 0xc0c00000-0xc0dfffff
[ 0.254755] pci 0000:00:1c.5: PREFETCH window: 0x000000c0e00000-0x000000c0ffffff
[ 0.254782] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.254783] pci 0000:00:1e.0: IO window: disabled
[ 0.254790] pci 0000:00:1e.0: MEM window: 0xf0400000-0xf04fffff
[ 0.254813] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.254847] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.254853] alloc irq_desc for 17 on node -1
[ 0.254855] alloc kstat_irqs on node -1
[ 0.254879] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.254886] pci 0000:00:1c.0: setting latency timer to 64
[ 0.254915] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.254919] alloc irq_desc for 19 on node -1
[ 0.254921] alloc kstat_irqs on node -1
[ 0.254942] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.254949] pci 0000:00:1c.3: setting latency timer to 64
[ 0.254977] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 0.254982] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.255006] pci 0000:00:1c.4: setting latency timer to 64
[ 0.255017] pci 0000:00:1c.5: enabling device (0000 -> 0003)
[ 0.255039] alloc irq_desc for 16 on node -1
[ 0.255041] alloc kstat_irqs on node -1
[ 0.255044] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.255051] pci 0000:00:1c.5: setting latency timer to 64
[ 0.255078] pci 0000:00:1e.0: setting latency timer to 64
[ 0.255083] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.255104] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.255106] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.255109] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc01fffff]
[ 0.255111] pci_bus 0000:02: resource 2 pref mem [0xc0200000-0xc03fffff]
[ 0.255114] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff]
[ 0.255134] pci_bus 0000:06: resource 1 mem: [0xc0400000-0xc05fffff]
[ 0.255137] pci_bus 0000:06: resource 2 pref mem [0xc0600000-0xc07fffff]
[ 0.255139] pci_bus 0000:07: resource 0 io: [0x4000-0x4fff]
[ 0.255142] pci_bus 0000:07: resource 1 mem: [0xc0800000-0xc09fffff]
[ 0.255144] pci_bus 0000:07: resource 2 pref mem [0xc0a00000-0xc0bfffff]
[ 0.255147] pci_bus 0000:08: resource 0 io: [0x5000-0x5fff]
[ 0.255167] pci_bus 0000:08: resource 1 mem: [0xc0c00000-0xc0dfffff]
[ 0.255169] pci_bus 0000:08: resource 2 pref mem [0xc0e00000-0xc0ffffff]
[ 0.255172] pci_bus 0000:0a: resource 1 mem: [0xf0400000-0xf04fffff]
[ 0.255175] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.255177] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.255264] NET: Registered protocol family 2
[ 0.255676] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.259079] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.272701] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.274442] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.274445] TCP reno registered
[ 0.274737] NET: Registered protocol family 1
[ 0.274797] pci 0000:00:02.0: Boot video device
[ 0.275284] Unpacking initramfs...
[ 0.782020] Freeing initrd memory: 8888k freed
[ 0.793045] Simple Boot Flag at 0x36 set to 0x1
[ 0.793881] audit: initializing netlink socket (disabled)
[ 0.793914] type=2000 audit(1299231625.791:1): initialized
[ 0.801698] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.805052] VFS: Disk quotas dquot_6.5.2
[ 0.805179] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.805369] msgmni has been set to 6026
[ 0.805812] alg: No test for stdrng (krng)
[ 0.805918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.805939] io scheduler noop registered
[ 0.805941] io scheduler anticipatory registered
[ 0.805943] io scheduler deadline registered
[ 0.806013] io scheduler cfq registered (default)
[ 0.806385] alloc irq_desc for 24 on node -1
[ 0.806387] alloc kstat_irqs on node -1
[ 0.806420] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.806450] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.806810] alloc irq_desc for 25 on node -1
[ 0.806811] alloc kstat_irqs on node -1
[ 0.806838] pcieport 0000:00:1c.3: irq 25 for MSI/MSI-X
[ 0.806868] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.807227] alloc irq_desc for 26 on node -1
[ 0.807229] alloc kstat_irqs on node -1
[ 0.807256] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.807268] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.807643] alloc irq_desc for 27 on node -1
[ 0.807645] alloc kstat_irqs on node -1
[ 0.807654] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.807684] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.811837] Linux agpgart interface v0.103
[ 0.811869] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.812591] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 0.823911] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.824036] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.824843] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.824995] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.828225] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.830489] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.830516] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.830519] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.830522] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.830525] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.830746] mice: PS/2 mouse device common for all mice
[ 0.830841] rtc_cmos 00:06: RTC can wake from S4
[ 0.830911] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.830998] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.831011] cpuidle: using governor ladder
[ 0.831031] cpuidle: using governor menu
[ 0.831035] No iBFT detected.
[ 0.831766] TCP cubic registered
[ 0.832025] NET: Registered protocol family 10
[ 0.833019] lo: Disabled Privacy Extensions
[ 0.833658] Mobile IPv6
[ 0.833679] NET: Registered protocol family 17
[ 0.833875] PM: Resume from disk failed.
[ 0.833905] registered taskstats version 1
[ 0.835239] rtc_cmos 00:06: setting system clock to 2011-03-04 09:40:26 UTC (1299231626)
[ 0.835333] Initalizing network drop monitor service
[ 0.835394] Freeing unused kernel memory: 592k freed
[ 0.835809] Write protecting the kernel read-only data: 4236k
[ 0.862981] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.869295] udev[56]: starting version 164
[ 1.133388] usbcore: registered new interface driver usbfs
[ 1.133451] usbcore: registered new interface driver hub
[ 1.133521] usbcore: registered new device driver usb
[ 1.139673] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.139748] alloc irq_desc for 18 on node -1
[ 1.139769] alloc kstat_irqs on node -1
[ 1.139778] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.139834] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.139838] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.139877] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.139966] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.140765] SCSI subsystem initialized
[ 1.143859] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.149056] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0704800
[ 1.165010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.165071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.165074] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.165076] usb usb1: Product: EHCI Host Controller
[ 1.165096] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.165098] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.165385] usb usb1: configuration #1 chosen from 1 choice
[ 1.165518] hub 1-0:1.0: USB hub found
[ 1.165545] hub 1-0:1.0: 4 ports detected
[ 1.165708] alloc irq_desc for 23 on node -1
[ 1.165710] alloc kstat_irqs on node -1
[ 1.165717] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.165772] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.165776] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.165803] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.165870] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.169773] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.169806] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0704c00
[ 1.172025] libata version 3.00 loaded.
[ 1.185014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.185102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.185105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.185107] usb usb2: Product: EHCI Host Controller
[ 1.185109] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.185111] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.185364] usb usb2: configuration #1 chosen from 1 choice
[ 1.185516] hub 2-0:1.0: USB hub found
[ 1.185524] hub 2-0:1.0: 6 ports detected
[ 1.187497] ata_piix 0000:00:1f.1: version 2.13
[ 1.187529] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.187630] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.192130] sky2 driver version 1.28
[ 1.192158] scsi0 : ata_piix
[ 1.192218] sky2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.192250] sky2 0000:07:00.0: setting latency timer to 64
[ 1.192316] sky2 0000:07:00.0: Yukon-2 FE+ chip revision 0
[ 1.192360] scsi1 : ata_piix
[ 1.192548] alloc irq_desc for 28 on node -1
[ 1.192550] alloc kstat_irqs on node -1
[ 1.192585] sky2 0000:07:00.0: irq 28 for MSI/MSI-X
[ 1.193988] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.193991] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.194854] sky2 eth0: addr 00:1e:68:8a:cc:e8
[ 1.195531] ata2: port disabled. ignoring.
[ 1.200572] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.200673] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.200702] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.200706] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.200737] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.200838] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.200935] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.200938] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.200958] usb usb3: Product: UHCI Host Controller
[ 1.200960] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.200962] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.201224] usb usb3: configuration #1 chosen from 1 choice
[ 1.201373] hub 3-0:1.0: USB hub found
[ 1.201380] hub 3-0:1.0: 2 ports detected
[ 1.201532] alloc irq_desc for 21 on node -1
[ 1.201534] alloc kstat_irqs on node -1
[ 1.201541] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.201565] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.201569] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.201599] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.201672] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.201760] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.201763] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.201765] usb usb4: Product: UHCI Host Controller
[ 1.201767] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.201769] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.202044] firewire_ohci 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.202174] usb usb4: configuration #1 chosen from 1 choice
[ 1.202304] hub 4-0:1.0: USB hub found
[ 1.202312] hub 4-0:1.0: 2 ports detected
[ 1.202439] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.202464] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.202468] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.202493] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.202559] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 1.202631] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.202652] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.202654] usb usb5: Product: UHCI Host Controller
[ 1.202656] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.202658] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.202878] usb usb5: configuration #1 chosen from 1 choice
[ 1.203009] hub 5-0:1.0: USB hub found
[ 1.203035] hub 5-0:1.0: 2 ports detected
[ 1.203140] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.203165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.203168] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.203175] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.203557] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 1.203685] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.203687] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.203708] usb usb6: Product: UHCI Host Controller
[ 1.203710] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.203712] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.203941] usb usb6: configuration #1 chosen from 1 choice
[ 1.204104] hub 6-0:1.0: USB hub found
[ 1.204132] hub 6-0:1.0: 2 ports detected
[ 1.204264] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.204290] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.204294] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.204319] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.204386] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 1.204479] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.204481] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.204483] usb usb7: Product: UHCI Host Controller
[ 1.204485] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.204487] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.204709] usb usb7: configuration #1 chosen from 1 choice
[ 1.204838] hub 7-0:1.0: USB hub found
[ 1.204863] hub 7-0:1.0: 2 ports detected
[ 1.214736] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.214762] ACPI: Thermal Zone [THRM] (31 C)
[ 1.223774] ahci 0000:00:1f.2: version 3.0
[ 1.223831] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.223936] alloc irq_desc for 29 on node -1
[ 1.223956] alloc kstat_irqs on node -1
[ 1.223988] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 1.224187] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.224191] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 1.224214] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.224733] scsi2 : ahci
[ 1.224921] scsi3 : ahci
[ 1.225093] scsi4 : ahci
[ 1.225462] ata3: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704100 irq 29
[ 1.225466] ata4: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704180 irq 29
[ 1.225470] ata5: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704200 irq 29
[ 1.272011] firewire_ohci: Added fw-ohci device 0000:0a:01.0, OHCI version 1.10
[ 1.357816] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, TS05, max UDMA/33
[ 1.377579] ata1.00: configured for UDMA/33
[ 1.381825] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U10N TS05 PQ: 0 ANSI: 5
[ 1.496034] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 1.544038] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.544099] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.544137] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.544998] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.545029] ata3.00: _GTF unexpected object type 0x1
[ 1.603547] ata3.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100
[ 1.603550] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.604760] ata3.00: _GTF unexpected object type 0x1
[ 1.605043] ata3.00: configured for UDMA/100
[ 1.621200] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
[ 1.629938] sdhci: Secure Digital Host Controller Interface driver
[ 1.629941] sdhci: Copyright(c) Pierre Ossman
[ 1.632243] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2)
[ 1.632301] sdhci-pci 0000:0a:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.632367] mmc0: Unknown controller version (2). You may experience problems.
[ 1.632593] Registered led device: mmc0::
[ 1.634764] mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA
[ 1.641997] usb 2-4: New USB device found, idVendor=04f2, idProduct=b008
[ 1.642001] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.642004] usb 2-4: Product: Chicony USB 2.0 Camera
[ 1.642006] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.642026] usb 2-4: SerialNumber: SN0001
[ 1.642223] usb 2-4: configuration #1 chosen from 1 choice
[ 1.646242] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.646371] sd 2:0:0:0: [sda] Write Protect is off
[ 1.646373] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.646433] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.646809] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 1.736263] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.751916] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.751919] Uniform CD-ROM driver Revision: 3.20
[ 1.752141] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.760674] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.760765] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.773211] firewire_core: created device fw0: GUID 001b2400010d78ab, S400
[ 2.524148] PM: Starting manual resume from disk
[ 2.524152] PM: Resume from partition 8:5
[ 2.524154] PM: Checking hibernation image.
[ 2.533045] PM: Error -22 checking image file
[ 2.533047] PM: Resume from disk failed.
[ 2.579518] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 2.579540] EXT4-fs (sda6): write access will be enabled during recovery
[ 3.933622] EXT4-fs (sda6): orphan cleanup on readonly fs
[ 3.933630] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 8912940
[ 3.934005] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 396261
[ 3.934100] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 393350
[ 3.934168] EXT4-fs (sda6): 3 orphan inodes deleted
[ 3.934171] EXT4-fs (sda6): recovery complete
[ 4.245244] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 6.563147] udev[374]: starting version 164
[ 6.998293] ACPI: SSDT 00000000bf6d3b89 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 7.041918] ACPI: SSDT 00000000bf6d350d 005F7 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 7.118557] Monitor-Mwait will be used to enter C-1 state
[ 7.118600] Monitor-Mwait will be used to enter C-2 state
[ 7.118657] Monitor-Mwait will be used to enter C-3 state
[ 7.118663] Marking TSC unstable due to TSC halts in idle
[ 7.118939] processor LNXCPU:00: registered as cooling_device0
[ 7.119940] ACPI: SSDT 00000000bf6d3dc1 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 7.120835] ACPI: SSDT 00000000bf6d3b04 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 7.123761] Switching to clocksource hpet
[ 7.137547] processor LNXCPU:01: registered as cooling_device1
[ 7.229245] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 7.476854] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 7.476878] ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI region SMBI [0x1c20-0x1c2f]
[ 7.477035] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.940559] ACPI: Battery Slot [BAT1] (battery present)
[ 7.940831] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 7.941223] ACPI: Lid Switch [LID]
[ 7.944068] ACPI: AC Adapter [ACAD] (on-line)
[ 7.944553] ACPI: WMI: Mapper loaded
[ 7.947100] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 7.947233] ACPI: Power Button [PWRB]
[ 7.947424] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.947487] ACPI: Power Button [PWRF]
[ 8.019262] Linux video capture interface: v2.00
[ 8.042622] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 8.046338] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input6
[ 8.046458] usbcore: registered new interface driver uvcvideo
[ 8.046461] USB Video Class driver (v0.1.0)
[ 8.115052] cfg80211: Using static regulatory domain info
[ 8.115054] cfg80211: Regulatory domain: US
[ 8.115056] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.115059] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 8.115081] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.115083] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.115086] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.115089] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.115092] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 8.115856] cfg80211: Calling CRDA for country: US
[ 8.154894] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000/0x20000
[ 8.200701] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 8.648426] [drm] Initialized drm 1.1.0 20060810
[ 8.940160] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.940165] i915 0000:00:02.0: setting latency timer to 64
[ 8.964235] alloc irq_desc for 30 on node -1
[ 8.964238] alloc kstat_irqs on node -1
[ 8.964266] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[ 8.964292] [drm] set up 7M of stolen space
[ 9.073991] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 9.073995] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 9.074187] iwl3945 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.074220] iwl3945 0000:08:00.0: setting latency timer to 64
[ 9.161760] [drm] initialized overlay support
[ 9.169635] iwl3945 0000:08:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 9.169638] iwl3945 0000:08:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 9.170157] alloc irq_desc for 31 on node -1
[ 9.170159] alloc kstat_irqs on node -1
[ 9.170297] iwl3945 0000:08:00.0: irq 31 for MSI/MSI-X
[ 9.375844] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 9.704925] Console: switching to colour frame buffer device 160x50
[ 9.711730] fb0: inteldrmfb frame buffer device
[ 9.711732] registered panic notifier
[ 9.720491] acpi device:01: registered as cooling_device2
[ 9.731776] acpi device:02: registered as cooling_device3
[ 9.741457] acpi device:03: registered as cooling_device4
[ 9.748443] acpi device:04: registered as cooling_device5
[ 9.761457] acpi device:05: registered as cooling_device6
[ 9.762247] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 9.762416] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.762828] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.762954] alloc irq_desc for 22 on node -1
[ 9.762957] alloc kstat_irqs on node -1
[ 9.762984] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.763088] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.980976] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.981203] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.981356] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.939336] Adding 2000048k swap on /dev/sda5. Priority:-1 extents:1 across:2000048k
[ 11.287332] loop: module loaded
[ 12.805071] fuse init (API version 7.13)
[ 14.834727] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 17.694292] sky2 eth0: enabling interface
[ 17.695642] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.795554] iwl3945 0000:08:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 17.929725] iwl3945 0000:08:00.0: loaded firmware version 15.32.2.9
[ 18.043580] Registered led device: iwl-phy0::radio
[ 18.043618] Registered led device: iwl-phy0::assoc
[ 18.043654] Registered led device: iwl-phy0::RX
[ 18.043717] Registered led device: iwl-phy0::TX
[ 18.060971] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.805122] CE: hpet increasing min_delta_ns to 15000 nsec
[ 58.660459] wlan0: direct probe to AP 00:1d:7e:59:cb:45 (try 1)
[ 58.662708] wlan0: direct probe responded
[ 58.662734] wlan0: authenticate with AP 00:1d:7e:59:cb:45 (try 1)
[ 58.664959] wlan0: authenticated
[ 58.665027] wlan0: associate with AP 00:1d:7e:59:cb:45 (try 1)
[ 58.667499] wlan0: RX AssocResp from 00:1d:7e:59:cb:45 (capab=0x411 status=0 aid=1)
[ 58.667523] wlan0: associated
[ 58.677930] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 59.586861] padlock: VIA PadLock not detected.
[ 69.632059] wlan0: no IPv6 routers present
[ 84.361090] CE: hpet increasing min_delta_ns to 22500 nsec
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-trunk-amd64 x86_64 Debian
Current Operating System: Linux bll-laptop 2.6.32-5-amd64 #1 SMP Wed Jan 12 03:40:32 UTC 2011 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=a45e63b1-cdb6-4297-a49b-818f799c8918 ro quiet
Build Date: 18 February 2011 08:27:24PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 4 09:40:45 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c8aa0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a02:1179:ff50 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a03:1179:ff50 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0100000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.13.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: SEC Model: 3741 Serial#: 0
(II) intel(0): Year: 2007 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 18
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.320 greenY: 0.540
(II) intel(0): blueX: 0.155 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 71.0 MHz Image Size: 286 x 179 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): SAMSUNG
(II) intel(0): LTN133AT07G01
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca3413700000000
(II) intel(0): 00110103801d12780a81d59457528a27
(II) intel(0): 21505400000001010101010101010101
(II) intel(0): 010101010101bc1b00a0502017303020
(II) intel(0): 36001eb3100000190000000f00000000
(II) intel(0): 00000000002387026400000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c544e313333415430374730310086
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): [DRI2] Setup complete
(II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): [XvMC] i965_xvmc driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/udev: Adding input device Power Button (/dev/input/event5)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Video Bus (/dev/input/event8)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Lid Switch (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Chicony USB 2.0 Camera (/dev/input/event6)
(**) Chicony USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
(**) Chicony USB 2.0 Camera: always reports core events
(**) Chicony USB 2.0 Camera: Device: "/dev/input/event6"
(II) Chicony USB 2.0 Camera: Found keys
(II) Chicony USB 2.0 Camera: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB 2.0 Camera" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event7"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
SynPS/2 Synaptics TouchPad no synaptics event device found
(**) Option "Device" "/dev/input/mouse1"
Query no Synaptics: 6003C8
(--) SynPS/2 Synaptics TouchPad: no supported touchpad found
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device PC Speaker (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) intel(0): EDID vendor "SEC", prod id 14145
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "SEC", prod id 14145
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "SEC", prod id 14145
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "SEC", prod id 14145
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "SEC", prod id 14145
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "SEC", prod id 14145
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "SEC", prod id 14145
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
Reply to: