Bug#616110: linux: Kernel module pcspkr implemented, but snd_pcsp required in Squeeze
Package: linux-2.6
Version: 2.6.32-30
Severity: normal
File: linux
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=99d9aa17-2e81-494b-bcb1-2f01586c9026 ro verbose
** Not tainted
** Kernel log:
[ 4.932932] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1
[ 4.935050] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 4.935467] [drm] nouveau 0000:02:00.0: Detected a DAC output
[ 4.935510] [drm] nouveau 0000:02:00.0: Detected a TMDS output
[ 4.935552] [drm] nouveau 0000:02:00.0: Detected a DAC output
[ 4.935594] [drm] nouveau 0000:02:00.0: Detected a TMDS output
[ 4.935637] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[ 4.935680] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[ 4.935773] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[ 4.988336] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[ 4.988391] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
[ 4.988456] hda_intel: Disable MSI for Nvidia chipset
[ 4.988534] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 5.115674] [drm] nouveau 0000:02:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff88011e373e00
[ 5.119961] [drm] nouveau 0000:02:00.0: 0xC0AE: parsing output script 1
[ 5.119974] [drm] nouveau 0000:02:00.0: 0xC0AF: parsing output script 2
[ 5.119986] [drm] nouveau 0000:02:00.0: 0xBD9A: parsing clock script 0
[ 5.120278] [drm] nouveau 0000:02:00.0: 0xB6D6: parsing clock script 1
[ 5.120526] Console: switching to colour frame buffer device 160x64
[ 5.122234] fb0: nouveaufb frame buffer device
[ 5.122244] registered panic notifier
[ 5.122255] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0
[ 5.147033] usb 2-1: New USB device found, idVendor=0a81, idProduct=0205
[ 5.147048] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.147056] usb 2-1: Product: PS2 to USB Converter
[ 5.147062] usb 2-1: Manufacturer: CHESEN
[ 5.147135] usb 2-1: configuration #1 chosen from 1 choice
[ 5.197040] usbcore: registered new interface driver hiddev
[ 5.205268] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input5
[ 5.205352] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:02.0-1/input0
[ 5.217330] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/input/input6
[ 5.217431] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:02.0-1/input1
[ 5.217463] usbcore: registered new interface driver usbhid
[ 5.217470] usbhid: v2.6:USB HID core driver
[ 5.568520] usb 4-2: new full speed USB device using ohci_hcd and address 2
[ 5.793039] usb 4-2: New USB device found, idVendor=03f0, idProduct=8704
[ 5.793048] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.793055] usb 4-2: Product: Deskjet 5900 series
[ 5.793061] usb 4-2: Manufacturer: HP
[ 5.793065] usb 4-2: SerialNumber: CN62B1T0HM04KF
[ 5.793149] usb 4-2: configuration #1 chosen from 1 choice
[ 5.884083] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input7
[ 6.208121] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8704
[ 6.208153] usbcore: registered new interface driver usblp
[ 19.152022] scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 19.152024] <Adaptec 2930CU SCSI adapter>
[ 19.152025] aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
[ 19.152026]
[ 89.331100] EXT3 FS on sda3, internal journal
[ 89.370960] device-mapper: uevent: version 1.0.3
[ 89.371433] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 89.493942] loop: module loaded
[ 89.521532] usbcore: registered new interface driver snd-usb-audio
[ 89.532656] usbcore: registered new interface driver usbserial
[ 89.532946] USB Serial support registered for generic
[ 89.533225] usbcore: registered new interface driver usbserial_generic
[ 89.533575] usbserial: USB Serial Driver core
[ 89.539079] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 89.539387] usbcore: registered new interface driver cyberjack
[ 89.539663] cyberjack: v1.01 Matthias Bruestle
[ 89.540115] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[ 89.752702] kjournald starting. Commit interval 5 seconds
[ 89.753020] EXT3 FS on sda1, internal journal
[ 89.753362] EXT3-fs: mounted filesystem with ordered data mode.
[ 90.148209] fuse init (API version 7.13)
[ 90.584811] NET: Registered protocol family 15
[ 90.596351] alg: No test for cipher_null (cipher_null-generic)
[ 90.596697] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 90.597021] alg: No test for digest_null (digest_null-generic)
[ 90.597381] alg: No test for compress_null (compress_null-generic)
[ 90.619558] padlock: VIA PadLock Hash Engine not detected.
[ 90.634330] padlock: VIA PadLock Hash Engine not detected.
[ 90.662678] padlock: VIA PadLock not detected.
[ 91.693209] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[ 91.693221] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 91.693222] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 92.484469] alloc irq_desc for 29 on node 0
[ 92.484472] alloc kstat_irqs on node 0
[ 92.484481] forcedeth 0000:00:0a.0: irq 29 for MSI/MSI-X
[ 92.509848] [drm] nouveau 0000:02:00.0: Allocating FIFO number 2
[ 92.511962] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 95.238347] lp: driver loaded but no devices found
[ 95.371159] ppdev: user-space parallel port driver
[ 97.356173] usb 4-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 103.336018] eth0: no IPv6 routers present
[ 113.563561] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 117.326032] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 117.362796] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 117.363154] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 117.363157] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 117.363159] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 129.340022] usb 4-1: new full speed USB device using ohci_hcd and address 3
[ 129.564092] usb 4-1: New USB device found, idVendor=0c4b, idProduct=0400
[ 129.564096] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 129.564098] usb 4-1: Product: cyberJack e-com(a)
[ 129.564100] usb 4-1: Manufacturer: Reiner-SCT
[ 129.564101] usb 4-1: SerialNumber: 2004143581
[ 129.564198] usb 4-1: configuration #1 chosen from 1 choice
[ 155.228122] usb 4-1: usbfs: process 3460 (ctapi-proxy) did not claim interface 0 before use
[ 435.831217] usb 4-1: usbfs: process 3771 (ctapi-proxy) did not claim interface 0 before use
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: Phoenix Technologies, LTD
bios_version: ASUS M3N78 PRO ACPI BIOS Revision 0701
board_vendor: ASUSTeK Computer INC.
board_name: M3N78 PRO
board_version: 1.XX
** Loaded modules:
Module Size Used by
xt_limit 1782 8
xt_tcpudp 2319 33
iptable_mangle 2817 0
ipt_LOG 4518 8
ipt_MASQUERADE 1554 0
nf_nat 13388 1 ipt_MASQUERADE
xt_DSCP 1995 0
ipt_REJECT 1953 1
nf_conntrack_irc 3347 0
nf_conntrack_ftp 5537 0
nf_conntrack_ipv4 9833 8 nf_nat
nf_defrag_ipv4 1139 1 nf_conntrack_ipv4
xt_state 1303 6
nf_conntrack 46535 6 ipt_MASQUERADE,nf_nat,nf_conntrack_irc,nf_conntrack_ftp,nf_conntrack_ipv4,xt_state
iptable_filter 2258 1
ip_tables 13899 2 iptable_mangle,iptable_filter
x_tables 12845 8 xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,xt_DSCP,ipt_REJECT,xt_state,ip_tables
snd_pcsp 6579 0
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
cpufreq_powersave 902 0
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
cpufreq_conservative 5162 0
deflate 1767 0
zlib_deflate 17746 1 deflate
ctr 3363 0
twofish 6025 0
twofish_common 13472 1 twofish
camellia 17463 0
serpent 16791 0
blowfish 7944 0
cast5 16349 0
des_generic 15475 0
cbc 2539 0
aes_x86_64 7340 0
aes_generic 25714 1 aes_x86_64
xcbc 2325 0
rmd160 7104 0
sha256_generic 8692 0
sha1_generic 1759 0
hmac 2593 0
crypto_null 2492 0
af_key 25421 0
fuse 50625 1
cyberjack 7073 0
usbserial 27399 1 cyberjack
snd_usb_audio 64070 0
snd_usb_lib 13928 1 snd_usb_audio
loop 11799 0
firewire_sbp2 11514 0
dm_crypt 10664 0
dm_mod 53754 1 dm_crypt
usblp 9571 0
snd_hda_codec_nvhdmi 3279 1
snd_hda_codec_realtek 235602 1
usbhid 33292 0
hid 63225 1 usbhid
snd_hda_intel 20019 0
snd_hda_codec 54244 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5380 2 snd_usb_audio,snd_hda_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60503 5 snd_pcsp,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4400 0
snd_rawmidi 15515 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15582 2 snd_pcm,snd_seq
nouveau 353128 2
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
ttm 39986 1 nouveau
snd 46446 13 snd_pcsp,snd_usb_audio,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 4598 1 snd
ohci_hcd 19212 0
ehci_hcd 31151 0
drm_kms_helper 20065 1 nouveau
drm 142359 4 nouveau,ttm,drm_kms_helper
aic7xxx 107123 0
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
pata_amd 9869 0
scsi_transport_spi 18774 1 aic7xxx
i2c_algo_bit 4225 1 nouveau
firewire_ohci 19676 0
k8temp 3283 0
usbcore 122034 9 cyberjack,usbserial,snd_usb_audio,snd_usb_lib,usblp,usbhid,ohci_hcd,ehci_hcd
edac_core 29261 0
i2c_nforce2 5280 0
sg 18744 0
sr_mod 12602 0
firewire_core 36848 2 firewire_sbp2,firewire_ohci
nls_base 6377 1 usbcore
video 17445 0
forcedeth 45448 0
crc_itu_t 1307 1 firewire_core
edac_mce_amd 6433 0
i2c_core 15712 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_nforce2
evdev 7352 16
cdrom 29415 1 sr_mod
wmi 4323 0
output 1692 1 video
asus_atk0110 7686 0
button 4650 1 nouveau
floppy 49087 0
processor 29935 0
ext3 106518 2
jbd 37085 1 ext3
mbcache 5050 1 ext3
sd_mod 29889 3
crc_t10dif 1276 1 sd_mod
ahci 32374 2
fan 3346 0
ata_generic 3047 0
libata 133632 3 pata_amd,ahci,ata_generic
thermal 11674 0
thermal_sys 11942 4 video,processor,fan,thermal
scsi_mod 122149 7 firewire_sbp2,aic7xxx,scsi_transport_spi,sg,sr_mod,sd_mod,libata
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at ff00 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at fdf80000 (32-bit, non-prefetchable) [size=512K]
00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:07.0 Audio device [0403]: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at f700 [size=16]
Region 5: Memory at fe026000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at f600 [size=8]
Region 2: Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe029000 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:13.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:0a.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. IEEE 1394a Firewire Controller [1043:8294]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
01:0b.0 SCSI storage controller [0100]: Adaptec AHA-2930CU [9004:3860] (rev 03)
Subsystem: Adaptec Device [9004:3869]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00 [disabled] [size=256]
Region 1: Memory at fdefe000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at fdd00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
02:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9500 GT] [10de:0640] (rev a1) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Device [3842:c954]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at dc00 [size=128]
Expansion ROM at fbf80000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
** USB devices:
Bus 004 Device 003: ID 0c4b:0400 Reiner SCT Kartensysteme GmbH
Bus 004 Device 002: ID 03f0:8704 Hewlett-Packard DeskJet 5940
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0
APT prefers squeeze-updates
APT policy: (500, 'squeeze-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
=========================================================================
After Squeeze is installed, originally pcspkr is loaded and 'beep' does not work. However, if pcspkr is removed and snd_pcsp loaded by modprobe, 'beep' works without fault. This change compared with Lenny causes a lot of trouble concerning the use of the pc-speaker, as several files still contain a reference to pcspkr, for instance /sys/devices/platform/pcspkr, /boot/System.map-2.6.32-5-amd64, /usr/share/modconf/eval_de, /usr/src/linux-headers-2.6.32-5-amd64/.config, /usr/src/linux-headers-2.6.32-5-amd64/include/config/auto.conf, /usr/src/linux-headers-2.6.32-5-amd64/include/linux/autoconf.h, /lib/udev/rules.d/60-persistent-input.rules and others. So the pc-speaker cannot work normally when it shall be used by applications under Squeeze, for instance homebanking programs.
Reply to: