But my microphone still doesn't work :( I don't know whether I could attach file or not so I put it dmesg output 'as is' in message body.
~# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37-1-686 (Debian 2.6.37-1) (
ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 SMP Tue Feb 15 18:21:50 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb63f000 (usable)
[ 0.000000] BIOS-e820: 00000000bb63f000 - 00000000bb6bf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb6bf000 - 00000000bb7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb7bf000 - 00000000bb7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb7ff000 - 00000000bb800000 (usable)
[ 0.000000] BIOS-e820: 00000000bb800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: 1425/HP G62 Notebook PC, BIOS F.32 11/23/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 37748000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36ea0000 - 37747e92
[ 0.000000] Move RAMDISK from 0000000037748000 - 0000000037fefe91 to 36ea0000 - 37747e91
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT bb7fe120 00064 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP bb7fc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT bb7e6000 12F4C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS bb76e000 00040
[ 0.000000] ACPI: ASF! bb7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET bb7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC bb7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG bb7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC bb7e5000 00176 (v01 HPQOEM SLIC-MPC 00000001 SLIC 000F4240)
[ 0.000000] ACPI: BOOT bb7e2000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT bb7df000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2112MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bb800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bb63f
[ 0.000000] 0: 0x000bb7ff -> 0x000bb800
[ 0.000000] On node 0 totalpages: 767437
[ 0.000000] free_area_init_node: node 0, pgdat c13db440, node_mem_map f5730200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4225 pages used for memmap
[ 0.000000] HighMem zone: 536001 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5000000 s26944 r0 d22208 u524288
[ 0.000000] pcpu-alloc: s26944 r0 d22208 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 761436
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-1-686 root=UUID=3c390a5e-74ac-4532-ae02-e06479802ef5 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bb800)
[ 0.000000] Memory: 3030500k/3072000k available (2613k kernel code, 39248k reserved, 1372k data, 384k init, 2160904k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13e5000 - 0xc1445000 ( 384 kB)
[ 0.000000] .data : 0xc128d7f0 - 0xc13e4b00 (1372 kB)
[ 0.000000] .text : 0xc1000000 - 0xc128d7f0 (2613 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f4c0a000 soft=f4c0c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2127.766 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.53 BogoMIPS (lpj=8511064)
[ 0.000008] pid_max: default: 32768 minimum: 301
[ 0.000029] Security Framework initialized
[ 0.000032] SELinux: Disabled at boot.
[ 0.000049] Mount-cache hash table entries: 512
[ 0.000157] Initializing cgroup subsys ns
[ 0.000160] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.000162] Initializing cgroup subsys cpuacct
[ 0.000167] Initializing cgroup subsys devices
[ 0.000169] Initializing cgroup subsys freezer
[ 0.000171] Initializing cgroup subsys net_cls
[ 0.000173] Initializing cgroup subsys blkio
[ 0.000200] CPU: Physical Processor ID: 0
[ 0.000201] CPU: Processor Core ID: 0
[ 0.000206] mce: CPU supports 9 MCE banks
[ 0.000217] CPU0: Thermal monitoring enabled (TM1)
[ 0.000224] using mwait in idle threads.
[ 0.000228] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.000235] ... version: 3
[ 0.000236] ... bit width: 48
[ 0.000237] ... generic registers: 4
[ 0.000239] ... value mask: 0000ffffffffffff
[ 0.000241] ... max period: 000000007fffffff
[ 0.000242] ... fixed-purpose events: 3
[ 0.000243] ... event mask: 000000070000000f
[ 0.001423] ACPI: Core revision 20101013
[ 0.049450] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.049846] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.089509] CPU0: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz stepping 05
[ 0.195747] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.195840] CPU 1 irqstacks, hard=f4d22000 soft=f4d24000
[ 0.195843] Booting Node 0, Processors #1
[ 0.206103] Initializing CPU#1
[ 0.303678] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.303710] Brought up 2 CPUs
[ 0.303712] Total of 2 processors activated (8511.44 BogoMIPS).
[ 0.304334] devtmpfs: initialized
[ 0.304613] regulator: core version 0.5
[ 0.304650] regulator: dummy:
[ 0.304691] NET: Registered protocol family 16
[ 0.304772] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.304775] ACPI: bus type pci registered
[ 0.304853] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.304856] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.304858] PCI: Using MMCONFIG for extended config space
[ 0.304860] PCI: Using configuration type 1 for base access
[ 0.305174] bio: create slab <bio-0> at 0
[ 0.306863] ACPI: EC: Look up EC in DSDT
[ 0.323568] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.324420] ACPI: SSDT bb691c18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20060317)
[ 0.324799] ACPI: Dynamic OEM Table Load:
[ 0.324801] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20060317)
[ 0.325227] ACPI: SSDT bb68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20060317)
[ 0.325583] ACPI: Dynamic OEM Table Load:
[ 0.325586] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20060317)
[ 0.344031] ACPI: SSDT bb690a98 00303 (v01 PmRef ApIst 00003000 INTL 20060317)
[ 0.344460] ACPI: Dynamic OEM Table Load:
[ 0.344462] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060317)
[ 0.355722] ACPI: SSDT bb68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20060317)
[ 0.356107] ACPI: Dynamic OEM Table Load:
[ 0.356110] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060317)
[ 0.370007] ACPI: Interpreter enabled
[ 0.370013] ACPI: (supports S0 S3 S4 S5)
[ 0.370048] ACPI: Using IOAPIC for interrupt routing
[ 0.381048] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = "">[ 0.381206] ACPI: No dock devices found.
[ 0.381209] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.381957] \_SB_.PCI0:_OSC invalid UUID
[ 0.381958] _OSC request data:1 8 1f
[ 0.381962] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.383302] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.383305] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.383308] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.383311] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
[ 0.383323] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.383343] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.383362] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.383374] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.383381] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.383386] pci 0000:00:02.0: reg 20: [io 0x4050-0x4057]
[ 0.383448] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.383478] pci 0000:00:16.0: reg 10: [mem 0xd4406100-0xd440610f 64bit]
[ 0.383553] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.383559] pci 0000:00:16.0: PME# disabled
[ 0.383601] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.383960] pci 0000:00:1a.0: reg 10: [mem 0xd4405c00-0xd4405fff]
[ 0.386017] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.386022] pci 0000:00:1a.0: PME# disabled
[ 0.386053] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.386075] pci 0000:00:1b.0: reg 10: [mem 0xd4400000-0xd4403fff 64bit]
[ 0.386153] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.386158] pci 0000:00:1b.0: PME# disabled
[ 0.386186] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.386266] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.386271] pci 0000:00:1c.0: PME# disabled
[ 0.386300] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 0.386380] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.386385] pci 0000:00:1c.1: PME# disabled
[ 0.386428] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.386781] pci 0000:00:1d.0: reg 10: [mem 0xd4405800-0xd4405bff]
[ 0.388842] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.388847] pci 0000:00:1d.0: PME# disabled
[ 0.388872] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.388950] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 0.389073] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 0.389100] pci 0000:00:1f.2: reg 10: [io 0x4048-0x404f]
[ 0.389112] pci 0000:00:1f.2: reg 14: [io 0x405c-0x405f]
[ 0.389123] pci 0000:00:1f.2: reg 18: [io 0x4040-0x4047]
[ 0.389134] pci 0000:00:1f.2: reg 1c: [io 0x4058-0x405b]
[ 0.389146] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
[ 0.389157] pci 0000:00:1f.2: reg 24: [mem 0xd4405000-0xd44057ff]
[ 0.389207] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.389212] pci 0000:00:1f.2: PME# disabled
[ 0.389236] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.389256] pci 0000:00:1f.3: reg 10: [mem 0xd4406000-0xd44060ff 64bit]
[ 0.389288] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
[ 0.389337] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.389366] pci 0000:00:1f.6: reg 10: [mem 0xd4404000-0xd4404fff 64bit]
[ 0.389534] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 0.389564] pci 0000:02:00.0: reg 10: [mem 0xd3400000-0xd340ffff 64bit]
[ 0.389674] pci 0000:02:00.0: supports D1
[ 0.389676] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.389683] pci 0000:02:00.0: PME# disabled
[ 0.389718] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.389723] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.389728] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff]
[ 0.389736] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.389853] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.389918] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.390028] pci 0000:03:00.0: reg 18: [mem 0xd1410000-0xd1410fff 64bit pref]
[ 0.390099] pci 0000:03:00.0: reg 20: [mem 0xd1400000-0xd140ffff 64bit pref]
[ 0.390146] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.390303] pci 0000:03:00.0: supports D1 D2
[ 0.390305] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.390320] pci 0000:03:00.0: PME# disabled
[ 0.390371] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.390376] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.390381] pci 0000:00:1c.1: bridge window [mem 0xd2400000-0xd33fffff]
[ 0.390389] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.390464] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.390470] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.390476] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.390483] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.390486] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.390489] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.390491] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.390494] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[ 0.390513] pci_bus 0000:00: on NUMA node 0
[ 0.390516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.390669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.390689] ACPI Warning: For \_SB_.PCI0.P0P1._PRT: Return Package has no elements (empty) (20101013/nspredef-456)
[ 0.390717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.390758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.390869] \_SB_.PCI0:_OSC invalid UUID
[ 0.390870] _OSC request data:1 19 1f
[ 0.394758] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.394851] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.394872] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.394892] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.394910] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.394928] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.394946] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.394973] pci_bus 0000:ff: on NUMA node 0
[ 0.395239] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0
[ 0.395305] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.395368] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.395432] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.395496] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.395560] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.395623] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.395693] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.395721] HEST: Table is not found!
[ 0.395775] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.395784] vgaarb: loaded
[ 0.395834] PCI: Using ACPI for IRQ routing
[ 0.395837] PCI: pci_cache_line_size set to 64 bytes
[ 0.395929] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[ 0.395931] reserve RAM buffer: 00000000bb63f000 - 00000000bbffffff
[ 0.395934] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff
[ 0.396040] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.396046] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.398063] Switching to clocksource tsc
[ 0.398970] pnp: PnP ACPI init
[ 0.398987] ACPI: bus type pnp registered
[ 0.399981] pnp 00:00: [bus 00-fe]
[ 0.399985] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.399988] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.399989] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.399992] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.399994] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.399996] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.399998] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.400000] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.400002] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.400004] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.400006] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.400008] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.400010] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.400013] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.400015] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.400017] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.400019] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.400021] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[ 0.400069] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.400123] pnp 00:01: [io 0x0000-0x001f]
[ 0.400125] pnp 00:01: [io 0x0081-0x0091]
[ 0.400127] pnp 00:01: [io 0x0093-0x009f]
[ 0.400129] pnp 00:01: [io 0x00c0-0x00df]
[ 0.400131] pnp 00:01: [dma 4]
[ 0.400160] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.400167] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.400195] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.400311] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.400341] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.400351] pnp 00:04: [io 0x00f0]
[ 0.400358] pnp 00:04: [irq 13]
[ 0.400388] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.400398] pnp 00:05: [io 0x002e-0x002f]
[ 0.400400] pnp 00:05: [io 0x004e-0x004f]
[ 0.400402] pnp 00:05: [io 0x0061]
[ 0.400404] pnp 00:05: [io 0x0063]
[ 0.400405] pnp 00:05: [io 0x0065]
[ 0.400407] pnp 00:05: [io 0x0067]
[ 0.400408] pnp 00:05: [io 0x0070]
[ 0.400410] pnp 00:05: [io 0x0080]
[ 0.400411] pnp 00:05: [io 0x0092]
[ 0.400413] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.400415] pnp 00:05: [io 0x0680-0x069f]
[ 0.400417] pnp 00:05: [io 0x0800-0x080f]
[ 0.400418] pnp 00:05: [io 0xffff]
[ 0.400420] pnp 00:05: [io 0xffff]
[ 0.400422] pnp 00:05: [io 0x0400-0x047f]
[ 0.400423] pnp 00:05: [io 0x0500-0x057f]
[ 0.400425] pnp 00:05: [io 0x164e-0x164f]
[ 0.400427] pnp 00:05: [io 0x0380-0x038e]
[ 0.400475] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.400483] pnp 00:06: [io 0x0070-0x0077]
[ 0.400488] pnp 00:06: [irq 8]
[ 0.400517] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.400526] pnp 00:07: [io 0x0060]
[ 0.400528] pnp 00:07: [io 0x0064]
[ 0.400532] pnp 00:07: [irq 1]
[ 0.400563] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.400581] pnp 00:08: [irq 12]
[ 0.400612] pnp 00:08: Plug and Play ACPI device, IDs SYN1e26 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.401004] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.401006] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[ 0.401008] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 0.401010] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 0.401012] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.401014] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.401016] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.401018] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.401020] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.401022] pnp 00:09: [mem 0xd4500000-0xd4500fff]
[ 0.401075] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401279] pnp 00:0a: [bus ff]
[ 0.401319] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.401334] pnp: PnP ACPI: found 11 devices
[ 0.401335] ACPI: ACPI bus type pnp unregistered
[ 0.401338] PnPBIOS: Disabled by ACPI PNP
[ 0.401347] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.401350] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.401352] system 00:05: [io 0xffff] has been reserved
[ 0.401354] system 00:05: [io 0xffff] has been reserved
[ 0.401357] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.401359] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.401362] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.401364] system 00:05: [io 0x0380-0x038e] has been reserved
[ 0.401370] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.401372] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.401376] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.401379] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.401382] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.401384] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.401387] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.401390] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.401392] system 00:09: [mem 0xd4500000-0xd4500fff] has been reserved
[ 0.437502] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.437538] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.437542] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.437549] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff]
[ 0.437554] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.437564] pci 0000:03:00.0: BAR 6: assigned [mem 0xd1420000-0xd142ffff pref]
[ 0.437567] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.437570] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.437577] pci 0000:00:1c.1: bridge window [mem 0xd2400000-0xd33fffff]
[ 0.437583] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.437591] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.437592] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.437598] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.437603] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.437621] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.437626] pci 0000:00:1c.0: setting latency timer to 64
[ 0.437636] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.437641] pci 0000:00:1c.1: setting latency timer to 64
[ 0.437649] pci 0000:00:1e.0: setting latency timer to 64
[ 0.437654] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.437656] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.437658] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.437661] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[ 0.437663] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.437665] pci_bus 0000:02: resource 1 [mem 0xd3400000-0xd43fffff]
[ 0.437667] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.437670] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.437672] pci_bus 0000:03: resource 1 [mem 0xd2400000-0xd33fffff]
[ 0.437674] pci_bus 0000:03: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.437676] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.437679] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.437681] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.437683] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff]
[ 0.437709] NET: Registered protocol family 2
[ 0.437756] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.437907] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.438199] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.438319] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.438321] TCP reno registered
[ 0.438324] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.438330] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.438424] NET: Registered protocol family 1
[ 0.438437] pci 0000:00:02.0: Boot video device
[ 0.467664] PCI: CLS 64 bytes, default 64
[ 0.467717] Unpacking initramfs...
[ 0.705574] Freeing initrd memory: 8864k freed
[ 0.707532] Simple Boot Flag at 0x44 set to 0x1
[ 0.707828] audit: initializing netlink socket (disabled)
[ 0.707839] type=2000 audit(1298025378.560:1): initialized
[ 0.716232] highmem bounce pool size: 64 pages
[ 0.716236] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.717706] VFS: Disk quotas dquot_6.5.2
[ 0.717762] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.717838] msgmni has been set to 1715
[ 0.717980] alg: No test for stdrng (krng)
[ 0.718024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.718027] io scheduler noop registered
[ 0.718028] io scheduler deadline registered
[ 0.718038] io scheduler cfq registered (default)
[ 0.718196] \_SB_.PCI0:_OSC invalid UUID
[ 0.718197] _OSC request data:1 0 1d
[ 0.718259] \_SB_.PCI0:_OSC invalid UUID
[ 0.718261] _OSC request data:1 0 1d
[ 0.718377] ERST: Table is not found!
[ 0.718392] isapnp: Scanning for PnP cards...
[ 1.072338] isapnp: No Plug & Play device found
[ 1.072566] Linux agpgart interface v0.103
[ 1.072662] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.072732] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.073200] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.094711] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.094773] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.153959] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.169554] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.169558] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.169625] mice: PS/2 mouse device common for all mice
[ 1.169667] rtc_cmos 00:06: RTC can wake from S4
[ 1.173759] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.173790] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.173800] cpuidle: using governor ladder
[ 1.173801] cpuidle: using governor menu
[ 1.174010] TCP cubic registered
[ 1.174114] NET: Registered protocol family 10
[ 1.174421] lo: Disabled Privacy Extensions
[ 1.174576] Mobile IPv6
[ 1.174579] NET: Registered protocol family 17
[ 1.174583] Registering the dns_resolver key type
[ 1.174600] Using IPI No-Shortcut mode
[ 1.174673] PM: Hibernation image not present or could not be loaded.
[ 1.174682] registered taskstats version 1
[ 1.175049] rtc_cmos 00:06: setting system clock to 2011-02-18 10:36:19 UTC (1298025379)
[ 1.175090] Initalizing network drop monitor service
[ 1.175134] Freeing unused kernel memory: 384k freed
[ 1.175245] Write protecting the kernel text: 2616k
[ 1.175261] Write protecting the kernel read-only data: 980k
[ 1.187381] udev[50]: starting version 164
[ 1.188032] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.283234] usbcore: registered new interface driver usbfs
[ 1.283356] usbcore: registered new interface driver hub
[ 1.283389] usbcore: registered new device driver usb
[ 1.286586] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.286612] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.286668] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.286673] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.286693] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.287150] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.287174] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.287267] r8169 0000:03:00.0: setting latency timer to 64
[ 1.287449] r8169 0000:03:00.0: irq 40 for MSI/MSI-X
[ 1.288002] r8169 0000:03:00.0: eth0: RTL8102e at 0xf82d8000, 98:4b:e1:94:ae:b3, XID 04e00000 IRQ 40
[ 1.288402] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.288404] ACPI: Thermal Zone [TZ01] (56 C)
[ 1.288589] SCSI subsystem initialized
[ 1.305883] libata version 3.00 loaded.
[ 1.313824] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.317715] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.317734] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4405c00
[ 1.333586] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.333634] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.333640] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.333645] usb usb1: Product: EHCI Host Controller
[ 1.333649] usb usb1: Manufacturer: Linux 2.6.37-1-686 ehci_hcd
[ 1.333653] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.333775] hub 1-0:1.0: USB hub found
[ 1.333779] hub 1-0:1.0: 3 ports detected
[ 1.333860] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.333878] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.333881] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.333888] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.353605] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.357489] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.357503] ehci_hcd 0000:00:1d.0: irq 21, io mem 0xd4405800
[ 1.369572] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.369600] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.369606] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.369611] usb usb2: Product: EHCI Host Controller
[ 1.369615] usb usb2: Manufacturer: Linux 2.6.37-1-686 ehci_hcd
[ 1.369619] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.369729] hub 2-0:1.0: USB hub found
[ 1.369733] hub 2-0:1.0: 3 ports detected
[ 1.369798] ahci 0000:00:1f.2: version 3.0
[ 1.369811] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.369852] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.369984] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.369988] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst
[ 1.369993] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.378033] scsi0 : ahci
[ 1.378127] scsi1 : ahci
[ 1.378200] scsi2 : ahci
[ 1.378267] scsi3 : ahci
[ 1.378322] ata1: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405100 irq 41
[ 1.378326] ata2: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405180 irq 41
[ 1.378328] ata3: DUMMY
[ 1.378329] ata4: DUMMY
[ 1.645429] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.697415] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.697450] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.698611] ata1.00: ATA-8: WDC WD3200BEVT-60A23T0, 02.01A02, max UDMA/100
[ 1.698618] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.699880] ata1.00: configured for UDMA/100
[ 1.700025] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-6 02.0 PQ: 0 ANSI: 5
[ 1.703249] ata2.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100
[ 1.704597] ata2.00: configured for UDMA/100
[ 1.708526] scsi 1:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5
[ 1.718806] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.718869] sd 0:0:0:0: [sda] Write Protect is off
[ 1.718872] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.718895] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.727684] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.727690] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.727817] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.777720] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.777727] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.777992] hub 1-1:1.0: USB hub found
[ 1.778082] hub 1-1:1.0: 6 ports detected
[ 1.828708] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.829059] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.833352] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.833872] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.889303] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 2.021618] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.021625] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.021892] hub 2-1:1.0: USB hub found
[ 2.021980] hub 2-1:1.0: 8 ports detected
[ 2.093340] usb 1-1.5: new high speed USB device using ehci_hcd and address 3
[ 2.439188] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[ 2.439196] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.439201] usb 1-1.5: Product: USB2.0-CRW
[ 2.439205] usb 1-1.5: Manufacturer: Generic
[ 2.439209] usb 1-1.5: SerialNumber: 20071114173400000
[ 2.446864] usb 1-1.5: selecting invalid altsetting 1
[ 2.446883] usbcore: registered new interface driver uas
[ 2.451454] Initializing USB Mass Storage driver...
[ 2.451515] scsi4 : usb-storage 1-1.5:1.0
[ 2.451592] usbcore: registered new interface driver usb-storage
[ 2.451594] USB Mass Storage support registered.
[ 2.513044] usb 2-1.5: new high speed USB device using ehci_hcd and address 3
[ 2.611848] PM: Starting manual resume from disk
[ 2.611851] PM: Hibernation image partition 8:1 present
[ 2.611853] PM: Looking for hibernation image.
[ 2.628372] PM: Image not found (code -22)
[ 2.628377] PM: Hibernation image not present or could not be loaded.
[ 2.657807] EXT3-fs: barriers not enabled
[ 2.679846] kjournald starting. Commit interval 5 seconds
[ 2.679943] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 2.749806] usb 2-1.5: New USB device found, idVendor=064e, idProduct=f203
[ 2.749814] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.749819] usb 2-1.5: Product: HP Webcam-101
[ 2.749823] usb 2-1.5: Manufacturer: SuYin
[ 2.749827] usb 2-1.5: SerialNumber: HF0317-J311-SE01-VH-R02.01.01
[ 3.450919] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 3.451386] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.455392] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4.327245] udev[424]: starting version 164
[ 4.563306] wmi: Mapper loaded
[ 4.579698] ACPI: acpi_idle registered with cpuidle
[ 4.584233] Monitor-Mwait will be used to enter C-1 state
[ 4.584254] Monitor-Mwait will be used to enter C-2 state
[ 4.709248] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 4.709254] ACPI: Power Button [PWRB]
[ 4.709303] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 4.710247] ACPI: Lid Switch [LID0]
[ 4.710348] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.710352] ACPI: Power Button [PWRF]
[ 4.784141] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.806858] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.822319] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.822326] ACPI: resource 0000:00:1f.3 [io 0x4000-0x401f] conflicts with ACPI region SMBI [??? 0x00004000-0x0000400f flags 0x49]
[ 4.822328] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.822720] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.008025] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 5.047306] ACPI: Battery Slot [BAT0] (battery present)
[ 5.051191] ACPI: AC Adapter [ACAD] (off-line)
[ 5.057384] cfg80211: Calling CRDA to update world regulatory domain
[ 5.356371] [drm] Initialized drm 1.1.0 20060810
[ 5.449871] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.449876] i915 0000:00:02.0: setting latency timer to 64
[ 5.465500] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 5.518726] Linux video capture interface: v2.00
[ 5.530688] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.562636] uvcvideo: Found UVC 1.00 device HP Webcam-101 (064e:f203)
[ 5.567765] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input6
[ 5.567891] usbcore: registered new interface driver uvcvideo
[ 5.567893] USB Video Class driver (v1.0.0)
[ 5.653211] Console: switching to colour frame buffer device 170x48
[ 5.657208] fb0: inteldrmfb frame buffer device
[ 5.657210] drm: registered panic notifier
[ 5.673155] ACPI Warning: _BQC returned an invalid level (20101013/video-527)
[ 5.673640] acpi device:02: registered as cooling_device2
[ 5.674109] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 5.674196] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.674493] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.674535] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.674600] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 5.674629] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.674829] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.674841] ath9k 0000:02:00.0: setting latency timer to 64
[ 5.725575] ath: EEPROM regdomain: 0x60
[ 5.725577] ath: EEPROM indicates we should expect a direct regpair map
[ 5.725580] ath: Country alpha2 being used: 00
[ 5.725582] ath: Regpair used: 0x60
[ 5.743114] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0xa0400
[ 5.809235] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 5.809708] Registered led device: ath9k-phy0::radio
[ 5.809729] Registered led device: ath9k-phy0::assoc
[ 5.809749] Registered led device: ath9k-phy0::tx
[ 5.809770] Registered led device: ath9k-phy0::rx
[ 5.809776] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf96a0000, irq=16
[ 5.818302] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 5.905890] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 7.374985] Adding 5858300k swap on /dev/sda1. Priority:-1 extents:1 across:5858300k
[ 7.916582] EXT3-fs (sda2): using internal journal
[ 8.037970] loop: module loaded
[ 9.977458] EXT3-fs: barriers not enabled
[ 9.977736] kjournald starting. Commit interval 5 seconds
[ 9.978055] EXT3-fs (sda7): using internal journal
[ 9.978063] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 10.017272] EXT3-fs: barriers not enabled
[ 10.017533] kjournald starting. Commit interval 5 seconds
[ 10.017824] EXT3-fs (sda5): using internal journal
[ 10.017831] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 10.101375] EXT3-fs: barriers not enabled
[ 10.101696] kjournald starting. Commit interval 5 seconds
[ 10.102037] EXT3-fs (sda6): using internal journal
[ 10.102046] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 12.684189] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.035534] fuse init (API version 7.15)
[ 13.818664] wlan0: authenticate with 00:26:5a:95:8b:cc (try 1)
[ 13.820687] wlan0: authenticated
[ 13.820710] wlan0: associate with 00:26:5a:95:8b:cc (try 1)
[ 13.823012] wlan0: RX AssocResp from 00:26:5a:95:8b:cc (capab=0x411 status=0 aid=1)
[ 13.823020] wlan0: associated
[ 13.823210] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 14.319611] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 14.319615] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 14.319616] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 14.319617] vboxdrv: the usage of hardware performance counters by
[ 14.319618] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 14.319808] vboxdrv: Found 2 processor cores.
[ 14.319880] vboxdrv: fAsync=0 offMin=0x18c offMax=0x748
[ 14.319925] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 14.319927] vboxdrv: Successfully loaded version 3.2.10_OSE (interface 0x00140001).
[ 15.243004] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 15.899492] apm: BIOS not found.
[ 17.088689] lp: driver loaded but no devices found
[ 17.672159] ppdev: user-space parallel port driver
[ 17.709903] Bluetooth: Core ver 2.15
[ 17.709919] NET: Registered protocol family 31
[ 17.709920] Bluetooth: HCI device and connection manager initialized
[ 17.709923] Bluetooth: HCI socket layer initialized
[ 18.285487] Bluetooth: L2CAP ver 2.15
[ 18.285489] Bluetooth: L2CAP socket layer initialized
[ 18.404000] Bluetooth: RFCOMM TTY layer initialized
[ 18.404003] Bluetooth: RFCOMM socket layer initialized
[ 18.404005] Bluetooth: RFCOMM ver 1.11
[ 18.425881] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.425883] Bluetooth: BNEP filters: protocol multicast
[ 18.663800] Bridge firewalling registered
[ 19.081848] r8169 0000:03:00.0: eth0: link down
[ 19.082020] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.147643] Bluetooth: SCO (Voice Link) ver 0.6
[ 19.147646] Bluetooth: SCO socket layer initialized
[ 21.048034] tun: Universal TUN/TAP device driver, 1.6
[ 21.048037] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 21.048461] tun0: Disabled Privacy Extensions
[ 23.865608] sshd (2091): /proc/2091/oom_adj is deprecated, please use /proc/2091/oom_score_adj instead.
[ 24.101466] wlan0: no IPv6 routers present
[ 113.582851] process `skype' is using obsolete setsockopt SO_BSDCOMPAT